* rt721: enable capture switches by default
[not found] <alsa-project/alsa-ucm-conf/pr/806@alsa-project.org>
@ 2026-07-06 14:23 ` GitHub pull_request - opened
2026-07-06 14:29 ` GitHub pull_request - edited
1 sibling, 0 replies; 2+ messages in thread
From: GitHub pull_request - opened @ 2026-07-06 14:23 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #806 was opened from BenSharir:
Enable FU0F and FU1E capture switches in the RT721 init sequence.
Without these, DMIC and headset microphone capture is muted by default.
This matches the behavior of rt712 and rt713 codecs which both enable
their capture switches in init.conf.
**Hardware tested:**
- ASUS ProArt PX13 HN7306EAC
- AMD ACP70 SoundWire
- RT721 codec
- Card components: `cfg-amp:2 mic:acp-dmic cfg-mics:1 hs:rt721`
**System:**
- Fedora 44
- Kernel 7.0.13-200.fc44.x86_64
- alsa-ucm 1.2.16.1-1.fc44
**Before:** Microphone records silence; `amixer` shows:
- `rt721 FU0F Capture Switch`: off,off
- `rt721 FU1E Capture Switch`: off,off,off,off
**After:** Microphone works; switches enabled by default.
Fixes: #805
Signed-off-by: Ben Sharir <bensharir@gmail.com>
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/806
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/806.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 2+ messages in thread* rt721: enable capture switches by default
[not found] <alsa-project/alsa-ucm-conf/pr/806@alsa-project.org>
2026-07-06 14:23 ` rt721: enable capture switches by default GitHub pull_request - opened
@ 2026-07-06 14:29 ` GitHub pull_request - edited
1 sibling, 0 replies; 2+ messages in thread
From: GitHub pull_request - edited @ 2026-07-06 14:29 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #806 was edited from BenSharir:
Enable FU0F and FU1E capture switches in the RT721 init sequence.
Without these, DMIC and headset microphone capture is muted by default.
This matches the behavior of rt712 and rt713 codecs which both enable
their capture switches in init.conf.
**Hardware tested:**
- ASUS ProArt PX13 HN7306EAC
- AMD ACP70 SoundWire
- RT721 codec
- Card components: `cfg-amp:2 mic:acp-dmic cfg-mics:1 hs:rt721`
**System:**
- Fedora 44
- Kernel 7.0.13-200.fc44.x86_64
- alsa-ucm 1.2.16.1-1.fc44
**Before:** Microphone records silence; `amixer` shows:
- `rt721 FU0F Capture Switch`: off,off
- `rt721 FU1E Capture Switch`: off,off,off,off
**After:** Microphone works; switches enabled by default.
Fixes: #805
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/806
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/806.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-07-06 14:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <alsa-project/alsa-ucm-conf/pr/806@alsa-project.org>
2026-07-06 14:23 ` rt721: enable capture switches by default GitHub pull_request - opened
2026-07-06 14:29 ` GitHub pull_request - edited
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.