[PATCH v3 00/32] spi: get rid of some legacy macros

[PATCH v3 00/32] spi: get rid of some legacy macros

[Uwe Kleine-König]

Changes since v2
(https://lore.kernel.org/linux-spi/cover.1705944943.git.u.kleine-koenig@pengutronix.de):

 - Drop patch "mtd: rawnand: fsl_elbc: Let .probe retry if local bus is
   missing" which doesn't belong into this series.
 - Fix a build failure noticed by the kernel build bot in
   drivers/spi/spi-au1550.c. (I failed to catch this because this driver
   is mips only, but not enabled in a mips allmodconfig. That's a bit
   unfortunate, but not easily fixable.)
 - Add the Reviewed-by: and Acked-by: tags I received for v2.

Mark already announced for v2 that he is willing to apply the whole
series to his spi tree. Assuming no other show stoper are found in this
v3, I assume that's the plan still for this series now.

Thanks
Uwe

Uwe Kleine-König (32):
  fpga: ice40-spi: Follow renaming of SPI "master" to "controller"
  ieee802154: ca8210: Follow renaming of SPI "master" to "controller"
  iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"
  Input: pxspad - follow renaming of SPI "master" to "controller"
  Input: synaptics-rmi4 - follow renaming of SPI "master" to "controller"
  media: mgb4: Follow renaming of SPI "master" to "controller"
  media: netup_unidvb: Follow renaming of SPI "master" to "controller"
  media: usb/msi2500: Follow renaming of SPI "master" to "controller"
  media: v4l2-subdev: Follow renaming of SPI "master" to "controller"
  misc: gehc-achc: Follow renaming of SPI "master" to "controller"
  mmc: mmc_spi: Follow renaming of SPI "master" to "controller"
  mtd: dataflash: Follow renaming of SPI "master" to "controller"
  net: ks8851: Follow renaming of SPI "master" to "controller"
  net: vertexcom: mse102x: Follow renaming of SPI "master" to "controller"
  platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
  spi: bitbang: Follow renaming of SPI "master" to "controller"
  spi: cadence-quadspi: Don't emit error message on allocation error
  spi: cadence-quadspi: Follow renaming of SPI "master" to "controller"
  spi: cavium: Follow renaming of SPI "master" to "controller"
  spi: geni-qcom: Follow renaming of SPI "master" to "controller"
  spi: loopback-test: Follow renaming of SPI "master" to "controller"
  spi: slave-mt27xx: Follow renaming of SPI "master" to "controller"
  spi: spidev: Follow renaming of SPI "master" to "controller"
  staging: fbtft: Follow renaming of SPI "master" to "controller"
  staging: greybus: spi: Follow renaming of SPI "master" to "controller"
  tpm_tis_spi: Follow renaming of SPI "master" to "controller"
  usb: gadget: max3420_udc: Follow renaming of SPI "master" to "controller"
  video: fbdev: mmp: Follow renaming of SPI "master" to "controller"
  wifi: libertas: Follow renaming of SPI "master" to "controller"
  spi: fsl-lib: Follow renaming of SPI "master" to "controller"
  spi: Drop compat layer from renaming "master" to "controller"
  Documentation: spi: Update documentation for renaming "master" to "controller"

 .../driver-api/driver-model/devres.rst        |  2 +-
 Documentation/spi/spi-summary.rst             | 74 +++++++++----------
 drivers/char/tpm/tpm_tis_spi_main.c           |  4 +-
 drivers/fpga/ice40-spi.c                      |  4 +-
 drivers/iio/adc/ad_sigma_delta.c              | 14 ++--
 drivers/input/joystick/psxpad-spi.c           |  4 +-
 drivers/input/rmi4/rmi_spi.c                  |  2 +-
 drivers/media/pci/mgb4/mgb4_core.c            | 14 ++--
 .../media/pci/netup_unidvb/netup_unidvb_spi.c | 48 ++++++------
 drivers/media/usb/msi2500/msi2500.c           | 38 +++++-----
 drivers/media/v4l2-core/v4l2-spi.c            |  4 +-
 drivers/misc/gehc-achc.c                      |  8 +-
 drivers/mmc/host/mmc_spi.c                    |  6 +-
 drivers/mtd/devices/mtd_dataflash.c           |  2 +-
 drivers/net/ethernet/micrel/ks8851_spi.c      |  4 +-
 drivers/net/ethernet/vertexcom/mse102x.c      |  2 +-
 drivers/net/ieee802154/ca8210.c               |  2 +-
 .../net/wireless/marvell/libertas/if_spi.c    |  2 +-
 drivers/platform/chrome/cros_ec_spi.c         |  8 +-
 drivers/spi/spi-ath79.c                       |  4 +-
 drivers/spi/spi-au1550.c                      |  2 +-
 drivers/spi/spi-bitbang.c                     | 64 ++++++++--------
 drivers/spi/spi-butterfly.c                   |  6 +-
 drivers/spi/spi-cadence-quadspi.c             |  7 +-
 drivers/spi/spi-cavium.c                      |  6 +-
 drivers/spi/spi-cavium.h                      |  2 +-
 drivers/spi/spi-davinci.c                     |  6 +-
 drivers/spi/spi-fsl-lib.c                     | 14 ++--
 drivers/spi/spi-geni-qcom.c                   |  2 +-
 drivers/spi/spi-gpio.c                        |  2 +-
 drivers/spi/spi-lm70llp.c                     |  6 +-
 drivers/spi/spi-loopback-test.c               |  4 +-
 drivers/spi/spi-oc-tiny.c                     |  6 +-
 drivers/spi/spi-omap-uwire.c                  |  4 +-
 drivers/spi/spi-sh-sci.c                      | 10 +--
 drivers/spi/spi-slave-mt27xx.c                |  2 +-
 drivers/spi/spi-xilinx.c                      |  4 +-
 drivers/spi/spi-xtensa-xtfpga.c               |  2 +-
 drivers/spi/spi.c                             |  2 +-
 drivers/spi/spidev.c                          |  2 +-
 drivers/staging/fbtft/fbtft-core.c            |  4 +-
 drivers/staging/greybus/spilib.c              | 66 ++++++++---------
 drivers/usb/gadget/udc/max3420_udc.c          |  2 +-
 drivers/video/fbdev/mmp/hw/mmp_spi.c          | 26 +++----
 include/linux/spi/spi.h                       | 20 +----
 include/linux/spi/spi_bitbang.h               |  2 +-
 include/media/v4l2-common.h                   |  6 +-
 47 files changed, 253 insertions(+), 272 deletions(-)


base-commit: b9b98f594b6f4c0b0fb2da4493453aef183bca4b
-- 
2.43.0

[PATCH v3 00/32] spi: get rid of some legacy macros

[Uwe Kleine-König]

Changes since v2
(https://lore.kernel.org/linux-spi/cover.1705944943.git.u.kleine-koenig@pengutronix.de):

 - Drop patch "mtd: rawnand: fsl_elbc: Let .probe retry if local bus is
   missing" which doesn't belong into this series.
 - Fix a build failure noticed by the kernel build bot in
   drivers/spi/spi-au1550.c. (I failed to catch this because this driver
   is mips only, but not enabled in a mips allmodconfig. That's a bit
   unfortunate, but not easily fixable.)
 - Add the Reviewed-by: and Acked-by: tags I received for v2.

Mark already announced for v2 that he is willing to apply the whole
series to his spi tree. Assuming no other show stoper are found in this
v3, I assume that's the plan still for this series now.

Thanks
Uwe

Uwe Kleine-König (32):
  fpga: ice40-spi: Follow renaming of SPI "master" to "controller"
  ieee802154: ca8210: Follow renaming of SPI "master" to "controller"
  iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"
  Input: pxspad - follow renaming of SPI "master" to "controller"
  Input: synaptics-rmi4 - follow renaming of SPI "master" to "controller"
  media: mgb4: Follow renaming of SPI "master" to "controller"
  media: netup_unidvb: Follow renaming of SPI "master" to "controller"
  media: usb/msi2500: Follow renaming of SPI "master" to "controller"
  media: v4l2-subdev: Follow renaming of SPI "master" to "controller"
  misc: gehc-achc: Follow renaming of SPI "master" to "controller"
  mmc: mmc_spi: Follow renaming of SPI "master" to "controller"
  mtd: dataflash: Follow renaming of SPI "master" to "controller"
  net: ks8851: Follow renaming of SPI "master" to "controller"
  net: vertexcom: mse102x: Follow renaming of SPI "master" to "controller"
  platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
  spi: bitbang: Follow renaming of SPI "master" to "controller"
  spi: cadence-quadspi: Don't emit error message on allocation error
  spi: cadence-quadspi: Follow renaming of SPI "master" to "controller"
  spi: cavium: Follow renaming of SPI "master" to "controller"
  spi: geni-qcom: Follow renaming of SPI "master" to "controller"
  spi: loopback-test: Follow renaming of SPI "master" to "controller"
  spi: slave-mt27xx: Follow renaming of SPI "master" to "controller"
  spi: spidev: Follow renaming of SPI "master" to "controller"
  staging: fbtft: Follow renaming of SPI "master" to "controller"
  staging: greybus: spi: Follow renaming of SPI "master" to "controller"
  tpm_tis_spi: Follow renaming of SPI "master" to "controller"
  usb: gadget: max3420_udc: Follow renaming of SPI "master" to "controller"
  video: fbdev: mmp: Follow renaming of SPI "master" to "controller"
  wifi: libertas: Follow renaming of SPI "master" to "controller"
  spi: fsl-lib: Follow renaming of SPI "master" to "controller"
  spi: Drop compat layer from renaming "master" to "controller"
  Documentation: spi: Update documentation for renaming "master" to "controller"

 .../driver-api/driver-model/devres.rst        |  2 +-
 Documentation/spi/spi-summary.rst             | 74 +++++++++----------
 drivers/char/tpm/tpm_tis_spi_main.c           |  4 +-
 drivers/fpga/ice40-spi.c                      |  4 +-
 drivers/iio/adc/ad_sigma_delta.c              | 14 ++--
 drivers/input/joystick/psxpad-spi.c           |  4 +-
 drivers/input/rmi4/rmi_spi.c                  |  2 +-
 drivers/media/pci/mgb4/mgb4_core.c            | 14 ++--
 .../media/pci/netup_unidvb/netup_unidvb_spi.c | 48 ++++++------
 drivers/media/usb/msi2500/msi2500.c           | 38 +++++-----
 drivers/media/v4l2-core/v4l2-spi.c            |  4 +-
 drivers/misc/gehc-achc.c                      |  8 +-
 drivers/mmc/host/mmc_spi.c                    |  6 +-
 drivers/mtd/devices/mtd_dataflash.c           |  2 +-
 drivers/net/ethernet/micrel/ks8851_spi.c      |  4 +-
 drivers/net/ethernet/vertexcom/mse102x.c      |  2 +-
 drivers/net/ieee802154/ca8210.c               |  2 +-
 .../net/wireless/marvell/libertas/if_spi.c    |  2 +-
 drivers/platform/chrome/cros_ec_spi.c         |  8 +-
 drivers/spi/spi-ath79.c                       |  4 +-
 drivers/spi/spi-au1550.c                      |  2 +-
 drivers/spi/spi-bitbang.c                     | 64 ++++++++--------
 drivers/spi/spi-butterfly.c                   |  6 +-
 drivers/spi/spi-cadence-quadspi.c             |  7 +-
 drivers/spi/spi-cavium.c                      |  6 +-
 drivers/spi/spi-cavium.h                      |  2 +-
 drivers/spi/spi-davinci.c                     |  6 +-
 drivers/spi/spi-fsl-lib.c                     | 14 ++--
 drivers/spi/spi-geni-qcom.c                   |  2 +-
 drivers/spi/spi-gpio.c                        |  2 +-
 drivers/spi/spi-lm70llp.c                     |  6 +-
 drivers/spi/spi-loopback-test.c               |  4 +-
 drivers/spi/spi-oc-tiny.c                     |  6 +-
 drivers/spi/spi-omap-uwire.c                  |  4 +-
 drivers/spi/spi-sh-sci.c                      | 10 +--
 drivers/spi/spi-slave-mt27xx.c                |  2 +-
 drivers/spi/spi-xilinx.c                      |  4 +-
 drivers/spi/spi-xtensa-xtfpga.c               |  2 +-
 drivers/spi/spi.c                             |  2 +-
 drivers/spi/spidev.c                          |  2 +-
 drivers/staging/fbtft/fbtft-core.c            |  4 +-
 drivers/staging/greybus/spilib.c              | 66 ++++++++---------
 drivers/usb/gadget/udc/max3420_udc.c          |  2 +-
 drivers/video/fbdev/mmp/hw/mmp_spi.c          | 26 +++----
 include/linux/spi/spi.h                       | 20 +----
 include/linux/spi/spi_bitbang.h               |  2 +-
 include/media/v4l2-common.h                   |  6 +-
 47 files changed, 253 insertions(+), 272 deletions(-)


base-commit: b9b98f594b6f4c0b0fb2da4493453aef183bca4b
-- 
2.43.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 01/32] fpga: ice40-spi: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/fpga/ice40-spi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
index 7cbb3558b844..c0028ae4c5b7 100644
--- a/drivers/fpga/ice40-spi.c
+++ b/drivers/fpga/ice40-spi.c
@@ -66,7 +66,7 @@ static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
 	}
 
 	/* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
-	spi_bus_lock(dev->master);
+	spi_bus_lock(dev->controller);
 
 	gpiod_set_value(priv->reset, 1);
 
@@ -94,7 +94,7 @@ static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
 	ret = spi_sync_locked(dev, &message);
 
 fail:
-	spi_bus_unlock(dev->master);
+	spi_bus_unlock(dev->controller);
 
 	return ret;
 }
-- 
2.43.0

Re: [PATCH v3 01/32] fpga: ice40-spi: Follow renaming of SPI "master" to "controller"

[Jonathan Cameron]

On Wed, 7 Feb 2024 19:40:15 +0100
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> wrote:

> In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
> some functions and struct members were renamed. To not break all drivers
> compatibility macros were provided.
> 
> To be able to remove these compatibility macros push the renaming into
> this driver.
> 
> Acked-by: Xu Yilun <yilun.xu@intel.com>
> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Looks like b4 or similar got carried away. I've no objection to any of these
but the ack was only really meant to be for the IIO one.

> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  drivers/fpga/ice40-spi.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
> index 7cbb3558b844..c0028ae4c5b7 100644
> --- a/drivers/fpga/ice40-spi.c
> +++ b/drivers/fpga/ice40-spi.c
> @@ -66,7 +66,7 @@ static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
>  	}
>  
>  	/* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
> -	spi_bus_lock(dev->master);
> +	spi_bus_lock(dev->controller);
>  
>  	gpiod_set_value(priv->reset, 1);
>  
> @@ -94,7 +94,7 @@ static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
>  	ret = spi_sync_locked(dev, &message);
>  
>  fail:
> -	spi_bus_unlock(dev->master);
> +	spi_bus_unlock(dev->controller);
>  
>  	return ret;
>  }

Re: [PATCH v3 01/32] fpga: ice40-spi: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 1216 bytes --]

On Thu, Feb 08, 2024 at 10:09:09AM +0000, Jonathan Cameron wrote:
> On Wed, 7 Feb 2024 19:40:15 +0100
> Uwe Kleine-König <u.kleine-koenig@pengutronix.de> wrote:
> 
> > In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
> > some functions and struct members were renamed. To not break all drivers
> > compatibility macros were provided.
> > 
> > To be able to remove these compatibility macros push the renaming into
> > this driver.
> > 
> > Acked-by: Xu Yilun <yilun.xu@intel.com>
> > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Looks like b4 or similar got carried away. I've no objection to any of these
> but the ack was only really meant to be for the IIO one.

Ah, indeed. b4 interpreted your ack as applying to the whole series
because it was given in reply to the cover letter.

If you're indifferent here (and want to improve your ack count :-) I'd
keep it as is. I'd expect that Mark will apply the series, if there
appears a need for a v4 I can drop your Acks again.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v3 02/32] ieee802154: ca8210: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/net/ieee802154/ca8210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index 4ec0dab38872..f732c150462b 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -2956,7 +2956,7 @@ static int ca8210_test_interface_init(struct ca8210_priv *priv)
 		node_name,
 		sizeof(node_name),
 		"ca8210@%d_%d",
-		priv->spi->master->bus_num,
+		priv->spi->controller->bus_num,
 		spi_get_chipselect(priv->spi, 0)
 	);
 
-- 
2.43.0

[PATCH v3 03/32] iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/iio/adc/ad_sigma_delta.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index 7e2192870743..55442eddf57c 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -212,7 +212,7 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
 	if (ret)
 		return ret;
 
-	spi_bus_lock(sigma_delta->spi->master);
+	spi_bus_lock(sigma_delta->spi->controller);
 	sigma_delta->bus_locked = true;
 	sigma_delta->keep_cs_asserted = true;
 	reinit_completion(&sigma_delta->completion);
@@ -235,7 +235,7 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
 	sigma_delta->keep_cs_asserted = false;
 	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
 	sigma_delta->bus_locked = false;
-	spi_bus_unlock(sigma_delta->spi->master);
+	spi_bus_unlock(sigma_delta->spi->controller);
 
 	return ret;
 }
@@ -287,7 +287,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 
 	ad_sigma_delta_set_channel(sigma_delta, chan->address);
 
-	spi_bus_lock(sigma_delta->spi->master);
+	spi_bus_lock(sigma_delta->spi->controller);
 	sigma_delta->bus_locked = true;
 	sigma_delta->keep_cs_asserted = true;
 	reinit_completion(&sigma_delta->completion);
@@ -322,7 +322,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 	sigma_delta->keep_cs_asserted = false;
 	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
 	sigma_delta->bus_locked = false;
-	spi_bus_unlock(sigma_delta->spi->master);
+	spi_bus_unlock(sigma_delta->spi->controller);
 	iio_device_release_direct_mode(indio_dev);
 
 	if (ret)
@@ -387,7 +387,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
 
 	sigma_delta->samples_buf = samples_buf;
 
-	spi_bus_lock(sigma_delta->spi->master);
+	spi_bus_lock(sigma_delta->spi->controller);
 	sigma_delta->bus_locked = true;
 	sigma_delta->keep_cs_asserted = true;
 
@@ -401,7 +401,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
 	return 0;
 
 err_unlock:
-	spi_bus_unlock(sigma_delta->spi->master);
+	spi_bus_unlock(sigma_delta->spi->controller);
 
 	return ret;
 }
@@ -426,7 +426,7 @@ static int ad_sd_buffer_postdisable(struct iio_dev *indio_dev)
 
 	ad_sigma_delta_disable_all(sigma_delta);
 	sigma_delta->bus_locked = false;
-	return spi_bus_unlock(sigma_delta->spi->master);
+	return spi_bus_unlock(sigma_delta->spi->controller);
 }
 
 static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
-- 
2.43.0

Re: [PATCH v3 03/32] iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"

[Nuno Sá]

On Wed, 2024-02-07 at 19:40 +0100, Uwe Kleine-König wrote:
> In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
> some functions and struct members were renamed. To not break all drivers
> compatibility macros were provided.
> 
> To be able to remove these compatibility macros push the renaming into
> this driver.
> 
> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---

Acked-by: Nuno Sa <nuno.sa@analog.com>

>  drivers/iio/adc/ad_sigma_delta.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad_sigma_delta.c
> b/drivers/iio/adc/ad_sigma_delta.c
> index 7e2192870743..55442eddf57c 100644
> --- a/drivers/iio/adc/ad_sigma_delta.c
> +++ b/drivers/iio/adc/ad_sigma_delta.c
> @@ -212,7 +212,7 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
>  	if (ret)
>  		return ret;
>  
> -	spi_bus_lock(sigma_delta->spi->master);
> +	spi_bus_lock(sigma_delta->spi->controller);
>  	sigma_delta->bus_locked = true;
>  	sigma_delta->keep_cs_asserted = true;
>  	reinit_completion(&sigma_delta->completion);
> @@ -235,7 +235,7 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
>  	sigma_delta->keep_cs_asserted = false;
>  	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
>  	sigma_delta->bus_locked = false;
> -	spi_bus_unlock(sigma_delta->spi->master);
> +	spi_bus_unlock(sigma_delta->spi->controller);
>  
>  	return ret;
>  }
> @@ -287,7 +287,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev
> *indio_dev,
>  
>  	ad_sigma_delta_set_channel(sigma_delta, chan->address);
>  
> -	spi_bus_lock(sigma_delta->spi->master);
> +	spi_bus_lock(sigma_delta->spi->controller);
>  	sigma_delta->bus_locked = true;
>  	sigma_delta->keep_cs_asserted = true;
>  	reinit_completion(&sigma_delta->completion);
> @@ -322,7 +322,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev
> *indio_dev,
>  	sigma_delta->keep_cs_asserted = false;
>  	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
>  	sigma_delta->bus_locked = false;
> -	spi_bus_unlock(sigma_delta->spi->master);
> +	spi_bus_unlock(sigma_delta->spi->controller);
>  	iio_device_release_direct_mode(indio_dev);
>  
>  	if (ret)
> @@ -387,7 +387,7 @@ static int ad_sd_buffer_postenable(struct iio_dev
> *indio_dev)
>  
>  	sigma_delta->samples_buf = samples_buf;
>  
> -	spi_bus_lock(sigma_delta->spi->master);
> +	spi_bus_lock(sigma_delta->spi->controller);
>  	sigma_delta->bus_locked = true;
>  	sigma_delta->keep_cs_asserted = true;
>  
> @@ -401,7 +401,7 @@ static int ad_sd_buffer_postenable(struct iio_dev
> *indio_dev)
>  	return 0;
>  
>  err_unlock:
> -	spi_bus_unlock(sigma_delta->spi->master);
> +	spi_bus_unlock(sigma_delta->spi->controller);
>  
>  	return ret;
>  }
> @@ -426,7 +426,7 @@ static int ad_sd_buffer_postdisable(struct iio_dev
> *indio_dev)
>  
>  	ad_sigma_delta_disable_all(sigma_delta);
>  	sigma_delta->bus_locked = false;
> -	return spi_bus_unlock(sigma_delta->spi->master);
> +	return spi_bus_unlock(sigma_delta->spi->controller);
>  }
>  
>  static irqreturn_t ad_sd_trigger_handler(int irq, void *p)

[PATCH v3 04/32] Input: pxspad - follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/input/joystick/psxpad-spi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/joystick/psxpad-spi.c b/drivers/input/joystick/psxpad-spi.c
index de734a927b4d..c47fc5f34bd0 100644
--- a/drivers/input/joystick/psxpad-spi.c
+++ b/drivers/input/joystick/psxpad-spi.c
@@ -342,8 +342,8 @@ static int psxpad_spi_probe(struct spi_device *spi)
 	spi->mode = SPI_MODE_3;
 	spi->bits_per_word = 8;
 	/* (PlayStation 1/2 joypad might be possible works 250kHz/500kHz) */
-	spi->master->min_speed_hz = 125000;
-	spi->master->max_speed_hz = 125000;
+	spi->controller->min_speed_hz = 125000;
+	spi->controller->max_speed_hz = 125000;
 	spi_setup(spi);
 
 	/* pad settings */
-- 
2.43.0

[PATCH v3 05/32] Input: synaptics-rmi4 - follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/input/rmi4/rmi_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c
index 07c866f42296..9d92129aa432 100644
--- a/drivers/input/rmi4/rmi_spi.c
+++ b/drivers/input/rmi4/rmi_spi.c
@@ -375,7 +375,7 @@ static int rmi_spi_probe(struct spi_device *spi)
 	struct rmi_device_platform_data *spi_pdata = spi->dev.platform_data;
 	int error;
 
-	if (spi->master->flags & SPI_CONTROLLER_HALF_DUPLEX)
+	if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX)
 		return -EINVAL;
 
 	rmi_spi = devm_kzalloc(&spi->dev, sizeof(struct rmi_spi_xport),
-- 
2.43.0

[PATCH v3 06/32] media: mgb4: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/media/pci/mgb4/mgb4_core.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/media/pci/mgb4/mgb4_core.c b/drivers/media/pci/mgb4/mgb4_core.c
index 5bfb8a06202e..9bcf10a77fd3 100644
--- a/drivers/media/pci/mgb4/mgb4_core.c
+++ b/drivers/media/pci/mgb4/mgb4_core.c
@@ -144,7 +144,7 @@ static int match_spi_adap(struct device *dev, void *data)
 	return to_spi_device(dev) ? 1 : 0;
 }
 
-static struct spi_master *get_spi_adap(struct platform_device *pdev)
+static struct spi_controller *get_spi_adap(struct platform_device *pdev)
 {
 	struct device *dev;
 
@@ -152,7 +152,7 @@ static struct spi_master *get_spi_adap(struct platform_device *pdev)
 	dev = device_find_child(&pdev->dev, NULL, match_spi_adap);
 	mutex_unlock(&pdev->dev.mutex);
 
-	return dev ? container_of(dev, struct spi_master, dev) : NULL;
+	return dev ? container_of(dev, struct spi_controller, dev) : NULL;
 }
 
 static int init_spi(struct mgb4_dev *mgbdev, u32 devid)
@@ -179,7 +179,7 @@ static int init_spi(struct mgb4_dev *mgbdev, u32 devid)
 	};
 	struct pci_dev *pdev = mgbdev->pdev;
 	struct device *dev = &pdev->dev;
-	struct spi_master *master;
+	struct spi_controller *ctlr;
 	struct spi_device *spi_dev;
 	u32 irq;
 	int rv, id;
@@ -207,8 +207,8 @@ static int init_spi(struct mgb4_dev *mgbdev, u32 devid)
 		return PTR_ERR(mgbdev->spi_pdev);
 	}
 
-	master = get_spi_adap(mgbdev->spi_pdev);
-	if (!master) {
+	ctlr = get_spi_adap(mgbdev->spi_pdev);
+	if (!ctlr) {
 		dev_err(dev, "failed to get SPI adapter\n");
 		rv = -EINVAL;
 		goto err_pdev;
@@ -242,8 +242,8 @@ static int init_spi(struct mgb4_dev *mgbdev, u32 devid)
 
 	spi_info.platform_data = &mgbdev->flash_data;
 
-	spi_dev = spi_new_device(master, &spi_info);
-	put_device(&master->dev);
+	spi_dev = spi_new_device(ctlr, &spi_info);
+	put_device(&ctlr->dev);
 	if (!spi_dev) {
 		dev_err(dev, "failed to create MTD device\n");
 		rv = -EINVAL;
-- 
2.43.0

[PATCH v3 07/32] media: netup_unidvb: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 .../media/pci/netup_unidvb/netup_unidvb_spi.c | 48 +++++++++----------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_spi.c b/drivers/media/pci/netup_unidvb/netup_unidvb_spi.c
index 526042d8afae..e90aa1c1584c 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_spi.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_spi.c
@@ -35,7 +35,7 @@ struct netup_spi_regs {
 
 struct netup_spi {
 	struct device			*dev;
-	struct spi_master		*master;
+	struct spi_controller		*ctlr;
 	struct netup_spi_regs __iomem	*regs;
 	u8 __iomem			*mmio;
 	spinlock_t			lock;
@@ -78,7 +78,7 @@ irqreturn_t netup_spi_interrupt(struct netup_spi *spi)
 	reg = readw(&spi->regs->control_stat);
 	if (!(reg & NETUP_SPI_CTRL_IRQ)) {
 		spin_unlock_irqrestore(&spi->lock, flags);
-		dev_dbg(&spi->master->dev,
+		dev_dbg(&spi->ctlr->dev,
 			"%s(): not mine interrupt\n", __func__);
 		return IRQ_NONE;
 	}
@@ -88,15 +88,15 @@ irqreturn_t netup_spi_interrupt(struct netup_spi *spi)
 	spi->state = SPI_STATE_DONE;
 	wake_up(&spi->waitq);
 	spin_unlock_irqrestore(&spi->lock, flags);
-	dev_dbg(&spi->master->dev,
+	dev_dbg(&spi->ctlr->dev,
 		"%s(): SPI interrupt handled\n", __func__);
 	return IRQ_HANDLED;
 }
 
-static int netup_spi_transfer(struct spi_master *master,
+static int netup_spi_transfer(struct spi_controller *ctlr,
 			      struct spi_message *msg)
 {
-	struct netup_spi *spi = spi_master_get_devdata(master);
+	struct netup_spi *spi = spi_controller_get_devdata(ctlr);
 	struct spi_transfer *t;
 	int result = 0;
 	u32 tr_size;
@@ -131,7 +131,7 @@ static int netup_spi_transfer(struct spi_master *master,
 				NETUP_SPI_CTRL_START |
 				(frag_last ? NETUP_SPI_CTRL_LAST_CS : 0),
 				&spi->regs->control_stat);
-			dev_dbg(&spi->master->dev,
+			dev_dbg(&spi->ctlr->dev,
 				"%s(): control_stat 0x%04x\n",
 				__func__, readw(&spi->regs->control_stat));
 			wait_event_timeout(spi->waitq,
@@ -144,11 +144,11 @@ static int netup_spi_transfer(struct spi_master *master,
 				}
 			} else {
 				if (spi->state == SPI_STATE_START) {
-					dev_dbg(&spi->master->dev,
+					dev_dbg(&spi->ctlr->dev,
 						"%s(): transfer timeout\n",
 						__func__);
 				} else {
-					dev_dbg(&spi->master->dev,
+					dev_dbg(&spi->ctlr->dev,
 						"%s(): invalid state %d\n",
 						__func__, spi->state);
 				}
@@ -161,7 +161,7 @@ static int netup_spi_transfer(struct spi_master *master,
 	}
 done:
 	msg->status = result;
-	spi_finalize_current_message(master);
+	spi_finalize_current_message(ctlr);
 	return result;
 }
 
@@ -172,30 +172,30 @@ static int netup_spi_setup(struct spi_device *spi)
 
 int netup_spi_init(struct netup_unidvb_dev *ndev)
 {
-	struct spi_master *master;
+	struct spi_controller *ctlr;
 	struct netup_spi *nspi;
 
-	master = devm_spi_alloc_master(&ndev->pci_dev->dev,
-		sizeof(struct netup_spi));
-	if (!master) {
+	ctlr = devm_spi_alloc_master(&ndev->pci_dev->dev,
+					 sizeof(struct netup_spi));
+	if (!ctlr) {
 		dev_err(&ndev->pci_dev->dev,
 			"%s(): unable to alloc SPI master\n", __func__);
 		return -EINVAL;
 	}
-	nspi = spi_master_get_devdata(master);
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
-	master->bus_num = -1;
-	master->num_chipselect = 1;
-	master->transfer_one_message = netup_spi_transfer;
-	master->setup = netup_spi_setup;
+	nspi = spi_controller_get_devdata(ctlr);
+	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
+	ctlr->bus_num = -1;
+	ctlr->num_chipselect = 1;
+	ctlr->transfer_one_message = netup_spi_transfer;
+	ctlr->setup = netup_spi_setup;
 	spin_lock_init(&nspi->lock);
 	init_waitqueue_head(&nspi->waitq);
-	nspi->master = master;
+	nspi->ctlr = ctlr;
 	nspi->regs = (struct netup_spi_regs __iomem *)(ndev->bmmio0 + 0x4000);
 	writew(2, &nspi->regs->clock_divider);
 	writew(NETUP_UNIDVB_IRQ_SPI, ndev->bmmio0 + REG_IMASK_SET);
 	ndev->spi = nspi;
-	if (spi_register_master(master)) {
+	if (spi_register_controller(ctlr)) {
 		ndev->spi = NULL;
 		dev_err(&ndev->pci_dev->dev,
 			"%s(): unable to register SPI bus\n", __func__);
@@ -207,8 +207,8 @@ int netup_spi_init(struct netup_unidvb_dev *ndev)
 		ndev->pci_bus,
 		ndev->pci_slot,
 		ndev->pci_func);
-	if (!spi_new_device(master, &netup_spi_board)) {
-		spi_unregister_master(master);
+	if (!spi_new_device(ctlr, &netup_spi_board)) {
+		spi_unregister_controller(ctlr);
 		ndev->spi = NULL;
 		dev_err(&ndev->pci_dev->dev,
 			"%s(): unable to create SPI device\n", __func__);
@@ -227,7 +227,7 @@ void netup_spi_release(struct netup_unidvb_dev *ndev)
 	if (!spi)
 		return;
 
-	spi_unregister_master(spi->master);
+	spi_unregister_controller(spi->ctlr);
 	spin_lock_irqsave(&spi->lock, flags);
 	reg = readw(&spi->regs->control_stat);
 	writew(reg | NETUP_SPI_CTRL_IRQ, &spi->regs->control_stat);
-- 
2.43.0

[PATCH v3 08/32] media: usb/msi2500: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/media/usb/msi2500/msi2500.c | 38 ++++++++++++++---------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/media/usb/msi2500/msi2500.c b/drivers/media/usb/msi2500/msi2500.c
index 9759996ee6a4..5138486abfa0 100644
--- a/drivers/media/usb/msi2500/msi2500.c
+++ b/drivers/media/usb/msi2500/msi2500.c
@@ -107,7 +107,7 @@ struct msi2500_dev {
 	struct video_device vdev;
 	struct v4l2_device v4l2_dev;
 	struct v4l2_subdev *v4l2_subdev;
-	struct spi_master *master;
+	struct spi_controller *ctlr;
 
 	/* videobuf2 queue and queued buffers list */
 	struct vb2_queue vb_queue;
@@ -574,7 +574,7 @@ static void msi2500_disconnect(struct usb_interface *intf)
 	dev->udev = NULL;
 	v4l2_device_disconnect(&dev->v4l2_dev);
 	video_unregister_device(&dev->vdev);
-	spi_unregister_master(dev->master);
+	spi_unregister_controller(dev->ctlr);
 	mutex_unlock(&dev->v4l2_lock);
 	mutex_unlock(&dev->vb_queue_lock);
 
@@ -1136,10 +1136,10 @@ static void msi2500_video_release(struct v4l2_device *v)
 	kfree(dev);
 }
 
-static int msi2500_transfer_one_message(struct spi_master *master,
+static int msi2500_transfer_one_message(struct spi_controller *ctlr,
 					struct spi_message *m)
 {
-	struct msi2500_dev *dev = spi_master_get_devdata(master);
+	struct msi2500_dev *dev = spi_controller_get_devdata(ctlr);
 	struct spi_transfer *t;
 	int ret = 0;
 	u32 data;
@@ -1154,7 +1154,7 @@ static int msi2500_transfer_one_message(struct spi_master *master,
 	}
 
 	m->status = ret;
-	spi_finalize_current_message(master);
+	spi_finalize_current_message(ctlr);
 	return ret;
 }
 
@@ -1163,7 +1163,7 @@ static int msi2500_probe(struct usb_interface *intf,
 {
 	struct msi2500_dev *dev;
 	struct v4l2_subdev *sd;
-	struct spi_master *master;
+	struct spi_controller *ctlr;
 	int ret;
 	static struct spi_board_info board_info = {
 		.modalias		= "msi001",
@@ -1220,30 +1220,30 @@ static int msi2500_probe(struct usb_interface *intf,
 	}
 
 	/* SPI master adapter */
-	master = spi_alloc_master(dev->dev, 0);
-	if (master == NULL) {
+	ctlr = spi_alloc_master(dev->dev, 0);
+	if (ctlr == NULL) {
 		ret = -ENOMEM;
 		goto err_unregister_v4l2_dev;
 	}
 
-	dev->master = master;
-	master->bus_num = -1;
-	master->num_chipselect = 1;
-	master->transfer_one_message = msi2500_transfer_one_message;
-	spi_master_set_devdata(master, dev);
-	ret = spi_register_master(master);
+	dev->ctlr = ctlr;
+	ctlr->bus_num = -1;
+	ctlr->num_chipselect = 1;
+	ctlr->transfer_one_message = msi2500_transfer_one_message;
+	spi_controller_set_devdata(ctlr, dev);
+	ret = spi_register_controller(ctlr);
 	if (ret) {
-		spi_master_put(master);
+		spi_controller_put(ctlr);
 		goto err_unregister_v4l2_dev;
 	}
 
 	/* load v4l2 subdevice */
-	sd = v4l2_spi_new_subdev(&dev->v4l2_dev, master, &board_info);
+	sd = v4l2_spi_new_subdev(&dev->v4l2_dev, ctlr, &board_info);
 	dev->v4l2_subdev = sd;
 	if (sd == NULL) {
 		dev_err(dev->dev, "cannot get v4l2 subdevice\n");
 		ret = -ENODEV;
-		goto err_unregister_master;
+		goto err_unregister_controller;
 	}
 
 	/* Register controls */
@@ -1276,8 +1276,8 @@ static int msi2500_probe(struct usb_interface *intf,
 	return 0;
 err_free_controls:
 	v4l2_ctrl_handler_free(&dev->hdl);
-err_unregister_master:
-	spi_unregister_master(dev->master);
+err_unregister_controller:
+	spi_unregister_controller(dev->ctlr);
 err_unregister_v4l2_dev:
 	v4l2_device_unregister(&dev->v4l2_dev);
 err_free_mem:
-- 
2.43.0

Re: [PATCH v3 08/32] media: usb/msi2500: Follow renaming of SPI "master" to "controller"

[Hans Verkuil]

On 07/02/2024 19:40, Uwe Kleine-König wrote:
> In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
> some functions and struct members were renamed. To not break all drivers
> compatibility macros were provided.
> 
> To be able to remove these compatibility macros push the renaming into
> this driver.
> 
> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Regards,

	Hans

> ---
>  drivers/media/usb/msi2500/msi2500.c | 38 ++++++++++++++---------------
>  1 file changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/media/usb/msi2500/msi2500.c b/drivers/media/usb/msi2500/msi2500.c
> index 9759996ee6a4..5138486abfa0 100644
> --- a/drivers/media/usb/msi2500/msi2500.c
> +++ b/drivers/media/usb/msi2500/msi2500.c
> @@ -107,7 +107,7 @@ struct msi2500_dev {
>  	struct video_device vdev;
>  	struct v4l2_device v4l2_dev;
>  	struct v4l2_subdev *v4l2_subdev;
> -	struct spi_master *master;
> +	struct spi_controller *ctlr;
>  
>  	/* videobuf2 queue and queued buffers list */
>  	struct vb2_queue vb_queue;
> @@ -574,7 +574,7 @@ static void msi2500_disconnect(struct usb_interface *intf)
>  	dev->udev = NULL;
>  	v4l2_device_disconnect(&dev->v4l2_dev);
>  	video_unregister_device(&dev->vdev);
> -	spi_unregister_master(dev->master);
> +	spi_unregister_controller(dev->ctlr);
>  	mutex_unlock(&dev->v4l2_lock);
>  	mutex_unlock(&dev->vb_queue_lock);
>  
> @@ -1136,10 +1136,10 @@ static void msi2500_video_release(struct v4l2_device *v)
>  	kfree(dev);
>  }
>  
> -static int msi2500_transfer_one_message(struct spi_master *master,
> +static int msi2500_transfer_one_message(struct spi_controller *ctlr,
>  					struct spi_message *m)
>  {
> -	struct msi2500_dev *dev = spi_master_get_devdata(master);
> +	struct msi2500_dev *dev = spi_controller_get_devdata(ctlr);
>  	struct spi_transfer *t;
>  	int ret = 0;
>  	u32 data;
> @@ -1154,7 +1154,7 @@ static int msi2500_transfer_one_message(struct spi_master *master,
>  	}
>  
>  	m->status = ret;
> -	spi_finalize_current_message(master);
> +	spi_finalize_current_message(ctlr);
>  	return ret;
>  }
>  
> @@ -1163,7 +1163,7 @@ static int msi2500_probe(struct usb_interface *intf,
>  {
>  	struct msi2500_dev *dev;
>  	struct v4l2_subdev *sd;
> -	struct spi_master *master;
> +	struct spi_controller *ctlr;
>  	int ret;
>  	static struct spi_board_info board_info = {
>  		.modalias		= "msi001",
> @@ -1220,30 +1220,30 @@ static int msi2500_probe(struct usb_interface *intf,
>  	}
>  
>  	/* SPI master adapter */
> -	master = spi_alloc_master(dev->dev, 0);
> -	if (master == NULL) {
> +	ctlr = spi_alloc_master(dev->dev, 0);
> +	if (ctlr == NULL) {
>  		ret = -ENOMEM;
>  		goto err_unregister_v4l2_dev;
>  	}
>  
> -	dev->master = master;
> -	master->bus_num = -1;
> -	master->num_chipselect = 1;
> -	master->transfer_one_message = msi2500_transfer_one_message;
> -	spi_master_set_devdata(master, dev);
> -	ret = spi_register_master(master);
> +	dev->ctlr = ctlr;
> +	ctlr->bus_num = -1;
> +	ctlr->num_chipselect = 1;
> +	ctlr->transfer_one_message = msi2500_transfer_one_message;
> +	spi_controller_set_devdata(ctlr, dev);
> +	ret = spi_register_controller(ctlr);
>  	if (ret) {
> -		spi_master_put(master);
> +		spi_controller_put(ctlr);
>  		goto err_unregister_v4l2_dev;
>  	}
>  
>  	/* load v4l2 subdevice */
> -	sd = v4l2_spi_new_subdev(&dev->v4l2_dev, master, &board_info);
> +	sd = v4l2_spi_new_subdev(&dev->v4l2_dev, ctlr, &board_info);
>  	dev->v4l2_subdev = sd;
>  	if (sd == NULL) {
>  		dev_err(dev->dev, "cannot get v4l2 subdevice\n");
>  		ret = -ENODEV;
> -		goto err_unregister_master;
> +		goto err_unregister_controller;
>  	}
>  
>  	/* Register controls */
> @@ -1276,8 +1276,8 @@ static int msi2500_probe(struct usb_interface *intf,
>  	return 0;
>  err_free_controls:
>  	v4l2_ctrl_handler_free(&dev->hdl);
> -err_unregister_master:
> -	spi_unregister_master(dev->master);
> +err_unregister_controller:
> +	spi_unregister_controller(dev->ctlr);
>  err_unregister_v4l2_dev:
>  	v4l2_device_unregister(&dev->v4l2_dev);
>  err_free_mem:

[PATCH v3 09/32] media: v4l2-subdev: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
v4l2_spi_new_subdev().

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/media/v4l2-core/v4l2-spi.c | 4 ++--
 include/media/v4l2-common.h        | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-spi.c b/drivers/media/v4l2-core/v4l2-spi.c
index eadecdff7349..a7092c3930d6 100644
--- a/drivers/media/v4l2-core/v4l2-spi.c
+++ b/drivers/media/v4l2-core/v4l2-spi.c
@@ -34,7 +34,7 @@ void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
 EXPORT_SYMBOL_GPL(v4l2_spi_subdev_init);
 
 struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
-					struct spi_master *master,
+					struct spi_controller *ctlr,
 					struct spi_board_info *info)
 {
 	struct v4l2_subdev *sd = NULL;
@@ -45,7 +45,7 @@ struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
 	if (info->modalias[0])
 		request_module(info->modalias);
 
-	spi = spi_new_device(master, info);
+	spi = spi_new_device(ctlr, info);
 
 	if (!spi || !spi->dev.driver)
 		goto error;
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index acf5be24a5ca..739b0f0fc1a0 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -278,13 +278,13 @@ static inline void v4l2_i2c_subdev_unregister(struct v4l2_subdev *sd)
  *
  *
  * @v4l2_dev: pointer to &struct v4l2_device.
- * @master: pointer to struct spi_master.
+ * @ctlr: pointer to struct spi_controller.
  * @info: pointer to struct spi_board_info.
  *
  * returns a &struct v4l2_subdev pointer.
  */
 struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
-		struct spi_master *master, struct spi_board_info *info);
+		struct spi_controller *ctlr, struct spi_board_info *info);
 
 /**
  * v4l2_spi_subdev_init - Initialize a v4l2_subdev with data from an
@@ -308,7 +308,7 @@ void v4l2_spi_subdev_unregister(struct v4l2_subdev *sd);
 
 static inline struct v4l2_subdev *
 v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
-		    struct spi_master *master, struct spi_board_info *info)
+		    struct spi_controller *ctlr, struct spi_board_info *info)
 {
 	return NULL;
 }
-- 
2.43.0

[PATCH v3 10/32] misc: gehc-achc: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/misc/gehc-achc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/gehc-achc.c b/drivers/misc/gehc-achc.c
index 4c9c5394da6f..b8fca4d393c6 100644
--- a/drivers/misc/gehc-achc.c
+++ b/drivers/misc/gehc-achc.c
@@ -65,7 +65,7 @@ static int ezport_start_programming(struct spi_device *spi, struct gpio_desc *re
 	struct spi_transfer release_cs = { };
 	int ret;
 
-	spi_bus_lock(spi->master);
+	spi_bus_lock(spi->controller);
 
 	/* assert chip select */
 	spi_message_init(&msg);
@@ -85,16 +85,16 @@ static int ezport_start_programming(struct spi_device *spi, struct gpio_desc *re
 	ret = spi_sync_locked(spi, &msg);
 
 fail:
-	spi_bus_unlock(spi->master);
+	spi_bus_unlock(spi->controller);
 	return ret;
 }
 
 static void ezport_stop_programming(struct spi_device *spi, struct gpio_desc *reset)
 {
 	/* reset without asserted chip select to return into normal mode */
-	spi_bus_lock(spi->master);
+	spi_bus_lock(spi->controller);
 	ezport_reset(reset);
-	spi_bus_unlock(spi->master);
+	spi_bus_unlock(spi->controller);
 }
 
 static int ezport_get_status_register(struct spi_device *spi)
-- 
2.43.0

[PATCH v3 11/32] mmc: mmc_spi: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/mmc/host/mmc_spi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index b8dda8160c4e..bf35761f783a 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -935,7 +935,7 @@ static void mmc_spi_request(struct mmc_host *mmc, struct mmc_request *mrq)
 #endif
 
 	/* request exclusive bus access */
-	spi_bus_lock(host->spi->master);
+	spi_bus_lock(host->spi->controller);
 
 crc_recover:
 	/* issue command; then optionally data and stop */
@@ -967,7 +967,7 @@ static void mmc_spi_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	}
 
 	/* release the bus */
-	spi_bus_unlock(host->spi->master);
+	spi_bus_unlock(host->spi->controller);
 
 	mmc_request_done(host->mmc, mrq);
 }
@@ -1157,7 +1157,7 @@ static int mmc_spi_probe(struct spi_device *spi)
 	/* We rely on full duplex transfers, mostly to reduce
 	 * per-transfer overheads (by making fewer transfers).
 	 */
-	if (spi->master->flags & SPI_CONTROLLER_HALF_DUPLEX)
+	if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX)
 		return -EINVAL;
 
 	/* MMC and SD specs only seem to care that sampling is on the
-- 
2.43.0

[PATCH v3 12/32] mtd: dataflash: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/mtd/devices/mtd_dataflash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 0c1b93303618..ec52277e3dd5 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -638,7 +638,7 @@ static int add_dataflash_otp(struct spi_device *spi, char *name, int nr_pages,
 
 	/* name must be usable with cmdlinepart */
 	sprintf(priv->name, "spi%d.%d-%s",
-			spi->master->bus_num, spi_get_chipselect(spi, 0),
+			spi->controller->bus_num, spi_get_chipselect(spi, 0),
 			name);
 
 	device = &priv->mtd;
-- 
2.43.0

[PATCH v3 12/32] mtd: dataflash: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/mtd/devices/mtd_dataflash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 0c1b93303618..ec52277e3dd5 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -638,7 +638,7 @@ static int add_dataflash_otp(struct spi_device *spi, char *name, int nr_pages,
 
 	/* name must be usable with cmdlinepart */
 	sprintf(priv->name, "spi%d.%d-%s",
-			spi->master->bus_num, spi_get_chipselect(spi, 0),
+			spi->controller->bus_num, spi_get_chipselect(spi, 0),
 			name);
 
 	device = &priv->mtd;
-- 
2.43.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 13/32] net: ks8851: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/net/ethernet/micrel/ks8851_spi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8851_spi.c b/drivers/net/ethernet/micrel/ks8851_spi.c
index 54f2eac11a63..2f803377c9f9 100644
--- a/drivers/net/ethernet/micrel/ks8851_spi.c
+++ b/drivers/net/ethernet/micrel/ks8851_spi.c
@@ -156,7 +156,7 @@ static void ks8851_rdreg(struct ks8851_net *ks, unsigned int op,
 
 	txb[0] = cpu_to_le16(op | KS_SPIOP_RD);
 
-	if (kss->spidev->master->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+	if (kss->spidev->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
 		msg = &kss->spi_msg2;
 		xfer = kss->spi_xfer2;
 
@@ -180,7 +180,7 @@ static void ks8851_rdreg(struct ks8851_net *ks, unsigned int op,
 	ret = spi_sync(kss->spidev, msg);
 	if (ret < 0)
 		netdev_err(ks->netdev, "read: spi_sync() failed\n");
-	else if (kss->spidev->master->flags & SPI_CONTROLLER_HALF_DUPLEX)
+	else if (kss->spidev->controller->flags & SPI_CONTROLLER_HALF_DUPLEX)
 		memcpy(rxb, trx, rxl);
 	else
 		memcpy(rxb, trx + 2, rxl);
-- 
2.43.0

[PATCH v3 14/32] net: vertexcom: mse102x: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/net/ethernet/vertexcom/mse102x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/vertexcom/mse102x.c b/drivers/net/ethernet/vertexcom/mse102x.c
index aeed2a093e34..edd8b59680e5 100644
--- a/drivers/net/ethernet/vertexcom/mse102x.c
+++ b/drivers/net/ethernet/vertexcom/mse102x.c
@@ -664,7 +664,7 @@ static int mse102x_probe_spi(struct spi_device *spi)
 	spi->bits_per_word = 8;
 	spi->mode |= SPI_MODE_3;
 	/* enforce minimum speed to ensure device functionality */
-	spi->master->min_speed_hz = MIN_FREQ_HZ;
+	spi->controller->min_speed_hz = MIN_FREQ_HZ;
 
 	if (!spi->max_speed_hz)
 		spi->max_speed_hz = MAX_FREQ_HZ;
-- 
2.43.0

[PATCH v3 15/32] platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/platform/chrome/cros_ec_spi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c
index 3e88cc92e819..86a3d32a7763 100644
--- a/drivers/platform/chrome/cros_ec_spi.c
+++ b/drivers/platform/chrome/cros_ec_spi.c
@@ -409,7 +409,7 @@ static int do_cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	if (!rx_buf)
 		return -ENOMEM;
 
-	spi_bus_lock(ec_spi->spi->master);
+	spi_bus_lock(ec_spi->spi->controller);
 
 	/*
 	 * Leave a gap between CS assertion and clocking of data to allow the
@@ -469,7 +469,7 @@ static int do_cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 
 	final_ret = terminate_request(ec_dev);
 
-	spi_bus_unlock(ec_spi->spi->master);
+	spi_bus_unlock(ec_spi->spi->controller);
 
 	if (!ret)
 		ret = final_ret;
@@ -554,7 +554,7 @@ static int do_cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	if (!rx_buf)
 		return -ENOMEM;
 
-	spi_bus_lock(ec_spi->spi->master);
+	spi_bus_lock(ec_spi->spi->controller);
 
 	/* Transmit phase - send our message */
 	debug_packet(ec_dev->dev, "out", ec_dev->dout, len);
@@ -590,7 +590,7 @@ static int do_cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 
 	final_ret = terminate_request(ec_dev);
 
-	spi_bus_unlock(ec_spi->spi->master);
+	spi_bus_unlock(ec_spi->spi->controller);
 
 	if (!ret)
 		ret = final_ret;
-- 
2.43.0

[PATCH v3 16/32] spi: bitbang: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
the SPI bitbang controller drivers.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-ath79.c         |  4 +--
 drivers/spi/spi-au1550.c        |  2 +-
 drivers/spi/spi-bitbang.c       | 64 ++++++++++++++++-----------------
 drivers/spi/spi-butterfly.c     |  6 ++--
 drivers/spi/spi-davinci.c       |  6 ++--
 drivers/spi/spi-gpio.c          |  2 +-
 drivers/spi/spi-lm70llp.c       |  6 ++--
 drivers/spi/spi-oc-tiny.c       |  6 ++--
 drivers/spi/spi-omap-uwire.c    |  4 +--
 drivers/spi/spi-sh-sci.c        | 10 +++---
 drivers/spi/spi-xilinx.c        |  4 +--
 drivers/spi/spi-xtensa-xtfpga.c |  2 +-
 include/linux/spi/spi_bitbang.h |  2 +-
 13 files changed, 59 insertions(+), 59 deletions(-)

diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index b7ada981464a..d78762d4db98 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -189,7 +189,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	host->num_chipselect = 3;
 	host->mem_ops = &ath79_mem_ops;
 
-	sp->bitbang.master = host;
+	sp->bitbang.ctlr = host;
 	sp->bitbang.chipselect = ath79_spi_chipselect;
 	sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
 	sp->bitbang.flags = SPI_CS_HIGH;
@@ -237,7 +237,7 @@ static void ath79_spi_remove(struct platform_device *pdev)
 
 	spi_bitbang_stop(&sp->bitbang);
 	ath79_spi_disable(sp);
-	spi_controller_put(sp->bitbang.master);
+	spi_controller_put(sp->bitbang.ctlr);
 }
 
 static void ath79_spi_shutdown(struct platform_device *pdev)
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c
index 1011b1a8f241..825d2f1cdff8 100644
--- a/drivers/spi/spi-au1550.c
+++ b/drivers/spi/spi-au1550.c
@@ -800,7 +800,7 @@ static int au1550_spi_probe(struct platform_device *pdev)
 
 	init_completion(&hw->host_done);
 
-	hw->bitbang.master = hw->host;
+	hw->bitbang.ctlr = hw->host;
 	hw->bitbang.setup_transfer = au1550_spi_setupxfer;
 	hw->bitbang.chipselect = au1550_spi_chipsel;
 	hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index ecd44016c197..a0e2204fc039 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -187,7 +187,7 @@ int spi_bitbang_setup(struct spi_device *spi)
 	bool			initial_setup = false;
 	int			retval;
 
-	bitbang = spi_master_get_devdata(spi->master);
+	bitbang = spi_controller_get_devdata(spi->controller);
 
 	if (!cs) {
 		cs = kzalloc(sizeof(*cs), GFP_KERNEL);
@@ -236,7 +236,7 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
 	unsigned		nsecs = cs->nsecs;
 	struct spi_bitbang	*bitbang;
 
-	bitbang = spi_master_get_devdata(spi->master);
+	bitbang = spi_controller_get_devdata(spi->controller);
 	if (bitbang->set_line_direction) {
 		int err;
 
@@ -268,11 +268,11 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
  * transfer-at-a-time ones to leverage dma or fifo hardware.
  */
 
-static int spi_bitbang_prepare_hardware(struct spi_master *spi)
+static int spi_bitbang_prepare_hardware(struct spi_controller *spi)
 {
 	struct spi_bitbang	*bitbang;
 
-	bitbang = spi_master_get_devdata(spi);
+	bitbang = spi_controller_get_devdata(spi);
 
 	mutex_lock(&bitbang->lock);
 	bitbang->busy = 1;
@@ -281,11 +281,11 @@ static int spi_bitbang_prepare_hardware(struct spi_master *spi)
 	return 0;
 }
 
-static int spi_bitbang_transfer_one(struct spi_master *master,
+static int spi_bitbang_transfer_one(struct spi_controller *ctlr,
 				    struct spi_device *spi,
 				    struct spi_transfer *transfer)
 {
-	struct spi_bitbang *bitbang = spi_master_get_devdata(master);
+	struct spi_bitbang *bitbang = spi_controller_get_devdata(ctlr);
 	int status = 0;
 
 	if (bitbang->setup_transfer) {
@@ -303,16 +303,16 @@ static int spi_bitbang_transfer_one(struct spi_master *master,
 		status = -EREMOTEIO;
 
 out:
-	spi_finalize_current_transfer(master);
+	spi_finalize_current_transfer(ctlr);
 
 	return status;
 }
 
-static int spi_bitbang_unprepare_hardware(struct spi_master *spi)
+static int spi_bitbang_unprepare_hardware(struct spi_controller *spi)
 {
 	struct spi_bitbang	*bitbang;
 
-	bitbang = spi_master_get_devdata(spi);
+	bitbang = spi_controller_get_devdata(spi);
 
 	mutex_lock(&bitbang->lock);
 	bitbang->busy = 0;
@@ -323,7 +323,7 @@ static int spi_bitbang_unprepare_hardware(struct spi_master *spi)
 
 static void spi_bitbang_set_cs(struct spi_device *spi, bool enable)
 {
-	struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master);
+	struct spi_bitbang *bitbang = spi_controller_get_devdata(spi->controller);
 
 	/* SPI core provides CS high / low, but bitbang driver
 	 * expects CS active
@@ -341,10 +341,10 @@ static void spi_bitbang_set_cs(struct spi_device *spi, bool enable)
 
 int spi_bitbang_init(struct spi_bitbang *bitbang)
 {
-	struct spi_master *master = bitbang->master;
+	struct spi_controller *ctlr = bitbang->ctlr;
 	bool custom_cs;
 
-	if (!master)
+	if (!ctlr)
 		return -EINVAL;
 	/*
 	 * We only need the chipselect callback if we are actually using it.
@@ -352,39 +352,39 @@ int spi_bitbang_init(struct spi_bitbang *bitbang)
 	 * SPI_CONTROLLER_GPIO_SS flag is set, we always need to call the
 	 * driver-specific chipselect routine.
 	 */
-	custom_cs = (!master->use_gpio_descriptors ||
-		     (master->flags & SPI_CONTROLLER_GPIO_SS));
+	custom_cs = (!ctlr->use_gpio_descriptors ||
+		     (ctlr->flags & SPI_CONTROLLER_GPIO_SS));
 
 	if (custom_cs && !bitbang->chipselect)
 		return -EINVAL;
 
 	mutex_init(&bitbang->lock);
 
-	if (!master->mode_bits)
-		master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+	if (!ctlr->mode_bits)
+		ctlr->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
 
-	if (master->transfer || master->transfer_one_message)
+	if (ctlr->transfer || ctlr->transfer_one_message)
 		return -EINVAL;
 
-	master->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
-	master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
-	master->transfer_one = spi_bitbang_transfer_one;
+	ctlr->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
+	ctlr->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
+	ctlr->transfer_one = spi_bitbang_transfer_one;
 	/*
 	 * When using GPIO descriptors, the ->set_cs() callback doesn't even
 	 * get called unless SPI_CONTROLLER_GPIO_SS is set.
 	 */
 	if (custom_cs)
-		master->set_cs = spi_bitbang_set_cs;
+		ctlr->set_cs = spi_bitbang_set_cs;
 
 	if (!bitbang->txrx_bufs) {
 		bitbang->use_dma = 0;
 		bitbang->txrx_bufs = spi_bitbang_bufs;
-		if (!master->setup) {
+		if (!ctlr->setup) {
 			if (!bitbang->setup_transfer)
 				bitbang->setup_transfer =
 					 spi_bitbang_setup_transfer;
-			master->setup = spi_bitbang_setup;
-			master->cleanup = spi_bitbang_cleanup;
+			ctlr->setup = spi_bitbang_setup;
+			ctlr->cleanup = spi_bitbang_cleanup;
 		}
 	}
 
@@ -411,18 +411,18 @@ EXPORT_SYMBOL_GPL(spi_bitbang_init);
  * master methods.  Those methods are the defaults if the bitbang->txrx_bufs
  * routine isn't initialized.
  *
- * This routine registers the spi_master, which will process requests in a
+ * This routine registers the spi_controller, which will process requests in a
  * dedicated task, keeping IRQs unblocked most of the time.  To stop
  * processing those requests, call spi_bitbang_stop().
  *
- * On success, this routine will take a reference to master. The caller is
- * responsible for calling spi_bitbang_stop() to decrement the reference and
- * spi_master_put() as counterpart of spi_alloc_master() to prevent a memory
+ * On success, this routine will take a reference to the controller. The caller
+ * is responsible for calling spi_bitbang_stop() to decrement the reference and
+ * spi_controller_put() as counterpart of spi_alloc_master() to prevent a memory
  * leak.
  */
 int spi_bitbang_start(struct spi_bitbang *bitbang)
 {
-	struct spi_master *master = bitbang->master;
+	struct spi_controller *ctlr = bitbang->ctlr;
 	int ret;
 
 	ret = spi_bitbang_init(bitbang);
@@ -432,9 +432,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	/* driver may get busy before register() returns, especially
 	 * if someone registered boardinfo for devices
 	 */
-	ret = spi_register_master(spi_master_get(master));
+	ret = spi_register_controller(spi_controller_get(ctlr));
 	if (ret)
-		spi_master_put(master);
+		spi_controller_put(ctlr);
 
 	return ret;
 }
@@ -445,7 +445,7 @@ EXPORT_SYMBOL_GPL(spi_bitbang_start);
  */
 void spi_bitbang_stop(struct spi_bitbang *bitbang)
 {
-	spi_unregister_master(bitbang->master);
+	spi_unregister_controller(bitbang->ctlr);
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_stop);
 
diff --git a/drivers/spi/spi-butterfly.c b/drivers/spi/spi-butterfly.c
index 289b4454242a..1d267e6c22a4 100644
--- a/drivers/spi/spi-butterfly.c
+++ b/drivers/spi/spi-butterfly.c
@@ -205,7 +205,7 @@ static void butterfly_attach(struct parport *p)
 	host->bus_num = 42;
 	host->num_chipselect = 2;
 
-	pp->bitbang.master = host;
+	pp->bitbang.ctlr = host;
 	pp->bitbang.chipselect = butterfly_chipselect;
 	pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0;
 
@@ -263,7 +263,7 @@ static void butterfly_attach(struct parport *p)
 	pp->info[0].platform_data = &flash;
 	pp->info[0].chip_select = 1;
 	pp->info[0].controller_data = pp;
-	pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]);
+	pp->dataflash = spi_new_device(pp->bitbang.ctlr, &pp->info[0]);
 	if (pp->dataflash)
 		pr_debug("%s: dataflash at %s\n", p->name,
 			 dev_name(&pp->dataflash->dev));
@@ -308,7 +308,7 @@ static void butterfly_detach(struct parport *p)
 	parport_release(pp->pd);
 	parport_unregister_device(pp->pd);
 
-	spi_controller_put(pp->bitbang.master);
+	spi_controller_put(pp->bitbang.ctlr);
 }
 
 static struct parport_driver butterfly_driver = {
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 5688be245c68..be3998104bfb 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -459,7 +459,7 @@ static bool davinci_spi_can_dma(struct spi_controller *host,
 
 static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
 {
-	struct device *sdev = dspi->bitbang.master->dev.parent;
+	struct device *sdev = dspi->bitbang.ctlr->dev.parent;
 
 	if (int_status & SPIFLG_TIMEOUT_MASK) {
 		dev_err(sdev, "SPI Time-out Error\n");
@@ -742,7 +742,7 @@ static irqreturn_t davinci_spi_irq(s32 irq, void *data)
 
 static int davinci_spi_request_dma(struct davinci_spi *dspi)
 {
-	struct device *sdev = dspi->bitbang.master->dev.parent;
+	struct device *sdev = dspi->bitbang.ctlr->dev.parent;
 
 	dspi->dma_rx = dma_request_chan(sdev, "rx");
 	if (IS_ERR(dspi->dma_rx))
@@ -913,7 +913,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_host;
 
-	dspi->bitbang.master = host;
+	dspi->bitbang.ctlr = host;
 
 	dspi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(dspi->clk)) {
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index d8db4564b406..909cce109bba 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -427,7 +427,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
 	host->cleanup = spi_gpio_cleanup;
 
 	bb = &spi_gpio->bitbang;
-	bb->master = host;
+	bb->ctlr = host;
 	/*
 	 * There is some additional business, apart from driving the CS GPIO
 	 * line, that we need to do on selection. This makes the local
diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c
index e6a65b5c8c31..f982bdebd028 100644
--- a/drivers/spi/spi-lm70llp.c
+++ b/drivers/spi/spi-lm70llp.c
@@ -212,7 +212,7 @@ static void spi_lm70llp_attach(struct parport *p)
 	/*
 	 * SPI and bitbang hookup.
 	 */
-	pp->bitbang.master = host;
+	pp->bitbang.ctlr = host;
 	pp->bitbang.chipselect = lm70_chipselect;
 	pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx;
 	pp->bitbang.flags = SPI_3WIRE;
@@ -264,7 +264,7 @@ static void spi_lm70llp_attach(struct parport *p)
 	 * the board info's (void *)controller_data.
 	 */
 	pp->info.controller_data = pp;
-	pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info);
+	pp->spidev_lm70 = spi_new_device(pp->bitbang.ctlr, &pp->info);
 	if (pp->spidev_lm70)
 		dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n",
 			dev_name(&pp->spidev_lm70->dev));
@@ -309,7 +309,7 @@ static void spi_lm70llp_detach(struct parport *p)
 	parport_release(pp->pd);
 	parport_unregister_device(pp->pd);
 
-	spi_controller_put(pp->bitbang.master);
+	spi_controller_put(pp->bitbang.ctlr);
 
 	lm70llp = NULL;
 }
diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c
index cf7c111088a6..6ea38f5e7d64 100644
--- a/drivers/spi/spi-oc-tiny.c
+++ b/drivers/spi/spi-oc-tiny.c
@@ -194,7 +194,7 @@ static int tiny_spi_of_probe(struct platform_device *pdev)
 
 	if (!np)
 		return 0;
-	hw->bitbang.master->dev.of_node = pdev->dev.of_node;
+	hw->bitbang.ctlr->dev.of_node = pdev->dev.of_node;
 	if (!of_property_read_u32(np, "clock-frequency", &val))
 		hw->freq = val;
 	if (!of_property_read_u32(np, "baud-width", &val))
@@ -229,7 +229,7 @@ static int tiny_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, hw);
 
 	/* setup the state for the bitbang driver */
-	hw->bitbang.master = host;
+	hw->bitbang.ctlr = host;
 	hw->bitbang.setup_transfer = tiny_spi_setup_transfer;
 	hw->bitbang.txrx_bufs = tiny_spi_txrx_bufs;
 
@@ -274,7 +274,7 @@ static int tiny_spi_probe(struct platform_device *pdev)
 static void tiny_spi_remove(struct platform_device *pdev)
 {
 	struct tiny_spi *hw = platform_get_drvdata(pdev);
-	struct spi_controller *host = hw->bitbang.master;
+	struct spi_controller *host = hw->bitbang.ctlr;
 
 	spi_bitbang_stop(&hw->bitbang);
 	spi_controller_put(host);
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 2dd1c1bcf4bf..210a98d903fa 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -448,7 +448,7 @@ static void uwire_off(struct uwire_spi *uwire)
 {
 	uwire_write_reg(UWIRE_SR3, 0);
 	clk_disable_unprepare(uwire->ck);
-	spi_controller_put(uwire->bitbang.master);
+	spi_controller_put(uwire->bitbang.ctlr);
 }
 
 static int uwire_probe(struct platform_device *pdev)
@@ -493,7 +493,7 @@ static int uwire_probe(struct platform_device *pdev)
 	host->setup = uwire_setup;
 	host->cleanup = uwire_cleanup;
 
-	uwire->bitbang.master = host;
+	uwire->bitbang.ctlr = host;
 	uwire->bitbang.chipselect = uwire_chipselect;
 	uwire->bitbang.setup_transfer = uwire_setup_transfer;
 	uwire->bitbang.txrx_bufs = uwire_txrx;
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
index 148d615d2f38..3d560b154ad3 100644
--- a/drivers/spi/spi-sh-sci.c
+++ b/drivers/spi/spi-sh-sci.c
@@ -136,9 +136,9 @@ static int sh_sci_spi_probe(struct platform_device *dev)
 	}
 
 	/* setup spi bitbang adaptor */
-	sp->bitbang.master = host;
-	sp->bitbang.master->bus_num = sp->info->bus_num;
-	sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
+	sp->bitbang.ctlr = host;
+	sp->bitbang.ctlr->bus_num = sp->info->bus_num;
+	sp->bitbang.ctlr->num_chipselect = sp->info->num_chipselect;
 	sp->bitbang.chipselect = sh_sci_spi_chipselect;
 
 	sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0;
@@ -166,7 +166,7 @@ static int sh_sci_spi_probe(struct platform_device *dev)
 	setbits(sp, PIN_INIT, 0);
 	iounmap(sp->membase);
  err1:
-	spi_controller_put(sp->bitbang.master);
+	spi_controller_put(sp->bitbang.ctlr);
  err0:
 	return ret;
 }
@@ -178,7 +178,7 @@ static void sh_sci_spi_remove(struct platform_device *dev)
 	spi_bitbang_stop(&sp->bitbang);
 	setbits(sp, PIN_INIT, 0);
 	iounmap(sp->membase);
-	spi_controller_put(sp->bitbang.master);
+	spi_controller_put(sp->bitbang.ctlr);
 }
 
 static struct platform_driver sh_sci_spi_drv = {
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 12355957be97..7795328427a6 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -434,7 +434,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 
 	xspi = spi_controller_get_devdata(host);
 	xspi->cs_inactive = 0xffffffff;
-	xspi->bitbang.master = host;
+	xspi->bitbang.ctlr = host;
 	xspi->bitbang.chipselect = xilinx_spi_chipselect;
 	xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
 	xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
@@ -516,7 +516,7 @@ static void xilinx_spi_remove(struct platform_device *pdev)
 	/* Disable the global IPIF interrupt */
 	xspi->write_fn(0, regs_base + XIPIF_V123B_DGIER_OFFSET);
 
-	spi_controller_put(xspi->bitbang.master);
+	spi_controller_put(xspi->bitbang.ctlr);
 }
 
 /* work with hotplug and coldplug */
diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c
index 3c7721894376..3c2cda315397 100644
--- a/drivers/spi/spi-xtensa-xtfpga.c
+++ b/drivers/spi/spi-xtensa-xtfpga.c
@@ -93,7 +93,7 @@ static int xtfpga_spi_probe(struct platform_device *pdev)
 	host->dev.of_node = pdev->dev.of_node;
 
 	xspi = spi_controller_get_devdata(host);
-	xspi->bitbang.master = host;
+	xspi->bitbang.ctlr = host;
 	xspi->bitbang.chipselect = xtfpga_spi_chipselect;
 	xspi->bitbang.txrx_word[SPI_MODE_0] = xtfpga_spi_txrx_word;
 	xspi->regs = devm_platform_ioremap_resource(pdev, 0);
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index 4444c2a992cb..b930eca2ef7b 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -10,7 +10,7 @@ struct spi_bitbang {
 	u8			use_dma;
 	u16			flags;		/* extra spi->mode support */
 
-	struct spi_master	*master;
+	struct spi_controller	*ctlr;
 
 	/* setup_transfer() changes clock and/or wordsize to match settings
 	 * for this transfer; zeroes restore defaults from spi_device.
-- 
2.43.0

[PATCH v3 16/32] spi: bitbang: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
the SPI bitbang controller drivers.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-ath79.c         |  4 +--
 drivers/spi/spi-au1550.c        |  2 +-
 drivers/spi/spi-bitbang.c       | 64 ++++++++++++++++-----------------
 drivers/spi/spi-butterfly.c     |  6 ++--
 drivers/spi/spi-davinci.c       |  6 ++--
 drivers/spi/spi-gpio.c          |  2 +-
 drivers/spi/spi-lm70llp.c       |  6 ++--
 drivers/spi/spi-oc-tiny.c       |  6 ++--
 drivers/spi/spi-omap-uwire.c    |  4 +--
 drivers/spi/spi-sh-sci.c        | 10 +++---
 drivers/spi/spi-xilinx.c        |  4 +--
 drivers/spi/spi-xtensa-xtfpga.c |  2 +-
 include/linux/spi/spi_bitbang.h |  2 +-
 13 files changed, 59 insertions(+), 59 deletions(-)

diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index b7ada981464a..d78762d4db98 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -189,7 +189,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	host->num_chipselect = 3;
 	host->mem_ops = &ath79_mem_ops;
 
-	sp->bitbang.master = host;
+	sp->bitbang.ctlr = host;
 	sp->bitbang.chipselect = ath79_spi_chipselect;
 	sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
 	sp->bitbang.flags = SPI_CS_HIGH;
@@ -237,7 +237,7 @@ static void ath79_spi_remove(struct platform_device *pdev)
 
 	spi_bitbang_stop(&sp->bitbang);
 	ath79_spi_disable(sp);
-	spi_controller_put(sp->bitbang.master);
+	spi_controller_put(sp->bitbang.ctlr);
 }
 
 static void ath79_spi_shutdown(struct platform_device *pdev)
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c
index 1011b1a8f241..825d2f1cdff8 100644
--- a/drivers/spi/spi-au1550.c
+++ b/drivers/spi/spi-au1550.c
@@ -800,7 +800,7 @@ static int au1550_spi_probe(struct platform_device *pdev)
 
 	init_completion(&hw->host_done);
 
-	hw->bitbang.master = hw->host;
+	hw->bitbang.ctlr = hw->host;
 	hw->bitbang.setup_transfer = au1550_spi_setupxfer;
 	hw->bitbang.chipselect = au1550_spi_chipsel;
 	hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index ecd44016c197..a0e2204fc039 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -187,7 +187,7 @@ int spi_bitbang_setup(struct spi_device *spi)
 	bool			initial_setup = false;
 	int			retval;
 
-	bitbang = spi_master_get_devdata(spi->master);
+	bitbang = spi_controller_get_devdata(spi->controller);
 
 	if (!cs) {
 		cs = kzalloc(sizeof(*cs), GFP_KERNEL);
@@ -236,7 +236,7 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
 	unsigned		nsecs = cs->nsecs;
 	struct spi_bitbang	*bitbang;
 
-	bitbang = spi_master_get_devdata(spi->master);
+	bitbang = spi_controller_get_devdata(spi->controller);
 	if (bitbang->set_line_direction) {
 		int err;
 
@@ -268,11 +268,11 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
  * transfer-at-a-time ones to leverage dma or fifo hardware.
  */
 
-static int spi_bitbang_prepare_hardware(struct spi_master *spi)
+static int spi_bitbang_prepare_hardware(struct spi_controller *spi)
 {
 	struct spi_bitbang	*bitbang;
 
-	bitbang = spi_master_get_devdata(spi);
+	bitbang = spi_controller_get_devdata(spi);
 
 	mutex_lock(&bitbang->lock);
 	bitbang->busy = 1;
@@ -281,11 +281,11 @@ static int spi_bitbang_prepare_hardware(struct spi_master *spi)
 	return 0;
 }
 
-static int spi_bitbang_transfer_one(struct spi_master *master,
+static int spi_bitbang_transfer_one(struct spi_controller *ctlr,
 				    struct spi_device *spi,
 				    struct spi_transfer *transfer)
 {
-	struct spi_bitbang *bitbang = spi_master_get_devdata(master);
+	struct spi_bitbang *bitbang = spi_controller_get_devdata(ctlr);
 	int status = 0;
 
 	if (bitbang->setup_transfer) {
@@ -303,16 +303,16 @@ static int spi_bitbang_transfer_one(struct spi_master *master,
 		status = -EREMOTEIO;
 
 out:
-	spi_finalize_current_transfer(master);
+	spi_finalize_current_transfer(ctlr);
 
 	return status;
 }
 
-static int spi_bitbang_unprepare_hardware(struct spi_master *spi)
+static int spi_bitbang_unprepare_hardware(struct spi_controller *spi)
 {
 	struct spi_bitbang	*bitbang;
 
-	bitbang = spi_master_get_devdata(spi);
+	bitbang = spi_controller_get_devdata(spi);
 
 	mutex_lock(&bitbang->lock);
 	bitbang->busy = 0;
@@ -323,7 +323,7 @@ static int spi_bitbang_unprepare_hardware(struct spi_master *spi)
 
 static void spi_bitbang_set_cs(struct spi_device *spi, bool enable)
 {
-	struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master);
+	struct spi_bitbang *bitbang = spi_controller_get_devdata(spi->controller);
 
 	/* SPI core provides CS high / low, but bitbang driver
 	 * expects CS active
@@ -341,10 +341,10 @@ static void spi_bitbang_set_cs(struct spi_device *spi, bool enable)
 
 int spi_bitbang_init(struct spi_bitbang *bitbang)
 {
-	struct spi_master *master = bitbang->master;
+	struct spi_controller *ctlr = bitbang->ctlr;
 	bool custom_cs;
 
-	if (!master)
+	if (!ctlr)
 		return -EINVAL;
 	/*
 	 * We only need the chipselect callback if we are actually using it.
@@ -352,39 +352,39 @@ int spi_bitbang_init(struct spi_bitbang *bitbang)
 	 * SPI_CONTROLLER_GPIO_SS flag is set, we always need to call the
 	 * driver-specific chipselect routine.
 	 */
-	custom_cs = (!master->use_gpio_descriptors ||
-		     (master->flags & SPI_CONTROLLER_GPIO_SS));
+	custom_cs = (!ctlr->use_gpio_descriptors ||
+		     (ctlr->flags & SPI_CONTROLLER_GPIO_SS));
 
 	if (custom_cs && !bitbang->chipselect)
 		return -EINVAL;
 
 	mutex_init(&bitbang->lock);
 
-	if (!master->mode_bits)
-		master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+	if (!ctlr->mode_bits)
+		ctlr->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
 
-	if (master->transfer || master->transfer_one_message)
+	if (ctlr->transfer || ctlr->transfer_one_message)
 		return -EINVAL;
 
-	master->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
-	master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
-	master->transfer_one = spi_bitbang_transfer_one;
+	ctlr->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
+	ctlr->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
+	ctlr->transfer_one = spi_bitbang_transfer_one;
 	/*
 	 * When using GPIO descriptors, the ->set_cs() callback doesn't even
 	 * get called unless SPI_CONTROLLER_GPIO_SS is set.
 	 */
 	if (custom_cs)
-		master->set_cs = spi_bitbang_set_cs;
+		ctlr->set_cs = spi_bitbang_set_cs;
 
 	if (!bitbang->txrx_bufs) {
 		bitbang->use_dma = 0;
 		bitbang->txrx_bufs = spi_bitbang_bufs;
-		if (!master->setup) {
+		if (!ctlr->setup) {
 			if (!bitbang->setup_transfer)
 				bitbang->setup_transfer =
 					 spi_bitbang_setup_transfer;
-			master->setup = spi_bitbang_setup;
-			master->cleanup = spi_bitbang_cleanup;
+			ctlr->setup = spi_bitbang_setup;
+			ctlr->cleanup = spi_bitbang_cleanup;
 		}
 	}
 
@@ -411,18 +411,18 @@ EXPORT_SYMBOL_GPL(spi_bitbang_init);
  * master methods.  Those methods are the defaults if the bitbang->txrx_bufs
  * routine isn't initialized.
  *
- * This routine registers the spi_master, which will process requests in a
+ * This routine registers the spi_controller, which will process requests in a
  * dedicated task, keeping IRQs unblocked most of the time.  To stop
  * processing those requests, call spi_bitbang_stop().
  *
- * On success, this routine will take a reference to master. The caller is
- * responsible for calling spi_bitbang_stop() to decrement the reference and
- * spi_master_put() as counterpart of spi_alloc_master() to prevent a memory
+ * On success, this routine will take a reference to the controller. The caller
+ * is responsible for calling spi_bitbang_stop() to decrement the reference and
+ * spi_controller_put() as counterpart of spi_alloc_master() to prevent a memory
  * leak.
  */
 int spi_bitbang_start(struct spi_bitbang *bitbang)
 {
-	struct spi_master *master = bitbang->master;
+	struct spi_controller *ctlr = bitbang->ctlr;
 	int ret;
 
 	ret = spi_bitbang_init(bitbang);
@@ -432,9 +432,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	/* driver may get busy before register() returns, especially
 	 * if someone registered boardinfo for devices
 	 */
-	ret = spi_register_master(spi_master_get(master));
+	ret = spi_register_controller(spi_controller_get(ctlr));
 	if (ret)
-		spi_master_put(master);
+		spi_controller_put(ctlr);
 
 	return ret;
 }
@@ -445,7 +445,7 @@ EXPORT_SYMBOL_GPL(spi_bitbang_start);
  */
 void spi_bitbang_stop(struct spi_bitbang *bitbang)
 {
-	spi_unregister_master(bitbang->master);
+	spi_unregister_controller(bitbang->ctlr);
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_stop);
 
diff --git a/drivers/spi/spi-butterfly.c b/drivers/spi/spi-butterfly.c
index 289b4454242a..1d267e6c22a4 100644
--- a/drivers/spi/spi-butterfly.c
+++ b/drivers/spi/spi-butterfly.c
@@ -205,7 +205,7 @@ static void butterfly_attach(struct parport *p)
 	host->bus_num = 42;
 	host->num_chipselect = 2;
 
-	pp->bitbang.master = host;
+	pp->bitbang.ctlr = host;
 	pp->bitbang.chipselect = butterfly_chipselect;
 	pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0;
 
@@ -263,7 +263,7 @@ static void butterfly_attach(struct parport *p)
 	pp->info[0].platform_data = &flash;
 	pp->info[0].chip_select = 1;
 	pp->info[0].controller_data = pp;
-	pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]);
+	pp->dataflash = spi_new_device(pp->bitbang.ctlr, &pp->info[0]);
 	if (pp->dataflash)
 		pr_debug("%s: dataflash at %s\n", p->name,
 			 dev_name(&pp->dataflash->dev));
@@ -308,7 +308,7 @@ static void butterfly_detach(struct parport *p)
 	parport_release(pp->pd);
 	parport_unregister_device(pp->pd);
 
-	spi_controller_put(pp->bitbang.master);
+	spi_controller_put(pp->bitbang.ctlr);
 }
 
 static struct parport_driver butterfly_driver = {
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 5688be245c68..be3998104bfb 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -459,7 +459,7 @@ static bool davinci_spi_can_dma(struct spi_controller *host,
 
 static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
 {
-	struct device *sdev = dspi->bitbang.master->dev.parent;
+	struct device *sdev = dspi->bitbang.ctlr->dev.parent;
 
 	if (int_status & SPIFLG_TIMEOUT_MASK) {
 		dev_err(sdev, "SPI Time-out Error\n");
@@ -742,7 +742,7 @@ static irqreturn_t davinci_spi_irq(s32 irq, void *data)
 
 static int davinci_spi_request_dma(struct davinci_spi *dspi)
 {
-	struct device *sdev = dspi->bitbang.master->dev.parent;
+	struct device *sdev = dspi->bitbang.ctlr->dev.parent;
 
 	dspi->dma_rx = dma_request_chan(sdev, "rx");
 	if (IS_ERR(dspi->dma_rx))
@@ -913,7 +913,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_host;
 
-	dspi->bitbang.master = host;
+	dspi->bitbang.ctlr = host;
 
 	dspi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(dspi->clk)) {
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index d8db4564b406..909cce109bba 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -427,7 +427,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
 	host->cleanup = spi_gpio_cleanup;
 
 	bb = &spi_gpio->bitbang;
-	bb->master = host;
+	bb->ctlr = host;
 	/*
 	 * There is some additional business, apart from driving the CS GPIO
 	 * line, that we need to do on selection. This makes the local
diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c
index e6a65b5c8c31..f982bdebd028 100644
--- a/drivers/spi/spi-lm70llp.c
+++ b/drivers/spi/spi-lm70llp.c
@@ -212,7 +212,7 @@ static void spi_lm70llp_attach(struct parport *p)
 	/*
 	 * SPI and bitbang hookup.
 	 */
-	pp->bitbang.master = host;
+	pp->bitbang.ctlr = host;
 	pp->bitbang.chipselect = lm70_chipselect;
 	pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx;
 	pp->bitbang.flags = SPI_3WIRE;
@@ -264,7 +264,7 @@ static void spi_lm70llp_attach(struct parport *p)
 	 * the board info's (void *)controller_data.
 	 */
 	pp->info.controller_data = pp;
-	pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info);
+	pp->spidev_lm70 = spi_new_device(pp->bitbang.ctlr, &pp->info);
 	if (pp->spidev_lm70)
 		dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n",
 			dev_name(&pp->spidev_lm70->dev));
@@ -309,7 +309,7 @@ static void spi_lm70llp_detach(struct parport *p)
 	parport_release(pp->pd);
 	parport_unregister_device(pp->pd);
 
-	spi_controller_put(pp->bitbang.master);
+	spi_controller_put(pp->bitbang.ctlr);
 
 	lm70llp = NULL;
 }
diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c
index cf7c111088a6..6ea38f5e7d64 100644
--- a/drivers/spi/spi-oc-tiny.c
+++ b/drivers/spi/spi-oc-tiny.c
@@ -194,7 +194,7 @@ static int tiny_spi_of_probe(struct platform_device *pdev)
 
 	if (!np)
 		return 0;
-	hw->bitbang.master->dev.of_node = pdev->dev.of_node;
+	hw->bitbang.ctlr->dev.of_node = pdev->dev.of_node;
 	if (!of_property_read_u32(np, "clock-frequency", &val))
 		hw->freq = val;
 	if (!of_property_read_u32(np, "baud-width", &val))
@@ -229,7 +229,7 @@ static int tiny_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, hw);
 
 	/* setup the state for the bitbang driver */
-	hw->bitbang.master = host;
+	hw->bitbang.ctlr = host;
 	hw->bitbang.setup_transfer = tiny_spi_setup_transfer;
 	hw->bitbang.txrx_bufs = tiny_spi_txrx_bufs;
 
@@ -274,7 +274,7 @@ static int tiny_spi_probe(struct platform_device *pdev)
 static void tiny_spi_remove(struct platform_device *pdev)
 {
 	struct tiny_spi *hw = platform_get_drvdata(pdev);
-	struct spi_controller *host = hw->bitbang.master;
+	struct spi_controller *host = hw->bitbang.ctlr;
 
 	spi_bitbang_stop(&hw->bitbang);
 	spi_controller_put(host);
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 2dd1c1bcf4bf..210a98d903fa 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -448,7 +448,7 @@ static void uwire_off(struct uwire_spi *uwire)
 {
 	uwire_write_reg(UWIRE_SR3, 0);
 	clk_disable_unprepare(uwire->ck);
-	spi_controller_put(uwire->bitbang.master);
+	spi_controller_put(uwire->bitbang.ctlr);
 }
 
 static int uwire_probe(struct platform_device *pdev)
@@ -493,7 +493,7 @@ static int uwire_probe(struct platform_device *pdev)
 	host->setup = uwire_setup;
 	host->cleanup = uwire_cleanup;
 
-	uwire->bitbang.master = host;
+	uwire->bitbang.ctlr = host;
 	uwire->bitbang.chipselect = uwire_chipselect;
 	uwire->bitbang.setup_transfer = uwire_setup_transfer;
 	uwire->bitbang.txrx_bufs = uwire_txrx;
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
index 148d615d2f38..3d560b154ad3 100644
--- a/drivers/spi/spi-sh-sci.c
+++ b/drivers/spi/spi-sh-sci.c
@@ -136,9 +136,9 @@ static int sh_sci_spi_probe(struct platform_device *dev)
 	}
 
 	/* setup spi bitbang adaptor */
-	sp->bitbang.master = host;
-	sp->bitbang.master->bus_num = sp->info->bus_num;
-	sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
+	sp->bitbang.ctlr = host;
+	sp->bitbang.ctlr->bus_num = sp->info->bus_num;
+	sp->bitbang.ctlr->num_chipselect = sp->info->num_chipselect;
 	sp->bitbang.chipselect = sh_sci_spi_chipselect;
 
 	sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0;
@@ -166,7 +166,7 @@ static int sh_sci_spi_probe(struct platform_device *dev)
 	setbits(sp, PIN_INIT, 0);
 	iounmap(sp->membase);
  err1:
-	spi_controller_put(sp->bitbang.master);
+	spi_controller_put(sp->bitbang.ctlr);
  err0:
 	return ret;
 }
@@ -178,7 +178,7 @@ static void sh_sci_spi_remove(struct platform_device *dev)
 	spi_bitbang_stop(&sp->bitbang);
 	setbits(sp, PIN_INIT, 0);
 	iounmap(sp->membase);
-	spi_controller_put(sp->bitbang.master);
+	spi_controller_put(sp->bitbang.ctlr);
 }
 
 static struct platform_driver sh_sci_spi_drv = {
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 12355957be97..7795328427a6 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -434,7 +434,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 
 	xspi = spi_controller_get_devdata(host);
 	xspi->cs_inactive = 0xffffffff;
-	xspi->bitbang.master = host;
+	xspi->bitbang.ctlr = host;
 	xspi->bitbang.chipselect = xilinx_spi_chipselect;
 	xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
 	xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
@@ -516,7 +516,7 @@ static void xilinx_spi_remove(struct platform_device *pdev)
 	/* Disable the global IPIF interrupt */
 	xspi->write_fn(0, regs_base + XIPIF_V123B_DGIER_OFFSET);
 
-	spi_controller_put(xspi->bitbang.master);
+	spi_controller_put(xspi->bitbang.ctlr);
 }
 
 /* work with hotplug and coldplug */
diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c
index 3c7721894376..3c2cda315397 100644
--- a/drivers/spi/spi-xtensa-xtfpga.c
+++ b/drivers/spi/spi-xtensa-xtfpga.c
@@ -93,7 +93,7 @@ static int xtfpga_spi_probe(struct platform_device *pdev)
 	host->dev.of_node = pdev->dev.of_node;
 
 	xspi = spi_controller_get_devdata(host);
-	xspi->bitbang.master = host;
+	xspi->bitbang.ctlr = host;
 	xspi->bitbang.chipselect = xtfpga_spi_chipselect;
 	xspi->bitbang.txrx_word[SPI_MODE_0] = xtfpga_spi_txrx_word;
 	xspi->regs = devm_platform_ioremap_resource(pdev, 0);
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index 4444c2a992cb..b930eca2ef7b 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -10,7 +10,7 @@ struct spi_bitbang {
 	u8			use_dma;
 	u16			flags;		/* extra spi->mode support */
 
-	struct spi_master	*master;
+	struct spi_controller	*ctlr;
 
 	/* setup_transfer() changes clock and/or wordsize to match settings
 	 * for this transfer; zeroes restore defaults from spi_device.
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 17/32] spi: cadence-quadspi: Don't emit error message on allocation error

[Uwe Kleine-König]

Drivers are not supposed to emit an error message when a memory
allocation fails, as the kernel is very loud in this case already
anyhow.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-cadence-quadspi.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index f94e0d370d46..eb6cc861b00b 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1712,10 +1712,9 @@ static int cqspi_probe(struct platform_device *pdev)
 	int irq;
 
 	host = devm_spi_alloc_host(&pdev->dev, sizeof(*cqspi));
-	if (!host) {
-		dev_err(&pdev->dev, "devm_spi_alloc_host failed\n");
+	if (!host)
 		return -ENOMEM;
-	}
+
 	host->mode_bits = SPI_RX_QUAD | SPI_RX_DUAL;
 	host->mem_ops = &cqspi_mem_ops;
 	host->mem_caps = &cqspi_mem_caps;
-- 
2.43.0

[PATCH v3 18/32] spi: cadence-quadspi: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-cadence-quadspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index eb6cc861b00b..a5e2f7786b76 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1410,7 +1410,7 @@ static int cqspi_mem_process(struct spi_mem *mem, const struct spi_mem_op *op)
 static int cqspi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
 {
 	int ret;
-	struct cqspi_st *cqspi = spi_master_get_devdata(mem->spi->master);
+	struct cqspi_st *cqspi = spi_controller_get_devdata(mem->spi->controller);
 	struct device *dev = &cqspi->pdev->dev;
 
 	ret = pm_runtime_resume_and_get(dev);
-- 
2.43.0

[PATCH v3 19/32] spi: cavium: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-cavium.c | 6 +++---
 drivers/spi/spi-cavium.h | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-cavium.c b/drivers/spi/spi-cavium.c
index dfe224defd6e..26b8cd1c76e1 100644
--- a/drivers/spi/spi-cavium.c
+++ b/drivers/spi/spi-cavium.c
@@ -124,10 +124,10 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
 	return xfer->len;
 }
 
-int octeon_spi_transfer_one_message(struct spi_master *master,
+int octeon_spi_transfer_one_message(struct spi_controller *ctlr,
 				    struct spi_message *msg)
 {
-	struct octeon_spi *p = spi_master_get_devdata(master);
+	struct octeon_spi *p = spi_controller_get_devdata(ctlr);
 	unsigned int total_len = 0;
 	int status = 0;
 	struct spi_transfer *xfer;
@@ -145,6 +145,6 @@ int octeon_spi_transfer_one_message(struct spi_master *master,
 err:
 	msg->status = status;
 	msg->actual_length = total_len;
-	spi_finalize_current_message(master);
+	spi_finalize_current_message(ctlr);
 	return status;
 }
diff --git a/drivers/spi/spi-cavium.h b/drivers/spi/spi-cavium.h
index 1f3ac463a20b..af53a0c31476 100644
--- a/drivers/spi/spi-cavium.h
+++ b/drivers/spi/spi-cavium.h
@@ -28,7 +28,7 @@ struct octeon_spi {
 #define OCTEON_SPI_TX(x)	(x->regs.tx)
 #define OCTEON_SPI_DAT0(x)	(x->regs.data)
 
-int octeon_spi_transfer_one_message(struct spi_master *master,
+int octeon_spi_transfer_one_message(struct spi_controller *ctlr,
 				    struct spi_message *msg);
 
 /* MPI register descriptions */
-- 
2.43.0

[PATCH v3 20/32] spi: geni-qcom: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver. This was already tried before in commit 8726bdcef62e ("spi:
geni-qcom: switch to use modern name"), that's why this change is so
small.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-geni-qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index 15f84e68d4d2..37ef8c40b276 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -647,7 +647,7 @@ static void spi_geni_release_dma_chan(struct spi_geni_master *mas)
 
 static int spi_geni_init(struct spi_geni_master *mas)
 {
-	struct spi_master *spi = dev_get_drvdata(mas->dev);
+	struct spi_controller *spi = dev_get_drvdata(mas->dev);
 	struct geni_se *se = &mas->se;
 	unsigned int proto, major, minor, ver;
 	u32 spi_tx_cfg, fifo_disable;
-- 
2.43.0

[PATCH v3 21/32] spi: loopback-test: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-loopback-test.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index bbf2015d8e5c..fee8893d2751 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -1031,8 +1031,8 @@ int spi_test_run_test(struct spi_device *spi, const struct spi_test *test,
 #define FOR_EACH_ALIGNMENT(var)						\
 	for (var = 0;							\
 	    var < (test->iterate_##var ?				\
-			(spi->master->dma_alignment ?			\
-			 spi->master->dma_alignment :			\
+			(spi->controller->dma_alignment ?		\
+			 spi->controller->dma_alignment :		\
 			 test->iterate_##var) :				\
 			1);						\
 	    var++)
-- 
2.43.0

[PATCH v3 22/32] spi: slave-mt27xx: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-slave-mt27xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c
index 6d6772974783..f1ddf4c099a3 100644
--- a/drivers/spi/spi-slave-mt27xx.c
+++ b/drivers/spi/spi-slave-mt27xx.c
@@ -297,7 +297,7 @@ static int mtk_spi_slave_transfer_one(struct spi_controller *ctlr,
 
 static int mtk_spi_slave_setup(struct spi_device *spi)
 {
-	struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->master);
+	struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->controller);
 	u32 reg_val;
 
 	reg_val = DMA_DONE_EN | DATA_DONE_EN |
-- 
2.43.0

[PATCH v3 22/32] spi: slave-mt27xx: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-slave-mt27xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c
index 6d6772974783..f1ddf4c099a3 100644
--- a/drivers/spi/spi-slave-mt27xx.c
+++ b/drivers/spi/spi-slave-mt27xx.c
@@ -297,7 +297,7 @@ static int mtk_spi_slave_transfer_one(struct spi_controller *ctlr,
 
 static int mtk_spi_slave_setup(struct spi_device *spi)
 {
-	struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->master);
+	struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->controller);
 	u32 reg_val;
 
 	reg_val = DMA_DONE_EN | DATA_DONE_EN |
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 23/32] spi: spidev: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spidev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 655f2c959cd4..95fb5f1c91c1 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -802,7 +802,7 @@ static int spidev_probe(struct spi_device *spi)
 		spidev->devt = MKDEV(SPIDEV_MAJOR, minor);
 		dev = device_create(&spidev_class, &spi->dev, spidev->devt,
 				    spidev, "spidev%d.%d",
-				    spi->master->bus_num, spi_get_chipselect(spi, 0));
+				    spi->controller->bus_num, spi_get_chipselect(spi, 0));
 		status = PTR_ERR_OR_ZERO(dev);
 	} else {
 		dev_dbg(&spi->dev, "no minor number available!\n");
-- 
2.43.0

[PATCH v3 24/32] staging: fbtft: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/staging/fbtft/fbtft-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 3626f429b002..68add4d598ae 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -794,7 +794,7 @@ int fbtft_register_framebuffer(struct fb_info *fb_info)
 	if (par->txbuf.buf && par->txbuf.len >= 1024)
 		sprintf(text1, ", %zu KiB buffer memory", par->txbuf.len >> 10);
 	if (spi)
-		sprintf(text2, ", spi%d.%d at %d MHz", spi->master->bus_num,
+		sprintf(text2, ", spi%d.%d at %d MHz", spi->controller->bus_num,
 			spi_get_chipselect(spi, 0), spi->max_speed_hz / 1000000);
 	dev_info(fb_info->dev,
 		 "%s frame buffer, %dx%d, %d KiB video memory%s, fps=%lu%s\n",
@@ -1215,7 +1215,7 @@ int fbtft_probe_common(struct fbtft_display *display,
 
 	/* 9-bit SPI setup */
 	if (par->spi && display->buswidth == 9) {
-		if (par->spi->master->bits_per_word_mask & SPI_BPW_MASK(9)) {
+		if (par->spi->controller->bits_per_word_mask & SPI_BPW_MASK(9)) {
 			par->spi->bits_per_word = 9;
 		} else {
 			dev_warn(&par->spi->dev,
-- 
2.43.0

[PATCH v3 25/32] staging: greybus: spi: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/staging/greybus/spilib.c | 66 ++++++++++++++++----------------
 1 file changed, 33 insertions(+), 33 deletions(-)

diff --git a/drivers/staging/greybus/spilib.c b/drivers/staging/greybus/spilib.c
index efb3bec58e15..34f10685139f 100644
--- a/drivers/staging/greybus/spilib.c
+++ b/drivers/staging/greybus/spilib.c
@@ -42,7 +42,7 @@ struct gb_spilib {
 
 #define XFER_TIMEOUT_TOLERANCE		200
 
-static struct spi_master *get_master_from_spi(struct gb_spilib *spi)
+static struct spi_controller *get_controller_from_spi(struct gb_spilib *spi)
 {
 	return gb_connection_get_data(spi->connection);
 }
@@ -324,10 +324,10 @@ static void gb_spi_decode_response(struct gb_spilib *spi,
 	}
 }
 
-static int gb_spi_transfer_one_message(struct spi_master *master,
+static int gb_spi_transfer_one_message(struct spi_controller *ctlr,
 				       struct spi_message *msg)
 {
-	struct gb_spilib *spi = spi_master_get_devdata(master);
+	struct gb_spilib *spi = spi_controller_get_devdata(ctlr);
 	struct gb_connection *connection = spi->connection;
 	struct gb_spi_transfer_response *response;
 	struct gb_operation *operation;
@@ -371,21 +371,21 @@ static int gb_spi_transfer_one_message(struct spi_master *master,
 out:
 	msg->status = ret;
 	clean_xfer_state(spi);
-	spi_finalize_current_message(master);
+	spi_finalize_current_message(ctlr);
 
 	return ret;
 }
 
-static int gb_spi_prepare_transfer_hardware(struct spi_master *master)
+static int gb_spi_prepare_transfer_hardware(struct spi_controller *ctlr)
 {
-	struct gb_spilib *spi = spi_master_get_devdata(master);
+	struct gb_spilib *spi = spi_controller_get_devdata(ctlr);
 
 	return spi->ops->prepare_transfer_hardware(spi->parent);
 }
 
-static int gb_spi_unprepare_transfer_hardware(struct spi_master *master)
+static int gb_spi_unprepare_transfer_hardware(struct spi_controller *ctlr)
 {
-	struct gb_spilib *spi = spi_master_get_devdata(master);
+	struct gb_spilib *spi = spi_controller_get_devdata(ctlr);
 
 	spi->ops->unprepare_transfer_hardware(spi->parent);
 
@@ -440,7 +440,7 @@ static int gb_spi_get_master_config(struct gb_spilib *spi)
 
 static int gb_spi_setup_device(struct gb_spilib *spi, u8 cs)
 {
-	struct spi_master *master = get_master_from_spi(spi);
+	struct spi_controller *ctlr = get_controller_from_spi(spi);
 	struct gb_spi_device_config_request request;
 	struct gb_spi_device_config_response response;
 	struct spi_board_info spi_board = { {0} };
@@ -471,11 +471,11 @@ static int gb_spi_setup_device(struct gb_spilib *spi, u8 cs)
 		return -EINVAL;
 
 	spi_board.mode		= le16_to_cpu(response.mode);
-	spi_board.bus_num	= master->bus_num;
+	spi_board.bus_num	= ctlr->bus_num;
 	spi_board.chip_select	= cs;
 	spi_board.max_speed_hz	= le32_to_cpu(response.max_speed_hz);
 
-	spidev = spi_new_device(master, &spi_board);
+	spidev = spi_new_device(ctlr, &spi_board);
 	if (!spidev)
 		return -EINVAL;
 
@@ -486,52 +486,52 @@ int gb_spilib_master_init(struct gb_connection *connection, struct device *dev,
 			  struct spilib_ops *ops)
 {
 	struct gb_spilib *spi;
-	struct spi_master *master;
+	struct spi_controller *ctlr;
 	int ret;
 	u8 i;
 
 	/* Allocate master with space for data */
-	master = spi_alloc_master(dev, sizeof(*spi));
-	if (!master) {
+	ctlr = spi_alloc_master(dev, sizeof(*spi));
+	if (!ctlr) {
 		dev_err(dev, "cannot alloc SPI master\n");
 		return -ENOMEM;
 	}
 
-	spi = spi_master_get_devdata(master);
+	spi = spi_controller_get_devdata(ctlr);
 	spi->connection = connection;
-	gb_connection_set_data(connection, master);
+	gb_connection_set_data(connection, ctlr);
 	spi->parent = dev;
 	spi->ops = ops;
 
-	/* get master configuration */
+	/* get controller configuration */
 	ret = gb_spi_get_master_config(spi);
 	if (ret)
 		goto exit_spi_put;
 
-	master->bus_num = -1; /* Allow spi-core to allocate it dynamically */
-	master->num_chipselect = spi->num_chipselect;
-	master->mode_bits = spi->mode;
-	master->flags = spi->flags;
-	master->bits_per_word_mask = spi->bits_per_word_mask;
+	ctlr->bus_num = -1; /* Allow spi-core to allocate it dynamically */
+	ctlr->num_chipselect = spi->num_chipselect;
+	ctlr->mode_bits = spi->mode;
+	ctlr->flags = spi->flags;
+	ctlr->bits_per_word_mask = spi->bits_per_word_mask;
 
 	/* Attach methods */
-	master->cleanup = gb_spi_cleanup;
-	master->setup = gb_spi_setup;
-	master->transfer_one_message = gb_spi_transfer_one_message;
+	ctlr->cleanup = gb_spi_cleanup;
+	ctlr->setup = gb_spi_setup;
+	ctlr->transfer_one_message = gb_spi_transfer_one_message;
 
 	if (ops && ops->prepare_transfer_hardware) {
-		master->prepare_transfer_hardware =
+		ctlr->prepare_transfer_hardware =
 			gb_spi_prepare_transfer_hardware;
 	}
 
 	if (ops && ops->unprepare_transfer_hardware) {
-		master->unprepare_transfer_hardware =
+		ctlr->unprepare_transfer_hardware =
 			gb_spi_unprepare_transfer_hardware;
 	}
 
-	master->auto_runtime_pm = true;
+	ctlr->auto_runtime_pm = true;
 
-	ret = spi_register_master(master);
+	ret = spi_register_controller(ctlr);
 	if (ret < 0)
 		goto exit_spi_put;
 
@@ -548,12 +548,12 @@ int gb_spilib_master_init(struct gb_connection *connection, struct device *dev,
 	return 0;
 
 exit_spi_put:
-	spi_master_put(master);
+	spi_controller_put(ctlr);
 
 	return ret;
 
 exit_spi_unregister:
-	spi_unregister_master(master);
+	spi_unregister_controller(ctlr);
 
 	return ret;
 }
@@ -561,9 +561,9 @@ EXPORT_SYMBOL_GPL(gb_spilib_master_init);
 
 void gb_spilib_master_exit(struct gb_connection *connection)
 {
-	struct spi_master *master = gb_connection_get_data(connection);
+	struct spi_controller *ctlr = gb_connection_get_data(connection);
 
-	spi_unregister_master(master);
+	spi_unregister_controller(ctlr);
 }
 EXPORT_SYMBOL_GPL(gb_spilib_master_exit);
 
-- 
2.43.0

[PATCH v3 26/32] tpm_tis_spi: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/char/tpm/tpm_tis_spi_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c
index c5c3197ee29f..c647de7b3709 100644
--- a/drivers/char/tpm/tpm_tis_spi_main.c
+++ b/drivers/char/tpm/tpm_tis_spi_main.c
@@ -146,7 +146,7 @@ static int tpm_tis_spi_transfer_full(struct tpm_tis_data *data, u32 addr,
 	struct spi_transfer spi_xfer;
 	u8 transfer_len;
 
-	spi_bus_lock(phy->spi_device->master);
+	spi_bus_lock(phy->spi_device->controller);
 
 	while (len) {
 		transfer_len = min_t(u16, len, MAX_SPI_FRAMESIZE);
@@ -210,7 +210,7 @@ static int tpm_tis_spi_transfer_full(struct tpm_tis_data *data, u32 addr,
 		spi_sync_locked(phy->spi_device, &m);
 	}
 
-	spi_bus_unlock(phy->spi_device->master);
+	spi_bus_unlock(phy->spi_device->controller);
 	return ret;
 }
 
-- 
2.43.0

[PATCH v3 27/32] usb: gadget: max3420_udc: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/usb/gadget/udc/max3420_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/max3420_udc.c b/drivers/usb/gadget/udc/max3420_udc.c
index 89e8cf2a2a7d..7349ea774adf 100644
--- a/drivers/usb/gadget/udc/max3420_udc.c
+++ b/drivers/usb/gadget/udc/max3420_udc.c
@@ -1201,7 +1201,7 @@ static int max3420_probe(struct spi_device *spi)
 	int err, irq;
 	u8 reg[8];
 
-	if (spi->master->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+	if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
 		dev_err(&spi->dev, "UDC needs full duplex to work\n");
 		return -EINVAL;
 	}
-- 
2.43.0

[PATCH v3 28/32] video: fbdev: mmp: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/video/fbdev/mmp/hw/mmp_spi.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/video/fbdev/mmp/hw/mmp_spi.c b/drivers/video/fbdev/mmp/hw/mmp_spi.c
index 0f8f0312a7c4..cf23650d7f0b 100644
--- a/drivers/video/fbdev/mmp/hw/mmp_spi.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_spi.c
@@ -32,7 +32,7 @@ static inline int lcd_spi_write(struct spi_device *spi, u32 data)
 	int timeout = 100000, isr, ret = 0;
 	u32 tmp;
 	void __iomem *reg_base = (void __iomem *)
-		*(void **)spi_master_get_devdata(spi->master);
+		*(void **) spi_controller_get_devdata(spi->controller);
 
 	/* clear ISR */
 	writel_relaxed(~SPI_IRQ_MASK, reg_base + SPU_IRQ_ISR);
@@ -81,7 +81,7 @@ static inline int lcd_spi_write(struct spi_device *spi, u32 data)
 static int lcd_spi_setup(struct spi_device *spi)
 {
 	void __iomem *reg_base = (void __iomem *)
-		*(void **)spi_master_get_devdata(spi->master);
+		*(void **) spi_controller_get_devdata(spi->controller);
 	u32 tmp;
 
 	tmp = CFG_SCLKCNT(16) |
@@ -136,32 +136,32 @@ static int lcd_spi_one_transfer(struct spi_device *spi, struct spi_message *m)
 
 int lcd_spi_register(struct mmphw_ctrl *ctrl)
 {
-	struct spi_master *master;
+	struct spi_controller *ctlr;
 	void **p_regbase;
 	int err;
 
-	master = spi_alloc_master(ctrl->dev, sizeof(void *));
-	if (!master) {
+	ctlr = spi_alloc_master(ctrl->dev, sizeof(void *));
+	if (!ctlr) {
 		dev_err(ctrl->dev, "unable to allocate SPI master\n");
 		return -ENOMEM;
 	}
-	p_regbase = spi_master_get_devdata(master);
+	p_regbase = spi_controller_get_devdata(ctlr);
 	*p_regbase = (void __force *)ctrl->reg_base;
 
 	/* set bus num to 5 to avoid conflict with other spi hosts */
-	master->bus_num = 5;
-	master->num_chipselect = 1;
-	master->setup = lcd_spi_setup;
-	master->transfer = lcd_spi_one_transfer;
+	ctlr->bus_num = 5;
+	ctlr->num_chipselect = 1;
+	ctlr->setup = lcd_spi_setup;
+	ctlr->transfer = lcd_spi_one_transfer;
 
-	err = spi_register_master(master);
+	err = spi_register_controller(ctlr);
 	if (err < 0) {
 		dev_err(ctrl->dev, "unable to register SPI master\n");
-		spi_master_put(master);
+		spi_controller_put(ctlr);
 		return err;
 	}
 
-	dev_info(&master->dev, "registered\n");
+	dev_info(&ctlr->dev, "registered\n");
 
 	return 0;
 }
-- 
2.43.0

[PATCH v3 29/32] wifi: libertas: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/net/wireless/marvell/libertas/if_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/libertas/if_spi.c b/drivers/net/wireless/marvell/libertas/if_spi.c
index 8690b0114e23..b722a6587fd3 100644
--- a/drivers/net/wireless/marvell/libertas/if_spi.c
+++ b/drivers/net/wireless/marvell/libertas/if_spi.c
@@ -1052,7 +1052,7 @@ static int if_spi_init_card(struct if_spi_card *card)
 				"attached to SPI bus_num %d, chip_select %d. "
 				"spi->max_speed_hz=%d\n",
 				card->card_id, card->card_rev,
-				card->spi->master->bus_num,
+				card->spi->controller->bus_num,
 				spi_get_chipselect(card->spi, 0),
 				card->spi->max_speed_hz);
 		err = if_spi_prog_helper_firmware(card, helper);
-- 
2.43.0

[PATCH v3 30/32] spi: fsl-lib: Follow renaming of SPI "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.

To be able to remove these compatibility macros push the renaming into
this driver.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-fsl-lib.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c
index 885757c29fbb..4fc2c56555b5 100644
--- a/drivers/spi/spi-fsl-lib.c
+++ b/drivers/spi/spi-fsl-lib.c
@@ -82,18 +82,18 @@ void mpc8xxx_spi_probe(struct device *dev, struct resource *mem,
 			unsigned int irq)
 {
 	struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
-	struct spi_master *master;
+	struct spi_controller *ctlr;
 	struct mpc8xxx_spi *mpc8xxx_spi;
 
-	master = dev_get_drvdata(dev);
+	ctlr = dev_get_drvdata(dev);
 
 	/* the spi->mode bits understood by this driver: */
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH
+	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH
 			| SPI_LSB_FIRST | SPI_LOOP;
 
-	master->dev.of_node = dev->of_node;
+	ctlr->dev.of_node = dev->of_node;
 
-	mpc8xxx_spi = spi_master_get_devdata(master);
+	mpc8xxx_spi = spi_controller_get_devdata(ctlr);
 	mpc8xxx_spi->dev = dev;
 	mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8;
 	mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8;
@@ -104,8 +104,8 @@ void mpc8xxx_spi_probe(struct device *dev, struct resource *mem,
 	mpc8xxx_spi->rx_shift = 0;
 	mpc8xxx_spi->tx_shift = 0;
 
-	master->bus_num = pdata->bus_num;
-	master->num_chipselect = pdata->max_chipselect;
+	ctlr->bus_num = pdata->bus_num;
+	ctlr->num_chipselect = pdata->max_chipselect;
 
 	init_completion(&mpc8xxx_spi->done);
 }
-- 
2.43.0

[PATCH v3 31/32] spi: Drop compat layer from renaming "master" to "controller"

[Uwe Kleine-König]

Now that all in-tree users followed the rename, the compat stuff can go
away.  This completes the renaming started with commit 8caab75fd2c2
("spi: Generalize SPI "master" to "controller"")

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 .../driver-api/driver-model/devres.rst        |  2 +-
 drivers/spi/spi.c                             |  2 +-
 include/linux/spi/spi.h                       | 20 +------------------
 3 files changed, 3 insertions(+), 21 deletions(-)

diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index c5f99d834ec5..49c6fd82cd5d 100644
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -462,7 +462,7 @@ SLAVE DMA ENGINE
 SPI
   devm_spi_alloc_master()
   devm_spi_alloc_slave()
-  devm_spi_register_master()
+  devm_spi_register_controller()
 
 WATCHDOG
   devm_watchdog_register_device()
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 53c25a351dab..c08fe2cb256c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -584,7 +584,7 @@ struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
 		return NULL;
 	}
 
-	spi->master = spi->controller = ctlr;
+	spi->controller = ctlr;
 	spi->dev.parent = &ctlr->dev;
 	spi->dev.bus = &spi_bus_type;
 	spi->dev.release = spidev_release;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 9e3866809a0e..7500db33f70c 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -131,7 +131,6 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
  * struct spi_device - Controller side proxy for an SPI slave device
  * @dev: Driver model representation of the device.
  * @controller: SPI controller used with the device.
- * @master: Copy of controller, for backwards compatibility.
  * @max_speed_hz: Maximum clock rate to be used with this chip
  *	(on this board); may be changed by the device's driver.
  *	The spi_transfer.speed_hz can override this for each transfer.
@@ -185,7 +184,6 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
 struct spi_device {
 	struct device		dev;
 	struct spi_controller	*controller;
-	struct spi_controller	*master;	/* Compatibility layer */
 	u32			max_speed_hz;
 	u8			chip_select[SPI_CS_CNT_MAX];
 	u8			bits_per_word;
@@ -1298,7 +1296,7 @@ spi_max_transfer_size(struct spi_device *spi)
  */
 static inline bool spi_is_bpw_supported(struct spi_device *spi, u32 bpw)
 {
-	u32 bpw_mask = spi->master->bits_per_word_mask;
+	u32 bpw_mask = spi->controller->bits_per_word_mask;
 
 	if (bpw == 8 || (bpw <= 32 && bpw_mask & SPI_BPW_MASK(bpw)))
 		return true;
@@ -1670,20 +1668,4 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer)
 	return list_is_last(&xfer->transfer_list, &ctlr->cur_msg->transfers);
 }
 
-/* Compatibility layer */
-#define spi_master			spi_controller
-
-#define spi_master_get_devdata(_ctlr)	spi_controller_get_devdata(_ctlr)
-#define spi_master_set_devdata(_ctlr, _data)	\
-	spi_controller_set_devdata(_ctlr, _data)
-#define spi_master_get(_ctlr)		spi_controller_get(_ctlr)
-#define spi_master_put(_ctlr)		spi_controller_put(_ctlr)
-#define spi_master_suspend(_ctlr)	spi_controller_suspend(_ctlr)
-#define spi_master_resume(_ctlr)	spi_controller_resume(_ctlr)
-
-#define spi_register_master(_ctlr)	spi_register_controller(_ctlr)
-#define devm_spi_register_master(_dev, _ctlr) \
-	devm_spi_register_controller(_dev, _ctlr)
-#define spi_unregister_master(_ctlr)	spi_unregister_controller(_ctlr)
-
 #endif /* __LINUX_SPI_H */
-- 
2.43.0

Re: [PATCH v3 31/32] spi: Drop compat layer from renaming "master" to "controller"

[Andy Shevchenko]

On Wed, Feb 07, 2024 at 07:40:45PM +0100, Uwe Kleine-König wrote:
> Now that all in-tree users followed the rename, the compat stuff can go
> away.  This completes the renaming started with commit 8caab75fd2c2
> ("spi: Generalize SPI "master" to "controller"")

It does not complete the conversion.
We still have spi_alloc_master/slave.

Besides, we still have drivers that use master/slave terminology in
their (local) variables, functions and data type names.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 31/32] spi: Drop compat layer from renaming "master" to "controller"

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 403 bytes --]

On Fri, Feb 09, 2024 at 05:24:42PM +0200, Andy Shevchenko wrote:

> Besides, we still have drivers that use master/slave terminology in
> their (local) variables, functions and data type names.

There are also devices that have the terminology in their register maps
which we can't really do anything about.  This series was just getting
rid of this specific compat API, not solving every problem ever.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v3 31/32] spi: Drop compat layer from renaming "master" to "controller"

[Andy Shevchenko]

On Fri, Feb 09, 2024 at 03:48:19PM +0000, Mark Brown wrote:
> On Fri, Feb 09, 2024 at 05:24:42PM +0200, Andy Shevchenko wrote:
> 
> > Besides, we still have drivers that use master/slave terminology in
> > their (local) variables, functions and data type names.
> 
> There are also devices that have the terminology in their register maps
> which we can't really do anything about.  This series was just getting
> rid of this specific compat API, not solving every problem ever.

Don't take me wrong, I am not against this series, it's a very good job by Uwe
(I planned to do myself something similar, but as you know only had time for
 definitions)!

My comment is to point Uwe's attention to (still) missing parts (as per my
first paragraph).

-- 
With Best Regards,
Andy Shevchenko

[PATCH v3 32/32] Documentation: spi: Update documentation for renaming "master" to "controller"

[Uwe Kleine-König]

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. Adapt the documentation
accordingly.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 Documentation/spi/spi-summary.rst | 74 +++++++++++++++----------------
 1 file changed, 37 insertions(+), 37 deletions(-)

diff --git a/Documentation/spi/spi-summary.rst b/Documentation/spi/spi-summary.rst
index 33f05901ccf3..e714472007f1 100644
--- a/Documentation/spi/spi-summary.rst
+++ b/Documentation/spi/spi-summary.rst
@@ -9,7 +9,7 @@ What is SPI?
 The "Serial Peripheral Interface" (SPI) is a synchronous four wire serial
 link used to connect microcontrollers to sensors, memory, and peripherals.
 It's a simple "de facto" standard, not complicated enough to acquire a
-standardization body.  SPI uses a master/slave configuration.
+standardization body.  SPI uses a host/target configuration.
 
 The three signal wires hold a clock (SCK, often on the order of 10 MHz),
 and parallel data lines with "Master Out, Slave In" (MOSI) or "Master In,
@@ -19,11 +19,11 @@ commonly used.  Each clock cycle shifts data out and data in; the clock
 doesn't cycle except when there is a data bit to shift.  Not all data bits
 are used though; not every protocol uses those full duplex capabilities.
 
-SPI masters use a fourth "chip select" line to activate a given SPI slave
+SPI hosts use a fourth "chip select" line to activate a given SPI slave
 device, so those three signal wires may be connected to several chips
 in parallel.  All SPI slaves support chipselects; they are usually active
 low signals, labeled nCSx for slave 'x' (e.g. nCS0).  Some devices have
-other signals, often including an interrupt to the master.
+other signals, often including an interrupt to the host.
 
 Unlike serial busses like USB or SMBus, even low level protocols for
 SPI slave functions are usually not interoperable between vendors
@@ -45,8 +45,8 @@ SPI slave functions are usually not interoperable between vendors
 
 In the same way, SPI slaves will only rarely support any kind of automatic
 discovery/enumeration protocol.  The tree of slave devices accessible from
-a given SPI master will normally be set up manually, with configuration
-tables.
+a given SPI host controller will normally be set up manually, with
+configuration tables.
 
 SPI is only one of the names used by such four-wire protocols, and
 most controllers have no problem handling "MicroWire" (think of it as
@@ -62,8 +62,8 @@ course they won't handle full duplex transfers.  You may find such
 chips described as using "three wire" signaling: SCK, data, nCSx.
 (That data line is sometimes called MOMI or SISO.)
 
-Microcontrollers often support both master and slave sides of the SPI
-protocol.  This document (and Linux) supports both the master and slave
+Microcontrollers often support both host and target sides of the SPI
+protocol.  This document (and Linux) supports both the host and target
 sides of SPI interactions.
 
 
@@ -118,7 +118,7 @@ starting low (CPOL=0) and data stabilized for sampling during the
 trailing clock edge (CPHA=1), that's SPI mode 1.
 
 Note that the clock mode is relevant as soon as the chipselect goes
-active.  So the master must set the clock to inactive before selecting
+active.  So the host must set the clock to inactive before selecting
 a slave, and the slave can tell the chosen polarity by sampling the
 clock level when its select line goes active.  That's why many devices
 support for example both modes 0 and 3:  they don't care about polarity,
@@ -179,7 +179,7 @@ shows up in sysfs in several locations::
    /sys/bus/spi/drivers/D ... driver for one or more spi*.* devices
 
    /sys/class/spi_master/spiB ... symlink to a logical node which could hold
-	class related state for the SPI master controller managing bus "B".
+	class related state for the SPI host controller managing bus "B".
 	All spiB.* devices share one physical SPI bus segment, with SCLK,
 	MOSI, and MISO.
 
@@ -316,7 +316,7 @@ sharing a bus with a device that interprets chipselect "backwards" is
 not possible until the infrastructure knows how to deselect it.
 
 Then your board initialization code would register that table with the SPI
-infrastructure, so that it's available later when the SPI master controller
+infrastructure, so that it's available later when the SPI host controller
 driver is registered::
 
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
@@ -474,34 +474,34 @@ How do I write an "SPI Master Controller Driver"?
 An SPI controller will probably be registered on the platform_bus; write
 a driver to bind to the device, whichever bus is involved.
 
-The main task of this type of driver is to provide an "spi_master".
-Use spi_alloc_master() to allocate the master, and spi_master_get_devdata()
-to get the driver-private data allocated for that device.
+The main task of this type of driver is to provide an "spi_controller".
+Use spi_alloc_host() to allocate the host controller, and
+spi_controller_get_devdata() to get the driver-private data allocated for that
+device.
 
 ::
 
-	struct spi_master	*master;
+	struct spi_controller	*ctlr;
 	struct CONTROLLER	*c;
 
-	master = spi_alloc_master(dev, sizeof *c);
-	if (!master)
+	ctlr = spi_alloc_host(dev, sizeof *c);
+	if (!ctlr)
 		return -ENODEV;
 
-	c = spi_master_get_devdata(master);
+	c = spi_controller_get_devdata(ctlr);
 
-The driver will initialize the fields of that spi_master, including the
-bus number (maybe the same as the platform device ID) and three methods
-used to interact with the SPI core and SPI protocol drivers.  It will
-also initialize its own internal state.  (See below about bus numbering
-and those methods.)
+The driver will initialize the fields of that spi_controller, including the bus
+number (maybe the same as the platform device ID) and three methods used to
+interact with the SPI core and SPI protocol drivers.  It will also initialize
+its own internal state.  (See below about bus numbering and those methods.)
 
-After you initialize the spi_master, then use spi_register_master() to
+After you initialize the spi_controller, then use spi_register_controller() to
 publish it to the rest of the system. At that time, device nodes for the
 controller and any predeclared spi devices will be made available, and
 the driver model core will take care of binding them to drivers.
 
-If you need to remove your SPI controller driver, spi_unregister_master()
-will reverse the effect of spi_register_master().
+If you need to remove your SPI controller driver, spi_unregister_controller()
+will reverse the effect of spi_register_controller().
 
 
 Bus Numbering
@@ -519,10 +519,10 @@ then be replaced by a dynamically assigned number. You'd then need to treat
 this as a non-static configuration (see above).
 
 
-SPI Master Methods
-^^^^^^^^^^^^^^^^^^
+SPI Host Controller Methods
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-``master->setup(struct spi_device *spi)``
+``ctlr->setup(struct spi_device *spi)``
 	This sets up the device clock rate, SPI mode, and word sizes.
 	Drivers may change the defaults provided by board_info, and then
 	call spi_setup(spi) to invoke this routine.  It may sleep.
@@ -534,34 +534,34 @@ SPI Master Methods
 	.. note::
 
 		BUG ALERT:  for some reason the first version of
-		many spi_master drivers seems to get this wrong.
+		many spi_controller drivers seems to get this wrong.
 		When you code setup(), ASSUME that the controller
 		is actively processing transfers for another device.
 
-``master->cleanup(struct spi_device *spi)``
+``ctlr->cleanup(struct spi_device *spi)``
 	Your controller driver may use spi_device.controller_state to hold
 	state it dynamically associates with that device.  If you do that,
 	be sure to provide the cleanup() method to free that state.
 
-``master->prepare_transfer_hardware(struct spi_master *master)``
+``ctlr->prepare_transfer_hardware(struct spi_controller *ctlr)``
 	This will be called by the queue mechanism to signal to the driver
 	that a message is coming in soon, so the subsystem requests the
 	driver to prepare the transfer hardware by issuing this call.
 	This may sleep.
 
-``master->unprepare_transfer_hardware(struct spi_master *master)``
+``ctlr->unprepare_transfer_hardware(struct spi_controller *ctlr)``
 	This will be called by the queue mechanism to signal to the driver
 	that there are no more messages pending in the queue and it may
 	relax the hardware (e.g. by power management calls). This may sleep.
 
-``master->transfer_one_message(struct spi_master *master, struct spi_message *mesg)``
+``ctlr->transfer_one_message(struct spi_controller *ctlr, struct spi_message *mesg)``
 	The subsystem calls the driver to transfer a single message while
 	queuing transfers that arrive in the meantime. When the driver is
 	finished with this message, it must call
 	spi_finalize_current_message() so the subsystem can issue the next
 	message. This may sleep.
 
-``master->transfer_one(struct spi_master *master, struct spi_device *spi, struct spi_transfer *transfer)``
+``ctrl->transfer_one(struct spi_controller *ctlr, struct spi_device *spi, struct spi_transfer *transfer)``
 	The subsystem calls the driver to transfer a single transfer while
 	queuing transfers that arrive in the meantime. When the driver is
 	finished with this transfer, it must call
@@ -576,15 +576,15 @@ SPI Master Methods
 	* 0: transfer is finished
 	* 1: transfer is still in progress
 
-``master->set_cs_timing(struct spi_device *spi, u8 setup_clk_cycles, u8 hold_clk_cycles, u8 inactive_clk_cycles)``
-	This method allows SPI client drivers to request SPI master controller
+``ctrl->set_cs_timing(struct spi_device *spi, u8 setup_clk_cycles, u8 hold_clk_cycles, u8 inactive_clk_cycles)``
+	This method allows SPI client drivers to request SPI host controller
 	for configuring device specific CS setup, hold and inactive timing
 	requirements.
 
 Deprecated Methods
 ^^^^^^^^^^^^^^^^^^
 
-``master->transfer(struct spi_device *spi, struct spi_message *message)``
+``ctrl->transfer(struct spi_device *spi, struct spi_message *message)``
 	This must not sleep. Its responsibility is to arrange that the
 	transfer happens and its complete() callback is issued. The two
 	will normally happen later, after other transfers complete, and
-- 
2.43.0

Re: [PATCH v3 32/32] Documentation: spi: Update documentation for renaming "master" to "controller"

[Andy Shevchenko]

On Wed, Feb 07, 2024 at 07:40:46PM +0100, Uwe Kleine-König wrote:
> In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
> some functions and struct members were renamed. Adapt the documentation
> accordingly.

Somebody should add a section about terminology.
Now we have again desynchonized (some are using 'host controller' /
'peripheral device'). As a result some drivers are defining variables
and data structures with this schema.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 00/32] spi: get rid of some legacy macros

[Mark Brown]

On Wed, 07 Feb 2024 19:40:14 +0100, Uwe Kleine-König wrote:
> Changes since v2
> (https://lore.kernel.org/linux-spi/cover.1705944943.git.u.kleine-koenig@pengutronix.de):
> 
>  - Drop patch "mtd: rawnand: fsl_elbc: Let .probe retry if local bus is
>    missing" which doesn't belong into this series.
>  - Fix a build failure noticed by the kernel build bot in
>    drivers/spi/spi-au1550.c. (I failed to catch this because this driver
>    is mips only, but not enabled in a mips allmodconfig. That's a bit
>    unfortunate, but not easily fixable.)
>  - Add the Reviewed-by: and Acked-by: tags I received for v2.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[01/32] fpga: ice40-spi: Follow renaming of SPI "master" to "controller"
        commit: 227ab73b89d66e3064b3c2bcb5fe382b1815763d
[02/32] ieee802154: ca8210: Follow renaming of SPI "master" to "controller"
        commit: 167b78446706bb4d19f7dd93ca320aed25ae1bbd
[03/32] iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"
        commit: 2780e7b716a605781dbee753ef4983d775a65427
[04/32] Input: pxspad - follow renaming of SPI "master" to "controller"
        commit: a78acec53b8524593afeed7258a442adc3450818
[05/32] Input: synaptics-rmi4 - follow renaming of SPI "master" to "controller"
        commit: 1245633c61baf159fcc1303d7f0855f49831b9c1
[06/32] media: mgb4: Follow renaming of SPI "master" to "controller"
        commit: 2c2f93fbfba7186cc081e23120f169eac3b5b62a
[07/32] media: netup_unidvb: Follow renaming of SPI "master" to "controller"
        commit: cfa13a64bd631d8f04a1c385923706fcef9a63ed
[08/32] media: usb/msi2500: Follow renaming of SPI "master" to "controller"
        commit: dd868ae646d5770f80f90dc056d06eb2e6d39c62
[09/32] media: v4l2-subdev: Follow renaming of SPI "master" to "controller"
        commit: d920b3a672b7f79cd13b341234aebd49233f836c
[10/32] misc: gehc-achc: Follow renaming of SPI "master" to "controller"
        commit: 26dcf09ee5d9ceba2c627ae3ba174a229f25638f
[11/32] mmc: mmc_spi: Follow renaming of SPI "master" to "controller"
        commit: b0a6776e53403aa380411f2a43cdefb9f00ff50a
[12/32] mtd: dataflash: Follow renaming of SPI "master" to "controller"
        commit: 44ee998db9eef84bf005c39486566a67cb018354
[13/32] net: ks8851: Follow renaming of SPI "master" to "controller"
        commit: 1cc711a72ae7fd44e90839f0c8d3226664de55a2
[14/32] net: vertexcom: mse102x: Follow renaming of SPI "master" to "controller"
        commit: 7969b98b80c0332f940c547f84650a20aab33841
[15/32] platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
        commit: 85ad0ec049a771c4910c8aebb2d0bd9ce9311fd9
[16/32] spi: bitbang: Follow renaming of SPI "master" to "controller"
        commit: 2259233110d90059187c5ba75537eb93eba8417b
[17/32] spi: cadence-quadspi: Don't emit error message on allocation error
        commit: e71011dacc3413bed4118d2c42f10736ffcd762c
[18/32] spi: cadence-quadspi: Follow renaming of SPI "master" to "controller"
        commit: 28e59d8bf1ace0ddf05f989a48d6824d75731267
[19/32] spi: cavium: Follow renaming of SPI "master" to "controller"
        commit: 1747fbdedba8b6b3fd459895ed5d57e534549884
[20/32] spi: geni-qcom: Follow renaming of SPI "master" to "controller"
        commit: 14cea92338a0776c1615994150e738ac0f5fbb2c
[21/32] spi: loopback-test: Follow renaming of SPI "master" to "controller"
        commit: 2c2310c17fac13aa7e78756d7f3780c7891f9397
[22/32] spi: slave-mt27xx: Follow renaming of SPI "master" to "controller"
        commit: 8197b136bbbe64a7cab1020a4b067020e5977d98
[23/32] spi: spidev: Follow renaming of SPI "master" to "controller"
        commit: d934cd6f0e5d0052772612db4b07df60cb9da387
[24/32] staging: fbtft: Follow renaming of SPI "master" to "controller"
        commit: bbd25d7260eeeaef89f7371cbadcd33dd7f7bff9
[25/32] staging: greybus: spi: Follow renaming of SPI "master" to "controller"
        commit: ee3c668dda3d2783b0fff4091461356fe000e4d8
[26/32] tpm_tis_spi: Follow renaming of SPI "master" to "controller"
        commit: b6af14eacc8814b0986e20507df423cebe9fd859
[27/32] usb: gadget: max3420_udc: Follow renaming of SPI "master" to "controller"
        commit: 8c716f4a3d4fcbec976247e3443d36cbc24c0512
[28/32] video: fbdev: mmp: Follow renaming of SPI "master" to "controller"
        commit: b23031e730e72ec9067b7c38c25e776c5e27e116
[29/32] wifi: libertas: Follow renaming of SPI "master" to "controller"
        commit: 30060d57cee194d6b70283f2faf787e2fdc61b6e
[30/32] spi: fsl-lib: Follow renaming of SPI "master" to "controller"
        commit: 801185efa2402dce57828930e9684884fc8d62da
[31/32] spi: Drop compat layer from renaming "master" to "controller"
        commit: 620d269f29a569ba37419cc03cf1da2d55f6252a
[32/32] Documentation: spi: Update documentation for renaming "master" to "controller"
        commit: 76b31eb4c2da3ddb3195cc14f6aad24908adf524

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH v3 00/32] spi: get rid of some legacy macros

[Mark Brown]

On Wed, 07 Feb 2024 19:40:14 +0100, Uwe Kleine-König wrote:
> Changes since v2
> (https://lore.kernel.org/linux-spi/cover.1705944943.git.u.kleine-koenig@pengutronix.de):
> 
>  - Drop patch "mtd: rawnand: fsl_elbc: Let .probe retry if local bus is
>    missing" which doesn't belong into this series.
>  - Fix a build failure noticed by the kernel build bot in
>    drivers/spi/spi-au1550.c. (I failed to catch this because this driver
>    is mips only, but not enabled in a mips allmodconfig. That's a bit
>    unfortunate, but not easily fixable.)
>  - Add the Reviewed-by: and Acked-by: tags I received for v2.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[01/32] fpga: ice40-spi: Follow renaming of SPI "master" to "controller"
        commit: 227ab73b89d66e3064b3c2bcb5fe382b1815763d
[02/32] ieee802154: ca8210: Follow renaming of SPI "master" to "controller"
        commit: 167b78446706bb4d19f7dd93ca320aed25ae1bbd
[03/32] iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"
        commit: 2780e7b716a605781dbee753ef4983d775a65427
[04/32] Input: pxspad - follow renaming of SPI "master" to "controller"
        commit: a78acec53b8524593afeed7258a442adc3450818
[05/32] Input: synaptics-rmi4 - follow renaming of SPI "master" to "controller"
        commit: 1245633c61baf159fcc1303d7f0855f49831b9c1
[06/32] media: mgb4: Follow renaming of SPI "master" to "controller"
        commit: 2c2f93fbfba7186cc081e23120f169eac3b5b62a
[07/32] media: netup_unidvb: Follow renaming of SPI "master" to "controller"
        commit: cfa13a64bd631d8f04a1c385923706fcef9a63ed
[08/32] media: usb/msi2500: Follow renaming of SPI "master" to "controller"
        commit: dd868ae646d5770f80f90dc056d06eb2e6d39c62
[09/32] media: v4l2-subdev: Follow renaming of SPI "master" to "controller"
        commit: d920b3a672b7f79cd13b341234aebd49233f836c
[10/32] misc: gehc-achc: Follow renaming of SPI "master" to "controller"
        commit: 26dcf09ee5d9ceba2c627ae3ba174a229f25638f
[11/32] mmc: mmc_spi: Follow renaming of SPI "master" to "controller"
        commit: b0a6776e53403aa380411f2a43cdefb9f00ff50a
[12/32] mtd: dataflash: Follow renaming of SPI "master" to "controller"
        commit: 44ee998db9eef84bf005c39486566a67cb018354
[13/32] net: ks8851: Follow renaming of SPI "master" to "controller"
        commit: 1cc711a72ae7fd44e90839f0c8d3226664de55a2
[14/32] net: vertexcom: mse102x: Follow renaming of SPI "master" to "controller"
        commit: 7969b98b80c0332f940c547f84650a20aab33841
[15/32] platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
        commit: 85ad0ec049a771c4910c8aebb2d0bd9ce9311fd9
[16/32] spi: bitbang: Follow renaming of SPI "master" to "controller"
        commit: 2259233110d90059187c5ba75537eb93eba8417b
[17/32] spi: cadence-quadspi: Don't emit error message on allocation error
        commit: e71011dacc3413bed4118d2c42f10736ffcd762c
[18/32] spi: cadence-quadspi: Follow renaming of SPI "master" to "controller"
        commit: 28e59d8bf1ace0ddf05f989a48d6824d75731267
[19/32] spi: cavium: Follow renaming of SPI "master" to "controller"
        commit: 1747fbdedba8b6b3fd459895ed5d57e534549884
[20/32] spi: geni-qcom: Follow renaming of SPI "master" to "controller"
        commit: 14cea92338a0776c1615994150e738ac0f5fbb2c
[21/32] spi: loopback-test: Follow renaming of SPI "master" to "controller"
        commit: 2c2310c17fac13aa7e78756d7f3780c7891f9397
[22/32] spi: slave-mt27xx: Follow renaming of SPI "master" to "controller"
        commit: 8197b136bbbe64a7cab1020a4b067020e5977d98
[23/32] spi: spidev: Follow renaming of SPI "master" to "controller"
        commit: d934cd6f0e5d0052772612db4b07df60cb9da387
[24/32] staging: fbtft: Follow renaming of SPI "master" to "controller"
        commit: bbd25d7260eeeaef89f7371cbadcd33dd7f7bff9
[25/32] staging: greybus: spi: Follow renaming of SPI "master" to "controller"
        commit: ee3c668dda3d2783b0fff4091461356fe000e4d8
[26/32] tpm_tis_spi: Follow renaming of SPI "master" to "controller"
        commit: b6af14eacc8814b0986e20507df423cebe9fd859
[27/32] usb: gadget: max3420_udc: Follow renaming of SPI "master" to "controller"
        commit: 8c716f4a3d4fcbec976247e3443d36cbc24c0512
[28/32] video: fbdev: mmp: Follow renaming of SPI "master" to "controller"
        commit: b23031e730e72ec9067b7c38c25e776c5e27e116
[29/32] wifi: libertas: Follow renaming of SPI "master" to "controller"
        commit: 30060d57cee194d6b70283f2faf787e2fdc61b6e
[30/32] spi: fsl-lib: Follow renaming of SPI "master" to "controller"
        commit: 801185efa2402dce57828930e9684884fc8d62da
[31/32] spi: Drop compat layer from renaming "master" to "controller"
        commit: 620d269f29a569ba37419cc03cf1da2d55f6252a
[32/32] Documentation: spi: Update documentation for renaming "master" to "controller"
        commit: 76b31eb4c2da3ddb3195cc14f6aad24908adf524

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v3 00/32] spi: get rid of some legacy macros

[patchwork-bot+chrome-platform]

Hello:

This patch was applied to chrome-platform/linux.git (for-kernelci)
by Mark Brown <broonie@kernel.org>:

On Wed,  7 Feb 2024 19:40:14 +0100 you wrote:
> Changes since v2
> (https://lore.kernel.org/linux-spi/cover.1705944943.git.u.kleine-koenig@pengutronix.de):
> 
>  - Drop patch "mtd: rawnand: fsl_elbc: Let .probe retry if local bus is
>    missing" which doesn't belong into this series.
>  - Fix a build failure noticed by the kernel build bot in
>    drivers/spi/spi-au1550.c. (I failed to catch this because this driver
>    is mips only, but not enabled in a mips allmodconfig. That's a bit
>    unfortunate, but not easily fixable.)
>  - Add the Reviewed-by: and Acked-by: tags I received for v2.
> 
> [...]

Here is the summary with links:
  - [v3,15/32] platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
    https://git.kernel.org/chrome-platform/c/85ad0ec049a7

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH v3 00/32] spi: get rid of some legacy macros

[patchwork-bot+chrome-platform]

Hello:

This patch was applied to chrome-platform/linux.git (for-kernelci)
by Mark Brown <broonie@kernel.org>:

On Wed,  7 Feb 2024 19:40:14 +0100 you wrote:
> Changes since v2
> (https://lore.kernel.org/linux-spi/cover.1705944943.git.u.kleine-koenig@pengutronix.de):
> 
>  - Drop patch "mtd: rawnand: fsl_elbc: Let .probe retry if local bus is
>    missing" which doesn't belong into this series.
>  - Fix a build failure noticed by the kernel build bot in
>    drivers/spi/spi-au1550.c. (I failed to catch this because this driver
>    is mips only, but not enabled in a mips allmodconfig. That's a bit
>    unfortunate, but not easily fixable.)
>  - Add the Reviewed-by: and Acked-by: tags I received for v2.
> 
> [...]

Here is the summary with links:
  - [v3,15/32] platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
    https://git.kernel.org/chrome-platform/c/85ad0ec049a7

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v3 00/32] spi: get rid of some legacy macros

[patchwork-bot+chrome-platform]

Hello:

This patch was applied to chrome-platform/linux.git (for-next)
by Mark Brown <broonie@kernel.org>:

On Wed,  7 Feb 2024 19:40:14 +0100 you wrote:
> Changes since v2
> (https://lore.kernel.org/linux-spi/cover.1705944943.git.u.kleine-koenig@pengutronix.de):
> 
>  - Drop patch "mtd: rawnand: fsl_elbc: Let .probe retry if local bus is
>    missing" which doesn't belong into this series.
>  - Fix a build failure noticed by the kernel build bot in
>    drivers/spi/spi-au1550.c. (I failed to catch this because this driver
>    is mips only, but not enabled in a mips allmodconfig. That's a bit
>    unfortunate, but not easily fixable.)
>  - Add the Reviewed-by: and Acked-by: tags I received for v2.
> 
> [...]

Here is the summary with links:
  - [v3,15/32] platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
    https://git.kernel.org/chrome-platform/c/85ad0ec049a7

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH v3 00/32] spi: get rid of some legacy macros

[patchwork-bot+chrome-platform]

Hello:

This patch was applied to chrome-platform/linux.git (for-next)
by Mark Brown <broonie@kernel.org>:

On Wed,  7 Feb 2024 19:40:14 +0100 you wrote:
> Changes since v2
> (https://lore.kernel.org/linux-spi/cover.1705944943.git.u.kleine-koenig@pengutronix.de):
> 
>  - Drop patch "mtd: rawnand: fsl_elbc: Let .probe retry if local bus is
>    missing" which doesn't belong into this series.
>  - Fix a build failure noticed by the kernel build bot in
>    drivers/spi/spi-au1550.c. (I failed to catch this because this driver
>    is mips only, but not enabled in a mips allmodconfig. That's a bit
>    unfortunate, but not easily fixable.)
>  - Add the Reviewed-by: and Acked-by: tags I received for v2.
> 
> [...]

Here is the summary with links:
  - [v3,15/32] platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
    https://git.kernel.org/chrome-platform/c/85ad0ec049a7

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/