From: "Michal Malý" <madcatxster@prifuk.cz>
To: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, dmitry.torokhov@gmail.com,
anssi.hannula@gmail.com, elias.vds@gmail.com, jkosina@suse.cz,
simon@mungewell.org
Subject: [PATCH v2 2/4] Port hid-lg4ff to ff-memless-next
Date: Mon, 24 Feb 2014 00:32:23 +0100 [thread overview]
Message-ID: <1646498.7GVfWfMn8D@geidi-prime> (raw)
In-Reply-To: <1516865.M993BQAYe4@geidi-prime>
Port hid-lg4ff to ff-memless-next
Tested-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Michal Malý <madcatxster@prifuk.cz>
---
v2: Differentiate between "set force to zero" and "stop force completely"
drivers/hid/Kconfig | 2 +-
drivers/hid/hid-lg4ff.c | 86 +++++++++++++++++++++++++++++--------------------
2 files changed, 52 insertions(+), 36 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index f722001..11ac17e 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -390,7 +390,7 @@ config LOGIG940_FF
config LOGIWHEELS_FF
bool "Logitech wheels configuration and force feedback support"
depends on HID_LOGITECH
- select INPUT_FF_MEMLESS
+ select INPUT_FF_MEMLESS_NEXT
default LOGITECH_FF
help
Say Y here if you want to enable force feedback and range setting
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index befe0e3..95d2a9f 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -25,6 +25,7 @@
#include <linux/input.h>
+#include <linux/input/ff-memless-next.h>
#include <linux/usb.h>
#include <linux/hid.h>
@@ -44,6 +45,8 @@
#define G27_REV_MAJ 0x12
#define G27_REV_MIN 0x38
+#define FF_UPDATE_RATE 8
+
#define to_hid_device(pdev) container_of(pdev, struct hid_device, dev)
static void hid_lg4ff_set_range_dfp(struct hid_device *hid, u16 range);
@@ -182,47 +185,60 @@ int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field,
}
}
-static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
+static int hid_lg4ff_start_combined(struct hid_device *hid, struct hid_report *report,
+ const struct mlnx_simple_force *force)
+{
+ __s32 *value = report->field[0]->value;
+ int scaled_x;
+
+ /* Scale down from MLNX range */
+ scaled_x = 0x80 - (force->x * 0xff / 0xffff);
+
+ value[0] = 0x11; /* Slot 1 */
+ value[1] = 0x08;
+ value[2] = scaled_x;
+ value[3] = 0x80;
+ value[4] = 0x00;
+ value[5] = 0x00;
+ value[6] = 0x00;
+
+ hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ return 0;
+}
+
+static int hid_lg4ff_stop_combined(struct hid_device *hid, struct hid_report *report)
+{
+ __s32 *value = report->field[0]->value;
+
+ value[0] = 0x13; /* Slot 1 */
+ value[1] = 0x00;
+ value[2] = 0x00;
+ value[3] = 0x00;
+ value[4] = 0x00;
+ value[5] = 0x00;
+ value[6] = 0x00;
+
+ hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ return 0;
+}
+
+static int hid_lg4ff_control(struct input_dev *dev, void *data, const struct mlnx_effect_command *command)
{
struct hid_device *hid = input_get_drvdata(dev);
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
- __s32 *value = report->field[0]->value;
- int x;
-
-#define CLAMP(x) do { if (x < 0) x = 0; else if (x > 0xff) x = 0xff; } while (0)
-
- switch (effect->type) {
- case FF_CONSTANT:
- x = effect->u.ramp.start_level + 0x80; /* 0x80 is no force */
- CLAMP(x);
-
- if (x == 0x80) {
- /* De-activate force in slot-1*/
- value[0] = 0x13;
- value[1] = 0x00;
- value[2] = 0x00;
- value[3] = 0x00;
- value[4] = 0x00;
- value[5] = 0x00;
- value[6] = 0x00;
-
- hid_hw_request(hid, report, HID_REQ_SET_REPORT);
- return 0;
- }
-
- value[0] = 0x11; /* Slot 1 */
- value[1] = 0x08;
- value[2] = x;
- value[3] = 0x80;
- value[4] = 0x00;
- value[5] = 0x00;
- value[6] = 0x00;
- hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ switch (command->cmd) {
+ case MLNX_START_COMBINED:
+ return hid_lg4ff_start_combined(hid, report, &command->u.simple_force);
+ break;
+ case MLNX_STOP_COMBINED:
+ return hid_lg4ff_stop_combined(hid, report);
break;
+ default:
+ dbg_hid("Unsupported effect command");
+ return -EINVAL;
}
- return 0;
}
/* Sends default autocentering command compatible with
@@ -608,7 +624,7 @@ int lg4ff_init(struct hid_device *hid)
for (j = 0; lg4ff_devices[i].ff_effects[j] >= 0; j++)
set_bit(lg4ff_devices[i].ff_effects[j], dev->ffbit);
- error = input_ff_create_memless(dev, NULL, hid_lg4ff_play);
+ error = input_ff_create_mlnx(dev, (void *)NULL, hid_lg4ff_control, FF_UPDATE_RATE);
if (error)
return error;
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: "Michal Malý" <madcatxster@prifuk.cz>
To: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, dmitry.torokhov@gmail.com,
anssi.hannula@gmail.com, elias.vds@gmail.com, jkosina@suse.cz,
simon@mungewell.org
Subject: [PATCH v2 2/4] Port hid-lg4ff to ff-memless-next
Date: Mon, 24 Feb 2014 00:32:23 +0100 [thread overview]
Message-ID: <1646498.7GVfWfMn8D@geidi-prime> (raw)
In-Reply-To: <1516865.M993BQAYe4@geidi-prime>
Port hid-lg4ff to ff-memless-next
Tested-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Michal Malý <madcatxster@prifuk.cz>
---
v2: Differentiate between "set force to zero" and "stop force completely"
drivers/hid/Kconfig | 2 +-
drivers/hid/hid-lg4ff.c | 86 +++++++++++++++++++++++++++++--------------------
2 files changed, 52 insertions(+), 36 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index f722001..11ac17e 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -390,7 +390,7 @@ config LOGIG940_FF
config LOGIWHEELS_FF
bool "Logitech wheels configuration and force feedback support"
depends on HID_LOGITECH
- select INPUT_FF_MEMLESS
+ select INPUT_FF_MEMLESS_NEXT
default LOGITECH_FF
help
Say Y here if you want to enable force feedback and range setting
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index befe0e3..95d2a9f 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -25,6 +25,7 @@
#include <linux/input.h>
+#include <linux/input/ff-memless-next.h>
#include <linux/usb.h>
#include <linux/hid.h>
@@ -44,6 +45,8 @@
#define G27_REV_MAJ 0x12
#define G27_REV_MIN 0x38
+#define FF_UPDATE_RATE 8
+
#define to_hid_device(pdev) container_of(pdev, struct hid_device, dev)
static void hid_lg4ff_set_range_dfp(struct hid_device *hid, u16 range);
@@ -182,47 +185,60 @@ int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field,
}
}
-static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
+static int hid_lg4ff_start_combined(struct hid_device *hid, struct hid_report *report,
+ const struct mlnx_simple_force *force)
+{
+ __s32 *value = report->field[0]->value;
+ int scaled_x;
+
+ /* Scale down from MLNX range */
+ scaled_x = 0x80 - (force->x * 0xff / 0xffff);
+
+ value[0] = 0x11; /* Slot 1 */
+ value[1] = 0x08;
+ value[2] = scaled_x;
+ value[3] = 0x80;
+ value[4] = 0x00;
+ value[5] = 0x00;
+ value[6] = 0x00;
+
+ hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ return 0;
+}
+
+static int hid_lg4ff_stop_combined(struct hid_device *hid, struct hid_report *report)
+{
+ __s32 *value = report->field[0]->value;
+
+ value[0] = 0x13; /* Slot 1 */
+ value[1] = 0x00;
+ value[2] = 0x00;
+ value[3] = 0x00;
+ value[4] = 0x00;
+ value[5] = 0x00;
+ value[6] = 0x00;
+
+ hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ return 0;
+}
+
+static int hid_lg4ff_control(struct input_dev *dev, void *data, const struct mlnx_effect_command *command)
{
struct hid_device *hid = input_get_drvdata(dev);
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
- __s32 *value = report->field[0]->value;
- int x;
-
-#define CLAMP(x) do { if (x < 0) x = 0; else if (x > 0xff) x = 0xff; } while (0)
-
- switch (effect->type) {
- case FF_CONSTANT:
- x = effect->u.ramp.start_level + 0x80; /* 0x80 is no force */
- CLAMP(x);
-
- if (x == 0x80) {
- /* De-activate force in slot-1*/
- value[0] = 0x13;
- value[1] = 0x00;
- value[2] = 0x00;
- value[3] = 0x00;
- value[4] = 0x00;
- value[5] = 0x00;
- value[6] = 0x00;
-
- hid_hw_request(hid, report, HID_REQ_SET_REPORT);
- return 0;
- }
-
- value[0] = 0x11; /* Slot 1 */
- value[1] = 0x08;
- value[2] = x;
- value[3] = 0x80;
- value[4] = 0x00;
- value[5] = 0x00;
- value[6] = 0x00;
- hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ switch (command->cmd) {
+ case MLNX_START_COMBINED:
+ return hid_lg4ff_start_combined(hid, report, &command->u.simple_force);
+ break;
+ case MLNX_STOP_COMBINED:
+ return hid_lg4ff_stop_combined(hid, report);
break;
+ default:
+ dbg_hid("Unsupported effect command");
+ return -EINVAL;
}
- return 0;
}
/* Sends default autocentering command compatible with
@@ -608,7 +624,7 @@ int lg4ff_init(struct hid_device *hid)
for (j = 0; lg4ff_devices[i].ff_effects[j] >= 0; j++)
set_bit(lg4ff_devices[i].ff_effects[j], dev->ffbit);
- error = input_ff_create_memless(dev, NULL, hid_lg4ff_play);
+ error = input_ff_create_mlnx(dev, (void *)NULL, hid_lg4ff_control, FF_UPDATE_RATE);
if (error)
return error;
--
1.9.0
next prev parent reply other threads:[~2014-02-23 23:32 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-23 23:24 [PATCH v2 0/4] Add ff-memless-next and make hid-lg4ff use it Michal Malý
2014-02-23 23:24 ` Michal Malý
2014-02-23 23:29 ` [PATCH v2 1/4] Add ff-memless-next driver Michal Malý
2014-02-23 23:29 ` Michal Malý
2014-02-24 0:32 ` Anssi Hannula
2014-02-24 0:32 ` Anssi Hannula
2014-02-24 1:18 ` Michal Malý
2014-02-24 1:54 ` Michal Malý
2014-02-24 2:11 ` Anssi Hannula
2014-02-24 2:11 ` Anssi Hannula
2014-02-24 2:45 ` Michal Malý
2014-02-24 2:45 ` Michal Malý
2014-02-23 23:32 ` Michal Malý [this message]
2014-02-23 23:32 ` [PATCH v2 2/4] Port hid-lg4ff to ff-memless-next Michal Malý
2014-02-23 23:34 ` [PATCH v2 3/4] hid-lg4ff: Add support for periodic effects Michal Malý
2014-02-23 23:34 ` Michal Malý
2014-02-23 23:36 ` [PATCH v2 4/4] hid-lg4ff: Add support for ramp effect Michal Malý
2014-02-23 23:36 ` Michal Malý
2014-02-24 0:32 ` [PATCH v2 0/4] Add ff-memless-next and make hid-lg4ff use it Anssi Hannula
2014-02-24 0:32 ` Anssi Hannula
2014-02-24 0:58 ` Michal Malý
2014-02-24 0:58 ` Michal Malý
2014-02-24 21:17 ` Elias Vanderstuyft
2014-02-24 21:48 ` Dmitry Torokhov
2014-02-24 22:11 ` Michal Malý
2014-02-24 22:11 ` Michal Malý
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1646498.7GVfWfMn8D@geidi-prime \
--to=madcatxster@prifuk.cz \
--cc=anssi.hannula@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=elias.vds@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=simon@mungewell.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.