[PATCH v1 0/3]

[PATCH v1 0/3]

[Yifeng Zhao]

Add Naneng combo PHY support for RK3568

This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.



Yifeng Zhao (3):
  dt-bindings: phy: rockchip: Add Naneng combo PHY bindings
  phy/rockchip: add naneng combo phy for RK3568
  arm64: dts: rockchip: add naneng combo phy nodes for rk3568

 .../phy/phy-rockchip-naneng-combphy.yaml      | 100 +++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  68 ++
 drivers/phy/rockchip/Kconfig                  |   8 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
 5 files changed, 823 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c

-- 
2.17.1




-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v1 0/3]

[Yifeng Zhao]

Add Naneng combo PHY support for RK3568

This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.



Yifeng Zhao (3):
  dt-bindings: phy: rockchip: Add Naneng combo PHY bindings
  phy/rockchip: add naneng combo phy for RK3568
  arm64: dts: rockchip: add naneng combo phy nodes for rk3568

 .../phy/phy-rockchip-naneng-combphy.yaml      | 100 +++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  68 ++
 drivers/phy/rockchip/Kconfig                  |   8 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
 5 files changed, 823 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c

-- 
2.17.1

[PATCH v1 0/3]

[Yifeng Zhao]

Add Naneng combo PHY support for RK3568

This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.



Yifeng Zhao (3):
  dt-bindings: phy: rockchip: Add Naneng combo PHY bindings
  phy/rockchip: add naneng combo phy for RK3568
  arm64: dts: rockchip: add naneng combo phy nodes for rk3568

 .../phy/phy-rockchip-naneng-combphy.yaml      | 100 +++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  68 ++
 drivers/phy/rockchip/Kconfig                  |   8 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
 5 files changed, 823 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c

-- 
2.17.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 0/3]

[Yifeng Zhao]

Add Naneng combo PHY support for RK3568

This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.



Yifeng Zhao (3):
  dt-bindings: phy: rockchip: Add Naneng combo PHY bindings
  phy/rockchip: add naneng combo phy for RK3568
  arm64: dts: rockchip: add naneng combo phy nodes for rk3568

 .../phy/phy-rockchip-naneng-combphy.yaml      | 100 +++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  68 ++
 drivers/phy/rockchip/Kconfig                  |   8 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
 5 files changed, 823 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c

-- 
2.17.1




_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v1 1/3] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Yifeng Zhao]

Add the compatible strings for the Naneng combo PHY found on rockchip SoC.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 .../phy/phy-rockchip-naneng-combphy.yaml      | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
new file mode 100644
index 000000000000..69908614609c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Naneng Combo Phy Device Tree Bindings
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-naneng-combphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: reference clock
+      - description: apb clock
+      - description: pipe clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: apb
+      - const: pipe
+
+  '#phy-cells':
+    const: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: exclusive apb reset line
+      - description: exclusive PHY reset line
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: combphy-apb
+      - const: combphy
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are access through GRF regs.
+
+  rockchip,pipe-phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional pipe settings are access through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+  - resets
+  - reset-names
+  - rockchip,pipe-grf
+  - rockchip,pipe-phy-grf
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/rk3568-cru.h>
+
+    pipegrf: syscon@fdc50000 {
+      compatible = "rockchip,rk3568-pipegrf", "syscon";
+      reg = <0xfdc50000 0x1000>;
+    };
+
+    pipe_phy_grf0: syscon@fdc70000 {
+      compatible = "rockchip,pipe-phy-grf", "syscon";
+      reg = <0xfdc70000 0x1000>;
+    };
+
+    combphy0_us: phy@fe820000 {
+      compatible = "rockchip,rk3568-naneng-combphy";
+      reg = <0xfe820000 0x100>;
+      #phy-cells = <1>;
+      clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
+        <&cru PCLK_PIPE>;
+      clock-names = "ref", "apb", "pipe";
+      assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+      assigned-clock-rates = <100000000>;
+      resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+      reset-names = "combphy-apb", "combphy";
+      rockchip,pipe-grf = <&pipegrf>;
+      rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+    };
-- 
2.17.1




-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v1 1/3] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Yifeng Zhao]

Add the compatible strings for the Naneng combo PHY found on rockchip SoC.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 .../phy/phy-rockchip-naneng-combphy.yaml      | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
new file mode 100644
index 000000000000..69908614609c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Naneng Combo Phy Device Tree Bindings
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-naneng-combphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: reference clock
+      - description: apb clock
+      - description: pipe clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: apb
+      - const: pipe
+
+  '#phy-cells':
+    const: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: exclusive apb reset line
+      - description: exclusive PHY reset line
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: combphy-apb
+      - const: combphy
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are access through GRF regs.
+
+  rockchip,pipe-phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional pipe settings are access through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+  - resets
+  - reset-names
+  - rockchip,pipe-grf
+  - rockchip,pipe-phy-grf
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/rk3568-cru.h>
+
+    pipegrf: syscon@fdc50000 {
+      compatible = "rockchip,rk3568-pipegrf", "syscon";
+      reg = <0xfdc50000 0x1000>;
+    };
+
+    pipe_phy_grf0: syscon@fdc70000 {
+      compatible = "rockchip,pipe-phy-grf", "syscon";
+      reg = <0xfdc70000 0x1000>;
+    };
+
+    combphy0_us: phy@fe820000 {
+      compatible = "rockchip,rk3568-naneng-combphy";
+      reg = <0xfe820000 0x100>;
+      #phy-cells = <1>;
+      clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
+        <&cru PCLK_PIPE>;
+      clock-names = "ref", "apb", "pipe";
+      assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+      assigned-clock-rates = <100000000>;
+      resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+      reset-names = "combphy-apb", "combphy";
+      rockchip,pipe-grf = <&pipegrf>;
+      rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+    };
-- 
2.17.1

[PATCH v1 1/3] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Yifeng Zhao]

Add the compatible strings for the Naneng combo PHY found on rockchip SoC.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 .../phy/phy-rockchip-naneng-combphy.yaml      | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
new file mode 100644
index 000000000000..69908614609c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Naneng Combo Phy Device Tree Bindings
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-naneng-combphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: reference clock
+      - description: apb clock
+      - description: pipe clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: apb
+      - const: pipe
+
+  '#phy-cells':
+    const: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: exclusive apb reset line
+      - description: exclusive PHY reset line
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: combphy-apb
+      - const: combphy
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are access through GRF regs.
+
+  rockchip,pipe-phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional pipe settings are access through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+  - resets
+  - reset-names
+  - rockchip,pipe-grf
+  - rockchip,pipe-phy-grf
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/rk3568-cru.h>
+
+    pipegrf: syscon@fdc50000 {
+      compatible = "rockchip,rk3568-pipegrf", "syscon";
+      reg = <0xfdc50000 0x1000>;
+    };
+
+    pipe_phy_grf0: syscon@fdc70000 {
+      compatible = "rockchip,pipe-phy-grf", "syscon";
+      reg = <0xfdc70000 0x1000>;
+    };
+
+    combphy0_us: phy@fe820000 {
+      compatible = "rockchip,rk3568-naneng-combphy";
+      reg = <0xfe820000 0x100>;
+      #phy-cells = <1>;
+      clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
+        <&cru PCLK_PIPE>;
+      clock-names = "ref", "apb", "pipe";
+      assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+      assigned-clock-rates = <100000000>;
+      resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+      reset-names = "combphy-apb", "combphy";
+      rockchip,pipe-grf = <&pipegrf>;
+      rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+    };
-- 
2.17.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 1/3] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Yifeng Zhao]

Add the compatible strings for the Naneng combo PHY found on rockchip SoC.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 .../phy/phy-rockchip-naneng-combphy.yaml      | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
new file mode 100644
index 000000000000..69908614609c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Naneng Combo Phy Device Tree Bindings
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-naneng-combphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: reference clock
+      - description: apb clock
+      - description: pipe clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: apb
+      - const: pipe
+
+  '#phy-cells':
+    const: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: exclusive apb reset line
+      - description: exclusive PHY reset line
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: combphy-apb
+      - const: combphy
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are access through GRF regs.
+
+  rockchip,pipe-phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional pipe settings are access through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+  - resets
+  - reset-names
+  - rockchip,pipe-grf
+  - rockchip,pipe-phy-grf
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/rk3568-cru.h>
+
+    pipegrf: syscon@fdc50000 {
+      compatible = "rockchip,rk3568-pipegrf", "syscon";
+      reg = <0xfdc50000 0x1000>;
+    };
+
+    pipe_phy_grf0: syscon@fdc70000 {
+      compatible = "rockchip,pipe-phy-grf", "syscon";
+      reg = <0xfdc70000 0x1000>;
+    };
+
+    combphy0_us: phy@fe820000 {
+      compatible = "rockchip,rk3568-naneng-combphy";
+      reg = <0xfe820000 0x100>;
+      #phy-cells = <1>;
+      clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
+        <&cru PCLK_PIPE>;
+      clock-names = "ref", "apb", "pipe";
+      assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+      assigned-clock-rates = <100000000>;
+      resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+      reset-names = "combphy-apb", "combphy";
+      rockchip,pipe-grf = <&pipegrf>;
+      rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+    };
-- 
2.17.1




_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v1 1/3] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Rob Herring]

On Thu, 26 Aug 2021 20:38:42 +0800, Yifeng Zhao wrote:
> Add the compatible strings for the Naneng combo PHY found on rockchip SoC.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> 
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc50000: failed to match any schema with compatible: ['rockchip,rk3568-pipegrf', 'syscon']
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc70000: failed to match any schema with compatible: ['rockchip,pipe-phy-grf', 'syscon']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1521096

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v1 1/3] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Rob Herring]

On Thu, 26 Aug 2021 20:38:42 +0800, Yifeng Zhao wrote:
> Add the compatible strings for the Naneng combo PHY found on rockchip SoC.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> 
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc50000: failed to match any schema with compatible: ['rockchip,rk3568-pipegrf', 'syscon']
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc70000: failed to match any schema with compatible: ['rockchip,pipe-phy-grf', 'syscon']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1521096

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH v1 1/3] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Rob Herring]

On Thu, 26 Aug 2021 20:38:42 +0800, Yifeng Zhao wrote:
> Add the compatible strings for the Naneng combo PHY found on rockchip SoC.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> 
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc50000: failed to match any schema with compatible: ['rockchip,rk3568-pipegrf', 'syscon']
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc70000: failed to match any schema with compatible: ['rockchip,pipe-phy-grf', 'syscon']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1521096

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 1/3] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Rob Herring]

On Thu, 26 Aug 2021 20:38:42 +0800, Yifeng Zhao wrote:
> Add the compatible strings for the Naneng combo PHY found on rockchip SoC.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> 
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc50000: failed to match any schema with compatible: ['rockchip,rk3568-pipegrf', 'syscon']
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc70000: failed to match any schema with compatible: ['rockchip,pipe-phy-grf', 'syscon']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1521096

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v1 2/3] phy/rockchip: add naneng combo phy for RK3568

[Yifeng Zhao]

This patch implements a combo phy driver for Rockchip SoCs
with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy,
sata-phy or sgmii-phy.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 drivers/phy/rockchip/Kconfig                  |   8 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
 3 files changed, 655 insertions(+)
 create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index e812adad7242..9022e395c056 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -66,6 +66,14 @@ config PHY_ROCKCHIP_INNO_DSIDPHY
 	  Enable this to support the Rockchip MIPI/LVDS/TTL PHY with
 	  Innosilicon IP block.
 
+config PHY_ROCKCHIP_NANENG_COMBO_PHY
+	tristate "Rockchip NANENG COMBO PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII
+	  combo PHY with NaNeng IP block.
+
 config PHY_ROCKCHIP_PCIE
 	tristate "Rockchip PCIe PHY Driver"
 	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index f0eec212b2aa..a5041efb5b8f 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY)	+= phy-rockchip-inno-csidphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY)	+= phy-rockchip-inno-dsidphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
+obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
 obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
new file mode 100644
index 000000000000..2c23d291de62
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -0,0 +1,646 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PIPE USB3.0 PCIE SATA combphy driver
+ *
+ * Copyright (C) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <dt-bindings/phy/phy.h>
+
+#define BIT_WRITEABLE_SHIFT		16
+
+struct rockchip_combphy_priv;
+
+struct combphy_reg {
+	u16 offset;
+	u16 bitend;
+	u16 bitstart;
+	u16 disable;
+	u16 enable;
+};
+
+struct rockchip_combphy_grfcfg {
+	struct combphy_reg pcie_mode_set;
+	struct combphy_reg usb_mode_set;
+	struct combphy_reg sgmii_mode_set;
+	struct combphy_reg qsgmii_mode_set;
+	struct combphy_reg pipe_rxterm_set;
+	struct combphy_reg pipe_txelec_set;
+	struct combphy_reg pipe_txcomp_set;
+	struct combphy_reg pipe_clk_25m;
+	struct combphy_reg pipe_clk_100m;
+	struct combphy_reg pipe_phymode_sel;
+	struct combphy_reg pipe_rate_sel;
+	struct combphy_reg pipe_rxterm_sel;
+	struct combphy_reg pipe_txelec_sel;
+	struct combphy_reg pipe_txcomp_sel;
+	struct combphy_reg pipe_clk_ext;
+	struct combphy_reg pipe_sel_usb;
+	struct combphy_reg pipe_sel_qsgmii;
+	struct combphy_reg pipe_phy_status;
+	struct combphy_reg con0_for_pcie;
+	struct combphy_reg con1_for_pcie;
+	struct combphy_reg con2_for_pcie;
+	struct combphy_reg con3_for_pcie;
+	struct combphy_reg con0_for_sata;
+	struct combphy_reg con1_for_sata;
+	struct combphy_reg con2_for_sata;
+	struct combphy_reg con3_for_sata;
+	struct combphy_reg pipe_con0_for_sata;
+	struct combphy_reg pipe_sgmii_mac_sel;
+	struct combphy_reg pipe_xpcs_phy_ready;
+	struct combphy_reg u3otg0_port_en;
+	struct combphy_reg u3otg1_port_en;
+};
+
+struct rockchip_combphy_cfg {
+	const int num_clks;
+	const struct clk_bulk_data *clks;
+	const struct rockchip_combphy_grfcfg *grfcfg;
+	int (*combphy_cfg)(struct rockchip_combphy_priv *priv);
+};
+
+struct rockchip_combphy_priv {
+	u8 mode;
+	void __iomem *mmio;
+	int num_clks;
+	struct clk_bulk_data *clks;
+	struct device *dev;
+	struct regmap *pipe_grf;
+	struct regmap *phy_grf;
+	struct phy *phy;
+	struct reset_control *apb_rst;
+	struct reset_control *phy_rst;
+	const struct rockchip_combphy_cfg *cfg;
+};
+
+static inline bool param_read(struct regmap *base,
+			      const struct combphy_reg *reg, u32 val)
+{
+	int ret;
+	u32 mask, orig, tmp;
+
+	ret = regmap_read(base, reg->offset, &orig);
+	if (ret)
+		return false;
+
+	mask = GENMASK(reg->bitend, reg->bitstart);
+	tmp = (orig & mask) >> reg->bitstart;
+
+	return tmp == val;
+}
+
+static int param_write(struct regmap *base,
+		       const struct combphy_reg *reg, bool en)
+{
+	u32 val, mask, tmp;
+
+	tmp = en ? reg->enable : reg->disable;
+	mask = GENMASK(reg->bitend, reg->bitstart);
+	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+	return regmap_write(base, reg->offset, val);
+}
+
+static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	u32 mask, val;
+
+	mask = GENMASK(cfg->pipe_phy_status.bitend,
+		       cfg->pipe_phy_status.bitstart);
+
+	regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val);
+	val = (val & mask) >> cfg->pipe_phy_status.bitstart;
+
+	return val;
+}
+
+static int rockchip_combphy_pcie_init(struct rockchip_combphy_priv *priv)
+{
+	int ret = 0;
+
+	if (priv->cfg->combphy_cfg) {
+		ret = priv->cfg->combphy_cfg(priv);
+		if (ret) {
+			dev_err(priv->dev, "failed to init phy for pcie\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int rockchip_combphy_usb3_init(struct rockchip_combphy_priv *priv)
+{
+	int ret = 0;
+
+	if (priv->cfg->combphy_cfg) {
+		ret = priv->cfg->combphy_cfg(priv);
+		if (ret) {
+			dev_err(priv->dev, "failed to init phy for usb3\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int rockchip_combphy_sata_init(struct rockchip_combphy_priv *priv)
+{
+	int ret = 0;
+
+	if (priv->cfg->combphy_cfg) {
+		ret = priv->cfg->combphy_cfg(priv);
+		if (ret) {
+			dev_err(priv->dev, "failed to init phy for sata\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int rockchip_combphy_sgmii_init(struct rockchip_combphy_priv *priv)
+{
+	int ret = 0;
+
+	if (priv->cfg->combphy_cfg) {
+		ret = priv->cfg->combphy_cfg(priv);
+		if (ret) {
+			dev_err(priv->dev, "failed to init phy for sgmii\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv)
+{
+	switch (priv->mode) {
+	case PHY_TYPE_PCIE:
+		rockchip_combphy_pcie_init(priv);
+		break;
+	case PHY_TYPE_USB3:
+		rockchip_combphy_usb3_init(priv);
+		break;
+	case PHY_TYPE_SATA:
+		rockchip_combphy_sata_init(priv);
+		break;
+	case PHY_TYPE_SGMII:
+	case PHY_TYPE_QSGMII:
+		return rockchip_combphy_sgmii_init(priv);
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_combphy_init(struct phy *phy)
+{
+	struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	u32 val;
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		dev_err(priv->dev, "failed to enable clks\n");
+		return ret;
+	}
+
+	ret = rockchip_combphy_set_mode(priv);
+	if (ret)
+		goto err_clk;
+
+	ret = reset_control_deassert(priv->phy_rst);
+	if (ret)
+		goto err_clk;
+
+	if (priv->mode == PHY_TYPE_USB3) {
+		ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready,
+						priv, val,
+						val == cfg->pipe_phy_status.enable,
+						10, 1000);
+		if (ret)
+			dev_warn(priv->dev, "wait phy status ready timeout\n");
+	}
+
+	return 0;
+
+err_clk:
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+
+	return ret;
+}
+
+static int rockchip_combphy_exit(struct phy *phy)
+{
+	struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->phy_rst);
+
+	return 0;
+}
+
+static const struct phy_ops rochchip_combphy_ops = {
+	.init = rockchip_combphy_init,
+	.exit = rockchip_combphy_exit,
+	.owner = THIS_MODULE,
+};
+
+static struct phy *rockchip_combphy_xlate(struct device *dev,
+					  struct of_phandle_args *args)
+{
+	struct rockchip_combphy_priv *priv = dev_get_drvdata(dev);
+
+	if (args->args_count != 1) {
+		dev_err(dev, "invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (priv->mode != PHY_NONE && priv->mode != args->args[0])
+		dev_warn(dev, "phy type select %d overwriting type %d\n",
+			 args->args[0], priv->mode);
+
+	priv->mode = args->args[0];
+
+	return priv->phy;
+}
+
+static int rockchip_combphy_parse_dt(struct device *dev,
+				     struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_cfg *phy_cfg = priv->cfg;
+	int ret, mac_id;
+
+	ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
+	if (ret == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (ret)
+		priv->num_clks = 0;
+
+	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							 "rockchip,pipe-grf");
+	if (IS_ERR(priv->pipe_grf)) {
+		dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n");
+		return PTR_ERR(priv->pipe_grf);
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							"rockchip,pipe-phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	if (device_property_present(dev, "rockchip,dis-u3otg0-port"))
+		param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg0_port_en,
+			    false);
+	else if (device_property_present(dev, "rockchip,dis-u3otg1-port"))
+		param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg1_port_en,
+			    false);
+
+	if (!device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &mac_id) &&
+	    (mac_id > 0))
+		param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel,
+			    true);
+
+	priv->apb_rst = devm_reset_control_get_optional(dev, "combphy-apb");
+	if (IS_ERR(priv->apb_rst)) {
+		ret = PTR_ERR(priv->apb_rst);
+
+		if (ret != -EPROBE_DEFER)
+			dev_warn(dev, "failed to get apb reset\n");
+
+		return ret;
+	}
+
+	priv->phy_rst = devm_reset_control_get_optional(dev, "combphy");
+	if (IS_ERR(priv->phy_rst)) {
+		ret = PTR_ERR(priv->phy_rst);
+
+		if (ret != -EPROBE_DEFER)
+			dev_warn(dev, "failed to get phy reset\n");
+
+		return ret;
+	}
+
+	return reset_control_assert(priv->phy_rst);
+}
+
+static int rockchip_combphy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_combphy_priv *priv;
+	const struct rockchip_combphy_cfg *phy_cfg;
+	struct resource *res;
+	int ret;
+
+	phy_cfg = of_device_get_match_data(dev);
+	if (!phy_cfg) {
+		dev_err(dev, "No OF match data provided\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->num_clks = phy_cfg->num_clks;
+
+	priv->clks = devm_kmemdup(dev, phy_cfg->clks,
+				  phy_cfg->num_clks * sizeof(struct clk_bulk_data),
+				  GFP_KERNEL);
+
+	if (!priv->clks)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->mode = PHY_NONE;
+	priv->cfg = phy_cfg;
+
+	ret = rockchip_combphy_parse_dt(dev, priv);
+	if (ret)
+		return ret;
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	struct clk *refclk = NULL;
+	unsigned long rate;
+	int i;
+	u32 val;
+
+	/* Configure PHY reference clock frequency */
+	for (i = 0; i < priv->num_clks; i++) {
+		if (!strncmp(priv->clks[i].id, "refclk", 6)) {
+			refclk = priv->clks[i].clk;
+			break;
+		}
+	}
+
+	if (!refclk) {
+		dev_err(priv->dev, "No refclk found\n");
+		return -EINVAL;
+	}
+
+	switch (priv->mode) {
+	case PHY_TYPE_PCIE:
+		/* Set SSC downward spread spectrum */
+		val = readl(priv->mmio + (0x1f << 2));
+		val &= ~GENMASK(5, 4);
+		val |= 0x01 << 4;
+		writel(val, priv->mmio + 0x7c);
+
+		param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
+		param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
+		param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
+		param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
+		break;
+	case PHY_TYPE_USB3:
+		/* Set SSC downward spread spectrum */
+		val = readl(priv->mmio + (0x1f << 2));
+		val &= ~GENMASK(5, 4);
+		val |= 0x01 << 4;
+		writel(val, priv->mmio + 0x7c);
+
+		/* Enable adaptive CTLE for USB3.0 Rx */
+		val = readl(priv->mmio + (0x0e << 2));
+		val &= ~GENMASK(0, 0);
+		val |= 0x01;
+		writel(val, priv->mmio + (0x0e << 2));
+
+		/* Set PLL KVCO fine tuning signals */
+		val = readl(priv->mmio + (0x20 << 2));
+		val &= ~(0x7 << 2);
+		val |= 0x2 << 2;
+		writel(val, priv->mmio + (0x20 << 2));
+
+		/* Set PLL LPF R1 to su_trim[10:7]=1001 */
+		writel(0x4, priv->mmio + (0xb << 2));
+
+		/* Set PLL input clock divider 1/2 */
+		val = readl(priv->mmio + (0x5 << 2));
+		val &= ~(0x3 << 6);
+		val |= 0x1 << 6;
+		writel(val, priv->mmio + (0x5 << 2));
+
+		/* Set PLL loop divider */
+		writel(0x32, priv->mmio + (0x11 << 2));
+
+		/* Set PLL KVCO to min and set PLL charge pump current to max */
+		writel(0xf0, priv->mmio + (0xa << 2));
+
+		param_write(priv->phy_grf, &cfg->pipe_sel_usb, true);
+		param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
+		param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
+		param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+		break;
+	case PHY_TYPE_SATA:
+		writel(0x41, priv->mmio + 0x38);
+		writel(0x8F, priv->mmio + 0x18);
+		param_write(priv->phy_grf, &cfg->con0_for_sata, true);
+		param_write(priv->phy_grf, &cfg->con1_for_sata, true);
+		param_write(priv->phy_grf, &cfg->con2_for_sata, true);
+		param_write(priv->phy_grf, &cfg->con3_for_sata, true);
+		param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
+		break;
+	case PHY_TYPE_SGMII:
+		param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
+		param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
+		param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
+		param_write(priv->phy_grf, &cfg->sgmii_mode_set, true);
+		break;
+	case PHY_TYPE_QSGMII:
+		param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
+		param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
+		param_write(priv->phy_grf, &cfg->pipe_rate_sel, true);
+		param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
+		param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true);
+		break;
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		return -EINVAL;
+	}
+
+	rate = clk_get_rate(refclk);
+
+	switch (rate) {
+	case 24000000:
+		if (priv->mode == PHY_TYPE_USB3 || priv->mode == PHY_TYPE_SATA) {
+			/* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */
+			val = readl(priv->mmio + (0x0e << 2));
+			val &= ~GENMASK(7, 6);
+			val |= 0x01 << 6;
+			writel(val, priv->mmio + (0x0e << 2));
+
+			val = readl(priv->mmio + (0x0f << 2));
+			val &= ~GENMASK(7, 0);
+			val |= 0x5f;
+			writel(val, priv->mmio + (0x0f << 2));
+		}
+		break;
+	case 25000000:
+		param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
+		break;
+	case 100000000:
+		param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
+		if (priv->mode == PHY_TYPE_PCIE) {
+			/* PLL KVCO tuning fine */
+			val = readl(priv->mmio + (0x20 << 2));
+			val &= ~(0x7 << 2);
+			val |= 0x2 << 2;
+			writel(val, priv->mmio + (0x20 << 2));
+
+			/* Enable controlling random jitter, aka RMJ */
+			writel(0x4, priv->mmio + (0xb << 2));
+
+			val = readl(priv->mmio + (0x5 << 2));
+			val &= ~(0x3 << 6);
+			val |= 0x1 << 6;
+			writel(val, priv->mmio + (0x5 << 2));
+
+			writel(0x32, priv->mmio + (0x11 << 2));
+			writel(0xf0, priv->mmio + (0xa << 2));
+		} else if (priv->mode == PHY_TYPE_SATA) {
+			/* downward spread spectrum +500ppm */
+			val = readl(priv->mmio + (0x1f << 2));
+			val &= ~GENMASK(7, 4);
+			val |= 0x50;
+			writel(val, priv->mmio + (0x1f << 2));
+		}
+		break;
+	default:
+		dev_err(priv->dev, "Unsupported rate: %lu\n", rate);
+		return -EINVAL;
+	}
+
+	if (device_property_read_bool(priv->dev, "rockchip,ext-refclk")) {
+		param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
+		if (priv->mode == PHY_TYPE_PCIE && rate == 100000000) {
+			val = readl(priv->mmio + (0xc << 2));
+			val |= 0x3 << 4 | 0x1 << 7;
+			writel(val, priv->mmio + (0xc << 2));
+
+			val = readl(priv->mmio + (0xd << 2));
+			val |= 0x1;
+			writel(val, priv->mmio + (0xd << 2));
+		}
+	}
+
+	if (device_property_read_bool(priv->dev, "rockchip,enable-ssc")) {
+		val = readl(priv->mmio + (0x7 << 2));
+		val |= BIT(4);
+		writel(val, priv->mmio + (0x7 << 2));
+	}
+
+	return 0;
+}
+
+static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
+	/* pipe-phy-grf */
+	.pcie_mode_set		= { 0x0000, 5, 0, 0x00, 0x11 },
+	.usb_mode_set		= { 0x0000, 5, 0, 0x00, 0x04 },
+	.sgmii_mode_set		= { 0x0000, 5, 0, 0x00, 0x01 },
+	.qsgmii_mode_set	= { 0x0000, 5, 0, 0x00, 0x21 },
+	.pipe_rxterm_set	= { 0x0000, 12, 12, 0x00, 0x01 },
+	.pipe_txelec_set	= { 0x0004, 1, 1, 0x00, 0x01 },
+	.pipe_txcomp_set	= { 0x0004, 4, 4, 0x00, 0x01 },
+	.pipe_clk_25m		= { 0x0004, 14, 13, 0x00, 0x01 },
+	.pipe_clk_100m		= { 0x0004, 14, 13, 0x00, 0x02 },
+	.pipe_phymode_sel	= { 0x0008, 1, 1, 0x00, 0x01 },
+	.pipe_rate_sel		= { 0x0008, 2, 2, 0x00, 0x01 },
+	.pipe_rxterm_sel	= { 0x0008, 8, 8, 0x00, 0x01 },
+	.pipe_txelec_sel	= { 0x0008, 12, 12, 0x00, 0x01 },
+	.pipe_txcomp_sel	= { 0x0008, 15, 15, 0x00, 0x01 },
+	.pipe_clk_ext		= { 0x000c, 9, 8, 0x02, 0x01 },
+	.pipe_sel_usb		= { 0x000c, 14, 13, 0x00, 0x01 },
+	.pipe_sel_qsgmii	= { 0x000c, 15, 13, 0x00, 0x07 },
+	.pipe_phy_status	= { 0x0034, 6, 6, 0x01, 0x00 },
+	.con0_for_pcie		= { 0x0000, 15, 0, 0x00, 0x1000 },
+	.con1_for_pcie		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_pcie		= { 0x0008, 15, 0, 0x00, 0x0101 },
+	.con3_for_pcie		= { 0x000c, 15, 0, 0x00, 0x0200 },
+	.con0_for_sata		= { 0x0000, 15, 0, 0x00, 0x0119 },
+	.con1_for_sata		= { 0x0004, 15, 0, 0x00, 0x0040 },
+	.con2_for_sata		= { 0x0008, 15, 0, 0x00, 0x80c3 },
+	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x4407 },
+	/* pipe-grf */
+	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
+	.pipe_sgmii_mac_sel	= { 0x0040, 1, 1, 0x00, 0x01 },
+	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
+	.u3otg0_port_en		= { 0x0104, 15, 0, 0x0181, 0x1100 },
+	.u3otg1_port_en		= { 0x0144, 15, 0, 0x0181, 0x1100 },
+};
+
+static const struct clk_bulk_data rk3568_clks[] = {
+	{ .id = "ref" },
+	{ .id = "apb" },
+	{ .id = "pipe" },
+};
+
+static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
+	.num_clks	= ARRAY_SIZE(rk3568_clks),
+	.clks		= rk3568_clks,
+	.grfcfg		= &rk3568_combphy_grfcfgs,
+	.combphy_cfg	= rk3568_combphy_cfg,
+};
+
+static const struct of_device_id rockchip_combphy_of_match[] = {
+	{
+		.compatible = "rockchip,rk3568-naneng-combphy",
+		.data = &rk3568_combphy_cfgs,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match);
+
+static struct platform_driver rockchip_combphy_driver = {
+	.probe	= rockchip_combphy_probe,
+	.driver = {
+		.name = "naneng-combphy",
+		.of_match_table = rockchip_combphy_of_match,
+	},
+};
+module_platform_driver(rockchip_combphy_driver);
+
+MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

Re: [PATCH v1 2/3] phy/rockchip: add naneng combo phy for RK3568

[Nicolas Frattaroli]

On Donnerstag, 26. August 2021 14:38:43 CEST Yifeng Zhao wrote:
> This patch implements a combo phy driver for Rockchip SoCs
> with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy,
> sata-phy or sgmii-phy.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> [...]
> +static int rockchip_combphy_pcie_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
pcie\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_usb3_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
usb3\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sata_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sata\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sgmii_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sgmii\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv)
> +{
> +	switch (priv->mode) {
> +	case PHY_TYPE_PCIE:
> +		rockchip_combphy_pcie_init(priv);
> +		break;
> +	case PHY_TYPE_USB3:
> +		rockchip_combphy_usb3_init(priv);
> +		break;
> +	case PHY_TYPE_SATA:
> +		rockchip_combphy_sata_init(priv);
> +		break;
> +	case PHY_TYPE_SGMII:
> +	case PHY_TYPE_QSGMII:
> +		return rockchip_combphy_sgmii_init(priv);
> +	default:
> +		dev_err(priv->dev, "incompatible PHY type\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}

All of the _init functions appear to be the same except for the error
string.

I think it would be better to just have the init done in _set_mode,
and then use the switch case statement to show the right error
message on if (ret).

> [...]
> +
> +static int rockchip_combphy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_combphy_priv *priv;
> +	const struct rockchip_combphy_cfg *phy_cfg;
> +	struct resource *res;
> +	int ret;
> +
> +	phy_cfg = of_device_get_match_data(dev);
> +	if (!phy_cfg) {
> +		dev_err(dev, "No OF match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);

I think devm_platform_get_and_ioremap_resource is preferred here,
using it also means you can get rid of res.

> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> [...]

Regards,
Nicolas Frattaroli



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v1 2/3] phy/rockchip: add naneng combo phy for RK3568

[Nicolas Frattaroli]

On Donnerstag, 26. August 2021 14:38:43 CEST Yifeng Zhao wrote:
> This patch implements a combo phy driver for Rockchip SoCs
> with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy,
> sata-phy or sgmii-phy.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> [...]
> +static int rockchip_combphy_pcie_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
pcie\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_usb3_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
usb3\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sata_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sata\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sgmii_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sgmii\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv)
> +{
> +	switch (priv->mode) {
> +	case PHY_TYPE_PCIE:
> +		rockchip_combphy_pcie_init(priv);
> +		break;
> +	case PHY_TYPE_USB3:
> +		rockchip_combphy_usb3_init(priv);
> +		break;
> +	case PHY_TYPE_SATA:
> +		rockchip_combphy_sata_init(priv);
> +		break;
> +	case PHY_TYPE_SGMII:
> +	case PHY_TYPE_QSGMII:
> +		return rockchip_combphy_sgmii_init(priv);
> +	default:
> +		dev_err(priv->dev, "incompatible PHY type\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}

All of the _init functions appear to be the same except for the error
string.

I think it would be better to just have the init done in _set_mode,
and then use the switch case statement to show the right error
message on if (ret).

> [...]
> +
> +static int rockchip_combphy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_combphy_priv *priv;
> +	const struct rockchip_combphy_cfg *phy_cfg;
> +	struct resource *res;
> +	int ret;
> +
> +	phy_cfg = of_device_get_match_data(dev);
> +	if (!phy_cfg) {
> +		dev_err(dev, "No OF match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);

I think devm_platform_get_and_ioremap_resource is preferred here,
using it also means you can get rid of res.

> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> [...]

Regards,
Nicolas Frattaroli

Re: [PATCH v1 2/3] phy/rockchip: add naneng combo phy for RK3568

[Nicolas Frattaroli]

On Donnerstag, 26. August 2021 14:38:43 CEST Yifeng Zhao wrote:
> This patch implements a combo phy driver for Rockchip SoCs
> with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy,
> sata-phy or sgmii-phy.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> [...]
> +static int rockchip_combphy_pcie_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
pcie\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_usb3_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
usb3\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sata_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sata\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sgmii_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sgmii\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv)
> +{
> +	switch (priv->mode) {
> +	case PHY_TYPE_PCIE:
> +		rockchip_combphy_pcie_init(priv);
> +		break;
> +	case PHY_TYPE_USB3:
> +		rockchip_combphy_usb3_init(priv);
> +		break;
> +	case PHY_TYPE_SATA:
> +		rockchip_combphy_sata_init(priv);
> +		break;
> +	case PHY_TYPE_SGMII:
> +	case PHY_TYPE_QSGMII:
> +		return rockchip_combphy_sgmii_init(priv);
> +	default:
> +		dev_err(priv->dev, "incompatible PHY type\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}

All of the _init functions appear to be the same except for the error
string.

I think it would be better to just have the init done in _set_mode,
and then use the switch case statement to show the right error
message on if (ret).

> [...]
> +
> +static int rockchip_combphy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_combphy_priv *priv;
> +	const struct rockchip_combphy_cfg *phy_cfg;
> +	struct resource *res;
> +	int ret;
> +
> +	phy_cfg = of_device_get_match_data(dev);
> +	if (!phy_cfg) {
> +		dev_err(dev, "No OF match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);

I think devm_platform_get_and_ioremap_resource is preferred here,
using it also means you can get rid of res.

> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> [...]

Regards,
Nicolas Frattaroli



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] phy/rockchip: add naneng combo phy for RK3568

[Nicolas Frattaroli]

On Donnerstag, 26. August 2021 14:38:43 CEST Yifeng Zhao wrote:
> This patch implements a combo phy driver for Rockchip SoCs
> with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy,
> sata-phy or sgmii-phy.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> [...]
> +static int rockchip_combphy_pcie_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
pcie\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_usb3_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
usb3\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sata_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sata\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_sgmii_init(struct rockchip_combphy_priv *priv)
> +{
> +	int ret = 0;
> +
> +	if (priv->cfg->combphy_cfg) {
> +		ret = priv->cfg->combphy_cfg(priv);
> +		if (ret) {
> +			dev_err(priv->dev, "failed to init phy for 
sgmii\n");
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv)
> +{
> +	switch (priv->mode) {
> +	case PHY_TYPE_PCIE:
> +		rockchip_combphy_pcie_init(priv);
> +		break;
> +	case PHY_TYPE_USB3:
> +		rockchip_combphy_usb3_init(priv);
> +		break;
> +	case PHY_TYPE_SATA:
> +		rockchip_combphy_sata_init(priv);
> +		break;
> +	case PHY_TYPE_SGMII:
> +	case PHY_TYPE_QSGMII:
> +		return rockchip_combphy_sgmii_init(priv);
> +	default:
> +		dev_err(priv->dev, "incompatible PHY type\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}

All of the _init functions appear to be the same except for the error
string.

I think it would be better to just have the init done in _set_mode,
and then use the switch case statement to show the right error
message on if (ret).

> [...]
> +
> +static int rockchip_combphy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_combphy_priv *priv;
> +	const struct rockchip_combphy_cfg *phy_cfg;
> +	struct resource *res;
> +	int ret;
> +
> +	phy_cfg = of_device_get_match_data(dev);
> +	if (!phy_cfg) {
> +		dev_err(dev, "No OF match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);

I think devm_platform_get_and_ioremap_resource is preferred here,
using it also means you can get rid of res.

> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> [...]

Regards,
Nicolas Frattaroli



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v1 3/3] arm64: dts: rockchip: add naneng combo phy nodes for rk3568

[Yifeng Zhao]

Add the core dt-node for the rk3568's naneng combo phys.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index d89831bee1eb..b421e3d52412 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -214,11 +214,31 @@
 		};
 	};
 
+	pipegrf: syscon@fdc50000 {
+		compatible = "rockchip,rk3568-pipegrf", "syscon";
+		reg = <0x0 0xfdc50000 0x0 0x1000>;
+	};
+
 	grf: syscon@fdc60000 {
 		compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfdc60000 0x0 0x10000>;
 	};
 
+	pipe_phy_grf0: syscon@fdc70000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc70000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf1: syscon@fdc80000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc80000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf2: syscon@fdc90000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc90000 0x0 0x1000>;
+	};
+
 	pmucru: clock-controller@fdd00000 {
 		compatible = "rockchip,rk3568-pmucru";
 		reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -862,6 +882,54 @@
 		status = "disabled";
 	};
 
+	combphy0_us: phy@fe820000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe820000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+		status = "disabled";
+	};
+
+	combphy1_usq: phy@fe830000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe830000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY1_REF>, <&cru PCLK_PIPEPHY1>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+		status = "disabled";
+	};
+
+	combphy2_psq: phy@fe840000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe840000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY2_REF>, <&cru PCLK_PIPEPHY2>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+		status = "disabled";
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3568-pinctrl";
 		rockchip,grf = <&grf>;
-- 
2.17.1




-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v1 3/3] arm64: dts: rockchip: add naneng combo phy nodes for rk3568

[Yifeng Zhao]

Add the core dt-node for the rk3568's naneng combo phys.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index d89831bee1eb..b421e3d52412 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -214,11 +214,31 @@
 		};
 	};
 
+	pipegrf: syscon@fdc50000 {
+		compatible = "rockchip,rk3568-pipegrf", "syscon";
+		reg = <0x0 0xfdc50000 0x0 0x1000>;
+	};
+
 	grf: syscon@fdc60000 {
 		compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfdc60000 0x0 0x10000>;
 	};
 
+	pipe_phy_grf0: syscon@fdc70000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc70000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf1: syscon@fdc80000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc80000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf2: syscon@fdc90000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc90000 0x0 0x1000>;
+	};
+
 	pmucru: clock-controller@fdd00000 {
 		compatible = "rockchip,rk3568-pmucru";
 		reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -862,6 +882,54 @@
 		status = "disabled";
 	};
 
+	combphy0_us: phy@fe820000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe820000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+		status = "disabled";
+	};
+
+	combphy1_usq: phy@fe830000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe830000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY1_REF>, <&cru PCLK_PIPEPHY1>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+		status = "disabled";
+	};
+
+	combphy2_psq: phy@fe840000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe840000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY2_REF>, <&cru PCLK_PIPEPHY2>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+		status = "disabled";
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3568-pinctrl";
 		rockchip,grf = <&grf>;
-- 
2.17.1

[PATCH v1 3/3] arm64: dts: rockchip: add naneng combo phy nodes for rk3568

[Yifeng Zhao]

Add the core dt-node for the rk3568's naneng combo phys.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index d89831bee1eb..b421e3d52412 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -214,11 +214,31 @@
 		};
 	};
 
+	pipegrf: syscon@fdc50000 {
+		compatible = "rockchip,rk3568-pipegrf", "syscon";
+		reg = <0x0 0xfdc50000 0x0 0x1000>;
+	};
+
 	grf: syscon@fdc60000 {
 		compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfdc60000 0x0 0x10000>;
 	};
 
+	pipe_phy_grf0: syscon@fdc70000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc70000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf1: syscon@fdc80000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc80000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf2: syscon@fdc90000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc90000 0x0 0x1000>;
+	};
+
 	pmucru: clock-controller@fdd00000 {
 		compatible = "rockchip,rk3568-pmucru";
 		reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -862,6 +882,54 @@
 		status = "disabled";
 	};
 
+	combphy0_us: phy@fe820000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe820000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+		status = "disabled";
+	};
+
+	combphy1_usq: phy@fe830000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe830000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY1_REF>, <&cru PCLK_PIPEPHY1>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+		status = "disabled";
+	};
+
+	combphy2_psq: phy@fe840000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe840000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY2_REF>, <&cru PCLK_PIPEPHY2>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+		status = "disabled";
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3568-pinctrl";
 		rockchip,grf = <&grf>;
-- 
2.17.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 3/3] arm64: dts: rockchip: add naneng combo phy nodes for rk3568

[Yifeng Zhao]

Add the core dt-node for the rk3568's naneng combo phys.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
---

 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index d89831bee1eb..b421e3d52412 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -214,11 +214,31 @@
 		};
 	};
 
+	pipegrf: syscon@fdc50000 {
+		compatible = "rockchip,rk3568-pipegrf", "syscon";
+		reg = <0x0 0xfdc50000 0x0 0x1000>;
+	};
+
 	grf: syscon@fdc60000 {
 		compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfdc60000 0x0 0x10000>;
 	};
 
+	pipe_phy_grf0: syscon@fdc70000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc70000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf1: syscon@fdc80000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc80000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf2: syscon@fdc90000 {
+		compatible = "rockchip,pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc90000 0x0 0x1000>;
+	};
+
 	pmucru: clock-controller@fdd00000 {
 		compatible = "rockchip,rk3568-pmucru";
 		reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -862,6 +882,54 @@
 		status = "disabled";
 	};
 
+	combphy0_us: phy@fe820000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe820000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+		status = "disabled";
+	};
+
+	combphy1_usq: phy@fe830000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe830000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY1_REF>, <&cru PCLK_PIPEPHY1>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+		status = "disabled";
+	};
+
+	combphy2_psq: phy@fe840000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe840000 0x0 0x100>;
+		#phy-cells = <1>;
+		clocks = <&pmucru CLK_PCIEPHY2_REF>, <&cru PCLK_PIPEPHY2>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
+		reset-names = "combphy-apb", "combphy";
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+		status = "disabled";
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3568-pinctrl";
 		rockchip,grf = <&grf>;
-- 
2.17.1




_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v1 3/3] arm64: dts: rockchip: add naneng combo phy nodes for rk3568

[Nicolas Frattaroli]

On Thursday, 26. August 2021 14:38:44 CEST Yifeng Zhao wrote:
> Add the core dt-node for the rk3568's naneng combo phys.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index d89831bee1eb..b421e3d52412
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -214,11 +214,31 @@
>  		};
>  	};
> 
> [...]
> 
> +	combphy0_us: phy@fe820000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe820000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
> +		status = "disabled";
> +	};

RK3566 doesn't have this PHY I believe so it shouldn't be in the
rk356x.dtsi file. It needs to be moved to rk3568.dtsi.

The other two combphy nodes are shared between the two SoCs so
they can stay here.

> +
> +	combphy1_usq: phy@fe830000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe830000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY1_REF>, <&cru PCLK_PIPEPHY1>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
> +		status = "disabled";
> +	};
> +
> +	combphy2_psq: phy@fe840000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe840000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY2_REF>, <&cru PCLK_PIPEPHY2>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
> +		status = "disabled";
> +	};
> +
>  	pinctrl: pinctrl {
>  		compatible = "rockchip,rk3568-pinctrl";
>  		rockchip,grf = <&grf>;


Regards,
Nicolas Frattaroli



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v1 3/3] arm64: dts: rockchip: add naneng combo phy nodes for rk3568

[Nicolas Frattaroli]

On Thursday, 26. August 2021 14:38:44 CEST Yifeng Zhao wrote:
> Add the core dt-node for the rk3568's naneng combo phys.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index d89831bee1eb..b421e3d52412
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -214,11 +214,31 @@
>  		};
>  	};
> 
> [...]
> 
> +	combphy0_us: phy@fe820000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe820000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
> +		status = "disabled";
> +	};

RK3566 doesn't have this PHY I believe so it shouldn't be in the
rk356x.dtsi file. It needs to be moved to rk3568.dtsi.

The other two combphy nodes are shared between the two SoCs so
they can stay here.

> +
> +	combphy1_usq: phy@fe830000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe830000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY1_REF>, <&cru PCLK_PIPEPHY1>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
> +		status = "disabled";
> +	};
> +
> +	combphy2_psq: phy@fe840000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe840000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY2_REF>, <&cru PCLK_PIPEPHY2>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
> +		status = "disabled";
> +	};
> +
>  	pinctrl: pinctrl {
>  		compatible = "rockchip,rk3568-pinctrl";
>  		rockchip,grf = <&grf>;


Regards,
Nicolas Frattaroli

Re: [PATCH v1 3/3] arm64: dts: rockchip: add naneng combo phy nodes for rk3568

[Nicolas Frattaroli]

On Thursday, 26. August 2021 14:38:44 CEST Yifeng Zhao wrote:
> Add the core dt-node for the rk3568's naneng combo phys.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index d89831bee1eb..b421e3d52412
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -214,11 +214,31 @@
>  		};
>  	};
> 
> [...]
> 
> +	combphy0_us: phy@fe820000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe820000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
> +		status = "disabled";
> +	};

RK3566 doesn't have this PHY I believe so it shouldn't be in the
rk356x.dtsi file. It needs to be moved to rk3568.dtsi.

The other two combphy nodes are shared between the two SoCs so
they can stay here.

> +
> +	combphy1_usq: phy@fe830000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe830000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY1_REF>, <&cru PCLK_PIPEPHY1>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
> +		status = "disabled";
> +	};
> +
> +	combphy2_psq: phy@fe840000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe840000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY2_REF>, <&cru PCLK_PIPEPHY2>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
> +		status = "disabled";
> +	};
> +
>  	pinctrl: pinctrl {
>  		compatible = "rockchip,rk3568-pinctrl";
>  		rockchip,grf = <&grf>;


Regards,
Nicolas Frattaroli



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/3] arm64: dts: rockchip: add naneng combo phy nodes for rk3568

[Nicolas Frattaroli]

On Thursday, 26. August 2021 14:38:44 CEST Yifeng Zhao wrote:
> Add the core dt-node for the rk3568's naneng combo phys.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index d89831bee1eb..b421e3d52412
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -214,11 +214,31 @@
>  		};
>  	};
> 
> [...]
> 
> +	combphy0_us: phy@fe820000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe820000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY0_REF>, <&cru PCLK_PIPEPHY0>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
> +		status = "disabled";
> +	};

RK3566 doesn't have this PHY I believe so it shouldn't be in the
rk356x.dtsi file. It needs to be moved to rk3568.dtsi.

The other two combphy nodes are shared between the two SoCs so
they can stay here.

> +
> +	combphy1_usq: phy@fe830000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe830000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY1_REF>, <&cru PCLK_PIPEPHY1>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
> +		status = "disabled";
> +	};
> +
> +	combphy2_psq: phy@fe840000 {
> +		compatible = "rockchip,rk3568-naneng-combphy";
> +		reg = <0x0 0xfe840000 0x0 0x100>;
> +		#phy-cells = <1>;
> +		clocks = <&pmucru CLK_PCIEPHY2_REF>, <&cru PCLK_PIPEPHY2>,
> +			 <&cru PCLK_PIPE>;
> +		clock-names = "ref", "apb", "pipe";
> +		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
> +		assigned-clock-rates = <100000000>;
> +		resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
> +		reset-names = "combphy-apb", "combphy";
> +		rockchip,pipe-grf = <&pipegrf>;
> +		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
> +		status = "disabled";
> +	};
> +
>  	pinctrl: pinctrl {
>  		compatible = "rockchip,rk3568-pinctrl";
>  		rockchip,grf = <&grf>;


Regards,
Nicolas Frattaroli



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v1 0/3]

[Peter Geis]

On Thu, Aug 26, 2021 at 8:42 AM Yifeng Zhao <yifeng.zhao@rock-chips.com> wrote:
>
> Add Naneng combo PHY support for RK3568
>
> This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.

Good Afternoon,

Some feedback on this driver, for when you resend it to the mailing list.
I'm sending this against the cover letter since the mailing list
doesn't have the actual driver.

The driver doesn't work out of the box, you renamed the clocks but
missed one use point.
There's a lot of "magic numbers" that need to be defined.
Configuration could use some cleanup.
A parallel problem, if the PCIe phy fails to probe (because of the
aforementioned clock issue) the PCIe controller hard locks the board
during probe.

I look forward to version two.

Very Respectfully,
Peter Geis

>
>
>
> Yifeng Zhao (3):
>   dt-bindings: phy: rockchip: Add Naneng combo PHY bindings
>   phy/rockchip: add naneng combo phy for RK3568
>   arm64: dts: rockchip: add naneng combo phy nodes for rk3568
>
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 100 +++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  68 ++
>  drivers/phy/rockchip/Kconfig                  |   8 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
>  5 files changed, 823 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
>
> --
> 2.17.1
>
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v1 0/3]

[Peter Geis]

On Thu, Aug 26, 2021 at 8:42 AM Yifeng Zhao <yifeng.zhao@rock-chips.com> wrote:
>
> Add Naneng combo PHY support for RK3568
>
> This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.

Good Afternoon,

Some feedback on this driver, for when you resend it to the mailing list.
I'm sending this against the cover letter since the mailing list
doesn't have the actual driver.

The driver doesn't work out of the box, you renamed the clocks but
missed one use point.
There's a lot of "magic numbers" that need to be defined.
Configuration could use some cleanup.
A parallel problem, if the PCIe phy fails to probe (because of the
aforementioned clock issue) the PCIe controller hard locks the board
during probe.

I look forward to version two.

Very Respectfully,
Peter Geis

>
>
>
> Yifeng Zhao (3):
>   dt-bindings: phy: rockchip: Add Naneng combo PHY bindings
>   phy/rockchip: add naneng combo phy for RK3568
>   arm64: dts: rockchip: add naneng combo phy nodes for rk3568
>
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 100 +++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  68 ++
>  drivers/phy/rockchip/Kconfig                  |   8 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
>  5 files changed, 823 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
>
> --
> 2.17.1
>
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v1 0/3]

[Peter Geis]

On Thu, Aug 26, 2021 at 8:42 AM Yifeng Zhao <yifeng.zhao@rock-chips.com> wrote:
>
> Add Naneng combo PHY support for RK3568
>
> This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.

Good Afternoon,

Some feedback on this driver, for when you resend it to the mailing list.
I'm sending this against the cover letter since the mailing list
doesn't have the actual driver.

The driver doesn't work out of the box, you renamed the clocks but
missed one use point.
There's a lot of "magic numbers" that need to be defined.
Configuration could use some cleanup.
A parallel problem, if the PCIe phy fails to probe (because of the
aforementioned clock issue) the PCIe controller hard locks the board
during probe.

I look forward to version two.

Very Respectfully,
Peter Geis

>
>
>
> Yifeng Zhao (3):
>   dt-bindings: phy: rockchip: Add Naneng combo PHY bindings
>   phy/rockchip: add naneng combo phy for RK3568
>   arm64: dts: rockchip: add naneng combo phy nodes for rk3568
>
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 100 +++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  68 ++
>  drivers/phy/rockchip/Kconfig                  |   8 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
>  5 files changed, 823 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
>
> --
> 2.17.1
>
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 0/3]

[Peter Geis]

On Thu, Aug 26, 2021 at 8:42 AM Yifeng Zhao <yifeng.zhao@rock-chips.com> wrote:
>
> Add Naneng combo PHY support for RK3568
>
> This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.

Good Afternoon,

Some feedback on this driver, for when you resend it to the mailing list.
I'm sending this against the cover letter since the mailing list
doesn't have the actual driver.

The driver doesn't work out of the box, you renamed the clocks but
missed one use point.
There's a lot of "magic numbers" that need to be defined.
Configuration could use some cleanup.
A parallel problem, if the PCIe phy fails to probe (because of the
aforementioned clock issue) the PCIe controller hard locks the board
during probe.

I look forward to version two.

Very Respectfully,
Peter Geis

>
>
>
> Yifeng Zhao (3):
>   dt-bindings: phy: rockchip: Add Naneng combo PHY bindings
>   phy/rockchip: add naneng combo phy for RK3568
>   arm64: dts: rockchip: add naneng combo phy nodes for rk3568
>
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 100 +++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  68 ++
>  drivers/phy/rockchip/Kconfig                  |   8 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../rockchip/phy-rockchip-naneng-combphy.c    | 646 ++++++++++++++++++
>  5 files changed, 823 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
>
> --
> 2.17.1
>
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip