All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: Jaehoon Chung <jh80.chung@samsung.com>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
	Chris Ball <chris@printf.net>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	tgih.jun@samsung.com, devicetree@vger.kernel.org,
	dinguyen@altera.com, Mark Rutland <mark.rutland@arm.com>,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv2 4/5] ARM: dts: rockchip: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
Date: Fri, 04 Jul 2014 13:19:49 +0200	[thread overview]
Message-ID: <1641373.ldKZaK4qer@diego> (raw)
In-Reply-To: <1404128960-27225-5-git-send-email-jh80.chung@samsung.com>

Am Montag, 30. Juni 2014, 20:49:18 schrieb Jaehoon Chung:
> dw-mmc controller can support multiple slots.
> But, there are no use-cases anywhere. So we don't need to support the
> slot-node for dw-mmc controller.
> And "supports-highspeed" property in dw-mmc is deprecated.
> "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
> 
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Reviewed-by: Tushar Behera <trblinux@gmail.com>
> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> ---
>  arch/arm/boot/dts/rk3066a-bqcurie2.dts |   16 ++++------------
>  1 file changed, 4 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index afb3273..ecea889 100644
> --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> @@ -59,12 +59,8 @@
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
>  			vmmc-supply = <&vcc_sd0>;
> -
> -			slot@0 {
> -				reg = <0>;
> -				bus-width = <4>;
> -				disable-wp;
> -			};
> +			bus-width = <4>;
> +			disable-wp;
>  		};
> 
>  		dwmmc@10218000 { /* wifi */
> @@ -74,12 +70,8 @@
> 
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
> -
> -			slot@0 {
> -				reg = <0>;
> -				bus-width = <4>;
> -				disable-wp;
> -			};
> +			bus-width = <4>;
> +			disable-wp;
>  		};
> 
>  		gpio-keys {

WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 4/5] ARM: dts: rockchip: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
Date: Fri, 04 Jul 2014 13:19:49 +0200	[thread overview]
Message-ID: <1641373.ldKZaK4qer@diego> (raw)
In-Reply-To: <1404128960-27225-5-git-send-email-jh80.chung@samsung.com>

Am Montag, 30. Juni 2014, 20:49:18 schrieb Jaehoon Chung:
> dw-mmc controller can support multiple slots.
> But, there are no use-cases anywhere. So we don't need to support the
> slot-node for dw-mmc controller.
> And "supports-highspeed" property in dw-mmc is deprecated.
> "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
> 
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Reviewed-by: Tushar Behera <trblinux@gmail.com>
> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> ---
>  arch/arm/boot/dts/rk3066a-bqcurie2.dts |   16 ++++------------
>  1 file changed, 4 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index afb3273..ecea889 100644
> --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
> @@ -59,12 +59,8 @@
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
>  			vmmc-supply = <&vcc_sd0>;
> -
> -			slot at 0 {
> -				reg = <0>;
> -				bus-width = <4>;
> -				disable-wp;
> -			};
> +			bus-width = <4>;
> +			disable-wp;
>  		};
> 
>  		dwmmc at 10218000 { /* wifi */
> @@ -74,12 +70,8 @@
> 
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
> -
> -			slot at 0 {
> -				reg = <0>;
> -				bus-width = <4>;
> -				disable-wp;
> -			};
> +			bus-width = <4>;
> +			disable-wp;
>  		};
> 
>  		gpio-keys {

  reply	other threads:[~2014-07-04 11:19 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-30 11:49 [PATCHv2 0/5] ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc Jaehoon Chung
2014-06-30 11:49 ` Jaehoon Chung
2014-06-30 11:49 ` [PATCHv2 1/5] mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed Jaehoon Chung
2014-06-30 11:49   ` Jaehoon Chung
2014-06-30 11:49 ` [PATCHv2 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc Jaehoon Chung
2014-06-30 11:49   ` Jaehoon Chung
2014-07-07  7:29   ` Seungwon Jeon
2014-07-07  7:29     ` Seungwon Jeon
2014-07-07  7:33     ` Jaehoon Chung
2014-07-07  7:33       ` Jaehoon Chung
2014-06-30 11:49 ` [PATCHv2 3/5] ARM: dts: socfpga: " Jaehoon Chung
2014-06-30 11:49   ` Jaehoon Chung
2014-06-30 11:49 ` [PATCHv2 4/5] ARM: dts: rockchip: " Jaehoon Chung
2014-06-30 11:49   ` Jaehoon Chung
2014-07-04 11:19   ` Heiko Stübner [this message]
2014-07-04 11:19     ` Heiko Stübner
2014-06-30 11:49 ` [PATCHv2 5/5] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk Jaehoon Chung
2014-06-30 11:49   ` Jaehoon Chung
2014-07-07  9:19   ` Seungwon Jeon
2014-07-07  9:19     ` Seungwon Jeon
2014-07-07 11:00     ` Jaehoon Chung
2014-07-07 11:00       ` Jaehoon Chung
2014-07-01  8:26 ` [PATCHv2 0/5] ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc Sachin Kamat
2014-07-01  8:26   ` Sachin Kamat
2014-07-04 11:06   ` Jaehoon Chung
2014-07-04 11:06     ` Jaehoon Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1641373.ldKZaK4qer@diego \
    --to=heiko@sntech.de \
    --cc=chris@printf.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@altera.com \
    --cc=jh80.chung@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=tgih.jun@samsung.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.