* ucm2: sof: hdmi: Add 5.1 and 7.1 varriants of HDMI devices when using IPC4
[not found] <alsa-project/alsa-ucm-conf/pr/633@alsa-project.org>
@ 2025-10-31 11:04 ` GitHub pull_request - opened
2025-10-31 11:04 ` ucm2: sof: hdmi: Add 5.1 and 7.1 variants " GitHub pull_request - edited
2025-12-19 11:05 ` GitHub pull_request - reopened
2 siblings, 0 replies; 3+ messages in thread
From: GitHub pull_request - opened @ 2025-10-31 11:04 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #633 was opened from ujfalusi:
Systems using IPC4 can support up to 8 channels of audio (and passthrough) via HDMI.
In UCM the default PlaybackChannels is set to 2, which prevents users from selecting multichannel configurations.
When probing the card, Pipewire will drop configurations that are not supported either by the PCM device or based on ELD information.
This means that if the equipment supports only stereo then the 5.1 and 7.1 variants should not be visible, if the equipment is 5.1 capable, then only the 7.1 variant is removed.
The kernel will refine the PCM parameters based on the ELD information as wall when https://lore.kernel.org/linux-sound/20251029073600.13624-1-peter.ujfalusi@linux.intel.com/ is applied.
@perexg, @wtay, @ford-prefect, is this something which can help PW and user space to handle the HDMI a bit better with SOF?
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/633
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/633.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 3+ messages in thread* ucm2: sof: hdmi: Add 5.1 and 7.1 variants of HDMI devices when using IPC4
[not found] <alsa-project/alsa-ucm-conf/pr/633@alsa-project.org>
2025-10-31 11:04 ` ucm2: sof: hdmi: Add 5.1 and 7.1 varriants of HDMI devices when using IPC4 GitHub pull_request - opened
@ 2025-10-31 11:04 ` GitHub pull_request - edited
2025-12-19 11:05 ` GitHub pull_request - reopened
2 siblings, 0 replies; 3+ messages in thread
From: GitHub pull_request - edited @ 2025-10-31 11:04 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #633 was edited from ujfalusi:
Systems using IPC4 can support up to 8 channels of audio (and passthrough) via HDMI.
In UCM the default PlaybackChannels is set to 2, which prevents users from selecting multichannel configurations.
When probing the card, Pipewire will drop configurations that are not supported either by the PCM device or based on ELD information.
This means that if the equipment supports only stereo then the 5.1 and 7.1 variants should not be visible, if the equipment is 5.1 capable, then only the 7.1 variant is removed.
The kernel will refine the PCM parameters based on the ELD information as wall when https://lore.kernel.org/linux-sound/20251029073600.13624-1-peter.ujfalusi@linux.intel.com/ is applied.
@perexg, @wtay, @ford-prefect, is this something which can help PW and user space to handle the HDMI a bit better with SOF?
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/633
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/633.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 3+ messages in thread* ucm2: sof: hdmi: Add 5.1 and 7.1 variants of HDMI devices when using IPC4
[not found] <alsa-project/alsa-ucm-conf/pr/633@alsa-project.org>
2025-10-31 11:04 ` ucm2: sof: hdmi: Add 5.1 and 7.1 varriants of HDMI devices when using IPC4 GitHub pull_request - opened
2025-10-31 11:04 ` ucm2: sof: hdmi: Add 5.1 and 7.1 variants " GitHub pull_request - edited
@ 2025-12-19 11:05 ` GitHub pull_request - reopened
2 siblings, 0 replies; 3+ messages in thread
From: GitHub pull_request - reopened @ 2025-12-19 11:05 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #633 was reopened from ujfalusi:
Systems using IPC4 can support up to 8 channels of audio (and passthrough) via HDMI.
In UCM the default PlaybackChannels is set to 2, which prevents users from selecting multichannel configurations.
When probing the card, Pipewire will drop configurations that are not supported either by the PCM device or based on ELD information.
This means that if the equipment supports only stereo then the 5.1 and 7.1 variants should not be visible, if the equipment is 5.1 capable, then only the 7.1 variant is removed.
The kernel will refine the PCM parameters based on the ELD information as wall when https://lore.kernel.org/linux-sound/20251029073600.13624-1-peter.ujfalusi@linux.intel.com/ is applied.
@perexg, @wtay, @ford-prefect, is this something which can help PW and user space to handle the HDMI a bit better with SOF?
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/633
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/633.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 3+ messages in thread