Re: mtd: nand: atmel: probe of Spansion S34ML02G1 fails

[Alexander Dahl <ada@thorsis.com>]

Hei hei,

Am Donnerstag, 27. Juli 2017, 21:27:03 schrieb Boris Brezillon:
> Did you have time to test with f9ce2eddf176 ("mtd: nand: atmel: Add
> ->setup_data_interface() hooks") reverted? BTW, it's probably simpler
> to just comment out this line [1]

This does not revert cleanly.

> [1]http://elixir.free-electrons.com/linux/v4.13-rc2/source/drivers/mtd
> /nand/atmel/nand-controller.c#L1493

I tried this in atmel_nand_init():

+       /*
        if (nc->mck && nc->caps->ops->setup_data_interface)
                chip->setup_data_interface = atmel_nand_setup_data_interface;
+       */

So this basically skips all those timing init, right? If I do this I get 
the timings which were applied in U-Boot and the NAND-Flash just works.

Greets
Alex