From: "Heiko Stübner" <heiko@sntech.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>,
Benjamin Bara <benjamin.bara@skidata.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Klaus Goger <klaus.goger@theobroma-systems.com>,
Lukasz Czechowski <lukasz.czechowski@thaumatec.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, stable@vger.kernel.org
Subject: Re: [PATCH v2 2/5] dt-bindings: usb: cypress,hx3: Add support for all variants
Date: Thu, 15 May 2025 14:42:13 +0200 [thread overview]
Message-ID: <18791204.sWSEgdgrri@diego> (raw)
In-Reply-To: <2025051550-polish-prude-ed56@gregkh>
Am Donnerstag, 15. Mai 2025, 13:49:19 Mitteleuropäische Sommerzeit schrieb Greg Kroah-Hartman:
> On Thu, May 15, 2025 at 01:43:59PM +0200, Heiko Stübner wrote:
> > Am Freitag, 25. April 2025, 17:18:07 Mitteleuropäische Sommerzeit schrieb Lukasz Czechowski:
> > > The Cypress HX3 hubs use different default PID value depending
> > > on the variant. Update compatibles list.
> > > Becasuse all hub variants use the same driver data, allow the
> > > dt node to have two compatibles: leftmost which matches the HW
> > > exactly, and the second one as fallback.
> > >
> > > Fixes: 1eca51f58a10 ("dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family")
> > > Cc: stable@vger.kernel.org # 6.6
> > > Cc: stable@vger.kernel.org # Backport of the patch ("dt-bindings: usb: usb-device: relax compatible pattern to a contains") from list: https://lore.kernel.org/linux-usb/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de/
> > > Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver
> > > Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
> >
> > Looking at linux-next, it seems like patch1 of this series was applied [0].
>
> It is in 6.15-rc6, not "just" linux-next
yeah, I mainly used linux-next to see if a part of this series was applied
anywhere :-) . Because neither my inbox nor the list archives seem to have
gotten any form of "patch applied" mail.
> > The general convention would be for the binding (this patch) also going
> > through a driver tree.
> >
> > I guess I _could_ apply it together with the board-level patches, but
> > for that would need an Ack from Greg .
> >
> > @Greg, do you want to merge this patch ?
>
> I thought a new series was going to be sent for some reason, which would
> make this a lot easier. But if you want to just take this one now,
> that's fine with me as it's not in my queue.
As we're close to -rc7 now, I assume the chance is low of someone
needing this before 6.16-rc1, so thanks for the blessing, I'll do that :-) .
Heiko
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>,
Benjamin Bara <benjamin.bara@skidata.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Klaus Goger <klaus.goger@theobroma-systems.com>,
Lukasz Czechowski <lukasz.czechowski@thaumatec.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, stable@vger.kernel.org
Subject: Re: [PATCH v2 2/5] dt-bindings: usb: cypress,hx3: Add support for all variants
Date: Thu, 15 May 2025 14:42:13 +0200 [thread overview]
Message-ID: <18791204.sWSEgdgrri@diego> (raw)
In-Reply-To: <2025051550-polish-prude-ed56@gregkh>
Am Donnerstag, 15. Mai 2025, 13:49:19 Mitteleuropäische Sommerzeit schrieb Greg Kroah-Hartman:
> On Thu, May 15, 2025 at 01:43:59PM +0200, Heiko Stübner wrote:
> > Am Freitag, 25. April 2025, 17:18:07 Mitteleuropäische Sommerzeit schrieb Lukasz Czechowski:
> > > The Cypress HX3 hubs use different default PID value depending
> > > on the variant. Update compatibles list.
> > > Becasuse all hub variants use the same driver data, allow the
> > > dt node to have two compatibles: leftmost which matches the HW
> > > exactly, and the second one as fallback.
> > >
> > > Fixes: 1eca51f58a10 ("dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family")
> > > Cc: stable@vger.kernel.org # 6.6
> > > Cc: stable@vger.kernel.org # Backport of the patch ("dt-bindings: usb: usb-device: relax compatible pattern to a contains") from list: https://lore.kernel.org/linux-usb/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de/
> > > Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver
> > > Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
> >
> > Looking at linux-next, it seems like patch1 of this series was applied [0].
>
> It is in 6.15-rc6, not "just" linux-next
yeah, I mainly used linux-next to see if a part of this series was applied
anywhere :-) . Because neither my inbox nor the list archives seem to have
gotten any form of "patch applied" mail.
> > The general convention would be for the binding (this patch) also going
> > through a driver tree.
> >
> > I guess I _could_ apply it together with the board-level patches, but
> > for that would need an Ack from Greg .
> >
> > @Greg, do you want to merge this patch ?
>
> I thought a new series was going to be sent for some reason, which would
> make this a lot easier. But if you want to just take this one now,
> that's fine with me as it's not in my queue.
As we're close to -rc7 now, I assume the chance is low of someone
needing this before 6.16-rc1, so thanks for the blessing, I'll do that :-) .
Heiko
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-05-15 12:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-25 15:18 [PATCH v2 0/5] Fix onboard USB hub instability on RK3399 Puma SoM Lukasz Czechowski
2025-04-25 15:18 ` Lukasz Czechowski
2025-04-25 15:18 ` [PATCH v2 1/5] usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs Lukasz Czechowski
2025-04-25 15:18 ` Lukasz Czechowski
2025-05-13 16:12 ` Heiko Stübner
2025-05-13 16:12 ` Heiko Stübner
2025-04-25 15:18 ` [PATCH v2 2/5] dt-bindings: usb: cypress,hx3: Add support for all variants Lukasz Czechowski
2025-04-25 15:18 ` Lukasz Czechowski
2025-05-09 18:38 ` Rob Herring (Arm)
2025-05-09 18:38 ` Rob Herring (Arm)
2025-05-15 11:43 ` Heiko Stübner
2025-05-15 11:43 ` Heiko Stübner
2025-05-15 11:49 ` Greg Kroah-Hartman
2025-05-15 11:49 ` Greg Kroah-Hartman
2025-05-15 12:42 ` Heiko Stübner [this message]
2025-05-15 12:42 ` Heiko Stübner
2025-04-25 15:18 ` [PATCH v2 3/5] arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma Lukasz Czechowski
2025-04-25 15:18 ` Lukasz Czechowski
2025-04-25 15:18 ` [PATCH v2 4/5] arm64: dts: rockchip: disable unrouted USB controllers and PHY " Lukasz Czechowski
2025-04-25 15:18 ` Lukasz Czechowski
2025-04-25 15:18 ` [PATCH v2 5/5] arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou Lukasz Czechowski
2025-04-25 15:18 ` Lukasz Czechowski
2025-05-15 12:50 ` (subset) [PATCH v2 0/5] Fix onboard USB hub instability on RK3399 Puma SoM Heiko Stuebner
2025-05-15 12:50 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=18791204.sWSEgdgrri@diego \
--to=heiko@sntech.de \
--cc=benjamin.bara@skidata.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=klaus.goger@theobroma-systems.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=lukasz.czechowski@thaumatec.com \
--cc=mka@chromium.org \
--cc=robh@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.