* Issue: Sending ATT Signed Write Command via btgatt-client
@ 2015-05-28 7:17 Ankur Patel
2015-05-28 7:47 ` Szymon Janc
0 siblings, 1 reply; 5+ messages in thread
From: Ankur Patel @ 2015-05-28 7:17 UTC (permalink / raw)
To: linux-bluetooth@vger.kernel.org
Hello Folks,
I would like to Send Signed Write command to modify a characteristic on the Host. It failed into the Error: Failed to initiate write without response procedure
Information on Controller (May be helpful):
root@imx28evk:~# cat /proc/crypto
name : ecb(aes)
driver : ecb-aes-dcp
module : kernel
priority : 400
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 0
geniv : <default>
root@imx28evk:~# btmgmt info
Index list with 1 item
hci0: Primary controller
addr 1C:BA:8C:86:81:21 version 6 manufacturer 13 class 0x000000
supported settings: powered connectable fast-connectable discoverable bondable link-security ssp br/edr hs le advertising debug-keys privacy
current settings: powered connectable discoverable bondable link-security br/edr le advertising
name testbt
short name
root@imx28evk:~/tools# btgatt-client -d 00:1B:DC:07:2E:85
Connecting to device... Done
Service Added - UUID: 00001800-0000-1000-8000-00805f9b34fb start: 0x0001 end: 0x000d
Service Added - UUID: 00001801-0000-1000-8000-00805f9b34fb start: 0x0014 end: 0x0016
[GATT client]# GATT discovery procedures complete
[GATT client]# ...
[GATT client]# set-sign-key -c efcdab8967452301efcdab8967452301
[GATT client]# write-value -s -w 0xd 01
Failed to initiate write without response procedure
I tried to trace the error as:
bt_gatt_client_write_without_response(..) -> bt_att_send(..) -> create_att_send_op(..) -> encode_pdu(..) -> bt_crypto_sign_att(..) -> As att->crypto is NULL it returns false.
I tried to check the reason for att->crypto to be NULL. Found that while initialization of the btgatt-client, under bt_crypto_new() -> crypto->ecb_aes = ecb_aes_setup();. It fails under ecb_aes_setup function. From the output of /proc/crypto, the kernel has the support. I am wondering how to enable the crypto?
Regards,
Ankur.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Issue: Sending ATT Signed Write Command via btgatt-client
2015-05-28 7:17 Issue: Sending ATT Signed Write Command via btgatt-client Ankur Patel
@ 2015-05-28 7:47 ` Szymon Janc
2015-05-28 8:37 ` Ankur Patel
0 siblings, 1 reply; 5+ messages in thread
From: Szymon Janc @ 2015-05-28 7:47 UTC (permalink / raw)
To: Ankur Patel; +Cc: linux-bluetooth@vger.kernel.org
Hi Ankur,
On Thursday 28 of May 2015 16:47:09 Ankur Patel wrote:
> Hello Folks,
>
> I would like to Send Signed Write command to modify a characteristic on the
> Host. It failed into the Error: Failed to initiate write without response
> procedure
>
> Information on Controller (May be helpful):
> root@imx28evk:~# cat /proc/crypto
> name : ecb(aes)
> driver : ecb-aes-dcp
> module : kernel
> priority : 400
> refcnt : 1
> selftest : passed
> type : ablkcipher
> async : yes
> blocksize : 16
> min keysize : 16
> max keysize : 32
> ivsize : 0
> geniv : <default>
>
> root@imx28evk:~# btmgmt info
> Index list with 1 item
> hci0: Primary controller
> addr 1C:BA:8C:86:81:21 version 6 manufacturer 13 class 0x000000
> supported settings: powered connectable fast-connectable
> discoverable bondable link-security ssp br/edr hs le advertising debug-keys
> privacy current settings: powered connectable discoverable bondable
> link-security br/edr le advertising name testbt
> short name
>
>
> root@imx28evk:~/tools# btgatt-client -d 00:1B:DC:07:2E:85
> Connecting to device... Done
> Service Added - UUID: 00001800-0000-1000-8000-00805f9b34fb start: 0x0001
> end: 0x000d Service Added - UUID: 00001801-0000-1000-8000-00805f9b34fb
> start: 0x0014 end: 0x0016 [GATT client]# GATT discovery procedures complete
> [GATT client]# ...
> [GATT client]# set-sign-key -c efcdab8967452301efcdab8967452301
> [GATT client]# write-value -s -w 0xd 01
> Failed to initiate write without response procedure
>
> I tried to trace the error as:
> bt_gatt_client_write_without_response(..) -> bt_att_send(..) ->
> create_att_send_op(..) -> encode_pdu(..) -> bt_crypto_sign_att(..) -> As
> att->crypto is NULL it returns false.
>
> I tried to check the reason for att->crypto to be NULL. Found that while
> initialization of the btgatt-client, under bt_crypto_new() ->
> crypto->ecb_aes = ecb_aes_setup();. It fails under ecb_aes_setup function.
> From the output of /proc/crypto, the kernel has the support. I am wondering
> how to enable the crypto?
Most likely following options are missing in your kernel configuration:
CONFIG_CRYPTO_CMAC
CONFIG_CRYPTO_USER_API
CONFIG_CRYPTO_USER_API_HASH
CONFIG_CRYPTO_USER_API_SKCIPHER
--
BR
Szymon Janc
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: Issue: Sending ATT Signed Write Command via btgatt-client
2015-05-28 7:47 ` Szymon Janc
@ 2015-05-28 8:37 ` Ankur Patel
2015-05-28 9:15 ` Szymon Janc
0 siblings, 1 reply; 5+ messages in thread
From: Ankur Patel @ 2015-05-28 8:37 UTC (permalink / raw)
To: Szymon Janc; +Cc: linux-bluetooth@vger.kernel.org
> Hi Ankur,
>
> On Thursday 28 of May 2015 16:47:09 Ankur Patel wrote:
> > Hello Folks,
> >
> > I would like to Send Signed Write command to modify a characteristic
> > on the Host. It failed into the Error: Failed to initiate write
> > without response procedure
> >
> > Information on Controller (May be helpful):
> > root@imx28evk:~# cat /proc/crypto
> > name : ecb(aes)
> > driver : ecb-aes-dcp
> > module : kernel
> > priority : 400
> > refcnt : 1
> > selftest : passed
> > type : ablkcipher
> > async : yes
> > blocksize : 16
> > min keysize : 16
> > max keysize : 32
> > ivsize : 0
> > geniv : <default>
> >
> > root@imx28evk:~# btmgmt info
> > Index list with 1 item
> > hci0: Primary controller
> > addr 1C:BA:8C:86:81:21 version 6 manufacturer 13 class 0x000000
> > supported settings: powered connectable fast-connectable
> > discoverable bondable link-security ssp br/edr hs le advertising
> > debug-keys privacy current settings: powered connectable discoverable
> > bondable link-security br/edr le advertising name testbt
> > short name
> >
> >
> > root@imx28evk:~/tools# btgatt-client -d 00:1B:DC:07:2E:85 Connecting
> > to device... Done Service Added - UUID:
> > 00001800-0000-1000-8000-00805f9b34fb start: 0x0001
> > end: 0x000d Service Added - UUID: 00001801-0000-1000-8000-00805f9b34fb
> > start: 0x0014 end: 0x0016 [GATT client]# GATT discovery procedures
> > complete [GATT client]# ...
> > [GATT client]# set-sign-key -c efcdab8967452301efcdab8967452301 [GATT
> > client]# write-value -s -w 0xd 01 Failed to initiate write without
> > response procedure
> >
> > I tried to trace the error as:
> > bt_gatt_client_write_without_response(..) -> bt_att_send(..) ->
> > create_att_send_op(..) -> encode_pdu(..) -> bt_crypto_sign_att(..) ->
> > As
> > att->crypto is NULL it returns false.
> >
> > I tried to check the reason for att->crypto to be NULL. Found that
> > while initialization of the btgatt-client, under bt_crypto_new() ->
> > crypto->ecb_aes = ecb_aes_setup();. It fails under ecb_aes_setup
> function.
> > From the output of /proc/crypto, the kernel has the support. I am
> > wondering how to enable the crypto?
>
> Most likely following options are missing in your kernel configuration:
> CONFIG_CRYPTO_CMAC
> CONFIG_CRYPTO_USER_API
> CONFIG_CRYPTO_USER_API_HASH
> CONFIG_CRYPTO_USER_API_SKCIPHER
>
It Worked!!. Thank you Szymon for quick response.
Now I am able to send the Signed Write Command but without Authentication Signature. If I understood it correctly,
1) Set the Signature using [GATT client]# set-sign-key -c efcdab8967452301efcdab8967452301
2) Execute command: write-value -s -w 0xd 01 to send write command.
I couldn't able to see the signature on the Sniffer.
In addition on the Controller I see below output of root@imx28evk:~#Btmon:
< ACL Data TX: Handle 1025 flags 0x00 dlen 20 [hci0] 2394.331806
ATT: Signed Write Command (0xd2) len 15
0d 00 01 03 00 00 00 47 8a ec df 50 fc a5 ba .......G...P...
> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 2394.462600
Num handles: 1
Handle: 1025
Count: 1
Regards,
Ankur
> --
> BR
> Szymon Janc
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Issue: Sending ATT Signed Write Command via btgatt-client
2015-05-28 8:37 ` Ankur Patel
@ 2015-05-28 9:15 ` Szymon Janc
2015-05-28 9:41 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 5+ messages in thread
From: Szymon Janc @ 2015-05-28 9:15 UTC (permalink / raw)
To: Ankur Patel; +Cc: linux-bluetooth@vger.kernel.org
Hi Ankur,
On Thursday 28 of May 2015 18:07:48 Ankur Patel wrote:
> > Hi Ankur,
> >
> > On Thursday 28 of May 2015 16:47:09 Ankur Patel wrote:
> > > Hello Folks,
> > >
> > > I would like to Send Signed Write command to modify a characteristic
> > > on the Host. It failed into the Error: Failed to initiate write
> > > without response procedure
> > >
> > > Information on Controller (May be helpful):
> > > root@imx28evk:~# cat /proc/crypto
> > > name : ecb(aes)
> > > driver : ecb-aes-dcp
> > > module : kernel
> > > priority : 400
> > > refcnt : 1
> > > selftest : passed
> > > type : ablkcipher
> > > async : yes
> > > blocksize : 16
> > > min keysize : 16
> > > max keysize : 32
> > > ivsize : 0
> > > geniv : <default>
> > >
> > > root@imx28evk:~# btmgmt info
> > > Index list with 1 item
> > > hci0: Primary controller
> > >
> > > addr 1C:BA:8C:86:81:21 version 6 manufacturer 13 class 0x000000
> > > supported settings: powered connectable fast-connectable
> > >
> > > discoverable bondable link-security ssp br/edr hs le advertising
> > > debug-keys privacy current settings: powered connectable discoverable
> > > bondable link-security br/edr le advertising name testbt
> > >
> > > short name
> > >
> > > root@imx28evk:~/tools# btgatt-client -d 00:1B:DC:07:2E:85 Connecting
> > > to device... Done Service Added - UUID:
> > > 00001800-0000-1000-8000-00805f9b34fb start: 0x0001
> > > end: 0x000d Service Added - UUID: 00001801-0000-1000-8000-00805f9b34fb
> > > start: 0x0014 end: 0x0016 [GATT client]# GATT discovery procedures
> > > complete [GATT client]# ...
> > > [GATT client]# set-sign-key -c efcdab8967452301efcdab8967452301 [GATT
> > > client]# write-value -s -w 0xd 01 Failed to initiate write without
> > > response procedure
> > >
> > > I tried to trace the error as:
> > > bt_gatt_client_write_without_response(..) -> bt_att_send(..) ->
> > > create_att_send_op(..) -> encode_pdu(..) -> bt_crypto_sign_att(..) ->
> > > As
> > > att->crypto is NULL it returns false.
> > >
> > > I tried to check the reason for att->crypto to be NULL. Found that
> > > while initialization of the btgatt-client, under bt_crypto_new() ->
> > > crypto->ecb_aes = ecb_aes_setup();. It fails under ecb_aes_setup
> >
> > function.
> >
> > > From the output of /proc/crypto, the kernel has the support. I am
> > > wondering how to enable the crypto?
> >
> > Most likely following options are missing in your kernel configuration:
> > CONFIG_CRYPTO_CMAC
> > CONFIG_CRYPTO_USER_API
> > CONFIG_CRYPTO_USER_API_HASH
> > CONFIG_CRYPTO_USER_API_SKCIPHER
>
> It Worked!!. Thank you Szymon for quick response.
>
> Now I am able to send the Signed Write Command but without Authentication
> Signature. If I understood it correctly, 1) Set the Signature using [GATT
> client]# set-sign-key -c efcdab8967452301efcdab8967452301 2) Execute
> command: write-value -s -w 0xd 01 to send write command.
>
> I couldn't able to see the signature on the Sniffer.
> In addition on the Controller I see below output of root@imx28evk:~#Btmon:
>
> < ACL Data TX: Handle 1025 flags 0x00 dlen 20
>
>
> [hci0] 2394.331806 ATT: Signed Write Command (0xd2) len 15
> 0d 00 01 03 00 00 00 47 8a ec df 50 fc a5 ba .......G...P...
This looks OK to me.
0d 00 01 03 00 00 00 47 8a ec df 50 fc a5 ba
handle data signature
Check CoreSpec 4.2 Vol3, Part F, p. 3.4.5.4 (pdf page 2194) for details.
--
BR
Szymon Janc
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Issue: Sending ATT Signed Write Command via btgatt-client
2015-05-28 9:15 ` Szymon Janc
@ 2015-05-28 9:41 ` Luiz Augusto von Dentz
0 siblings, 0 replies; 5+ messages in thread
From: Luiz Augusto von Dentz @ 2015-05-28 9:41 UTC (permalink / raw)
To: Szymon Janc; +Cc: Ankur Patel, linux-bluetooth@vger.kernel.org
Hi,
On Thu, May 28, 2015 at 12:15 PM, Szymon Janc <szymon.janc@tieto.com> wrote:
> Hi Ankur,
>
> On Thursday 28 of May 2015 18:07:48 Ankur Patel wrote:
>> > Hi Ankur,
>> >
>> > On Thursday 28 of May 2015 16:47:09 Ankur Patel wrote:
>> > > Hello Folks,
>> > >
>> > > I would like to Send Signed Write command to modify a characteristic
>> > > on the Host. It failed into the Error: Failed to initiate write
>> > > without response procedure
>> > >
>> > > Information on Controller (May be helpful):
>> > > root@imx28evk:~# cat /proc/crypto
>> > > name : ecb(aes)
>> > > driver : ecb-aes-dcp
>> > > module : kernel
>> > > priority : 400
>> > > refcnt : 1
>> > > selftest : passed
>> > > type : ablkcipher
>> > > async : yes
>> > > blocksize : 16
>> > > min keysize : 16
>> > > max keysize : 32
>> > > ivsize : 0
>> > > geniv : <default>
>> > >
>> > > root@imx28evk:~# btmgmt info
>> > > Index list with 1 item
>> > > hci0: Primary controller
>> > >
>> > > addr 1C:BA:8C:86:81:21 version 6 manufacturer 13 class 0x000000
>> > > supported settings: powered connectable fast-connectable
>> > >
>> > > discoverable bondable link-security ssp br/edr hs le advertising
>> > > debug-keys privacy current settings: powered connectable discoverable
>> > > bondable link-security br/edr le advertising name testbt
>> > >
>> > > short name
>> > >
>> > > root@imx28evk:~/tools# btgatt-client -d 00:1B:DC:07:2E:85 Connecting
>> > > to device... Done Service Added - UUID:
>> > > 00001800-0000-1000-8000-00805f9b34fb start: 0x0001
>> > > end: 0x000d Service Added - UUID: 00001801-0000-1000-8000-00805f9b34fb
>> > > start: 0x0014 end: 0x0016 [GATT client]# GATT discovery procedures
>> > > complete [GATT client]# ...
>> > > [GATT client]# set-sign-key -c efcdab8967452301efcdab8967452301 [GATT
>> > > client]# write-value -s -w 0xd 01 Failed to initiate write without
>> > > response procedure
>> > >
>> > > I tried to trace the error as:
>> > > bt_gatt_client_write_without_response(..) -> bt_att_send(..) ->
>> > > create_att_send_op(..) -> encode_pdu(..) -> bt_crypto_sign_att(..) ->
>> > > As
>> > > att->crypto is NULL it returns false.
>> > >
>> > > I tried to check the reason for att->crypto to be NULL. Found that
>> > > while initialization of the btgatt-client, under bt_crypto_new() ->
>> > > crypto->ecb_aes = ecb_aes_setup();. It fails under ecb_aes_setup
>> >
>> > function.
>> >
>> > > From the output of /proc/crypto, the kernel has the support. I am
>> > > wondering how to enable the crypto?
>> >
>> > Most likely following options are missing in your kernel configuration:
>> > CONFIG_CRYPTO_CMAC
>> > CONFIG_CRYPTO_USER_API
>> > CONFIG_CRYPTO_USER_API_HASH
>> > CONFIG_CRYPTO_USER_API_SKCIPHER
>>
>> It Worked!!. Thank you Szymon for quick response.
>>
>> Now I am able to send the Signed Write Command but without Authentication
>> Signature. If I understood it correctly, 1) Set the Signature using [GATT
>> client]# set-sign-key -c efcdab8967452301efcdab8967452301 2) Execute
>> command: write-value -s -w 0xd 01 to send write command.
>>
>> I couldn't able to see the signature on the Sniffer.
>> In addition on the Controller I see below output of root@imx28evk:~#Btmon:
>>
>> < ACL Data TX: Handle 1025 flags 0x00 dlen 20
>>
>>
>> [hci0] 2394.331806 ATT: Signed Write Command (0xd2) len 15
>> 0d 00 01 03 00 00 00 47 8a ec df 50 fc a5 ba .......G...P...
>
> This looks OK to me.
> 0d 00 01 03 00 00 00 47 8a ec df 50 fc a5 ba
> handle data signature
>
>
> Check CoreSpec 4.2 Vol3, Part F, p. 3.4.5.4 (pdf page 2194) for details.
We could probably improve btmon to print out the handle, data and
signature separately.
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-05-28 9:41 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-05-28 7:17 Issue: Sending ATT Signed Write Command via btgatt-client Ankur Patel
2015-05-28 7:47 ` Szymon Janc
2015-05-28 8:37 ` Ankur Patel
2015-05-28 9:15 ` Szymon Janc
2015-05-28 9:41 ` Luiz Augusto von Dentz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.