From: patchwork-bot+linux-riscv@kernel.org
To: Hal Feng <hal.feng@starfivetech.com>
Cc: linux-riscv@lists.infradead.org, conor+dt@kernel.org,
robh@kernel.org, krzk+dt@kernel.org, palmer@dabbelt.com,
pjw@kernel.org, aou@eecs.berkeley.edu, rafael@kernel.org,
viresh.kumar@linaro.org, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, bhelgaas@google.com,
lgirdwood@gmail.com, broonie@kernel.org,
emil.renner.berthing@canonical.com,
heinrich.schuchardt@canonical.com, e@freeshell.de,
devicetree@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 0/6] Add support for StarFive VisionFive 2 Lite board
Date: Fri, 19 Dec 2025 08:09:54 +0000 [thread overview]
Message-ID: <176613179479.3684357.2451207324135136166.git-patchwork-notify@kernel.org> (raw)
In-Reply-To: <20251125075604.69370-1-hal.feng@starfivetech.com>
Hello:
This series was applied to riscv/linux.git (fixes)
by Conor Dooley <conor.dooley@microchip.com>:
On Tue, 25 Nov 2025 15:55:58 +0800 you wrote:
> VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S industrial
> SoC which can run at -40~85 degrees centigrade and up to 1.25GHz.
>
> Board features:
> - JH7110S SoC
> - 4/8 GiB LPDDR4 DRAM
> - AXP15060 PMIC
> - 40 pin GPIO header
> - 1x USB 3.0 host port
> - 3x USB 2.0 host port
> - 1x M.2 M-Key (size: 2242)
> - 1x MicroSD slot (optional non-removable 64GiB eMMC)
> - 1x QSPI Flash
> - 1x I2C EEPROM
> - 1x 1Gbps Ethernet port
> - SDIO-based Wi-Fi & UART-based Bluetooth
> - 1x HDMI port
> - 1x 2-lane DSI
> - 1x 2-lane CSI
>
> [...]
Here is the summary with links:
- [v4,1/6] PCI: starfive: Use regulator APIs instead of GPIO APIs to enable the 3V3 power supply of PCIe slots
(no matching commit)
- [v4,2/6] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board
https://git.kernel.org/riscv/c/7a1e15b248d6
- [v4,3/6] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts
https://git.kernel.org/riscv/c/84853940a733
- [v4,4/6] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants
https://git.kernel.org/riscv/c/2ad6d71a0de8
- [v4,5/6] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
https://git.kernel.org/riscv/c/900b32fd601b
- [v4,6/6] riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree
https://git.kernel.org/riscv/c/ae264ae12442
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
WARNING: multiple messages have this Message-ID (diff)
From: patchwork-bot+linux-riscv@kernel.org
To: Hal Feng <hal.feng@starfivetech.com>
Cc: linux-riscv@lists.infradead.org, conor+dt@kernel.org,
robh@kernel.org, krzk+dt@kernel.org, palmer@dabbelt.com,
pjw@kernel.org, aou@eecs.berkeley.edu, rafael@kernel.org,
viresh.kumar@linaro.org, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, bhelgaas@google.com,
lgirdwood@gmail.com, broonie@kernel.org,
emil.renner.berthing@canonical.com,
heinrich.schuchardt@canonical.com, e@freeshell.de,
devicetree@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 0/6] Add support for StarFive VisionFive 2 Lite board
Date: Fri, 19 Dec 2025 08:09:54 +0000 [thread overview]
Message-ID: <176613179479.3684357.2451207324135136166.git-patchwork-notify@kernel.org> (raw)
In-Reply-To: <20251125075604.69370-1-hal.feng@starfivetech.com>
Hello:
This series was applied to riscv/linux.git (fixes)
by Conor Dooley <conor.dooley@microchip.com>:
On Tue, 25 Nov 2025 15:55:58 +0800 you wrote:
> VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S industrial
> SoC which can run at -40~85 degrees centigrade and up to 1.25GHz.
>
> Board features:
> - JH7110S SoC
> - 4/8 GiB LPDDR4 DRAM
> - AXP15060 PMIC
> - 40 pin GPIO header
> - 1x USB 3.0 host port
> - 3x USB 2.0 host port
> - 1x M.2 M-Key (size: 2242)
> - 1x MicroSD slot (optional non-removable 64GiB eMMC)
> - 1x QSPI Flash
> - 1x I2C EEPROM
> - 1x 1Gbps Ethernet port
> - SDIO-based Wi-Fi & UART-based Bluetooth
> - 1x HDMI port
> - 1x 2-lane DSI
> - 1x 2-lane CSI
>
> [...]
Here is the summary with links:
- [v4,1/6] PCI: starfive: Use regulator APIs instead of GPIO APIs to enable the 3V3 power supply of PCIe slots
(no matching commit)
- [v4,2/6] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board
https://git.kernel.org/riscv/c/7a1e15b248d6
- [v4,3/6] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts
https://git.kernel.org/riscv/c/84853940a733
- [v4,4/6] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants
https://git.kernel.org/riscv/c/2ad6d71a0de8
- [v4,5/6] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
https://git.kernel.org/riscv/c/900b32fd601b
- [v4,6/6] riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree
https://git.kernel.org/riscv/c/ae264ae12442
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2025-12-19 8:13 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-25 7:55 [PATCH v4 0/6] Add support for StarFive VisionFive 2 Lite board Hal Feng
2025-11-25 7:55 ` Hal Feng
2025-11-25 7:55 ` [PATCH v4 1/6] PCI: starfive: Use regulator APIs instead of GPIO APIs to enable the 3V3 power supply of PCIe slots Hal Feng
2025-11-25 7:55 ` Hal Feng
2025-11-25 20:00 ` Conor Dooley
2025-11-25 20:00 ` Conor Dooley
2025-12-06 12:37 ` Matthias Brugger
2025-12-06 12:37 ` Matthias Brugger
2025-12-01 6:45 ` Hal Feng
2025-12-01 6:45 ` Hal Feng
2025-12-01 20:52 ` Bjorn Helgaas
2025-12-01 20:52 ` Bjorn Helgaas
2025-12-02 1:45 ` 回复: " Kevin Xie
2025-12-02 1:45 ` Kevin Xie
2025-12-02 3:02 ` Kevin Xie
2025-12-02 3:02 ` Kevin Xie
2025-12-02 3:16 ` Kevin Xie
2025-12-02 3:16 ` Kevin Xie
2025-12-02 16:31 ` Bjorn Helgaas
2025-12-02 16:31 ` Bjorn Helgaas
2025-12-04 13:19 ` Hal Feng
2025-12-04 13:19 ` Hal Feng
2025-12-02 3:38 ` Hal Feng
2025-12-02 3:38 ` Hal Feng
2025-11-25 7:56 ` [PATCH v4 2/6] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board Hal Feng
2025-11-25 7:56 ` Hal Feng
2025-11-25 7:56 ` [PATCH v4 3/6] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts Hal Feng
2025-11-25 7:56 ` Hal Feng
2025-11-25 7:56 ` [PATCH v4 4/6] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants Hal Feng
2025-11-25 7:56 ` Hal Feng
2025-12-04 17:05 ` Anand Moon
2025-12-04 17:05 ` Anand Moon
2025-12-05 7:23 ` Maud Spierings
2025-12-05 7:23 ` Maud Spierings
2025-12-05 7:30 ` E Shattow
2025-12-05 7:30 ` E Shattow
2025-12-05 7:41 ` Hal Feng
2025-12-05 7:41 ` Hal Feng
2025-12-05 8:01 ` Anand Moon
2025-12-05 8:01 ` Anand Moon
2025-11-25 7:56 ` [PATCH v4 5/6] riscv: dts: starfive: Add VisionFive 2 Lite board device tree Hal Feng
2025-11-25 7:56 ` Hal Feng
2025-11-26 1:44 ` E Shattow
2025-11-26 1:44 ` E Shattow
2025-11-25 7:56 ` [PATCH v4 6/6] riscv: dts: starfive: Add VisionFive 2 Lite eMMC " Hal Feng
2025-11-25 7:56 ` Hal Feng
2025-11-26 1:45 ` E Shattow
2025-11-26 1:45 ` E Shattow
2025-11-25 22:24 ` (subset) [PATCH v4 0/6] Add support for StarFive VisionFive 2 Lite board Conor Dooley
2025-12-19 8:09 ` patchwork-bot+linux-riscv [this message]
2025-12-19 8:09 ` patchwork-bot+linux-riscv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=176613179479.3684357.2451207324135136166.git-patchwork-notify@kernel.org \
--to=patchwork-bot+linux-riscv@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=e@freeshell.de \
--cc=emil.renner.berthing@canonical.com \
--cc=hal.feng@starfivetech.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.