From: Heiko Stuebner <heiko@sntech.de>
To: architt@codeaurora.org
Cc: Jose.Abreu@synopsys.com, algea.cao@rock-chips.com,
linux-rockchip@lists.infradead.org, jonas@kwiboo.se,
dri-devel@lists.freedesktop.org,
Laurent.pinchart@ideasonboard.com,
linux-arm-kernel@lists.infradead.org, zhengyang@rock-chips.com
Subject: Re: [PATCH v5 0/6] drm/rockchip: hdmi support for rk3328
Date: Fri, 28 Sep 2018 13:14:03 +0200 [thread overview]
Message-ID: <1747873.4pnCHigBGG@phil> (raw)
In-Reply-To: <20180912124740.20343-1-heiko@sntech.de>
Am Mittwoch, 12. September 2018, 14:47:34 CEST schrieb Heiko Stuebner:
> The rk3228/rk3229 and rk3328 socs started using a new type of hdmi-phy
> from Innosilicon that resides completely separate from the dw-hdmi block
> and gets accessed via mmio.
>
> Additionally the rk3328 dw-hdmi does not report the vendor-phy type
> but a different one instead, so add the possibility to override the
> phy type when the glue driver knows better than the ip block itself.
>
> changes in v5:
> - disable CEC_5V option to make CEC actually work (Jonas)
>
> changes in v4:
> - rebased onto 4.19-rc2 - no actual changes
> - added Rob's Ack on the dw-hdmi compatible
>
> changes in v3:
> - split off phy driver into a separate series
> - only allow forcing vendor phy type
> - wording fixes and other nits
>
> changes in v2:
> - phy: prevent overflow in tmdsclk calculation
> as reported by Martin Cerveny
> - phy: use unsigned long for all tmdsclk rate uses
> - phy: simplify tmds rate calculation
> - dropped patch exporting some dw-hdmi phy functions
> as a similar patch entered drm-misc already
>
> Heiko Stuebner (6):
> drm/bridge: dw-hdmi: allow forcing vendor phy-type
> drm/rockchip: dw_hdmi: Allow outputs that don't need output switching
> dt-bindings: allow optional phys in Rockchip dw_hdmi binding
> drm/rockchip: dw_hdmi: allow including external phys
> drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data
> object
> drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328
applied to drm-misc-next with the received Reviews
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/6] drm/rockchip: hdmi support for rk3328
Date: Fri, 28 Sep 2018 13:14:03 +0200 [thread overview]
Message-ID: <1747873.4pnCHigBGG@phil> (raw)
In-Reply-To: <20180912124740.20343-1-heiko@sntech.de>
Am Mittwoch, 12. September 2018, 14:47:34 CEST schrieb Heiko Stuebner:
> The rk3228/rk3229 and rk3328 socs started using a new type of hdmi-phy
> from Innosilicon that resides completely separate from the dw-hdmi block
> and gets accessed via mmio.
>
> Additionally the rk3328 dw-hdmi does not report the vendor-phy type
> but a different one instead, so add the possibility to override the
> phy type when the glue driver knows better than the ip block itself.
>
> changes in v5:
> - disable CEC_5V option to make CEC actually work (Jonas)
>
> changes in v4:
> - rebased onto 4.19-rc2 - no actual changes
> - added Rob's Ack on the dw-hdmi compatible
>
> changes in v3:
> - split off phy driver into a separate series
> - only allow forcing vendor phy type
> - wording fixes and other nits
>
> changes in v2:
> - phy: prevent overflow in tmdsclk calculation
> as reported by Martin Cerveny
> - phy: use unsigned long for all tmdsclk rate uses
> - phy: simplify tmds rate calculation
> - dropped patch exporting some dw-hdmi phy functions
> as a similar patch entered drm-misc already
>
> Heiko Stuebner (6):
> drm/bridge: dw-hdmi: allow forcing vendor phy-type
> drm/rockchip: dw_hdmi: Allow outputs that don't need output switching
> dt-bindings: allow optional phys in Rockchip dw_hdmi binding
> drm/rockchip: dw_hdmi: allow including external phys
> drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data
> object
> drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328
applied to drm-misc-next with the received Reviews
next prev parent reply other threads:[~2018-09-28 11:14 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-12 12:47 [PATCH v5 0/6] drm/rockchip: hdmi support for rk3328 Heiko Stuebner
2018-09-12 12:47 ` Heiko Stuebner
2018-09-12 12:47 ` [PATCH v5 1/6] drm/bridge: dw-hdmi: allow forcing vendor phy-type Heiko Stuebner
2018-09-12 12:47 ` Heiko Stuebner
[not found] ` <1851d56f-b628-2d10-0da7-72c1075b2b9a@rock-chips.com>
2018-09-28 7:51 ` Zheng Yang
2018-09-28 7:51 ` Zheng Yang
2018-09-28 8:09 ` Andrzej Hajda
2018-09-28 8:09 ` Andrzej Hajda
2018-09-12 12:47 ` [PATCH v5 2/6] drm/rockchip: dw_hdmi: Allow outputs that don't need output switching Heiko Stuebner
2018-09-12 12:47 ` Heiko Stuebner
[not found] ` <6d4ee8b5-a1fa-23b7-88db-32b2c02833cb@rock-chips.com>
2018-09-28 7:52 ` Fwd: " Zheng Yang
2018-09-28 7:52 ` Zheng Yang
2018-09-12 12:47 ` [PATCH v5 3/6] dt-bindings: allow optional phys in Rockchip dw_hdmi binding Heiko Stuebner
2018-09-12 12:47 ` Heiko Stuebner
2018-09-12 12:47 ` [PATCH v5 4/6] drm/rockchip: dw_hdmi: allow including external phys Heiko Stuebner
2018-09-12 12:47 ` Heiko Stuebner
[not found] ` <4187b1f6-9682-6c3e-741e-0374e3e9165b@rock-chips.com>
2018-09-28 7:52 ` Fwd: " Zheng Yang
2018-09-28 7:52 ` Zheng Yang
2018-09-12 12:47 ` [PATCH v5 5/6] drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data object Heiko Stuebner
2018-09-12 12:47 ` Heiko Stuebner
[not found] ` <3a8b88a3-ec0c-cf39-0a97-a941068318c2@rock-chips.com>
2018-09-28 7:52 ` Fwd: " Zheng Yang
2018-09-28 7:52 ` Zheng Yang
2018-09-12 12:47 ` [PATCH v5 6/6] drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328 Heiko Stuebner
2018-09-12 12:47 ` Heiko Stuebner
[not found] ` <8ec9f7d2-069a-81e4-acf5-050d6b2094f7@rock-chips.com>
2018-09-28 7:52 ` Fwd: " Zheng Yang
2018-09-28 7:52 ` Zheng Yang
2018-09-28 11:14 ` Heiko Stuebner [this message]
2018-09-28 11:14 ` [PATCH v5 0/6] drm/rockchip: hdmi support for rk3328 Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1747873.4pnCHigBGG@phil \
--to=heiko@sntech.de \
--cc=Jose.Abreu@synopsys.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=algea.cao@rock-chips.com \
--cc=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jonas@kwiboo.se \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=zhengyang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.