From: "Rob Herring (Arm)" <robh@kernel.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: krzk+dt@kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, conor+dt@kernel.org,
andersson@kernel.org, konradybcio@kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sa8775p: Add 'global' IRQ for PCIe controllers
Date: Mon, 10 Feb 2025 10:22:43 -0600 [thread overview]
Message-ID: <173920411963.477096.6458317590653327676.robh@kernel.org> (raw)
In-Reply-To: <20250209153940.3489-1-manivannan.sadhasivam@linaro.org>
On Sun, 09 Feb 2025 21:09:40 +0530, Manivannan Sadhasivam wrote:
> 'global' IRQ is used to receive vendor specific events from the PCIe
> controller.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250209153940.3489-1-manivannan.sadhasivam@linaro.org:
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: pcie@1c00000: interrupts: [[0, 307, 4], [0, 308, 4], [0, 309, 4], [0, 312, 4], [0, 313, 4], [0, 314, 4], [0, 374, 4], [0, 375, 4], [0, 306, 4]] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: pcie@1c00000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7', 'global'] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: pcie@1c10000: interrupts: [[0, 519, 4], [0, 140, 4], [0, 141, 4], [0, 142, 4], [0, 143, 4], [0, 144, 4], [0, 145, 4], [0, 146, 4], [0, 518, 4]] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: pcie@1c10000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7', 'global'] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: pcie@1c00000: interrupts: [[0, 307, 4], [0, 308, 4], [0, 309, 4], [0, 312, 4], [0, 313, 4], [0, 314, 4], [0, 374, 4], [0, 375, 4], [0, 306, 4]] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: pcie@1c00000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7', 'global'] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: pcie@1c10000: interrupts: [[0, 519, 4], [0, 140, 4], [0, 141, 4], [0, 142, 4], [0, 143, 4], [0, 144, 4], [0, 145, 4], [0, 146, 4], [0, 518, 4]] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: pcie@1c10000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7', 'global'] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: pcie@1c00000: interrupts: [[0, 307, 4], [0, 308, 4], [0, 309, 4], [0, 312, 4], [0, 313, 4], [0, 314, 4], [0, 374, 4], [0, 375, 4], [0, 306, 4]] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: pcie@1c00000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7', 'global'] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: pcie@1c10000: interrupts: [[0, 519, 4], [0, 140, 4], [0, 141, 4], [0, 142, 4], [0, 143, 4], [0, 144, 4], [0, 145, 4], [0, 146, 4], [0, 518, 4]] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: pcie@1c10000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7', 'global'] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: pcie@1c00000: interrupts: [[0, 307, 4], [0, 308, 4], [0, 309, 4], [0, 312, 4], [0, 313, 4], [0, 314, 4], [0, 374, 4], [0, 375, 4], [0, 306, 4]] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: pcie@1c00000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7', 'global'] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: pcie@1c10000: interrupts: [[0, 519, 4], [0, 140, 4], [0, 141, 4], [0, 142, 4], [0, 143, 4], [0, 144, 4], [0, 145, 4], [0, 146, 4], [0, 518, 4]] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: pcie@1c10000: interrupt-names: ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7', 'global'] is too long
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
next prev parent reply other threads:[~2025-02-10 16:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-09 15:39 [PATCH] arm64: dts: qcom: sa8775p: Add 'global' IRQ for PCIe controllers Manivannan Sadhasivam
2025-02-10 16:22 ` Rob Herring (Arm) [this message]
2025-02-10 16:58 ` Manivannan Sadhasivam
2025-02-10 17:55 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=173920411963.477096.6458317590653327676.robh@kernel.org \
--to=robh@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.