All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomasz Figa <tomasz.figa@gmail.com>
To: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Cc: linux-kernel@vger.kernel.org,
	Rob Herring <rob.herring@calxeda.com>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Rob Landley <rob@landley.net>, Kukjin Kim <kgene.kim@samsung.com>,
	Russell King <linux@arm.linux.org.uk>,
	Ben Dooks <ben-linux@fluff.org>,
	Mike Turquette <mturquette@linaro.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Heiko Stuebner <heiko@sntech.de>,
	Naour Romain <romain.naour@openwide.fr>,
	devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org,
	Tarek Dakhran <t.dakhran@samsung.com>,
	Dave.Martin@arm.com, nicolas.pitre@linaro.org
Subject: Re: [PATCH v3 0/4] Exynos 5410 Dual cluster support
Date: Wed, 20 Nov 2013 00:23:08 +0100	[thread overview]
Message-ID: <1951315.Ol55YFu91h@flatron> (raw)
In-Reply-To: <1383811969-32712-1-git-send-email-v.tyrtov@samsung.com>

Hi,

On Thursday 07 of November 2013 12:12:45 Vyacheslav Tyrtov wrote:
> The series of patches represent support of Exynos 5410 SoC
> 
> The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture
> Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time
> 
> Patches add new platform description, support of clock controller,
> dual cluster support and device tree for Exynos 5410
> 
> Has been build on v3.12.
> Has been tested on Exynos 5410 reference board (exynos_defconfig).

I've applied the patches on top of today's linux-next and tried to boot
my ODROID-XU using exynos5410-smdk5410.dts and exynos_defconfig, but all
I can get is an imprecise external abort, when the kernel tries to jump
to init. Full boot log below. Any ideas?

Best regards,
Tomasz

8><------------

U-Boot 2012.07-g2bcb371 (Nov 19 2013 - 20:17:37) for Exynos5410

CPU: Exynos5410 Rev2.3 [Samsung SOC on SMP Platform Base on ARM CortexA15]
APLL = 900MHz, KPLL = 600MHz
MPLL = 532MHz, BPLL = 800MHz
DRAM:  2 GiB
WARNING: Caches not enabled

TrustZone Enabled BSP
BL1 version: 
PMIC VER : 0, CHIP REV : 6
VDD MIF : 1.00000V
VDD ARM : 1.00000V
VDD INT : 1.00000V
VDD G3D : 1.00000V
VDD KFC : 1.00000V

Checking Boot Mode ... SDMMC
MMC:   S5P_MSHC2: 0, S5P_MSHC0: 1
MMC Device 0: 14.8 GiB
MMC Device 1: [ERROR] response error : 00000006 cmd 8
[ERROR] response error : 00000006 cmd 55
[ERROR] response error : 00000006 cmd 2
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Press 'Enter' or 'Space' to stop autoboot:  0 
ODROID-XU # 
ODROID-XU # 
ODROID-XU # pri        
baudrate=115200
bootargs=console=ttySAC2,115200n8 earlyprintk ignore_loglevel mem=1G root=/dev/mmcblk0p1 rootwait
bootcmd=run netboot
bootdelay=1
bootfile=uImage.xu
bootscript=source 40008000
copy_uboot_emmc2sd=emmc open 0;movi r z f 0 40000000;emmc close 0;movi w f 1 40000000;emmc open 0;movi r z b 0 40000000;emmc close 0;movi w b 1 40000000;emmc open 0;movi r z u 0 40000000;emmc close 0;movi w u 1 40000000;emmc open 0;movi r z t 0 40000000;emmc close 0;movi w t 1 40000000;mmc write 1 0x40008000 0x4CF 0x20;
copy_uboot_sd2emmc=movi r f 0 40000000;emmc open 1;movi w z f 1 40000000;emmc close 1;movi r b 0 40000000;emmc open 1;movi w z b 1 40000000;emmc close 1;movi r u 0 40000000;emmc open 1;movi w z u 1 40000000;emmc close 1;movi r t 0 40000000;emmc open 1;movi w z t 1 40000000;emmc close 1;mmc write 1 0x40008000 0x4CF 0x20;
default_bootcmd=echo >>> Run Default Bootcmd <<<;movi read kernel 0 40008000;bootz 40008000
ethact=sms0
ipaddr=192.168.1.20
loadbootscript_1=echo >>> Load Boot Script from mmc 0:1 <<<;fatload mmc 0:1 40008000 boot.scr
loadbootscript_2=echo >>> Load Boot Script from mmc 0:2 <<<;fatload mmc 0:2 40008000 boot.scr
loadbootscript_3=echo >>> Load Boot Script from mmc 1:1 <<<;fatload mmc 1:1 40008000 boot.scr
loadbootscript_4=echo >>> Load Boot Script from mmc 1:2 <<<;fatload mmc 1:2 40008000 boot.scr
netboot=usb start && tftpboot 40008000 && bootm 40008000
rootfslen=100000
serverip=192.168.1.2
stderr=serial
stdin=serial
stdout=serial
usbethaddr=00:11:22:33:44:55

Environment size: 1546/16380 bytes
ODROID-XU # run netboot
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.20
Filename 'uImage.xu'.
Load address: 0x40008000
Loading: #################################################################
         #################################################################
         #################################################################
         #########
done
Bytes transferred = 2980232 (2d7988 hex)
## Booting kernel from Legacy Image at 40008000 ...
   Image Name:   Linux-exynos5410-odroidxu
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2980168 Bytes = 2.8 MiB
   Load Address: 50008000
   Entry Point:  50008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
  
Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.0-next-20131119-00004-g27f3f5f-dirty (tom3q@flatron) (gcc version 4.7.2 (Gentoo 4.7.2-r1 p1.6, pie-0.5.5) ) #11 SMP PREEMPT Wed Nov 20 00:08:02 CET 2013
[    0.000000] CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Hardkernel ODROID-XU board based on EXYNOS5410
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] CPU EXYNOS5410 (id 0xe5410023)
[    0.000000] On node 0 totalpages: 262144
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 528 pages used for memmap
[    0.000000]   HighMem zone: 67584 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 7 pages/cpu @c07e4000 s7552 r8192 d12928 u32768
[    0.000000] pcpu-alloc: s7552 r8192 d12928 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
[    0.000000] Kernel command line: console=ttySAC2,115200n8 earlyprintk ignore_loglevel mem=1G root=/dev/mmcblk0p1 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1033268K/1048576K available (3860K kernel code, 254K rwdata, 1300K rodata, 231K init, 288K bss, 15308K reserved, 270336K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0512398   (5161 kB)
[    0.000000]       .init : 0xc0513000 - 0xc054cd80   ( 232 kB)
[    0.000000]       .data : 0xc054e000 - 0xc058d9e0   ( 255 kB)
[    0.000000]        .bss : 0xc058d9ec - 0xc05d5aa8   ( 289 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 10737418240000000ns
[    0.000000] Console: colour dummy device 80x30
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.020000] Calibrating delay loop... 1785.85 BogoMIPS (lpj=4464640)
[    0.045000] pid_max: default: 32768 minimum: 301
[    0.050000] Mount-cache hash table entries: 512
[    0.055000] Initializing cgroup subsys memory
[    0.060000] Initializing cgroup subsys devices
[    0.065000] Initializing cgroup subsys freezer
[    0.070000] Initializing cgroup subsys blkio
[    0.075000] CPU: Testing write buffer coherency: ok
[    0.080000] CPU0: update cpu_power 1468
[    0.085000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.090000] Setting up static identity map for 0x503a9c48 - 0x503a9ca0
[    0.095000] ARM CCI driver probed
[    0.100000] EDCS power management initialized
[    0.135000] CPU1: Booted secondary processor
[    0.175000] CPU1: update cpu_power 1468
[    0.175000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.185000] CPU2: Booted secondary processor
[    0.225000] CPU2: update cpu_power 1468
[    0.225000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.235000] CPU3: Booted secondary processor
[    0.275000] CPU3: update cpu_power 1468
[    0.275000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    1.285000] CPU4: failed to come online
[    2.300000] CPU5: failed to come online
[    3.310000] CPU6: failed to come online
[    4.320000] CPU7: failed to come online
[    4.320000] Brought up 4 CPUs
[    4.325000] SMP: Total of 4 processors activated.
[    4.330000] CPU: All CPU(s) started in SVC mode.
[    4.335000] devtmpfs: initialized
[    4.345000] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    4.350000] pinctrl core: initialized pinctrl subsystem
[    4.355000] regulator-dummy: no parameters
[    4.355000] NET: Registered protocol family 16
[    4.360000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    4.370000] S3C Power Management, Copyright 2004 Simtec Electronics
[    4.375000] EXYNOS: PMU not supported
[    4.380000] EXYNOS: Initializing architecture
[    4.395000] bio: create slab <bio-0> at 0
[    4.405000] SCSI subsystem initialized
[    4.405000] usbcore: registered new interface driver usbfs
[    4.410000] usbcore: registered new interface driver hub
[    4.420000] usbcore: registered new device driver usb
[    4.425000] Switched to clocksource mct-frc
[    4.440000] NET: Registered protocol family 2
[    4.445000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    4.455000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    4.460000] TCP: Hash tables configured (established 8192 bind 8192)
[    4.465000] TCP: reno registered
[    4.470000] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    4.475000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    4.485000] NET: Registered protocol family 1
[    4.490000] audit: initializing netlink socket (disabled)
[    4.495000] type=2000 audit(4.495:1): initialized
[    4.500000] bounce pool size: 64 pages
[    4.520000] ROMFS MTD (C) 2007 Red Hat, Inc.
[    4.525000] msgmni has been set to 1490
[    4.530000] io scheduler noop registered
[    4.530000] io scheduler deadline registered (default)
[    4.535000] io scheduler cfq registered
[    4.655000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    4.665000] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10
[    4.675000] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10
[    4.680000] console [tt[SAC2] enabled
    4.680000] console [ttySAC2] enabled
[    4.690000] bootconsole [early[on0] disabled
    4.690000] bootconsole [earlycon0] disabled
[    4.700000] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10
[    4.715000] brd: module loaded
[    4.720000] loop: module loaded
[    4.725000] usbcore: registered new interface driver asix
[    4.730000] usbcore: registered new interface driver ax88179_178a
[    4.735000] usbcore: registered new interface driver cdc_ether
[    4.740000] usbcore: registered new interface driver r815x
[    4.745000] usbcore: registered new interface driver smsc75xx
[    4.755000] usbcore: registered new interface driver smsc95xx
[    4.760000] usbcore: registered new interface driver net1080
[    4.765000] usbcore: registered new interface driver cdc_subset
[    4.770000] usbcore: registered new interface driver zaurus
[    4.775000] usbcore: registered new interface driver cdc_ncm
[    4.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.790000] usbcore: registered new interface driver usb-storage
[    4.795000] mousedev: PS/2 mouse device common for all mice
[    4.800000] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    4.810000] sdhci: Secure Digital Host Controller Interface driver
[    4.815000] sdhci: Copyright(c) Pierre Ossman
[    4.820000] Synopsys Designware Multimedia Card Interface Driver
[    4.825000] dwmmc_exynos 12200000.mmc: dummy supplies not allowed
[    4.830000] dwmmc_exynos 12200000.mmc: no vmmc regulator found: -19
[    4.835000] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    4.845000] dwmmc_exynos 12200000.mmc: Version ID is 241a
[    4.850000] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107, 64 bit host data width, 128 deep fifo
[    4.860000] of_get_named_gpiod_flags: can't parse gpios property of node '/mmc@12200000/slot@0[0]'
[    4.895000] dwmmc_exynos 12200000.mmc: 1 slots initialized
[    4.895000] dwmmc_exynos 12220000.mmc: dummy supplies not allowed
[    4.905000] dwmmc_exynos 12220000.mmc: no vmmc regulator found: -19
[    4.910000] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    4.915000] dwmmc_exynos 12220000.mmc: Version ID is 241a
[    4.920000] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109, 64 bit host data width, 128 deep fifo
[    4.930000] of_get_named_gpiod_flags: can't parse gpios property of node '/mmc@12220000/slot@0[0]'
[    4.970000] dwmmc_exynos 12220000.mmc: 1 slots initialized
[    4.975000] usbcore: registered new interface driver usbhid
[    4.980000] usbhid: USB HID core driver
[    4.980000] TCP: cubic registered
[    4.985000] NET: Registered protocol family 17
[    4.990000] NET: Registered protocol family 15
[    4.995000] Registering SWP/SWPB emulation handler
[    5.000000] registered taskstats version 1
[    5.005000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    5.010000] Waiting for root device /dev/mmcblk0p1...
[    5.025000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz, actual 25000000HZ div = 1)
[    5.035000] mmc1: new SDHC card at address e624
[    5.040000] isa bounce pool size: 16 pages
[    5.045000] mmcblk0: mmc1:e624 SU16G 14.8 GiB 
[    5.050000]  mmcblk0: p1
[    5.120000] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[    5.125000] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[    5.145000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    5.150000] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    5.165000] devtmpfs: mounted
[    5.170000] Freeing unused kernel memory: 228K (c0513000 - c054c000)
[    5.195000] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[    5.210000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
[    5.210000] 
[    5.210000] CPU: 2 PID: 1 Comm: init Not tainted 3.12.0-next-20131119-00004-g27f3f5f-dirty #11
[    5.210000] [<c0014068>] (unwind_backtrace+0x0/0xf8) from [<c0011438>] (show_stack+0x10/0x14)
[    5.210000] [<c0011438>] (show_stack+0x10/0x14) from [<c03a486c>] (dump_stack+0x7c/0xbc)
[    5.210000] [<c03a486c>] (dump_stack+0x7c/0xbc) from [<c03a1e78>] (panic+0x8c/0x1e4)
[    5.210000] [<c03a1e78>] (panic+0x8c/0x1e4) from [<c001f504>] (do_exit+0x850/0x920)
[    5.210000] [<c001f504>] (do_exit+0x850/0x920) from [<c001f63c>] (do_group_exit+0x3c/0xb0)
[    5.210000] [<c001f63c>] (do_group_exit+0x3c/0xb0) from [<c0029e1c>] (get_signal_to_deliver+0x1d4/0x538)
[    5.210000] [<c0029e1c>] (get_signal_to_deliver+0x1d4/0x538) from [<c0010974>] (do_signal+0x100/0x40c)
[    5.210000] [<c0010974>] (do_signal+0x100/0x40c) from [<c0010fb4>] (do_work_pending+0x68/0xa8)
[    5.210000] [<c0010fb4>] (do_work_pending+0x68/0xa8) from [<c000e620>] (work_pending+0xc/0x20)
[    5.300000] CPU3: stopping
[    5.300000] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.12.0-next-20131119-00004-g27f3f5f-dirty #11
[    5.300000] [<c0014068>] (unwind_backtrace+0x0/0xf8) from [<c0011438>] (show_stack+0x10/0x14)
[    5.300000] [<c0011438>] (show_stack+0x10/0x14) from [<c03a486c>] (dump_stack+0x7c/0xbc)
[    5.300000] [<c03a486c>] (dump_stack+0x7c/0xbc) from [<c00132e0>] (handle_IPI+0x130/0x15c)
[    5.300000] [<c00132e0>] (handle_IPI+0x130/0x15c) from [<c000859c>] (gic_handle_irq+0x60/0x68)
[    5.300000] [<c000859c>] (gic_handle_irq+0x60/0x68) from [<c0011f00>] (__irq_svc+0x40/0x70)
[    5.300000] Exception stack(0xef29ff80 to 0xef29ffc8)
[    5.300000] ff80: c07fc558 00000000 0093a607 00000000 00000000 00000000 c054b558 002b1000
[    5.300000] ffa0: 60000113 00000001 c07fc558 ef29e000 c0556438 ef29ffc8 c0064254 c0064258
[    5.300000] ffc0: 60000113 ffffffff
[    5.300000] [<c0011f00>] (__irq_svc+0x40/0x70) from [<c0064258>] (rcu_idle_exit+0x5c/0xb0)
[    5.300000] [<c0064258>] (rcu_idle_exit+0x5c/0xb0) from [<c005b4a4>] (cpu_startup_entry+0x68/0x148)
[    5.300000] [<c005b4a4>] (cpu_startup_entry+0x68/0x148) from [<50008644>] (0x50008644)
[    5.300000] CPU1: stopping
[    5.300000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-next-20131119-00004-g27f3f5f-dirty #11
[    5.300000] [<c0014068>] (unwind_backtrace+0x0/0xf8) from [<c0011438>] (show_stack+0x10/0x14)
[    5.300000] [<c0011438>] (show_stack+0x10/0x14) from [<c03a486c>] (dump_stack+0x7c/0xbc)
[    5.300000] [<c03a486c>] (dump_stack+0x7c/0xbc) from [<c00132e0>] (handle_IPI+0x130/0x15c)
[    5.300000] [<c00132e0>] (handle_IPI+0x130/0x15c) from [<c000859c>] (gic_handle_irq+0x60/0x68)
[    5.300000] [<c000859c>] (gic_handle_irq+0x60/0x68) from [<c0011f00>] (__irq_svc+0x40/0x70)
[    5.300000] Exception stack(0xef29bf80 to 0xef29bfc8)
[    5.300000] SMP: failed to stop secondary CPUs
[    5.465000] bf80: c07ec558 00000000 00938a81 00000000 00000000 00000000 c054b558 002a1000
[    5.475000] bfa0: 60000113 00000001 c07ec558 ef29a000 5572448d ef29bfc8 c0064254 c0064258
[    5.480000] bfc0: 60000113 ffffffff
[    5.485000] [<c0011f00>] (__irq_svc+0x40/0x70) from [<c0064258>] (rcu_idle_exit+0x5c/0xb0)
[    5.495000] [<c0064258>] (rcu_idle_exit+0x5c/0xb0) from [<c005b4a4>] (cpu_startup_entry+0x68/0x148)
[    5.505000] [<c005b4a4>] (cpu_startup_entry+0x68/0x148) from [<50008644>] (0x50008644)
[    5.510000] CPU0: stopping
[    5.515000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-next-20131119-00004-g27f3f5f-dirty #11
[    5.525000] [<c0014068>] (unwind_backtrace+0x0/0xf8) from [<c0011438>] (show_stack+0x10/0x14)
[    5.530000] [<c0011438>] (show_stack+0x10/0x14) from [<c03a486c>] (dump_stack+0x7c/0xbc)
[    5.540000] [<c03a486c>] (dump_stack+0x7c/0xbc) from [<c00132e0>] (handle_IPI+0x130/0x15c)
[    5.550000] [<c00132e0>] (handle_IPI+0x130/0x15c) from [<c000859c>] (gic_handle_irq+0x60/0x68)
[    5.555000] [<c000859c>] (gic_handle_irq+0x60/0x68) from [<c0011f00>] (__irq_svc+0x40/0x70)
[    5.565000] Exception stack(0xc054ff60 to 0xc054ffa8)
[    5.570000] ff60: c07e4558 00000000 00001796 00000000 c054e000 c05564b8 c03ab8d4 c054e000
[    5.580000] ff80: c058d3d5 00000001 c058d3d5 c054e000 55529a03 c054ffa8 c000f18c c000f190
[    5.585000] ffa0: 60000113 ffffffff
[    5.590000] [<c0011f00>] (__irq_svc+0x40/0x70) from [<c000f190>] (arch_cpu_idle+0x28/0x30)
[    5.600000] [<c000f190>] (arch_cpu_idle+0x28/0x30) from [<c005b494>] (cpu_startup_entry+0x58/0x148)
[    5.605000] [<c005b494>] (cpu_startup_entry+0x58/0x148) from [<c0513b28>] (start_kernel+0x384/0x3e4)


WARNING: multiple messages have this Message-ID (diff)
From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] Exynos 5410 Dual cluster support
Date: Wed, 20 Nov 2013 00:23:08 +0100	[thread overview]
Message-ID: <1951315.Ol55YFu91h@flatron> (raw)
In-Reply-To: <1383811969-32712-1-git-send-email-v.tyrtov@samsung.com>

Hi,

On Thursday 07 of November 2013 12:12:45 Vyacheslav Tyrtov wrote:
> The series of patches represent support of Exynos 5410 SoC
> 
> The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture
> Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time
> 
> Patches add new platform description, support of clock controller,
> dual cluster support and device tree for Exynos 5410
> 
> Has been build on v3.12.
> Has been tested on Exynos 5410 reference board (exynos_defconfig).

I've applied the patches on top of today's linux-next and tried to boot
my ODROID-XU using exynos5410-smdk5410.dts and exynos_defconfig, but all
I can get is an imprecise external abort, when the kernel tries to jump
to init. Full boot log below. Any ideas?

Best regards,
Tomasz

8><------------

U-Boot 2012.07-g2bcb371 (Nov 19 2013 - 20:17:37) for Exynos5410

CPU: Exynos5410 Rev2.3 [Samsung SOC on SMP Platform Base on ARM CortexA15]
APLL = 900MHz, KPLL = 600MHz
MPLL = 532MHz, BPLL = 800MHz
DRAM:  2 GiB
WARNING: Caches not enabled

TrustZone Enabled BSP
BL1 version: 
PMIC VER : 0, CHIP REV : 6
VDD MIF : 1.00000V
VDD ARM : 1.00000V
VDD INT : 1.00000V
VDD G3D : 1.00000V
VDD KFC : 1.00000V

Checking Boot Mode ... SDMMC
MMC:   S5P_MSHC2: 0, S5P_MSHC0: 1
MMC Device 0: 14.8 GiB
MMC Device 1: [ERROR] response error : 00000006 cmd 8
[ERROR] response error : 00000006 cmd 55
[ERROR] response error : 00000006 cmd 2
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Press 'Enter' or 'Space' to stop autoboot:  0 
ODROID-XU # 
ODROID-XU # 
ODROID-XU # pri        
baudrate=115200
bootargs=console=ttySAC2,115200n8 earlyprintk ignore_loglevel mem=1G root=/dev/mmcblk0p1 rootwait
bootcmd=run netboot
bootdelay=1
bootfile=uImage.xu
bootscript=source 40008000
copy_uboot_emmc2sd=emmc open 0;movi r z f 0 40000000;emmc close 0;movi w f 1 40000000;emmc open 0;movi r z b 0 40000000;emmc close 0;movi w b 1 40000000;emmc open 0;movi r z u 0 40000000;emmc close 0;movi w u 1 40000000;emmc open 0;movi r z t 0 40000000;emmc close 0;movi w t 1 40000000;mmc write 1 0x40008000 0x4CF 0x20;
copy_uboot_sd2emmc=movi r f 0 40000000;emmc open 1;movi w z f 1 40000000;emmc close 1;movi r b 0 40000000;emmc open 1;movi w z b 1 40000000;emmc close 1;movi r u 0 40000000;emmc open 1;movi w z u 1 40000000;emmc close 1;movi r t 0 40000000;emmc open 1;movi w z t 1 40000000;emmc close 1;mmc write 1 0x40008000 0x4CF 0x20;
default_bootcmd=echo >>> Run Default Bootcmd <<<;movi read kernel 0 40008000;bootz 40008000
ethact=sms0
ipaddr=192.168.1.20
loadbootscript_1=echo >>> Load Boot Script from mmc 0:1 <<<;fatload mmc 0:1 40008000 boot.scr
loadbootscript_2=echo >>> Load Boot Script from mmc 0:2 <<<;fatload mmc 0:2 40008000 boot.scr
loadbootscript_3=echo >>> Load Boot Script from mmc 1:1 <<<;fatload mmc 1:1 40008000 boot.scr
loadbootscript_4=echo >>> Load Boot Script from mmc 1:2 <<<;fatload mmc 1:2 40008000 boot.scr
netboot=usb start && tftpboot 40008000 && bootm 40008000
rootfslen=100000
serverip=192.168.1.2
stderr=serial
stdin=serial
stdout=serial
usbethaddr=00:11:22:33:44:55

Environment size: 1546/16380 bytes
ODROID-XU # run netboot
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.20
Filename 'uImage.xu'.
Load address: 0x40008000
Loading: #################################################################
         #################################################################
         #################################################################
         #########
done
Bytes transferred = 2980232 (2d7988 hex)
## Booting kernel from Legacy Image at 40008000 ...
   Image Name:   Linux-exynos5410-odroidxu
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2980168 Bytes = 2.8 MiB
   Load Address: 50008000
   Entry Point:  50008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
  
Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.0-next-20131119-00004-g27f3f5f-dirty (tom3q at flatron) (gcc version 4.7.2 (Gentoo 4.7.2-r1 p1.6, pie-0.5.5) ) #11 SMP PREEMPT Wed Nov 20 00:08:02 CET 2013
[    0.000000] CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Hardkernel ODROID-XU board based on EXYNOS5410
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] CPU EXYNOS5410 (id 0xe5410023)
[    0.000000] On node 0 totalpages: 262144
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 528 pages used for memmap
[    0.000000]   HighMem zone: 67584 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 7 pages/cpu @c07e4000 s7552 r8192 d12928 u32768
[    0.000000] pcpu-alloc: s7552 r8192 d12928 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
[    0.000000] Kernel command line: console=ttySAC2,115200n8 earlyprintk ignore_loglevel mem=1G root=/dev/mmcblk0p1 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1033268K/1048576K available (3860K kernel code, 254K rwdata, 1300K rodata, 231K init, 288K bss, 15308K reserved, 270336K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0512398   (5161 kB)
[    0.000000]       .init : 0xc0513000 - 0xc054cd80   ( 232 kB)
[    0.000000]       .data : 0xc054e000 - 0xc058d9e0   ( 255 kB)
[    0.000000]        .bss : 0xc058d9ec - 0xc05d5aa8   ( 289 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] sched_clock: 32 bits@200 Hz, resolution 5000000ns, wraps every 10737418240000000ns
[    0.000000] Console: colour dummy device 80x30
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.020000] Calibrating delay loop... 1785.85 BogoMIPS (lpj=4464640)
[    0.045000] pid_max: default: 32768 minimum: 301
[    0.050000] Mount-cache hash table entries: 512
[    0.055000] Initializing cgroup subsys memory
[    0.060000] Initializing cgroup subsys devices
[    0.065000] Initializing cgroup subsys freezer
[    0.070000] Initializing cgroup subsys blkio
[    0.075000] CPU: Testing write buffer coherency: ok
[    0.080000] CPU0: update cpu_power 1468
[    0.085000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.090000] Setting up static identity map for 0x503a9c48 - 0x503a9ca0
[    0.095000] ARM CCI driver probed
[    0.100000] EDCS power management initialized
[    0.135000] CPU1: Booted secondary processor
[    0.175000] CPU1: update cpu_power 1468
[    0.175000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.185000] CPU2: Booted secondary processor
[    0.225000] CPU2: update cpu_power 1468
[    0.225000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.235000] CPU3: Booted secondary processor
[    0.275000] CPU3: update cpu_power 1468
[    0.275000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    1.285000] CPU4: failed to come online
[    2.300000] CPU5: failed to come online
[    3.310000] CPU6: failed to come online
[    4.320000] CPU7: failed to come online
[    4.320000] Brought up 4 CPUs
[    4.325000] SMP: Total of 4 processors activated.
[    4.330000] CPU: All CPU(s) started in SVC mode.
[    4.335000] devtmpfs: initialized
[    4.345000] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    4.350000] pinctrl core: initialized pinctrl subsystem
[    4.355000] regulator-dummy: no parameters
[    4.355000] NET: Registered protocol family 16
[    4.360000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    4.370000] S3C Power Management, Copyright 2004 Simtec Electronics
[    4.375000] EXYNOS: PMU not supported
[    4.380000] EXYNOS: Initializing architecture
[    4.395000] bio: create slab <bio-0> at 0
[    4.405000] SCSI subsystem initialized
[    4.405000] usbcore: registered new interface driver usbfs
[    4.410000] usbcore: registered new interface driver hub
[    4.420000] usbcore: registered new device driver usb
[    4.425000] Switched to clocksource mct-frc
[    4.440000] NET: Registered protocol family 2
[    4.445000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    4.455000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    4.460000] TCP: Hash tables configured (established 8192 bind 8192)
[    4.465000] TCP: reno registered
[    4.470000] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    4.475000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    4.485000] NET: Registered protocol family 1
[    4.490000] audit: initializing netlink socket (disabled)
[    4.495000] type=2000 audit(4.495:1): initialized
[    4.500000] bounce pool size: 64 pages
[    4.520000] ROMFS MTD (C) 2007 Red Hat, Inc.
[    4.525000] msgmni has been set to 1490
[    4.530000] io scheduler noop registered
[    4.530000] io scheduler deadline registered (default)
[    4.535000] io scheduler cfq registered
[    4.655000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    4.665000] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10
[    4.675000] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10
[    4.680000] console [tt[SAC2] enabled
    4.680000] console [ttySAC2] enabled
[    4.690000] bootconsole [early[on0] disabled
    4.690000] bootconsole [earlycon0] disabled
[    4.700000] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10
[    4.715000] brd: module loaded
[    4.720000] loop: module loaded
[    4.725000] usbcore: registered new interface driver asix
[    4.730000] usbcore: registered new interface driver ax88179_178a
[    4.735000] usbcore: registered new interface driver cdc_ether
[    4.740000] usbcore: registered new interface driver r815x
[    4.745000] usbcore: registered new interface driver smsc75xx
[    4.755000] usbcore: registered new interface driver smsc95xx
[    4.760000] usbcore: registered new interface driver net1080
[    4.765000] usbcore: registered new interface driver cdc_subset
[    4.770000] usbcore: registered new interface driver zaurus
[    4.775000] usbcore: registered new interface driver cdc_ncm
[    4.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.790000] usbcore: registered new interface driver usb-storage
[    4.795000] mousedev: PS/2 mouse device common for all mice
[    4.800000] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel at redhat.com
[    4.810000] sdhci: Secure Digital Host Controller Interface driver
[    4.815000] sdhci: Copyright(c) Pierre Ossman
[    4.820000] Synopsys Designware Multimedia Card Interface Driver
[    4.825000] dwmmc_exynos 12200000.mmc: dummy supplies not allowed
[    4.830000] dwmmc_exynos 12200000.mmc: no vmmc regulator found: -19
[    4.835000] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    4.845000] dwmmc_exynos 12200000.mmc: Version ID is 241a
[    4.850000] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107, 64 bit host data width, 128 deep fifo
[    4.860000] of_get_named_gpiod_flags: can't parse gpios property of node '/mmc at 12200000/slot at 0[0]'
[    4.895000] dwmmc_exynos 12200000.mmc: 1 slots initialized
[    4.895000] dwmmc_exynos 12220000.mmc: dummy supplies not allowed
[    4.905000] dwmmc_exynos 12220000.mmc: no vmmc regulator found: -19
[    4.910000] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    4.915000] dwmmc_exynos 12220000.mmc: Version ID is 241a
[    4.920000] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109, 64 bit host data width, 128 deep fifo
[    4.930000] of_get_named_gpiod_flags: can't parse gpios property of node '/mmc at 12220000/slot at 0[0]'
[    4.970000] dwmmc_exynos 12220000.mmc: 1 slots initialized
[    4.975000] usbcore: registered new interface driver usbhid
[    4.980000] usbhid: USB HID core driver
[    4.980000] TCP: cubic registered
[    4.985000] NET: Registered protocol family 17
[    4.990000] NET: Registered protocol family 15
[    4.995000] Registering SWP/SWPB emulation handler
[    5.000000] registered taskstats version 1
[    5.005000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    5.010000] Waiting for root device /dev/mmcblk0p1...
[    5.025000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz, actual 25000000HZ div = 1)
[    5.035000] mmc1: new SDHC card at address e624
[    5.040000] isa bounce pool size: 16 pages
[    5.045000] mmcblk0: mmc1:e624 SU16G 14.8 GiB 
[    5.050000]  mmcblk0: p1
[    5.120000] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[    5.125000] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[    5.145000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    5.150000] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    5.165000] devtmpfs: mounted
[    5.170000] Freeing unused kernel memory: 228K (c0513000 - c054c000)
[    5.195000] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[    5.210000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
[    5.210000] 
[    5.210000] CPU: 2 PID: 1 Comm: init Not tainted 3.12.0-next-20131119-00004-g27f3f5f-dirty #11
[    5.210000] [<c0014068>] (unwind_backtrace+0x0/0xf8) from [<c0011438>] (show_stack+0x10/0x14)
[    5.210000] [<c0011438>] (show_stack+0x10/0x14) from [<c03a486c>] (dump_stack+0x7c/0xbc)
[    5.210000] [<c03a486c>] (dump_stack+0x7c/0xbc) from [<c03a1e78>] (panic+0x8c/0x1e4)
[    5.210000] [<c03a1e78>] (panic+0x8c/0x1e4) from [<c001f504>] (do_exit+0x850/0x920)
[    5.210000] [<c001f504>] (do_exit+0x850/0x920) from [<c001f63c>] (do_group_exit+0x3c/0xb0)
[    5.210000] [<c001f63c>] (do_group_exit+0x3c/0xb0) from [<c0029e1c>] (get_signal_to_deliver+0x1d4/0x538)
[    5.210000] [<c0029e1c>] (get_signal_to_deliver+0x1d4/0x538) from [<c0010974>] (do_signal+0x100/0x40c)
[    5.210000] [<c0010974>] (do_signal+0x100/0x40c) from [<c0010fb4>] (do_work_pending+0x68/0xa8)
[    5.210000] [<c0010fb4>] (do_work_pending+0x68/0xa8) from [<c000e620>] (work_pending+0xc/0x20)
[    5.300000] CPU3: stopping
[    5.300000] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.12.0-next-20131119-00004-g27f3f5f-dirty #11
[    5.300000] [<c0014068>] (unwind_backtrace+0x0/0xf8) from [<c0011438>] (show_stack+0x10/0x14)
[    5.300000] [<c0011438>] (show_stack+0x10/0x14) from [<c03a486c>] (dump_stack+0x7c/0xbc)
[    5.300000] [<c03a486c>] (dump_stack+0x7c/0xbc) from [<c00132e0>] (handle_IPI+0x130/0x15c)
[    5.300000] [<c00132e0>] (handle_IPI+0x130/0x15c) from [<c000859c>] (gic_handle_irq+0x60/0x68)
[    5.300000] [<c000859c>] (gic_handle_irq+0x60/0x68) from [<c0011f00>] (__irq_svc+0x40/0x70)
[    5.300000] Exception stack(0xef29ff80 to 0xef29ffc8)
[    5.300000] ff80: c07fc558 00000000 0093a607 00000000 00000000 00000000 c054b558 002b1000
[    5.300000] ffa0: 60000113 00000001 c07fc558 ef29e000 c0556438 ef29ffc8 c0064254 c0064258
[    5.300000] ffc0: 60000113 ffffffff
[    5.300000] [<c0011f00>] (__irq_svc+0x40/0x70) from [<c0064258>] (rcu_idle_exit+0x5c/0xb0)
[    5.300000] [<c0064258>] (rcu_idle_exit+0x5c/0xb0) from [<c005b4a4>] (cpu_startup_entry+0x68/0x148)
[    5.300000] [<c005b4a4>] (cpu_startup_entry+0x68/0x148) from [<50008644>] (0x50008644)
[    5.300000] CPU1: stopping
[    5.300000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-next-20131119-00004-g27f3f5f-dirty #11
[    5.300000] [<c0014068>] (unwind_backtrace+0x0/0xf8) from [<c0011438>] (show_stack+0x10/0x14)
[    5.300000] [<c0011438>] (show_stack+0x10/0x14) from [<c03a486c>] (dump_stack+0x7c/0xbc)
[    5.300000] [<c03a486c>] (dump_stack+0x7c/0xbc) from [<c00132e0>] (handle_IPI+0x130/0x15c)
[    5.300000] [<c00132e0>] (handle_IPI+0x130/0x15c) from [<c000859c>] (gic_handle_irq+0x60/0x68)
[    5.300000] [<c000859c>] (gic_handle_irq+0x60/0x68) from [<c0011f00>] (__irq_svc+0x40/0x70)
[    5.300000] Exception stack(0xef29bf80 to 0xef29bfc8)
[    5.300000] SMP: failed to stop secondary CPUs
[    5.465000] bf80: c07ec558 00000000 00938a81 00000000 00000000 00000000 c054b558 002a1000
[    5.475000] bfa0: 60000113 00000001 c07ec558 ef29a000 5572448d ef29bfc8 c0064254 c0064258
[    5.480000] bfc0: 60000113 ffffffff
[    5.485000] [<c0011f00>] (__irq_svc+0x40/0x70) from [<c0064258>] (rcu_idle_exit+0x5c/0xb0)
[    5.495000] [<c0064258>] (rcu_idle_exit+0x5c/0xb0) from [<c005b4a4>] (cpu_startup_entry+0x68/0x148)
[    5.505000] [<c005b4a4>] (cpu_startup_entry+0x68/0x148) from [<50008644>] (0x50008644)
[    5.510000] CPU0: stopping
[    5.515000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-next-20131119-00004-g27f3f5f-dirty #11
[    5.525000] [<c0014068>] (unwind_backtrace+0x0/0xf8) from [<c0011438>] (show_stack+0x10/0x14)
[    5.530000] [<c0011438>] (show_stack+0x10/0x14) from [<c03a486c>] (dump_stack+0x7c/0xbc)
[    5.540000] [<c03a486c>] (dump_stack+0x7c/0xbc) from [<c00132e0>] (handle_IPI+0x130/0x15c)
[    5.550000] [<c00132e0>] (handle_IPI+0x130/0x15c) from [<c000859c>] (gic_handle_irq+0x60/0x68)
[    5.555000] [<c000859c>] (gic_handle_irq+0x60/0x68) from [<c0011f00>] (__irq_svc+0x40/0x70)
[    5.565000] Exception stack(0xc054ff60 to 0xc054ffa8)
[    5.570000] ff60: c07e4558 00000000 00001796 00000000 c054e000 c05564b8 c03ab8d4 c054e000
[    5.580000] ff80: c058d3d5 00000001 c058d3d5 c054e000 55529a03 c054ffa8 c000f18c c000f190
[    5.585000] ffa0: 60000113 ffffffff
[    5.590000] [<c0011f00>] (__irq_svc+0x40/0x70) from [<c000f190>] (arch_cpu_idle+0x28/0x30)
[    5.600000] [<c000f190>] (arch_cpu_idle+0x28/0x30) from [<c005b494>] (cpu_startup_entry+0x58/0x148)
[    5.605000] [<c005b494>] (cpu_startup_entry+0x58/0x148) from [<c0513b28>] (start_kernel+0x384/0x3e4)

  parent reply	other threads:[~2013-11-19 23:23 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-07  8:12 [PATCH v3 0/4] Exynos 5410 Dual cluster support Vyacheslav Tyrtov
2013-11-07  8:12 ` Vyacheslav Tyrtov
2013-11-07  8:12 ` [PATCH v3 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC Vyacheslav Tyrtov
2013-11-07  8:12   ` Vyacheslav Tyrtov
2013-11-10 17:31   ` Tomasz Figa
2013-11-10 17:31     ` Tomasz Figa
2013-11-07  8:12 ` [PATCH v3 2/4] clk: exynos5410: register clocks using common clock framework Vyacheslav Tyrtov
2013-11-07  8:12   ` Vyacheslav Tyrtov
2013-11-10 17:41   ` Tomasz Figa
2013-11-10 17:41     ` Tomasz Figa
2013-11-07  8:12 ` [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support Vyacheslav Tyrtov
2013-11-07  8:12   ` Vyacheslav Tyrtov
2013-11-07 13:01   ` Dave Martin
2013-11-07 13:01     ` Dave Martin
2013-11-07 16:46     ` Nicolas Pitre
2013-11-07 16:46       ` Nicolas Pitre
2013-11-07 16:47     ` Nicolas Pitre
2013-11-07 16:47       ` Nicolas Pitre
2013-11-07 16:51     ` Nicolas Pitre
2013-11-07 16:51       ` Nicolas Pitre
2013-11-07 17:05       ` Nicolas Pitre
2013-11-07 17:05         ` Nicolas Pitre
     [not found]     ` <20131107130141.GA3129-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2013-11-11  8:13       ` Tarek Dakhran
2013-11-11  8:13         ` Tarek Dakhran
2013-11-11  8:13         ` Tarek Dakhran
2013-11-07  8:12 ` [PATCH v3 4/4] ARM: dts: Add initial device tree support for EXYNOS5410 Vyacheslav Tyrtov
2013-11-07  8:12   ` Vyacheslav Tyrtov
2013-11-10 18:02   ` Tomasz Figa
2013-11-10 18:02     ` Tomasz Figa
2013-11-11  8:03     ` Tarek Dakhran
2013-11-11  8:03       ` Tarek Dakhran
2013-11-19 23:23 ` Tomasz Figa [this message]
2013-11-19 23:23   ` [PATCH v3 0/4] Exynos 5410 Dual cluster support Tomasz Figa
2013-11-20 13:54   ` Tarek Dakhran
2013-11-20 13:54     ` Tarek Dakhran
2013-11-22  1:05     ` Mauro Ribeiro
2013-11-22  1:05       ` Mauro Ribeiro
2013-11-28 10:45     ` Alexei Colin
2013-11-28 10:45       ` Alexei Colin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1951315.Ol55YFu91h@flatron \
    --to=tomasz.figa@gmail.com \
    --cc=Dave.Martin@arm.com \
    --cc=ben-linux@fluff.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@linaro.org \
    --cc=nicolas.pitre@linaro.org \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=romain.naour@openwide.fr \
    --cc=swarren@wwwdotorg.org \
    --cc=t.dakhran@samsung.com \
    --cc=tglx@linutronix.de \
    --cc=v.tyrtov@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.