sh mmcif cleanups

sh mmcif cleanups

[Ben Dooks]

This is a second round of the mmcif cleanups

Changes since v1:

	- fix issues with devm_ioremap return, and error printing
	- change the initial print
	- fix issue with disabling clock

sh mmcif cleanups

[Ben Dooks]

This is a second round of the mmcif cleanups

Changes since v1:

	- fix issues with devm_ioremap return, and error printing
	- change the initial print
	- fix issue with disabling clock

[PATCH v2 1/6] mmc: sh-mmcif: update to print version and bus clock rate on probe

[Ben Dooks]

Change the initial print to show chip version and the bus rate it is
working at instead of the driver version. This is more useful information
as we already know which driver version from the kernel it is in.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index e8713d7..738b155 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1470,16 +1470,17 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 	mutex_init(&host->thread_lock);
 
-	clk_disable_unprepare(host->hclk);
 	ret = mmc_add_host(mmc);
 	if (ret < 0)
 		goto emmcaddh;
 
 	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
 
-	dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
-	dev_dbg(&pdev->dev, "chip ver H'%04x\n",
-		sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
+	dev_info(&pdev->dev, "Chip version 0x%04x, clock rate %luMHz\n",
+		 sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0xffff,
+		 clk_get_rate(host->hclk) / 1000000UL);
+
+	clk_disable_unprepare(host->hclk);
 	return ret;
 
 emmcaddh:
-- 
1.9.0

[PATCH v2 1/6] mmc: sh-mmcif: update to print version and bus clock rate on probe

[Ben Dooks]

Change the initial print to show chip version and the bus rate it is
working at instead of the driver version. This is more useful information
as we already know which driver version from the kernel it is in.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index e8713d7..738b155 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1470,16 +1470,17 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 	mutex_init(&host->thread_lock);
 
-	clk_disable_unprepare(host->hclk);
 	ret = mmc_add_host(mmc);
 	if (ret < 0)
 		goto emmcaddh;
 
 	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
 
-	dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
-	dev_dbg(&pdev->dev, "chip ver H'%04x\n",
-		sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
+	dev_info(&pdev->dev, "Chip version 0x%04x, clock rate %luMHz\n",
+		 sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0xffff,
+		 clk_get_rate(host->hclk) / 1000000UL);
+
+	clk_disable_unprepare(host->hclk);
 	return ret;
 
 emmcaddh:
-- 
1.9.0

[PATCH v2 2/6] mmc: sh-mmcif: use devm_ for ioremap

[Ben Dooks]

Start tidying the probe/release code by using devm_ioremap_resource() to
map the IO registers.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
Fixes from v1:
	- return the PTR_ERR() from devm_ioremap
	- remove error print as it already shows an error
---
 drivers/mmc/host/sh_mmcif.c | 24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 738b155..bb8e4e6 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1379,22 +1379,15 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Get irq error\n");
 		return -ENXIO;
 	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "platform_get_resource error.\n");
-		return -ENXIO;
-	}
-	reg = ioremap(res->start, resource_size(res));
-	if (!reg) {
-		dev_err(&pdev->dev, "ioremap error.\n");
-		return -ENOMEM;
-	}
+	reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
 
 	mmc = mmc_alloc_host(sizeof(struct sh_mmcif_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto ealloch;
-	}
+	if (!mmc)
+		return -ENOMEM;
 
 	ret = mmc_of_parse(mmc);
 	if (ret < 0)
@@ -1499,8 +1492,6 @@ eclkget:
 	pm_runtime_disable(&pdev->dev);
 eofparse:
 	mmc_free_host(mmc);
-ealloch:
-	iounmap(reg);
 	return ret;
 }
 
@@ -1525,9 +1516,6 @@ static int sh_mmcif_remove(struct platform_device *pdev)
 	 */
 	cancel_delayed_work_sync(&host->timeout_work);
 
-	if (host->addr)
-		iounmap(host->addr);
-
 	irq[0] = platform_get_irq(pdev, 0);
 	irq[1] = platform_get_irq(pdev, 1);
 
-- 
1.9.0

[PATCH v2 2/6] mmc: sh-mmcif: use devm_ for ioremap

[Ben Dooks]

Start tidying the probe/release code by using devm_ioremap_resource() to
map the IO registers.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
Fixes from v1:
	- return the PTR_ERR() from devm_ioremap
	- remove error print as it already shows an error
---
 drivers/mmc/host/sh_mmcif.c | 24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 738b155..bb8e4e6 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1379,22 +1379,15 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Get irq error\n");
 		return -ENXIO;
 	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "platform_get_resource error.\n");
-		return -ENXIO;
-	}
-	reg = ioremap(res->start, resource_size(res));
-	if (!reg) {
-		dev_err(&pdev->dev, "ioremap error.\n");
-		return -ENOMEM;
-	}
+	reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
 
 	mmc = mmc_alloc_host(sizeof(struct sh_mmcif_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto ealloch;
-	}
+	if (!mmc)
+		return -ENOMEM;
 
 	ret = mmc_of_parse(mmc);
 	if (ret < 0)
@@ -1499,8 +1492,6 @@ eclkget:
 	pm_runtime_disable(&pdev->dev);
 eofparse:
 	mmc_free_host(mmc);
-ealloch:
-	iounmap(reg);
 	return ret;
 }
 
@@ -1525,9 +1516,6 @@ static int sh_mmcif_remove(struct platform_device *pdev)
 	 */
 	cancel_delayed_work_sync(&host->timeout_work);
 
-	if (host->addr)
-		iounmap(host->addr);
-
 	irq[0] = platform_get_irq(pdev, 0);
 	irq[1] = platform_get_irq(pdev, 1);
 
-- 
1.9.0

[PATCH v2 3/6] mmc: sh-mmcif: use devm_ for clock management

[Ben Dooks]

Use the devm_clk_get() code to get the clock and allow it to be freed
automatically on release.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index bb8e4e6..fbd7364 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1391,7 +1391,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 	ret = mmc_of_parse(mmc);
 	if (ret < 0)
-		goto eofparse;
+		goto err_host;
 
 	host		= mmc_priv(mmc);
 	host->mmc	= mmc;
@@ -1421,19 +1421,19 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	host->power = false;
 
-	host->hclk = clk_get(&pdev->dev, NULL);
+	host->hclk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(host->hclk)) {
 		ret = PTR_ERR(host->hclk);
 		dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
-		goto eclkget;
+		goto err_pm;
 	}
 	ret = sh_mmcif_clk_update(host);
 	if (ret < 0)
-		goto eclkupdate;
+		goto err_pm;
 
 	ret = pm_runtime_resume(&pdev->dev);
 	if (ret < 0)
-		goto eresume;
+		goto err_clk;
 
 	INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
 
@@ -1484,13 +1484,11 @@ ereqirq1:
 	free_irq(irq[0], host);
 ereqirq0:
 	pm_runtime_suspend(&pdev->dev);
-eresume:
+err_clk:
 	clk_disable_unprepare(host->hclk);
-eclkupdate:
-	clk_put(host->hclk);
-eclkget:
+err_pm:
 	pm_runtime_disable(&pdev->dev);
-eofparse:
+err_host:
 	mmc_free_host(mmc);
 	return ret;
 }
-- 
1.9.0

[PATCH v2 3/6] mmc: sh-mmcif: use devm_ for clock management

[Ben Dooks]

Use the devm_clk_get() code to get the clock and allow it to be freed
automatically on release.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index bb8e4e6..fbd7364 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1391,7 +1391,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 	ret = mmc_of_parse(mmc);
 	if (ret < 0)
-		goto eofparse;
+		goto err_host;
 
 	host		= mmc_priv(mmc);
 	host->mmc	= mmc;
@@ -1421,19 +1421,19 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	host->power = false;
 
-	host->hclk = clk_get(&pdev->dev, NULL);
+	host->hclk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(host->hclk)) {
 		ret = PTR_ERR(host->hclk);
 		dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
-		goto eclkget;
+		goto err_pm;
 	}
 	ret = sh_mmcif_clk_update(host);
 	if (ret < 0)
-		goto eclkupdate;
+		goto err_pm;
 
 	ret = pm_runtime_resume(&pdev->dev);
 	if (ret < 0)
-		goto eresume;
+		goto err_clk;
 
 	INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
 
@@ -1484,13 +1484,11 @@ ereqirq1:
 	free_irq(irq[0], host);
 ereqirq0:
 	pm_runtime_suspend(&pdev->dev);
-eresume:
+err_clk:
 	clk_disable_unprepare(host->hclk);
-eclkupdate:
-	clk_put(host->hclk);
-eclkget:
+err_pm:
 	pm_runtime_disable(&pdev->dev);
-eofparse:
+err_host:
 	mmc_free_host(mmc);
 	return ret;
 }
-- 
1.9.0

[PATCH v2 4/6] mmc: sh-mmcif: use devm_ for irq management

[Ben Dooks]

Use devm_request_threaded_irq() for the host interrupt handlers so we
do not have to worry about freeing them on exit or error. Tidies up the
exit path code for the driver.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index fbd7364..c536238 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1441,17 +1441,19 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
 	name = irq[1] < 0 ? dev_name(&pdev->dev) : "sh_mmc:error";
-	ret = request_threaded_irq(irq[0], sh_mmcif_intr, sh_mmcif_irqt, 0, name, host);
+	ret = devm_request_threaded_irq(&pdev->dev, irq[0], sh_mmcif_intr,
+					sh_mmcif_irqt, 0, name, host);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq error (%s)\n", name);
-		goto ereqirq0;
+		goto err_irq;
 	}
 	if (irq[1] >= 0) {
-		ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt,
-					   0, "sh_mmc:int", host);
+		ret = devm_request_threaded_irq(&pdev->dev, irq[1],
+						sh_mmcif_intr, sh_mmcif_irqt,
+						0, "sh_mmc:int", host);
 		if (ret) {
 			dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
-			goto ereqirq1;
+			goto err_irq;
 		}
 	}
 
@@ -1478,11 +1480,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 emmcaddh:
 erqcd:
-	if (irq[1] >= 0)
-		free_irq(irq[1], host);
-ereqirq1:
-	free_irq(irq[0], host);
-ereqirq0:
+err_irq:
 	pm_runtime_suspend(&pdev->dev);
 err_clk:
 	clk_disable_unprepare(host->hclk);
@@ -1496,7 +1494,6 @@ err_host:
 static int sh_mmcif_remove(struct platform_device *pdev)
 {
 	struct sh_mmcif_host *host = platform_get_drvdata(pdev);
-	int irq[2];
 
 	host->dying = true;
 	clk_prepare_enable(host->hclk);
@@ -1514,13 +1511,6 @@ static int sh_mmcif_remove(struct platform_device *pdev)
 	 */
 	cancel_delayed_work_sync(&host->timeout_work);
 
-	irq[0] = platform_get_irq(pdev, 0);
-	irq[1] = platform_get_irq(pdev, 1);
-
-	free_irq(irq[0], host);
-	if (irq[1] >= 0)
-		free_irq(irq[1], host);
-
 	clk_disable_unprepare(host->hclk);
 	mmc_free_host(host->mmc);
 	pm_runtime_put_sync(&pdev->dev);
-- 
1.9.0

[PATCH v2 4/6] mmc: sh-mmcif: use devm_ for irq management

[Ben Dooks]

Use devm_request_threaded_irq() for the host interrupt handlers so we
do not have to worry about freeing them on exit or error. Tidies up the
exit path code for the driver.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index fbd7364..c536238 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1441,17 +1441,19 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
 	name = irq[1] < 0 ? dev_name(&pdev->dev) : "sh_mmc:error";
-	ret = request_threaded_irq(irq[0], sh_mmcif_intr, sh_mmcif_irqt, 0, name, host);
+	ret = devm_request_threaded_irq(&pdev->dev, irq[0], sh_mmcif_intr,
+					sh_mmcif_irqt, 0, name, host);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq error (%s)\n", name);
-		goto ereqirq0;
+		goto err_irq;
 	}
 	if (irq[1] >= 0) {
-		ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt,
-					   0, "sh_mmc:int", host);
+		ret = devm_request_threaded_irq(&pdev->dev, irq[1],
+						sh_mmcif_intr, sh_mmcif_irqt,
+						0, "sh_mmc:int", host);
 		if (ret) {
 			dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
-			goto ereqirq1;
+			goto err_irq;
 		}
 	}
 
@@ -1478,11 +1480,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 emmcaddh:
 erqcd:
-	if (irq[1] >= 0)
-		free_irq(irq[1], host);
-ereqirq1:
-	free_irq(irq[0], host);
-ereqirq0:
+err_irq:
 	pm_runtime_suspend(&pdev->dev);
 err_clk:
 	clk_disable_unprepare(host->hclk);
@@ -1496,7 +1494,6 @@ err_host:
 static int sh_mmcif_remove(struct platform_device *pdev)
 {
 	struct sh_mmcif_host *host = platform_get_drvdata(pdev);
-	int irq[2];
 
 	host->dying = true;
 	clk_prepare_enable(host->hclk);
@@ -1514,13 +1511,6 @@ static int sh_mmcif_remove(struct platform_device *pdev)
 	 */
 	cancel_delayed_work_sync(&host->timeout_work);
 
-	irq[0] = platform_get_irq(pdev, 0);
-	irq[1] = platform_get_irq(pdev, 1);
-
-	free_irq(irq[0], host);
-	if (irq[1] >= 0)
-		free_irq(irq[1], host);
-
 	clk_disable_unprepare(host->hclk);
 	mmc_free_host(host->mmc);
 	pm_runtime_put_sync(&pdev->dev);
-- 
1.9.0

[PATCH v2 5/6] mmc: sh-mmcif: no need to call pm_runtime_suspend on error

[Ben Dooks]

The pm_runtime call should implicitly disable the device once the
probe is over if there is no explicit reference gained. There is no
need to call pm_runtime_suspend() before the pm_runtime_disable()
call.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index c536238..33f2365 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1445,7 +1445,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 					sh_mmcif_irqt, 0, name, host);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq error (%s)\n", name);
-		goto err_irq;
+		goto err_clk;
 	}
 	if (irq[1] >= 0) {
 		ret = devm_request_threaded_irq(&pdev->dev, irq[1],
@@ -1453,7 +1453,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 						0, "sh_mmc:int", host);
 		if (ret) {
 			dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
-			goto err_irq;
+			goto err_clk;
 		}
 	}
 
@@ -1480,8 +1480,6 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 emmcaddh:
 erqcd:
-err_irq:
-	pm_runtime_suspend(&pdev->dev);
 err_clk:
 	clk_disable_unprepare(host->hclk);
 err_pm:
-- 
1.9.0

[PATCH v2 5/6] mmc: sh-mmcif: no need to call pm_runtime_suspend on error

[Ben Dooks]

The pm_runtime call should implicitly disable the device once the
probe is over if there is no explicit reference gained. There is no
need to call pm_runtime_suspend() before the pm_runtime_disable()
call.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index c536238..33f2365 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1445,7 +1445,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 					sh_mmcif_irqt, 0, name, host);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq error (%s)\n", name);
-		goto err_irq;
+		goto err_clk;
 	}
 	if (irq[1] >= 0) {
 		ret = devm_request_threaded_irq(&pdev->dev, irq[1],
@@ -1453,7 +1453,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 						0, "sh_mmc:int", host);
 		if (ret) {
 			dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
-			goto err_irq;
+			goto err_clk;
 		}
 	}
 
@@ -1480,8 +1480,6 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 emmcaddh:
 erqcd:
-err_irq:
-	pm_runtime_suspend(&pdev->dev);
 err_clk:
 	clk_disable_unprepare(host->hclk);
 err_pm:
-- 
1.9.0

[PATCH v2 6/6] mmc: sh-mmcif: final error path cleanup

[Ben Dooks]

Remove the error path items that are no longer needed. The mmc card-detect
code cleans up after itself (and registers with devm) and the host error
is the same as the clock disable.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 33f2365..efe997f 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1460,14 +1460,14 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	if (pd && pd->use_cd_gpio) {
 		ret = mmc_gpio_request_cd(mmc, pd->cd_gpio, 0);
 		if (ret < 0)
-			goto erqcd;
+			goto err_clk;
 	}
 
 	mutex_init(&host->thread_lock);
 
 	ret = mmc_add_host(mmc);
 	if (ret < 0)
-		goto emmcaddh;
+		goto err_clk;
 
 	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
 
@@ -1478,8 +1478,6 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	clk_disable_unprepare(host->hclk);
 	return ret;
 
-emmcaddh:
-erqcd:
 err_clk:
 	clk_disable_unprepare(host->hclk);
 err_pm:
-- 
1.9.0

[PATCH v2 6/6] mmc: sh-mmcif: final error path cleanup

[Ben Dooks]

Remove the error path items that are no longer needed. The mmc card-detect
code cleans up after itself (and registers with devm) and the host error
is the same as the clock disable.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 drivers/mmc/host/sh_mmcif.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 33f2365..efe997f 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1460,14 +1460,14 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	if (pd && pd->use_cd_gpio) {
 		ret = mmc_gpio_request_cd(mmc, pd->cd_gpio, 0);
 		if (ret < 0)
-			goto erqcd;
+			goto err_clk;
 	}
 
 	mutex_init(&host->thread_lock);
 
 	ret = mmc_add_host(mmc);
 	if (ret < 0)
-		goto emmcaddh;
+		goto err_clk;
 
 	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
 
@@ -1478,8 +1478,6 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	clk_disable_unprepare(host->hclk);
 	return ret;
 
-emmcaddh:
-erqcd:
 err_clk:
 	clk_disable_unprepare(host->hclk);
 err_pm:
-- 
1.9.0

Re: sh mmcif cleanups

[Laurent Pinchart]

On Tuesday 01 April 2014 13:01:40 Ben Dooks wrote:
> This is a second round of the mmcif cleanups
> 
> Changes since v1:
> 
> 	- fix issues with devm_ioremap return, and error printing
> 	- change the initial print
> 	- fix issue with disabling clock

For the whole series,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart

Re: sh mmcif cleanups

[Laurent Pinchart]

On Tuesday 01 April 2014 13:01:40 Ben Dooks wrote:
> This is a second round of the mmcif cleanups
> 
> Changes since v1:
> 
> 	- fix issues with devm_ioremap return, and error printing
> 	- change the initial print
> 	- fix issue with disabling clock

For the whole series,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart

Re: sh mmcif cleanups

[Ben Dooks]

On 01/04/14 13:45, Laurent Pinchart wrote:
> On Tuesday 01 April 2014 13:01:40 Ben Dooks wrote:
>> This is a second round of the mmcif cleanups
>>
>> Changes since v1:
>>
>> 	- fix issues with devm_ioremap return, and error printing
>> 	- change the initial print
>> 	- fix issue with disabling clock
>
> For the whole series,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks, guess this is too late for the current merge window now.

-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

Re: sh mmcif cleanups

[Ben Dooks]

On 01/04/14 13:45, Laurent Pinchart wrote:
> On Tuesday 01 April 2014 13:01:40 Ben Dooks wrote:
>> This is a second round of the mmcif cleanups
>>
>> Changes since v1:
>>
>> 	- fix issues with devm_ioremap return, and error printing
>> 	- change the initial print
>> 	- fix issue with disabling clock
>
> For the whole series,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks, guess this is too late for the current merge window now.

-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius