* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range [not found] <158709369.126474.1369301672221.JavaMail.root@gnuside.com> @ 2013-05-23 9:52 ` Jérôme Arzel 2013-05-24 20:13 ` Scott Wood 2013-05-31 18:20 ` Scott Wood 0 siblings, 2 replies; 6+ messages in thread From: Jérôme Arzel @ 2013-05-23 9:52 UTC (permalink / raw) To: u-boot Hi all, I have an issue when I compile U-Boot for my target machine (P1022DS, 36-bit). Here is the error message: release.S: Assembler messages: release.S:154: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff) release.S:286: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff) release.S:311: Error: operand out of range (0xfffff140 is not between 0x00000000 and 0x0000ffff) (release.S is located to arch/powerpc/cpu/mpc85xx/release.S) And here is the code for the first error (line 150): #define toreset(x) (x - __secondary_start_page + 0xfffff000) /* get our PIR to figure out our table entry */ lis r3,toreset(__spin_table_addr)@h ori r3,r3,toreset(__spin_table_addr)@l I don't really know why it doesn't work, but I think that "ori" is inappropried, the immediate value must be a 16-bit value. I use GCC 4.7.3, compiled in x86_64 for target powerpc-none-linux-gnuspe. My U-Boot come from the repository, but older versions fail too. Thanks for your help, J?r?me ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range 2013-05-23 9:52 ` [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel @ 2013-05-24 20:13 ` Scott Wood 2013-05-27 9:25 ` Jérôme Arzel 2013-05-31 18:20 ` Scott Wood 1 sibling, 1 reply; 6+ messages in thread From: Scott Wood @ 2013-05-24 20:13 UTC (permalink / raw) To: u-boot On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote: > Hi all, > > I have an issue when I compile U-Boot for my target machine (P1022DS, > 36-bit). > Here is the error message: > > release.S: Assembler messages: > release.S:154: Error: operand out of range (0xfffff144 is not between > 0x00000000 and 0x0000ffff) > release.S:286: Error: operand out of range (0xfffff144 is not between > 0x00000000 and 0x0000ffff) > release.S:311: Error: operand out of range (0xfffff140 is not between > 0x00000000 and 0x0000ffff) > > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S) > > And here is the code for the first error (line 150): > > #define toreset(x) (x - __secondary_start_page + 0xfffff000) > > /* get our PIR to figure out our table entry */ > lis r3,toreset(__spin_table_addr)@h > ori r3,r3,toreset(__spin_table_addr)@l > > I don't really know why it doesn't work, but I think > that "ori" is inappropried, the immediate value must be a 16-bit > value. The @l means take the low 16 bits of the constant. Likewise, the @h in the lis takes the upper 16 bits. Could you try to see what that instruction looks like after the preprocessor stage (i.e. use -E rather than -c in gcc)? > I use GCC 4.7.3, compiled in x86_64 for target > powerpc-none-linux-gnuspe. > My U-Boot come from the repository, but older versions fail too. It builds OK for me with GCC 4.7.2. -Scott ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range 2013-05-24 20:13 ` Scott Wood @ 2013-05-27 9:25 ` Jérôme Arzel 2013-05-28 15:14 ` Jérôme Arzel 0 siblings, 1 reply; 6+ messages in thread From: Jérôme Arzel @ 2013-05-27 9:25 UTC (permalink / raw) To: u-boot On 05/24/2013 10:13:55 PM, Scott Wood wrote: > > On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote: > > Hi all, > > > > I have an issue when I compile U-Boot for my target machine > > (P1022DS, > > 36-bit). > > Here is the error message: > > > > release.S: Assembler messages: > > release.S:154: Error: operand out of range (0xfffff144 is not > > between > > 0x00000000 and 0x0000ffff) > > release.S:286: Error: operand out of range (0xfffff144 is not > > between > > 0x00000000 and 0x0000ffff) > > release.S:311: Error: operand out of range (0xfffff140 is not > > between > > 0x00000000 and 0x0000ffff) > > > > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S) > > > > And here is the code for the first error (line 150): > > > > #define toreset(x) (x - __secondary_start_page + 0xfffff000) > > > > /* get our PIR to figure out our table entry */ > > lis r3,toreset(__spin_table_addr)@h > > ori r3,r3,toreset(__spin_table_addr)@l > > > > I don't really know why it doesn't work, but I think > > that "ori" is inappropried, the immediate value must be a 16-bit > > value. > > The @l means take the low 16 bits of the constant. Likewise, the @h > in > the lis takes the upper 16 bits. > > Could you try to see what that instruction looks like after the > preprocessor stage (i.e. use -E rather than -c in gcc)? > OK, I tried and unsurprisingly it's: lis 3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@h ori 3,3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@l lwz 3,0(3) If the @l takes the low 16 bits of (__spin_table_addr - __secondary_start_page + 0xfffff000), so the immediate value should not be 0xfffff144, but 0xf144. The error is maybe in GCC... J?r?me ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range 2013-05-27 9:25 ` Jérôme Arzel @ 2013-05-28 15:14 ` Jérôme Arzel 0 siblings, 0 replies; 6+ messages in thread From: Jérôme Arzel @ 2013-05-28 15:14 UTC (permalink / raw) To: u-boot On 05/27/2013 11:25:17 AM, J?r?me Arzel wrote: > > On 05/24/2013 10:13:55 PM, Scott Wood wrote: > > > > On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote: > > > Hi all, > > > > > > I have an issue when I compile U-Boot for my target machine > > > (P1022DS, > > > 36-bit). > > > Here is the error message: > > > > > > release.S: Assembler messages: > > > release.S:154: Error: operand out of range (0xfffff144 is not > > > between > > > 0x00000000 and 0x0000ffff) > > > release.S:286: Error: operand out of range (0xfffff144 is not > > > between > > > 0x00000000 and 0x0000ffff) > > > release.S:311: Error: operand out of range (0xfffff140 is not > > > between > > > 0x00000000 and 0x0000ffff) > > > > > > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S) > > > > > > And here is the code for the first error (line 150): > > > > > > #define toreset(x) (x - __secondary_start_page + 0xfffff000) > > > > > > /* get our PIR to figure out our table entry */ > > > lis r3,toreset(__spin_table_addr)@h > > > ori r3,r3,toreset(__spin_table_addr)@l > > > > > > I don't really know why it doesn't work, but I think > > > that "ori" is inappropried, the immediate value must be a 16-bit > > > value. > > > > The @l means take the low 16 bits of the constant. Likewise, the > > @h > > in > > the lis takes the upper 16 bits. > > > > Could you try to see what that instruction looks like after the > > preprocessor stage (i.e. use -E rather than -c in gcc)? > > > > OK, I tried and unsurprisingly it's: > > lis 3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@h > ori 3,3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@l > lwz 3,0(3) > > If the @l takes the low 16 bits of > (__spin_table_addr - __secondary_start_page + 0xfffff000), so > the immediate value should not be 0xfffff144, but 0xf144. > The error is maybe in GCC... > > > J?r?me In fact my tests was in a virtual machine. I restarted the compilation of GCC from scratch, directly on my machine (x86_64) and the result is slightly different, but almost the same: powerpc-e500v2-linux-gnuspe-gcc -D__ASSEMBLY__ -g -Os \ -fpic -mrelocatable -ffunction-sections -fdata-sections \ -meabi -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x11000000 \ -I/home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/include2 \ -I/home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/include \ -I/home/arzel/u-boot/u-boot-git/include -fno-builtin \ -ffreestanding -nostdinc \ -isystem /home/arzel/cross_compile/tools/lib/gcc/powerpc- e500v2-linux-gnuspe/4.8.0/include \ -pipe -DCONFIG_PPC -D__powerpc__ -ffixed-r2 -Wa,-me500 \ -msoft-float -mno-string -mspe=yes -mno-spe \ -o /home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/ arch/powerpc/cpu/mpc85xx/release.o release.S -c release.S: Assembler messages: release.S:153: Error: value of 4294963524 too large for field of 2 bytes at 170 release.S:154: Error: operand out of range (0xfffffffffffff144 is not between 0x0000000000000000 and 0x000000000000ffff) release.S:154: Error: value of 4294963524 too large for field of 2 bytes at 174 release.S:282: Error: value of 4294963524 too large for field of 2 bytes at 206 release.S:283: Error: operand out of range (0xfffffffffffff144 is not between 0x0000000000000000 and 0x000000000000ffff) release.S:283: Error: value of 4294963524 too large for field of 2 bytes at 210 release.S:307: Error: value of 4294963520 too large for field of 2 bytes at 278 release.S:308: Error: operand out of range (0xfffffffffffff140 is not between 0x0000000000000000 and 0x000000000000ffff) release.S:308: Error: value of 4294963520 too large for field of 2 bytes at 282 By curiosity, I tried to replace "toreset(__spin_table_addr)" by "0xfffffffffffff144" and it works... but it's not a solution. I use the last version of U-Boot from the git branch 'master'. Here is my configuration for GCC: export PATH=/home/arzel/cross_compile/tools/bin:$PATH Binutils (v2.23.2) configure --target=powerpc-e500v2-linux-gnuspe \ --prefix=/home/arzel/cross_compile/tools \ --with-sysroot=/home/home/arzel/cross_compile/sysroot \ --disable-nls --disable-multilib make all make install GCC (v4.8.0) configure --target=powerpc-e500v2-linux-gnuspe \ --prefix=/home/arzel/cross_compile/tools \ --with-sysroot=/home/arzel/cross_compile/sysroot \ --without-headers --with-newlib --disable-shared \ --disable-threads --enable-languages=c \ --disable-decimal-float --disable-__cxa_atexit \ --disable-libquadmath --disable-libssp \ --disable-libgomp --disable-libmudflap \ --disable-nls --disable-multilib \ --enable-e500_double --with-long-double-128 \ --with-cpu=8548 make all-host all-target-libgcc make install-host install-target-libgcc Normally, I can build U-Boot with this small GCC. J?r?me ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range 2013-05-23 9:52 ` [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel 2013-05-24 20:13 ` Scott Wood @ 2013-05-31 18:20 ` Scott Wood 2013-06-04 9:08 ` Jérôme Arzel 1 sibling, 1 reply; 6+ messages in thread From: Scott Wood @ 2013-05-31 18:20 UTC (permalink / raw) To: u-boot On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote: > Hi all, > > I have an issue when I compile U-Boot for my target machine (P1022DS, > 36-bit). > Here is the error message: > > release.S: Assembler messages: > release.S:154: Error: operand out of range (0xfffff144 is not between > 0x00000000 and 0x0000ffff) > release.S:286: Error: operand out of range (0xfffff144 is not between > 0x00000000 and 0x0000ffff) > release.S:311: Error: operand out of range (0xfffff140 is not between > 0x00000000 and 0x0000ffff) > > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S) > > And here is the code for the first error (line 150): > > #define toreset(x) (x - __secondary_start_page + 0xfffff000) > > /* get our PIR to figure out our table entry */ > lis r3,toreset(__spin_table_addr)@h > ori r3,r3,toreset(__spin_table_addr)@l > > I don't really know why it doesn't work, but I think > that "ori" is inappropried, the immediate value must be a 16-bit > value. > > I use GCC 4.7.3, compiled in x86_64 for target > powerpc-none-linux-gnuspe. > My U-Boot come from the repository, but older versions fail too. This appears to be a binutils bug, introduced in 2.23.2. The attached test program gives a similar error on 2.23.2, but 2.23.1 is OK. I've filed it here: http://sourceware.org/bugzilla/show_bug.cgi?id=15557 -Scott -------------- next part -------------- ori 3,3,(y-x+0x8000)@l x: y: ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range 2013-05-31 18:20 ` Scott Wood @ 2013-06-04 9:08 ` Jérôme Arzel 0 siblings, 0 replies; 6+ messages in thread From: Jérôme Arzel @ 2013-06-04 9:08 UTC (permalink / raw) To: u-boot Binutils 2.23.1 and the patch(es) for 2.23.2 work well. Thank you for your help. J?r?me On 05/31/2013 08:20:00 PM, Scott Wood wrote: > > On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote: > > Hi all, > > > > I have an issue when I compile U-Boot for my target machine > > (P1022DS, > > 36-bit). > > Here is the error message: > > > > release.S: Assembler messages: > > release.S:154: Error: operand out of range (0xfffff144 is not > > between > > 0x00000000 and 0x0000ffff) > > release.S:286: Error: operand out of range (0xfffff144 is not > > between > > 0x00000000 and 0x0000ffff) > > release.S:311: Error: operand out of range (0xfffff140 is not > > between > > 0x00000000 and 0x0000ffff) > > > > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S) > > > > And here is the code for the first error (line 150): > > > > #define toreset(x) (x - __secondary_start_page + 0xfffff000) > > > > /* get our PIR to figure out our table entry */ > > lis r3,toreset(__spin_table_addr)@h > > ori r3,r3,toreset(__spin_table_addr)@l > > > > I don't really know why it doesn't work, but I think > > that "ori" is inappropried, the immediate value must be a 16-bit > > value. > > > > I use GCC 4.7.3, compiled in x86_64 for target > > powerpc-none-linux-gnuspe. > > My U-Boot come from the repository, but older versions fail too. > > This appears to be a binutils bug, introduced in 2.23.2. The > attached > test program gives a similar error on 2.23.2, but 2.23.1 is OK. > > I've filed it here: > http://sourceware.org/bugzilla/show_bug.cgi?id=15557 > > -Scott ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-06-04 9:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <158709369.126474.1369301672221.JavaMail.root@gnuside.com>
2013-05-23 9:52 ` [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel
2013-05-24 20:13 ` Scott Wood
2013-05-27 9:25 ` Jérôme Arzel
2013-05-28 15:14 ` Jérôme Arzel
2013-05-31 18:20 ` Scott Wood
2013-06-04 9:08 ` Jérôme Arzel
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.