From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add I2C DT support
Date: Wed, 19 Aug 2015 22:00:09 +0000 [thread overview]
Message-ID: <1683106.jUSrvORJGA@wasted.cogentembedded.com> (raw)
In-Reply-To: <2390854.nqPs17CVpc@wasted.cogentembedded.com>
Define the generic R8A7794 parts of the I2C[0-5] device nodes.
Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm/boot/dts/r8a7794.dtsi | 73 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -20,6 +20,12 @@
#size-cells = <2>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
spi0 = &qspi;
};
@@ -500,6 +506,73 @@
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
+ };
+
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c@e6508000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
mmcif0: mmc@ee200000 {
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add I2C DT support
Date: Thu, 20 Aug 2015 01:00:09 +0300 [thread overview]
Message-ID: <1683106.jUSrvORJGA@wasted.cogentembedded.com> (raw)
In-Reply-To: <2390854.nqPs17CVpc@wasted.cogentembedded.com>
Define the generic R8A7794 parts of the I2C[0-5] device nodes.
Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm/boot/dts/r8a7794.dtsi | 73 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -20,6 +20,12 @@
#size-cells = <2>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
spi0 = &qspi;
};
@@ -500,6 +506,73 @@
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
+ };
+
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c at e6508000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at e6518000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at e6530000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at e6540000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at e6520000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at e6528000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
mmcif0: mmc at ee200000 {
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-sh@vger.kernel.org, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add I2C DT support
Date: Thu, 20 Aug 2015 01:00:09 +0300 [thread overview]
Message-ID: <1683106.jUSrvORJGA@wasted.cogentembedded.com> (raw)
In-Reply-To: <2390854.nqPs17CVpc@wasted.cogentembedded.com>
Define the generic R8A7794 parts of the I2C[0-5] device nodes.
Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm/boot/dts/r8a7794.dtsi | 73 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -20,6 +20,12 @@
#size-cells = <2>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
spi0 = &qspi;
};
@@ -500,6 +506,73 @@
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
+ };
+
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c@e6508000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
mmcif0: mmc@ee200000 {
next prev parent reply other threads:[~2015-08-19 22:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-19 21:57 [PATCH 0/2] Add R8A7794/SILK I2C device tree support Sergei Shtylyov
2015-08-19 21:57 ` Sergei Shtylyov
2015-08-19 21:57 ` Sergei Shtylyov
2015-08-19 22:00 ` Sergei Shtylyov [this message]
2015-08-19 22:00 ` [PATCH 1/2] ARM: shmobile: r8a7794: add I2C DT support Sergei Shtylyov
2015-08-19 22:00 ` Sergei Shtylyov
2015-08-19 22:05 ` [PATCH 2/2] ARM: shmobile: silk: add I2C1 " Sergei Shtylyov
2015-08-19 22:05 ` Sergei Shtylyov
2015-08-19 22:05 ` Sergei Shtylyov
2015-08-19 22:08 ` [PATCH 0/2] Add R8A7794/SILK I2C device tree support Sergei Shtylyov
2015-08-19 22:08 ` Sergei Shtylyov
2015-08-19 22:08 ` Sergei Shtylyov
2015-08-20 18:54 ` Simon Horman
2015-08-20 18:54 ` Simon Horman
2015-08-20 18:54 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1683106.jUSrvORJGA@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.