Re: [PATCH v1 09/17] drm/mediatek: add OVL support multi-layer

[CK Hu <ck.hu@mediatek.com>]

Hi, Jason:

On Wed, 2021-07-07 at 12:12 +0800, jason-jh.lin wrote:
> Add datapath_con settings to support multi-layer output.


What is multi-layer output? Why we need this?

> 
> Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 15 ++++++++++++---
>  1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index 7504e86b167a..95fd5e00eb91 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -18,14 +18,17 @@
>  #include "mtk_drm_ddp_comp.h"
>  
>  #define DISP_REG_OVL_INTEN			0x0004
> -#define OVL_FME_CPL_INT					BIT(1)
> +#define OVL_FME_CPL_INT				BIT(1)
>  #define DISP_REG_OVL_INTSTA			0x0008
>  #define DISP_REG_OVL_EN				0x000c
>  #define DISP_REG_OVL_RST			0x0014
>  #define DISP_REG_OVL_ROI_SIZE			0x0020
>  #define DISP_REG_OVL_DATAPATH_CON		0x0024
> -#define OVL_LAYER_SMI_ID_EN				BIT(0)
> -#define OVL_BGCLR_SEL_IN				BIT(2)
> +#define OVL_LAYER_SMI_ID_EN			BIT(0)
> +#define OVL_BGCLR_SEL_IN			BIT(2)
> +#define OVL_GCLAST_EN				BIT(24)
> +#define OVL_HDR_GCLAST_EN			BIT(25)
> +#define OVL_OUTPUT_CLAMP			BIT(26)
>  #define DISP_REG_OVL_ROI_BGCLR			0x0028
>  #define DISP_REG_OVL_SRC_CON			0x002c
>  #define DISP_REG_OVL_CON(n)			(0x0030 + 0x20 * (n))
> @@ -222,6 +225,7 @@ void mtk_ovl_layer_on(struct device *dev, unsigned int idx,
>  	unsigned int gmc_thrshd_l;
>  	unsigned int gmc_thrshd_h;
>  	unsigned int gmc_value;
> +	unsigned int datapatch_con;
>  	struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
>  
>  	mtk_ddp_write(cmdq_pkt, 0x1, &ovl->cmdq_reg, ovl->regs,
> @@ -237,6 +241,11 @@ void mtk_ovl_layer_on(struct device *dev, unsigned int idx,
>  			    gmc_thrshd_h << 16 | gmc_thrshd_h << 24;
>  	mtk_ddp_write(cmdq_pkt, gmc_value,
>  		      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_RDMA_GMC(idx));
> +
> +	datapatch_con = OVL_GCLAST_EN | OVL_HDR_GCLAST_EN | OVL_OUTPUT_CLAMP;
> +	mtk_ddp_write_mask(cmdq_pkt, datapatch_con, &ovl->cmdq_reg, ovl->regs,
> +				 DISP_REG_OVL_DATAPATH_CON, datapatch_con);

For mt8173 or other SoC, this does not turn on. Now you turn on this,
would this influence other SoC?

Regards,
CK

> +
>  	mtk_ddp_write_mask(cmdq_pkt, BIT(idx), &ovl->cmdq_reg, ovl->regs,
>  			   DISP_REG_OVL_SRC_CON, BIT(idx));
>  }

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek