* [PATCH v5 0/2] Renesas R8A7743 CPG/MSSR clock support
@ 2016-11-02 21:53 ` Sergei Shtylyov
0 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2016-11-02 21:53 UTC (permalink / raw)
To: mturquette-rdvid1DuHRBWk0Htik3J/w,
linux-clk-u79uwXL29TY76Z2rM5mHXA, sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA,
horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ
Hello.
Here's the set of 2 patches against the 'clk-next' branch of CLK group's
'linux.git' repo. I've split them from the R-Car gen2 common support patch.
As the DT patches in the R8A7743/SK-RZG1M board support series depend on the
patch #1 of this series, it might make sense to merge this patch to the
'renesas.git' repo as well...
[1/2] ARM: shmobile: r8a7743: add CPG clock index macros
[2/2] clk: renesas: cpg-mssr: add R8A7743 support
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v5 1/2] ARM: shmobile: r8a7743: add CPG clock index macros
2016-11-02 21:53 ` Sergei Shtylyov
(?)
@ 2016-11-02 21:57 ` Sergei Shtylyov
2016-11-07 18:40 ` Geert Uytterhoeven
-1 siblings, 1 reply; 10+ messages in thread
From: Sergei Shtylyov @ 2016-11-02 21:57 UTC (permalink / raw)
To: robh+dt, mark.rutland, devicetree
Cc: mturquette, linux-clk, sboyd, linux-renesas-soc, horms+renesas
Add macros usable by the device tree sources to reference the R8A7743 CPG
clocks by index. The data comes from the table 7.2b in the revision 0.50
of the RZ/G Series User's Manual.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 4:
- added Geert's tag.
Changes in version 3:
- renumbered the #define's in order to match the R8A7791 CPG clocks;
- added the reference to the manual in the patch description.
Changes in version 2:
- reduced the macro value indentation.
include/dt-bindings/clock/r8a7743-cpg-mssr.h | 43 +++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
Index: linux/include/dt-bindings/clock/r8a7743-cpg-mssr.h
===================================================================
--- /dev/null
+++ linux/include/dt-bindings/clock/r8a7743-cpg-mssr.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A7743_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A7743_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a7743 CPG Core Clocks */
+#define R8A7743_CLK_Z 0
+#define R8A7743_CLK_ZG 1
+#define R8A7743_CLK_ZTR 2
+#define R8A7743_CLK_ZTRD2 3
+#define R8A7743_CLK_ZT 4
+#define R8A7743_CLK_ZX 5
+#define R8A7743_CLK_ZS 6
+#define R8A7743_CLK_HP 7
+#define R8A7743_CLK_B 9
+#define R8A7743_CLK_LB 10
+#define R8A7743_CLK_P 11
+#define R8A7743_CLK_CL 12
+#define R8A7743_CLK_M2 13
+#define R8A7743_CLK_ZB3 15
+#define R8A7743_CLK_ZB3D2 16
+#define R8A7743_CLK_DDR 17
+#define R8A7743_CLK_SDH 18
+#define R8A7743_CLK_SD0 19
+#define R8A7743_CLK_SD2 20
+#define R8A7743_CLK_SD3 21
+#define R8A7743_CLK_MMC0 22
+#define R8A7743_CLK_MP 23
+#define R8A7743_CLK_QSPI 26
+#define R8A7743_CLK_CP 27
+#define R8A7743_CLK_RCAN 28
+#define R8A7743_CLK_R 29
+#define R8A7743_CLK_OSC 30
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7743_CPG_MSSR_H__ */
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v5 1/2] ARM: shmobile: r8a7743: add CPG clock index macros
2016-11-02 21:57 ` [PATCH v5 1/2] ARM: shmobile: r8a7743: add CPG clock index macros Sergei Shtylyov
@ 2016-11-07 18:40 ` Geert Uytterhoeven
0 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2016-11-07 18:40 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Rob Herring, Mark Rutland, devicetree@vger.kernel.org,
Michael Turquette, linux-clk, Stephen Boyd, Linux-Renesas,
Simon Horman
On Wed, Nov 2, 2016 at 10:57 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add macros usable by the device tree sources to reference the R8A7743 CPG
> clocks by index. The data comes from the table 7.2b in the revision 0.50
> of the RZ/G Series User's Manual.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Applied and included in second clk-renesas-for-v4.10 pull request.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v5 2/2] clk: renesas: cpg-mssr: add R8A7743 support
@ 2016-11-02 21:59 ` Sergei Shtylyov
0 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2016-11-02 21:59 UTC (permalink / raw)
To: mturquette, linux-clk, sboyd, robh+dt, mark.rutland, devicetree
Cc: linux-renesas-soc, horms+renesas
Add RZ/G1M (R8A7743) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.
Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
<geert+renesas@glider.be>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 5:
- describe the Z clock as PLL0/VCO divided by 2.
Changes in version 4:
- made use of the new RST driver's API to read the mode pins;
- cleaned up the table copied from the manual, fixed the manual reference.
Changes in version 3:
- exchanged Audio-DMAC0/1 entries in r8a7743_mod_clks[];
- renamed the I2C6 entry to IICDVFS;
- fixed the comment to the INTC-SYS entry in r8a7743_crit_mod_clks[];
- removed the useless EXTAL divisor check from r8a7743_cpg_mssr_init();
- added Rob's ACK and Geert's tag.
Changes in version 2:
- documented the R8A7743 device tree binding;
- fixed whitespace errors/warnings reported by checkpatch.pl;
- used tabs instead of spaces for indentation;
- fixed the PLL3 column name in the PLL table.
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt | 4
drivers/clk/renesas/Kconfig | 1
drivers/clk/renesas/Makefile | 1
drivers/clk/renesas/r8a7743-cpg-mssr.c | 270 +++++++++++
drivers/clk/renesas/renesas-cpg-mssr.c | 6
drivers/clk/renesas/renesas-cpg-mssr.h | 1
6 files changed, 282 insertions(+), 1 deletion(-)
Index: renesas/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
===================================================================
--- renesas.orig/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ renesas/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -13,6 +13,7 @@ They provide the following functionaliti
Required Properties:
- compatible: Must be one of:
+ - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
- "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
@@ -22,7 +23,8 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- - "extal" (r8a7795, r8a7796)
+ - "extal" (r8a7743, r8a7795, r8a7796)
+ - "usb_extal" (r8a7743)
- "extalr" (r8a7795, r8a7796)
- #clock-cells: Must be 2
Index: renesas/drivers/clk/renesas/Kconfig
===================================================================
--- renesas.orig/drivers/clk/renesas/Kconfig
+++ renesas/drivers/clk/renesas/Kconfig
@@ -1,5 +1,6 @@
config CLK_RENESAS_CPG_MSSR
bool
+ default y if ARCH_R8A7743
default y if ARCH_R8A7795
default y if ARCH_R8A7796
Index: renesas/drivers/clk/renesas/Makefile
===================================================================
--- renesas.orig/drivers/clk/renesas/Makefile
+++ renesas/drivers/clk/renesas/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7743) += r8a7743-cpg-mssr.o rcar-gen2-cpg.o
obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-div6.o
Index: renesas/drivers/clk/renesas/r8a7743-cpg-mssr.c
===================================================================
--- /dev/null
+++ renesas/drivers/clk/renesas/r8a7743-cpg-mssr.c
@@ -0,0 +1,270 @@
+/*
+ * r8a7743 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation; of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen2-cpg.h"
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A7743_CLK_OSC,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_USB_EXTAL,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL0,
+ CLK_PLL1,
+ CLK_PLL3,
+ CLK_PLL1_DIV2,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7743_core_clks[] __initconst = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("usb_extal", CLK_USB_EXTAL),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN2_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN2_PLL0, CLK_MAIN),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN2_PLL1, CLK_MAIN),
+ DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN2_PLL3, CLK_MAIN),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+
+ /* Core Clock Outputs */
+ DEF_BASE("lb", R8A7743_CLK_LB, CLK_TYPE_GEN2_LB, CLK_PLL1),
+ DEF_BASE("sdh", R8A7743_CLK_SDH, CLK_TYPE_GEN2_SDH, CLK_PLL1),
+ DEF_BASE("sd0", R8A7743_CLK_SD0, CLK_TYPE_GEN2_SD0, CLK_PLL1),
+ DEF_BASE("qspi", R8A7743_CLK_QSPI, CLK_TYPE_GEN2_QSPI, CLK_PLL1_DIV2),
+ DEF_BASE("rcan", R8A7743_CLK_RCAN, CLK_TYPE_GEN2_RCAN, CLK_USB_EXTAL),
+
+ DEF_FIXED("z", R8A7743_CLK_Z, CLK_PLL0, 2, 1),
+ DEF_FIXED("zg", R8A7743_CLK_ZG, CLK_PLL1, 3, 1),
+ DEF_FIXED("zx", R8A7743_CLK_ZX, CLK_PLL1, 3, 1),
+ DEF_FIXED("zs", R8A7743_CLK_ZS, CLK_PLL1, 6, 1),
+ DEF_FIXED("hp", R8A7743_CLK_HP, CLK_PLL1, 12, 1),
+ DEF_FIXED("b", R8A7743_CLK_B, CLK_PLL1, 12, 1),
+ DEF_FIXED("p", R8A7743_CLK_P, CLK_PLL1, 24, 1),
+ DEF_FIXED("cl", R8A7743_CLK_CL, CLK_PLL1, 48, 1),
+ DEF_FIXED("m2", R8A7743_CLK_M2, CLK_PLL1, 8, 1),
+ DEF_FIXED("zb3", R8A7743_CLK_ZB3, CLK_PLL3, 4, 1),
+ DEF_FIXED("zb3d2", R8A7743_CLK_ZB3D2, CLK_PLL3, 8, 1),
+ DEF_FIXED("ddr", R8A7743_CLK_DDR, CLK_PLL3, 8, 1),
+ DEF_FIXED("mp", R8A7743_CLK_MP, CLK_PLL1_DIV2, 15, 1),
+ DEF_FIXED("cp", R8A7743_CLK_CP, CLK_EXTAL, 2, 1),
+ DEF_FIXED("r", R8A7743_CLK_R, CLK_PLL1, 49152, 1),
+ DEF_FIXED("osc", R8A7743_CLK_OSC, CLK_PLL1, 12288, 1),
+
+ DEF_DIV6P1("sd2", R8A7743_CLK_SD2, CLK_PLL1_DIV2, 0x078),
+ DEF_DIV6P1("sd3", R8A7743_CLK_SD3, CLK_PLL1_DIV2, 0x26c),
+ DEF_DIV6P1("mmc0", R8A7743_CLK_MMC0, CLK_PLL1_DIV2, 0x240),
+};
+
+static const struct mssr_mod_clk r8a7743_mod_clks[] __initconst = {
+ DEF_MOD("msiof0", 0, R8A7743_CLK_MP),
+ DEF_MOD("vcp0", 101, R8A7743_CLK_ZS),
+ DEF_MOD("vpc0", 103, R8A7743_CLK_ZS),
+ DEF_MOD("tmu1", 111, R8A7743_CLK_P),
+ DEF_MOD("3dg", 112, R8A7743_CLK_ZG),
+ DEF_MOD("2d-dmac", 115, R8A7743_CLK_ZS),
+ DEF_MOD("fdp1-1", 118, R8A7743_CLK_ZS),
+ DEF_MOD("fdp1-0", 119, R8A7743_CLK_ZS),
+ DEF_MOD("tmu3", 121, R8A7743_CLK_P),
+ DEF_MOD("tmu2", 122, R8A7743_CLK_P),
+ DEF_MOD("cmt0", 124, R8A7743_CLK_R),
+ DEF_MOD("tmu0", 125, R8A7743_CLK_CP),
+ DEF_MOD("vsp1du1", 127, R8A7743_CLK_ZS),
+ DEF_MOD("vsp1du0", 128, R8A7743_CLK_ZS),
+ DEF_MOD("vsp1-sy", 131, R8A7743_CLK_ZS),
+ DEF_MOD("scifa2", 202, R8A7743_CLK_MP),
+ DEF_MOD("scifa1", 203, R8A7743_CLK_MP),
+ DEF_MOD("scifa0", 204, R8A7743_CLK_MP),
+ DEF_MOD("msiof2", 205, R8A7743_CLK_MP),
+ DEF_MOD("scifb0", 206, R8A7743_CLK_MP),
+ DEF_MOD("scifb1", 207, R8A7743_CLK_MP),
+ DEF_MOD("msiof1", 208, R8A7743_CLK_MP),
+ DEF_MOD("scifb2", 216, R8A7743_CLK_MP),
+ DEF_MOD("sys-dmac1", 218, R8A7743_CLK_ZS),
+ DEF_MOD("sys-dmac0", 219, R8A7743_CLK_ZS),
+ DEF_MOD("tpu0", 304, R8A7743_CLK_CP),
+ DEF_MOD("sdhi3", 311, R8A7743_CLK_SD3),
+ DEF_MOD("sdhi2", 312, R8A7743_CLK_SD2),
+ DEF_MOD("sdhi0", 314, R8A7743_CLK_SD0),
+ DEF_MOD("mmcif0", 315, R8A7743_CLK_MMC0),
+ DEF_MOD("iic0", 318, R8A7743_CLK_HP),
+ DEF_MOD("pciec", 319, R8A7743_CLK_MP),
+ DEF_MOD("iic1", 323, R8A7743_CLK_HP),
+ DEF_MOD("usb3.0", 328, R8A7743_CLK_MP),
+ DEF_MOD("cmt1", 329, R8A7743_CLK_R),
+ DEF_MOD("usbhs-dmac0", 330, R8A7743_CLK_HP),
+ DEF_MOD("usbhs-dmac1", 331, R8A7743_CLK_HP),
+ DEF_MOD("irqc", 407, R8A7743_CLK_CP),
+ DEF_MOD("intc-sys", 408, R8A7743_CLK_ZS),
+ DEF_MOD("audio-dmac1", 501, R8A7743_CLK_HP),
+ DEF_MOD("audio-dmac0", 502, R8A7743_CLK_HP),
+ DEF_MOD("thermal", 522, CLK_EXTAL),
+ DEF_MOD("pwm", 523, R8A7743_CLK_P),
+ DEF_MOD("usb-ehci", 703, R8A7743_CLK_MP),
+ DEF_MOD("usbhs", 704, R8A7743_CLK_HP),
+ DEF_MOD("hscif2", 713, R8A7743_CLK_ZS),
+ DEF_MOD("scif5", 714, R8A7743_CLK_P),
+ DEF_MOD("scif4", 715, R8A7743_CLK_P),
+ DEF_MOD("hscif1", 716, R8A7743_CLK_ZS),
+ DEF_MOD("hscif0", 717, R8A7743_CLK_ZS),
+ DEF_MOD("scif3", 718, R8A7743_CLK_P),
+ DEF_MOD("scif2", 719, R8A7743_CLK_P),
+ DEF_MOD("scif1", 720, R8A7743_CLK_P),
+ DEF_MOD("scif0", 721, R8A7743_CLK_P),
+ DEF_MOD("du1", 723, R8A7743_CLK_ZX),
+ DEF_MOD("du0", 724, R8A7743_CLK_ZX),
+ DEF_MOD("lvds0", 726, R8A7743_CLK_ZX),
+ DEF_MOD("ipmmu-sgx", 800, R8A7743_CLK_ZX),
+ DEF_MOD("vin2", 809, R8A7743_CLK_ZG),
+ DEF_MOD("vin1", 810, R8A7743_CLK_ZG),
+ DEF_MOD("vin0", 811, R8A7743_CLK_ZG),
+ DEF_MOD("etheravb", 812, R8A7743_CLK_HP),
+ DEF_MOD("ether", 813, R8A7743_CLK_P),
+ DEF_MOD("sata1", 814, R8A7743_CLK_ZS),
+ DEF_MOD("sata0", 815, R8A7743_CLK_ZS),
+ DEF_MOD("gpio7", 904, R8A7743_CLK_CP),
+ DEF_MOD("gpio6", 905, R8A7743_CLK_CP),
+ DEF_MOD("gpio5", 907, R8A7743_CLK_CP),
+ DEF_MOD("gpio4", 908, R8A7743_CLK_CP),
+ DEF_MOD("gpio3", 909, R8A7743_CLK_CP),
+ DEF_MOD("gpio2", 910, R8A7743_CLK_CP),
+ DEF_MOD("gpio1", 911, R8A7743_CLK_CP),
+ DEF_MOD("gpio0", 912, R8A7743_CLK_CP),
+ DEF_MOD("can1", 915, R8A7743_CLK_P),
+ DEF_MOD("can0", 916, R8A7743_CLK_P),
+ DEF_MOD("qspi_mod", 917, R8A7743_CLK_QSPI),
+ DEF_MOD("i2c5", 925, R8A7743_CLK_HP),
+ DEF_MOD("iicdvfs", 926, R8A7743_CLK_CP),
+ DEF_MOD("i2c4", 927, R8A7743_CLK_HP),
+ DEF_MOD("i2c3", 928, R8A7743_CLK_HP),
+ DEF_MOD("i2c2", 929, R8A7743_CLK_HP),
+ DEF_MOD("i2c1", 930, R8A7743_CLK_HP),
+ DEF_MOD("i2c0", 931, R8A7743_CLK_HP),
+ DEF_MOD("ssi-all", 1005, R8A7743_CLK_P),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A7743_CLK_P),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+ DEF_MOD("scifa3", 1106, R8A7743_CLK_MP),
+ DEF_MOD("scifa4", 1107, R8A7743_CLK_MP),
+ DEF_MOD("scifa5", 1108, R8A7743_CLK_MP),
+};
+
+static const unsigned int r8a7743_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(408), /* INTC-SYS (GIC) */
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL3
+ * 14 13 19 (MHz) *1 *1
+ *---------------------------------------------------
+ * 0 0 0 15 x172/2 x208/2 x106
+ * 0 0 1 15 x172/2 x208/2 x88
+ * 0 1 0 20 x130/2 x156/2 x80
+ * 0 1 1 20 x130/2 x156/2 x66
+ * 1 0 0 26 / 2 x200/2 x240/2 x122
+ * 1 0 1 26 / 2 x200/2 x240/2 x102
+ * 1 1 0 30 / 2 x172/2 x208/2 x106
+ * 1 1 1 30 / 2 x172/2 x208/2 x88
+ *
+ * *1 : Table 7.5a indicates VCO output (PLLx = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
+ (((md) & BIT(13)) >> 12) | \
+ (((md) & BIT(19)) >> 19))
+
+static const struct rcar_gen2_cpg_pll_config cpg_pll_configs[8] __initconst = {
+ /* EXTAL div PLL1 mult PLL3 mult */
+ { 1, 208, 106, },
+ { 1, 208, 88, },
+ { 1, 156, 80, },
+ { 1, 156, 66, },
+ { 2, 240, 122, },
+ { 2, 240, 102, },
+ { 2, 208, 106, },
+ { 2, 208, 88, },
+};
+
+static int __init r8a7743_cpg_mssr_init(struct device *dev)
+{
+ const struct rcar_gen2_cpg_pll_config *cpg_pll_config;
+ u32 cpg_mode;
+ int error;
+
+ error = rcar_rst_read_mode_pins(&cpg_mode);
+ if (error)
+ return error;
+
+ cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+ return rcar_gen2_cpg_init(cpg_pll_config);
+}
+
+const struct cpg_mssr_info r8a7743_cpg_mssr_info __initconst = {
+ /* Core Clocks */
+ .core_clks = r8a7743_core_clks,
+ .num_core_clks = ARRAY_SIZE(r8a7743_core_clks),
+ .last_dt_core_clk = LAST_DT_CORE_CLK,
+ .num_total_core_clks = MOD_CLK_BASE,
+
+ /* Module Clocks */
+ .mod_clks = r8a7743_mod_clks,
+ .num_mod_clks = ARRAY_SIZE(r8a7743_mod_clks),
+ .num_hw_mod_clks = 12 * 32,
+
+ /* Critical Module Clocks */
+ .crit_mod_clks = r8a7743_crit_mod_clks,
+ .num_crit_mod_clks = ARRAY_SIZE(r8a7743_crit_mod_clks),
+
+ /* Callbacks */
+ .init = r8a7743_cpg_mssr_init,
+ .cpg_clk_register = rcar_gen2_cpg_clk_register,
+};
Index: renesas/drivers/clk/renesas/renesas-cpg-mssr.c
===================================================================
--- renesas.orig/drivers/clk/renesas/renesas-cpg-mssr.c
+++ renesas/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -503,6 +503,12 @@ static int __init cpg_mssr_add_clk_domai
}
static const struct of_device_id cpg_mssr_match[] = {
+#ifdef CONFIG_ARCH_R8A7743
+ {
+ .compatible = "renesas,r8a7743-cpg-mssr",
+ .data = &r8a7743_cpg_mssr_info,
+ },
+#endif
#ifdef CONFIG_ARCH_R8A7795
{
.compatible = "renesas,r8a7795-cpg-mssr",
Index: renesas/drivers/clk/renesas/renesas-cpg-mssr.h
===================================================================
--- renesas.orig/drivers/clk/renesas/renesas-cpg-mssr.h
+++ renesas/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -130,6 +130,7 @@ struct cpg_mssr_info {
struct clk **clks, void __iomem *base);
};
+extern const struct cpg_mssr_info r8a7743_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
#endif
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v5 2/2] clk: renesas: cpg-mssr: add R8A7743 support
@ 2016-11-02 21:59 ` Sergei Shtylyov
0 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2016-11-02 21:59 UTC (permalink / raw)
To: mturquette-rdvid1DuHRBWk0Htik3J/w,
linux-clk-u79uwXL29TY76Z2rM5mHXA, sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA,
horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ
Add RZ/G1M (R8A7743) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.
Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Changes in version 5:
- describe the Z clock as PLL0/VCO divided by 2.
Changes in version 4:
- made use of the new RST driver's API to read the mode pins;
- cleaned up the table copied from the manual, fixed the manual reference.
Changes in version 3:
- exchanged Audio-DMAC0/1 entries in r8a7743_mod_clks[];
- renamed the I2C6 entry to IICDVFS;
- fixed the comment to the INTC-SYS entry in r8a7743_crit_mod_clks[];
- removed the useless EXTAL divisor check from r8a7743_cpg_mssr_init();
- added Rob's ACK and Geert's tag.
Changes in version 2:
- documented the R8A7743 device tree binding;
- fixed whitespace errors/warnings reported by checkpatch.pl;
- used tabs instead of spaces for indentation;
- fixed the PLL3 column name in the PLL table.
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt | 4
drivers/clk/renesas/Kconfig | 1
drivers/clk/renesas/Makefile | 1
drivers/clk/renesas/r8a7743-cpg-mssr.c | 270 +++++++++++
drivers/clk/renesas/renesas-cpg-mssr.c | 6
drivers/clk/renesas/renesas-cpg-mssr.h | 1
6 files changed, 282 insertions(+), 1 deletion(-)
Index: renesas/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
===================================================================
--- renesas.orig/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ renesas/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -13,6 +13,7 @@ They provide the following functionaliti
Required Properties:
- compatible: Must be one of:
+ - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
- "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
@@ -22,7 +23,8 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- - "extal" (r8a7795, r8a7796)
+ - "extal" (r8a7743, r8a7795, r8a7796)
+ - "usb_extal" (r8a7743)
- "extalr" (r8a7795, r8a7796)
- #clock-cells: Must be 2
Index: renesas/drivers/clk/renesas/Kconfig
===================================================================
--- renesas.orig/drivers/clk/renesas/Kconfig
+++ renesas/drivers/clk/renesas/Kconfig
@@ -1,5 +1,6 @@
config CLK_RENESAS_CPG_MSSR
bool
+ default y if ARCH_R8A7743
default y if ARCH_R8A7795
default y if ARCH_R8A7796
Index: renesas/drivers/clk/renesas/Makefile
===================================================================
--- renesas.orig/drivers/clk/renesas/Makefile
+++ renesas/drivers/clk/renesas/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7743) += r8a7743-cpg-mssr.o rcar-gen2-cpg.o
obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-div6.o
Index: renesas/drivers/clk/renesas/r8a7743-cpg-mssr.c
===================================================================
--- /dev/null
+++ renesas/drivers/clk/renesas/r8a7743-cpg-mssr.c
@@ -0,0 +1,270 @@
+/*
+ * r8a7743 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation; of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen2-cpg.h"
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A7743_CLK_OSC,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_USB_EXTAL,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL0,
+ CLK_PLL1,
+ CLK_PLL3,
+ CLK_PLL1_DIV2,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7743_core_clks[] __initconst = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("usb_extal", CLK_USB_EXTAL),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN2_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN2_PLL0, CLK_MAIN),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN2_PLL1, CLK_MAIN),
+ DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN2_PLL3, CLK_MAIN),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+
+ /* Core Clock Outputs */
+ DEF_BASE("lb", R8A7743_CLK_LB, CLK_TYPE_GEN2_LB, CLK_PLL1),
+ DEF_BASE("sdh", R8A7743_CLK_SDH, CLK_TYPE_GEN2_SDH, CLK_PLL1),
+ DEF_BASE("sd0", R8A7743_CLK_SD0, CLK_TYPE_GEN2_SD0, CLK_PLL1),
+ DEF_BASE("qspi", R8A7743_CLK_QSPI, CLK_TYPE_GEN2_QSPI, CLK_PLL1_DIV2),
+ DEF_BASE("rcan", R8A7743_CLK_RCAN, CLK_TYPE_GEN2_RCAN, CLK_USB_EXTAL),
+
+ DEF_FIXED("z", R8A7743_CLK_Z, CLK_PLL0, 2, 1),
+ DEF_FIXED("zg", R8A7743_CLK_ZG, CLK_PLL1, 3, 1),
+ DEF_FIXED("zx", R8A7743_CLK_ZX, CLK_PLL1, 3, 1),
+ DEF_FIXED("zs", R8A7743_CLK_ZS, CLK_PLL1, 6, 1),
+ DEF_FIXED("hp", R8A7743_CLK_HP, CLK_PLL1, 12, 1),
+ DEF_FIXED("b", R8A7743_CLK_B, CLK_PLL1, 12, 1),
+ DEF_FIXED("p", R8A7743_CLK_P, CLK_PLL1, 24, 1),
+ DEF_FIXED("cl", R8A7743_CLK_CL, CLK_PLL1, 48, 1),
+ DEF_FIXED("m2", R8A7743_CLK_M2, CLK_PLL1, 8, 1),
+ DEF_FIXED("zb3", R8A7743_CLK_ZB3, CLK_PLL3, 4, 1),
+ DEF_FIXED("zb3d2", R8A7743_CLK_ZB3D2, CLK_PLL3, 8, 1),
+ DEF_FIXED("ddr", R8A7743_CLK_DDR, CLK_PLL3, 8, 1),
+ DEF_FIXED("mp", R8A7743_CLK_MP, CLK_PLL1_DIV2, 15, 1),
+ DEF_FIXED("cp", R8A7743_CLK_CP, CLK_EXTAL, 2, 1),
+ DEF_FIXED("r", R8A7743_CLK_R, CLK_PLL1, 49152, 1),
+ DEF_FIXED("osc", R8A7743_CLK_OSC, CLK_PLL1, 12288, 1),
+
+ DEF_DIV6P1("sd2", R8A7743_CLK_SD2, CLK_PLL1_DIV2, 0x078),
+ DEF_DIV6P1("sd3", R8A7743_CLK_SD3, CLK_PLL1_DIV2, 0x26c),
+ DEF_DIV6P1("mmc0", R8A7743_CLK_MMC0, CLK_PLL1_DIV2, 0x240),
+};
+
+static const struct mssr_mod_clk r8a7743_mod_clks[] __initconst = {
+ DEF_MOD("msiof0", 0, R8A7743_CLK_MP),
+ DEF_MOD("vcp0", 101, R8A7743_CLK_ZS),
+ DEF_MOD("vpc0", 103, R8A7743_CLK_ZS),
+ DEF_MOD("tmu1", 111, R8A7743_CLK_P),
+ DEF_MOD("3dg", 112, R8A7743_CLK_ZG),
+ DEF_MOD("2d-dmac", 115, R8A7743_CLK_ZS),
+ DEF_MOD("fdp1-1", 118, R8A7743_CLK_ZS),
+ DEF_MOD("fdp1-0", 119, R8A7743_CLK_ZS),
+ DEF_MOD("tmu3", 121, R8A7743_CLK_P),
+ DEF_MOD("tmu2", 122, R8A7743_CLK_P),
+ DEF_MOD("cmt0", 124, R8A7743_CLK_R),
+ DEF_MOD("tmu0", 125, R8A7743_CLK_CP),
+ DEF_MOD("vsp1du1", 127, R8A7743_CLK_ZS),
+ DEF_MOD("vsp1du0", 128, R8A7743_CLK_ZS),
+ DEF_MOD("vsp1-sy", 131, R8A7743_CLK_ZS),
+ DEF_MOD("scifa2", 202, R8A7743_CLK_MP),
+ DEF_MOD("scifa1", 203, R8A7743_CLK_MP),
+ DEF_MOD("scifa0", 204, R8A7743_CLK_MP),
+ DEF_MOD("msiof2", 205, R8A7743_CLK_MP),
+ DEF_MOD("scifb0", 206, R8A7743_CLK_MP),
+ DEF_MOD("scifb1", 207, R8A7743_CLK_MP),
+ DEF_MOD("msiof1", 208, R8A7743_CLK_MP),
+ DEF_MOD("scifb2", 216, R8A7743_CLK_MP),
+ DEF_MOD("sys-dmac1", 218, R8A7743_CLK_ZS),
+ DEF_MOD("sys-dmac0", 219, R8A7743_CLK_ZS),
+ DEF_MOD("tpu0", 304, R8A7743_CLK_CP),
+ DEF_MOD("sdhi3", 311, R8A7743_CLK_SD3),
+ DEF_MOD("sdhi2", 312, R8A7743_CLK_SD2),
+ DEF_MOD("sdhi0", 314, R8A7743_CLK_SD0),
+ DEF_MOD("mmcif0", 315, R8A7743_CLK_MMC0),
+ DEF_MOD("iic0", 318, R8A7743_CLK_HP),
+ DEF_MOD("pciec", 319, R8A7743_CLK_MP),
+ DEF_MOD("iic1", 323, R8A7743_CLK_HP),
+ DEF_MOD("usb3.0", 328, R8A7743_CLK_MP),
+ DEF_MOD("cmt1", 329, R8A7743_CLK_R),
+ DEF_MOD("usbhs-dmac0", 330, R8A7743_CLK_HP),
+ DEF_MOD("usbhs-dmac1", 331, R8A7743_CLK_HP),
+ DEF_MOD("irqc", 407, R8A7743_CLK_CP),
+ DEF_MOD("intc-sys", 408, R8A7743_CLK_ZS),
+ DEF_MOD("audio-dmac1", 501, R8A7743_CLK_HP),
+ DEF_MOD("audio-dmac0", 502, R8A7743_CLK_HP),
+ DEF_MOD("thermal", 522, CLK_EXTAL),
+ DEF_MOD("pwm", 523, R8A7743_CLK_P),
+ DEF_MOD("usb-ehci", 703, R8A7743_CLK_MP),
+ DEF_MOD("usbhs", 704, R8A7743_CLK_HP),
+ DEF_MOD("hscif2", 713, R8A7743_CLK_ZS),
+ DEF_MOD("scif5", 714, R8A7743_CLK_P),
+ DEF_MOD("scif4", 715, R8A7743_CLK_P),
+ DEF_MOD("hscif1", 716, R8A7743_CLK_ZS),
+ DEF_MOD("hscif0", 717, R8A7743_CLK_ZS),
+ DEF_MOD("scif3", 718, R8A7743_CLK_P),
+ DEF_MOD("scif2", 719, R8A7743_CLK_P),
+ DEF_MOD("scif1", 720, R8A7743_CLK_P),
+ DEF_MOD("scif0", 721, R8A7743_CLK_P),
+ DEF_MOD("du1", 723, R8A7743_CLK_ZX),
+ DEF_MOD("du0", 724, R8A7743_CLK_ZX),
+ DEF_MOD("lvds0", 726, R8A7743_CLK_ZX),
+ DEF_MOD("ipmmu-sgx", 800, R8A7743_CLK_ZX),
+ DEF_MOD("vin2", 809, R8A7743_CLK_ZG),
+ DEF_MOD("vin1", 810, R8A7743_CLK_ZG),
+ DEF_MOD("vin0", 811, R8A7743_CLK_ZG),
+ DEF_MOD("etheravb", 812, R8A7743_CLK_HP),
+ DEF_MOD("ether", 813, R8A7743_CLK_P),
+ DEF_MOD("sata1", 814, R8A7743_CLK_ZS),
+ DEF_MOD("sata0", 815, R8A7743_CLK_ZS),
+ DEF_MOD("gpio7", 904, R8A7743_CLK_CP),
+ DEF_MOD("gpio6", 905, R8A7743_CLK_CP),
+ DEF_MOD("gpio5", 907, R8A7743_CLK_CP),
+ DEF_MOD("gpio4", 908, R8A7743_CLK_CP),
+ DEF_MOD("gpio3", 909, R8A7743_CLK_CP),
+ DEF_MOD("gpio2", 910, R8A7743_CLK_CP),
+ DEF_MOD("gpio1", 911, R8A7743_CLK_CP),
+ DEF_MOD("gpio0", 912, R8A7743_CLK_CP),
+ DEF_MOD("can1", 915, R8A7743_CLK_P),
+ DEF_MOD("can0", 916, R8A7743_CLK_P),
+ DEF_MOD("qspi_mod", 917, R8A7743_CLK_QSPI),
+ DEF_MOD("i2c5", 925, R8A7743_CLK_HP),
+ DEF_MOD("iicdvfs", 926, R8A7743_CLK_CP),
+ DEF_MOD("i2c4", 927, R8A7743_CLK_HP),
+ DEF_MOD("i2c3", 928, R8A7743_CLK_HP),
+ DEF_MOD("i2c2", 929, R8A7743_CLK_HP),
+ DEF_MOD("i2c1", 930, R8A7743_CLK_HP),
+ DEF_MOD("i2c0", 931, R8A7743_CLK_HP),
+ DEF_MOD("ssi-all", 1005, R8A7743_CLK_P),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A7743_CLK_P),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+ DEF_MOD("scifa3", 1106, R8A7743_CLK_MP),
+ DEF_MOD("scifa4", 1107, R8A7743_CLK_MP),
+ DEF_MOD("scifa5", 1108, R8A7743_CLK_MP),
+};
+
+static const unsigned int r8a7743_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(408), /* INTC-SYS (GIC) */
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL3
+ * 14 13 19 (MHz) *1 *1
+ *---------------------------------------------------
+ * 0 0 0 15 x172/2 x208/2 x106
+ * 0 0 1 15 x172/2 x208/2 x88
+ * 0 1 0 20 x130/2 x156/2 x80
+ * 0 1 1 20 x130/2 x156/2 x66
+ * 1 0 0 26 / 2 x200/2 x240/2 x122
+ * 1 0 1 26 / 2 x200/2 x240/2 x102
+ * 1 1 0 30 / 2 x172/2 x208/2 x106
+ * 1 1 1 30 / 2 x172/2 x208/2 x88
+ *
+ * *1 : Table 7.5a indicates VCO output (PLLx = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
+ (((md) & BIT(13)) >> 12) | \
+ (((md) & BIT(19)) >> 19))
+
+static const struct rcar_gen2_cpg_pll_config cpg_pll_configs[8] __initconst = {
+ /* EXTAL div PLL1 mult PLL3 mult */
+ { 1, 208, 106, },
+ { 1, 208, 88, },
+ { 1, 156, 80, },
+ { 1, 156, 66, },
+ { 2, 240, 122, },
+ { 2, 240, 102, },
+ { 2, 208, 106, },
+ { 2, 208, 88, },
+};
+
+static int __init r8a7743_cpg_mssr_init(struct device *dev)
+{
+ const struct rcar_gen2_cpg_pll_config *cpg_pll_config;
+ u32 cpg_mode;
+ int error;
+
+ error = rcar_rst_read_mode_pins(&cpg_mode);
+ if (error)
+ return error;
+
+ cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+ return rcar_gen2_cpg_init(cpg_pll_config);
+}
+
+const struct cpg_mssr_info r8a7743_cpg_mssr_info __initconst = {
+ /* Core Clocks */
+ .core_clks = r8a7743_core_clks,
+ .num_core_clks = ARRAY_SIZE(r8a7743_core_clks),
+ .last_dt_core_clk = LAST_DT_CORE_CLK,
+ .num_total_core_clks = MOD_CLK_BASE,
+
+ /* Module Clocks */
+ .mod_clks = r8a7743_mod_clks,
+ .num_mod_clks = ARRAY_SIZE(r8a7743_mod_clks),
+ .num_hw_mod_clks = 12 * 32,
+
+ /* Critical Module Clocks */
+ .crit_mod_clks = r8a7743_crit_mod_clks,
+ .num_crit_mod_clks = ARRAY_SIZE(r8a7743_crit_mod_clks),
+
+ /* Callbacks */
+ .init = r8a7743_cpg_mssr_init,
+ .cpg_clk_register = rcar_gen2_cpg_clk_register,
+};
Index: renesas/drivers/clk/renesas/renesas-cpg-mssr.c
===================================================================
--- renesas.orig/drivers/clk/renesas/renesas-cpg-mssr.c
+++ renesas/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -503,6 +503,12 @@ static int __init cpg_mssr_add_clk_domai
}
static const struct of_device_id cpg_mssr_match[] = {
+#ifdef CONFIG_ARCH_R8A7743
+ {
+ .compatible = "renesas,r8a7743-cpg-mssr",
+ .data = &r8a7743_cpg_mssr_info,
+ },
+#endif
#ifdef CONFIG_ARCH_R8A7795
{
.compatible = "renesas,r8a7795-cpg-mssr",
Index: renesas/drivers/clk/renesas/renesas-cpg-mssr.h
===================================================================
--- renesas.orig/drivers/clk/renesas/renesas-cpg-mssr.h
+++ renesas/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -130,6 +130,7 @@ struct cpg_mssr_info {
struct clk **clks, void __iomem *base);
};
+extern const struct cpg_mssr_info r8a7743_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
#endif
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v5 2/2] clk: renesas: cpg-mssr: add R8A7743 support
2016-11-02 21:59 ` Sergei Shtylyov
(?)
@ 2016-11-07 10:09 ` Geert Uytterhoeven
2016-11-07 10:35 ` Sergei Shtylyov
-1 siblings, 1 reply; 10+ messages in thread
From: Geert Uytterhoeven @ 2016-11-07 10:09 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Michael Turquette, linux-clk, Stephen Boyd, Rob Herring,
Mark Rutland, devicetree@vger.kernel.org, Linux-Renesas,
Simon Horman
Hi Sergei,
On Wed, Nov 2, 2016 at 10:59 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add RZ/G1M (R8A7743) Clock Pulse Generator / Module Standby and Software
> Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
> (and RZ/G) code.
>
> Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
> <geert+renesas@glider.be>.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> ---
> Changes in version 5:
> - describe the Z clock as PLL0/VCO divided by 2.
Why did you do that?
> --- /dev/null
> +++ renesas/drivers/clk/renesas/r8a7743-cpg-mssr.c
> @@ -0,0 +1,270 @@
> + DEF_FIXED("z", R8A7743_CLK_Z, CLK_PLL0, 2, 1),
FTR, previous version had
DEF_BASE("z", R8A7743_CLK_Z, CLK_TYPE_GEN2_Z, CLK_PLL0),
which made the "z" clock configurable.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v5 2/2] clk: renesas: cpg-mssr: add R8A7743 support
2016-11-07 10:09 ` Geert Uytterhoeven
@ 2016-11-07 10:35 ` Sergei Shtylyov
0 siblings, 0 replies; 10+ messages in thread
From: Sergei Shtylyov @ 2016-11-07 10:35 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Michael Turquette, linux-clk, Stephen Boyd, Rob Herring,
Mark Rutland, devicetree@vger.kernel.org, Linux-Renesas,
Simon Horman
Hello.
On 11/7/2016 1:09 PM, Geert Uytterhoeven wrote:
>> Add RZ/G1M (R8A7743) Clock Pulse Generator / Module Standby and Software
>> Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
>> (and RZ/G) code.
>>
>> Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
>> <geert+renesas@glider.be>.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> Acked-by: Rob Herring <robh@kernel.org>
>> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>>
>> ---
>> Changes in version 5:
>> - describe the Z clock as PLL0/VCO divided by 2.
>
> Why did you do that?
I did it because I removed the divisor-by-2 from PLL0.
>> --- /dev/null
>> +++ renesas/drivers/clk/renesas/r8a7743-cpg-mssr.c
>> @@ -0,0 +1,270 @@
>
>> + DEF_FIXED("z", R8A7743_CLK_Z, CLK_PLL0, 2, 1),
>
> FTR, previous version had
>
> DEF_BASE("z", R8A7743_CLK_Z, CLK_TYPE_GEN2_Z, CLK_PLL0),
>
> which made the "z" clock configurable.
I see your point -- I should have included the divisor-by-2 into the
common R-Car gen2 driver code instead...
> Gr{oetje,eeting}s,
>
> Geert
MBR, Sergei
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v6] clk: renesas: cpg-mssr: add R8A7743 support
2016-11-02 21:53 ` Sergei Shtylyov
` (2 preceding siblings ...)
(?)
@ 2016-11-08 21:21 ` Sergei Shtylyov
2016-11-10 12:52 ` Geert Uytterhoeven
-1 siblings, 1 reply; 10+ messages in thread
From: Sergei Shtylyov @ 2016-11-08 21:21 UTC (permalink / raw)
To: mturquette, linux-clk, sboyd, robh+dt, mark.rutland, devicetree
Cc: linux-renesas-soc, horms+renesas
Add RZ/G1M (R8A7743) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.
Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
<geert+renesas@glider.be>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This patch is against the 'clk-next' branch of CLK group's 'linux.git' repo.
It depends on the common R-Car gen2 (and RZ/G) support just posted.
Changes in version 6:
- passed the PLL0 divisor to rcar_gen2_cpg_init();
- undid the version 5 changes.
Changes in version 5:
- described the Z clock as PLL0/VCO divided by 2.
Changes in version 4:
- made use of the new RST driver's API to read the mode pins;
- cleaned up the table copied from the manual, fixed the manual reference.
Changes in version 3:
- exchanged Audio-DMAC0/1 entries in r8a7743_mod_clks[];
- renamed the I2C6 entry to IICDVFS;
- fixed the comment to the INTC-SYS entry in r8a7743_crit_mod_clks[];
- removed the useless EXTAL divisor check from r8a7743_cpg_mssr_init();
- added Rob's ACK and Geert's tag.
Changes in version 2:
- documented the R8A7743 device tree binding;
- fixed whitespace errors/warnings reported by checkpatch.pl;
- used tabs instead of spaces for indentation;
- fixed the PLL3 column name in the PLL table.
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt | 4
drivers/clk/renesas/Kconfig | 1
drivers/clk/renesas/Makefile | 1
drivers/clk/renesas/r8a7743-cpg-mssr.c | 270 +++++++++++
drivers/clk/renesas/renesas-cpg-mssr.c | 6
drivers/clk/renesas/renesas-cpg-mssr.h | 1
6 files changed, 282 insertions(+), 1 deletion(-)
Index: linux/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ linux/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -13,6 +13,7 @@ They provide the following functionaliti
Required Properties:
- compatible: Must be one of:
+ - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
- "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
@@ -22,7 +23,8 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- - "extal" (r8a7795, r8a7796)
+ - "extal" (r8a7743, r8a7795, r8a7796)
+ - "usb_extal" (r8a7743)
- "extalr" (r8a7795, r8a7796)
- #clock-cells: Must be 2
Index: linux/drivers/clk/renesas/Kconfig
===================================================================
--- linux.orig/drivers/clk/renesas/Kconfig
+++ linux/drivers/clk/renesas/Kconfig
@@ -1,5 +1,6 @@
config CLK_RENESAS_CPG_MSSR
bool
+ default y if ARCH_R8A7743
default y if ARCH_R8A7795
default y if ARCH_R8A7796
Index: linux/drivers/clk/renesas/Makefile
===================================================================
--- linux.orig/drivers/clk/renesas/Makefile
+++ linux/drivers/clk/renesas/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7743) += r8a7743-cpg-mssr.o rcar-gen2-cpg.o
obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-div6.o
Index: linux/drivers/clk/renesas/r8a7743-cpg-mssr.c
===================================================================
--- /dev/null
+++ linux/drivers/clk/renesas/r8a7743-cpg-mssr.c
@@ -0,0 +1,270 @@
+/*
+ * r8a7743 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation; of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen2-cpg.h"
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A7743_CLK_OSC,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_USB_EXTAL,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL0,
+ CLK_PLL1,
+ CLK_PLL3,
+ CLK_PLL1_DIV2,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7743_core_clks[] __initconst = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("usb_extal", CLK_USB_EXTAL),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN2_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN2_PLL0, CLK_MAIN),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN2_PLL1, CLK_MAIN),
+ DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN2_PLL3, CLK_MAIN),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+
+ /* Core Clock Outputs */
+ DEF_BASE("z", R8A7743_CLK_Z, CLK_TYPE_GEN2_Z, CLK_PLL0),
+ DEF_BASE("lb", R8A7743_CLK_LB, CLK_TYPE_GEN2_LB, CLK_PLL1),
+ DEF_BASE("sdh", R8A7743_CLK_SDH, CLK_TYPE_GEN2_SDH, CLK_PLL1),
+ DEF_BASE("sd0", R8A7743_CLK_SD0, CLK_TYPE_GEN2_SD0, CLK_PLL1),
+ DEF_BASE("qspi", R8A7743_CLK_QSPI, CLK_TYPE_GEN2_QSPI, CLK_PLL1_DIV2),
+ DEF_BASE("rcan", R8A7743_CLK_RCAN, CLK_TYPE_GEN2_RCAN, CLK_USB_EXTAL),
+
+ DEF_FIXED("zg", R8A7743_CLK_ZG, CLK_PLL1, 3, 1),
+ DEF_FIXED("zx", R8A7743_CLK_ZX, CLK_PLL1, 3, 1),
+ DEF_FIXED("zs", R8A7743_CLK_ZS, CLK_PLL1, 6, 1),
+ DEF_FIXED("hp", R8A7743_CLK_HP, CLK_PLL1, 12, 1),
+ DEF_FIXED("b", R8A7743_CLK_B, CLK_PLL1, 12, 1),
+ DEF_FIXED("p", R8A7743_CLK_P, CLK_PLL1, 24, 1),
+ DEF_FIXED("cl", R8A7743_CLK_CL, CLK_PLL1, 48, 1),
+ DEF_FIXED("m2", R8A7743_CLK_M2, CLK_PLL1, 8, 1),
+ DEF_FIXED("zb3", R8A7743_CLK_ZB3, CLK_PLL3, 4, 1),
+ DEF_FIXED("zb3d2", R8A7743_CLK_ZB3D2, CLK_PLL3, 8, 1),
+ DEF_FIXED("ddr", R8A7743_CLK_DDR, CLK_PLL3, 8, 1),
+ DEF_FIXED("mp", R8A7743_CLK_MP, CLK_PLL1_DIV2, 15, 1),
+ DEF_FIXED("cp", R8A7743_CLK_CP, CLK_EXTAL, 2, 1),
+ DEF_FIXED("r", R8A7743_CLK_R, CLK_PLL1, 49152, 1),
+ DEF_FIXED("osc", R8A7743_CLK_OSC, CLK_PLL1, 12288, 1),
+
+ DEF_DIV6P1("sd2", R8A7743_CLK_SD2, CLK_PLL1_DIV2, 0x078),
+ DEF_DIV6P1("sd3", R8A7743_CLK_SD3, CLK_PLL1_DIV2, 0x26c),
+ DEF_DIV6P1("mmc0", R8A7743_CLK_MMC0, CLK_PLL1_DIV2, 0x240),
+};
+
+static const struct mssr_mod_clk r8a7743_mod_clks[] __initconst = {
+ DEF_MOD("msiof0", 0, R8A7743_CLK_MP),
+ DEF_MOD("vcp0", 101, R8A7743_CLK_ZS),
+ DEF_MOD("vpc0", 103, R8A7743_CLK_ZS),
+ DEF_MOD("tmu1", 111, R8A7743_CLK_P),
+ DEF_MOD("3dg", 112, R8A7743_CLK_ZG),
+ DEF_MOD("2d-dmac", 115, R8A7743_CLK_ZS),
+ DEF_MOD("fdp1-1", 118, R8A7743_CLK_ZS),
+ DEF_MOD("fdp1-0", 119, R8A7743_CLK_ZS),
+ DEF_MOD("tmu3", 121, R8A7743_CLK_P),
+ DEF_MOD("tmu2", 122, R8A7743_CLK_P),
+ DEF_MOD("cmt0", 124, R8A7743_CLK_R),
+ DEF_MOD("tmu0", 125, R8A7743_CLK_CP),
+ DEF_MOD("vsp1du1", 127, R8A7743_CLK_ZS),
+ DEF_MOD("vsp1du0", 128, R8A7743_CLK_ZS),
+ DEF_MOD("vsp1-sy", 131, R8A7743_CLK_ZS),
+ DEF_MOD("scifa2", 202, R8A7743_CLK_MP),
+ DEF_MOD("scifa1", 203, R8A7743_CLK_MP),
+ DEF_MOD("scifa0", 204, R8A7743_CLK_MP),
+ DEF_MOD("msiof2", 205, R8A7743_CLK_MP),
+ DEF_MOD("scifb0", 206, R8A7743_CLK_MP),
+ DEF_MOD("scifb1", 207, R8A7743_CLK_MP),
+ DEF_MOD("msiof1", 208, R8A7743_CLK_MP),
+ DEF_MOD("scifb2", 216, R8A7743_CLK_MP),
+ DEF_MOD("sys-dmac1", 218, R8A7743_CLK_ZS),
+ DEF_MOD("sys-dmac0", 219, R8A7743_CLK_ZS),
+ DEF_MOD("tpu0", 304, R8A7743_CLK_CP),
+ DEF_MOD("sdhi3", 311, R8A7743_CLK_SD3),
+ DEF_MOD("sdhi2", 312, R8A7743_CLK_SD2),
+ DEF_MOD("sdhi0", 314, R8A7743_CLK_SD0),
+ DEF_MOD("mmcif0", 315, R8A7743_CLK_MMC0),
+ DEF_MOD("iic0", 318, R8A7743_CLK_HP),
+ DEF_MOD("pciec", 319, R8A7743_CLK_MP),
+ DEF_MOD("iic1", 323, R8A7743_CLK_HP),
+ DEF_MOD("usb3.0", 328, R8A7743_CLK_MP),
+ DEF_MOD("cmt1", 329, R8A7743_CLK_R),
+ DEF_MOD("usbhs-dmac0", 330, R8A7743_CLK_HP),
+ DEF_MOD("usbhs-dmac1", 331, R8A7743_CLK_HP),
+ DEF_MOD("irqc", 407, R8A7743_CLK_CP),
+ DEF_MOD("intc-sys", 408, R8A7743_CLK_ZS),
+ DEF_MOD("audio-dmac1", 501, R8A7743_CLK_HP),
+ DEF_MOD("audio-dmac0", 502, R8A7743_CLK_HP),
+ DEF_MOD("thermal", 522, CLK_EXTAL),
+ DEF_MOD("pwm", 523, R8A7743_CLK_P),
+ DEF_MOD("usb-ehci", 703, R8A7743_CLK_MP),
+ DEF_MOD("usbhs", 704, R8A7743_CLK_HP),
+ DEF_MOD("hscif2", 713, R8A7743_CLK_ZS),
+ DEF_MOD("scif5", 714, R8A7743_CLK_P),
+ DEF_MOD("scif4", 715, R8A7743_CLK_P),
+ DEF_MOD("hscif1", 716, R8A7743_CLK_ZS),
+ DEF_MOD("hscif0", 717, R8A7743_CLK_ZS),
+ DEF_MOD("scif3", 718, R8A7743_CLK_P),
+ DEF_MOD("scif2", 719, R8A7743_CLK_P),
+ DEF_MOD("scif1", 720, R8A7743_CLK_P),
+ DEF_MOD("scif0", 721, R8A7743_CLK_P),
+ DEF_MOD("du1", 723, R8A7743_CLK_ZX),
+ DEF_MOD("du0", 724, R8A7743_CLK_ZX),
+ DEF_MOD("lvds0", 726, R8A7743_CLK_ZX),
+ DEF_MOD("ipmmu-sgx", 800, R8A7743_CLK_ZX),
+ DEF_MOD("vin2", 809, R8A7743_CLK_ZG),
+ DEF_MOD("vin1", 810, R8A7743_CLK_ZG),
+ DEF_MOD("vin0", 811, R8A7743_CLK_ZG),
+ DEF_MOD("etheravb", 812, R8A7743_CLK_HP),
+ DEF_MOD("ether", 813, R8A7743_CLK_P),
+ DEF_MOD("sata1", 814, R8A7743_CLK_ZS),
+ DEF_MOD("sata0", 815, R8A7743_CLK_ZS),
+ DEF_MOD("gpio7", 904, R8A7743_CLK_CP),
+ DEF_MOD("gpio6", 905, R8A7743_CLK_CP),
+ DEF_MOD("gpio5", 907, R8A7743_CLK_CP),
+ DEF_MOD("gpio4", 908, R8A7743_CLK_CP),
+ DEF_MOD("gpio3", 909, R8A7743_CLK_CP),
+ DEF_MOD("gpio2", 910, R8A7743_CLK_CP),
+ DEF_MOD("gpio1", 911, R8A7743_CLK_CP),
+ DEF_MOD("gpio0", 912, R8A7743_CLK_CP),
+ DEF_MOD("can1", 915, R8A7743_CLK_P),
+ DEF_MOD("can0", 916, R8A7743_CLK_P),
+ DEF_MOD("qspi_mod", 917, R8A7743_CLK_QSPI),
+ DEF_MOD("i2c5", 925, R8A7743_CLK_HP),
+ DEF_MOD("iicdvfs", 926, R8A7743_CLK_CP),
+ DEF_MOD("i2c4", 927, R8A7743_CLK_HP),
+ DEF_MOD("i2c3", 928, R8A7743_CLK_HP),
+ DEF_MOD("i2c2", 929, R8A7743_CLK_HP),
+ DEF_MOD("i2c1", 930, R8A7743_CLK_HP),
+ DEF_MOD("i2c0", 931, R8A7743_CLK_HP),
+ DEF_MOD("ssi-all", 1005, R8A7743_CLK_P),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A7743_CLK_P),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+ DEF_MOD("scifa3", 1106, R8A7743_CLK_MP),
+ DEF_MOD("scifa4", 1107, R8A7743_CLK_MP),
+ DEF_MOD("scifa5", 1108, R8A7743_CLK_MP),
+};
+
+static const unsigned int r8a7743_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(408), /* INTC-SYS (GIC) */
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL3
+ * 14 13 19 (MHz) *1 *1
+ *---------------------------------------------------
+ * 0 0 0 15 x172/2 x208/2 x106
+ * 0 0 1 15 x172/2 x208/2 x88
+ * 0 1 0 20 x130/2 x156/2 x80
+ * 0 1 1 20 x130/2 x156/2 x66
+ * 1 0 0 26 / 2 x200/2 x240/2 x122
+ * 1 0 1 26 / 2 x200/2 x240/2 x102
+ * 1 1 0 30 / 2 x172/2 x208/2 x106
+ * 1 1 1 30 / 2 x172/2 x208/2 x88
+ *
+ * *1 : Table 7.5a indicates VCO output (PLLx = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
+ (((md) & BIT(13)) >> 12) | \
+ (((md) & BIT(19)) >> 19))
+
+static const struct rcar_gen2_cpg_pll_config cpg_pll_configs[8] __initconst = {
+ /* EXTAL div PLL1 mult PLL3 mult */
+ { 1, 208, 106, },
+ { 1, 208, 88, },
+ { 1, 156, 80, },
+ { 1, 156, 66, },
+ { 2, 240, 122, },
+ { 2, 240, 102, },
+ { 2, 208, 106, },
+ { 2, 208, 88, },
+};
+
+static int __init r8a7743_cpg_mssr_init(struct device *dev)
+{
+ const struct rcar_gen2_cpg_pll_config *cpg_pll_config;
+ u32 cpg_mode;
+ int error;
+
+ error = rcar_rst_read_mode_pins(&cpg_mode);
+ if (error)
+ return error;
+
+ cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+ return rcar_gen2_cpg_init(cpg_pll_config, 2);
+}
+
+const struct cpg_mssr_info r8a7743_cpg_mssr_info __initconst = {
+ /* Core Clocks */
+ .core_clks = r8a7743_core_clks,
+ .num_core_clks = ARRAY_SIZE(r8a7743_core_clks),
+ .last_dt_core_clk = LAST_DT_CORE_CLK,
+ .num_total_core_clks = MOD_CLK_BASE,
+
+ /* Module Clocks */
+ .mod_clks = r8a7743_mod_clks,
+ .num_mod_clks = ARRAY_SIZE(r8a7743_mod_clks),
+ .num_hw_mod_clks = 12 * 32,
+
+ /* Critical Module Clocks */
+ .crit_mod_clks = r8a7743_crit_mod_clks,
+ .num_crit_mod_clks = ARRAY_SIZE(r8a7743_crit_mod_clks),
+
+ /* Callbacks */
+ .init = r8a7743_cpg_mssr_init,
+ .cpg_clk_register = rcar_gen2_cpg_clk_register,
+};
Index: linux/drivers/clk/renesas/renesas-cpg-mssr.c
===================================================================
--- linux.orig/drivers/clk/renesas/renesas-cpg-mssr.c
+++ linux/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -503,6 +503,12 @@ static int __init cpg_mssr_add_clk_domai
}
static const struct of_device_id cpg_mssr_match[] = {
+#ifdef CONFIG_ARCH_R8A7743
+ {
+ .compatible = "renesas,r8a7743-cpg-mssr",
+ .data = &r8a7743_cpg_mssr_info,
+ },
+#endif
#ifdef CONFIG_ARCH_R8A7795
{
.compatible = "renesas,r8a7795-cpg-mssr",
Index: linux/drivers/clk/renesas/renesas-cpg-mssr.h
===================================================================
--- linux.orig/drivers/clk/renesas/renesas-cpg-mssr.h
+++ linux/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -130,6 +130,7 @@ struct cpg_mssr_info {
struct clk **clks, void __iomem *base);
};
+extern const struct cpg_mssr_info r8a7743_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
#endif
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v6] clk: renesas: cpg-mssr: add R8A7743 support
2016-11-08 21:21 ` [PATCH v6] " Sergei Shtylyov
@ 2016-11-10 12:52 ` Geert Uytterhoeven
0 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2016-11-10 12:52 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Michael Turquette, linux-clk, Stephen Boyd, Rob Herring,
Mark Rutland, devicetree@vger.kernel.org, Linux-Renesas,
Simon Horman
Hi Sergei,
On Tue, Nov 8, 2016 at 10:21 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add RZ/G1M (R8A7743) Clock Pulse Generator / Module Standby and Software
> Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
> (and RZ/G) code.
>
> Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
> <geert+renesas@glider.be>.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> ---
> This patch is against the 'clk-next' branch of CLK group's 'linux.git' repo.
> It depends on the common R-Car gen2 (and RZ/G) support just posted.
>
> Changes in version 6:
> - passed the PLL0 divisor to rcar_gen2_cpg_init();
> - undid the version 5 changes.
Thanks!
Will queue with the following trivial changes:
- pass cpg_mode to rcar_gen2_cpg_init(),
- sort clock names in DT bindings,
- reformat tables for easier comparison with other clock drivers.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 10+ messages in thread