* [PATCH v2 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb @ 2017-06-02 7:04 ` William Wu 0 siblings, 0 replies; 11+ messages in thread From: William Wu @ 2017-06-02 7:04 UTC (permalink / raw) To: heiko-4mtYJXux2i+zQB+pC5nmwQ Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, frank.wang-TNX95d0MmH7DzftRWevZcw, huangtao-TNX95d0MmH7DzftRWevZcw, daniel.meng-TNX95d0MmH7DzftRWevZcw, william.wu-TNX95d0MmH7DzftRWevZcw This series adds support for usb on rk322x SoCs. William Wu (2): ARM: dts: rockchip: add usb nodes on rk322x ARM: dts: rockchip: enable usb for rk3229 evb board Tested on rk3229 evb board, and depended on the following patches and config. [1] https://patchwork.kernel.org/patch/9761507/ [2] https://patchwork.kernel.org/patch/9761511/ [3] https://patchwork.kernel.org/patch/9761515/ [4] https://patchwork.kernel.org/patch/9761519/ [5] enable CONFIG_PHY_ROCKCHIP_INNO_USB2 arch/arm/boot/dts/rk3229-evb.dts | 74 +++++++++++++++++++++ arch/arm/boot/dts/rk322x.dtsi | 138 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 211 insertions(+), 1 deletion(-) -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb @ 2017-06-02 7:04 ` William Wu 0 siblings, 0 replies; 11+ messages in thread From: William Wu @ 2017-06-02 7:04 UTC (permalink / raw) To: heiko Cc: robh+dt, mark.rutland, linux, linux-arm-kernel, devicetree, linux-kernel, linux-rockchip, frank.wang, huangtao, daniel.meng, william.wu This series adds support for usb on rk322x SoCs. William Wu (2): ARM: dts: rockchip: add usb nodes on rk322x ARM: dts: rockchip: enable usb for rk3229 evb board Tested on rk3229 evb board, and depended on the following patches and config. [1] https://patchwork.kernel.org/patch/9761507/ [2] https://patchwork.kernel.org/patch/9761511/ [3] https://patchwork.kernel.org/patch/9761515/ [4] https://patchwork.kernel.org/patch/9761519/ [5] enable CONFIG_PHY_ROCKCHIP_INNO_USB2 arch/arm/boot/dts/rk3229-evb.dts | 74 +++++++++++++++++++++ arch/arm/boot/dts/rk322x.dtsi | 138 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 211 insertions(+), 1 deletion(-) -- 2.0.0 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb @ 2017-06-02 7:04 ` William Wu 0 siblings, 0 replies; 11+ messages in thread From: William Wu @ 2017-06-02 7:04 UTC (permalink / raw) To: linux-arm-kernel This series adds support for usb on rk322x SoCs. William Wu (2): ARM: dts: rockchip: add usb nodes on rk322x ARM: dts: rockchip: enable usb for rk3229 evb board Tested on rk3229 evb board, and depended on the following patches and config. [1] https://patchwork.kernel.org/patch/9761507/ [2] https://patchwork.kernel.org/patch/9761511/ [3] https://patchwork.kernel.org/patch/9761515/ [4] https://patchwork.kernel.org/patch/9761519/ [5] enable CONFIG_PHY_ROCKCHIP_INNO_USB2 arch/arm/boot/dts/rk3229-evb.dts | 74 +++++++++++++++++++++ arch/arm/boot/dts/rk322x.dtsi | 138 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 211 insertions(+), 1 deletion(-) -- 2.0.0 ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <1496387065-21073-1-git-send-email-william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>]
* [PATCH v2 1/2] ARM: dts: rockchip: add usb nodes on rk322x 2017-06-02 7:04 ` William Wu (?) @ 2017-06-02 7:04 ` William Wu -1 siblings, 0 replies; 11+ messages in thread From: William Wu @ 2017-06-02 7:04 UTC (permalink / raw) To: heiko-4mtYJXux2i+zQB+pC5nmwQ Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, frank.wang-TNX95d0MmH7DzftRWevZcw, huangtao-TNX95d0MmH7DzftRWevZcw, daniel.meng-TNX95d0MmH7DzftRWevZcw, william.wu-TNX95d0MmH7DzftRWevZcw This patch adds usb otg/host controllers and phys nodes on rk322x. Signed-off-by: William Wu <william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org> --- arch/arm/boot/dts/rk322x.dtsi | 138 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 137 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index df57413..1e0ee4a 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -210,8 +210,61 @@ }; grf: syscon@11000000 { - compatible = "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x11000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2-phy@760 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0760 0x0c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usb480m_phy0"; + status = "disabled"; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; + + u2phy1: usb2-phy@800 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0800 0x0c>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usb480m_phy1"; + status = "disabled"; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy1_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; }; uart0: serial@11010000 { @@ -467,6 +520,89 @@ status = "disabled"; }; + usb_otg: usb@30040000 { + compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x30040000 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb_host0_ehci: usb@30080000 { + compatible = "generic-ehci"; + reg = <0x30080000 0x20000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host0_ohci: usb@300a0000 { + compatible = "generic-ohci"; + reg = <0x300a0000 0x20000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ehci: usb@300c0000 { + compatible = "generic-ehci"; + reg = <0x300c0000 0x20000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ohci: usb@300e0000 { + compatible = "generic-ohci"; + reg = <0x300e0000 0x20000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host2_ehci: usb@30100000 { + compatible = "generic-ehci"; + reg = <0x30100000 0x20000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + phys = <&u2phy1_host>; + phy-names = "usb"; + clock-names = "usbhost", "utmi"; + status = "disabled"; + }; + + usb_host2_ohci: usb@30120000 { + compatible = "generic-ohci"; + reg = <0x30120000 0x20000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + gmac: ethernet@30200000 { compatible = "rockchip,rk3228-gmac"; reg = <0x30200000 0x10000>; -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 1/2] ARM: dts: rockchip: add usb nodes on rk322x @ 2017-06-02 7:04 ` William Wu 0 siblings, 0 replies; 11+ messages in thread From: William Wu @ 2017-06-02 7:04 UTC (permalink / raw) To: heiko Cc: robh+dt, mark.rutland, linux, linux-arm-kernel, devicetree, linux-kernel, linux-rockchip, frank.wang, huangtao, daniel.meng, william.wu This patch adds usb otg/host controllers and phys nodes on rk322x. Signed-off-by: William Wu <william.wu@rock-chips.com> --- arch/arm/boot/dts/rk322x.dtsi | 138 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 137 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index df57413..1e0ee4a 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -210,8 +210,61 @@ }; grf: syscon@11000000 { - compatible = "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x11000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2-phy@760 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0760 0x0c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usb480m_phy0"; + status = "disabled"; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; + + u2phy1: usb2-phy@800 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0800 0x0c>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usb480m_phy1"; + status = "disabled"; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy1_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; }; uart0: serial@11010000 { @@ -467,6 +520,89 @@ status = "disabled"; }; + usb_otg: usb@30040000 { + compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x30040000 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb_host0_ehci: usb@30080000 { + compatible = "generic-ehci"; + reg = <0x30080000 0x20000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host0_ohci: usb@300a0000 { + compatible = "generic-ohci"; + reg = <0x300a0000 0x20000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ehci: usb@300c0000 { + compatible = "generic-ehci"; + reg = <0x300c0000 0x20000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ohci: usb@300e0000 { + compatible = "generic-ohci"; + reg = <0x300e0000 0x20000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host2_ehci: usb@30100000 { + compatible = "generic-ehci"; + reg = <0x30100000 0x20000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + phys = <&u2phy1_host>; + phy-names = "usb"; + clock-names = "usbhost", "utmi"; + status = "disabled"; + }; + + usb_host2_ohci: usb@30120000 { + compatible = "generic-ohci"; + reg = <0x30120000 0x20000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + gmac: ethernet@30200000 { compatible = "rockchip,rk3228-gmac"; reg = <0x30200000 0x10000>; -- 2.0.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 1/2] ARM: dts: rockchip: add usb nodes on rk322x @ 2017-06-02 7:04 ` William Wu 0 siblings, 0 replies; 11+ messages in thread From: William Wu @ 2017-06-02 7:04 UTC (permalink / raw) To: linux-arm-kernel This patch adds usb otg/host controllers and phys nodes on rk322x. Signed-off-by: William Wu <william.wu@rock-chips.com> --- arch/arm/boot/dts/rk322x.dtsi | 138 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 137 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index df57413..1e0ee4a 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -210,8 +210,61 @@ }; grf: syscon at 11000000 { - compatible = "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x11000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2-phy at 760 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0760 0x0c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usb480m_phy0"; + status = "disabled"; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; + + u2phy1: usb2-phy at 800 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0800 0x0c>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usb480m_phy1"; + status = "disabled"; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy1_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; }; uart0: serial at 11010000 { @@ -467,6 +520,89 @@ status = "disabled"; }; + usb_otg: usb at 30040000 { + compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x30040000 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb_host0_ehci: usb at 30080000 { + compatible = "generic-ehci"; + reg = <0x30080000 0x20000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host0_ohci: usb at 300a0000 { + compatible = "generic-ohci"; + reg = <0x300a0000 0x20000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ehci: usb at 300c0000 { + compatible = "generic-ehci"; + reg = <0x300c0000 0x20000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ohci: usb at 300e0000 { + compatible = "generic-ohci"; + reg = <0x300e0000 0x20000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host2_ehci: usb at 30100000 { + compatible = "generic-ehci"; + reg = <0x30100000 0x20000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + phys = <&u2phy1_host>; + phy-names = "usb"; + clock-names = "usbhost", "utmi"; + status = "disabled"; + }; + + usb_host2_ohci: usb at 30120000 { + compatible = "generic-ohci"; + reg = <0x30120000 0x20000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + gmac: ethernet at 30200000 { compatible = "rockchip,rk3228-gmac"; reg = <0x30200000 0x10000>; -- 2.0.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb 2017-06-02 7:04 ` William Wu (?) @ 2017-06-02 12:14 ` Heiko Stuebner -1 siblings, 0 replies; 11+ messages in thread From: Heiko Stuebner @ 2017-06-02 12:14 UTC (permalink / raw) To: William Wu Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, frank.wang-TNX95d0MmH7DzftRWevZcw, huangtao-TNX95d0MmH7DzftRWevZcw, daniel.meng-TNX95d0MmH7DzftRWevZcw Am Freitag, 2. Juni 2017, 15:04:23 CEST schrieb William Wu: > This series adds support for usb on rk322x SoCs. > > William Wu (2): > ARM: dts: rockchip: add usb nodes on rk322x > ARM: dts: rockchip: enable usb for rk3229 evb board > > Tested on rk3229 evb board, and depended on the following > patches and config. applied both for 4.13 (with some minor reordering in patch1) Thanks Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb @ 2017-06-02 12:14 ` Heiko Stuebner 0 siblings, 0 replies; 11+ messages in thread From: Heiko Stuebner @ 2017-06-02 12:14 UTC (permalink / raw) To: William Wu Cc: robh+dt, mark.rutland, linux, linux-arm-kernel, devicetree, linux-kernel, linux-rockchip, frank.wang, huangtao, daniel.meng Am Freitag, 2. Juni 2017, 15:04:23 CEST schrieb William Wu: > This series adds support for usb on rk322x SoCs. > > William Wu (2): > ARM: dts: rockchip: add usb nodes on rk322x > ARM: dts: rockchip: enable usb for rk3229 evb board > > Tested on rk3229 evb board, and depended on the following > patches and config. applied both for 4.13 (with some minor reordering in patch1) Thanks Heiko ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb @ 2017-06-02 12:14 ` Heiko Stuebner 0 siblings, 0 replies; 11+ messages in thread From: Heiko Stuebner @ 2017-06-02 12:14 UTC (permalink / raw) To: linux-arm-kernel Am Freitag, 2. Juni 2017, 15:04:23 CEST schrieb William Wu: > This series adds support for usb on rk322x SoCs. > > William Wu (2): > ARM: dts: rockchip: add usb nodes on rk322x > ARM: dts: rockchip: enable usb for rk3229 evb board > > Tested on rk3229 evb board, and depended on the following > patches and config. applied both for 4.13 (with some minor reordering in patch1) Thanks Heiko ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/2] ARM: dts: rockchip: enable usb for rk3229 evb board 2017-06-02 7:04 ` William Wu @ 2017-06-02 7:04 ` William Wu -1 siblings, 0 replies; 11+ messages in thread From: William Wu @ 2017-06-02 7:04 UTC (permalink / raw) To: heiko Cc: robh+dt, mark.rutland, linux, linux-arm-kernel, devicetree, linux-kernel, linux-rockchip, frank.wang, huangtao, daniel.meng, william.wu Rockchip's rk3229 evaluation board has one usb otg controller and three usb host controllers. Each usb controller connect with one usb2 phy port through UTMI+ interface. And the three usb host interfaces use the same GPIO VBUS drive. Let's enable them to support usb on rk3229 evb board. Signed-off-by: William Wu <william.wu@rock-chips.com> --- arch/arm/boot/dts/rk3229-evb.dts | 74 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 275092a..1b55192 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -58,6 +58,17 @@ #clock-cells = <0>; }; + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + }; + vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -85,6 +96,69 @@ status = "okay"; }; +&pinctrl { + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + &uart2 { status = "okay"; }; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_ehci { + status = "okay"; +}; + +&usb_host2_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; -- 2.0.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 2/2] ARM: dts: rockchip: enable usb for rk3229 evb board @ 2017-06-02 7:04 ` William Wu 0 siblings, 0 replies; 11+ messages in thread From: William Wu @ 2017-06-02 7:04 UTC (permalink / raw) To: linux-arm-kernel Rockchip's rk3229 evaluation board has one usb otg controller and three usb host controllers. Each usb controller connect with one usb2 phy port through UTMI+ interface. And the three usb host interfaces use the same GPIO VBUS drive. Let's enable them to support usb on rk3229 evb board. Signed-off-by: William Wu <william.wu@rock-chips.com> --- arch/arm/boot/dts/rk3229-evb.dts | 74 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 275092a..1b55192 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -58,6 +58,17 @@ #clock-cells = <0>; }; + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + }; + vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -85,6 +96,69 @@ status = "okay"; }; +&pinctrl { + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + &uart2 { status = "okay"; }; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_ehci { + status = "okay"; +}; + +&usb_host2_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; -- 2.0.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
end of thread, other threads:[~2017-06-02 12:14 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-06-02 7:04 [PATCH v2 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb William Wu
2017-06-02 7:04 ` William Wu
2017-06-02 7:04 ` William Wu
[not found] ` <1496387065-21073-1-git-send-email-william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-06-02 7:04 ` [PATCH v2 1/2] ARM: dts: rockchip: add usb nodes on rk322x William Wu
2017-06-02 7:04 ` William Wu
2017-06-02 7:04 ` William Wu
2017-06-02 12:14 ` [PATCH v2 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb Heiko Stuebner
2017-06-02 12:14 ` Heiko Stuebner
2017-06-02 12:14 ` Heiko Stuebner
2017-06-02 7:04 ` [PATCH v2 2/2] ARM: dts: rockchip: enable usb for rk3229 evb board William Wu
2017-06-02 7:04 ` William Wu
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.