patch "iio: imu: inv_icm42600: Fix I2C init possible nack" added to char-misc-linus

patch "iio: imu: inv_icm42600: Fix I2C init possible nack" added to char-misc-linus

[gregkh]

This is a note to let you know that I've just added the patch titled

    iio: imu: inv_icm42600: Fix I2C init possible nack

to my char-misc git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
in the char-misc-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From b5d6ba09b10d2ccb865ed9bc45941db0a41c6756 Mon Sep 17 00:00:00 2001
From: Fawzi Khaber <fawzi.khaber@tdk.com>
Date: Mon, 11 Apr 2022 13:15:33 +0200
Subject: iio: imu: inv_icm42600: Fix I2C init possible nack

This register write to REG_INTF_CONFIG6 enables a spike filter that
is impacting the line and can prevent the I2C ACK to be seen by the
controller. So we don't test the return value.

Fixes: 7297ef1e261672b8 ("iio: imu: inv_icm42600: add I2C driver")
Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220411111533.5826-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
index 33d9afb1ba91..d4a692b838d0 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
@@ -18,12 +18,15 @@ static int inv_icm42600_i2c_bus_setup(struct inv_icm42600_state *st)
 	unsigned int mask, val;
 	int ret;
 
-	/* setup interface registers */
-	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
-				 INV_ICM42600_INTF_CONFIG6_MASK,
-				 INV_ICM42600_INTF_CONFIG6_I3C_EN);
-	if (ret)
-		return ret;
+	/*
+	 * setup interface registers
+	 * This register write to REG_INTF_CONFIG6 enables a spike filter that
+	 * is impacting the line and can prevent the I2C ACK to be seen by the
+	 * controller. So we don't test the return value.
+	 */
+	regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
+			   INV_ICM42600_INTF_CONFIG6_MASK,
+			   INV_ICM42600_INTF_CONFIG6_I3C_EN);
 
 	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4,
 				 INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0);
-- 
2.36.0