All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add GPIO clocks
Date: Sat, 21 Feb 2015 22:11:25 +0000	[thread overview]
Message-ID: <1831753.Dnjo3xKPJv@wasted.cogentembedded.com> (raw)
In-Reply-To: <6954455.LyoCrfjM8R@wasted.cogentembedded.com>

Describe the GPIO clocks in the R8A7794 device tree.

Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7794.dtsi |   22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -651,16 +651,22 @@
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
-				<&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
-			clock-indices = <
-				R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
-				R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
-				R8A7794_CLK_I2C0
-			>;
+			clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
+					 R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
+					 R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
+					 R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+					 R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+					 R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
+					 R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
 			clock-output-names -				"qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+				"gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
+				"gpio1", "gpio0", "qspi_mod",
+				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";


WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add GPIO clocks
Date: Sun, 22 Feb 2015 01:11:25 +0300	[thread overview]
Message-ID: <1831753.Dnjo3xKPJv@wasted.cogentembedded.com> (raw)
In-Reply-To: <6954455.LyoCrfjM8R@wasted.cogentembedded.com>

Describe the GPIO clocks in the R8A7794 device tree.

Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7794.dtsi |   22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -651,16 +651,22 @@
 		mstp9_clks: mstp9_clks at e6150994 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
-				<&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
-			clock-indices = <
-				R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
-				R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
-				R8A7794_CLK_I2C0
-			>;
+			clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
+					 R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
+					 R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
+					 R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+					 R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+					 R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
+					 R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
 			clock-output-names =
-				"qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+				"gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
+				"gpio1", "gpio0", "qspi_mod",
+				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
 		mstp11_clks: mstp11_clks at e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";

WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-sh@vger.kernel.org, robh+dt@kernel.org,
	pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add GPIO clocks
Date: Sun, 22 Feb 2015 01:11:25 +0300	[thread overview]
Message-ID: <1831753.Dnjo3xKPJv@wasted.cogentembedded.com> (raw)
In-Reply-To: <6954455.LyoCrfjM8R@wasted.cogentembedded.com>

Describe the GPIO clocks in the R8A7794 device tree.

Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7794.dtsi |   22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -651,16 +651,22 @@
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
-				<&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
-			clock-indices = <
-				R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
-				R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
-				R8A7794_CLK_I2C0
-			>;
+			clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
+					 R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
+					 R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
+					 R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+					 R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+					 R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
+					 R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
 			clock-output-names =
-				"qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+				"gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
+				"gpio1", "gpio0", "qspi_mod",
+				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";


  reply	other threads:[~2015-02-21 22:11 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-21 22:10 [PATCH 0/2] Add R8A7794 GPIO DT support Sergei Shtylyov
2015-02-21 22:10 ` Sergei Shtylyov
2015-02-21 22:10 ` Sergei Shtylyov
2015-02-21 22:11 ` Sergei Shtylyov [this message]
2015-02-21 22:11   ` [PATCH 1/2] ARM: shmobile: r8a7794: add GPIO clocks Sergei Shtylyov
2015-02-21 22:11   ` Sergei Shtylyov
2015-02-23 11:08   ` Geert Uytterhoeven
2015-02-23 11:08     ` Geert Uytterhoeven
2015-02-23 11:08     ` Geert Uytterhoeven
2015-02-25  9:57   ` Laurent Pinchart
2015-02-25  9:57     ` Laurent Pinchart
2015-02-25  9:57     ` Laurent Pinchart
2015-02-21 22:12 ` [PATCH 2/2] ARM: shmobile: r8a7794: add GPIO DT support Sergei Shtylyov
2015-02-21 22:12   ` Sergei Shtylyov
2015-02-21 22:12   ` Sergei Shtylyov
2015-02-23 11:11   ` Geert Uytterhoeven
2015-02-23 11:11     ` Geert Uytterhoeven
2015-02-23 11:11     ` Geert Uytterhoeven
2015-02-25 10:11   ` Laurent Pinchart
2015-02-25 10:11     ` Laurent Pinchart
2015-02-25 10:11     ` Laurent Pinchart
2015-02-25 10:27     ` Geert Uytterhoeven
2015-02-25 10:27       ` Geert Uytterhoeven
2015-02-25 10:27       ` Geert Uytterhoeven
2015-02-25 22:10       ` Laurent Pinchart
2015-02-25 22:10         ` Laurent Pinchart
2015-02-25 22:10         ` Laurent Pinchart
2015-02-25 14:04     ` Sergei Shtylyov
2015-02-25 14:04       ` Sergei Shtylyov
2015-02-25 14:04       ` Sergei Shtylyov
2015-02-25 14:08       ` Laurent Pinchart
2015-02-25 14:08         ` Laurent Pinchart
2015-02-25 14:08         ` Laurent Pinchart
2015-02-23 22:00 ` [PATCH 0/2] Add R8A7794 " Simon Horman
2015-02-23 22:00   ` Simon Horman
2015-02-23 22:00   ` Simon Horman
2015-02-23 23:19   ` Simon Horman
2015-02-23 23:19     ` Simon Horman
2015-02-23 23:19     ` Simon Horman
2015-02-24 14:43     ` Sergei Shtylyov
2015-02-24 14:43       ` Sergei Shtylyov
2015-02-24 14:43       ` Sergei Shtylyov
2015-02-25  8:07       ` Simon Horman
2015-02-25  8:07         ` Simon Horman
2015-02-25  8:07         ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1831753.Dnjo3xKPJv@wasted.cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.