From: patchwork-bot+netdevbpf@kernel.org
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: netdev@vger.kernel.org, davem@davemloft.net, kuba@kernel.org,
linux-can@vger.kernel.org, kernel@pengutronix.de,
claudiu.beznea.uj@bp.renesas.com, robh@kernel.org,
geert+renesas@glider.be
Subject: Re: [PATCH net-next 01/12] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC
Date: Thu, 12 Nov 2026 18:30:17 +0000 [thread overview]
Message-ID: <179450821702.579048.3144753075880171787.git-patchwork-notify@kernel.org> (raw)
In-Reply-To: <20261110115112.3807247-2-mkl@pengutronix.de>
Hello:
This series was applied to netdev/net-next.git (main)
by Marc Kleine-Budde <mkl@pengutronix.de>:
On Tue, 10 Nov 2026 12:41:24 +0100 you wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> The CAN FD controller found on the Renesas RZ/G3S SoC is largely compatible
> with the variant present on the RZ/G3E SoC. The main differences are:
> - the RZ/G3S provides only two CAN FD channels
> - the RZ/G3S supports only CAN FD operation; the Channel n CAN FD
> Configuration Register does not implement the bits used to select
> classical CAN-only mode (bit 30) or CAN FD-only mode (bit 28);
> consequently, bit 31 (CAN FD Frame Distinction Enable) of the same
> register is also not implemented
> - some bits in several registers (mainly reserved or status bits) are
> read-write on the RZ/G3S but read-only on the RZ/G3E; their behavior is
> otherwise identical: the bits read back as 0 on both SoCs and software
> is allowed to write only 0 to them on the RZ/G3S
> - the RZ/G3S provides 256 acceptance filters, compared to 768 on the
> RZ/G3E
> - the RZ/G3S can use PCLK clock as the CAN FD clock source through an
> internal clock divider, while also supporting an external CAN FD clock
> source
>
> [...]
Here is the summary with links:
- [net-next,01/12] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC
https://git.kernel.org/netdev/net-next/c/7aa321a595e2
- [net-next,02/12] can: rcar_canfd: Fix typos in macro names
https://git.kernel.org/netdev/net-next/c/79d4ac8cc434
- [net-next,03/12] can: rcar_canfd: Allow the CAN FD clock to be sourced from fck
https://git.kernel.org/netdev/net-next/c/b40631d86a8d
- [net-next,04/12] can: rcar_canfd: Do not set registers selecting the CAN mode
https://git.kernel.org/netdev/net-next/c/a2af960288df
- [net-next,05/12] can: rcar_canfd: Add support for Renesas RZ/G3S
https://git.kernel.org/netdev/net-next/c/32e8a013243c
- [net-next,06/12] can: rcar_canfd: Check can_clk request for errors
https://git.kernel.org/netdev/net-next/c/0deb654e2b6b
- [net-next,07/12] can: rcar_canfd: Use DT clock names in the probe message
https://git.kernel.org/netdev/net-next/c/6a6c71a03d5a
- [net-next,08/12] dt-bindings: can: renesas,rcar-canfd: Restrict resets in top-level
https://git.kernel.org/netdev/net-next/c/3696939f7cb5
- [net-next,09/12] dt-bindings: can: renesas,rcar-canfd: Simplify renesas,no-can-fd description
https://git.kernel.org/netdev/net-next/c/aecb16f09db9
- [net-next,10/12] can: rcar_canfd: Document that RZ/G3S has no Classical CAN mode
https://git.kernel.org/netdev/net-next/c/7a5305fb26cd
- [net-next,11/12] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3L SoC
https://git.kernel.org/netdev/net-next/c/0e890f327d8d
- [net-next,12/12] can: rcar_canfd: Add support for Renesas RZ/G3L
https://git.kernel.org/netdev/net-next/c/aa56fb023365
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
next prev parent reply other threads:[~2026-11-12 18:30 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 11:41 [PATCH net-next 0/12] pull-request: can-next 2026-11-10 Marc Kleine-Budde
2026-11-10 11:41 ` [PATCH net-next 01/12] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC Marc Kleine-Budde
2026-11-11 11:51 ` sashiko-bot
2026-11-11 12:20 ` netdev-bot+sashiko
2026-11-12 18:30 ` patchwork-bot+netdevbpf [this message]
2026-11-10 11:41 ` [PATCH net-next 02/12] can: rcar_canfd: Fix typos in macro names Marc Kleine-Budde
2026-11-11 11:51 ` sashiko-bot
2026-11-10 11:41 ` [PATCH net-next 03/12] can: rcar_canfd: Allow the CAN FD clock to be sourced from fck Marc Kleine-Budde
2026-11-11 11:51 ` sashiko-bot
2026-11-11 12:20 ` netdev-bot+sashiko
2026-11-10 11:41 ` [PATCH net-next 04/12] can: rcar_canfd: Do not set registers selecting the CAN mode Marc Kleine-Budde
2026-11-10 11:41 ` [PATCH net-next 05/12] can: rcar_canfd: Add support for Renesas RZ/G3S Marc Kleine-Budde
2026-11-11 12:20 ` netdev-bot+sashiko
2026-11-10 11:41 ` [PATCH net-next 06/12] can: rcar_canfd: Check can_clk request for errors Marc Kleine-Budde
2026-11-11 12:20 ` netdev-bot+sashiko
2026-11-10 11:41 ` [PATCH net-next 07/12] can: rcar_canfd: Use DT clock names in the probe message Marc Kleine-Budde
2026-11-11 11:51 ` sashiko-bot
2026-11-11 12:01 ` Marc Kleine-Budde
2026-11-12 12:25 ` Marc Kleine-Budde
2026-11-12 13:39 ` claudiu beznea
2026-11-12 13:44 ` Marc Kleine-Budde
2026-11-12 18:20 ` Jakub Kicinski
2026-11-11 12:20 ` netdev-bot+sashiko
2026-11-10 11:41 ` [PATCH net-next 08/12] dt-bindings: can: renesas,rcar-canfd: Restrict resets in top-level Marc Kleine-Budde
2026-11-11 11:51 ` sashiko-bot
2026-11-11 12:20 ` netdev-bot+sashiko
2026-11-10 11:41 ` [PATCH net-next 09/12] dt-bindings: can: renesas,rcar-canfd: Simplify renesas,no-can-fd description Marc Kleine-Budde
2026-11-10 11:41 ` [PATCH net-next 10/12] can: rcar_canfd: Document that RZ/G3S has no Classical CAN mode Marc Kleine-Budde
2026-11-11 12:20 ` netdev-bot+sashiko
2026-11-10 11:41 ` [PATCH net-next 11/12] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3L SoC Marc Kleine-Budde
2026-11-11 11:51 ` sashiko-bot
2026-11-11 12:20 ` netdev-bot+sashiko
2026-11-10 11:41 ` [PATCH net-next 12/12] can: rcar_canfd: Add support for Renesas RZ/G3L Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=179450821702.579048.3144753075880171787.git-patchwork-notify@kernel.org \
--to=patchwork-bot+netdevbpf@kernel.org \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=davem@davemloft.net \
--cc=geert+renesas@glider.be \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.