All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Péter Ujfalusi" <peter.ujfalusi@ti.com>
To: "Girdwood, Liam" <lrg@ti.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Tony Lindgren <tony@atomide.com>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
Subject: Re: [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes
Date: Mon, 27 Jun 2011 12:43:57 +0300	[thread overview]
Message-ID: <1770658.gTOGV79JgY@barack> (raw)
In-Reply-To: <1308663556-29120-1-git-send-email-peter.ujfalusi@ti.com>

Hi Tony, Samuel,

Would you have time to take a look at this series?

Thanks,
Péter

On Tuesday 21 June 2011 15:38:58 Ujfalusi, Peter wrote:
> Hello,
> 
> Changes since v5:
> - Use alloc_workqueue in the twl6040-vibra driver (comment from Tejun Heo)
> - Allow user to change the headset power mode, but if the change is not
> allowed by the use case the change is not written to the HW (comment from
> Mark Brown)
> 
> Mark: I have added your acks for the patches, except for patch 15, where you
> requested a change.
> 
> Intro message from the v5 series:
> The series will do five major things, and they are in one series, because
> they pretty much depending on each other, so it is easier to handle them
> together.
> 
> 1. Move the common pmic related configurations out from the board files.
> New twl-common.c/h file has been created for this purpose.
> OMAP3 board files received two patches (pdata, and regualtor changes), OMAP4
> board files has been changed with one patch.
> 
> 2. Rename the twl4030-codec MFD driver to twl4030-audio
> Since the ASoC multicomponent introduction (2.6.37) the twl4030-codec MFD
> dirver had been using twl4030-audio to register (twl4030-codec is the ASoC
> codec driver). The documentation refers to this part of twl as audio block,
> so it is better to rename the driver as well to avoid confusion.
> 
> 3. Introduction of MFD driver for twl6040.
> The TWL6040 audio IC has codec and vibra functionality.
> Convert the existing ASoC codec driver to use the new MFD driver's
> interface.
> 
> 4. Vibrator driver for TWL6040 (Input/ForceFeedback driver)
> The driver itself, and support for the vibrators in SDP4430 board.
> 
> 5. Updates for twl6040 ASoC codec driver
> HS ramp configuration, new ABE dais, updated sample rate constraints,
> SDP4430 configuration.
> 
> Regards,
> Peter
> 
> ---
> Axel Castaneda Gonzalez (1):
>   ASoC: twl6040: Configure ramp step based on platform
> 
> Liam Girdwood (3):
>   ASoC: twl6040: add all ABE DAIs
>   ASoC: twl6040: Support other sample rates in constraints.
>   ASoC: twl6040: set default constraints.
> 
> Misael Lopez Cruz (5):
>   mfd: twl6040: Add initial support
>   ASoC: twl6040: Convert into TWL6040 MFD child
>   input: Add initial support for TWL6040 vibrator
>   ASoC: twl6040: Remove pll and headset mode dependency
>   OMAP4: SDP4430: Add twl6040 codec platform support
> 
> Peter Ujfalusi (9):
>   OMAP: New twl-common for common TWL configuration
>   OMAP4: Move common twl6030 configuration to twl-common
>   OMAP3: Move common twl configuration to twl-common
>   OMAP3: Move common regulator configuration to twl-common
>   MFD: twl4030-codec: Rename internals from codec to audio
>   MFD: twl4030-codec -> twl4030-audio: Rename the driver
>   MFD: twl4030-audio: Rename platform data
>   MFD: twl6040: Change platform data for soc codec driver
>   OMAP4: SDP4430: Add twl6040 vibrator platform support
> 
>  arch/arm/mach-omap2/Makefile                       |    2 +-
>  arch/arm/mach-omap2/board-3430sdp.c                |   89 +---
>  arch/arm/mach-omap2/board-4430sdp.c                |  187 ++----
>  arch/arm/mach-omap2/board-cm-t35.c                 |   48 +--
>  arch/arm/mach-omap2/board-devkit8000.c             |   37 +--
>  arch/arm/mach-omap2/board-igep0020.c               |   44 +--
>  arch/arm/mach-omap2/board-ldp.c                    |   15 +-
>  arch/arm/mach-omap2/board-omap3beagle.c            |   60 +--
>  arch/arm/mach-omap2/board-omap3evm.c               |   67 +--
>  arch/arm/mach-omap2/board-omap3pandora.c           |   59 +--
>  arch/arm/mach-omap2/board-omap3stalker.c           |   70 +--
>  arch/arm/mach-omap2/board-omap3touchbook.c         |   57 +--
>  arch/arm/mach-omap2/board-omap4panda.c             |  149 +-----
>  arch/arm/mach-omap2/board-overo.c                  |   59 +--
>  arch/arm/mach-omap2/board-rm680.c                  |    8 +-
>  arch/arm/mach-omap2/board-rx51-peripherals.c       |   44 +--
>  arch/arm/mach-omap2/board-zoom-peripherals.c       |   88 +---
>  arch/arm/mach-omap2/common-board-devices.c         |   21 -
>  arch/arm/mach-omap2/common-board-devices.h         |   26 +-
>  arch/arm/mach-omap2/twl-common.c                   |  304 ++++++++++
>  arch/arm/mach-omap2/twl-common.h                   |   59 ++
>  arch/arm/plat-omap/include/plat/irqs.h             |   12 +-
>  drivers/input/misc/Kconfig                         |   13 +-
>  drivers/input/misc/Makefile                        |    1 +
>  drivers/input/misc/twl4030-vibra.c                 |   12 +-
>  drivers/input/misc/twl6040-vibra.c                 |  416 +++++++++++++
>  drivers/mfd/Kconfig                                |    8 +-
>  drivers/mfd/Makefile                               |    3 +-
>  drivers/mfd/twl-core.c                             |   13 +-
>  drivers/mfd/twl4030-audio.c                        |  277 +++++++++
>  drivers/mfd/twl4030-codec.c                        |  277 ---------
>  drivers/mfd/twl6040-core.c                         |  601
> +++++++++++++++++++ drivers/mfd/twl6040-irq.c                          | 
> 205 +++++++ include/linux/i2c/twl.h                            |   25 +-
>  .../linux/mfd/{twl4030-codec.h => twl4030-audio.h} |   16 +-
>  include/linux/mfd/twl6040.h                        |  261 ++++++++
>  sound/soc/codecs/Kconfig                           |    3 +-
>  sound/soc/codecs/twl4030.c                         |   22 +-
>  sound/soc/codecs/twl6040.c                         |  628
> ++++++++------------ sound/soc/codecs/twl6040.h                         | 
> 118 ----
>  sound/soc/omap/sdp3430.c                           |    2 +-
>  sound/soc/omap/sdp4430.c                           |    2 +
>  sound/soc/omap/zoom2.c                             |    2 +-
>  43 files changed, 2635 insertions(+), 1775 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/twl-common.c
>  create mode 100644 arch/arm/mach-omap2/twl-common.h
>  create mode 100644 drivers/input/misc/twl6040-vibra.c
>  create mode 100644 drivers/mfd/twl4030-audio.c
>  delete mode 100644 drivers/mfd/twl4030-codec.c
>  create mode 100644 drivers/mfd/twl6040-core.c
>  create mode 100644 drivers/mfd/twl6040-irq.c
>  rename include/linux/mfd/{twl4030-codec.h => twl4030-audio.h} (96%)
>  create mode 100644 include/linux/mfd/twl6040.h

WARNING: multiple messages have this Message-ID (diff)
From: "Péter Ujfalusi" <peter.ujfalusi@ti.com>
To: "Girdwood, Liam" <lrg@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Subject: Re: [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes
Date: Mon, 27 Jun 2011 12:43:57 +0300	[thread overview]
Message-ID: <1770658.gTOGV79JgY@barack> (raw)
In-Reply-To: <1308663556-29120-1-git-send-email-peter.ujfalusi@ti.com>

Hi Tony, Samuel,

Would you have time to take a look at this series?

Thanks,
Péter

On Tuesday 21 June 2011 15:38:58 Ujfalusi, Peter wrote:
> Hello,
> 
> Changes since v5:
> - Use alloc_workqueue in the twl6040-vibra driver (comment from Tejun Heo)
> - Allow user to change the headset power mode, but if the change is not
> allowed by the use case the change is not written to the HW (comment from
> Mark Brown)
> 
> Mark: I have added your acks for the patches, except for patch 15, where you
> requested a change.
> 
> Intro message from the v5 series:
> The series will do five major things, and they are in one series, because
> they pretty much depending on each other, so it is easier to handle them
> together.
> 
> 1. Move the common pmic related configurations out from the board files.
> New twl-common.c/h file has been created for this purpose.
> OMAP3 board files received two patches (pdata, and regualtor changes), OMAP4
> board files has been changed with one patch.
> 
> 2. Rename the twl4030-codec MFD driver to twl4030-audio
> Since the ASoC multicomponent introduction (2.6.37) the twl4030-codec MFD
> dirver had been using twl4030-audio to register (twl4030-codec is the ASoC
> codec driver). The documentation refers to this part of twl as audio block,
> so it is better to rename the driver as well to avoid confusion.
> 
> 3. Introduction of MFD driver for twl6040.
> The TWL6040 audio IC has codec and vibra functionality.
> Convert the existing ASoC codec driver to use the new MFD driver's
> interface.
> 
> 4. Vibrator driver for TWL6040 (Input/ForceFeedback driver)
> The driver itself, and support for the vibrators in SDP4430 board.
> 
> 5. Updates for twl6040 ASoC codec driver
> HS ramp configuration, new ABE dais, updated sample rate constraints,
> SDP4430 configuration.
> 
> Regards,
> Peter
> 
> ---
> Axel Castaneda Gonzalez (1):
>   ASoC: twl6040: Configure ramp step based on platform
> 
> Liam Girdwood (3):
>   ASoC: twl6040: add all ABE DAIs
>   ASoC: twl6040: Support other sample rates in constraints.
>   ASoC: twl6040: set default constraints.
> 
> Misael Lopez Cruz (5):
>   mfd: twl6040: Add initial support
>   ASoC: twl6040: Convert into TWL6040 MFD child
>   input: Add initial support for TWL6040 vibrator
>   ASoC: twl6040: Remove pll and headset mode dependency
>   OMAP4: SDP4430: Add twl6040 codec platform support
> 
> Peter Ujfalusi (9):
>   OMAP: New twl-common for common TWL configuration
>   OMAP4: Move common twl6030 configuration to twl-common
>   OMAP3: Move common twl configuration to twl-common
>   OMAP3: Move common regulator configuration to twl-common
>   MFD: twl4030-codec: Rename internals from codec to audio
>   MFD: twl4030-codec -> twl4030-audio: Rename the driver
>   MFD: twl4030-audio: Rename platform data
>   MFD: twl6040: Change platform data for soc codec driver
>   OMAP4: SDP4430: Add twl6040 vibrator platform support
> 
>  arch/arm/mach-omap2/Makefile                       |    2 +-
>  arch/arm/mach-omap2/board-3430sdp.c                |   89 +---
>  arch/arm/mach-omap2/board-4430sdp.c                |  187 ++----
>  arch/arm/mach-omap2/board-cm-t35.c                 |   48 +--
>  arch/arm/mach-omap2/board-devkit8000.c             |   37 +--
>  arch/arm/mach-omap2/board-igep0020.c               |   44 +--
>  arch/arm/mach-omap2/board-ldp.c                    |   15 +-
>  arch/arm/mach-omap2/board-omap3beagle.c            |   60 +--
>  arch/arm/mach-omap2/board-omap3evm.c               |   67 +--
>  arch/arm/mach-omap2/board-omap3pandora.c           |   59 +--
>  arch/arm/mach-omap2/board-omap3stalker.c           |   70 +--
>  arch/arm/mach-omap2/board-omap3touchbook.c         |   57 +--
>  arch/arm/mach-omap2/board-omap4panda.c             |  149 +-----
>  arch/arm/mach-omap2/board-overo.c                  |   59 +--
>  arch/arm/mach-omap2/board-rm680.c                  |    8 +-
>  arch/arm/mach-omap2/board-rx51-peripherals.c       |   44 +--
>  arch/arm/mach-omap2/board-zoom-peripherals.c       |   88 +---
>  arch/arm/mach-omap2/common-board-devices.c         |   21 -
>  arch/arm/mach-omap2/common-board-devices.h         |   26 +-
>  arch/arm/mach-omap2/twl-common.c                   |  304 ++++++++++
>  arch/arm/mach-omap2/twl-common.h                   |   59 ++
>  arch/arm/plat-omap/include/plat/irqs.h             |   12 +-
>  drivers/input/misc/Kconfig                         |   13 +-
>  drivers/input/misc/Makefile                        |    1 +
>  drivers/input/misc/twl4030-vibra.c                 |   12 +-
>  drivers/input/misc/twl6040-vibra.c                 |  416 +++++++++++++
>  drivers/mfd/Kconfig                                |    8 +-
>  drivers/mfd/Makefile                               |    3 +-
>  drivers/mfd/twl-core.c                             |   13 +-
>  drivers/mfd/twl4030-audio.c                        |  277 +++++++++
>  drivers/mfd/twl4030-codec.c                        |  277 ---------
>  drivers/mfd/twl6040-core.c                         |  601
> +++++++++++++++++++ drivers/mfd/twl6040-irq.c                          | 
> 205 +++++++ include/linux/i2c/twl.h                            |   25 +-
>  .../linux/mfd/{twl4030-codec.h => twl4030-audio.h} |   16 +-
>  include/linux/mfd/twl6040.h                        |  261 ++++++++
>  sound/soc/codecs/Kconfig                           |    3 +-
>  sound/soc/codecs/twl4030.c                         |   22 +-
>  sound/soc/codecs/twl6040.c                         |  628
> ++++++++------------ sound/soc/codecs/twl6040.h                         | 
> 118 ----
>  sound/soc/omap/sdp3430.c                           |    2 +-
>  sound/soc/omap/sdp4430.c                           |    2 +
>  sound/soc/omap/zoom2.c                             |    2 +-
>  43 files changed, 2635 insertions(+), 1775 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/twl-common.c
>  create mode 100644 arch/arm/mach-omap2/twl-common.h
>  create mode 100644 drivers/input/misc/twl6040-vibra.c
>  create mode 100644 drivers/mfd/twl4030-audio.c
>  delete mode 100644 drivers/mfd/twl4030-codec.c
>  create mode 100644 drivers/mfd/twl6040-core.c
>  create mode 100644 drivers/mfd/twl6040-irq.c
>  rename include/linux/mfd/{twl4030-codec.h => twl4030-audio.h} (96%)
>  create mode 100644 include/linux/mfd/twl6040.h


  parent reply	other threads:[~2011-06-27  9:44 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-21 13:38 [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes Peter Ujfalusi
2011-06-21 13:38 ` Peter Ujfalusi
2011-06-21 13:38 ` [PATCH v6 01/18] OMAP: New twl-common for common TWL configuration Peter Ujfalusi
2011-06-21 13:38   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 02/18] OMAP4: Move common twl6030 configuration to twl-common Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 03/18] OMAP3: Move common twl " Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 04/18] OMAP3: Move common regulator " Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 05/18] MFD: twl4030-codec: Rename internals from codec to audio Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 06/18] MFD: twl4030-codec -> twl4030-audio: Rename the driver Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 07/18] MFD: twl4030-audio: Rename platform data Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 08/18] mfd: twl6040: Add initial support Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-07-04 11:48   ` Samuel Ortiz
2011-07-04 13:11     ` Péter Ujfalusi
2011-07-04 13:11       ` Péter Ujfalusi
2011-07-04 14:08     ` Péter Ujfalusi
2011-07-04 14:08       ` Péter Ujfalusi
2011-07-04 17:39       ` Samuel Ortiz
2011-07-04 17:39         ` Samuel Ortiz
2011-07-05  9:28         ` Péter Ujfalusi
2011-07-05  9:28           ` Re: " Péter Ujfalusi
2011-07-04 12:53   ` Felipe Balbi
2011-07-04 13:09     ` Péter Ujfalusi
2011-07-04 13:09       ` Péter Ujfalusi
2011-07-04 13:27       ` Felipe Balbi
2011-06-21 13:39 ` [PATCH v6 09/18] ASoC: twl6040: Convert into TWL6040 MFD child Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 10/18] MFD: twl6040: Change platform data for soc codec driver Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 11/18] input: Add initial support for TWL6040 vibrator Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 20:32   ` Dmitry Torokhov
2011-06-22 11:37     ` Péter Ujfalusi
2011-06-22 11:37       ` Péter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 12/18] OMAP4: SDP4430: Add twl6040 vibrator platform support Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 13/18] ASoC: twl6040: add all ABE DAIs Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 14/18] ASoC: twl6040: Support other sample rates in constraints Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 15/18] ASoC: twl6040: Remove pll and headset mode dependency Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 17:35   ` Mark Brown
2011-06-22 11:39     ` Péter Ujfalusi
2011-06-22 11:39       ` Péter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 16/18] ASoC: twl6040: set default constraints Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 17/18] ASoC: twl6040: Configure ramp step based on platform Peter Ujfalusi
2011-06-21 13:39   ` Peter Ujfalusi
2011-06-22 11:25 ` [PATCH v6 18/18] OMAP4: SDP4430: Add twl6040 codec platform support Peter Ujfalusi
2011-06-22 11:25   ` Peter Ujfalusi
2011-06-27  9:43 ` Péter Ujfalusi [this message]
2011-06-27  9:43   ` [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes Péter Ujfalusi
2011-06-27 10:18   ` Tony Lindgren
2011-06-27 10:18     ` Tony Lindgren
2011-06-27 14:30     ` Péter Ujfalusi
2011-06-27 14:30       ` Péter Ujfalusi
2011-06-28  6:17       ` Tony Lindgren
2011-06-28  6:17         ` Tony Lindgren
2011-06-28  6:44         ` Péter Ujfalusi
2011-06-28  6:44           ` Re: " Péter Ujfalusi
2011-06-28  6:50           ` Tony Lindgren
2011-06-28  6:50             ` Re: " Tony Lindgren
2011-07-04 11:51         ` Samuel Ortiz
2011-07-04 11:51           ` Samuel Ortiz
2011-06-30  6:15   ` Péter Ujfalusi
2011-06-30  6:15     ` Re: [alsa-devel] " Péter Ujfalusi
2011-06-30  8:04     ` Samuel Ortiz
2011-06-30  8:04       ` Samuel Ortiz
2011-06-30  9:41       ` Péter Ujfalusi
2011-06-30  9:41         ` Péter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1770658.gTOGV79JgY@barack \
    --to=peter.ujfalusi@ti.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lrg@ti.com \
    --cc=sameo@linux.intel.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.