[PATCH] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[PATCH] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[Yan Wang]

The system hang because of dsa_tag_8021q_port_setup()->
				stmmac_vlan_rx_add_vid().

I found in stmmac_drv_probe() that cailing pm_runtime_put()
disabled the clock.

First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
resume/suspend is active.

Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
registers after stmmac's clock is closed.

I would suggest adding the pm_runtime_resume_and_get() to the
stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
while in use.

Signed-off-by: Yan Wang <rk.code@outlook.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d7fcab057032..f9cd063f1fe3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6350,6 +6350,10 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 	bool is_double = false;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(priv->device);
+	if (ret < 0)
+		return ret;
+
 	if (be16_to_cpu(proto) == ETH_P_8021AD)
 		is_double = true;
 
@@ -6357,16 +6361,18 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 	ret = stmmac_vlan_update(priv, is_double);
 	if (ret) {
 		clear_bit(vid, priv->active_vlans);
-		return ret;
+		goto err_pm_put;
 	}
 
 	if (priv->hw->num_vlan) {
 		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
 		if (ret)
-			return ret;
+			goto err_pm_put;
 	}
+err_pm_put:
+	pm_runtime_put(priv->device);
 
-	return 0;
+	return ret;
 }
 
 static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[Yan Wang]

The system hang because of dsa_tag_8021q_port_setup()->
				stmmac_vlan_rx_add_vid().

I found in stmmac_drv_probe() that cailing pm_runtime_put()
disabled the clock.

First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
resume/suspend is active.

Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
registers after stmmac's clock is closed.

I would suggest adding the pm_runtime_resume_and_get() to the
stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
while in use.

Signed-off-by: Yan Wang <rk.code@outlook.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d7fcab057032..f9cd063f1fe3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6350,6 +6350,10 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 	bool is_double = false;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(priv->device);
+	if (ret < 0)
+		return ret;
+
 	if (be16_to_cpu(proto) == ETH_P_8021AD)
 		is_double = true;
 
@@ -6357,16 +6361,18 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 	ret = stmmac_vlan_update(priv, is_double);
 	if (ret) {
 		clear_bit(vid, priv->active_vlans);
-		return ret;
+		goto err_pm_put;
 	}
 
 	if (priv->hw->num_vlan) {
 		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
 		if (ret)
-			return ret;
+			goto err_pm_put;
 	}
+err_pm_put:
+	pm_runtime_put(priv->device);
 
-	return 0;
+	return ret;
 }
 
 static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
-- 
2.17.1

Re: [PATCH] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[Florian Fainelli]

On 4/13/2023 6:38 AM, Yan Wang wrote:
> The system hang because of dsa_tag_8021q_port_setup()->
> 				stmmac_vlan_rx_add_vid().
> 
> I found in stmmac_drv_probe() that cailing pm_runtime_put()
> disabled the clock.
> 
> First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
> resume/suspend is active.
> 
> Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
> will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
> The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
> registers after stmmac's clock is closed.
> 
> I would suggest adding the pm_runtime_resume_and_get() to the
> stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
> while in use.
> 
> Signed-off-by: Yan Wang <rk.code@outlook.com>

You have posted this patch several times now yet not on 
netdev@vger.kernel or towards the maintainers of the drivers, please 
consider using scripts/get_maintainer.pl.

While it looks like you are fixing a bug, it would be worthy of 
providing a suitable Fixes: tag since this is a genuine bugfix. You 
should also consider providing the target tree: 'net' for bug fixes and 
'net-next' for features, and also provide a version counter in the 
subject 'PATCH v4' or something like that.
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[Florian Fainelli]

On 4/13/2023 7:08 AM, Florian Fainelli wrote:
> 
> 
> On 4/13/2023 6:38 AM, Yan Wang wrote:
>> The system hang because of dsa_tag_8021q_port_setup()->
>>                 stmmac_vlan_rx_add_vid().
>>
>> I found in stmmac_drv_probe() that cailing pm_runtime_put()
>> disabled the clock.
>>
>> First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
>> resume/suspend is active.
>>
>> Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
>> will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
>> The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
>> registers after stmmac's clock is closed.
>>
>> I would suggest adding the pm_runtime_resume_and_get() to the
>> stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
>> while in use.
>>
>> Signed-off-by: Yan Wang <rk.code@outlook.com>
> 
> You have posted this patch several times now yet not on 
> netdev@vger.kernel or towards the maintainers of the drivers, please 
> consider using scripts/get_maintainer.pl.

Was looking at an older version you did copy the proper recipients.

> 
> While it looks like you are fixing a bug, it would be worthy of 
> providing a suitable Fixes: tag since this is a genuine bugfix. You 
> should also consider providing the target tree: 'net' for bug fixes and 
> 'net-next' for features, and also provide a version counter in the 
> subject 'PATCH v4' or something like that.

-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[Jacob Keller]

On 4/13/2023 6:38 AM, Yan Wang wrote:
> The system hang because of dsa_tag_8021q_port_setup()->
> 				stmmac_vlan_rx_add_vid().
> 
> I found in stmmac_drv_probe() that cailing pm_runtime_put()
> disabled the clock.
> 
> First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
> resume/suspend is active.
> 
> Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
> will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
> The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
> registers after stmmac's clock is closed.
> 

And access to the registers basically just waits because its clock is
stopped?

> I would suggest adding the pm_runtime_resume_and_get() to the
> stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
> while in use.
> 

It feels a bit odd to need this within the VLAN function, but these can
be entered at an odd time where its possible that the clock has been
closed... Ok.

> Signed-off-by: Yan Wang <rk.code@outlook.com>
> ---

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>

>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index d7fcab057032..f9cd063f1fe3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -6350,6 +6350,10 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
>  	bool is_double = false;
>  	int ret;
>  
> +	ret = pm_runtime_resume_and_get(priv->device);
> +	if (ret < 0)
> +		return ret;
> +
>  	if (be16_to_cpu(proto) == ETH_P_8021AD)
>  		is_double = true;
>  
> @@ -6357,16 +6361,18 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
>  	ret = stmmac_vlan_update(priv, is_double);
>  	if (ret) {
>  		clear_bit(vid, priv->active_vlans);
> -		return ret;
> +		goto err_pm_put;
>  	}
>  
>  	if (priv->hw->num_vlan) {
>  		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
>  		if (ret)
> -			return ret;
> +			goto err_pm_put;
>  	}
> +err_pm_put:
> +	pm_runtime_put(priv->device);
>  
> -	return 0;
> +	return ret;
>  }
>  
>  static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[Jacob Keller]

On 4/13/2023 6:38 AM, Yan Wang wrote:
> The system hang because of dsa_tag_8021q_port_setup()->
> 				stmmac_vlan_rx_add_vid().
> 
> I found in stmmac_drv_probe() that cailing pm_runtime_put()
> disabled the clock.
> 
> First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
> resume/suspend is active.
> 
> Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
> will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
> The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
> registers after stmmac's clock is closed.
> 

And access to the registers basically just waits because its clock is
stopped?

> I would suggest adding the pm_runtime_resume_and_get() to the
> stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
> while in use.
> 

It feels a bit odd to need this within the VLAN function, but these can
be entered at an odd time where its possible that the clock has been
closed... Ok.

> Signed-off-by: Yan Wang <rk.code@outlook.com>
> ---

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>

>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index d7fcab057032..f9cd063f1fe3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -6350,6 +6350,10 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
>  	bool is_double = false;
>  	int ret;
>  
> +	ret = pm_runtime_resume_and_get(priv->device);
> +	if (ret < 0)
> +		return ret;
> +
>  	if (be16_to_cpu(proto) == ETH_P_8021AD)
>  		is_double = true;
>  
> @@ -6357,16 +6361,18 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
>  	ret = stmmac_vlan_update(priv, is_double);
>  	if (ret) {
>  		clear_bit(vid, priv->active_vlans);
> -		return ret;
> +		goto err_pm_put;
>  	}
>  
>  	if (priv->hw->num_vlan) {
>  		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
>  		if (ret)
> -			return ret;
> +			goto err_pm_put;
>  	}
> +err_pm_put:
> +	pm_runtime_put(priv->device);
>  
> -	return 0;
> +	return ret;
>  }
>  
>  static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)

[PATCH net-next v6] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[Yan Wang]

The system hang because of dsa_tag_8021q_port_setup()->
				stmmac_vlan_rx_add_vid().

I found in stmmac_drv_probe() that cailing pm_runtime_put()
disabled the clock.

First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
resume/suspend is active.

Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
registers after stmmac's clock is closed.

I would suggest adding the pm_runtime_resume_and_get() to the
stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
while in use.

Fixes: b3dcb3127786 ("net: stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yan Wang <rk.code@outlook.com>
---
v6:
  - Add Reviewed Signature
v5: https://lore.kernel.org/netdev/KL1PR01MB544863D839654F0EC9485894E69C9@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - Add version tags.
v4: https://lore.kernel.org/netdev/KL1PR01MB5448C7BF5A7AAC1CBCD5C36AE6989@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - Fixed email address,but The Version number is wrong.
v3: https://lore.kernel.org/netdev/KL1PR01MB544872920F00149E3BDDC7ECE6999@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - Fixed the Fixes tag,but Missing version change log.
v2: https://lore.kernel.org/netdev/KL1PR01MB54482D50B5C8713A2CA697DFE6999@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - Add a error fixed tag.
v1: https://lore.kernel.org/netdev/KL1PR01MB5448020DE191340AE64530B0E6989@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - the Subject is set incorrectly
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d7fcab057032..f9cd063f1fe3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6350,6 +6350,10 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 	bool is_double = false;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(priv->device);
+	if (ret < 0)
+		return ret;
+
 	if (be16_to_cpu(proto) == ETH_P_8021AD)
 		is_double = true;
 
@@ -6357,16 +6361,18 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 	ret = stmmac_vlan_update(priv, is_double);
 	if (ret) {
 		clear_bit(vid, priv->active_vlans);
-		return ret;
+		goto err_pm_put;
 	}
 
 	if (priv->hw->num_vlan) {
 		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
 		if (ret)
-			return ret;
+			goto err_pm_put;
 	}
+err_pm_put:
+	pm_runtime_put(priv->device);
 
-	return 0;
+	return ret;
 }
 
 static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH net-next v6] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[Yan Wang]

The system hang because of dsa_tag_8021q_port_setup()->
				stmmac_vlan_rx_add_vid().

I found in stmmac_drv_probe() that cailing pm_runtime_put()
disabled the clock.

First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
resume/suspend is active.

Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
registers after stmmac's clock is closed.

I would suggest adding the pm_runtime_resume_and_get() to the
stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
while in use.

Fixes: b3dcb3127786 ("net: stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yan Wang <rk.code@outlook.com>
---
v6:
  - Add Reviewed Signature
v5: https://lore.kernel.org/netdev/KL1PR01MB544863D839654F0EC9485894E69C9@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - Add version tags.
v4: https://lore.kernel.org/netdev/KL1PR01MB5448C7BF5A7AAC1CBCD5C36AE6989@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - Fixed email address,but The Version number is wrong.
v3: https://lore.kernel.org/netdev/KL1PR01MB544872920F00149E3BDDC7ECE6999@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - Fixed the Fixes tag,but Missing version change log.
v2: https://lore.kernel.org/netdev/KL1PR01MB54482D50B5C8713A2CA697DFE6999@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - Add a error fixed tag.
v1: https://lore.kernel.org/netdev/KL1PR01MB5448020DE191340AE64530B0E6989@KL1PR01MB5448.apcprd01.prod.exchangelabs.com/
  - the Subject is set incorrectly
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d7fcab057032..f9cd063f1fe3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6350,6 +6350,10 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 	bool is_double = false;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(priv->device);
+	if (ret < 0)
+		return ret;
+
 	if (be16_to_cpu(proto) == ETH_P_8021AD)
 		is_double = true;
 
@@ -6357,16 +6361,18 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid
 	ret = stmmac_vlan_update(priv, is_double);
 	if (ret) {
 		clear_bit(vid, priv->active_vlans);
-		return ret;
+		goto err_pm_put;
 	}
 
 	if (priv->hw->num_vlan) {
 		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
 		if (ret)
-			return ret;
+			goto err_pm_put;
 	}
+err_pm_put:
+	pm_runtime_put(priv->device);
 
-	return 0;
+	return ret;
 }
 
 static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
-- 
2.17.1

Re: [PATCH net-next v6] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Wed, 19 Apr 2023 22:13:46 +0800 you wrote:
> The system hang because of dsa_tag_8021q_port_setup()->
> 				stmmac_vlan_rx_add_vid().
> 
> I found in stmmac_drv_probe() that cailing pm_runtime_put()
> disabled the clock.
> 
> First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
> resume/suspend is active.
> 
> [...]

Here is the summary with links:
  - [net-next,v6] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports
    https://git.kernel.org/netdev/net-next/c/35226750f7ab

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v6] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Wed, 19 Apr 2023 22:13:46 +0800 you wrote:
> The system hang because of dsa_tag_8021q_port_setup()->
> 				stmmac_vlan_rx_add_vid().
> 
> I found in stmmac_drv_probe() that cailing pm_runtime_put()
> disabled the clock.
> 
> First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
> resume/suspend is active.
> 
> [...]

Here is the summary with links:
  - [net-next,v6] net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports
    https://git.kernel.org/netdev/net-next/c/35226750f7ab

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html