* Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi
[not found] <alsa-project/alsa-ucm-conf/pr/537@alsa-project.org>
@ 2025-03-28 4:40 ` GitHub pull_request - opened
2025-03-28 4:53 ` GitHub pull_request - edited
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: GitHub pull_request - opened @ 2025-03-28 4:40 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #537 was opened from austinthiel:
Referenced [this guide](https://askubuntu.com/a/1469066) to get SPDIF out working on my ASUS B850-I Gaming WiFi
[alsa-info.txt](https://github.com/user-attachments/files/19498803/alsa-info.txt)
In case it's relevant, using a sample rate of 48kHz is required. I found that other sample rate produces very low quality, garbled audio.
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi
[not found] <alsa-project/alsa-ucm-conf/pr/537@alsa-project.org>
2025-03-28 4:40 ` Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi GitHub pull_request - opened
@ 2025-03-28 4:53 ` GitHub pull_request - edited
2025-03-28 4:54 ` GitHub pull_request - edited
2025-03-28 4:56 ` GitHub pull_request - edited
3 siblings, 0 replies; 4+ messages in thread
From: GitHub pull_request - edited @ 2025-03-28 4:53 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #537 was edited from austinthiel:
Referenced [this guide](https://askubuntu.com/a/1469066) to get SPDIF out working on my ASUS B850-I Gaming WiFi
[alsa-info.txt](https://github.com/user-attachments/files/19499096/alsa-info.txt)
In case it's relevant, using a sample rate of 48kHz is required. I found that other sample rate produces very low quality, garbled audio.
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi
[not found] <alsa-project/alsa-ucm-conf/pr/537@alsa-project.org>
2025-03-28 4:40 ` Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi GitHub pull_request - opened
2025-03-28 4:53 ` GitHub pull_request - edited
@ 2025-03-28 4:54 ` GitHub pull_request - edited
2025-03-28 4:56 ` GitHub pull_request - edited
3 siblings, 0 replies; 4+ messages in thread
From: GitHub pull_request - edited @ 2025-03-28 4:54 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #537 was edited from austinthiel:
Referenced [this guide](https://askubuntu.com/a/1469066) to get SPDIF out working on my ASUS B850-I Gaming WiFi
[alsa-info.txt](https://github.com/user-attachments/files/19499096/alsa-info.txt)
In case it's relevant, using a sample rate of 48kHz is required. I found that other sample rate produces very low quality, garbled audio. I read that this is because SPDIF only supports 48kHz in hardware, and any other sample rates require the Realtek drivers.
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi
[not found] <alsa-project/alsa-ucm-conf/pr/537@alsa-project.org>
` (2 preceding siblings ...)
2025-03-28 4:54 ` GitHub pull_request - edited
@ 2025-03-28 4:56 ` GitHub pull_request - edited
3 siblings, 0 replies; 4+ messages in thread
From: GitHub pull_request - edited @ 2025-03-28 4:56 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #537 was edited from austinthiel:
[Link to open issue](https://github.com/alsa-project/alsa-ucm-conf/issues/534#issue-2948397275)
I referenced [this guide](https://askubuntu.com/a/1469066) to get SPDIF out working on my ASUS B850-I Gaming WiFi
[alsa-info.txt](https://github.com/user-attachments/files/19499096/alsa-info.txt)
In case it's relevant, using a sample rate of 48kHz is required. I found that other sample rate produces very low quality, garbled audio. I read that this is because SPDIF only supports 48kHz in hardware, and any other sample rates require the Realtek drivers.
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2025-03-28 4:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <alsa-project/alsa-ucm-conf/pr/537@alsa-project.org>
2025-03-28 4:40 ` Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi GitHub pull_request - opened
2025-03-28 4:53 ` GitHub pull_request - edited
2025-03-28 4:54 ` GitHub pull_request - edited
2025-03-28 4:56 ` GitHub pull_request - edited
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.