* Re: Excessive power consumption on Sony VAIO VPCZ23A4R
2013-01-06 14:18 ` Rafael J. Wysocki
@ 2013-01-06 14:26 ` Alexander E. Patrakov
2013-01-07 11:04 ` Alexander E. Patrakov
1 sibling, 0 replies; 4+ messages in thread
From: Alexander E. Patrakov @ 2013-01-06 14:26 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-acpi
[-- Attachment #1: Type: text/plain, Size: 1217 bytes --]
2013/1/6 Rafael J. Wysocki <rjw@sisk.pl>:
> On Sunday, January 06, 2013 06:07:53 PM Alexander E. Patrakov wrote:
>> Hello.
>>
>> I have a Sony VAIO VPCZ23A4R laptop. In Windows 7, it has a battery
>> life of 7 hours (but now I have only Gentoo Linux on my SSD). In
>> Gentoo Linux (with kernel 3.7.1), the battery lasts only 4-5 hours. I
>> guessed that the problem can be related to ASPM,
>
> Most likely that's not the case. I suppose that the graphics power management
> is more aggressive on Windows and that depends on the graphics driver.
>
>> and booted the laptop
>> with the "pcie_aspm=force" kernel parameter. Result:
>>
>> [ 0.709517] \_SB_.PCI0:_OSC invalid UUID
>> [ 0.709518] _OSC request data:1 1f 1f
>> [ 0.709523] pci0000:00: ACPI _OSC support notification failed,
>> disabling PCIe ASPM
>> [ 0.709524] pci0000:00: Unable to request _OSC control (_OSC
>> support mask: 0x08)
>>
>> acpidump output is available at
>> https://bugs.freedesktop.org/attachment.cgi?id=65558
>>
>> What else do I need to send you in order to debug and eliminate the problem?
>
> Can you please post the output of dmesg without the pcie_aspm=force argument?
See the attached file.
--
Alexander E. Patrakov
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 61789 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.1-gentoo (root@home) (gcc version 4.6.3 (Gentoo 4.6.3 p1.8, pie-0.5.2) ) #1 SMP PREEMPT Sun Dec 30 19:22:15 YEKT 2012
[ 0.000000] Command line: root=/dev/vaio/gentoo64a-root rd.luks.uuid=luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 quiet initrd=/boot/initramfs-3.7.1-gentoo.img BOOT_IMAGE=/boot/vmlinuz-3.7.1-gentoo
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ae3efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ae3f000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 240000000 mask FF0000000 write-back
[ 0.000000] 8 base 250000000 mask FF0000000 write-back
[ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9affffff]
[ 0.000000] [mem 0x00000000-0x9affffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x9affffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x25fdfffff]
[ 0.000000] [mem 0x100000000-0x25fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x25fdfffff @ [mem 0x9ae38000-0x9ae3efff]
[ 0.000000] RAMDISK: [mem 0x7f3ac000-0x7fffefff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 Sony)
[ 0.000000] ACPI: XSDT 000000009affe120 00094 (v01 Sony VAIO 20120521 01000013)
[ 0.000000] ACPI: FACP 000000009affc000 000F4 (v04 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: DSDT 000000009aff0000 08607 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009af6e000 00040
[ 0.000000] ACPI: ASF! 000000009affd000 000A5 (v32 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: HPET 000000009affb000 00038 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: APIC 000000009affa000 0008C (v02 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: MCFG 000000009aff9000 0003C (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SLIC 000000009afef000 00176 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: WDAT 000000009afee000 00224 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afed000 00CA6 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009afeb000 00028 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afe9000 0022B (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009afe6000 00034 (v07 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afe5000 00846 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afe4000 00996 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afe3000 00EE8 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff]
[ 0.000000] NODE_DATA [mem 0x25fdfb000-0x25fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x25fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0008efff]
[ 0.000000] node 0: [mem 0x00100000-0x9ae3efff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x25fdfffff]
[ 0.000000] On node 0 totalpages: 2075583
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3897 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 614016 pages, LIFO batch:31
[ 0.000000] Normal zone: 22520 pages used for memmap
[ 0.000000] Normal zone: 1418760 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 0000000000090000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009ae3f000 - 000000009aebf000
[ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025fa00000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036673
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/vaio/gentoo64a-root rd.luks.uuid=luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 quiet initrd=/boot/initramfs-3.7.1-gentoo.img BOOT_IMAGE=/boot/vmlinuz-3.7.1-gentoo
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8067872k/9959424k available (6462k kernel code, 1657092k absent, 234460k reserved, 6550k data, 768k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2793.747 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.49 BogoMIPS (lpj=2793747)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000069] Security Framework initialized
[ 0.000619] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002134] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002752] Mount-cache hash table entries: 256
[ 0.003516] Initializing cgroup subsys cpuacct
[ 0.003518] Initializing cgroup subsys memory
[ 0.003556] Initializing cgroup subsys devices
[ 0.003558] Initializing cgroup subsys freezer
[ 0.003559] Initializing cgroup subsys blkio
[ 0.003561] Initializing cgroup subsys net_prio
[ 0.003566] Initializing cgroup subsys hugetlb
[ 0.003615] CPU: Physical Processor ID: 0
[ 0.003616] CPU: Processor Core ID: 0
[ 0.003620] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003623] mce: CPU supports 7 MCE banks
[ 0.003632] CPU0: Thermal monitoring enabled (TM1)
[ 0.003643] process: using mwait in idle threads
[ 0.003646] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.003805] Freeing SMP alternatives: 24k freed
[ 0.004996] ACPI: Core revision 20120913
[ 0.027245] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.037235] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07)
[ 0.138701] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.138708] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.138715] ... version: 3
[ 0.138716] ... bit width: 48
[ 0.138717] ... generic registers: 4
[ 0.138718] ... value mask: 0000ffffffffffff
[ 0.138719] ... max period: 000000007fffffff
[ 0.138720] ... fixed-purpose events: 3
[ 0.138721] ... event mask: 000000070000000f
[ 0.146898] SMP alternatives: lockdep: fixing up alternatives
[ 0.160423] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.146916] smpboot: Booting Node 0, Processors #1
[ 0.161810] SMP alternatives: lockdep: fixing up alternatives
[ 0.161813] #2
[ 0.176782] SMP alternatives: lockdep: fixing up alternatives
[ 0.176786] #3
[ 0.189923] Brought up 4 CPUs
[ 0.189927] smpboot: Total of 4 processors activated (22349.97 BogoMIPS)
[ 0.193870] devtmpfs: initialized
[ 0.196035] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.196348] NET: Registered protocol family 16
[ 0.196754] ACPI: bus type pci registered
[ 0.196830] dca service started, version 1.12.1
[ 0.196885] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.196888] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.229108] PCI: Using configuration type 1 for base access
[ 0.230901] bio: create slab <bio-0> at 0
[ 0.231005] ACPI: Added _OSI(Module Device)
[ 0.231008] ACPI: Added _OSI(Processor Device)
[ 0.231010] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.231012] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.235665] ACPI: EC: Look up EC in DSDT
[ 0.240261] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.249703] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.256908] ACPI: SSDT 000000009ae70718 0067C (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.258140] ACPI: Dynamic OEM Table Load:
[ 0.258143] ACPI: SSDT (null) 0067C (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.265130] ACPI: SSDT 000000009ae71a98 00303 (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.266417] ACPI: Dynamic OEM Table Load:
[ 0.266419] ACPI: SSDT (null) 00303 (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.269688] ACPI: SSDT 000000009ae6fd98 00119 (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.270935] ACPI: Dynamic OEM Table Load:
[ 0.270937] ACPI: SSDT (null) 00119 (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.680226] ACPI: Interpreter enabled
[ 0.680230] ACPI: (supports S0 S3 S4 S5)
[ 0.680268] ACPI: Using IOAPIC for interrupt routing
[ 0.693696] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.694960] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.694963] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.695389] \_SB_.PCI0:_OSC invalid UUID
[ 0.695391] _OSC request data:1 8 1f
[ 0.695414] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.696177] PCI host bridge to bus 0000:00
[ 0.696180] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.696182] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.696184] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.696185] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.696187] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.696224] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.696301] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.696316] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.696325] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.696331] pci 0000:00:02.0: reg 20: [io 0xa000-0xa03f]
[ 0.696424] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.696462] pci 0000:00:16.0: reg 10: [mem 0xd9404000-0xd940400f 64bit]
[ 0.696590] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.696681] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.696983] pci 0000:00:1a.0: reg 10: [mem 0xd9409000-0xd94093ff]
[ 0.698689] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.698734] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.698763] pci 0000:00:1b.0: reg 10: [mem 0xd9400000-0xd9403fff 64bit]
[ 0.698904] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.698944] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.699089] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.699132] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.699276] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.699318] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.699463] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.699505] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.699648] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.699695] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.699845] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.699895] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.700184] pci 0000:00:1d.0: reg 10: [mem 0xd9408000-0xd94083ff]
[ 0.701875] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.701917] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 0.702115] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.702151] pci 0000:00:1f.2: reg 10: [io 0xa088-0xa08f]
[ 0.702166] pci 0000:00:1f.2: reg 14: [io 0xa094-0xa097]
[ 0.702181] pci 0000:00:1f.2: reg 18: [io 0xa080-0xa087]
[ 0.702196] pci 0000:00:1f.2: reg 1c: [io 0xa090-0xa093]
[ 0.702211] pci 0000:00:1f.2: reg 20: [io 0xa060-0xa07f]
[ 0.702225] pci 0000:00:1f.2: reg 24: [mem 0xd9407000-0xd94077ff]
[ 0.702322] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.702356] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.702384] pci 0000:00:1f.3: reg 10: [mem 0xd9405000-0xd94050ff 64bit]
[ 0.702425] pci 0000:00:1f.3: reg 20: [io 0xa040-0xa05f]
[ 0.702720] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000
[ 0.703076] pci 0000:02:00.0: reg 10: [mem 0xd8400000-0xd8401fff 64bit]
[ 0.704611] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.706959] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.706965] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.706971] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff]
[ 0.706980] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.707090] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.707118] pci 0000:03:00.0: reg 10: [mem 0xd7400000-0xd7400fff]
[ 0.707325] pci 0000:03:00.0: supports D1 D2
[ 0.707326] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.708828] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.708841] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
[ 0.708854] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff]
[ 0.708873] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.709044] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.709081] pci 0000:04:00.0: reg 10: [mem 0xd6400000-0xd6401fff 64bit]
[ 0.709291] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.710880] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.710886] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.710892] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff]
[ 0.710901] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.711066] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.711140] pci 0000:05:00.0: reg 10: [io 0x6000-0x60ff]
[ 0.711274] pci 0000:05:00.0: reg 18: [mem 0xd3404000-0xd3404fff 64bit pref]
[ 0.711356] pci 0000:05:00.0: reg 20: [mem 0xd3400000-0xd3403fff 64bit pref]
[ 0.711724] pci 0000:05:00.0: supports D1 D2
[ 0.711725] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.713863] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.713881] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.713886] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff]
[ 0.713896] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref]
[ 0.713979] pci 0000:00:1c.6: PCI bridge to [bus 08-20]
[ 0.713985] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff]
[ 0.713991] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff]
[ 0.714000] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref]
[ 0.714045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.714203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.714253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.714299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.714345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.714393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[ 0.714513] \_SB_.PCI0:_OSC invalid UUID
[ 0.714515] _OSC request data:1 1f 1f
[ 0.714519] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.714521] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.719335] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.719404] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.719469] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.719533] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.719600] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.719665] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.719730] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.719801] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.720131] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.720138] vgaarb: loaded
[ 0.720139] vgaarb: bridge control possible 0000:00:02.0
[ 0.720208] SCSI subsystem initialized
[ 0.720210] ACPI: bus type scsi registered
[ 0.720271] libata version 3.00 loaded.
[ 0.720285] ACPI: bus type usb registered
[ 0.720311] usbcore: registered new interface driver usbfs
[ 0.720324] usbcore: registered new interface driver hub
[ 0.720354] usbcore: registered new device driver usb
[ 0.720403] PCI: Using ACPI for IRQ routing
[ 0.728464] PCI: pci_cache_line_size set to 64 bytes
[ 0.728656] e820: reserve RAM buffer [mem 0x0008f400-0x0008ffff]
[ 0.728658] e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff]
[ 0.728660] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.728661] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
[ 0.729000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.729007] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.731028] Switching to clocksource hpet
[ 0.737791] pnp: PnP ACPI init
[ 0.737822] ACPI: bus type pnp registered
[ 0.738141] pnp 00:00: [bus 00-fe]
[ 0.738144] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.738146] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.738147] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.738149] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.738151] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.738153] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.738154] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.738156] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.738158] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.738159] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.738161] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.738162] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.738164] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.738166] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.738167] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.738169] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.738170] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.738172] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[ 0.738254] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.738338] pnp 00:01: [io 0x0000-0x001f]
[ 0.738340] pnp 00:01: [io 0x0081-0x0091]
[ 0.738341] pnp 00:01: [io 0x0093-0x009f]
[ 0.738343] pnp 00:01: [io 0x00c0-0x00df]
[ 0.738345] pnp 00:01: [dma 4]
[ 0.738374] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.738383] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.738411] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.738483] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.738511] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.738524] pnp 00:04: [io 0x00f0]
[ 0.738535] pnp 00:04: [irq 13]
[ 0.738563] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.738574] pnp 00:05: [io 0x002e-0x002f]
[ 0.738577] pnp 00:05: [io 0x004e-0x004f]
[ 0.738579] pnp 00:05: [io 0x0061]
[ 0.738580] pnp 00:05: [io 0x0063]
[ 0.738582] pnp 00:05: [io 0x0065]
[ 0.738583] pnp 00:05: [io 0x0067]
[ 0.738584] pnp 00:05: [io 0x0070]
[ 0.738586] pnp 00:05: [io 0x0080]
[ 0.738587] pnp 00:05: [io 0x0092]
[ 0.738589] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.738590] pnp 00:05: [io 0x0680-0x069f]
[ 0.738592] pnp 00:05: [io 0x1000-0x100f]
[ 0.738593] pnp 00:05: [io 0xffff]
[ 0.738595] pnp 00:05: [io 0xffff]
[ 0.738596] pnp 00:05: [io 0x0400-0x0453]
[ 0.738597] pnp 00:05: [io 0x0458-0x047f]
[ 0.738599] pnp 00:05: [io 0x0500-0x057f]
[ 0.738600] pnp 00:05: [io 0x164e-0x164f]
[ 0.738602] pnp 00:05: [io 0x2000]
[ 0.738603] pnp 00:05: [io 0x2004]
[ 0.738662] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.738664] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.738666] system 00:05: [io 0xffff] has been reserved
[ 0.738668] system 00:05: [io 0xffff] has been reserved
[ 0.738670] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.738672] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.738674] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.738676] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.738678] system 00:05: [io 0x2000] has been reserved
[ 0.738679] system 00:05: [io 0x2004] has been reserved
[ 0.738685] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.738694] pnp 00:06: [io 0x0070-0x0077]
[ 0.738701] pnp 00:06: [irq 8]
[ 0.738729] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.738754] pnp 00:07: [io 0x0454-0x0457]
[ 0.738794] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.738798] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.738816] pnp 00:08: [io 0x0060]
[ 0.738817] pnp 00:08: [io 0x0064]
[ 0.738824] pnp 00:08: [irq 1]
[ 0.738851] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.738872] pnp 00:09: [irq 12]
[ 0.738901] pnp 00:09: Plug and Play ACPI device, IDs SNY9015 PNP0f13 (active)
[ 0.739013] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.739015] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.739016] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.739018] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.739020] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.739021] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.739023] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.739024] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.739026] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.739027] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[ 0.739086] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.739088] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.739090] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.739092] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.739094] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.739096] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.739098] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.739100] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.739103] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.739105] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.739109] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.739803] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 0.739805] pnp 00:0b: [mem 0x40000000-0x401fffff]
[ 0.739866] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.739868] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.739872] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.739893] pnp: PnP ACPI: found 12 devices
[ 0.739894] ACPI: ACPI bus type pnp unregistered
[ 0.747922] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.747927] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.747935] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff]
[ 0.747940] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.747950] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.747953] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
[ 0.747961] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff]
[ 0.747966] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.747976] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.747979] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.747986] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff]
[ 0.747991] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.748001] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.748004] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.748011] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff]
[ 0.748017] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref]
[ 0.748026] pci 0000:00:1c.6: PCI bridge to [bus 08-20]
[ 0.748030] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff]
[ 0.748048] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff]
[ 0.748054] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref]
[ 0.748115] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.748117] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.748119] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.748121] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.748123] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.748124] pci_bus 0000:02: resource 1 [mem 0xd8400000-0xd93fffff]
[ 0.748126] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.748128] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.748129] pci_bus 0000:03: resource 1 [mem 0xd7400000-0xd83fffff]
[ 0.748131] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.748133] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.748134] pci_bus 0000:04: resource 1 [mem 0xd6400000-0xd73fffff]
[ 0.748136] pci_bus 0000:04: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.748138] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
[ 0.748139] pci_bus 0000:05: resource 1 [mem 0xd5400000-0xd63fffff]
[ 0.748141] pci_bus 0000:05: resource 2 [mem 0xd3400000-0xd43fffff 64bit pref]
[ 0.748142] pci_bus 0000:08: resource 0 [io 0x3000-0x5fff]
[ 0.748144] pci_bus 0000:08: resource 1 [mem 0xb0000000-0xcfffffff]
[ 0.748146] pci_bus 0000:08: resource 2 [mem 0xd4400000-0xd53fffff 64bit pref]
[ 0.748189] NET: Registered protocol family 2
[ 0.748981] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.750304] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[ 0.753743] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.753797] TCP: reno registered
[ 0.753847] UDP hash table entries: 4096 (order: 7, 655360 bytes)
[ 0.754344] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes)
[ 0.754899] NET: Registered protocol family 1
[ 0.754916] pci 0000:00:02.0: Boot video device
[ 0.789671] PCI: CLS 64 bytes, default 64
[ 0.789823] Unpacking initramfs...
[ 1.002623] Freeing initrd memory: 12620k freed
[ 1.004236] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.004241] software IO TLB [mem 0x96e38000-0x9ae37fff] (64MB) mapped at [ffff880096e38000-ffff88009ae37fff]
[ 1.004275] Simple Boot Flag at 0x44 set to 0x1
[ 1.004909] audit: initializing netlink socket (disabled)
[ 1.004942] type=2000 audit(1357482073.890:1): initialized
[ 1.020599] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.023155] VFS: Disk quotas dquot_6.5.2
[ 1.023209] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.023799] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.024108] NILFS version 2 loaded
[ 1.024391] Btrfs loaded
[ 1.024397] msgmni has been set to 15782
[ 1.025016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.025031] io scheduler noop registered
[ 1.025032] io scheduler deadline registered
[ 1.025096] io scheduler cfq registered (default)
[ 1.025647] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.025739] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.026064] intel_idle: MWAIT substates: 0x21120
[ 1.026066] intel_idle: v0.4 model 0x2A
[ 1.026067] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.026225] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.026365] ACPI: AC Adapter [ADP1] (on-line)
[ 1.026603] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.026656] ACPI: Lid Switch [LID0]
[ 1.026707] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.026738] ACPI: Power Button [PWRB]
[ 1.026840] ACPI: Requesting acpi_cpufreq
[ 1.036192] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.036195] ACPI: Thermal Zone [TZ01] (51 C)
[ 1.038641] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 1.038687] XENFS: not registering filesystem on non-xen platform
[ 1.038765] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.043259] loop: module loaded
[ 1.043367] Loading iSCSI transport class v2.0-870.
[ 1.043497] iscsi: registered transport (tcp)
[ 1.043561] ahci 0000:00:1f.2: version 3.0
[ 1.043703] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.043788] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
[ 1.043791] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part apst
[ 1.043797] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.044660] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.044672] ACPI: Battery Slot [BAT1] (battery present)
[ 1.044803] scsi0 : ahci
[ 1.044810] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.044819] ACPI: Battery Slot [BAT2] (battery absent)
[ 1.045048] scsi1 : ahci
[ 1.045138] scsi2 : ahci
[ 1.045223] scsi3 : ahci
[ 1.045310] scsi4 : ahci
[ 1.045393] scsi5 : ahci
[ 1.045454] ata1: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407100 irq 40
[ 1.045457] ata2: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407180 irq 40
[ 1.045458] ata3: DUMMY
[ 1.045459] ata4: DUMMY
[ 1.045460] ata5: DUMMY
[ 1.045461] ata6: DUMMY
[ 1.045893] scsi6 : pata_legacy
[ 1.045950] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 1.350186] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.350248] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.351493] ata2.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133
[ 1.351496] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.351585] ata2.00: failed to get Identify Device Data, Emask 0x1
[ 1.351598] ata1.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133
[ 1.351600] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.351681] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.352609] ata2.00: failed to get Identify Device Data, Emask 0x1
[ 1.352611] ata2.00: configured for UDMA/133
[ 1.352698] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.352714] ata1.00: configured for UDMA/133
[ 1.354618] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5
[ 1.355081] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.355181] sd 0:0:0:0: [sda] Write Protect is off
[ 1.355185] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.355224] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.355666] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5
[ 1.355528] ACPI: Invalid Power Resource to register!
[ 1.355866] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.356014] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.356018] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.356061] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.356241] sda: sda1 sda2
[ 1.356222] ACPI: Invalid Power Resource to register!
[ 1.356436] sda: p2 size 489641984 extends beyond EOD,
[ 1.356438] enabling native capacity
[ 1.356767] sdb: unknown partition table
[ 1.357173] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.358565] sda: sda1 sda2
[ 1.358629] sda: p2 size 489641984 extends beyond EOD, truncated
[ 1.358911] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.359918] scsi7 : pata_legacy
[ 1.359975] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 1.510429] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.512592] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.512799] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.513009] mousedev: PS/2 mouse device common for all mice
[ 1.513468] rtc_cmos 00:06: RTC can wake from S4
[ 1.513715] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.513751] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.513915] cpuidle: using governor ladder
[ 1.514312] cpuidle: using governor menu
[ 1.514320] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.514501] TCP: cubic registered
[ 1.514504] Initializing XFRM netlink socket
[ 1.514688] NET: Registered protocol family 10
[ 1.515069] NET: Registered protocol family 17
[ 1.515152] Key type dns_resolver registered
[ 1.515578] PM: Hibernation image not present or could not be loaded.
[ 1.515597] registered taskstats version 1
[ 1.516448] rtc_cmos 00:06: setting system clock to 2013-01-06 14:21:15 UTC (1357482075)
[ 1.519164] Freeing unused kernel memory: 768k freed
[ 1.519236] Write protecting the kernel read-only data: 12288k
[ 1.522832] Freeing unused kernel memory: 1720k freed
[ 1.525807] Freeing unused kernel memory: 1396k freed
[ 1.528944] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.554334] dracut: dracut- dracut-024-
[ 1.588159] device-mapper: uevent: version 1.0.3
[ 1.588355] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 1.594350] systemd-udevd[162]: starting version 196
[ 1.599646] dracut: rd.md=0: removing MD RAID activation
[ 1.665977] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.666159] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.666165] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.666396] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.667265] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 1.667839] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.667853] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.668082] xhci_hcd 0000:04:00.0: irq 18, io mem 0xd6400000
[ 1.668175] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
[ 1.668184] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
[ 1.668194] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1.668204] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.668213] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 1.668655] rts_pstor: Initializing Realtek PCIE storage driver...
[ 1.668885] xHCI xhci_add_endpoint called for root hub
[ 1.668887] xHCI xhci_check_bandwidth called for root hub
[ 1.668990] hub 2-0:1.0: USB hub found
[ 1.669040] hub 2-0:1.0: 2 ports detected
[ 1.669327] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.669332] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 1.670397] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.670410] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.670430] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xd9409000
[ 1.671520] xHCI xhci_add_endpoint called for root hub
[ 1.671522] xHCI xhci_check_bandwidth called for root hub
[ 1.671575] hub 3-0:1.0: USB hub found
[ 1.671584] hub 3-0:1.0: 2 ports detected
[ 1.671768] rts_pstor 0000:03:00.0: Resource length: 0x1000
[ 1.671794] rts_pstor 0000:03:00.0: Original address: 0xd7400000, remapped address: 0xffffc90000c50000
[ 1.671800] rts_pstor 0000:03:00.0: pci->irq = 17
[ 1.671803] rts_pstor 0000:03:00.0: rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 17
[ 1.675688] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.675975] hub 1-0:1.0: USB hub found
[ 1.676004] hub 1-0:1.0: 2 ports detected
[ 1.676699] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.676704] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.676714] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.680631] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.680642] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.680703] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd9408000
[ 1.686681] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.687215] hub 4-0:1.0: USB hub found
[ 1.687234] hub 4-0:1.0: 2 ports detected
[ 1.705464] md: bind<sda>
[ 1.872814] scsi8 : SCSI emulation for PCI-Express Mass Storage devices
[ 1.873180] rts_pstor 0000:03:00.0: rts_pstor: waiting for device to settle before scanning
[ 1.912997] md: bind<sdb>
[ 1.922620] md: bind<sdb>
[ 1.923026] md: bind<sda>
[ 1.926037] md: raid0 personality registered for level 0
[ 1.926711] md/raid0:md126: md_size is 500129792 sectors.
[ 1.926715] md: RAID0 configuration for md126 - 1 zone
[ 1.926717] md: zone0=[sda/sdb]
[ 1.926725] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB
[ 1.926838] md126: detected capacity change from 0 to 256066453504
[ 1.929098] md126: p1 p2
[ 1.977283] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.004524] tsc: Refined TSC clocksource calibration: 2793.653 MHz
[ 2.004550] Switching to clocksource tsc
[ 2.092497] hub 1-1:1.0: USB hub found
[ 2.092756] hub 1-1:1.0: 6 ports detected
[ 2.197005] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 2.282052] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x122c00, board id: 1690, fw id: 934878
[ 2.304206] dracut: luksOpen /dev/md126p2 luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521
[ 2.311638] hub 4-1:1.0: USB hub found
[ 2.311814] hub 4-1:1.0: 8 ports detected
[ 2.316326] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[ 2.388014] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 2.548776] usb 1-1.2: new full-speed USB device number 4 using ehci_hcd
[ 2.703573] usb 1-1.3: new high-speed USB device number 5 using ehci_hcd
[ 2.871253] rts_pstor 0000:03:00.0: rts_pstor: device scan complete
[ 2.872034] scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 2.874647] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 17.798758] bio: create slab <bio-1> at 1
[ 18.098263] bio: create slab <bio-1> at 1
[ 18.170373] dracut: Scanning devices dm-0 for LVM volume groups
[ 18.187876] dracut: Reading all physical volumes. This may take a while...
[ 18.205117] dracut: Found volume group "vaio" using metadata type lvm2
[ 18.263114] dracut: 3 logical volume(s) in volume group "vaio" now active
[ 18.339235] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.371999] dracut: Checking ext4: /dev/vaio/gentoo64a-root
[ 18.372089] dracut: issuing e2fsck -a /dev/vaio/gentoo64a-root
[ 18.383525] dracut: /dev/vaio/gentoo64a-root: clean, 316745/1048576 files, 2157774/4194304 blocks
[ 18.386272] dracut: Mounting /dev/vaio/gentoo64a-root with -o noatime,ro
[ 18.393686] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.411971] dracut: Mounted root filesystem /dev/mapper/vaio-gentoo64a--root
[ 18.442235] dracut: Switching root
[ 19.125880] systemd-udevd[581]: starting version 196
[ 19.324198] sony_laptop: Sony Notebook Control Driver v0.6
[ 19.324680] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input4
[ 19.329103] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input5
[ 19.353248] Linux agpgart interface v0.103
[ 19.363436] [drm] Initialized drm 1.1.0 20060810
[ 19.376324] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[ 19.378709] cfg80211: Calling CRDA to update world regulatory domain
[ 19.382053] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 19.382504] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[ 19.386532] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c72000, 54:42:49:9a:df:1e, XID 0c900800 IRQ 46
[ 19.386538] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 19.388559] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 19.388565] Copyright(c) 2003-2012 Intel Corporation
[ 19.390356] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 19.390362] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90000c6c000
[ 19.390367] iwlwifi 0000:02:00.0: HW Revision ID = 0x34
[ 19.391183] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[ 19.391844] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
[ 19.391858] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.391865] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 19.391873] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.391877] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 19.391884] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.391888] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 19.391895] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.391898] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 19.401434] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 19.407868] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 19.435417] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 19.435423] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[ 19.435557] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 19.435562] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 19.435566] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 19.435570] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 19.435574] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[ 19.435580] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 19.436006] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 19.441120] hda_codec: ALC275: SKU not ready 0x411111f0
[ 19.443703] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 19.453664] iwlwifi 0000:02:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 19.453669] iwlwifi 0000:02:00.0: Device SKU: 0x1F0
[ 19.453672] iwlwifi 0000:02:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 19.458603] Registered led device: phy0-led
[ 19.484207] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 19.486446] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 19.493352] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 19.497392] media: Linux media interface: v0.10
[ 19.515099] pci 0000:00:00.0: Intel Sandybridge Chipset
[ 19.515418] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 19.518151] pci 0000:00:00.0: detected 65536K stolen memory
[ 19.518368] i915 0000:00:02.0: setting latency timer to 64
[ 19.519863] Linux video capture interface: v2.00
[ 19.522064] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 19.529310] Error: Driver 'pcspkr' is already registered, aborting...
[ 19.539245] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05c8:0318)
[ 19.542727] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10
[ 19.545111] usbcore: registered new interface driver uvcvideo
[ 19.545116] USB Video Class driver (1.1.1)
[ 19.548989] Bluetooth: Core ver 2.16
[ 19.549130] NET: Registered protocol family 31
[ 19.549133] Bluetooth: HCI device and connection manager initialized
[ 19.549212] Bluetooth: HCI socket layer initialized
[ 19.549220] Bluetooth: L2CAP socket layer initialized
[ 19.549245] Bluetooth: SCO socket layer initialized
[ 19.552390] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[ 19.555432] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[ 19.555509] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[ 19.555975] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[ 19.555994] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[ 19.557117] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
[ 19.558443] usbcore: registered new interface driver btusb
[ 19.558640] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[ 19.559109] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
[ 19.559153] perf_event_intel: PEBS enabled due to microcode update
[ 19.559302] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 19.636550] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 19.636582] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 19.636584] [drm] Driver supports precise vblank timestamp query.
[ 19.637192] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.659242] iTCO_vendor_support: vendor-support=0
[ 19.660702] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 19.660757] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 19.691148] cfg80211: World regulatory domain updated:
[ 19.691152] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.691154] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.691155] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.691157] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.691158] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.691160] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.718328] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 19.783054] fbcon: inteldrmfb (fb0) is primary device
[ 21.565128] Console: switching to colour frame buffer device 240x67
[ 21.579088] fb0: inteldrmfb frame buffer device
[ 21.579093] drm: registered panic notifier
[ 21.580677] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 21.580717] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 21.580754] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 21.580791] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 21.580828] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 21.580864] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 21.580900] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 21.585654] acpi device:3e: registered as cooling_device4
[ 21.586296] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.586589] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input11
[ 21.587370] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.587416] ACPI Warning: 0x000000000000a040-0x000000000000a05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
[ 21.587422] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.816892] EXT4-fs (md126p1): mounted filesystem with ordered data mode. Opts: (null)
[ 21.823292] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 21.858087] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 21.998526] microcode: Microcode Update Driver: v2.00 removed.
[ 23.287898] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 23.325872] EXT4-fs (md126p1): re-mounted. Opts: (null)
[ 23.347336] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 23.363925] EXT4-fs (dm-3): re-mounted. Opts: (null)
[ 25.521824] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 25.528736] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 25.936938] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 25.943883] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 26.187495] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.469178] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.469191] Bluetooth: BNEP filters: protocol multicast
[ 27.469219] Bluetooth: BNEP socket layer initialized
[ 27.645710] Bluetooth: RFCOMM TTY layer initialized
[ 27.645757] Bluetooth: RFCOMM socket layer initialized
[ 27.645764] Bluetooth: RFCOMM ver 1.11
[ 28.538896] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 28.540213] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 28.540225] ata1.00: configured for UDMA/133
[ 28.543016] ata1: EH complete
[ 28.543979] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 28.574900] ata2.00: failed to get Identify Device Data, Emask 0x1
[ 28.575632] ata2.00: failed to get Identify Device Data, Emask 0x1
[ 28.575640] ata2.00: configured for UDMA/133
[ 28.575660] ata2: EH complete
[ 28.576179] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 28.808381] EXT4-fs (dm-1): re-mounted. Opts: stripe=64,data=ordered,commit=360
[ 28.926694] EXT4-fs (dm-2): re-mounted. Opts: stripe=64,data=ordered,commit=360
[ 28.964840] EXT4-fs (dm-3): re-mounted. Opts: stripe=64,data=ordered,commit=360
[ 29.060626] pci_pm_runtime_suspend(): azx_runtime_suspend+0x0/0x50 [snd_hda_intel] returns -11
[ 29.710532] wlan0: authenticate with bc:ae:c5:c4:c2:d8
[ 29.721306] wlan0: send auth to bc:ae:c5:c4:c2:d8 (try 1/3)
[ 29.723423] wlan0: authenticated
[ 29.725437] wlan0: associate with bc:ae:c5:c4:c2:d8 (try 1/3)
[ 29.728822] wlan0: RX AssocResp from bc:ae:c5:c4:c2:d8 (capab=0x411 status=0 aid=2)
[ 29.750499] wlan0: associated
[ 29.750695] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 30.415686] pci_pm_runtime_suspend(): azx_runtime_suspend+0x0/0x50 [snd_hda_intel] returns -11
[ 30.441719] pci_pm_runtime_suspend(): azx_runtime_suspend+0x0/0x50 [snd_hda_intel] returns -11
[ 37.049348] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 37.049749] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 37.049754] ata1.00: configured for UDMA/133
[ 37.050994] ata1: EH complete
[ 37.051231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.057428] ata2.00: failed to get Identify Device Data, Emask 0x1
[ 37.057841] ata2.00: failed to get Identify Device Data, Emask 0x1
[ 37.057846] ata2.00: configured for UDMA/133
[ 37.058981] ata2: EH complete
[ 37.060173] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.112080] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 37.117301] EXT4-fs (md126p1): re-mounted. Opts: commit=0
[ 37.120359] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 37.134690] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[ 43.276775] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 43.276804] Bluetooth: HIDP socket layer initialized
[ 43.283678] elecom 0005:056E:0061.0001: unknown main item tag 0x0
[ 43.284388] input: Laser BTmouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:36/input12
[ 43.287509] elecom 0005:056E:0061.0001: input,hidraw0: BLUETOOTH HID v0.1e Mouse [Laser BTmouse] on 88:53:2E:C0:50:98
[ 90.738547] elecom 0005:056E:0061.0002: unknown main item tag 0x0
[ 90.739502] input: Laser BTmouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:37/input13
[ 90.741201] elecom 0005:056E:0061.0002: input,hidraw0: BLUETOOTH HID v0.1e Mouse [Laser BTmouse] on 88:53:2E:C0:50:98
[ 197.437980] elecom 0005:056E:0061.0003: unknown main item tag 0x0
[ 197.438430] input: Laser BTmouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:36/input14
[ 197.439927] elecom 0005:056E:0061.0003: input,hidraw0: BLUETOOTH HID v0.1e Mouse [Laser BTmouse] on 88:53:2E:C0:50:98
^ permalink raw reply [flat|nested] 4+ messages in thread