All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rob Herring (Arm)" <robh@kernel.org>
To: Denzeel Oliva <wachiturroxd150@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	 alim.akhtar@samsung.com, krzk@kernel.org,
	 linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v1 0/9] Add PERIC0/1 support for Exynos 990
Date: Fri, 07 Feb 2025 09:21:30 -0600	[thread overview]
Message-ID: <173894150599.330679.9502300326719327262.robh@kernel.org> (raw)
In-Reply-To: <20250205222223.613-1-wachiturroxd150@gmail.com>


On Wed, 05 Feb 2025 22:22:14 +0000, Denzeel Oliva wrote:
> This patch series introduces support for
> the PERIC0 and PERIC1 blocks in the Exynos 990 SoC.
> It includes devicetree bindings, clock definitions,
> and driver support for the following components:
> 
> - Universal Serial Interface (USI):
>   - Adds samsung,exynos990-usi compatible
>     for defining USI nodes in PERIC0/1.
>   - Supports UART, SPI, and I2C modes.
>   - Defines all 18 USI nodes in the Exynos 990 device tree.
> 
> - SPI (Serial Peripheral Interface):
>   - Adds `samsung,exynos990-spi` compatible.
>   - Implements SPI port configuration data.
>   - Some controllers (SPI 8, 9, and 10) use a 256 bytes FIFO depth
>     instead of the usual 64 bytes.
> 
> - HSI2C (High-Speed I2C):
>   - Adds `samsung,exynos990-hsi2c` compatible for Exynos 990.
> 
> - Clock Management Unit (CMU) for PERIC0/1:
>   - Adds clock definitions for USI and I2C peripherals.
>   - CMU_PERIC0/1 clocks are not marked as critical.
> 
> This has been tested on the Samsung Galaxy S20 FE (r8s),
> where USI and SPI interfaces are confirmed to be functional.
> 
> Denzeel Oliva (9):
>   dt-bindings: clock: samsung,exynos990-clock: add PERIC0 / 1 clock
>     management unit
>   dt-bindings: i2c: exynos5: add samsung,exynos990-hsi2c compatible
>   dt-bindings: serial: samsung: add Exynos990 compatible
>   dt-bindings: samsung: usi: add exynos990-usi compatible
>   spi: dt-bindings: samsung: add samsung,exynos990-spi compatible
>   dt-bindings: soc: samsung: exynos-sysreg: add compatibles peric0/1
>     sysreg for Exynos990
>   clk: samsung: exynos990: add support for CMU_PERIC0/1
>   spi: s3c64xx: add support exynos990-spi to new port config data
>   arm64: dts: exynos990: define all PERIC USI nodes
> 
>  .../clock/samsung,exynos990-clock.yaml        |   24 +
>  .../devicetree/bindings/i2c/i2c-exynos5.yaml  |    1 +
>  .../bindings/serial/samsung_uart.yaml         |    6 +
>  .../bindings/soc/samsung/exynos-usi.yaml      |    1 +
>  .../soc/samsung/samsung,exynos-sysreg.yaml    |    2 +
>  .../devicetree/bindings/spi/samsung,spi.yaml  |    1 +
>  arch/arm64/boot/dts/exynos/exynos990.dtsi     | 1711 +++++++++++++++++
>  drivers/clk/samsung/clk-exynos990.c           | 1079 +++++++++++
>  drivers/spi/spi-s3c64xx.c                     |   16 +
>  include/dt-bindings/clock/samsung,exynos990.h |  178 +-
>  10 files changed, 3018 insertions(+), 1 deletion(-)
> 
> --
> 2.47.1
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/exynos/' for 20250205222223.613-1-wachiturroxd150@gmail.com:

Error: arch/arm64/boot/dts/exynos/exynos990.dtsi:225.20-21 syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/exynos/exynos990-x1slte.dtb] Error 1
make[2]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos] Error 2
make[2]: Target 'arch/arm64/boot/dts/exynos/exynos990-x1slte.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1464: exynos/exynos990-x1slte.dtb] Error 2
Error: arch/arm64/boot/dts/exynos/exynos990.dtsi:225.20-21 syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/exynos/exynos990-r8s.dtb] Error 1
make[2]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos] Error 2
make[2]: Target 'arch/arm64/boot/dts/exynos/exynos990-r8s.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1464: exynos/exynos990-r8s.dtb] Error 2
Error: arch/arm64/boot/dts/exynos/exynos990.dtsi:225.20-21 syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/exynos/exynos990-c1s.dtb] Error 1
make[2]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos] Error 2
make[2]: Target 'arch/arm64/boot/dts/exynos/exynos990-c1s.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1464: exynos/exynos990-c1s.dtb] Error 2
Error: arch/arm64/boot/dts/exynos/exynos990.dtsi:225.20-21 syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/exynos/exynos990-x1s.dtb] Error 1
make[2]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos] Error 2
make[2]: Target 'arch/arm64/boot/dts/exynos/exynos990-x1s.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1464: exynos/exynos990-x1s.dtb] Error 2
make: *** [Makefile:251: __sub-make] Error 2
make: Target 'exynos/exynos8895-dreamlte.dtb' not remade because of errors.
make: Target 'exynos/exynos850-e850-96.dtb' not remade because of errors.
make: Target 'exynos/exynos7885-jackpotlte.dtb' not remade because of errors.
make: Target 'exynos/exynos990-x1slte.dtb' not remade because of errors.
make: Target 'exynos/exynos5433-tm2.dtb' not remade because of errors.
make: Target 'exynos/exynos990-r8s.dtb' not remade because of errors.
make: Target 'exynos/exynos7-espresso.dtb' not remade because of errors.
make: Target 'exynos/google/gs101-oriole.dtb' not remade because of errors.
make: Target 'exynos/exynosautov920-sadk.dtb' not remade because of errors.
make: Target 'exynos/exynosautov9-sadk.dtb' not remade because of errors.
make: Target 'exynos/exynos990-c1s.dtb' not remade because of errors.
make: Target 'exynos/exynos9810-starlte.dtb' not remade because of errors.
make: Target 'exynos/exynos990-x1s.dtb' not remade because of errors.
make: Target 'exynos/exynos5433-tm2e.dtb' not remade because of errors.







      parent reply	other threads:[~2025-02-07 15:34 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-05 22:22 [PATCH v1 0/9] Add PERIC0/1 support for Exynos 990 Denzeel Oliva
2025-02-05 22:22 ` [PATCH v1 1/9] dt-bindings: clock: samsung,exynos990-clock: add PERIC0/1 clock management unit Denzeel Oliva
2025-02-06  7:41   ` Krzysztof Kozlowski
2025-02-05 22:22 ` [PATCH v1 2/9] dt-bindings: i2c: exynos5: add samsung,exynos990-hsi2c compatible Denzeel Oliva
2025-02-06  7:41   ` Krzysztof Kozlowski
2025-02-05 22:22 ` [PATCH v1 3/9] dt-bindings: serial: samsung: add Exynos990 compatible Denzeel Oliva
2025-02-06  7:42   ` Krzysztof Kozlowski
2025-02-05 22:22 ` [PATCH v1 4/9] dt-bindings: samsung: usi: add exynos990-usi compatible Denzeel Oliva
2025-02-05 22:22 ` [PATCH v1 5/9] spi: dt-bindings: samsung: add samsung,exynos990-spi compatible Denzeel Oliva
2025-02-06  7:42   ` Krzysztof Kozlowski
2025-02-05 22:22 ` [PATCH v1 6/9] dt-bindings: soc: samsung: exynos-sysreg: add compatibles peric0/1 sysreg for Exynos990 Denzeel Oliva
2025-02-05 22:22 ` [PATCH v1 7/9] clk: samsung: exynos990: add support for CMU_PERIC0/1 Denzeel Oliva
2025-02-05 22:22 ` [PATCH v1 8/9] spi: s3c64xx: add support exynos990-spi to new port config data Denzeel Oliva
2025-02-05 22:22 ` [PATCH v1 9/9] arm64: dts: exynos990: define all PERIC USI nodes Denzeel Oliva
2025-02-08 19:18   ` Umer Uddin
     [not found]     ` <CABeP6EGt1vOyxbc=vnCjBSimERLTV5_QV5Ph8p3SP4vc_z2=nQ@mail.gmail.com>
2025-02-09 10:20       ` Krzysztof Kozlowski
2025-02-06  7:45 ` [PATCH v1 0/9] Add PERIC0/1 support for Exynos 990 Krzysztof Kozlowski
2025-02-07 15:21 ` Rob Herring (Arm) [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=173894150599.330679.9502300326719327262.robh@kernel.org \
    --to=robh@kernel.org \
    --cc=alim.akhtar@samsung.com \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=wachiturroxd150@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.