[f2fs-dev] [PATCH 1/2] f2fs: remove redundant atomic file check in defragment

[f2fs-dev] [PATCH 1/2] f2fs: remove redundant atomic file check in defragment

[Zhiguo Niu]

f2fs_is_atomic_file(inode) is checked in f2fs_defragment_range,
so remove the redundant checking in f2fs_ioc_defragment.

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
---
 fs/f2fs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 75a8b22..3e22f6e 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2883,7 +2883,7 @@ static int f2fs_ioc_defragment(struct file *filp, unsigned long arg)
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	if (!S_ISREG(inode->i_mode) || f2fs_is_atomic_file(inode))
+	if (!S_ISREG(inode->i_mode))
 		return -EINVAL;
 
 	if (f2fs_readonly(sbi->sb))
-- 
1.9.1



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[f2fs-dev] [PATCH 2/2] f2fs: fix to adjust appropriate length for fiemap

[Zhiguo Niu]

If user give a file size as "length" parameter for fiemap
operations, but this size is non-block size aligned,
it will show 2 segments fiemap results even this whole file
is contiguous on disk, such as the following results, please
note that this f2fs_io has been modified for testing.

 ./f2fs_io fiemap 0 19304 ylog/analyzer.py
Fiemap: offset = 0 len = 19304
        logical addr.    physical addr.   length           flags
0       0000000000000000 0000000020baa000 0000000000004000 00001000
1       0000000000004000 0000000020bae000 0000000000001000 00001001

after this patch:
 ./f2fs_io fiemap 0 19304 ylog/analyzer.py
Fiemap: offset = 0 len = 19304
	logical addr.    physical addr.   length           flags
0	0000000000000000 00000000315f3000 0000000000005000 00001000

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
---
f2fs_io has been modified for testing, the length for fiemap is
real file size, not block number
---
 fs/f2fs/data.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 90fa8ab..8c9bb42 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1966,8 +1966,8 @@ int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 			goto out;
 	}
 
-	if (bytes_to_blks(inode, len) == 0)
-		len = blks_to_bytes(inode, 1);
+	if (len & (blks_to_bytes(inode, 1) - 1))
+		len = round_up(len, blks_to_bytes(inode, 1));
 
 	start_blk = bytes_to_blks(inode, start);
 	last_blk = bytes_to_blks(inode, start + len - 1);
-- 
1.9.1



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

Re: [f2fs-dev] [PATCH 1/2] f2fs: remove redundant atomic file check in defragment

[Chao Yu via Linux-f2fs-devel]

On 2024/10/31 13:59, Zhiguo Niu wrote:
> f2fs_is_atomic_file(inode) is checked in f2fs_defragment_range,
> so remove the redundant checking in f2fs_ioc_defragment.
> 
> Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>

Reviewed-by: Chao Yu <chao@kernel.org>

Thanks,


_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

Re: [f2fs-dev] [PATCH 2/2] f2fs: fix to adjust appropriate length for fiemap

[Chao Yu via Linux-f2fs-devel]

On 2024/10/31 13:59, Zhiguo Niu wrote:
> If user give a file size as "length" parameter for fiemap
> operations, but this size is non-block size aligned,
> it will show 2 segments fiemap results even this whole file
> is contiguous on disk, such as the following results, please
> note that this f2fs_io has been modified for testing.
> 
>   ./f2fs_io fiemap 0 19304 ylog/analyzer.py
> Fiemap: offset = 0 len = 19304
>          logical addr.    physical addr.   length           flags
> 0       0000000000000000 0000000020baa000 0000000000004000 00001000
> 1       0000000000004000 0000000020bae000 0000000000001000 00001001
> 
> after this patch:
>   ./f2fs_io fiemap 0 19304 ylog/analyzer.py
> Fiemap: offset = 0 len = 19304
> 	logical addr.    physical addr.   length           flags
> 0	0000000000000000 00000000315f3000 0000000000005000 00001000

Why is FIEMAP_EXTENT_LAST missing in #0 extent? As we can see it
in #1 extent before your change.

1       0000000000004000 0000000020bae000 0000000000001000 00001001

Thanks,

> 
> Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
> ---
> f2fs_io has been modified for testing, the length for fiemap is
> real file size, not block number
> ---
>   fs/f2fs/data.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
> index 90fa8ab..8c9bb42 100644
> --- a/fs/f2fs/data.c
> +++ b/fs/f2fs/data.c
> @@ -1966,8 +1966,8 @@ int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
>   			goto out;
>   	}
>   
> -	if (bytes_to_blks(inode, len) == 0)
> -		len = blks_to_bytes(inode, 1);
> +	if (len & (blks_to_bytes(inode, 1) - 1))
> +		len = round_up(len, blks_to_bytes(inode, 1));
>   
>   	start_blk = bytes_to_blks(inode, start);
>   	last_blk = bytes_to_blks(inode, start + len - 1);



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

Re: [f2fs-dev] [PATCH 2/2] f2fs: fix to adjust appropriate length for fiemap

[Zhiguo Niu]

Chao Yu <chao@kernel.org> 于2024年11月1日周五 10:36写道：
>
> On 2024/10/31 13:59, Zhiguo Niu wrote:
> > If user give a file size as "length" parameter for fiemap
> > operations, but this size is non-block size aligned,
> > it will show 2 segments fiemap results even this whole file
> > is contiguous on disk, such as the following results, please
> > note that this f2fs_io has been modified for testing.
> >
> >   ./f2fs_io fiemap 0 19304 ylog/analyzer.py
> > Fiemap: offset = 0 len = 19304
> >          logical addr.    physical addr.   length           flags
> > 0       0000000000000000 0000000020baa000 0000000000004000 00001000
> > 1       0000000000004000 0000000020bae000 0000000000001000 00001001
> >
> > after this patch:
> >   ./f2fs_io fiemap 0 19304 ylog/analyzer.py
> > Fiemap: offset = 0 len = 19304
> >       logical addr.    physical addr.   length           flags
> > 0     0000000000000000 00000000315f3000 0000000000005000 00001000
>
> Why is FIEMAP_EXTENT_LAST missing in #0 extent? As we can see it
> in #1 extent before your change.
Hi Chao,
for normal fiemap, we just  can tag  FIEMAP_EXTENT_LAST in the following:

/* HOLE */
if (!compr_cluster && !(map.m_flags & F2FS_MAP_FLAGS)) {
start_blk = next_pgofs;

if (blks_to_bytes(inode, start_blk) < blks_to_bytes(inode,
max_inode_blocks(inode)))
goto prep_next;

flags |= FIEMAP_EXTENT_LAST;
}
but after this patch, if file length = 19304, blk len =5(page size=4096),
and f2fs_map_blocks will run once if the file is  contiguous on disk,
and will tag
F2FS_MAP_FLAGS to map.m_flags, so the following case will not run.
then

if (size) {
flags |= FIEMAP_EXTENT_MERGED;
if (IS_ENCRYPTED(inode))
flags |= FIEMAP_EXTENT_DATA_ENCRYPTED;

ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size, flags);
trace_f2fs_fiemap(inode, logical, phys, size, flags, ret);
if (ret)
goto out;
size = 0;
}
fiemap_fill_next_extent will return 1, then go out , this fiemap flow finishes.

>
> 1       0000000000004000 0000000020bae000 0000000000001000 00001001
but back to this case, because

next:
memset(&map, 0, sizeof(map));
map.m_lblk = start_blk;
map.m_len = bytes_to_blks(inode, len);
map.m_next_pgofs = &next_pgofs;
map.m_seg_type = NO_CHECK_TYPE;

map.m_len will not  reduce the part that has beed maped even map.m_lbk
has changed,
for example, if file length = 19304, before patch, map.m_len=4,
after once f2fs_map_block,  map.m_lbk=4, map.m_len still =4, so
there will be "HOLE" case in the follow-up f2fs_map_block
so it will loop until start_blk reaches the maxbytes.
/* HOLE */
if (!compr_cluster && !(map.m_flags & F2FS_MAP_FLAGS)) {
start_blk = next_pgofs;

if (blks_to_bytes(inode, start_blk) < blks_to_bytes(inode,
max_inode_blocks(inode)))
goto prep_next;

flags |= FIEMAP_EXTENT_LAST;
}

there is another case before this patch, file size = 5 blocks, if we
pass the len not
greater than or equal to 5， it will not tag FIEMAP_EXTENT_LAST

 # ./f2fs_io_new fiemap 0 4 file.apk
Fiemap: offset = 0 len = 4
        logical addr.    physical addr.   length           flags
0       0000000000000000 000000070e08f000 0000000000004000 00001008

but if len equal or greater than 5,   it will tag FIEMAP_EXTENT_LAST
 # ./f2fs_io_new fiemap 0 5 file.apk
Fiemap: offset = 0 len = 5
        logical addr.    physical addr.   length           flags
0       0000000000000000 000000070e08f000 0000000000004000 00001008
1       0000000000004000 000000070e090000 0000000000001000 00001001
thanks!
>
> Thanks,
>
> >
> > Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
> > ---
> > f2fs_io has been modified for testing, the length for fiemap is
> > real file size, not block number
> > ---
> >   fs/f2fs/data.c | 4 ++--
> >   1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
> > index 90fa8ab..8c9bb42 100644
> > --- a/fs/f2fs/data.c
> > +++ b/fs/f2fs/data.c
> > @@ -1966,8 +1966,8 @@ int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
> >                       goto out;
> >       }
> >
> > -     if (bytes_to_blks(inode, len) == 0)
> > -             len = blks_to_bytes(inode, 1);
> > +     if (len & (blks_to_bytes(inode, 1) - 1))
> > +             len = round_up(len, blks_to_bytes(inode, 1));
> >
> >       start_blk = bytes_to_blks(inode, start);
> >       last_blk = bytes_to_blks(inode, start + len - 1);
>


_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

Re: [f2fs-dev] [PATCH 2/2] f2fs: fix to adjust appropriate length for fiemap

[Zhiguo Niu]

Zhiguo Niu <niuzhiguo84@gmail.com> 于2024年11月1日周五 11:27写道：
>
> Chao Yu <chao@kernel.org> 于2024年11月1日周五 10:36写道：
> >
> > On 2024/10/31 13:59, Zhiguo Niu wrote:
> > > If user give a file size as "length" parameter for fiemap
> > > operations, but this size is non-block size aligned,
> > > it will show 2 segments fiemap results even this whole file
> > > is contiguous on disk, such as the following results, please
> > > note that this f2fs_io has been modified for testing.
> > >
> > >   ./f2fs_io fiemap 0 19304 ylog/analyzer.py
> > > Fiemap: offset = 0 len = 19304
> > >          logical addr.    physical addr.   length           flags
> > > 0       0000000000000000 0000000020baa000 0000000000004000 00001000
> > > 1       0000000000004000 0000000020bae000 0000000000001000 00001001
> > >
> > > after this patch:
> > >   ./f2fs_io fiemap 0 19304 ylog/analyzer.py
> > > Fiemap: offset = 0 len = 19304
> > >       logical addr.    physical addr.   length           flags
> > > 0     0000000000000000 00000000315f3000 0000000000005000 00001000
> >
> > Why is FIEMAP_EXTENT_LAST missing in #0 extent? As we can see it
> > in #1 extent before your change.
> Hi Chao,
> for normal fiemap, we just  can tag  FIEMAP_EXTENT_LAST in the following:
>
> /* HOLE */
> if (!compr_cluster && !(map.m_flags & F2FS_MAP_FLAGS)) {
> start_blk = next_pgofs;
>
> if (blks_to_bytes(inode, start_blk) < blks_to_bytes(inode,
> max_inode_blocks(inode)))
> goto prep_next;
>
> flags |= FIEMAP_EXTENT_LAST;
> }
> but after this patch, if file length = 19304, blk len =5(page size=4096),
> and f2fs_map_blocks will run once if the file is  contiguous on disk,
> and will tag
> F2FS_MAP_FLAGS to map.m_flags, so the following case will not run.
> then
>
> if (size) {
> flags |= FIEMAP_EXTENT_MERGED;
> if (IS_ENCRYPTED(inode))
> flags |= FIEMAP_EXTENT_DATA_ENCRYPTED;
>
> ret = fiemap_fill_next_extent(fieinfo, logical,
> phys, size, flags);
> trace_f2fs_fiemap(inode, logical, phys, size, flags, ret);
> if (ret)
> goto out;
> size = 0;
> }
> fiemap_fill_next_extent will return 1, then go out , this fiemap flow finishes.
>
> >
> > 1       0000000000004000 0000000020bae000 0000000000001000 00001001
> but back to this case, because
>
> next:
> memset(&map, 0, sizeof(map));
> map.m_lblk = start_blk;
> map.m_len = bytes_to_blks(inode, len);
> map.m_next_pgofs = &next_pgofs;
> map.m_seg_type = NO_CHECK_TYPE;
>
> map.m_len will not  reduce the part that has beed maped even map.m_lbk
> has changed,
> for example, if file length = 19304, before patch, map.m_len=4,
> after once f2fs_map_block,  map.m_lbk=4, map.m_len still =4, so
> there will be "HOLE" case in the follow-up f2fs_map_block
> so it will loop until start_blk reaches the maxbytes.
> /* HOLE */
> if (!compr_cluster && !(map.m_flags & F2FS_MAP_FLAGS)) {
> start_blk = next_pgofs;
>
> if (blks_to_bytes(inode, start_blk) < blks_to_bytes(inode,
> max_inode_blocks(inode)))
> goto prep_next;
>
> flags |= FIEMAP_EXTENT_LAST;
> }
>
> there is another case before this patch, file size = 5 blocks, if we
> pass the len not
> greater than or equal to 5， it will not tag FIEMAP_EXTENT_LAST
>
>  # ./f2fs_io_new fiemap 0 4 file.apk
> Fiemap: offset = 0 len = 4
>         logical addr.    physical addr.   length           flags
> 0       0000000000000000 000000070e08f000 0000000000004000 00001008
>
> but if len equal or greater than 5,   it will tag FIEMAP_EXTENT_LAST
>  # ./f2fs_io_new fiemap 0 5 file.apk
> Fiemap: offset = 0 len = 5
>         logical addr.    physical addr.   length           flags
> 0       0000000000000000 000000070e08f000 0000000000004000 00001008
> 1       0000000000004000 000000070e090000 0000000000001000 00001001
> thanks!
Hi Chao, pls ignore this reply , I will confirm your questions.
thanks a lot~
> >
> > Thanks,
> >
> > >
> > > Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
> > > ---
> > > f2fs_io has been modified for testing, the length for fiemap is
> > > real file size, not block number
> > > ---
> > >   fs/f2fs/data.c | 4 ++--
> > >   1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
> > > index 90fa8ab..8c9bb42 100644
> > > --- a/fs/f2fs/data.c
> > > +++ b/fs/f2fs/data.c
> > > @@ -1966,8 +1966,8 @@ int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
> > >                       goto out;
> > >       }
> > >
> > > -     if (bytes_to_blks(inode, len) == 0)
> > > -             len = blks_to_bytes(inode, 1);
> > > +     if (len & (blks_to_bytes(inode, 1) - 1))
> > > +             len = round_up(len, blks_to_bytes(inode, 1));
> > >
> > >       start_blk = bytes_to_blks(inode, start);
> > >       last_blk = bytes_to_blks(inode, start + len - 1);
> >


_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

Re: [f2fs-dev] [PATCH 2/2] f2fs: fix to adjust appropriate length for fiemap

[Zhiguo Niu]

Chao Yu <chao@kernel.org> 于2024年11月1日周五 10:36写道：
>
> On 2024/10/31 13:59, Zhiguo Niu wrote:
> > If user give a file size as "length" parameter for fiemap
> > operations, but this size is non-block size aligned,
> > it will show 2 segments fiemap results even this whole file
> > is contiguous on disk, such as the following results, please
> > note that this f2fs_io has been modified for testing.
> >
> >   ./f2fs_io fiemap 0 19304 ylog/analyzer.py
> > Fiemap: offset = 0 len = 19304
> >          logical addr.    physical addr.   length           flags
> > 0       0000000000000000 0000000020baa000 0000000000004000 00001000
> > 1       0000000000004000 0000000020bae000 0000000000001000 00001001
> >
> > after this patch:
> >   ./f2fs_io fiemap 0 19304 ylog/analyzer.py
> > Fiemap: offset = 0 len = 19304
> >       logical addr.    physical addr.   length           flags
> > 0     0000000000000000 00000000315f3000 0000000000005000 00001000
>
> Why is FIEMAP_EXTENT_LAST missing in #0 extent? As we can see it
> in #1 extent before your change.
Hi Chao,
after I confirm, this log came from my local code and with some other
modification.
And after I use the f2fs original code with this patch , can see the
FIEMAP_EXTENT_LAST
has been tagged,  the following is the fiemap log.

/f2fs_io fiemap 0 19034 ylog/analyzer.py                                      <
Fiemap: offset = 0 len = 19034
    logical addr.    physical addr.   length           flags
0    0000000000000000 00000000315f3000 0000000000005000 00001001
I will update the commit msg in the next version after reviewing.
Thanks a lot.
>
> 1       0000000000004000 0000000020bae000 0000000000001000 00001001
>
> Thanks,
>
> >
> > Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
> > ---
> > f2fs_io has been modified for testing, the length for fiemap is
> > real file size, not block number
> > ---
> >   fs/f2fs/data.c | 4 ++--
> >   1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
> > index 90fa8ab..8c9bb42 100644
> > --- a/fs/f2fs/data.c
> > +++ b/fs/f2fs/data.c
> > @@ -1966,8 +1966,8 @@ int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
> >                       goto out;
> >       }
> >
> > -     if (bytes_to_blks(inode, len) == 0)
> > -             len = blks_to_bytes(inode, 1);
> > +     if (len & (blks_to_bytes(inode, 1) - 1))
> > +             len = round_up(len, blks_to_bytes(inode, 1));
> >
> >       start_blk = bytes_to_blks(inode, start);
> >       last_blk = bytes_to_blks(inode, start + len - 1);
>


_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

Re: [f2fs-dev] [PATCH 1/2] f2fs: remove redundant atomic file check in defragment

[patchwork-bot+f2fs--- via Linux-f2fs-devel]

Hello:

This series was applied to jaegeuk/f2fs.git (dev)
by Jaegeuk Kim <jaegeuk@kernel.org>:

On Thu, 31 Oct 2024 13:59:52 +0800 you wrote:
> f2fs_is_atomic_file(inode) is checked in f2fs_defragment_range,
> so remove the redundant checking in f2fs_ioc_defragment.
> 
> Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
> ---
>  fs/f2fs/file.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Here is the summary with links:
  - [f2fs-dev,1/2] f2fs: remove redundant atomic file check in defragment
    https://git.kernel.org/jaegeuk/f2fs/c/744e66cb8779
  - [f2fs-dev,2/2] f2fs: fix to adjust appropriate length for fiemap
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html




_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel