* [PATCH 3/4] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi
@ 2014-02-23 12:40 Wolfram Sang
2014-02-23 22:28 ` Laurent Pinchart
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Wolfram Sang @ 2014-02-23 12:40 UTC (permalink / raw)
To: linux-sh
From: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
---
arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index eb2cec8..d3aed50 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -26,6 +26,9 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
};
cpus {
@@ -179,6 +182,7 @@
<0 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -230,6 +234,7 @@
};
i2c5: i2c@e6528000 {
+ /* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
@@ -239,6 +244,37 @@
status = "disabled";
};
+ i2c6: i2c@e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2cB-r8a7791", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2cB-r8a7791", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2cB-r8a7791", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
+ status = "disabled";
+ };
+
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
--
1.8.5.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 3/4] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi
2014-02-23 12:40 [PATCH 3/4] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi Wolfram Sang
@ 2014-02-23 22:28 ` Laurent Pinchart
2014-02-24 10:34 ` Wolfram Sang
2015-07-21 0:27 ` [PATCH 3/4] ARM: shmobile: r8a7791: Add Audio CTU support on DTSI Kuninori Morimoto
2 siblings, 0 replies; 4+ messages in thread
From: Laurent Pinchart @ 2014-02-23 22:28 UTC (permalink / raw)
To: linux-sh
Hi Wolfram,
Thank you for the patch.
On Sunday 23 February 2014 13:40:23 Wolfram Sang wrote:
> From: Wolfram Sang <wsa@sang-engineering.com>
>
> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
> ---
> arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
> index eb2cec8..d3aed50 100644
> --- a/arch/arm/boot/dts/r8a7791.dtsi
> +++ b/arch/arm/boot/dts/r8a7791.dtsi
> @@ -26,6 +26,9 @@
> i2c3 = &i2c3;
> i2c4 = &i2c4;
> i2c5 = &i2c5;
> + i2c6 = &i2c6;
> + i2c7 = &i2c7;
> + i2c8 = &i2c8;
> };
>
> cpus {
> @@ -179,6 +182,7 @@
> <0 17 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + /* The memory map in the User's Manual maps the cores to bus numbers */
> i2c0: i2c@e6508000 {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -230,6 +234,7 @@
> };
>
> i2c5: i2c@e6528000 {
> + /* doesn't need pinmux */
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "renesas,i2c-r8a7791";
> @@ -239,6 +244,37 @@
> status = "disabled";
> };
>
> + i2c6: i2c@e60b0000 {
> + /* doesn't need pinmux */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2cB-r8a7791", "renesas,rmobile-iic";
Wouldn't "renesas,iic-r8a7791" be more appropriate ? It would be closer to
"renesas,rmobile-iic".
> + reg = <0 0xe60b0000 0 0x425>;
> + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@e6500000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2cB-r8a7791", "renesas,rmobile-iic";
> + reg = <0 0xe6500000 0 0x425>;
> + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
> + status = "disabled";
> + };
> +
> + i2c8: i2c@e6510000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2cB-r8a7791", "renesas,rmobile-iic";
> + reg = <0 0xe6510000 0 0x425>;
> + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
> + status = "disabled";
> + };
> +
> pfc: pfc@e6060000 {
> compatible = "renesas,pfc-r8a7791";
> reg = <0 0xe6060000 0 0x250>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 3/4] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi
2014-02-23 12:40 [PATCH 3/4] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi Wolfram Sang
2014-02-23 22:28 ` Laurent Pinchart
@ 2014-02-24 10:34 ` Wolfram Sang
2015-07-21 0:27 ` [PATCH 3/4] ARM: shmobile: r8a7791: Add Audio CTU support on DTSI Kuninori Morimoto
2 siblings, 0 replies; 4+ messages in thread
From: Wolfram Sang @ 2014-02-24 10:34 UTC (permalink / raw)
To: linux-sh
[-- Attachment #1: Type: text/plain, Size: 368 bytes --]
> > + i2c6: i2c@e60b0000 {
> > + /* doesn't need pinmux */
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "renesas,i2cB-r8a7791", "renesas,rmobile-iic";
>
> Wouldn't "renesas,iic-r8a7791" be more appropriate ? It would be closer to
> "renesas,rmobile-iic".
Yes, that is better probably. Still a bit confusing, yet better.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 3/4] ARM: shmobile: r8a7791: Add Audio CTU support on DTSI
2014-02-23 12:40 [PATCH 3/4] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi Wolfram Sang
2014-02-23 22:28 ` Laurent Pinchart
2014-02-24 10:34 ` Wolfram Sang
@ 2015-07-21 0:27 ` Kuninori Morimoto
2 siblings, 0 replies; 4+ messages in thread
From: Kuninori Morimoto @ 2015-07-21 0:27 UTC (permalink / raw)
To: linux-sh
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/boot/dts/r8a7791.dtsi | 16 ++++++++++++++++
include/dt-bindings/clock/r8a7791-clock.h | 2 ++
2 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 07ea2be..cdd55b8 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1311,6 +1311,7 @@
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
#clock-cells = <1>;
@@ -1320,6 +1321,7 @@
R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
R8A7791_CLK_SCU_ALL
R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
+ R8A7791_CLK_SCU_CTU1_MIX1 R8A7791_CLK_SCU_CTU0_MIX0
R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
>;
@@ -1329,6 +1331,7 @@
"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
"scu-all",
"scu-dvc1", "scu-dvc0",
+ "scu-ctu1-mix1", "scu-ctu0-mix0",
"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
};
@@ -1582,6 +1585,7 @@
<&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
<&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
<&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
+ <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
<&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
clock-names = "ssi-all",
@@ -1589,6 +1593,7 @@
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
"src.9", "src.8", "src.7", "src.6", "src.5",
"src.4", "src.3", "src.2", "src.1", "src.0",
+ "ctu.0", "ctu.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
@@ -1605,6 +1610,17 @@
};
};
+ rcar_sound,ctu {
+ ctu00: ctu@0 { };
+ ctu01: ctu@1 { };
+ ctu02: ctu@2 { };
+ ctu03: ctu@3 { };
+ ctu10: ctu@4 { };
+ ctu11: ctu@5 { };
+ ctu12: ctu@6 { };
+ ctu13: ctu@7 { };
+ };
+
rcar_sound,src {
src0: src@0 {
interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index 4022683..dd09b73 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -141,6 +141,8 @@
#define R8A7791_CLK_SCU_ALL 17
#define R8A7791_CLK_SCU_DVC1 18
#define R8A7791_CLK_SCU_DVC0 19
+#define R8A7791_CLK_SCU_CTU1_MIX1 20
+#define R8A7791_CLK_SCU_CTU0_MIX0 21
#define R8A7791_CLK_SCU_SRC9 22
#define R8A7791_CLK_SCU_SRC8 23
#define R8A7791_CLK_SCU_SRC7 24
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-07-21 0:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-23 12:40 [PATCH 3/4] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi Wolfram Sang
2014-02-23 22:28 ` Laurent Pinchart
2014-02-24 10:34 ` Wolfram Sang
2015-07-21 0:27 ` [PATCH 3/4] ARM: shmobile: r8a7791: Add Audio CTU support on DTSI Kuninori Morimoto
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.