All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@iki.fi>
Cc: linux-media@vger.kernel.org, linux-omap@vger.kernel.org,
	tony@atomide.com, khilman@deeprootsystems.com
Subject: Re: [PATCH v5.1 1/3] omap3isp: Add CSI configuration registers from control block to ISP resources
Date: Sat, 20 Oct 2012 19:38:20 +0200	[thread overview]
Message-ID: <1666252.QZ7XShmJg3@avalon> (raw)
In-Reply-To: <1350742277-24528-1-git-send-email-sakari.ailus@iki.fi>

Hi Sakari,

On Saturday 20 October 2012 17:11:17 Sakari Ailus wrote:
> Add the registers used to configure the CSI-2 receiver PHY on OMAP3430 and
> 3630 and map them in the ISP driver. The register is part of the control
> block but it only is needed by the ISP driver.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> Acked-by: Tony Lindgren <tony@atomide.com>
> ---
> Hi Laurent,
> 
> Could you replace the patch I sent you with this one? I think there's a tiny
> conflict there since the interrupt number definition suddenly changed.

I had already resolved the conflict when applying to my tree 
(http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp-
omap3isp-next).

>  arch/arm/mach-omap2/devices.c         |   10 ++++++++++
>  drivers/media/platform/omap3isp/isp.c |    6 ++++--
>  drivers/media/platform/omap3isp/isp.h |    2 ++
>  3 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
> index c8c2117..5f1ee96 100644
> --- a/arch/arm/mach-omap2/devices.c
> +++ b/arch/arm/mach-omap2/devices.c
> @@ -200,6 +200,16 @@ static struct resource omap3isp_resources[] = {
>  		.flags		= IORESOURCE_MEM,
>  	},
>  	{
> +		.start		= OMAP343X_CTRL_BASE + OMAP343X_CONTROL_CSIRXFE,
> +		.end		= OMAP343X_CTRL_BASE + OMAP343X_CONTROL_CSIRXFE + 3,
> +		.flags		= IORESOURCE_MEM,
> +	},
> +	{
> +		.start		= OMAP343X_CTRL_BASE + OMAP3630_CONTROL_CAMERA_PHY_CTRL,
> +		.end		= OMAP343X_CTRL_BASE + OMAP3630_CONTROL_CAMERA_PHY_CTRL + 3,
> +		.flags		= IORESOURCE_MEM,
> +	},
> +	{
>  		.start		= 24 + OMAP_INTC_START,
>  		.flags		= IORESOURCE_IRQ,
>  	}
> diff --git a/drivers/media/platform/omap3isp/isp.c
> b/drivers/media/platform/omap3isp/isp.c index 99640d8..5ea5520 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -102,7 +102,8 @@ static const struct isp_res_mapping isp_res_maps[] = {
>  		       1 << OMAP3_ISP_IOMEM_RESZ |
>  		       1 << OMAP3_ISP_IOMEM_SBL |
>  		       1 << OMAP3_ISP_IOMEM_CSI2A_REGS1 |
> -		       1 << OMAP3_ISP_IOMEM_CSIPHY2,
> +		       1 << OMAP3_ISP_IOMEM_CSIPHY2 |
> +		       1 << OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE,
>  	},
>  	{
>  		.isp_rev = ISP_REVISION_15_0,
> @@ -119,7 +120,8 @@ static const struct isp_res_mapping isp_res_maps[] = {
>  		       1 << OMAP3_ISP_IOMEM_CSI2A_REGS2 |
>  		       1 << OMAP3_ISP_IOMEM_CSI2C_REGS1 |
>  		       1 << OMAP3_ISP_IOMEM_CSIPHY1 |
> -		       1 << OMAP3_ISP_IOMEM_CSI2C_REGS2,
> +		       1 << OMAP3_ISP_IOMEM_CSI2C_REGS2 |
> +		       1 << OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL,
>  	},
>  };
> 
> diff --git a/drivers/media/platform/omap3isp/isp.h
> b/drivers/media/platform/omap3isp/isp.h index 8be7487..6fed222 100644
> --- a/drivers/media/platform/omap3isp/isp.h
> +++ b/drivers/media/platform/omap3isp/isp.h
> @@ -72,6 +72,8 @@ enum isp_mem_resources {
>  	OMAP3_ISP_IOMEM_CSI2C_REGS1,
>  	OMAP3_ISP_IOMEM_CSIPHY1,
>  	OMAP3_ISP_IOMEM_CSI2C_REGS2,
> +	OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE,
> +	OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL,
>  	OMAP3_ISP_IOMEM_LAST
>  };

-- 
Regards,

Laurent Pinchart


      reply	other threads:[~2012-10-20 17:37 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-14 10:31 [PATCH v5 0/3] OMAP 3 CSI-2 configuration Sakari Ailus
2012-10-14 10:31 ` [PATCH v5 1/3] omap3isp: Add CSI configuration registers from control block to ISP resources Sakari Ailus
2012-10-14 10:31 ` [PATCH v5 2/3] omap3isp: Add PHY routing configuration Sakari Ailus
2012-10-14 10:31 ` [PATCH v5 3/3] omap3isp: Configure CSI-2 phy based on platform data Sakari Ailus
2012-10-16 14:51 ` [PATCH v5 0/3] OMAP 3 CSI-2 configuration Laurent Pinchart
2012-10-18 13:45   ` Laurent Pinchart
2012-10-18 15:39     ` Tony Lindgren
2012-10-20 14:11   ` [PATCH v5.1 1/3] omap3isp: Add CSI configuration registers from control block to ISP resources Sakari Ailus
2012-10-20 17:38     ` Laurent Pinchart [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1666252.QZ7XShmJg3@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=sakari.ailus@iki.fi \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.