* [PATCH v3 1/2] bus: ts-nbus: Convert to atomic pwm API
2024-01-24 8:12 [PATCH v3 0/2] bus: ts-nbus: Two improvements Uwe Kleine-König
@ 2024-01-24 8:12 ` Uwe Kleine-König
2024-03-12 20:09 ` Arnd Bergmann
2024-01-24 8:12 ` [PATCH v3 2/2] bus: ts-nbus: Improve error reporting Uwe Kleine-König
2024-03-12 20:30 ` [PATCH v3 0/2] bus: ts-nbus: Two improvements patchwork-bot+linux-soc
2 siblings, 1 reply; 5+ messages in thread
From: Uwe Kleine-König @ 2024-01-24 8:12 UTC (permalink / raw)
To: Arnd Bergmann, soc; +Cc: linux-pwm, linux-kernel, kernel, Sebastien Bourdelin
With this change the PWM hardware is only configured once (instead of
three times).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/bus/ts-nbus.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index 4fa932cb0915..19c5d1f4e4d7 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -273,7 +273,7 @@ EXPORT_SYMBOL_GPL(ts_nbus_write);
static int ts_nbus_probe(struct platform_device *pdev)
{
struct pwm_device *pwm;
- struct pwm_args pargs;
+ struct pwm_state state;
struct device *dev = &pdev->dev;
struct ts_nbus *ts_nbus;
int ret;
@@ -296,25 +296,22 @@ static int ts_nbus_probe(struct platform_device *pdev)
return ret;
}
- pwm_get_args(pwm, &pargs);
- if (!pargs.period) {
+ pwm_init_state(pwm, &state);
+ if (!state.period) {
dev_err(&pdev->dev, "invalid PWM period\n");
return -EINVAL;
}
- /*
- * FIXME: pwm_apply_args() should be removed when switching to
- * the atomic PWM API.
- */
- pwm_apply_args(pwm);
- ret = pwm_config(pwm, pargs.period, pargs.period);
+ state.duty_cycle = state.period;
+ state.enabled = true;
+
+ ret = pwm_apply_state(pwm, &state);
if (ret < 0)
return ret;
/*
* we can now start the FPGA and populate the peripherals.
*/
- pwm_enable(pwm);
ts_nbus->pwm = pwm;
/*
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v3 2/2] bus: ts-nbus: Improve error reporting
2024-01-24 8:12 [PATCH v3 0/2] bus: ts-nbus: Two improvements Uwe Kleine-König
2024-01-24 8:12 ` [PATCH v3 1/2] bus: ts-nbus: Convert to atomic pwm API Uwe Kleine-König
@ 2024-01-24 8:12 ` Uwe Kleine-König
2024-03-12 20:30 ` [PATCH v3 0/2] bus: ts-nbus: Two improvements patchwork-bot+linux-soc
2 siblings, 0 replies; 5+ messages in thread
From: Uwe Kleine-König @ 2024-01-24 8:12 UTC (permalink / raw)
To: Arnd Bergmann, soc; +Cc: linux-pwm, linux-kernel, kernel, Sebastien Bourdelin
Using dev_err_probe() brings several improvements:
- emits the symbolic error code
- properly handles EPROBE_DEFER
- combines error message generation and return value handling
While at it add error messages to two error paths that were silent
before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/bus/ts-nbus.c | 66 ++++++++++++++++++-------------------------
1 file changed, 28 insertions(+), 38 deletions(-)
diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index 19c5d1f4e4d7..baf22a82c47a 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -39,45 +39,39 @@ struct ts_nbus {
/*
* request all gpios required by the bus.
*/
-static int ts_nbus_init_pdata(struct platform_device *pdev, struct ts_nbus
- *ts_nbus)
+static int ts_nbus_init_pdata(struct platform_device *pdev,
+ struct ts_nbus *ts_nbus)
{
ts_nbus->data = devm_gpiod_get_array(&pdev->dev, "ts,data",
GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->data)) {
- dev_err(&pdev->dev, "failed to retrieve ts,data-gpio from dts\n");
- return PTR_ERR(ts_nbus->data);
- }
+ if (IS_ERR(ts_nbus->data))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->data),
+ "failed to retrieve ts,data-gpio from dts\n");
ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->csn)) {
- dev_err(&pdev->dev, "failed to retrieve ts,csn-gpio from dts\n");
- return PTR_ERR(ts_nbus->csn);
- }
+ if (IS_ERR(ts_nbus->csn))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->csn),
+ "failed to retrieve ts,csn-gpio from dts\n");
ts_nbus->txrx = devm_gpiod_get(&pdev->dev, "ts,txrx", GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->txrx)) {
- dev_err(&pdev->dev, "failed to retrieve ts,txrx-gpio from dts\n");
- return PTR_ERR(ts_nbus->txrx);
- }
+ if (IS_ERR(ts_nbus->txrx))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->txrx),
+ "failed to retrieve ts,txrx-gpio from dts\n");
ts_nbus->strobe = devm_gpiod_get(&pdev->dev, "ts,strobe", GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->strobe)) {
- dev_err(&pdev->dev, "failed to retrieve ts,strobe-gpio from dts\n");
- return PTR_ERR(ts_nbus->strobe);
- }
+ if (IS_ERR(ts_nbus->strobe))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->strobe),
+ "failed to retrieve ts,strobe-gpio from dts\n");
ts_nbus->ale = devm_gpiod_get(&pdev->dev, "ts,ale", GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->ale)) {
- dev_err(&pdev->dev, "failed to retrieve ts,ale-gpio from dts\n");
- return PTR_ERR(ts_nbus->ale);
- }
+ if (IS_ERR(ts_nbus->ale))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->ale),
+ "failed to retrieve ts,ale-gpio from dts\n");
ts_nbus->rdy = devm_gpiod_get(&pdev->dev, "ts,rdy", GPIOD_IN);
- if (IS_ERR(ts_nbus->rdy)) {
- dev_err(&pdev->dev, "failed to retrieve ts,rdy-gpio from dts\n");
- return PTR_ERR(ts_nbus->rdy);
- }
+ if (IS_ERR(ts_nbus->rdy))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->rdy),
+ "failed to retrieve ts,rdy-gpio from dts\n");
return 0;
}
@@ -289,25 +283,20 @@ static int ts_nbus_probe(struct platform_device *pdev)
return ret;
pwm = devm_pwm_get(dev, NULL);
- if (IS_ERR(pwm)) {
- ret = PTR_ERR(pwm);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "unable to request PWM\n");
- return ret;
- }
+ if (IS_ERR(pwm))
+ return dev_err_probe(dev, PTR_ERR(pwm),
+ "unable to request PWM\n");
pwm_init_state(pwm, &state);
- if (!state.period) {
- dev_err(&pdev->dev, "invalid PWM period\n");
- return -EINVAL;
- }
+ if (!state.period)
+ return dev_err_probe(dev, -EINVAL, "invalid PWM period\n");
state.duty_cycle = state.period;
state.enabled = true;
ret = pwm_apply_state(pwm, &state);
if (ret < 0)
- return ret;
+ return dev_err_probe(dev, ret, "failed to configure PWM\n");
/*
* we can now start the FPGA and populate the peripherals.
@@ -321,7 +310,8 @@ static int ts_nbus_probe(struct platform_device *pdev)
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret < 0)
- return ret;
+ return dev_err_probe(dev, ret,
+ "failed to populate platform devices on bus\n");
dev_info(dev, "initialized\n");
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread