[PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code
@ 2012-03-06 16:32 Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 01/35] v4l: Introduce integer menu controls Sakari Ailus
                   ` (34 more replies)
  0 siblings, 35 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media@vger.kernel.org
  Cc: Laurent Pinchart, David Cohen, Sylwester Nawrocki, Hans Verkuil,
	Andy Shevchenko, Tomasz Stanislawski, tuukkat76, Kamil Debski,
	Kim HeungJun, teturtia, pradeep.sawlani

Hi everyone,

This the fifth version of my patchset that contains:

- Integer menu controls [2],
- Selection IOCTL for subdevs [3],
- Sensor control changes [5,7],
- link_validate() media entity and V4L2 subdev pad ops,
- OMAP 3 ISP driver improvements [4],
- SMIA++ sensor driver,
- rm680/rm696 board code (a.k.a Nokia N9 and N950) and
- Other V4L2 and media improvements (see individual patches)

The Docbook documentation in HTML format can be found in [15] (v3
documentation available in [11] and v4 in [13]).


The issue with "ACTIVE" target names still needs to be addressed. The
current proposal is "CURRENT". To be discussed on IRC.


Changes to version 4 [16]:

- V4L2 / V4L2 subdev
  - Documentation
    - Spelling fixes
    - Red lines in diagrams dotted instead of solid
    - Proper ordering of raw bayer formats

- SMIA++ driver
  - PLL code separated from the actual driver
  - Source pads are always zero now
  - Error handling fixes in nvm reading
  - Try format pixel code handling fixes
  - Miscellaneous code cleanups

- Media controller
  - Dropped the patch to find entities; moved to omap3isp driver instead

- OMAP 3 ISP
  - Find out external entity's pad number, don't assume zero (new patch)
  - Small cleanups
  - Entities in pipeline stored in struct isp_pipeline

Changes to version 3 [12] include:

- OMAP 3 ISP
  - Rework ISP driver patches
  - Remove code from isp_video_pipeline_validate in same patch as the
    functionality is added elsewhere (old patch to remove leftovers
    dropped)
  - isp_video_streamon() error handling cleanups
  - All pipeline validation performed before any s_straem subdev ops
    - Resizer data rate check moved to link validation
    - CCDC rate checked in isp_video_check_external_subdeva()
  - Formats checked during link validation
  - Remove means to set pixel rate (new patch)
  - Don't set link_validate pad ops where the default is sufficient

- Media controller
  - media_entity_pipeline_start() collects information on entities in
    pipeline
  - link validation error handling fix

- V4L2 / V4L2 subdev
  - Less confusing selection example diagrams
  - Selection documentation improvements  (as also suggested by Laurent)

- SMIA++ driver
  - Fixes according to Laurent's suggestions [14]
  - Locking fixes and power handling cleanups

Changes to version 2 [10] include:

- V4L2
  - Image source controls
    - Documentation no longer refers to "pixel clock" in v4l2_mbus_framefmt
      (this should have been the last reference to those!!)
    - Capitalise first letters in control names
  - Selections
    - Use hex numbers for targets
  - Return NULL instead of invalid pointer when accessing non-existend pads
    in v4l2_subdev_get_try_{format,crop,compose} (new patch)
  - Put link validation definitions in v4l2-subdev.h behind
    #ifdef CONFIG_MEDIA_CONTROLLER ... #endif
  - Spelling fixes (selections and 4cc guidelines)
  - Change vdev_to_v4l2_subdev() return type to struct v4l2_subdev * (new
    patch)

- SMIA++ driver
  - Clock tree calculation fixes
  - Control handler setup usage fixes at smiapp_open()
  - Don't access non-existent pads

Changes to version 1 [8] include:

- OMAP 3 ISP driver
  - Swapped order of csi receiver's lane definitions
  - Rewrote omap 3 isp link validation patches almost completely
    - Information on connected external entity collected to isp_pipeline
    - Information collected during link checking and used at streamon

- Media entity link validation
  - Error handling fixes

- SMIA++ driver
  - Selection API bugfixes
  - Report correct pixel order right from boot
  - Move link rate control to subdev connected to subdev external to the
    sensor (e.g. ISP's CSI-2 receiver)
  - Introduce proper serialisation
  - Deny changing some controls when streaming (flipping and link rate)
  - Control handler setup moved from streamon time to first subdev open
  - There is no source compose target
  - Bugfixes

- Media bus pixel codes
  - Documentation fix for dpcm compressed formats
  - Added patch for 4CC guidelines (raw bayer only for now)

- Selections
  - Improved selections documentation
  - Added more selections examples
  - Compose target is not available on source pads anymore [9]
  - Dropped default targets

- V4L2
  - Add documentation on link_validate()
  - link_validate() and relater functions  depends on
CONFIG_MEDIA_CONTROLLER
  - Skip link validation for links on which stream_count was non-zero
  - Do not validate link if entity's stream count is non-zero
  - Use v4l2_subdev_link_validate_default() if no link_validate pad op
is set
  - Allow changing control handler mutex: this enables a driver to provide
    multiple subdevs but use only one mutex. Default mutex (part of struct
    v4l2_ctrl_handler) is set in v4l2_ctrl_handler_init().
  - Split image source class into two: image source and image processing

Changes to the RFC v1 [6] include:

- Integer controls:
  - Target Linux 3.4 instead of 3.3
  - Proper control type check in querymenu
  - vivi compile fixes

- Subdev selections
  - Pad try fields combined to single struct
  - Correctly set sel.which based on crop->which in crop fall-back

- Subdev selection documentation
  - Better explanation on image processing in subdevs
  - Added a diagram to visualise subdev configuration
  - Fixed DocBook syntax issues
  - Mark VIDIOC_SUBDEV_S_CROP and VIDIOC_SUBDEV_G_CROP obsolete

- Pixel rate
  - Pixel rate is now a 64-bit control, not part of v4l2_mbus_framefmt
  - Unit for pixel rate is pixels / second
  - Pixel rate is read-only

- Link frequency is now in Hz --- documented as such also

- Link validation instead of pipeline validation
  - Each link is validated by calling link_validate op
    - Added link validation op to media_entity_ops
  - Link validation op in pad ops makes this easy for subdev drivers
  - media_entity_pipeline_start() may return an error code now
    - This might affect other drivers, but will warn in compilation.
      No adverse effects are caused if the driver does not use
      link_validate().

- OMAP 3 ISP
  - Make lanecfg as part of the platform data structure, not pointer
  - Document lane configuration structures
  - Link validation moved to respective subdev drivers from ispvideo.c
    - isp_validate_pipeline() removed

- SMIA++ driver
  - Update pixel order based on vflip and hflip
  - Cleanups in the main driver, register definitions and PLL code
  - Depend on V4L2_V4L2_SUBDEV_API and MEDIA_CONTROLLER
  - Use pr_* macros instead of printk
  - Improved error handling for i2c_transfer()
  - Removed useless definitions
  - Don't access try crop / compose directly but use helper functions
  - Add xshutdown to platform data
  - Move driver under smiapp directory

- rm680 board code
  - Use REGULATOR_SUPPLY() where possible
  - Removed printk()'s
  - Don't include private smiapp headers


References:

[1] http://www.spinics.net/lists/linux-omap/msg61295.html

[2] http://www.spinics.net/lists/linux-media/msg40796.html

[3] http://www.spinics.net/lists/linux-media/msg41503.html

[4] http://www.spinics.net/lists/linux-media/msg41542.html

[5] http://www.spinics.net/lists/linux-media/msg40861.html

[6] http://www.spinics.net/lists/linux-media/msg41765.html

[7] http://www.spinics.net/lists/linux-media/msg42848.html

[8] http://www.spinics.net/lists/linux-media/msg42991.html

[9] http://www.spinics.net/lists/linux-media/msg43810.html

[10] http://www.spinics.net/lists/linux-media/msg43888.html

[11] http://www.retiisi.org.uk/v4l2/tmp/media_api/

[12] http://www.spinics.net/lists/linux-media/msg44405.html

[13] http://www.retiisi.org.uk/v4l2/tmp/media_api2/

[14] http://www.spinics.net/lists/linux-media/msg44704.html

[15] http://wwww.retiisi.org.uk/v4l2/tmp/media_api3/

[16] http://www.spinics.net/lists/linux-media/msg44843.html

Kind regards,

-- 
Sakari Ailus
sakari.ailus@iki.fi

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 01/35] v4l: Introduce integer menu controls
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 02/35] v4l: Document " Sakari Ailus
                   ` (33 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Create a new control type called V4L2_CTRL_TYPE_INTEGER_MENU. Integer menu
controls are just like menu controls but the menu items are 64-bit integers
rather than strings.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 drivers/media/video/v4l2-ctrls.c |   74 +++++++++++++++++++++++++++++---------
 include/linux/videodev2.h        |    6 +++-
 include/media/v4l2-ctrls.h       |    6 +++-
 3 files changed, 67 insertions(+), 19 deletions(-)

diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 9091172..f0484bd 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -828,7 +828,8 @@ static void fill_event(struct v4l2_event *ev, struct v4l2_ctrl *ctrl, u32 change
 		ev->u.ctrl.value64 = ctrl->cur.val64;
 	ev->u.ctrl.minimum = ctrl->minimum;
 	ev->u.ctrl.maximum = ctrl->maximum;
-	if (ctrl->type == V4L2_CTRL_TYPE_MENU)
+	if (ctrl->type == V4L2_CTRL_TYPE_MENU
+	    || ctrl->type == V4L2_CTRL_TYPE_INTEGER_MENU)
 		ev->u.ctrl.step = 1;
 	else
 		ev->u.ctrl.step = ctrl->step;
@@ -1059,10 +1060,13 @@ static int validate_new_int(const struct v4l2_ctrl *ctrl, s32 *pval)
 		return 0;
 
 	case V4L2_CTRL_TYPE_MENU:
+	case V4L2_CTRL_TYPE_INTEGER_MENU:
 		if (val < ctrl->minimum || val > ctrl->maximum)
 			return -ERANGE;
-		if (ctrl->qmenu[val][0] == '\0' ||
-		    (ctrl->menu_skip_mask & (1 << val)))
+		if (ctrl->menu_skip_mask & (1 << val))
+			return -EINVAL;
+		if (ctrl->type == V4L2_CTRL_TYPE_MENU &&
+		    ctrl->qmenu[val][0] == '\0')
 			return -EINVAL;
 		return 0;
 
@@ -1090,6 +1094,7 @@ static int validate_new(const struct v4l2_ctrl *ctrl, struct v4l2_ext_control *c
 	case V4L2_CTRL_TYPE_INTEGER:
 	case V4L2_CTRL_TYPE_BOOLEAN:
 	case V4L2_CTRL_TYPE_MENU:
+	case V4L2_CTRL_TYPE_INTEGER_MENU:
 	case V4L2_CTRL_TYPE_BITMASK:
 	case V4L2_CTRL_TYPE_BUTTON:
 	case V4L2_CTRL_TYPE_CTRL_CLASS:
@@ -1319,7 +1324,8 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, const char *name, enum v4l2_ctrl_type type,
 			s32 min, s32 max, u32 step, s32 def,
-			u32 flags, const char * const *qmenu, void *priv)
+			u32 flags, const char * const *qmenu,
+			const s64 *qmenu_int, void *priv)
 {
 	struct v4l2_ctrl *ctrl;
 	unsigned sz_extra = 0;
@@ -1332,6 +1338,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 	    (type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
 	    (type == V4L2_CTRL_TYPE_BITMASK && max == 0) ||
 	    (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
+	    (type == V4L2_CTRL_TYPE_INTEGER_MENU && qmenu_int == NULL) ||
 	    (type == V4L2_CTRL_TYPE_STRING && max == 0)) {
 		handler_set_err(hdl, -ERANGE);
 		return NULL;
@@ -1342,6 +1349,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 	}
 	if ((type == V4L2_CTRL_TYPE_INTEGER ||
 	     type == V4L2_CTRL_TYPE_MENU ||
+	     type == V4L2_CTRL_TYPE_INTEGER_MENU ||
 	     type == V4L2_CTRL_TYPE_BOOLEAN) &&
 	    (def < min || def > max)) {
 		handler_set_err(hdl, -ERANGE);
@@ -1376,7 +1384,10 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 	ctrl->minimum = min;
 	ctrl->maximum = max;
 	ctrl->step = step;
-	ctrl->qmenu = qmenu;
+	if (type == V4L2_CTRL_TYPE_MENU)
+		ctrl->qmenu = qmenu;
+	else if (type == V4L2_CTRL_TYPE_INTEGER_MENU)
+		ctrl->qmenu_int = qmenu_int;
 	ctrl->priv = priv;
 	ctrl->cur.val = ctrl->val = ctrl->default_value = def;
 
@@ -1403,6 +1414,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
 	struct v4l2_ctrl *ctrl;
 	const char *name = cfg->name;
 	const char * const *qmenu = cfg->qmenu;
+	const s64 *qmenu_int = cfg->qmenu_int;
 	enum v4l2_ctrl_type type = cfg->type;
 	u32 flags = cfg->flags;
 	s32 min = cfg->min;
@@ -1414,18 +1426,24 @@ struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
 		v4l2_ctrl_fill(cfg->id, &name, &type, &min, &max, &step,
 								&def, &flags);
 
-	is_menu = (cfg->type == V4L2_CTRL_TYPE_MENU);
+	is_menu = (cfg->type == V4L2_CTRL_TYPE_MENU ||
+		   cfg->type == V4L2_CTRL_TYPE_INTEGER_MENU);
 	if (is_menu)
 		WARN_ON(step);
 	else
 		WARN_ON(cfg->menu_skip_mask);
-	if (is_menu && qmenu == NULL)
+	if (cfg->type == V4L2_CTRL_TYPE_MENU && qmenu == NULL)
 		qmenu = v4l2_ctrl_get_menu(cfg->id);
+	else if (cfg->type == V4L2_CTRL_TYPE_INTEGER_MENU &&
+		 qmenu_int == NULL) {
+		handler_set_err(hdl, -EINVAL);
+		return NULL;
+	}
 
 	ctrl = v4l2_ctrl_new(hdl, cfg->ops, cfg->id, name,
 			type, min, max,
 			is_menu ? cfg->menu_skip_mask : step,
-			def, flags, qmenu, priv);
+			def, flags, qmenu, qmenu_int, priv);
 	if (ctrl)
 		ctrl->is_private = cfg->is_private;
 	return ctrl;
@@ -1442,12 +1460,13 @@ struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
 	u32 flags;
 
 	v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
-	if (type == V4L2_CTRL_TYPE_MENU) {
+	if (type == V4L2_CTRL_TYPE_MENU
+	    || type == V4L2_CTRL_TYPE_INTEGER_MENU) {
 		handler_set_err(hdl, -EINVAL);
 		return NULL;
 	}
 	return v4l2_ctrl_new(hdl, ops, id, name, type,
-				    min, max, step, def, flags, NULL, NULL);
+			     min, max, step, def, flags, NULL, NULL, NULL);
 }
 EXPORT_SYMBOL(v4l2_ctrl_new_std);
 
@@ -1469,7 +1488,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
 		return NULL;
 	}
 	return v4l2_ctrl_new(hdl, ops, id, name, type,
-				    0, max, mask, def, flags, qmenu, NULL);
+			     0, max, mask, def, flags, qmenu, NULL, NULL);
 }
 EXPORT_SYMBOL(v4l2_ctrl_new_std_menu);
 
@@ -1633,6 +1652,9 @@ static void log_ctrl(const struct v4l2_ctrl *ctrl,
 	case V4L2_CTRL_TYPE_MENU:
 		printk(KERN_CONT "%s", ctrl->qmenu[ctrl->cur.val]);
 		break;
+	case V4L2_CTRL_TYPE_INTEGER_MENU:
+		printk(KERN_CONT "%lld", ctrl->qmenu_int[ctrl->cur.val]);
+		break;
 	case V4L2_CTRL_TYPE_BITMASK:
 		printk(KERN_CONT "0x%08x", ctrl->cur.val);
 		break;
@@ -1769,7 +1791,8 @@ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc)
 	qc->minimum = ctrl->minimum;
 	qc->maximum = ctrl->maximum;
 	qc->default_value = ctrl->default_value;
-	if (ctrl->type == V4L2_CTRL_TYPE_MENU)
+	if (ctrl->type == V4L2_CTRL_TYPE_MENU
+	    || ctrl->type == V4L2_CTRL_TYPE_INTEGER_MENU)
 		qc->step = 1;
 	else
 		qc->step = ctrl->step;
@@ -1799,16 +1822,33 @@ int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm)
 
 	qm->reserved = 0;
 	/* Sanity checks */
-	if (ctrl->qmenu == NULL ||
-	    i < ctrl->minimum || i > ctrl->maximum)
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_MENU:
+		if (ctrl->qmenu == NULL)
+			return -EINVAL;
+		break;
+	case V4L2_CTRL_TYPE_INTEGER_MENU:
+		if (ctrl->qmenu_int == NULL)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (i < ctrl->minimum || i > ctrl->maximum)
 		return -EINVAL;
+
 	/* Use mask to see if this menu item should be skipped */
 	if (ctrl->menu_skip_mask & (1 << i))
 		return -EINVAL;
 	/* Empty menu items should also be skipped */
-	if (ctrl->qmenu[i] == NULL || ctrl->qmenu[i][0] == '\0')
-		return -EINVAL;
-	strlcpy(qm->name, ctrl->qmenu[i], sizeof(qm->name));
+	if (ctrl->type == V4L2_CTRL_TYPE_MENU) {
+		if (ctrl->qmenu[i] == NULL || ctrl->qmenu[i][0] == '\0')
+			return -EINVAL;
+		strlcpy(qm->name, ctrl->qmenu[i], sizeof(qm->name));
+	} else {
+		qm->value = ctrl->qmenu_int[i];
+	}
 	return 0;
 }
 EXPORT_SYMBOL(v4l2_querymenu);
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index b739d7d..e3c6302 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1150,6 +1150,7 @@ enum v4l2_ctrl_type {
 	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
 	V4L2_CTRL_TYPE_STRING        = 7,
 	V4L2_CTRL_TYPE_BITMASK       = 8,
+	V4L2_CTRL_TYPE_INTEGER_MENU = 9,
 };
 
 /*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
@@ -1169,7 +1170,10 @@ struct v4l2_queryctrl {
 struct v4l2_querymenu {
 	__u32		id;
 	__u32		index;
-	__u8		name[32];	/* Whatever */
+	union {
+		__u8	name[32];	/* Whatever */
+		__s64	value;
+	};
 	__u32		reserved;
 };
 
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 3dbd066..533315b 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -130,7 +130,10 @@ struct v4l2_ctrl {
 		u32 step;
 		u32 menu_skip_mask;
 	};
-	const char * const *qmenu;
+	union {
+		const char * const *qmenu;
+		const s64 *qmenu_int;
+	};
 	unsigned long flags;
 	union {
 		s32 val;
@@ -220,6 +223,7 @@ struct v4l2_ctrl_config {
 	u32 flags;
 	u32 menu_skip_mask;
 	const char * const *qmenu;
+	const s64 *qmenu_int;
 	unsigned int is_private:1;
 };
 
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 02/35] v4l: Document integer menu controls
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 01/35] v4l: Introduce integer menu controls Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 03/35] vivi: Add an integer menu test control Sakari Ailus
                   ` (32 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/DocBook/media/v4l/compat.xml         |   10 +++++
 Documentation/DocBook/media/v4l/v4l2.xml           |    6 +++
 .../DocBook/media/v4l/vidioc-queryctrl.xml         |   39 +++++++++++++++++++-
 3 files changed, 53 insertions(+), 2 deletions(-)

diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index c93298f..8cd5c96 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2400,6 +2400,16 @@ details.</para>
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.4</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added integer menus, the new type will be
+	  V4L2_CTRL_TYPE_INTEGER_MENU.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index dcf9e33..ff11a13 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -128,6 +128,12 @@ structs, ioctls) must be noted in more detail in the history chapter
 applications. -->
 
       <revision>
+	<revnumber>3.4</revnumber>
+	<date>2012-01-26</date>
+	<authorinitials>sa</authorinitials>
+	<revremark>Added V4L2_CTRL_TYPE_INTEGER_MENU.</revremark>
+      </revision>
+      <revision>
 	<revnumber>3.3</revnumber>
 	<date>2012-01-11</date>
 	<authorinitials>hv</authorinitials>
diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
index 36660d3..505f020 100644
--- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
@@ -215,11 +215,12 @@ the array to zero.</entry>
 
     <table pgwide="1" frame="none" id="v4l2-querymenu">
       <title>struct <structname>v4l2_querymenu</structname></title>
-      <tgroup cols="3">
+      <tgroup cols="4">
 	&cs-str;
 	<tbody valign="top">
 	  <row>
 	    <entry>__u32</entry>
+	    <entry></entry>
 	    <entry><structfield>id</structfield></entry>
 	    <entry>Identifies the control, set by the application
 from the respective &v4l2-queryctrl;
@@ -227,18 +228,38 @@ from the respective &v4l2-queryctrl;
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
+	    <entry></entry>
 	    <entry><structfield>index</structfield></entry>
 	    <entry>Index of the menu item, starting at zero, set by
 	    the application.</entry>
 	  </row>
 	  <row>
+	    <entry>union</entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
+	  <row>
+	    <entry></entry>
 	    <entry>__u8</entry>
 	    <entry><structfield>name</structfield>[32]</entry>
 	    <entry>Name of the menu item, a NUL-terminated ASCII
-string. This information is intended for the user.</entry>
+string. This information is intended for the user. This field is valid
+for <constant>V4L2_CTRL_FLAG_MENU</constant> type controls.</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>__s64</entry>
+	    <entry><structfield>value</structfield></entry>
+	    <entry>
+              Value of the integer menu item. This field is valid for
+              <constant>V4L2_CTRL_FLAG_INTEGER_MENU</constant> type
+              controls.
+            </entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
+	    <entry></entry>
 	    <entry><structfield>reserved</structfield></entry>
 	    <entry>Reserved for future extensions. Drivers must set
 the array to zero.</entry>
@@ -292,6 +313,20 @@ the menu items can be enumerated with the
 <constant>VIDIOC_QUERYMENU</constant> ioctl.</entry>
 	  </row>
 	  <row>
+	    <entry><constant>V4L2_CTRL_TYPE_INTEGER_MENU</constant></entry>
+	    <entry>&ge; 0</entry>
+	    <entry>1</entry>
+	    <entry>N-1</entry>
+	    <entry>
+              The control has a menu of N choices. The values of the
+              menu items can be enumerated with the
+              <constant>VIDIOC_QUERYMENU</constant> ioctl. This is
+              similar to <constant>V4L2_CTRL_TYPE_MENU</constant>
+              except that instead of strings, the menu items are
+              signed 64-bit integers.
+            </entry>
+	  </row>
+	  <row>
 	    <entry><constant>V4L2_CTRL_TYPE_BITMASK</constant></entry>
 	    <entry>0</entry>
 	    <entry>n/a</entry>
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 03/35] vivi: Add an integer menu test control
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 01/35] v4l: Introduce integer menu controls Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 02/35] v4l: Document " Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 04/35] v4l: VIDIOC_SUBDEV_S_SELECTION and VIDIOC_SUBDEV_G_SELECTION IOCTLs Sakari Ailus
                   ` (31 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add an integer menu test control for the vivi driver.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/vivi.c |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 5e8b071..d75a1e4 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -177,6 +177,7 @@ struct vivi_dev {
 	struct v4l2_ctrl	   *menu;
 	struct v4l2_ctrl	   *string;
 	struct v4l2_ctrl	   *bitmask;
+	struct v4l2_ctrl	   *int_menu;
 
 	spinlock_t                 slock;
 	struct mutex		   mutex;
@@ -503,6 +504,10 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 			dev->boolean->cur.val,
 			dev->menu->qmenu[dev->menu->cur.val],
 			dev->string->cur.string);
+	snprintf(str, sizeof(str), " integer_menu %lld, value %d ",
+			dev->int_menu->qmenu_int[dev->int_menu->cur.val],
+			dev->int_menu->cur.val);
+	gen_text(dev, vbuf, line++ * 16, 16, str);
 	mutex_unlock(&dev->ctrl_handler.lock);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
 	if (dev->button_pressed) {
@@ -1165,6 +1170,22 @@ static const struct v4l2_ctrl_config vivi_ctrl_bitmask = {
 	.step = 0,
 };
 
+static const s64 vivi_ctrl_int_menu_values[] = {
+	1, 1, 2, 3, 5, 8, 13, 21, 42,
+};
+
+static const struct v4l2_ctrl_config vivi_ctrl_int_menu = {
+	.ops = &vivi_ctrl_ops,
+	.id = VIVI_CID_CUSTOM_BASE + 7,
+	.name = "Integer menu",
+	.type = V4L2_CTRL_TYPE_INTEGER_MENU,
+	.min = 1,
+	.max = 8,
+	.def = 4,
+	.menu_skip_mask = 0x02,
+	.qmenu_int = vivi_ctrl_int_menu_values,
+};
+
 static const struct v4l2_file_operations vivi_fops = {
 	.owner		= THIS_MODULE,
 	.open           = v4l2_fh_open,
@@ -1275,6 +1296,7 @@ static int __init vivi_create_instance(int inst)
 	dev->menu = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_menu, NULL);
 	dev->string = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_string, NULL);
 	dev->bitmask = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_bitmask, NULL);
+	dev->int_menu = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int_menu, NULL);
 	if (hdl->error) {
 		ret = hdl->error;
 		goto unreg_dev;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 04/35] v4l: VIDIOC_SUBDEV_S_SELECTION and VIDIOC_SUBDEV_G_SELECTION IOCTLs
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (2 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 03/35] vivi: Add an integer menu test control Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 05/35] v4l: vdev_to_v4l2_subdev() should have return type "struct v4l2_subdev *" Sakari Ailus
                   ` (30 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add support for VIDIOC_SUBDEV_S_SELECTION and VIDIOC_SUBDEV_G_SELECTION
IOCTLs. They replace functionality provided by VIDIOC_SUBDEV_S_CROP and
VIDIOC_SUBDEV_G_CROP IOCTLs and also add new functionality (composing).

VIDIOC_SUBDEV_G_CROP and VIDIOC_SUBDEV_S_CROP continue to be supported.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/v4l2-subdev.c |   42 ++++++++++++++++++++++++++++--------
 include/linux/v4l2-subdev.h       |   41 ++++++++++++++++++++++++++++++++++++
 include/media/v4l2-subdev.h       |   21 +++++++++++++++---
 3 files changed, 90 insertions(+), 14 deletions(-)

diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index 6fe88e9..7d22538 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -35,14 +35,9 @@
 static int subdev_fh_init(struct v4l2_subdev_fh *fh, struct v4l2_subdev *sd)
 {
 #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
-	/* Allocate try format and crop in the same memory block */
-	fh->try_fmt = kzalloc((sizeof(*fh->try_fmt) + sizeof(*fh->try_crop))
-			      * sd->entity.num_pads, GFP_KERNEL);
-	if (fh->try_fmt == NULL)
+	fh->pad = kzalloc(sizeof(*fh->pad) * sd->entity.num_pads, GFP_KERNEL);
+	if (fh->pad == NULL)
 		return -ENOMEM;
-
-	fh->try_crop = (struct v4l2_rect *)
-		(fh->try_fmt + sd->entity.num_pads);
 #endif
 	return 0;
 }
@@ -50,9 +45,8 @@ static int subdev_fh_init(struct v4l2_subdev_fh *fh, struct v4l2_subdev *sd)
 static void subdev_fh_free(struct v4l2_subdev_fh *fh)
 {
 #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
-	kfree(fh->try_fmt);
-	fh->try_fmt = NULL;
-	fh->try_crop = NULL;
+	kfree(fh->pad);
+	fh->pad = NULL;
 #endif
 }
 
@@ -293,6 +287,34 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		return v4l2_subdev_call(sd, pad, enum_frame_interval, subdev_fh,
 					fie);
 	}
+
+	case VIDIOC_SUBDEV_G_SELECTION: {
+		struct v4l2_subdev_selection *sel = arg;
+
+		if (sel->which != V4L2_SUBDEV_FORMAT_TRY &&
+		    sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+			return -EINVAL;
+
+		if (sel->pad >= sd->entity.num_pads)
+			return -EINVAL;
+
+		return v4l2_subdev_call(
+			sd, pad, get_selection, subdev_fh, sel);
+	}
+
+	case VIDIOC_SUBDEV_S_SELECTION: {
+		struct v4l2_subdev_selection *sel = arg;
+
+		if (sel->which != V4L2_SUBDEV_FORMAT_TRY &&
+		    sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+			return -EINVAL;
+
+		if (sel->pad >= sd->entity.num_pads)
+			return -EINVAL;
+
+		return v4l2_subdev_call(
+			sd, pad, set_selection, subdev_fh, sel);
+	}
 #endif
 	default:
 		return v4l2_subdev_call(sd, core, ioctl, cmd, arg);
diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h
index ed29cbb..4c63e51 100644
--- a/include/linux/v4l2-subdev.h
+++ b/include/linux/v4l2-subdev.h
@@ -123,6 +123,43 @@ struct v4l2_subdev_frame_interval_enum {
 	__u32 reserved[9];
 };
 
+#define V4L2_SUBDEV_SEL_FLAG_SIZE_GE			(1 << 0)
+#define V4L2_SUBDEV_SEL_FLAG_SIZE_LE			(1 << 1)
+#define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG		(1 << 2)
+
+/* active cropping area */
+#define V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE			0x0000
+/* cropping bounds */
+#define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS			0x0002
+/* current composing area */
+#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE		0x0100
+/* composing bounds */
+#define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS		0x0102
+
+
+/**
+ * struct v4l2_subdev_selection - selection info
+ *
+ * @which: either V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY
+ * @pad: pad number, as reported by the media API
+ * @target: selection target, used to choose one of possible rectangles
+ * @flags: constraint flags
+ * @r: coordinates of the selection window
+ * @reserved: for future use, set to zero for now
+ *
+ * Hardware may use multiple helper windows to process a video stream.
+ * The structure is used to exchange this selection areas between
+ * an application and a driver.
+ */
+struct v4l2_subdev_selection {
+	__u32 which;
+	__u32 pad;
+	__u32 target;
+	__u32 flags;
+	struct v4l2_rect r;
+	__u32 reserved[8];
+};
+
 #define VIDIOC_SUBDEV_G_FMT	_IOWR('V',  4, struct v4l2_subdev_format)
 #define VIDIOC_SUBDEV_S_FMT	_IOWR('V',  5, struct v4l2_subdev_format)
 #define VIDIOC_SUBDEV_G_FRAME_INTERVAL \
@@ -137,5 +174,9 @@ struct v4l2_subdev_frame_interval_enum {
 			_IOWR('V', 75, struct v4l2_subdev_frame_interval_enum)
 #define VIDIOC_SUBDEV_G_CROP	_IOWR('V', 59, struct v4l2_subdev_crop)
 #define VIDIOC_SUBDEV_S_CROP	_IOWR('V', 60, struct v4l2_subdev_crop)
+#define VIDIOC_SUBDEV_G_SELECTION \
+	_IOWR('V', 61, struct v4l2_subdev_selection)
+#define VIDIOC_SUBDEV_S_SELECTION \
+	_IOWR('V', 62, struct v4l2_subdev_selection)
 
 #endif
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index f0f3358..feab950 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -466,6 +466,10 @@ struct v4l2_subdev_pad_ops {
 		       struct v4l2_subdev_crop *crop);
 	int (*get_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 		       struct v4l2_subdev_crop *crop);
+	int (*get_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_selection *sel);
+	int (*set_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_selection *sel);
 };
 
 struct v4l2_subdev_ops {
@@ -549,8 +553,11 @@ struct v4l2_subdev {
 struct v4l2_subdev_fh {
 	struct v4l2_fh vfh;
 #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
-	struct v4l2_mbus_framefmt *try_fmt;
-	struct v4l2_rect *try_crop;
+	struct {
+		struct v4l2_mbus_framefmt try_fmt;
+		struct v4l2_rect try_crop;
+		struct v4l2_rect try_compose;
+	} *pad;
 #endif
 };
 
@@ -561,13 +568,19 @@ struct v4l2_subdev_fh {
 static inline struct v4l2_mbus_framefmt *
 v4l2_subdev_get_try_format(struct v4l2_subdev_fh *fh, unsigned int pad)
 {
-	return &fh->try_fmt[pad];
+	return &fh->pad[pad].try_fmt;
 }
 
 static inline struct v4l2_rect *
 v4l2_subdev_get_try_crop(struct v4l2_subdev_fh *fh, unsigned int pad)
 {
-	return &fh->try_crop[pad];
+	return &fh->pad[pad].try_crop;
+}
+
+static inline struct v4l2_rect *
+v4l2_subdev_get_try_compose(struct v4l2_subdev_fh *fh, unsigned int pad)
+{
+	return &fh->pad[pad].try_compose;
 }
 #endif
 
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 05/35] v4l: vdev_to_v4l2_subdev() should have return type "struct v4l2_subdev *"
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (3 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 04/35] v4l: VIDIOC_SUBDEV_S_SELECTION and VIDIOC_SUBDEV_G_SELECTION IOCTLs Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 06/35] v4l: Check pad number in get try pointer functions Sakari Ailus
                   ` (29 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

vdev_to_v4l2_subdev() should return struct v4l2_subdev *, not void *. Fix
this.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 include/media/v4l2-subdev.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index feab950..bcaf6b8 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -545,7 +545,7 @@ struct v4l2_subdev {
 #define media_entity_to_v4l2_subdev(ent) \
 	container_of(ent, struct v4l2_subdev, entity)
 #define vdev_to_v4l2_subdev(vdev) \
-	video_get_drvdata(vdev)
+	((struct v4l2_subdev *)video_get_drvdata(vdev))
 
 /*
  * Used for storing subdev information per file handle
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 06/35] v4l: Check pad number in get try pointer functions
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (4 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 05/35] v4l: vdev_to_v4l2_subdev() should have return type "struct v4l2_subdev *" Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 07/35] v4l: Support s_crop and g_crop through s/g_selection Sakari Ailus
                   ` (28 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Unify functions to get try pointers and validate the pad number accessed by
the user.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 include/media/v4l2-subdev.h |   30 +++++++++++++-----------------
 1 files changed, 13 insertions(+), 17 deletions(-)

diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index bcaf6b8..7e85035 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -565,23 +565,19 @@ struct v4l2_subdev_fh {
 	container_of(fh, struct v4l2_subdev_fh, vfh)
 
 #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
-static inline struct v4l2_mbus_framefmt *
-v4l2_subdev_get_try_format(struct v4l2_subdev_fh *fh, unsigned int pad)
-{
-	return &fh->pad[pad].try_fmt;
-}
-
-static inline struct v4l2_rect *
-v4l2_subdev_get_try_crop(struct v4l2_subdev_fh *fh, unsigned int pad)
-{
-	return &fh->pad[pad].try_crop;
-}
-
-static inline struct v4l2_rect *
-v4l2_subdev_get_try_compose(struct v4l2_subdev_fh *fh, unsigned int pad)
-{
-	return &fh->pad[pad].try_compose;
-}
+#define __V4L2_SUBDEV_MK_GET_TRY(rtype, fun_name, field_name)		\
+	static inline struct rtype *					\
+	v4l2_subdev_get_try_##fun_name(struct v4l2_subdev_fh *fh,	\
+				       unsigned int pad)		\
+	{								\
+		BUG_ON(unlikely(pad >= vdev_to_v4l2_subdev(		\
+					fh->vfh.vdev)->entity.num_pads)); \
+		return &fh->pad[pad].field_name;			\
+	}
+
+__V4L2_SUBDEV_MK_GET_TRY(v4l2_mbus_framefmt, format, try_fmt)
+__V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, crop, try_compose)
+__V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, compose, try_compose)
 #endif
 
 extern const struct v4l2_file_operations v4l2_subdev_fops;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 07/35] v4l: Support s_crop and g_crop through s/g_selection
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (5 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 06/35] v4l: Check pad number in get try pointer functions Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 08/35] v4l: Add subdev selections documentation: svg and dia files Sakari Ailus
                   ` (27 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Fall back to s_selection if s_crop isn't implemented by a driver. Same for
g_selection / g_crop.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/v4l2-subdev.c |   37 +++++++++++++++++++++++++++++++++++--
 1 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index 7d22538..eda34cd 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -228,6 +228,8 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 	case VIDIOC_SUBDEV_G_CROP: {
 		struct v4l2_subdev_crop *crop = arg;
+		struct v4l2_subdev_selection sel;
+		int rval;
 
 		if (crop->which != V4L2_SUBDEV_FORMAT_TRY &&
 		    crop->which != V4L2_SUBDEV_FORMAT_ACTIVE)
@@ -236,11 +238,27 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		if (crop->pad >= sd->entity.num_pads)
 			return -EINVAL;
 
-		return v4l2_subdev_call(sd, pad, get_crop, subdev_fh, crop);
+		rval = v4l2_subdev_call(sd, pad, get_crop, subdev_fh, crop);
+		if (rval != -ENOIOCTLCMD)
+			return rval;
+
+		memset(&sel, 0, sizeof(sel));
+		sel.which = crop->which;
+		sel.pad = crop->pad;
+		sel.target = V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE;
+
+		rval = v4l2_subdev_call(
+			sd, pad, get_selection, subdev_fh, &sel);
+
+		crop->rect = sel.r;
+
+		return rval;
 	}
 
 	case VIDIOC_SUBDEV_S_CROP: {
 		struct v4l2_subdev_crop *crop = arg;
+		struct v4l2_subdev_selection sel;
+		int rval;
 
 		if (crop->which != V4L2_SUBDEV_FORMAT_TRY &&
 		    crop->which != V4L2_SUBDEV_FORMAT_ACTIVE)
@@ -249,7 +267,22 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		if (crop->pad >= sd->entity.num_pads)
 			return -EINVAL;
 
-		return v4l2_subdev_call(sd, pad, set_crop, subdev_fh, crop);
+		rval = v4l2_subdev_call(sd, pad, set_crop, subdev_fh, crop);
+		if (rval != -ENOIOCTLCMD)
+			return rval;
+
+		memset(&sel, 0, sizeof(sel));
+		sel.which = crop->which;
+		sel.pad = crop->pad;
+		sel.target = V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE;
+		sel.r = crop->rect;
+
+		rval = v4l2_subdev_call(
+			sd, pad, set_selection, subdev_fh, &sel);
+
+		crop->rect = sel.r;
+
+		return rval;
 	}
 
 	case VIDIOC_SUBDEV_ENUM_MBUS_CODE: {
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 08/35] v4l: Add subdev selections documentation: svg and dia files
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (6 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 07/35] v4l: Support s_crop and g_crop through s/g_selection Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:42   ` Laurent Pinchart
  2012-03-06 16:32 ` [PATCH v5 09/35] v4l: Add subdev selections documentation Sakari Ailus
                   ` (26 subsequent siblings)
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add svga and dia files for V4L2 subdev selections documentation.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 .../media/v4l/subdev-image-processing-crop.dia     |  614 ++++++++
 .../media/v4l/subdev-image-processing-crop.svg     |   63 +
 .../media/v4l/subdev-image-processing-full.dia     | 1588 ++++++++++++++++++++
 .../media/v4l/subdev-image-processing-full.svg     |  163 ++
 ...ubdev-image-processing-scaling-multi-source.dia | 1152 ++++++++++++++
 ...ubdev-image-processing-scaling-multi-source.svg |  116 ++
 6 files changed, 3696 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/DocBook/media/v4l/subdev-image-processing-crop.dia
 create mode 100644 Documentation/DocBook/media/v4l/subdev-image-processing-crop.svg
 create mode 100644 Documentation/DocBook/media/v4l/subdev-image-processing-full.dia
 create mode 100644 Documentation/DocBook/media/v4l/subdev-image-processing-full.svg
 create mode 100644 Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.dia
 create mode 100644 Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.svg

diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-crop.dia b/Documentation/DocBook/media/v4l/subdev-image-processing-crop.dia
new file mode 100644
index 0000000..e32ba53
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/subdev-image-processing-crop.dia
@@ -0,0 +1,614 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<dia:diagram xmlns:dia="http://www.lysator.liu.se/~alla/dia/">
+  <dia:diagramdata>
+    <dia:attribute name="background">
+      <dia:color val="#ffffff"/>
+    </dia:attribute>
+    <dia:attribute name="pagebreak">
+      <dia:color val="#000099"/>
+    </dia:attribute>
+    <dia:attribute name="paper">
+      <dia:composite type="paper">
+        <dia:attribute name="name">
+          <dia:string>#A4#</dia:string>
+        </dia:attribute>
+        <dia:attribute name="tmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="bmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="lmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="rmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="is_portrait">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+        <dia:attribute name="scaling">
+          <dia:real val="0.49000000953674316"/>
+        </dia:attribute>
+        <dia:attribute name="fitto">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="grid">
+      <dia:composite type="grid">
+        <dia:attribute name="width_x">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="width_y">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_x">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_y">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:composite type="color"/>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="color">
+      <dia:color val="#d8e5e5"/>
+    </dia:attribute>
+    <dia:attribute name="guides">
+      <dia:composite type="guides">
+        <dia:attribute name="hguides"/>
+        <dia:attribute name="vguides"/>
+      </dia:composite>
+    </dia:attribute>
+  </dia:diagramdata>
+  <dia:layer name="Background" visible="true" active="true">
+    <dia:object type="Standard - Box" version="0" id="O0">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-0.4,6.5"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-0.45,6.45;23.1387,16.2"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="-0.4,6.5"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="23.48871579904775"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="9.6500000000000004"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O1">
+      <dia:attribute name="obj_pos">
+        <dia:point val="0.225,9.45"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="0.175,9.4;8.225,14.7"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="0.225,9.45"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="7.9499999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="5.1999999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#a52a2a"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O2">
+      <dia:attribute name="obj_pos">
+        <dia:point val="3.175,10.55"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="3.125,10.5;7.925,14.45"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="3.175,10.55"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="4.6999999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.8499999999999979"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#0000ff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O3">
+      <dia:attribute name="obj_pos">
+        <dia:point val="3.725,11.3875"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="3.725,10.7925;6.6025,13.14"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink
+crop
+selection#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="3.725,11.3875"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#0000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O4">
+      <dia:attribute name="obj_pos">
+        <dia:point val="1.475,7.9"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="1.475,7.305;1.475,8.0525"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>##</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="1.475,7.9"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O5">
+      <dia:attribute name="obj_pos">
+        <dia:point val="0.426918,7.89569"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="0.426918,7.30069;3.90942,8.84819"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink media
+bus format#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="0.426918,7.89569"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#a52a2a"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O6">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.4887,7.75"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.4887,7.155;21.8112,8.7025"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#source media
+bus format#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="17.4887,7.75"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#8b6914"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O7">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.5244,9.5417"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.4744,9.4917;22.2387,13.35"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="17.5244,9.5417"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="4.6643157990477508"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.758300000000002"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#8b6914"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O8">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.5244,13.3"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="3.12132,13.2463;17.5781,14.4537"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="17.5244,13.3"/>
+        <dia:point val="3.175,14.4"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O7" connection="5"/>
+        <dia:connection handle="1" to="O2" connection="5"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O9">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.5244,9.5417"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="3.12162,9.48832;17.5778,10.6034"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="17.5244,9.5417"/>
+        <dia:point val="3.175,10.55"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O7" connection="0"/>
+        <dia:connection handle="1" to="O2" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O10">
+      <dia:attribute name="obj_pos">
+        <dia:point val="22.1887,13.3"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="7.82132,13.2463;22.2424,14.4537"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="22.1887,13.3"/>
+        <dia:point val="7.875,14.4"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O7" connection="7"/>
+        <dia:connection handle="1" to="O2" connection="7"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O11">
+      <dia:attribute name="obj_pos">
+        <dia:point val="22.1887,9.5417"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="7.82161,9.48831;22.2421,10.6034"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="22.1887,9.5417"/>
+        <dia:point val="7.875,10.55"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O7" connection="2"/>
+        <dia:connection handle="1" to="O2" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O12">
+      <dia:attribute name="obj_pos">
+        <dia:point val="23.23,10.5742"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="23.18,10.5242;24.13,11.4742"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="23.23,10.5742"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O13">
+      <dia:attribute name="obj_pos">
+        <dia:point val="24.08,10.9992"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="24.03,10.6388;32.4953,11.3624"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="24.08,10.9992"/>
+        <dia:point val="32.3835,11.0007"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O12" connection="3"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O14">
+      <dia:attribute name="obj_pos">
+        <dia:point val="25.3454,10.49"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.3454,9.895;29.9904,10.6425"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 1 (source)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="25.3454,10.49"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O15">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-1.44491,11.6506"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-1.49491,11.6006;-0.54491,12.5506"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="-1.44491,11.6506"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O16">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-9.61991,12.09"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-9.67,11.7149;-1.33311,12.4385"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="-9.61991,12.09"/>
+        <dia:point val="-1.44491,12.0756"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O15" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O17">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-7.39291,11.49"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-7.39291,10.895;-3.58791,11.6425"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 0 (sink)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="-7.39291,11.49"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+  </dia:layer>
+</dia:diagram>
diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-crop.svg b/Documentation/DocBook/media/v4l/subdev-image-processing-crop.svg
new file mode 100644
index 0000000..18b0f5d
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/subdev-image-processing-crop.svg
@@ -0,0 +1,63 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd">
+<svg width="43cm" height="10cm" viewBox="-194 128 844 196" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+  <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="-8" y="130" width="469.774" height="193"/>
+  <g>
+    <rect style="fill: #ffffff" x="4.5" y="189" width="159" height="104"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a52a2a" x="4.5" y="189" width="159" height="104"/>
+  </g>
+  <g>
+    <rect style="fill: #ffffff" x="63.5" y="211" width="94" height="77"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x="63.5" y="211" width="94" height="77"/>
+  </g>
+  <text style="fill: #0000ff;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="74.5" y="227.75">
+    <tspan x="74.5" y="227.75">sink</tspan>
+    <tspan x="74.5" y="243.75">crop</tspan>
+    <tspan x="74.5" y="259.75">selection</tspan>
+  </text>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="29.5" y="158">
+    <tspan x="29.5" y="158"></tspan>
+  </text>
+  <text style="fill: #a52a2a;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="8.53836" y="157.914">
+    <tspan x="8.53836" y="157.914">sink media</tspan>
+    <tspan x="8.53836" y="173.914">bus format</tspan>
+  </text>
+  <text style="fill: #8b6914;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="349.774" y="155">
+    <tspan x="349.774" y="155">source media</tspan>
+    <tspan x="349.774" y="171">bus format</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="350.488" y="190.834" width="93.2863" height="75.166"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="350.488" y="190.834" width="93.2863" height="75.166"/>
+  </g>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="350.488" y1="266" x2="63.5" y2="288"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="350.488" y1="190.834" x2="63.5" y2="211"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="443.774" y1="266" x2="157.5" y2="288"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="443.774" y1="190.834" x2="157.5" y2="211"/>
+  <g>
+    <ellipse style="fill: #ffffff" cx="473.1" cy="219.984" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="473.1" cy="219.984" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="473.1" cy="219.984" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="481.6" y1="219.984" x2="637.934" y2="220.012"/>
+    <polygon style="fill: #000000" points="645.434,220.014 635.433,225.012 637.934,220.012 635.435,215.012 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="645.434,220.014 635.433,225.012 637.934,220.012 635.435,215.012 "/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="506.908" y="209.8">
+    <tspan x="506.908" y="209.8">pad 1 (source)</tspan>
+  </text>
+  <g>
+    <ellipse style="fill: #ffffff" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="-192.398" y1="241.8" x2="-38.6343" y2="241.529"/>
+    <polygon style="fill: #000000" points="-31.1343,241.516 -41.1254,246.534 -38.6343,241.529 -41.1431,236.534 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-31.1343,241.516 -41.1254,246.534 -38.6343,241.529 -41.1431,236.534 "/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="-147.858" y="229.8">
+    <tspan x="-147.858" y="229.8">pad 0 (sink)</tspan>
+  </text>
+</svg>
diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-full.dia b/Documentation/DocBook/media/v4l/subdev-image-processing-full.dia
new file mode 100644
index 0000000..a0d7829
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/subdev-image-processing-full.dia
@@ -0,0 +1,1588 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<dia:diagram xmlns:dia="http://www.lysator.liu.se/~alla/dia/">
+  <dia:diagramdata>
+    <dia:attribute name="background">
+      <dia:color val="#ffffff"/>
+    </dia:attribute>
+    <dia:attribute name="pagebreak">
+      <dia:color val="#000099"/>
+    </dia:attribute>
+    <dia:attribute name="paper">
+      <dia:composite type="paper">
+        <dia:attribute name="name">
+          <dia:string>#A4#</dia:string>
+        </dia:attribute>
+        <dia:attribute name="tmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="bmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="lmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="rmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="is_portrait">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+        <dia:attribute name="scaling">
+          <dia:real val="0.49000000953674316"/>
+        </dia:attribute>
+        <dia:attribute name="fitto">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="grid">
+      <dia:composite type="grid">
+        <dia:attribute name="width_x">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="width_y">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_x">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_y">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:composite type="color"/>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="color">
+      <dia:color val="#d8e5e5"/>
+    </dia:attribute>
+    <dia:attribute name="guides">
+      <dia:composite type="guides">
+        <dia:attribute name="hguides"/>
+        <dia:attribute name="vguides"/>
+      </dia:composite>
+    </dia:attribute>
+  </dia:diagramdata>
+  <dia:layer name="Background" visible="true" active="true">
+    <dia:object type="Standard - Box" version="0" id="O0">
+      <dia:attribute name="obj_pos">
+        <dia:point val="15.945,6.45"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="15.895,6.4;26.4,18.95"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="15.945,6.45"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="10.404999999254942"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="12.449999999999992"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#ff765a"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O1">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-0.1,3.65"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-0.15,3.6;40.25,20.85"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="-0.1,3.65"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="40.300000000000004"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="17.149999999999999"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O2">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-1.05,7.9106"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-1.1,7.8606;-0.15,8.8106"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="-1.05,7.9106"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O3">
+      <dia:attribute name="obj_pos">
+        <dia:point val="40.3366,9.8342"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="40.2866,9.7842;41.2366,10.7342"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="40.3366,9.8342"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O4">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-9.225,8.35"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-9.27509,7.97487;-0.938197,8.69848"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="-9.225,8.35"/>
+        <dia:point val="-1.05,8.3356"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O2" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O5">
+      <dia:attribute name="obj_pos">
+        <dia:point val="41.1866,10.2592"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="41.1366,9.89879;49.6019,10.6224"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="41.1866,10.2592"/>
+        <dia:point val="49.4901,10.2607"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O3" connection="3"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O6">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-6.998,7.75"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-6.998,7.155;-3.193,7.9025"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 0 (sink)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="-6.998,7.75"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O7">
+      <dia:attribute name="obj_pos">
+        <dia:point val="42.452,9.75"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="42.452,9.155;47.097,9.9025"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 2 (source)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="42.452,9.75"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O8">
+      <dia:attribute name="obj_pos">
+        <dia:point val="0.275,6"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="0.225,5.95;8.275,11.25"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="0.275,6"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="7.9499999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="5.1999999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#a52a2a"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O9">
+      <dia:attribute name="obj_pos">
+        <dia:point val="3.125,6.8"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="3.075,6.75;7.875,10.7"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="3.125,6.8"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="4.6999999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.8499999999999979"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#0000ff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O10">
+      <dia:attribute name="obj_pos">
+        <dia:point val="1.525,4.45"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="1.525,3.855;1.525,4.6025"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>##</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="1.525,4.45"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O11">
+      <dia:attribute name="obj_pos">
+        <dia:point val="0.476918,4.44569"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="0.476918,3.85069;3.95942,5.39819"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink media
+bus format#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="0.476918,4.44569"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#a52a2a"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O12">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.6822,9.28251"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="16.6322,9.23251;24.9922,17.9564"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="16.6822,9.28251"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="8.2600228398861297"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="8.6238900617957164"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#00ff00"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O13">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.6822,17.9064"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="3.05732,10.5823;16.7499,17.9741"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="16.6822,17.9064"/>
+        <dia:point val="3.125,10.65"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O12" connection="5"/>
+        <dia:connection handle="1" to="O9" connection="5"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O14">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.6822,9.28251"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="3.06681,6.74181;16.7404,9.3407"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="16.6822,9.28251"/>
+        <dia:point val="3.125,6.8"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O12" connection="0"/>
+        <dia:connection handle="1" to="O9" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O15">
+      <dia:attribute name="obj_pos">
+        <dia:point val="24.9422,17.9064"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="7.75945,10.5845;25.0077,17.9719"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="24.9422,17.9064"/>
+        <dia:point val="7.825,10.65"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O12" connection="7"/>
+        <dia:connection handle="1" to="O9" connection="7"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O16">
+      <dia:attribute name="obj_pos">
+        <dia:point val="24.9422,9.28251"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="7.76834,6.74334;24.9989,9.33917"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="24.9422,9.28251"/>
+        <dia:point val="7.825,6.8"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O12" connection="2"/>
+        <dia:connection handle="1" to="O9" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O17">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.7352,7.47209"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="16.7352,6.87709;22.5602,8.42459"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink compose
+selection (scaling)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="16.7352,7.47209"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#00ff00"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O18">
+      <dia:attribute name="obj_pos">
+        <dia:point val="20.4661,9.72825"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="20.4161,9.67825;25.5254,13.3509"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="20.4661,9.72825"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="5.009308462554376"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.5726155970598077"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#a020f0"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O19">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.475,5.2564"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="34.475,4.6614;38.7975,6.2089"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#source media
+bus format#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="34.475,5.2564"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#8b6914"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O20">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.4244,8.6917"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="34.3744,8.6417;39.4837,12.3143"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="34.4244,8.6917"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="5.009308462554376"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.5726155970598077"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#8b6914"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O21">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.4244,12.2643"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="20.4125,12.2107;34.478,13.3545"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="34.4244,12.2643"/>
+        <dia:point val="20.4661,13.3009"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O20" connection="5"/>
+        <dia:connection handle="1" to="O18" connection="5"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O22">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.4244,8.6917"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="20.4125,8.63813;34.478,9.78182"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="34.4244,8.6917"/>
+        <dia:point val="20.4661,9.72825"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O20" connection="0"/>
+        <dia:connection handle="1" to="O18" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O23">
+      <dia:attribute name="obj_pos">
+        <dia:point val="39.4337,12.2643"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.4218,12.2107;39.4873,13.3545"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="39.4337,12.2643"/>
+        <dia:point val="25.4754,13.3009"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O20" connection="7"/>
+        <dia:connection handle="1" to="O18" connection="7"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O24">
+      <dia:attribute name="obj_pos">
+        <dia:point val="39.4337,8.6917"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.4218,8.63813;39.4873,9.78182"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="39.4337,8.6917"/>
+        <dia:point val="25.4754,9.72825"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O20" connection="2"/>
+        <dia:connection handle="1" to="O18" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O25">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.25,5.15"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="16.25,4.555;21.68,6.1025"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink compose
+bounds selection#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="16.25,5.15"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#ff765a"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O26">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-1.02991,16.6506"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-1.07991,16.6006;-0.12991,17.5506"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="-1.02991,16.6506"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O27">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-9.20491,17.09"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-9.255,16.7149;-0.918107,17.4385"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="-9.20491,17.09"/>
+        <dia:point val="-1.02991,17.0756"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O26" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O28">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-6.95,16.45"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-6.95,15.855;-3.145,16.6025"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 1 (sink)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="-6.95,16.45"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O29">
+      <dia:attribute name="obj_pos">
+        <dia:point val="0.390412,14.64"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="0.340412,14.59;6.045,18.8"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="0.390412,14.64"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="5.604587512785236"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="4.1099999999999994"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#a52a2a"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O30">
+      <dia:attribute name="obj_pos">
+        <dia:point val="2.645,15.74"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="2.595,15.69;5.6,18.3"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="2.645,15.74"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="2.904999999254942"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="2.5100000000000016"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#0000ff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O31">
+      <dia:attribute name="obj_pos">
+        <dia:point val="1.595,12.99"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="1.595,12.395;1.595,13.1425"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>##</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="1.595,12.99"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O32">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.945,12.595"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="2.58596,12.536;18.004,15.799"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="17.945,12.595"/>
+        <dia:point val="2.645,15.74"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O36" connection="0"/>
+        <dia:connection handle="1" to="O30" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O33">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.945,15.8"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="2.58772,15.7427;18.0023,18.3073"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="17.945,15.8"/>
+        <dia:point val="2.645,18.25"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O36" connection="5"/>
+        <dia:connection handle="1" to="O30" connection="5"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O34">
+      <dia:attribute name="obj_pos">
+        <dia:point val="21.7,15.8"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="5.49307,15.7431;21.7569,18.3069"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="21.7,15.8"/>
+        <dia:point val="5.55,18.25"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O36" connection="7"/>
+        <dia:connection handle="1" to="O30" connection="7"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O35">
+      <dia:attribute name="obj_pos">
+        <dia:point val="21.7,12.595"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="5.49136,12.5364;21.7586,15.7986"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="21.7,12.595"/>
+        <dia:point val="5.55,15.74"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O36" connection="2"/>
+        <dia:connection handle="1" to="O30" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O36">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.945,12.595"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.895,12.545;21.75,15.85"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="17.945,12.595"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="3.7549999992549452"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.2049999992549427"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#00ff00"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O37">
+      <dia:attribute name="obj_pos">
+        <dia:point val="22.1631,14.2233"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="22.1131,14.1733;25.45,16.7"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="22.1631,14.2233"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="3.2369000000000021"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="2.4267000000000003"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#a020f0"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O38">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.6714,16.2367"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="34.6214,16.1867;37.9,18.75"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="34.6714,16.2367"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="3.178600000000003"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="2.4632999999999967"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#8b6914"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O39">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.6714,18.7"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="22.1057,16.5926;34.7288,18.7574"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="34.6714,18.7"/>
+        <dia:point val="22.1631,16.65"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O38" connection="5"/>
+        <dia:connection handle="1" to="O37" connection="5"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O40">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.6714,16.2367"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="22.1058,14.166;34.7287,16.294"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="34.6714,16.2367"/>
+        <dia:point val="22.1631,14.2233"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O38" connection="0"/>
+        <dia:connection handle="1" to="O37" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O41">
+      <dia:attribute name="obj_pos">
+        <dia:point val="37.85,18.7"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.3425,16.5925;37.9075,18.7575"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="37.85,18.7"/>
+        <dia:point val="25.4,16.65"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O38" connection="7"/>
+        <dia:connection handle="1" to="O37" connection="7"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O42">
+      <dia:attribute name="obj_pos">
+        <dia:point val="37.85,16.2367"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.3427,14.166;37.9073,16.294"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="37.85,16.2367"/>
+        <dia:point val="25.4,14.2233"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O38" connection="2"/>
+        <dia:connection handle="1" to="O37" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O43">
+      <dia:attribute name="obj_pos">
+        <dia:point val="40.347,16.7742"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="40.297,16.7242;41.247,17.6742"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="40.347,16.7742"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O44">
+      <dia:attribute name="obj_pos">
+        <dia:point val="41.197,17.1992"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="41.147,16.8388;49.6123,17.5624"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="41.197,17.1992"/>
+        <dia:point val="49.5005,17.2007"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O43" connection="3"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O45">
+      <dia:attribute name="obj_pos">
+        <dia:point val="42.4624,16.69"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="42.4624,16.095;47.1074,16.8425"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 3 (source)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="42.4624,16.69"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O46">
+      <dia:attribute name="obj_pos">
+        <dia:point val="9.85,4.55"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="9.85,3.955;12.7275,6.3025"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink
+crop
+selection#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="9.85,4.55"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#0000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O47">
+      <dia:attribute name="obj_pos">
+        <dia:point val="27.65,4.75"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="27.65,4.155;30.5275,6.5025"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#source
+crop
+selection#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="27.65,4.75"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#a020f0"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O48">
+      <dia:attribute name="obj_pos">
+        <dia:point val="10.55,6.6"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="7.7135,6.39438;10.6035,7.11605"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="10.55,6.6"/>
+        <dia:point val="7.825,6.8"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#0000ff"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O9" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O49">
+      <dia:attribute name="obj_pos">
+        <dia:point val="10.45,6.55"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="5.48029,6.48236;10.5176,15.8387"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="10.45,6.55"/>
+        <dia:point val="5.55,15.74"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#0000ff"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O30" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O50">
+      <dia:attribute name="obj_pos">
+        <dia:point val="27.5246,6.66071"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.406,6.59136;27.594,9.82122"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="27.5246,6.66071"/>
+        <dia:point val="25.4754,9.72825"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#a020f0"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O18" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O51">
+      <dia:attribute name="obj_pos">
+        <dia:point val="27.5036,6.68935"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.2161,6.62775;27.5652,14.331"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="27.5036,6.68935"/>
+        <dia:point val="25.4,14.2233"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#a020f0"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O37" connection="2"/>
+      </dia:connections>
+    </dia:object>
+  </dia:layer>
+</dia:diagram>
diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-full.svg b/Documentation/DocBook/media/v4l/subdev-image-processing-full.svg
new file mode 100644
index 0000000..3322cf4
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/subdev-image-processing-full.svg
@@ -0,0 +1,163 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd">
+<svg width="59cm" height="18cm" viewBox="-186 71 1178 346" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+  <g>
+    <rect style="fill: #ffffff" x="318.9" y="129" width="208.1" height="249"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #ff765a" x="318.9" y="129" width="208.1" height="249"/>
+  </g>
+  <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="-2" y="73" width="806" height="343"/>
+  <g>
+    <ellipse style="fill: #ffffff" cx="-12.5" cy="166.712" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-12.5" cy="166.712" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-12.5" cy="166.712" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <ellipse style="fill: #ffffff" cx="815.232" cy="205.184" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="815.232" cy="205.184" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="815.232" cy="205.184" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="-184.5" y1="167" x2="-30.7361" y2="166.729"/>
+    <polygon style="fill: #000000" points="-23.2361,166.716 -33.2272,171.734 -30.7361,166.729 -33.2449,161.734 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-23.2361,166.716 -33.2272,171.734 -30.7361,166.729 -33.2449,161.734 "/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="823.732" y1="205.184" x2="980.066" y2="205.212"/>
+    <polygon style="fill: #000000" points="987.566,205.214 977.565,210.212 980.066,205.212 977.567,200.212 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="987.566,205.214 977.565,210.212 980.066,205.212 977.567,200.212 "/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="-139.96" y="155">
+    <tspan x="-139.96" y="155">pad 0 (sink)</tspan>
+  </text>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="849.04" y="195">
+    <tspan x="849.04" y="195">pad 2 (source)</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="5.5" y="120" width="159" height="104"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a52a2a" x="5.5" y="120" width="159" height="104"/>
+  </g>
+  <g>
+    <rect style="fill: #ffffff" x="62.5" y="136" width="94" height="77"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x="62.5" y="136" width="94" height="77"/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="30.5" y="89">
+    <tspan x="30.5" y="89"></tspan>
+  </text>
+  <text style="fill: #a52a2a;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="9.53836" y="88.9138">
+    <tspan x="9.53836" y="88.9138">sink media</tspan>
+    <tspan x="9.53836" y="104.914">bus format</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="333.644" y="185.65" width="165.2" height="172.478"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #00ff00" x="333.644" y="185.65" width="165.2" height="172.478"/>
+  </g>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="333.644" y1="358.128" x2="62.5" y2="213"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="333.644" y1="185.65" x2="62.5" y2="136"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="498.844" y1="358.128" x2="156.5" y2="213"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="498.844" y1="185.65" x2="156.5" y2="136"/>
+  <text style="fill: #00ff00;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="334.704" y="149.442">
+    <tspan x="334.704" y="149.442">sink compose</tspan>
+    <tspan x="334.704" y="165.442">selection (scaling)</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="409.322" y="194.565" width="100.186" height="71.4523"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x="409.322" y="194.565" width="100.186" height="71.4523"/>
+  </g>
+  <text style="fill: #8b6914;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="689.5" y="105.128">
+    <tspan x="689.5" y="105.128">source media</tspan>
+    <tspan x="689.5" y="121.128">bus format</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="688.488" y="173.834" width="100.186" height="71.4523"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="688.488" y="173.834" width="100.186" height="71.4523"/>
+  </g>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="688.488" y1="245.286" x2="409.322" y2="266.018"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="688.488" y1="173.834" x2="409.322" y2="194.565"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="788.674" y1="245.286" x2="509.508" y2="266.018"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="788.674" y1="173.834" x2="509.508" y2="194.565"/>
+  <text style="fill: #ff765a;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="325" y="103">
+    <tspan x="325" y="103">sink compose</tspan>
+    <tspan x="325" y="119">bounds selection</tspan>
+  </text>
+  <g>
+    <ellipse style="fill: #ffffff" cx="-12.0982" cy="341.512" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-12.0982" cy="341.512" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-12.0982" cy="341.512" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="-184.098" y1="341.8" x2="-30.3343" y2="341.529"/>
+    <polygon style="fill: #000000" points="-22.8343,341.516 -32.8254,346.534 -30.3343,341.529 -32.8431,336.534 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-22.8343,341.516 -32.8254,346.534 -30.3343,341.529 -32.8431,336.534 "/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="-139" y="329">
+    <tspan x="-139" y="329">pad 1 (sink)</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="7.80824" y="292.8" width="112.092" height="82.2"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a52a2a" x="7.80824" y="292.8" width="112.092" height="82.2"/>
+  </g>
+  <g>
+    <rect style="fill: #ffffff" x="52.9" y="314.8" width="58.1" height="50.2"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x="52.9" y="314.8" width="58.1" height="50.2"/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="31.9" y="259.8">
+    <tspan x="31.9" y="259.8"></tspan>
+  </text>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="358.9" y1="251.9" x2="52.9" y2="314.8"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="358.9" y1="316" x2="52.9" y2="365"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="434" y1="316" x2="111" y2="365"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="434" y1="251.9" x2="111" y2="314.8"/>
+  <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #00ff00" x="358.9" y="251.9" width="75.1" height="64.1"/>
+  <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x="443.262" y="284.466" width="64.738" height="48.534"/>
+  <g>
+    <rect style="fill: #ffffff" x="693.428" y="324.734" width="63.572" height="49.266"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="693.428" y="324.734" width="63.572" height="49.266"/>
+  </g>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="693.428" y1="374" x2="443.262" y2="333"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="693.428" y1="324.734" x2="443.262" y2="284.466"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="757" y1="374" x2="508" y2="333"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="757" y1="324.734" x2="508" y2="284.466"/>
+  <g>
+    <ellipse style="fill: #ffffff" cx="815.44" cy="343.984" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="815.44" cy="343.984" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="815.44" cy="343.984" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="823.94" y1="343.984" x2="980.274" y2="344.012"/>
+    <polygon style="fill: #000000" points="987.774,344.014 977.773,349.012 980.274,344.012 977.775,339.012 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="987.774,344.014 977.773,349.012 980.274,344.012 977.775,339.012 "/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="849.248" y="333.8">
+    <tspan x="849.248" y="333.8">pad 3 (source)</tspan>
+  </text>
+  <text style="fill: #0000ff;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="197" y="91">
+    <tspan x="197" y="91">sink</tspan>
+    <tspan x="197" y="107">crop</tspan>
+    <tspan x="197" y="123">selection</tspan>
+  </text>
+  <text style="fill: #a020f0;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="553" y="95">
+    <tspan x="553" y="95">source</tspan>
+    <tspan x="553" y="111">crop</tspan>
+    <tspan x="553" y="127">selection</tspan>
+  </text>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x1="211" y1="132" x2="166.21" y2="135.287"/>
+    <polygon style="fill: #0000ff" points="158.73,135.836 168.337,130.118 166.21,135.287 169.069,140.091 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" points="158.73,135.836 168.337,130.118 166.21,135.287 169.069,140.091 "/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x1="209" y1="131" x2="115.581" y2="306.209"/>
+    <polygon style="fill: #0000ff" points="112.052,312.827 112.345,301.65 115.581,306.209 121.169,306.355 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" points="112.052,312.827 112.345,301.65 115.581,306.209 121.169,306.355 "/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x1="550.492" y1="133.214" x2="514.916" y2="186.469"/>
+    <polygon style="fill: #a020f0" points="510.75,192.706 512.147,181.613 514.916,186.469 520.463,187.168 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" points="510.75,192.706 512.147,181.613 514.916,186.469 520.463,187.168 "/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x1="550.072" y1="133.787" x2="510.618" y2="275.089"/>
+    <polygon style="fill: #a020f0" points="508.601,282.312 506.475,271.336 510.618,275.089 516.106,274.025 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" points="508.601,282.312 506.475,271.336 510.618,275.089 516.106,274.025 "/>
+  </g>
+</svg>
diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.dia b/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.dia
new file mode 100644
index 0000000..0cd50a7
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.dia
@@ -0,0 +1,1152 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<dia:diagram xmlns:dia="http://www.lysator.liu.se/~alla/dia/">
+  <dia:diagramdata>
+    <dia:attribute name="background">
+      <dia:color val="#ffffff"/>
+    </dia:attribute>
+    <dia:attribute name="pagebreak">
+      <dia:color val="#000099"/>
+    </dia:attribute>
+    <dia:attribute name="paper">
+      <dia:composite type="paper">
+        <dia:attribute name="name">
+          <dia:string>#A4#</dia:string>
+        </dia:attribute>
+        <dia:attribute name="tmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="bmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="lmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="rmargin">
+          <dia:real val="2.8222000598907471"/>
+        </dia:attribute>
+        <dia:attribute name="is_portrait">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+        <dia:attribute name="scaling">
+          <dia:real val="0.49000000953674316"/>
+        </dia:attribute>
+        <dia:attribute name="fitto">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="grid">
+      <dia:composite type="grid">
+        <dia:attribute name="width_x">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="width_y">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_x">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_y">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:composite type="color"/>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="color">
+      <dia:color val="#d8e5e5"/>
+    </dia:attribute>
+    <dia:attribute name="guides">
+      <dia:composite type="guides">
+        <dia:attribute name="hguides"/>
+        <dia:attribute name="vguides"/>
+      </dia:composite>
+    </dia:attribute>
+  </dia:diagramdata>
+  <dia:layer name="Background" visible="true" active="true">
+    <dia:object type="Standard - Box" version="0" id="O0">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-0.4,6.5"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-0.45,6.45;39.95,22.9"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="-0.4,6.5"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="40.299999999999997"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="16.349999999999998"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O1">
+      <dia:attribute name="obj_pos">
+        <dia:point val="0.225,9.45"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="0.175,9.4;8.225,14.7"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="0.225,9.45"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="7.9499999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="5.1999999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#a52a2a"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O2">
+      <dia:attribute name="obj_pos">
+        <dia:point val="2.475,10.2"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="2.425,10.15;7.225,14.1"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="2.475,10.2"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="4.6999999999999975"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.8499999999999979"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#0000ff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O3">
+      <dia:attribute name="obj_pos">
+        <dia:point val="3,11.2"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="3,10.605;5.8775,12.9525"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink
+crop
+selection#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="3,11.2"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#0000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O4">
+      <dia:attribute name="obj_pos">
+        <dia:point val="1.475,7.9"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="1.475,7.305;1.475,8.0525"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>##</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="1.475,7.9"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O5">
+      <dia:attribute name="obj_pos">
+        <dia:point val="0.426918,7.89569"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="0.426918,7.30069;3.90942,8.84819"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink media
+bus format#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="0.426918,7.89569"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#a52a2a"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O6">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.6822,9.28251"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="16.6322,9.23251;24.9922,17.9564"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="16.6822,9.28251"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="8.2600228398861297"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="8.6238900617957164"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#00ff00"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O7">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.6822,17.9064"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="2.41365,13.9886;16.7436,17.9678"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="16.6822,17.9064"/>
+        <dia:point val="2.475,14.05"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O6" connection="5"/>
+        <dia:connection handle="1" to="O2" connection="5"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O8">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.6822,9.28251"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="2.42188,9.22939;16.7353,10.2531"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="16.6822,9.28251"/>
+        <dia:point val="2.475,10.2"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O6" connection="0"/>
+        <dia:connection handle="1" to="O2" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O9">
+      <dia:attribute name="obj_pos">
+        <dia:point val="24.9422,17.9064"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="7.11553,13.9905;25.0017,17.9659"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="24.9422,17.9064"/>
+        <dia:point val="7.175,14.05"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O6" connection="7"/>
+        <dia:connection handle="1" to="O2" connection="7"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O10">
+      <dia:attribute name="obj_pos">
+        <dia:point val="24.9422,9.28251"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="7.12249,9.23;24.9947,10.2525"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="24.9422,9.28251"/>
+        <dia:point val="7.175,10.2"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O6" connection="2"/>
+        <dia:connection handle="1" to="O2" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O11">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.7352,7.47209"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="16.7352,6.87709;22.5602,8.42459"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#sink compose
+selection (scaling)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="16.7352,7.47209"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#00ff00"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O12">
+      <dia:attribute name="obj_pos">
+        <dia:point val="19.1161,9.97825"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="19.0661,9.92825;24.1754,13.6009"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="19.1161,9.97825"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="5.009308462554376"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.5726155970598077"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#a020f0"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O13">
+      <dia:attribute name="obj_pos">
+        <dia:point val="27.1661,7.47209"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="27.1661,6.87709;30.0436,9.22459"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#source
+crop
+selection#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="27.1661,7.47209"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#a020f0"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O14">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.575,7.8564"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="34.575,7.2614;38.8975,8.8089"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#source media
+bus format#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="34.575,7.8564"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#8b6914"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O15">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.5244,11.2917"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="34.4744,11.2417;39.5837,14.9143"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="34.5244,11.2917"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="5.009308462554376"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.5726155970598077"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#8b6914"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O16">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.5244,14.8643"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="19.062,13.4968;34.5785,14.9184"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="34.5244,14.8643"/>
+        <dia:point val="19.1161,13.5509"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O15" connection="5"/>
+        <dia:connection handle="1" to="O12" connection="5"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O17">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.5244,11.2917"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="19.062,9.92418;34.5785,11.3458"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="34.5244,11.2917"/>
+        <dia:point val="19.1161,9.97825"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O15" connection="0"/>
+        <dia:connection handle="1" to="O12" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O18">
+      <dia:attribute name="obj_pos">
+        <dia:point val="39.5337,14.8643"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="24.0713,13.4968;39.5878,14.9184"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="39.5337,14.8643"/>
+        <dia:point val="24.1254,13.5509"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O15" connection="7"/>
+        <dia:connection handle="1" to="O12" connection="7"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O19">
+      <dia:attribute name="obj_pos">
+        <dia:point val="39.5337,11.2917"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="24.0713,9.92418;39.5878,11.3458"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="39.5337,11.2917"/>
+        <dia:point val="24.1254,9.97825"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O15" connection="2"/>
+        <dia:connection handle="1" to="O12" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O20">
+      <dia:attribute name="obj_pos">
+        <dia:point val="39.98,12.0742"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="39.93,12.0242;40.88,12.9742"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="39.98,12.0742"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O21">
+      <dia:attribute name="obj_pos">
+        <dia:point val="40.83,12.4992"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="40.78,12.1388;49.2453,12.8624"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="40.83,12.4992"/>
+        <dia:point val="49.1335,12.5007"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O20" connection="3"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O22">
+      <dia:attribute name="obj_pos">
+        <dia:point val="42.0954,11.99"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="42.0954,11.395;46.7404,12.1425"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 1 (source)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="42.0954,11.99"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O23">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-1.44491,11.6506"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-1.49491,11.6006;-0.54491,12.5506"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="-1.44491,11.6506"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O24">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-9.61991,12.09"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-9.67,11.7149;-1.33311,12.4385"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="-9.61991,12.09"/>
+        <dia:point val="-1.44491,12.0756"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O23" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O25">
+      <dia:attribute name="obj_pos">
+        <dia:point val="-7.39291,11.49"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="-7.39291,10.895;-3.58791,11.6425"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 0 (sink)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="-7.39291,11.49"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O26">
+      <dia:attribute name="obj_pos">
+        <dia:point val="19.4911,13.8333"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="19.4411,13.7833;24.5504,17.4559"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="19.4911,13.8333"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="5.009308462554376"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.5726155970598077"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#a020f0"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Box" version="0" id="O27">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.4994,17.2967"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="34.4494,17.2467;39.5587,20.9193"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="34.4994,17.2967"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="5.009308462554376"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="3.5726155970598077"/>
+      </dia:attribute>
+      <dia:attribute name="border_width">
+        <dia:real val="0.10000000149011612"/>
+      </dia:attribute>
+      <dia:attribute name="border_color">
+        <dia:color val="#8b6914"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O28">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.4994,20.8693"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="19.4311,17.3459;34.5594,20.9293"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="34.4994,20.8693"/>
+        <dia:point val="19.4911,17.4059"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O27" connection="5"/>
+        <dia:connection handle="1" to="O26" connection="5"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O29">
+      <dia:attribute name="obj_pos">
+        <dia:point val="34.4994,17.2967"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="19.4311,13.7733;34.5594,17.3567"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="34.4994,17.2967"/>
+        <dia:point val="19.4911,13.8333"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O27" connection="0"/>
+        <dia:connection handle="1" to="O26" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O30">
+      <dia:attribute name="obj_pos">
+        <dia:point val="39.5087,20.8693"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="24.4404,17.3459;39.5687,20.9293"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="39.5087,20.8693"/>
+        <dia:point val="24.5004,17.4059"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O27" connection="7"/>
+        <dia:connection handle="1" to="O26" connection="7"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O31">
+      <dia:attribute name="obj_pos">
+        <dia:point val="39.5087,17.2967"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="24.4404,13.7733;39.5687,17.3567"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="39.5087,17.2967"/>
+        <dia:point val="24.5004,13.8333"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#e60505"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="4"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O27" connection="2"/>
+        <dia:connection handle="1" to="O26" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O32">
+      <dia:attribute name="obj_pos">
+        <dia:point val="39.855,18.7792"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="39.805,18.7292;40.755,19.6792"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="39.855,18.7792"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.84999999999999787"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O33">
+      <dia:attribute name="obj_pos">
+        <dia:point val="40.705,19.2042"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="40.655,18.8438;49.1203,19.5674"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="40.705,19.2042"/>
+        <dia:point val="49.0085,19.2057"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O32" connection="3"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O34">
+      <dia:attribute name="obj_pos">
+        <dia:point val="41.9704,18.695"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="41.9704,18.1;46.6154,18.8475"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#pad 2 (source)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="41.9704,18.695"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O35">
+      <dia:attribute name="obj_pos">
+        <dia:point val="27.3,9.55"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="24.0146,9.49376;27.3562,10.255"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="27.3,9.55"/>
+        <dia:point val="24.1254,9.97825"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#a020f0"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O12" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O36">
+      <dia:attribute name="obj_pos">
+        <dia:point val="27.3454,9.53624"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="24.4311,9.46695;27.4147,13.9265"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="27.3454,9.53624"/>
+        <dia:point val="24.5004,13.8333"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_color">
+        <dia:color val="#a020f0"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="22"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="1" to="O26" connection="2"/>
+      </dia:connections>
+    </dia:object>
+  </dia:layer>
+</dia:diagram>
diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.svg b/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.svg
new file mode 100644
index 0000000..2340c0f
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.svg
@@ -0,0 +1,116 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd">
+<svg width="59cm" height="17cm" viewBox="-194 128 1179 330" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+  <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="-8" y="130" width="806" height="327"/>
+  <g>
+    <rect style="fill: #ffffff" x="4.5" y="189" width="159" height="104"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a52a2a" x="4.5" y="189" width="159" height="104"/>
+  </g>
+  <g>
+    <rect style="fill: #ffffff" x="49.5" y="204" width="94" height="77"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x="49.5" y="204" width="94" height="77"/>
+  </g>
+  <text style="fill: #0000ff;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="60" y="224">
+    <tspan x="60" y="224">sink</tspan>
+    <tspan x="60" y="240">crop</tspan>
+    <tspan x="60" y="256">selection</tspan>
+  </text>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="29.5" y="158">
+    <tspan x="29.5" y="158"></tspan>
+  </text>
+  <text style="fill: #a52a2a;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="8.53836" y="157.914">
+    <tspan x="8.53836" y="157.914">sink media</tspan>
+    <tspan x="8.53836" y="173.914">bus format</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="333.644" y="185.65" width="165.2" height="172.478"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #00ff00" x="333.644" y="185.65" width="165.2" height="172.478"/>
+  </g>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="333.644" y1="358.128" x2="49.5" y2="281"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="333.644" y1="185.65" x2="49.5" y2="204"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="498.844" y1="358.128" x2="143.5" y2="281"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="498.844" y1="185.65" x2="143.5" y2="204"/>
+  <text style="fill: #00ff00;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="334.704" y="149.442">
+    <tspan x="334.704" y="149.442">sink compose</tspan>
+    <tspan x="334.704" y="165.442">selection (scaling)</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="382.322" y="199.565" width="100.186" height="71.4523"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x="382.322" y="199.565" width="100.186" height="71.4523"/>
+  </g>
+  <text style="fill: #a020f0;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="543.322" y="149.442">
+    <tspan x="543.322" y="149.442">source</tspan>
+    <tspan x="543.322" y="165.442">crop</tspan>
+    <tspan x="543.322" y="181.442">selection</tspan>
+  </text>
+  <text style="fill: #8b6914;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="691.5" y="157.128">
+    <tspan x="691.5" y="157.128">source media</tspan>
+    <tspan x="691.5" y="173.128">bus format</tspan>
+  </text>
+  <g>
+    <rect style="fill: #ffffff" x="690.488" y="225.834" width="100.186" height="71.4523"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="690.488" y="225.834" width="100.186" height="71.4523"/>
+  </g>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="690.488" y1="297.286" x2="382.322" y2="271.018"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="690.488" y1="225.834" x2="382.322" y2="199.565"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="790.674" y1="297.286" x2="482.508" y2="271.018"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="790.674" y1="225.834" x2="482.508" y2="199.565"/>
+  <g>
+    <ellipse style="fill: #ffffff" cx="808.1" cy="249.984" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="808.1" cy="249.984" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="808.1" cy="249.984" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="816.6" y1="249.984" x2="972.934" y2="250.012"/>
+    <polygon style="fill: #000000" points="980.434,250.014 970.433,255.012 972.934,250.012 970.435,245.012 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="980.434,250.014 970.433,255.012 972.934,250.012 970.435,245.012 "/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="841.908" y="239.8">
+    <tspan x="841.908" y="239.8">pad 1 (source)</tspan>
+  </text>
+  <g>
+    <ellipse style="fill: #ffffff" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="-192.398" y1="241.8" x2="-38.6343" y2="241.529"/>
+    <polygon style="fill: #000000" points="-31.1343,241.516 -41.1254,246.534 -38.6343,241.529 -41.1431,236.534 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-31.1343,241.516 -41.1254,246.534 -38.6343,241.529 -41.1431,236.534 "/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="-147.858" y="229.8">
+    <tspan x="-147.858" y="229.8">pad 0 (sink)</tspan>
+  </text>
+  <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x="389.822" y="276.666" width="100.186" height="71.4523"/>
+  <g>
+    <rect style="fill: #ffffff" x="689.988" y="345.934" width="100.186" height="71.4523"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="689.988" y="345.934" width="100.186" height="71.4523"/>
+  </g>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="689.988" y1="417.386" x2="389.822" y2="348.118"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="689.988" y1="345.934" x2="389.822" y2="276.666"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="790.174" y1="417.386" x2="490.008" y2="348.118"/>
+  <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="790.174" y1="345.934" x2="490.008" y2="276.666"/>
+  <g>
+    <ellipse style="fill: #ffffff" cx="805.6" cy="384.084" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="805.6" cy="384.084" rx="8.5" ry="8.5"/>
+    <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="805.6" cy="384.084" rx="8.5" ry="8.5"/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="814.1" y1="384.084" x2="970.434" y2="384.112"/>
+    <polygon style="fill: #000000" points="977.934,384.114 967.933,389.112 970.434,384.112 967.935,379.112 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="977.934,384.114 967.933,389.112 970.434,384.112 967.935,379.112 "/>
+  </g>
+  <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="839.408" y="373.9">
+    <tspan x="839.408" y="373.9">pad 2 (source)</tspan>
+  </text>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x1="546" y1="191" x2="492.157" y2="198.263"/>
+    <polygon style="fill: #a020f0" points="484.724,199.266 493.966,192.974 492.157,198.263 495.303,202.884 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" points="484.724,199.266 493.966,192.974 492.157,198.263 495.303,202.884 "/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x1="546.908" y1="190.725" x2="495.383" y2="268.548"/>
+    <polygon style="fill: #a020f0" points="491.242,274.802 492.594,263.703 495.383,268.548 500.932,269.224 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" points="491.242,274.802 492.594,263.703 495.383,268.548 500.932,269.224 "/>
+  </g>
+</svg>
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 08/35] v4l: Add subdev selections documentation: svg and dia files
  2012-03-06 16:32 ` [PATCH v5 08/35] v4l: Add subdev selections documentation: svg and dia files Sakari Ailus
@ 2012-03-06 16:42   ` Laurent Pinchart
  0 siblings, 0 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-06 16:42 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:32:49 Sakari Ailus wrote:
> Add svga and dia files for V4L2 subdev selections documentation.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 09/35] v4l: Add subdev selections documentation
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (7 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 08/35] v4l: Add subdev selections documentation: svg and dia files Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:44   ` Laurent Pinchart
                     ` (2 more replies)
  2012-03-06 16:32 ` [PATCH v5 10/35] v4l: Mark VIDIOC_SUBDEV_G_CROP and VIDIOC_SUBDEV_S_CROP obsolete Sakari Ailus
                   ` (25 subsequent siblings)
  34 siblings, 3 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add documentation for V4L2 subdev selection API. This changes also
experimental V4L2 subdev API so that scaling now works through selection API
only.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 Documentation/DocBook/media/Makefile               |    4 +-
 Documentation/DocBook/media/v4l/compat.xml         |    9 +
 Documentation/DocBook/media/v4l/dev-subdev.xml     |  202 +++++++++++++++--
 Documentation/DocBook/media/v4l/v4l2.xml           |   17 ++-
 .../media/v4l/vidioc-subdev-g-selection.xml        |  228 ++++++++++++++++++++
 5 files changed, 433 insertions(+), 27 deletions(-)
 create mode 100644 Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml

diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile
index 6628b4b..3625209 100644
--- a/Documentation/DocBook/media/Makefile
+++ b/Documentation/DocBook/media/Makefile
@@ -70,6 +70,8 @@ IOCTLS = \
 	VIDIOC_SUBDEV_ENUM_MBUS_CODE \
 	VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
 	VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
+	VIDIOC_SUBDEV_G_SELECTION \
+	VIDIOC_SUBDEV_S_SELECTION \
 
 TYPES = \
 	$(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/linux/videodev2.h) \
@@ -193,7 +195,7 @@ DVB_DOCUMENTED = \
 #
 
 install_media_images = \
-	$(Q)cp $(OBJIMGFILES) $(MEDIA_OBJ_DIR)/media_api
+	$(Q)cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
 
 $(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
 	$(Q)base64 -d $< >$@
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index 8cd5c96..603fa4ad 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2407,6 +2407,11 @@ details.</para>
 	  <para>Added integer menus, the new type will be
 	  V4L2_CTRL_TYPE_INTEGER_MENU.</para>
         </listitem>
+        <listitem>
+	  <para>Added selection API for V4L2 subdev interface:
+	  &VIDIOC-SUBDEV-G-SELECTION; and
+	  &VIDIOC-SUBDEV-S-SELECTION;.</para>
+        </listitem>
       </orderedlist>
     </section>
 
@@ -2523,6 +2528,10 @@ ioctls.</para>
         <listitem>
 	  <para>Selection API. <xref linkend="selection-api" /></para>
         </listitem>
+        <listitem>
+	  <para>Sub-device selection API: &VIDIOC-SUBDEV-G-SELECTION;
+	  and &VIDIOC-SUBDEV-S-SELECTION; ioctls.</para>
+        </listitem>
       </itemizedlist>
     </section>
 
diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml
index 0916a73..f4c623e 100644
--- a/Documentation/DocBook/media/v4l/dev-subdev.xml
+++ b/Documentation/DocBook/media/v4l/dev-subdev.xml
@@ -76,11 +76,12 @@
     <wordasword>format</wordasword> means the combination of media bus data
     format, frame width and frame height.</para></note>
 
-    <para>Image formats are typically negotiated on video capture and output
-    devices using the <link linkend="crop">cropping and scaling</link> ioctls.
-    The driver is responsible for configuring every block in the video pipeline
-    according to the requested format at the pipeline input and/or
-    output.</para>
+    <para>Image formats are typically negotiated on video capture and
+    output devices using the format and <link
+    linkend="vidioc-subdev-g-selection">selection</link> ioctls. The
+    driver is responsible for configuring every block in the video
+    pipeline according to the requested format at the pipeline input
+    and/or output.</para>
 
     <para>For complex devices, such as often found in embedded systems,
     identical image sizes at the output of a pipeline can be achieved using
@@ -276,11 +277,11 @@
     </section>
 
     <section>
-      <title>Cropping and scaling</title>
+      <title>Selections: cropping, scaling and composition</title>
 
       <para>Many sub-devices support cropping frames on their input or output
       pads (or possible even on both). Cropping is used to select the area of
-      interest in an image, typically on a video sensor or video decoder. It can
+      interest in an image, typically on an image sensor or a video decoder. It can
       also be used as part of digital zoom implementations to select the area of
       the image that will be scaled up.</para>
 
@@ -288,26 +289,179 @@
       &v4l2-rect; by the coordinates of the top left corner and the rectangle
       size. Both the coordinates and sizes are expressed in pixels.</para>
 
-      <para>The crop rectangle is retrieved and set using the
-      &VIDIOC-SUBDEV-G-CROP; and &VIDIOC-SUBDEV-S-CROP; ioctls. Like for pad
-      formats, drivers store try and active crop rectangles. The format
-      negotiation mechanism applies to crop settings as well.</para>
-
-      <para>On input pads, cropping is applied relatively to the current pad
-      format. The pad format represents the image size as received by the
-      sub-device from the previous block in the pipeline, and the crop rectangle
-      represents the sub-image that will be transmitted further inside the
-      sub-device for processing. The crop rectangle be entirely containted
-      inside the input image size.</para>
-
-      <para>Input crop rectangle are reset to their default value when the input
-      image format is modified. Drivers should use the input image size as the
-      crop rectangle default value, but hardware requirements may prevent this.
-      </para>
+      <para>As for pad formats, drivers store try and active
+      rectangles for the selection targets of ACTIVE type <xref
+      linkend="v4l2-subdev-selection-targets">.</xref></para>
+
+      <para>On sink pads, cropping is applied relatively to the
+      current pad format. The pad format represents the image size as
+      received by the sub-device from the previous block in the
+      pipeline, and the crop rectangle represents the sub-image that
+      will be transmitted further inside the sub-device for
+      processing.</para>
+
+      <para>The scaling operation changes the size of the image by
+      scaling it to new dimensions. The scaling ratio isn't specified
+      explicitly, but is implied from the original and scaled image
+      sizes. Both sizes are represented by &v4l2-rect;.</para>
+
+      <para>Scaling support is optional. When supported by a subdev,
+      the crop rectangle on the subdev's sink pad is scaled to the
+      size configured using &sub-subdev-g-selection; and
+      <constant>V4L2_SUBDEV_SEL_COMPOSE_ACTIVE</constant> selection
+      target on the same pad. If the subdev supports scaling but not
+      composing, the top and left values are not used and must always
+      be set to zero.</para>
+
+      <para>On source pads, cropping is similar to sink pads, with the
+      exception that the source size from which the cropping is
+      performed, is the COMPOSE rectangle on the sink pad. In both
+      sink and source pads, the crop rectangle must be entirely
+      containted inside the source image size for the crop
+      operation.</para>
+
+      <para>The drivers should always use the closest possible
+      rectangle the user requests on all selection targets, unless
+      specificly told otherwise.
+      <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant> and
+      <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant> flags may be
+      used to round the image size either up or down. <xref
+      linkend="v4l2-subdev-selection-flags"></xref></para>
+    </section>
+
+    <section>
+      <title>Types of selection targets</title>
+
+      <section>
+	<title>ACTIVE targets</title>
+
+	<para>ACTIVE targets reflect the actual hardware configuration
+	at any point of time. There is a BOUNDS target
+	corresponding to every ACTIVE target.</para>
+      </section>
+
+      <section>
+	<title>BOUNDS targets</title>
+
+	<para>BOUNDS targets is the smallest rectangle that contains
+	all valid ACTIVE rectangles. It may not be possible to set the
+	ACTIVE rectangle as large as the BOUNDS rectangle, however.
+	This may be because e.g. a sensor's pixel array is not
+	rectangular but cross-shaped or round. The maximum size may
+	also be smaller than the BOUNDS rectangle.</para>
+      </section>
 
-      <para>Cropping behaviour on output pads is not defined.</para>
+    </section>
+
+    <section>
+      <title>Order of configuration and format propagation</title>
+
+      <para>Inside subdevs, the order of image processing steps will
+      always be from the sink pad towards the source pad. This is also
+      reflected in the order in which the configuration must be
+      performed by the user: the changes made will be propagated to
+      any subsequent stages. If this behaviour is not desired, the
+      user must set
+      <constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant> flag. This
+      flag causes that no propagation of the changes are allowed in
+      any circumstances. This may also cause the accessed rectangle to
+      be adjusted by the driver, depending on the properties of the
+      underlying hardware.</para>
+
+      <para>The coordinates to a step always refer to the active size
+      of the previous step. The exception to this rule is the source
+      compose rectangle, which refers to the sink compose bounds
+      rectangle --- if it is supported by the hardware.</para>
+
+      <orderedlist>
+	<listitem>Sink pad format. The user configures the sink pad
+	format. This format defines the parameters of the image the
+	entity receives through the pad for further processing.</listitem>
+
+	<listitem>Sink pad active crop selection. The sink pad crop
+	defines the crop performed to the sink pad format.</listitem>
+
+	<listitem>Sink pad active compose selection. The size of the
+	sink pad compose rectangle defines the scaling ratio compared
+	to the size of the sink pad crop rectangle. The location of
+	the compose rectangle specifies the location of the active
+	sink compose rectangle in the sink compose bounds
+	rectangle.</listitem>
+
+	<listitem>Source pad active crop selection. Crop on the source
+	pad defines crop performed to the image in the sink compose
+	bounds rectangle.</listitem>
+
+	<listitem>Source pad format. The source pad format defines the
+	output pixel format of the subdev, as well as the other
+	parameters with the exception of the image width and height.
+	Width and height are defined by the size of the source pad
+	active crop selection.</listitem>
+      </orderedlist>
+
+      <para>Accessing any of the above rectangles not supported by the
+      subdev will return <constant>EINVAL</constant>. Any rectangle
+      referring to a previous unsupported rectangle coordinates will
+      instead refer to the previous supported rectangle. For example,
+      if sink crop is not supported, the compose selection will refer
+      to the sink pad format dimensions instead.</para>
+
+      <figure id="subdev-image-processing-crop">
+	<title>Image processing in subdevs: simple crop example</title>
+	<mediaobject>
+	  <imageobject>
+	    <imagedata fileref="subdev-image-processing-crop.svg"
+	    format="SVG" scale="200" />
+	  </imageobject>
+	</mediaobject>
+      </figure>
+
+      <para>In the above example, the subdev supports cropping on its
+      sink pad. To configure it, the user sets the media bus format on
+      the subdev's sink pad. Now the active crop rectangle can be set
+      on the sink pad --- the location and size of this rectangle
+      reflect the location and size of a rectangle to be cropped from
+      the sink format. The size of the sink crop rectangle will also
+      be the size of the format of the subdev's source pad.</para>
+
+      <figure id="subdev-image-processing-scaling-multi-source">
+	<title>Image processing in subdevs: scaling with multiple sources</title>
+	<mediaobject>
+	  <imageobject>
+	    <imagedata fileref="subdev-image-processing-scaling-multi-source.svg"
+	    format="SVG" scale="200" />
+	  </imageobject>
+	</mediaobject>
+      </figure>
+
+      <para>In this example, the subdev is capable of first cropping,
+      then scaling and finally cropping for two source pads
+      individually from the resulting scaled image. The location of
+      the scaled image in the cropped image is ignored in sink compose
+      target. Both of the locations of the source crop rectangles
+      refer to the sink scaling rectangle, independently cropping an
+      area at location specified by the source crop rectangle from
+      it.</para>
+
+      <figure id="subdev-image-processing-full">
+	<title>Image processing in subdevs: scaling and composition
+	with multiple sinks and sources</title>
+	<mediaobject>
+	  <imageobject>
+	    <imagedata fileref="subdev-image-processing-full.svg"
+	    format="SVG" scale="200" />
+	  </imageobject>
+	</mediaobject>
+      </figure>
+
+      <para>The subdev driver supports two sink pads and two source
+      pads. The images from both of the sink pads are individually
+      cropped, then scaled and further composed on the composition
+      bounds rectangle. From that, two independent streams are cropped
+      and sent out of the subdev from the source pads.</para>
 
     </section>
+
   </section>
 
   &sub-subdev-formats;
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index ff11a13..912ec9c 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -96,6 +96,17 @@ Remote Controller chapter.</contrib>
 	  </address>
 	</affiliation>
       </author>
+
+      <author>
+	<firstname>Sakari</firstname>
+	<surname>Ailus</surname>
+	<contrib>Subdev selections API.</contrib>
+	<affiliation>
+	  <address>
+	    <email>sakari.ailus@iki.fi</email>
+	  </address>
+	</affiliation>
+      </author>
     </authorgroup>
 
     <copyright>
@@ -129,9 +140,10 @@ applications. -->
 
       <revision>
 	<revnumber>3.4</revnumber>
-	<date>2012-01-26</date>
+	<date>2012-02-02</date>
 	<authorinitials>sa</authorinitials>
-	<revremark>Added V4L2_CTRL_TYPE_INTEGER_MENU.</revremark>
+	<revremark>Added V4L2_CTRL_TYPE_INTEGER_MENU. Added V4L2 subdev
+		   selections API.</revremark>
       </revision>
       <revision>
 	<revnumber>3.3</revnumber>
@@ -537,6 +549,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-subdev-g-crop;
     &sub-subdev-g-fmt;
     &sub-subdev-g-frame-interval;
+    &sub-subdev-g-selection;
     &sub-subscribe-event;
     <!-- End of ioctls. -->
     &sub-mmap;
diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
new file mode 100644
index 0000000..9164b85
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
@@ -0,0 +1,228 @@
+<refentry id="vidioc-subdev-g-selection">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_SUBDEV_G_SELECTION</refname>
+    <refname>VIDIOC_SUBDEV_S_SELECTION</refname>
+    <refpurpose>Get or set selection rectangles on a subdev pad</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_subdev_selection *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <note>
+      <title>Experimental</title>
+      <para>This is an <link linkend="experimental">experimental</link>
+      interface and may change in the future.</para>
+    </note>
+
+    <para>The selections are used to configure various image
+    processing functionality performed by the subdevs which affect the
+    image size. This currently includes cropping, scaling and
+    composition.</para>
+
+    <para>The selection API replaces <link
+    linkend="vidioc-subdev-g-crop">the old subdev crop API</link>. All
+    the function of the crop API, and more, are supported by the
+    selections API.</para>
+
+    <para>See <xref linkend="subdev"></xref> for
+    more information on how each selection target affects the image
+    processing pipeline inside the subdevice.</para>
+
+    <section>
+      <title>Types of selection targets</title>
+
+      <para>There are two types of selection targets: active and bounds.
+      The ACTIVE targets are the targets which configure the hardware.
+      The BOUNDS target will return a rectangle that contain all
+      possible ACTIVE rectangles.</para>
+    </section>
+
+    <section>
+      <title>Discovering supported features</title>
+
+      <para>To discover which targets are supported, the user can
+      perform <constant>VIDIOC_SUBDEV_G_SELECTION</constant> on them.
+      Any unsupported target will return
+      <constant>EINVAL</constant>.</para>
+    </section>
+
+    <table pgwide="1" frame="none" id="v4l2-subdev-selection-targets">
+      <title>V4L2 subdev selection targets</title>
+      <tgroup cols="3">
+        &cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE</constant></entry>
+	    <entry>0x0000</entry>
+	    <entry>Active crop. Defines the cropping
+	    performed by the processing step.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS</constant></entry>
+	    <entry>0x0002</entry>
+	    <entry>Bounds of the crop rectangle.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE</constant></entry>
+	    <entry>0x0100</entry>
+	    <entry>Active compose rectangle. Used to configure scaling
+	    on sink pads and composition on source pads.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS</constant></entry>
+	    <entry>0x0102</entry>
+	    <entry>Bounds of the compose rectangle.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="v4l2-subdev-selection-flags">
+      <title>V4L2 subdev selection flags</title>
+      <tgroup cols="3">
+        &cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant></entry>
+	    <entry>(1 &lt;&lt; 0)</entry> <entry>Suggest the driver it
+	    should choose greater or equal rectangle (in size) than
+	    was requested. Albeit the driver may choose a lesser size,
+	    it will only do so due to hardware limitations. Without
+	    this flag (and
+	    <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant>) the
+	    behaviour is to choose the closest possible
+	    rectangle.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant></entry>
+	    <entry>(1 &lt;&lt; 1)</entry> <entry>Suggest the driver it
+	    should choose lesser or equal rectangle (in size) than was
+	    requested. Albeit the driver may choose a greater size, it
+	    will only do so due to hardware limitations.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant></entry>
+	    <entry>(1 &lt;&lt; 2)</entry>
+	    <entry>The configuration should not be propagated to any
+	    further processing steps. If this flag is not given, the
+	    configuration is propagated inside the subdevice to all
+	    further processing steps.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="v4l2-subdev-selection">
+      <title>struct <structname>v4l2_subdev_selection</structname></title>
+      <tgroup cols="3">
+        &cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>which</structfield></entry>
+	    <entry>Active or try selection, from
+	    &v4l2-subdev-format-whence;.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>pad</structfield></entry>
+	    <entry>Pad number as reported by the media framework.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>target</structfield></entry>
+	    <entry>Target selection rectangle. See
+	    <xref linkend="v4l2-subdev-selection-targets">.</xref>.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>flags</structfield></entry>
+	    <entry>Flags. See
+	    <xref linkend="v4l2-subdev-selection-flags">.</xref></entry>
+	  </row>
+	  <row>
+	    <entry>&v4l2-rect;</entry>
+	    <entry><structfield>rect</structfield></entry>
+	    <entry>Crop rectangle boundaries, in pixels.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[8]</entry>
+	    <entry>Reserved for future extensions. Applications and drivers must
+	    set the array to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EBUSY</errorcode></term>
+	<listitem>
+	  <para>The selection rectangle can't be changed because the
+	  pad is currently busy. This can be caused, for instance, by
+	  an active video stream on the pad. The ioctl must not be
+	  retried without performing another action to fix the problem
+	  first. Only returned by
+	  <constant>VIDIOC_SUBDEV_S_SELECTION</constant></para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The &v4l2-subdev-selection;
+	  <structfield>pad</structfield> references a non-existing
+	  pad, the <structfield>which</structfield> field references a
+	  non-existing format, or the selection target is not
+	  supported on the given subdev pad.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 09/35] v4l: Add subdev selections documentation
  2012-03-06 16:32 ` [PATCH v5 09/35] v4l: Add subdev selections documentation Sakari Ailus
@ 2012-03-06 16:44   ` Laurent Pinchart
  2012-03-07  8:53   ` Michael Jones
  2012-03-15  9:55   ` Sylwester Nawrocki
  2 siblings, 0 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-06 16:44 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:32:50 Sakari Ailus wrote:
> Add documentation for V4L2 subdev selection API. This changes also
> experimental V4L2 subdev API so that scaling now works through selection API
> only.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

(pending a possible rename of ACTIVE to something else)

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 09/35] v4l: Add subdev selections documentation
  2012-03-06 16:32 ` [PATCH v5 09/35] v4l: Add subdev selections documentation Sakari Ailus
  2012-03-06 16:44   ` Laurent Pinchart
@ 2012-03-07  8:53   ` Michael Jones
  2012-03-07 18:11     ` Sakari Ailus
  2012-03-15  9:55   ` Sylwester Nawrocki
  2 siblings, 1 reply; 93+ messages in thread
From: Michael Jones @ 2012-03-07  8:53 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Hopefully it's not too late to make a few minor suggestions.

On 03/06/2012 05:32 PM, Sakari Ailus wrote:
> Add documentation for V4L2 subdev selection API. This changes also
> experimental V4L2 subdev API so that scaling now works through selection API
> only.
>
> Signed-off-by: Sakari Ailus<sakari.ailus@iki.fi>
[snip]
> +
> +<para>On sink pads, cropping is applied relatively to the

s/relatively/relative/

> +      current pad format. The pad format represents the image size as
> +      received by the sub-device from the previous block in the
> +      pipeline, and the crop rectangle represents the sub-image that
> +      will be transmitted further inside the sub-device for
> +      processing.</para>
[snip]
> +<para>On source pads, cropping is similar to sink pads, with the
> +      exception that the source size from which the cropping is
> +      performed, is the COMPOSE rectangle on the sink pad. In both
> +      sink and source pads, the crop rectangle must be entirely
> +      containted inside the source image size for the crop

s/containted/contained/

> +      operation.</para>
> +
> +<para>The drivers should always use the closest possible
> +      rectangle the user requests on all selection targets, unless
> +      specificly told otherwise.

s/specificly/specifically/

> +<constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant>  and
> +<constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant>  flags may be
> +      used to round the image size either up or down.<xref
> +      linkend="v4l2-subdev-selection-flags"></xref></para>
> +</section>

[snip]

> +<constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant>  flag. This
> +      flag causes that no propagation of the changes are allowed in
> +      any circumstances. This may also cause the accessed rectangle to

"This flag causes that" sounds ungrammatical.  I suggest: "This flag 
causes no propagation of the changes to be allowed under any circumstances."

[snip]

Michael

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Erhard Meier

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 09/35] v4l: Add subdev selections documentation
  2012-03-07  8:53   ` Michael Jones
@ 2012-03-07 18:11     ` Sakari Ailus
  0 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 18:11 UTC (permalink / raw)
  To: Michael Jones
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Michael,

Thanks for the comments.

On Wed, Mar 07, 2012 at 09:53:42AM +0100, Michael Jones wrote:
> Hi Sakari,
> 
> Hopefully it's not too late to make a few minor suggestions.
> 
> On 03/06/2012 05:32 PM, Sakari Ailus wrote:
> >Add documentation for V4L2 subdev selection API. This changes also
> >experimental V4L2 subdev API so that scaling now works through selection API
> >only.
> >
> >Signed-off-by: Sakari Ailus<sakari.ailus@iki.fi>
> [snip]
> >+
> >+<para>On sink pads, cropping is applied relatively to the
> 
> s/relatively/relative/
> 
> >+      current pad format. The pad format represents the image size as
> >+      received by the sub-device from the previous block in the
> >+      pipeline, and the crop rectangle represents the sub-image that
> >+      will be transmitted further inside the sub-device for
> >+      processing.</para>
> [snip]
> >+<para>On source pads, cropping is similar to sink pads, with the
> >+      exception that the source size from which the cropping is
> >+      performed, is the COMPOSE rectangle on the sink pad. In both
> >+      sink and source pads, the crop rectangle must be entirely
> >+      containted inside the source image size for the crop
> 
> s/containted/contained/
> 
> >+      operation.</para>
> >+
> >+<para>The drivers should always use the closest possible
> >+      rectangle the user requests on all selection targets, unless
> >+      specificly told otherwise.
> 
> s/specificly/specifically/
> 
> >+<constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant>  and
> >+<constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant>  flags may be
> >+      used to round the image size either up or down.<xref
> >+      linkend="v4l2-subdev-selection-flags"></xref></para>
> >+</section>
> 
> [snip]
> 
> >+<constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant>  flag. This
> >+      flag causes that no propagation of the changes are allowed in
> >+      any circumstances. This may also cause the accessed rectangle to
> 
> "This flag causes that" sounds ungrammatical.  I suggest: "This flag
> causes no propagation of the changes to be allowed under any
> circumstances."

Applied all of them.

Cheers,

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 09/35] v4l: Add subdev selections documentation
  2012-03-06 16:32 ` [PATCH v5 09/35] v4l: Add subdev selections documentation Sakari Ailus
  2012-03-06 16:44   ` Laurent Pinchart
  2012-03-07  8:53   ` Michael Jones
@ 2012-03-15  9:55   ` Sylwester Nawrocki
  2012-03-15 13:00     ` Sakari Ailus
  2 siblings, 1 reply; 93+ messages in thread
From: Sylwester Nawrocki @ 2012-03-15  9:55 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

On 03/06/2012 05:32 PM, Sakari Ailus wrote:
> Add documentation for V4L2 subdev selection API. This changes also
> experimental V4L2 subdev API so that scaling now works through selection API
> only.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
>  Documentation/DocBook/media/Makefile               |    4 +-
>  Documentation/DocBook/media/v4l/compat.xml         |    9 +
>  Documentation/DocBook/media/v4l/dev-subdev.xml     |  202 +++++++++++++++--
>  Documentation/DocBook/media/v4l/v4l2.xml           |   17 ++-
>  .../media/v4l/vidioc-subdev-g-selection.xml        |  228 ++++++++++++++++++++
>  5 files changed, 433 insertions(+), 27 deletions(-)
>  cre
ate mode 100644 Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml

[snip]

> diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
> new file mode 100644
> index 0000000..9164b85
> --- /dev/null
> +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
> @@ -0,0 +1,228 @@
> +<refentry id="vidioc-subdev-g-selection">
> +  <refmeta>
> +    <refentrytitle>ioctl VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION</refentrytitle>
> +    &manvol;
> +  </refmeta>
> +
> +  <refnamediv>
> +    <refname>VIDIOC_SUBDEV_G_SELECTION</refname>
> +    <refname>VIDIOC_SUBDEV_S_SELECTION</refname>
> +    <refpurpose>Get or set selection rectangles on a subdev pad</refpurpose>
> +  </refnamediv>
> +
> +  <refsynopsisdiv>
> +    <funcsynopsis>
> +      <funcprototype>
> +	<funcdef>int <function>ioctl</function></funcdef>
> +	<paramdef>int <parameter>fd</parameter></paramdef>
> +	<paramdef>int <parameter>request</parameter></paramdef>
> +	<paramdef>struct v4l2_subdev_selection *<parameter>argp</parameter></paramdef>
> +      </funcprototype>
> +    </funcsynopsis>
> +  </refsynopsisdiv>
> +
> +  <refsect1>
> +    <title>Arguments</title>
> +
> +    <variablelist>
> +      <varlistentry>
> +	<term><parameter>fd</parameter></term>
> +	<listitem>
> +	  <para>&fd;</para>
> +	</listitem>
> +      </varlistentry>
> +      <varlistentry>
> +	<term><parameter>request</parameter></term>
> +	<listitem>
> +	  <para>VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION</para>
> +	</listitem>
> +      </varlistentry>
> +      <varlistentry>
> +	<term><parameter>argp</parameter></term>
> +	<listitem>
> +	  <para></para>
> +	</listitem>
> +      </varlistentry>
> +    </variablelist>
> +  </refsect1>
> +
> +  <refsect1>
> +    <title>Description</title>
> +
> +    <note>
> +      <title>Experimental</title>
> +      <para>This is an <link linkend="experimental">experimental</link>
> +      interface and may change in the future.</para>
> +    </note>
> +
> +    <para>The selections are used to configure various image
> +    processing functionality performed by the subdevs which affect the
> +    image size. This currently includes cropping, scaling and
> +    composition.</para>
> +
> +    <para>The selection API replaces <link
> +    linkend="vidioc-subdev-g-crop">the old subdev crop API</link>. All
> +    the function of the crop API, and more, are supported by the
> +    selections API.</para>
> +
> +    <para>See <xref linkend="subdev"></xref> for
> +    more information on how each selection target affects the image
> +    processing pipeline inside the subdevice.</para>
> +
> +    <section>
> +      <title>Types of selection targets</title>
> +
> +      <para>There are two types of selection targets: active and bounds.
> +      The ACTIVE targets are the targets which configure the hardware.
> +      The BOUNDS target will return a rectangle that contain all
> +      possible ACTIVE rectangles.</para>
> +    </section>
> +
> +    <section>
> +      <title>Discovering supported features</title>
> +
> +      <para>To discover which targets are supported, the user can
> +      perform <constant>VIDIOC_SUBDEV_G_SELECTION</constant> on them.
> +      Any unsupported target will return
> +      <constant>EINVAL</constant>.</para>
> +    </section>
> +
> +    <table pgwide="1" frame="none" id="v4l2-subdev-selection-targets">
> +      <title>V4L2 subdev selection targets</title>
> +      <tgroup cols="3">
> +        &cs-def;
> +	<tbody valign="top">
> +	  <row>
> +	    <entry><constant>V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE</constant></entry>
> +	    <entry>0x0000</entry>
> +	    <entry>Active crop. Defines the cropping
> +	    performed by the processing step.</entry>
> +	  </row>
> +	  <row>
> +	    <entry><constant>V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS</constant></entry>
> +	    <entry>0x0002</entry>
> +	    <entry>Bounds of the crop rectangle.</entry>
> +	  </row>
> +	  <row>
> +	    <entry><constant>V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE</constant></entry>
> +	    <entry>0x0100</entry>
> +	    <entry>Active compose rectangle. Used to configure scaling
> +	    on sink pads and composition on source pads.</entry>
> +	  </row>
> +	  <row>
> +	    <entry><constant>V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS</constant></entry>
> +	    <entry>0x0102</entry>
> +	    <entry>Bounds of the compose rectangle.</entry>
> +	  </row>
> +	</tbody>
> +      </tgroup>
> +    </table>
> +
> +    <table pgwide="1" frame="none" id="v4l2-subdev-selection-flags">
> +      <title>V4L2 subdev selection flags</title>
> +      <tgroup cols="3">
> +        &cs-def;
> +	<tbody valign="top">
> +	  <row>
> +	    <entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant></entry>
> +	    <entry>(1 &lt;&lt; 0)</entry> <entry>Suggest the driver it
> +	    should choose greater or equal rectangle (in size) than
> +	    was requested. Albeit the driver may choose a lesser size,
> +	    it will only do so due to hardware limitations. Without
> +	    this flag (and
> +	    <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant>) the
> +	    behaviour is to choose the closest possible
> +	    rectangle.</entry>
> +	  </row>
> +	  <row>
> +	    <entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant></entry>
> +	    <entry>(1 &lt;&lt; 1)</entry> <entry>Suggest the driver it
> +	    should choose lesser or equal rectangle (in size) than was
> +	    requested. Albeit the driver may choose a greater size, it
> +	    will only do so due to hardware limitations.</entry>
> +	  </row>
> +	  <row>
> +	    <entry><constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant></entry>
> +	    <entry>(1 &lt;&lt; 2)</entry>
> +	    <entry>The configuration should not be propagated to any
> +	    further processing steps. If this flag is not given, the
> +	    configuration is propagated inside the subdevice to all
> +	    further processing steps.</entry>
> +	  </row>
> +	</tbody>
> +      </tgroup>
> +    </table>
> +
> +    <table pgwide="1" frame="none" id="v4l2-subdev-selection">
> +      <title>struct <structname>v4l2_subdev_selection</structname></title>
> +      <tgroup cols="3">
> +        &cs-str;
> +	<tbody valign="top">
> +	  <row>
> +	    <entry>__u32</entry>
> +	    <entry><structfield>which</structfield></entry>
> +	    <entry>Active or try selection, from
> +	    &v4l2-subdev-format-whence;.</entry>
> +	  </row>
> +	  <row>
> +	    <entry>__u32</entry>
> +	    <entry><structfield>pad</structfield></entry>
> +	    <entry>Pad number as reported by the media framework.</entry>
> +	  </row>
> +	  <row>
> +	    <entry>__u32</entry>
> +	    <entry><structfield>target</structfield></entry>
> +	    <entry>Target selection rectangle. See
> +	    <xref linkend="v4l2-subdev-selection-targets">.</xref>.</entry>
> +	  </row>
> +	  <row>
> +	    <entry>__u32</entry>
> +	    <entry><structfield>flags</structfield></entry>
> +	    <entry>Flags. See
> +	    <xref linkend="v4l2-subdev-selection-flags">.</xref></entry>
> +	  </row>
> +	  <row>
> +	    <entry>&v4l2-rect;</entry>
> +	    <entry><structfield>rect</structfield></entry>
> +	    <entry>Crop rectangle boundaries, in pixels.</entry>

Shouldn't it be "Selection rectangle, in pixels." ?

> +	  </row>
> +	  <row>
> +	    <entry>__u32</entry>
> +	    <entry><structfield>reserved</structfield>[8]</entry>
> +	    <entry>Reserved for future extensions. Applications and drivers must
> +	    set the array to zero.</entry>
> +	  </row>
> +	</tbody>
> +      </tgroup>
> +    </table>
> +
> +  </refsect1>

--

Regards,
Sylwester

-- 
Sylwester Nawrocki
실베스터 나브로츠키
Samsung Poland R&D Center

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 09/35] v4l: Add subdev selections documentation
  2012-03-15  9:55   ` Sylwester Nawrocki
@ 2012-03-15 13:00     ` Sakari Ailus
  0 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-15 13:00 UTC (permalink / raw)
  To: Sylwester Nawrocki
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sylwester,

Thanks for the comment!

On Thu, Mar 15, 2012 at 10:55:25AM +0100, Sylwester Nawrocki wrote:
...
> > +	<tbody valign="top">
> > +	  <row>
> > +	    <entry>__u32</entry>
> > +	    <entry><structfield>which</structfield></entry>
> > +	    <entry>Active or try selection, from
> > +	    &v4l2-subdev-format-whence;.</entry>
> > +	  </row>
> > +	  <row>
> > +	    <entry>__u32</entry>
> > +	    <entry><structfield>pad</structfield></entry>
> > +	    <entry>Pad number as reported by the media framework.</entry>
> > +	  </row>
> > +	  <row>
> > +	    <entry>__u32</entry>
> > +	    <entry><structfield>target</structfield></entry>
> > +	    <entry>Target selection rectangle. See
> > +	    <xref linkend="v4l2-subdev-selection-targets">.</xref>.</entry>
> > +	  </row>
> > +	  <row>
> > +	    <entry>__u32</entry>
> > +	    <entry><structfield>flags</structfield></entry>
> > +	    <entry>Flags. See
> > +	    <xref linkend="v4l2-subdev-selection-flags">.</xref></entry>
> > +	  </row>
> > +	  <row>
> > +	    <entry>&v4l2-rect;</entry>
> > +	    <entry><structfield>rect</structfield></entry>
> > +	    <entry>Crop rectangle boundaries, in pixels.</entry>
> 
> Shouldn't it be "Selection rectangle, in pixels." ?

Indeed. Fixed and pushed to my git.linuxtv.org tree. Nothing changes in the
pull req so I won't send a new one. :-)

Cheers,

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 10/35] v4l: Mark VIDIOC_SUBDEV_G_CROP and VIDIOC_SUBDEV_S_CROP obsolete
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (8 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 09/35] v4l: Add subdev selections documentation Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 11/35] v4l: Image source control class Sakari Ailus
                   ` (24 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

These two IOCTLS are obsoleted by VIDIOC_SUBDEV_G_SELECTION and
VIDIOC_SUBDEV_S_SELECTION. Mark them obsolete.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/DocBook/media/v4l/compat.xml         |    7 +++++++
 .../DocBook/media/v4l/vidioc-subdev-g-crop.xml     |    9 ++++++---
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index 603fa4ad..ebfe47e 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2547,6 +2547,13 @@ interfaces and should not be implemented in new drivers.</para>
 <constant>VIDIOC_S_MPEGCOMP</constant> ioctls. Use Extended Controls,
 <xref linkend="extended-controls" />.</para>
         </listitem>
+        <listitem>
+	  <para><constant>VIDIOC_SUBDEV_G_CROP</constant> and
+	  <constant>VIDIOC_SUBDEV_S_CROP</constant> ioctls. Use
+	  <constant>VIDIOC_SUBDEV_G_SELECTION</constant> and
+	  <constant>VIDIOC_SUBDEV_S_SELECTION</constant>, <xref
+	  linkend="vidioc-subdev-g-selection" />.</para>
+        </listitem>
       </itemizedlist>
     </section>
   </section>
diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml
index 0619732..4cddd78 100644
--- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml
@@ -58,9 +58,12 @@
     <title>Description</title>
 
     <note>
-      <title>Experimental</title>
-      <para>This is an <link linkend="experimental">experimental</link>
-      interface and may change in the future.</para>
+      <title>Obsolete</title>
+
+      <para>This is an <link linkend="obsolete">obsolete</link>
+      interface and may be removed in the future. It is superseded by
+      <link linkend="vidioc-subdev-g-selection">the selection
+      API</link>.</para>
     </note>
 
     <para>To retrieve the current crop rectangle applications set the
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 11/35] v4l: Image source control class
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (9 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 10/35] v4l: Mark VIDIOC_SUBDEV_G_CROP and VIDIOC_SUBDEV_S_CROP obsolete Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 12/35] v4l: Image processing " Sakari Ailus
                   ` (23 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add image source control class. This control class is intended to contain
low level controls which deal with control of the image capture process ---
the A/D converter in image sensors, for example.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 Documentation/DocBook/media/v4l/controls.xml       |   86 ++++++++++++++++++++
 .../DocBook/media/v4l/vidioc-g-ext-ctrls.xml       |    6 ++
 drivers/media/video/v4l2-ctrls.c                   |    7 ++
 include/linux/videodev2.h                          |    9 ++
 4 files changed, 108 insertions(+), 0 deletions(-)

diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 3f3d2e2..2257db4 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3438,4 +3438,90 @@ interface and may change in the future.</para>
       </table>
 
     </section>
+
+    <section id="image-source-controls">
+      <title>Image Source Control Reference</title>
+
+      <note>
+	<title>Experimental</title>
+
+	<para>This is an <link
+	linkend="experimental">experimental</link> interface and may
+	change in the future.</para>
+      </note>
+
+      <para>
+	The Image Source control class is intended for low-level
+	control of image source devices such as image sensors. The
+	devices feature an analogue to digital converter and a bus
+	transmitter to transmit the image data out of the device.
+      </para>
+
+      <table pgwide="1" frame="none" id="image-source-control-id">
+      <title>Image Source Control IDs</title>
+
+      <tgroup cols="4">
+	<colspec colname="c1" colwidth="1*" />
+	<colspec colname="c2" colwidth="6*" />
+	<colspec colname="c3" colwidth="2*" />
+	<colspec colname="c4" colwidth="6*" />
+	<spanspec namest="c1" nameend="c2" spanname="id" />
+	<spanspec namest="c2" nameend="c4" spanname="descr" />
+	<thead>
+	  <row>
+	    <entry spanname="id" align="left">ID</entry>
+	    <entry align="left">Type</entry>
+	  </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+	  </row>
+	</thead>
+	<tbody valign="top">
+	  <row><entry></entry></row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_IMAGE_SOURCE_CLASS</constant></entry>
+	    <entry>class</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">The IMAGE_SOURCE class descriptor.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_VBLANK</constant></entry>
+	    <entry>integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Vertical blanking. The idle period
+	    after every frame during which no image data is produced.
+	    The unit of vertical blanking is a line. Every line has
+	    length of the image width plus horizontal blanking at the
+	    pixel rate defined by
+	    <constant>V4L2_CID_PIXEL_RATE</constant> control in the
+	    same sub-device.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_HBLANK</constant></entry>
+	    <entry>integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Horizontal blanking. The idle
+	    period after every line of image data during which no
+	    image data is produced. The unit of horizontal blanking is
+	    pixels.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_ANALOGUE_GAIN</constant></entry>
+	    <entry>integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Analogue gain is gain affecting
+	    all colour components in the pixel matrix. The gain
+	    operation is performed in the analogue domain before A/D
+	    conversion.
+	    </entry>
+	  </row>
+	  <row><entry></entry></row>
+	</tbody>
+      </tgroup>
+      </table>
+
+    </section>
+
 </section>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index b17a7aa..f420034 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -265,6 +265,12 @@ These controls are described in <xref
 These controls are described in <xref
 		linkend="flash-controls" />.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_CTRL_CLASS_IMAGE_SOURCE</constant></entry>
+	    <entry>0x9d0000</entry> <entry>The class containing image
+	    source controls. These controls are described in <xref
+	    linkend="image-source-controls" />.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index f0484bd..3ca6bc7 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -623,6 +623,12 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_FLASH_CHARGE:		return "Charge";
 	case V4L2_CID_FLASH_READY:		return "Ready to Strobe";
 
+	/* Image source controls */
+	case V4L2_CID_IMAGE_SOURCE_CLASS:	return "Image Source Controls";
+	case V4L2_CID_VBLANK:			return "Vertical Blanking";
+	case V4L2_CID_HBLANK:			return "Horizontal Blanking";
+	case V4L2_CID_ANALOGUE_GAIN:		return "Analogue Gain";
+
 	default:
 		return NULL;
 	}
@@ -722,6 +728,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_MPEG_CLASS:
 	case V4L2_CID_FM_TX_CLASS:
 	case V4L2_CID_FLASH_CLASS:
+	case V4L2_CID_IMAGE_SOURCE_CLASS:
 		*type = V4L2_CTRL_TYPE_CTRL_CLASS;
 		/* You can neither read not write these */
 		*flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index e3c6302..ca64202 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1136,6 +1136,7 @@ struct v4l2_ext_controls {
 #define V4L2_CTRL_CLASS_CAMERA 0x009a0000	/* Camera class controls */
 #define V4L2_CTRL_CLASS_FM_TX 0x009b0000	/* FM Modulator control class */
 #define V4L2_CTRL_CLASS_FLASH 0x009c0000	/* Camera flash controls */
+#define V4L2_CTRL_CLASS_IMAGE_SOURCE 0x009d0000	/* Image source controls */
 
 #define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
 #define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
@@ -1762,6 +1763,14 @@ enum v4l2_flash_strobe_source {
 #define V4L2_CID_FLASH_CHARGE			(V4L2_CID_FLASH_CLASS_BASE + 11)
 #define V4L2_CID_FLASH_READY			(V4L2_CID_FLASH_CLASS_BASE + 12)
 
+/* Image source controls */
+#define V4L2_CID_IMAGE_SOURCE_CLASS_BASE	(V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900)
+#define V4L2_CID_IMAGE_SOURCE_CLASS		(V4L2_CTRL_CLASS_IMAGE_SOURCE | 1)
+
+#define V4L2_CID_VBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 1)
+#define V4L2_CID_HBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 2)
+#define V4L2_CID_ANALOGUE_GAIN			(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 3)
+
 /*
  *	T U N I N G
  */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 12/35] v4l: Image processing control class
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (10 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 11/35] v4l: Image source control class Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 13/35] v4l: Document raw bayer 4CC codes Sakari Ailus
                   ` (22 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add control class for image processing controls. The control class deals
with controls processing image, for example digital gain or noise filtering,
which can be present in any part of the pipeline.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 Documentation/DocBook/media/v4l/controls.xml       |   82 ++++++++++++++++++++
 .../DocBook/media/v4l/vidioc-g-ext-ctrls.xml       |    6 ++
 drivers/media/video/v4l2-ctrls.c                   |   13 +++
 include/linux/videodev2.h                          |    8 ++
 4 files changed, 109 insertions(+), 0 deletions(-)

diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 2257db4..4ca03f1 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3524,4 +3524,86 @@ interface and may change in the future.</para>
 
     </section>
 
+    <section id="image-process-controls">
+      <title>Image Process Control Reference</title>
+
+      <note>
+	<title>Experimental</title>
+
+	<para>This is an <link
+	linkend="experimental">experimental</link> interface and may
+	change in the future.</para>
+      </note>
+
+      <para>
+	The Image Source control class is intended for low-level control of
+	image processing functions. Unlike
+	<constant>V4L2_CID_IMAGE_SOURCE_CLASS</constant>, the controls in
+	this class affect processing the image, and do not control capturing
+	of it.
+      </para>
+
+      <table pgwide="1" frame="none" id="image-process-control-id">
+      <title>Image Source Control IDs</title>
+
+      <tgroup cols="4">
+	<colspec colname="c1" colwidth="1*" />
+	<colspec colname="c2" colwidth="6*" />
+	<colspec colname="c3" colwidth="2*" />
+	<colspec colname="c4" colwidth="6*" />
+	<spanspec namest="c1" nameend="c2" spanname="id" />
+	<spanspec namest="c2" nameend="c4" spanname="descr" />
+	<thead>
+	  <row>
+	    <entry spanname="id" align="left">ID</entry>
+	    <entry align="left">Type</entry>
+	  </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+	  </row>
+	</thead>
+	<tbody valign="top">
+	  <row><entry></entry></row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_IMAGE_PROC_CLASS</constant></entry>
+	    <entry>class</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">The IMAGE_PROC class descriptor.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_LINK_FREQ</constant></entry>
+	    <entry>integer menu</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Data bus frequency. Together with the
+	    media bus pixel code, bus type (clock cycles per sample), the
+	    data bus frequency defines the pixel rate
+	    (<constant>V4L2_CID_PIXEL_RATE</constant>) in the
+	    pixel array (or possibly elsewhere, if the device is not an
+	    image sensor). The frame rate can be calculated from the pixel
+	    clock, image width and height and horizontal and vertical
+	    blanking. While the pixel rate control may be defined elsewhere
+	    than in the subdev containing the pixel array, the frame rate
+	    cannot be obtained from that information. This is because only
+	    on the pixel array it can be assumed that the vertical and
+	    horizontal blanking information is exact: no other blanking is
+	    allowed in the pixel array. The selection of frame rate is
+	    performed by selecting the desired horizontal and vertical
+	    blanking. The unit of this control is Hz. </entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_PIXEL_RATE</constant></entry>
+	    <entry>64-bit integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Pixel rate in the source pads of
+	    the subdev. This control is read-only and its unit is
+	    pixels / second.
+	    </entry>
+	  </row>
+	  <row><entry></entry></row>
+	</tbody>
+      </tgroup>
+      </table>
+
+    </section>
 </section>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index f420034..f41a2f5 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -271,6 +271,12 @@ These controls are described in <xref
 	    source controls. These controls are described in <xref
 	    linkend="image-source-controls" />.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_CTRL_CLASS_IMAGE_PROC</constant></entry>
+	    <entry>0x9e0000</entry> <entry>The class containing image
+	    processing controls. These controls are described in <xref
+	    linkend="image-process-controls" />.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 3ca6bc7..1cbf97f 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -629,6 +629,11 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_HBLANK:			return "Horizontal Blanking";
 	case V4L2_CID_ANALOGUE_GAIN:		return "Analogue Gain";
 
+	/* Image processing controls */
+	case V4L2_CID_IMAGE_PROC_CLASS:		return "Image Processing Controls";
+	case V4L2_CID_LINK_FREQ:		return "Link Frequency";
+	case V4L2_CID_PIXEL_RATE:		return "Pixel Rate";
+
 	default:
 		return NULL;
 	}
@@ -719,6 +724,9 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
 		*type = V4L2_CTRL_TYPE_MENU;
 		break;
+	case V4L2_CID_LINK_FREQ:
+		*type = V4L2_CTRL_TYPE_INTEGER_MENU;
+		break;
 	case V4L2_CID_RDS_TX_PS_NAME:
 	case V4L2_CID_RDS_TX_RADIO_TEXT:
 		*type = V4L2_CTRL_TYPE_STRING;
@@ -729,6 +737,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_FM_TX_CLASS:
 	case V4L2_CID_FLASH_CLASS:
 	case V4L2_CID_IMAGE_SOURCE_CLASS:
+	case V4L2_CID_IMAGE_PROC_CLASS:
 		*type = V4L2_CTRL_TYPE_CTRL_CLASS;
 		/* You can neither read not write these */
 		*flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
@@ -754,6 +763,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 		*type = V4L2_CTRL_TYPE_INTEGER64;
 		*flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_VOLATILE;
 		break;
+	case V4L2_CID_PIXEL_RATE:
+		*type = V4L2_CTRL_TYPE_INTEGER64;
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		break;
 	default:
 		*type = V4L2_CTRL_TYPE_INTEGER;
 		break;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index ca64202..f46350e 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1137,6 +1137,7 @@ struct v4l2_ext_controls {
 #define V4L2_CTRL_CLASS_FM_TX 0x009b0000	/* FM Modulator control class */
 #define V4L2_CTRL_CLASS_FLASH 0x009c0000	/* Camera flash controls */
 #define V4L2_CTRL_CLASS_IMAGE_SOURCE 0x009d0000	/* Image source controls */
+#define V4L2_CTRL_CLASS_IMAGE_PROC 0x009e0000	/* Image processing controls */
 
 #define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
 #define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
@@ -1771,6 +1772,13 @@ enum v4l2_flash_strobe_source {
 #define V4L2_CID_HBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 2)
 #define V4L2_CID_ANALOGUE_GAIN			(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 3)
 
+/* Image processing controls */
+#define V4L2_CID_IMAGE_PROC_CLASS_BASE		(V4L2_CTRL_CLASS_IMAGE_PROC | 0x900)
+#define V4L2_CID_IMAGE_PROC_CLASS		(V4L2_CTRL_CLASS_IMAGE_PROC | 1)
+
+#define V4L2_CID_LINK_FREQ			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 1)
+#define V4L2_CID_PIXEL_RATE			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 2)
+
 /*
  *	T U N I N G
  */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 13/35] v4l: Document raw bayer 4CC codes
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (11 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 12/35] v4l: Image processing " Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 14/35] v4l: Add DPCM compressed raw bayer pixel formats Sakari Ailus
                   ` (21 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Document guidelines how 4CC codes should be named. Only raw bayer is
included currently. Other formats should be documented later on.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 Documentation/video4linux/4CCs.txt |   32 ++++++++++++++++++++++++++++++++
 1 files changed, 32 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/video4linux/4CCs.txt

diff --git a/Documentation/video4linux/4CCs.txt b/Documentation/video4linux/4CCs.txt
new file mode 100644
index 0000000..41241af
--- /dev/null
+++ b/Documentation/video4linux/4CCs.txt
@@ -0,0 +1,32 @@
+Guidelines for Linux4Linux pixel format 4CCs
+============================================
+
+Guidelines for Video4Linux 4CC codes defined using v4l2_fourcc() are
+specified in this document. First of the characters defines the nature of
+the pixel format, compression and colour space. The interpretation of the
+other three characters depends on the first one.
+
+Existing 4CCs may not obey these guidelines.
+
+Formats
+=======
+
+Raw bayer
+---------
+
+The following first characters are used by raw bayer formats:
+
+	B: raw bayer, uncompressed
+	b: raw bayer, DPCM compressed
+	a: A-law compressed
+	u: u-law compressed
+
+2nd character: pixel order
+	B: BGGR
+	G: GBRG
+	g: GRBG
+	R: RGGB
+
+3rd character: uncompressed bits-per-pixel 0--9, A--
+
+4th character: compressed bits-per-pixel 0--9, A--
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 14/35] v4l: Add DPCM compressed raw bayer pixel formats
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (12 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 13/35] v4l: Document raw bayer 4CC codes Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-21  9:37   ` Prabhakar Lad
  2012-03-06 16:32 ` [PATCH v5 15/35] media: Add link_validate() op to check links to the sink pad Sakari Ailus
                   ` (20 subsequent siblings)
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add three other colour orders for 10-bit to 8-bit DPCM compressed raw bayer
pixel formats.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 Documentation/DocBook/media/v4l/pixfmt-srggb10.xml |    2 +-
 .../DocBook/media/v4l/pixfmt-srggb10dpcm8.xml      |   29 ++++++++++++++++++++
 Documentation/DocBook/media/v4l/pixfmt.xml         |    1 +
 include/linux/videodev2.h                          |    3 ++
 4 files changed, 34 insertions(+), 1 deletions(-)
 create mode 100644 Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml

diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
index 7b27409..c1c62a9 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
@@ -1,4 +1,4 @@
-    <refentry>
+    <refentry id="pixfmt-srggb10">
       <refmeta>
 	<refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'),
 	 V4L2_PIX_FMT_SGRBG10 ('BA10'),
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
new file mode 100644
index 0000000..80937f1
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
@@ -0,0 +1,29 @@
+    <refentry>
+      <refmeta>
+	<refentrytitle>
+	 V4L2_PIX_FMT_SRGGB10DPCM8 ('bBA8'),
+	 V4L2_PIX_FMT_SGBRG10DPCM8 ('bGA8'),
+	 V4L2_PIX_FMT_SGRBG10DPCM8 ('BD10'),
+	 V4L2_PIX_FMT_SBGGR10DPCM8 ('bRA8'),
+	 </refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname id="V4L2-PIX-FMT-SRGGB10DPCM8"><constant>V4L2_PIX_FMT_SRGGB10DPCM8</constant></refname>
+	<refname id="V4L2-PIX-FMT-SGBRG10DPCM8"><constant>V4L2_PIX_FMT_SGBRG10DPCM8</constant></refname>
+	<refname id="V4L2-PIX-FMT-SGRBG10DPCM8"><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></refname>
+	<refname id="V4L2-PIX-FMT-SBGGR10DPCM8"><constant>V4L2_PIX_FMT_SBGGR10DPCM8</constant></refname>
+	<refpurpose>10-bit Bayer formats compressed to 8 bits</refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>The following four pixel formats are raw sRGB / Bayer formats
+	with 10 bits per colour compressed to 8 bits each, using DPCM
+	compression. DPCM, differential pulse-code modulation, is lossy.
+	Each colour component consumes 8 bits of memory. In other respects
+	this format is similar to <xref
+	linkend="pixfmt-srggb10">.</xref></para>
+
+      </refsect1>
+    </refentry>
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index 31eaae2..74d4fcd 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
     &sub-srggb8;
     &sub-sbggr16;
     &sub-srggb10;
+    &sub-srggb10dpcm8;
     &sub-srggb12;
   </section>
 
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index f46350e..76f3153 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -378,7 +378,10 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
 #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
 	/* 10bit raw bayer DPCM compressed to 8 bits */
+#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
+#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
 #define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
+#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
 	/*
 	 * 10bit raw bayer, expanded to 16 bits
 	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 14/35] v4l: Add DPCM compressed raw bayer pixel formats
  2012-03-06 16:32 ` [PATCH v5 14/35] v4l: Add DPCM compressed raw bayer pixel formats Sakari Ailus
@ 2012-03-21  9:37   ` Prabhakar Lad
  2012-03-21  9:53     ` Sakari Ailus
  2012-03-21 11:44     ` [PATCH v5.5 14/40] " Sakari Ailus
  0 siblings, 2 replies; 93+ messages in thread
From: Prabhakar Lad @ 2012-03-21  9:37 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Sakari,

On Tue, Mar 6, 2012 at 10:02 PM, Sakari Ailus <sakari.ailus@iki.fi> wrote:
>
> Add three other colour orders for 10-bit to 8-bit DPCM compressed raw
> bayer
> pixel formats.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
>  Documentation/DocBook/media/v4l/pixfmt-srggb10.xml |    2 +-
>  .../DocBook/media/v4l/pixfmt-srggb10dpcm8.xml      |   29
> ++++++++++++++++++++
>  Documentation/DocBook/media/v4l/pixfmt.xml         |    1 +
>  include/linux/videodev2.h                          |    3 ++
>  4 files changed, 34 insertions(+), 1 deletions(-)
>  create mode 100644
> Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
>
> diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
> b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
> index 7b27409..c1c62a9 100644
> --- a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
> +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
> @@ -1,4 +1,4 @@
> -    <refentry>
> +    <refentry id="pixfmt-srggb10">
>       <refmeta>
>        <refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'),
>         V4L2_PIX_FMT_SGRBG10 ('BA10'),
> diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
> b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
> new file mode 100644
> index 0000000..80937f1
> --- /dev/null
> +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
> @@ -0,0 +1,29 @@
> +    <refentry>
> +      <refmeta>
> +       <refentrytitle>
> +        V4L2_PIX_FMT_SRGGB10DPCM8 ('bBA8'),
> +        V4L2_PIX_FMT_SGBRG10DPCM8 ('bGA8'),
> +        V4L2_PIX_FMT_SGRBG10DPCM8 ('BD10'),
> +        V4L2_PIX_FMT_SBGGR10DPCM8 ('bRA8'),
> +        </refentrytitle>

You missed here to change as per the 4CC code documentation.

Regards,
--Prabhakar Lad

> +       &manvol;
> +      </refmeta>
> +      <refnamediv>
> +       <refname
> id="V4L2-PIX-FMT-SRGGB10DPCM8"><constant>V4L2_PIX_FMT_SRGGB10DPCM8</constant></refname>
> +       <refname
> id="V4L2-PIX-FMT-SGBRG10DPCM8"><constant>V4L2_PIX_FMT_SGBRG10DPCM8</constant></refname>
> +       <refname
> id="V4L2-PIX-FMT-SGRBG10DPCM8"><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></refname>
> +       <refname
> id="V4L2-PIX-FMT-SBGGR10DPCM8"><constant>V4L2_PIX_FMT_SBGGR10DPCM8</constant></refname>
> +       <refpurpose>10-bit Bayer formats compressed to 8 bits</refpurpose>
> +      </refnamediv>
> +      <refsect1>
> +       <title>Description</title>
> +
> +       <para>The following four pixel formats are raw sRGB / Bayer
> formats
> +       with 10 bits per colour compressed to 8 bits each, using DPCM
> +       compression. DPCM, differential pulse-code modulation, is lossy.
> +       Each colour component consumes 8 bits of memory. In other respects
> +       this format is similar to <xref
> +       linkend="pixfmt-srggb10">.</xref></para>
> +
> +      </refsect1>
> +    </refentry>
> diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml
> b/Documentation/DocBook/media/v4l/pixfmt.xml
> index 31eaae2..74d4fcd 100644
> --- a/Documentation/DocBook/media/v4l/pixfmt.xml
> +++ b/Documentation/DocBook/media/v4l/pixfmt.xml
> @@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of
> the Linux framebuffer API.<
>     &sub-srggb8;
>     &sub-sbggr16;
>     &sub-srggb10;
> +    &sub-srggb10dpcm8;
>     &sub-srggb12;
>   </section>
>
> diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
> index f46350e..76f3153 100644
> --- a/include/linux/videodev2.h
> +++ b/include/linux/videodev2.h
> @@ -378,7 +378,10 @@ struct v4l2_pix_format {
>  #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12
>  GRGR.. BGBG.. */
>  #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12
>  RGRG.. GBGB.. */
>        /* 10bit raw bayer DPCM compressed to 8 bits */
> +#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
> +#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
>  #define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
> +#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
>        /*
>         * 10bit raw bayer, expanded to 16 bits
>         * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
> --
> 1.7.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 14/35] v4l: Add DPCM compressed raw bayer pixel formats
  2012-03-21  9:37   ` Prabhakar Lad
@ 2012-03-21  9:53     ` Sakari Ailus
  2012-03-21 11:44     ` [PATCH v5.5 14/40] " Sakari Ailus
  1 sibling, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-21  9:53 UTC (permalink / raw)
  To: Prabhakar Lad
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Prabhakar,

Prabhakar Lad wrote:
> On Tue, Mar 6, 2012 at 10:02 PM, Sakari Ailus<sakari.ailus@iki.fi>  wrote:
...
>> diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
>> b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
>> new file mode 100644
>> index 0000000..80937f1
>> --- /dev/null
>> +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
>> @@ -0,0 +1,29 @@
>> +<refentry>
>> +<refmeta>
>> +<refentrytitle>
>> +        V4L2_PIX_FMT_SRGGB10DPCM8 ('bBA8'),
>> +        V4L2_PIX_FMT_SGBRG10DPCM8 ('bGA8'),
>> +        V4L2_PIX_FMT_SGRBG10DPCM8 ('BD10'),
>> +        V4L2_PIX_FMT_SBGGR10DPCM8 ('bRA8'),
>> +</refentrytitle>
>
> You missed here to change as per the 4CC code documentation.

Thanks!

-- 
Sakari Ailus
sakari.ailus@iki.fi

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.5 14/40] v4l: Add DPCM compressed raw bayer pixel formats
  2012-03-21  9:37   ` Prabhakar Lad
  2012-03-21  9:53     ` Sakari Ailus
@ 2012-03-21 11:44     ` Sakari Ailus
  2012-03-21 12:08       ` Prabhakar Lad
  1 sibling, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-21 11:44 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani, prabhakar.csengg

Add three other colour orders for 10-bit to 8-bit DPCM compressed raw bayer
pixel formats.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 Documentation/DocBook/media/v4l/pixfmt-srggb10.xml |    2 +-
 .../DocBook/media/v4l/pixfmt-srggb10dpcm8.xml      |   29 ++++++++++++++++++++
 Documentation/DocBook/media/v4l/pixfmt.xml         |    1 +
 include/linux/videodev2.h                          |    3 ++
 4 files changed, 34 insertions(+), 1 deletions(-)
 create mode 100644 Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml

diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
index 7b27409..c1c62a9 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
@@ -1,4 +1,4 @@
-    <refentry>
+    <refentry id="pixfmt-srggb10">
       <refmeta>
 	<refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'),
 	 V4L2_PIX_FMT_SGRBG10 ('BA10'),
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
new file mode 100644
index 0000000..5b2b03c
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
@@ -0,0 +1,29 @@
+    <refentry>
+      <refmeta>
+	<refentrytitle>
+	 V4L2_PIX_FMT_SBGGR10DPCM8 ('bBA8'),
+	 V4L2_PIX_FMT_SGBRG10DPCM8 ('bGA8'),
+	 V4L2_PIX_FMT_SGRBG10DPCM8 ('BD10'),
+	 V4L2_PIX_FMT_SRGGB10DPCM8 ('bRA8'),
+	 </refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname id="V4L2-PIX-FMT-SBGGR10DPCM8"><constant>V4L2_PIX_FMT_SBGGR10DPCM8</constant></refname>
+	<refname id="V4L2-PIX-FMT-SGBRG10DPCM8"><constant>V4L2_PIX_FMT_SGBRG10DPCM8</constant></refname>
+	<refname id="V4L2-PIX-FMT-SGRBG10DPCM8"><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></refname>
+	<refname id="V4L2-PIX-FMT-SRGGB10DPCM8"><constant>V4L2_PIX_FMT_SRGGB10DPCM8</constant></refname>
+	<refpurpose>10-bit Bayer formats compressed to 8 bits</refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>The following four pixel formats are raw sRGB / Bayer formats
+	with 10 bits per colour compressed to 8 bits each, using DPCM
+	compression. DPCM, differential pulse-code modulation, is lossy.
+	Each colour component consumes 8 bits of memory. In other respects
+	this format is similar to <xref
+	linkend="pixfmt-srggb10">.</xref></para>
+
+      </refsect1>
+    </refentry>
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index 31eaae2..74d4fcd 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
     &sub-srggb8;
     &sub-sbggr16;
     &sub-srggb10;
+    &sub-srggb10dpcm8;
     &sub-srggb12;
   </section>
 
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 0805259..dbc0d77 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -378,7 +378,10 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
 #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
 	/* 10bit raw bayer DPCM compressed to 8 bits */
+#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
+#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
 #define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
+#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
 	/*
 	 * 10bit raw bayer, expanded to 16 bits
 	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.5 14/40] v4l: Add DPCM compressed raw bayer pixel formats
  2012-03-21 11:44     ` [PATCH v5.5 14/40] " Sakari Ailus
@ 2012-03-21 12:08       ` Prabhakar Lad
  0 siblings, 0 replies; 93+ messages in thread
From: Prabhakar Lad @ 2012-03-21 12:08 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

On Wed, Mar 21, 2012 at 5:14 PM, Sakari Ailus <sakari.ailus@iki.fi> wrote:
>
> Add three other colour orders for 10-bit to 8-bit DPCM compressed raw
> bayer
> pixel formats.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
> ---
>  Documentation/DocBook/media/v4l/pixfmt-srggb10.xml |    2 +-
>  .../DocBook/media/v4l/pixfmt-srggb10dpcm8.xml      |   29
> ++++++++++++++++++++
>  Documentation/DocBook/media/v4l/pixfmt.xml         |    1 +
>  include/linux/videodev2.h                          |    3 ++
>  4 files changed, 34 insertions(+), 1 deletions(-)
>  create mode 100644
> Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
>
> diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
> b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
> index 7b27409..c1c62a9 100644
> --- a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
> +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
> @@ -1,4 +1,4 @@
> -    <refentry>
> +    <refentry id="pixfmt-srggb10">
>       <refmeta>
>        <refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'),
>         V4L2_PIX_FMT_SGRBG10 ('BA10'),
> diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
> b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
> new file mode 100644
> index 0000000..5b2b03c
> --- /dev/null
> +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
> @@ -0,0 +1,29 @@
> +    <refentry>
> +      <refmeta>
> +       <refentrytitle>
> +        V4L2_PIX_FMT_SBGGR10DPCM8 ('bBA8'),
> +        V4L2_PIX_FMT_SGBRG10DPCM8 ('bGA8'),
> +        V4L2_PIX_FMT_SGRBG10DPCM8 ('BD10'),
> +        V4L2_PIX_FMT_SRGGB10DPCM8 ('bRA8'),
> +        </refentrytitle>
> +       &manvol;
> +      </refmeta>
> +      <refnamediv>
> +       <refname
> id="V4L2-PIX-FMT-SBGGR10DPCM8"><constant>V4L2_PIX_FMT_SBGGR10DPCM8</constant></refname>
> +       <refname
> id="V4L2-PIX-FMT-SGBRG10DPCM8"><constant>V4L2_PIX_FMT_SGBRG10DPCM8</constant></refname>
> +       <refname
> id="V4L2-PIX-FMT-SGRBG10DPCM8"><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></refname>
> +       <refname
> id="V4L2-PIX-FMT-SRGGB10DPCM8"><constant>V4L2_PIX_FMT_SRGGB10DPCM8</constant></refname>
> +       <refpurpose>10-bit Bayer formats compressed to 8 bits</refpurpose>
> +      </refnamediv>
> +      <refsect1>
> +       <title>Description</title>
> +
> +       <para>The following four pixel formats are raw sRGB / Bayer
> formats
> +       with 10 bits per colour compressed to 8 bits each, using DPCM
> +       compression. DPCM, differential pulse-code modulation, is lossy.
> +       Each colour component consumes 8 bits of memory. In other respects
> +       this format is similar to <xref
> +       linkend="pixfmt-srggb10">.</xref></para>
> +
> +      </refsect1>
> +    </refentry>
> diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml
> b/Documentation/DocBook/media/v4l/pixfmt.xml
> index 31eaae2..74d4fcd 100644
> --- a/Documentation/DocBook/media/v4l/pixfmt.xml
> +++ b/Documentation/DocBook/media/v4l/pixfmt.xml
> @@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of
> the Linux framebuffer API.<
>     &sub-srggb8;
>     &sub-sbggr16;
>     &sub-srggb10;
> +    &sub-srggb10dpcm8;
>     &sub-srggb12;
>   </section>
>
> diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
> index 0805259..dbc0d77 100644
> --- a/include/linux/videodev2.h
> +++ b/include/linux/videodev2.h
> @@ -378,7 +378,10 @@ struct v4l2_pix_format {
>  #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12
>  GRGR.. BGBG.. */
>  #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12
>  RGRG.. GBGB.. */
>        /* 10bit raw bayer DPCM compressed to 8 bits */
> +#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
> +#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
>  #define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
> +#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
>        /*
>         * 10bit raw bayer, expanded to 16 bits
>         * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
> --
> 1.7.2.5
>

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 15/35] media: Add link_validate() op to check links to the sink pad
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (13 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 14/35] v4l: Add DPCM compressed raw bayer pixel formats Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 16/35] v4l: Improve sub-device documentation for pad ops Sakari Ailus
                   ` (19 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

The purpose of the link_validate() op is to allow an entity driver to ensure
that the properties of the pads at the both ends of the link are suitable
for starting the pipeline. link_validate is called on sink pads on active
links which belong to the active part of the graph.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/media-framework.txt |   19 ++++++++++++++
 drivers/media/media-entity.c      |   50 +++++++++++++++++++++++++++++++++++-
 include/media/media-entity.h      |    5 ++-
 3 files changed, 70 insertions(+), 4 deletions(-)

diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt
index 3a0f879..8028754 100644
--- a/Documentation/media-framework.txt
+++ b/Documentation/media-framework.txt
@@ -335,6 +335,9 @@ the media_entity pipe field.
 Calls to media_entity_pipeline_start() can be nested. The pipeline pointer must
 be identical for all nested calls to the function.
 
+media_entity_pipeline_start() may return an error. In that case, it will
+clean up any the changes it did by itself.
+
 When stopping the stream, drivers must notify the entities with
 
 	media_entity_pipeline_stop(struct media_entity *entity);
@@ -351,3 +354,19 @@ If other operations need to be disallowed on streaming entities (such as
 changing entities configuration parameters) drivers can explicitly check the
 media_entity stream_count field to find out if an entity is streaming. This
 operation must be done with the media_device graph_mutex held.
+
+
+Link validation
+---------------
+
+Link validation is performed by media_entity_pipeline_start() for any
+entity which has sink pads in the pipeline. The
+media_entity::link_validate() callback is used for that purpose. In
+link_validate() callback, entity driver should check that the properties of
+the source pad of the connected entity and its own sink pad match. It is up
+to the type of the entity (and in the end, the properties of the hardware)
+what matching actually means.
+
+Subsystems should facilitate link validation by providing subsystem specific
+helper functions to provide easy access for commonly needed information, and
+in the end provide a way to use driver-specific callbacks.
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 056138f..d6d0e81 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -214,23 +214,69 @@ EXPORT_SYMBOL_GPL(media_entity_graph_walk_next);
  * pipeline pointer must be identical for all nested calls to
  * media_entity_pipeline_start().
  */
-void media_entity_pipeline_start(struct media_entity *entity,
-				 struct media_pipeline *pipe)
+__must_check int media_entity_pipeline_start(struct media_entity *entity,
+					     struct media_pipeline *pipe)
 {
 	struct media_device *mdev = entity->parent;
 	struct media_entity_graph graph;
+	struct media_entity *entity_err = entity;
+	int ret;
 
 	mutex_lock(&mdev->graph_mutex);
 
 	media_entity_graph_walk_start(&graph, entity);
 
 	while ((entity = media_entity_graph_walk_next(&graph))) {
+		unsigned int i;
+
 		entity->stream_count++;
 		WARN_ON(entity->pipe && entity->pipe != pipe);
 		entity->pipe = pipe;
+
+		/* Already streaming --- no need to check. */
+		if (entity->stream_count > 1)
+			continue;
+
+		if (!entity->ops || !entity->ops->link_validate)
+			continue;
+
+		for (i = 0; i < entity->num_links; i++) {
+			struct media_link *link = &entity->links[i];
+
+			/* Is this pad part of an enabled link? */
+			if (!(link->flags & MEDIA_LNK_FL_ENABLED))
+				continue;
+
+			/* Are we the sink or not? */
+			if (link->sink->entity != entity)
+				continue;
+
+			ret = entity->ops->link_validate(link);
+			if (ret < 0 && ret != -ENOIOCTLCMD)
+				goto error;
+		}
 	}
 
 	mutex_unlock(&mdev->graph_mutex);
+
+	return 0;
+
+error:
+	/*
+	 * Link validation on graph failed. We revert what we did and
+	 * return the error.
+	 */
+	media_entity_graph_walk_start(&graph, entity_err);
+
+	while ((entity_err = media_entity_graph_walk_next(&graph))) {
+		entity_err->stream_count--;
+		if (entity_err->stream_count == 0)
+			entity_err->pipe = NULL;
+	}
+
+	mutex_unlock(&mdev->graph_mutex);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(media_entity_pipeline_start);
 
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 29e7bba..0c16f51 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -46,6 +46,7 @@ struct media_entity_operations {
 	int (*link_setup)(struct media_entity *entity,
 			  const struct media_pad *local,
 			  const struct media_pad *remote, u32 flags);
+	int (*link_validate)(struct media_link *link);
 };
 
 struct media_entity {
@@ -140,8 +141,8 @@ void media_entity_graph_walk_start(struct media_entity_graph *graph,
 		struct media_entity *entity);
 struct media_entity *
 media_entity_graph_walk_next(struct media_entity_graph *graph);
-void media_entity_pipeline_start(struct media_entity *entity,
-		struct media_pipeline *pipe);
+__must_check int media_entity_pipeline_start(struct media_entity *entity,
+					     struct media_pipeline *pipe);
 void media_entity_pipeline_stop(struct media_entity *entity);
 
 #define media_entity_call(entity, operation, args...)			\
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 16/35] v4l: Improve sub-device documentation for pad ops
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (14 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 15/35] media: Add link_validate() op to check links to the sink pad Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 17/35] v4l: Implement v4l2_subdev_link_validate() Sakari Ailus
                   ` (18 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Document that format related configuration is done through pad ops in case
the driver does use the media framework.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/video4linux/v4l2-framework.txt |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index 659b2ba..f06c563 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -262,11 +262,16 @@ struct v4l2_subdev_video_ops {
 	...
 };
 
+struct v4l2_subdev_pad_ops {
+	...
+};
+
 struct v4l2_subdev_ops {
 	const struct v4l2_subdev_core_ops  *core;
 	const struct v4l2_subdev_tuner_ops *tuner;
 	const struct v4l2_subdev_audio_ops *audio;
 	const struct v4l2_subdev_video_ops *video;
+	const struct v4l2_subdev_pad_ops *video;
 };
 
 The core ops are common to all subdevs, the other categories are implemented
@@ -303,6 +308,10 @@ Don't forget to cleanup the media entity before the sub-device is destroyed:
 
 	media_entity_cleanup(&sd->entity);
 
+If the subdev driver intends to process video and integrate with the media
+framework, it must implement format related functionality using
+v4l2_subdev_pad_ops instead of v4l2_subdev_video_ops.
+
 A device (bridge) driver needs to register the v4l2_subdev with the
 v4l2_device:
 
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 17/35] v4l: Implement v4l2_subdev_link_validate()
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (15 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 16/35] v4l: Improve sub-device documentation for pad ops Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-03-06 16:32 ` [PATCH v5 18/35] v4l: Allow changing control handler lock Sakari Ailus
                   ` (17 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

v4l2_subdev_link_validate() is the default op for validating a link. In V4L2
subdev context, it is used to call a pad op which performs the proper link
check without much extra work.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/video4linux/v4l2-framework.txt |   12 +++++
 drivers/media/video/v4l2-subdev.c            |   64 ++++++++++++++++++++++++++
 include/media/v4l2-subdev.h                  |   12 +++++
 3 files changed, 88 insertions(+), 0 deletions(-)

diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index f06c563..9d341bc 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -312,6 +312,18 @@ If the subdev driver intends to process video and integrate with the media
 framework, it must implement format related functionality using
 v4l2_subdev_pad_ops instead of v4l2_subdev_video_ops.
 
+In that case, the subdev driver may set the link_validate field to provide
+its own link validation function. The link validation function is called for
+every link in the pipeline where both of the ends of the links are V4L2
+sub-devices. The driver is still responsible for validating the correctness
+of the format configuration between sub-devices and video nodes.
+
+If link_validate op is not set, the default function
+v4l2_subdev_link_validate_default() is used instead. This function ensures
+that width, height and the media bus pixel code are equal on both source and
+sink of the link. Subdev drivers are also free to use this function to
+perform the checks mentioned above in addition to their own checks.
+
 A device (bridge) driver needs to register the v4l2_subdev with the
 v4l2_device:
 
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index eda34cd..507cde2 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -387,6 +387,70 @@ const struct v4l2_file_operations v4l2_subdev_fops = {
 	.poll = subdev_poll,
 };
 
+#ifdef CONFIG_MEDIA_CONTROLLER
+int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd,
+				      struct media_link *link,
+				      struct v4l2_subdev_format *source_fmt,
+				      struct v4l2_subdev_format *sink_fmt)
+{
+	if (source_fmt->format.width != sink_fmt->format.width
+	    || source_fmt->format.height != sink_fmt->format.height
+	    || source_fmt->format.code != sink_fmt->format.code)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(v4l2_subdev_link_validate_default);
+
+static int
+v4l2_subdev_link_validate_get_format(struct media_pad *pad,
+				     struct v4l2_subdev_format *fmt)
+{
+	switch (media_entity_type(pad->entity)) {
+	case MEDIA_ENT_T_V4L2_SUBDEV:
+		fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE;
+		fmt->pad = pad->index;
+		return v4l2_subdev_call(media_entity_to_v4l2_subdev(
+						pad->entity),
+					pad, get_fmt, NULL, fmt);
+	default:
+		WARN(1, "Driver bug! Wrong media entity type %d, entity %s\n",
+		     media_entity_type(pad->entity), pad->entity->name);
+		/* Fall through */
+	case MEDIA_ENT_T_DEVNODE_V4L:
+		return -EINVAL;
+	}
+}
+
+int v4l2_subdev_link_validate(struct media_link *link)
+{
+	struct v4l2_subdev *sink;
+	struct v4l2_subdev_format sink_fmt, source_fmt;
+	int rval;
+
+	rval = v4l2_subdev_link_validate_get_format(
+		link->source, &source_fmt);
+	if (rval < 0)
+		return 0;
+
+	rval = v4l2_subdev_link_validate_get_format(
+		link->sink, &sink_fmt);
+	if (rval < 0)
+		return 0;
+
+	sink = media_entity_to_v4l2_subdev(link->sink->entity);
+
+	rval = v4l2_subdev_call(sink, pad, link_validate, link,
+				&source_fmt, &sink_fmt);
+	if (rval != -ENOIOCTLCMD)
+		return rval;
+
+	return v4l2_subdev_link_validate_default(
+		sink, link, &source_fmt, &sink_fmt);
+}
+EXPORT_SYMBOL_GPL(v4l2_subdev_link_validate);
+#endif /* CONFIG_MEDIA_CONTROLLER */
+
 void v4l2_subdev_init(struct v4l2_subdev *sd, const struct v4l2_subdev_ops *ops)
 {
 	INIT_LIST_HEAD(&sd->list);
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 7e85035..1c2318b 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -470,6 +470,11 @@ struct v4l2_subdev_pad_ops {
 			     struct v4l2_subdev_selection *sel);
 	int (*set_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 			     struct v4l2_subdev_selection *sel);
+#ifdef CONFIG_MEDIA_CONTROLLER
+	int (*link_validate)(struct v4l2_subdev *sd, struct media_link *link,
+			     struct v4l2_subdev_format *source_fmt,
+			     struct v4l2_subdev_format *sink_fmt);
+#endif /* CONFIG_MEDIA_CONTROLLER */
 };
 
 struct v4l2_subdev_ops {
@@ -602,6 +607,13 @@ static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd)
 	return sd->host_priv;
 }
 
+#ifdef CONFIG_MEDIA_CONTROLLER
+int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd,
+				      struct media_link *link,
+				      struct v4l2_subdev_format *source_fmt,
+				      struct v4l2_subdev_format *sink_fmt);
+int v4l2_subdev_link_validate(struct media_link *link);
+#endif /* CONFIG_MEDIA_CONTROLLER */
 void v4l2_subdev_init(struct v4l2_subdev *sd,
 		      const struct v4l2_subdev_ops *ops);
 
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 18/35] v4l: Allow changing control handler lock
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (16 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 17/35] v4l: Implement v4l2_subdev_link_validate() Sakari Ailus
@ 2012-03-06 16:32 ` Sakari Ailus
  2012-05-14 15:27   ` Sylwester Nawrocki
  2012-03-06 16:33 ` [PATCH v5 19/35] omap3isp: Support additional in-memory compressed bayer formats Sakari Ailus
                   ` (16 subsequent siblings)
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:32 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Allow choosing the lock used by the control handler. This may be handy
sometimes when a driver providing multiple subdevs does not want to use
several locks to serialise its functions.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/adp1653.c    |    8 +++---
 drivers/media/video/v4l2-ctrls.c |   39 +++++++++++++++++++------------------
 drivers/media/video/vivi.c       |    4 +-
 include/media/v4l2-ctrls.h       |    9 +++++--
 4 files changed, 32 insertions(+), 28 deletions(-)

diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c
index 12eedf4..becaba4 100644
--- a/drivers/media/video/adp1653.c
+++ b/drivers/media/video/adp1653.c
@@ -283,19 +283,19 @@ adp1653_init_device(struct adp1653_flash *flash)
 		return -EIO;
 	}
 
-	mutex_lock(&flash->ctrls.lock);
+	mutex_lock(flash->ctrls.lock);
 	/* Reset faults before reading new ones. */
 	flash->fault = 0;
 	rval = adp1653_get_fault(flash);
-	mutex_unlock(&flash->ctrls.lock);
+	mutex_unlock(flash->ctrls.lock);
 	if (rval > 0) {
 		dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval);
 		return -EIO;
 	}
 
-	mutex_lock(&flash->ctrls.lock);
+	mutex_lock(flash->ctrls.lock);
 	rval = adp1653_update_hw(flash);
-	mutex_unlock(&flash->ctrls.lock);
+	mutex_unlock(flash->ctrls.lock);
 	if (rval) {
 		dev_err(&client->dev,
 			"adp1653_update_hw failed at %s\n", __func__);
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 1cbf97f..c38055f 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -1153,7 +1153,8 @@ static inline int handler_set_err(struct v4l2_ctrl_handler *hdl, int err)
 int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl,
 			   unsigned nr_of_controls_hint)
 {
-	mutex_init(&hdl->lock);
+	hdl->lock = &hdl->_lock;
+	mutex_init(hdl->lock);
 	INIT_LIST_HEAD(&hdl->ctrls);
 	INIT_LIST_HEAD(&hdl->ctrl_refs);
 	hdl->nr_of_buckets = 1 + nr_of_controls_hint / 8;
@@ -1174,7 +1175,7 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
 	if (hdl == NULL || hdl->buckets == NULL)
 		return;
 
-	mutex_lock(&hdl->lock);
+	mutex_lock(hdl->lock);
 	/* Free all nodes */
 	list_for_each_entry_safe(ref, next_ref, &hdl->ctrl_refs, node) {
 		list_del(&ref->node);
@@ -1191,7 +1192,7 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
 	hdl->buckets = NULL;
 	hdl->cached = NULL;
 	hdl->error = 0;
-	mutex_unlock(&hdl->lock);
+	mutex_unlock(hdl->lock);
 }
 EXPORT_SYMBOL(v4l2_ctrl_handler_free);
 
@@ -1256,9 +1257,9 @@ static struct v4l2_ctrl_ref *find_ref_lock(
 	struct v4l2_ctrl_ref *ref = NULL;
 
 	if (hdl) {
-		mutex_lock(&hdl->lock);
+		mutex_lock(hdl->lock);
 		ref = find_ref(hdl, id);
-		mutex_unlock(&hdl->lock);
+		mutex_unlock(hdl->lock);
 	}
 	return ref;
 }
@@ -1305,7 +1306,7 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
 
 	INIT_LIST_HEAD(&new_ref->node);
 
-	mutex_lock(&hdl->lock);
+	mutex_lock(hdl->lock);
 
 	/* Add immediately at the end of the list if the list is empty, or if
 	   the last element in the list has a lower ID.
@@ -1335,7 +1336,7 @@ insert_in_hash:
 	hdl->buckets[bucket] = new_ref;
 
 unlock:
-	mutex_unlock(&hdl->lock);
+	mutex_unlock(hdl->lock);
 	return 0;
 }
 
@@ -1421,9 +1422,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 		kfree(ctrl);
 		return NULL;
 	}
-	mutex_lock(&hdl->lock);
+	mutex_lock(hdl->lock);
 	list_add_tail(&ctrl->node, &hdl->ctrls);
-	mutex_unlock(&hdl->lock);
+	mutex_unlock(hdl->lock);
 	return ctrl;
 }
 
@@ -1540,7 +1541,7 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
 		return 0;
 	if (hdl->error)
 		return hdl->error;
-	mutex_lock(&add->lock);
+	mutex_lock(add->lock);
 	list_for_each_entry(ctrl, &add->ctrls, node) {
 		/* Skip handler-private controls. */
 		if (ctrl->is_private)
@@ -1552,7 +1553,7 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
 		if (ret)
 			break;
 	}
-	mutex_unlock(&add->lock);
+	mutex_unlock(add->lock);
 	return ret;
 }
 EXPORT_SYMBOL(v4l2_ctrl_add_handler);
@@ -1716,11 +1717,11 @@ void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
 	len = strlen(prefix);
 	if (len && prefix[len - 1] != ' ')
 		colon = ": ";
-	mutex_lock(&hdl->lock);
+	mutex_lock(hdl->lock);
 	list_for_each_entry(ctrl, &hdl->ctrls, node)
 		if (!(ctrl->flags & V4L2_CTRL_FLAG_DISABLED))
 			log_ctrl(ctrl, prefix, colon);
-	mutex_unlock(&hdl->lock);
+	mutex_unlock(hdl->lock);
 }
 EXPORT_SYMBOL(v4l2_ctrl_handler_log_status);
 
@@ -1732,7 +1733,7 @@ int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
 
 	if (hdl == NULL)
 		return 0;
-	mutex_lock(&hdl->lock);
+	mutex_lock(hdl->lock);
 	list_for_each_entry(ctrl, &hdl->ctrls, node)
 		ctrl->done = false;
 
@@ -1757,7 +1758,7 @@ int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
 		if (ret)
 			break;
 	}
-	mutex_unlock(&hdl->lock);
+	mutex_unlock(hdl->lock);
 	return ret;
 }
 EXPORT_SYMBOL(v4l2_ctrl_handler_setup);
@@ -1772,7 +1773,7 @@ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc)
 	if (hdl == NULL)
 		return -EINVAL;
 
-	mutex_lock(&hdl->lock);
+	mutex_lock(hdl->lock);
 
 	/* Try to find it */
 	ref = find_ref(hdl, id);
@@ -1797,7 +1798,7 @@ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc)
 					break;
 		}
 	}
-	mutex_unlock(&hdl->lock);
+	mutex_unlock(hdl->lock);
 	if (!ref)
 		return -EINVAL;
 
@@ -1974,7 +1975,7 @@ static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 	   belong to the same cluster. */
 
 	/* This has to be done with the handler lock taken. */
-	mutex_lock(&hdl->lock);
+	mutex_lock(hdl->lock);
 
 	/* First zero the helper field in the master control references */
 	for (i = 0; i < cs->count; i++)
@@ -1996,7 +1997,7 @@ static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 		/* Point the mref helper to the current helper struct. */
 		mref->helper = h;
 	}
-	mutex_unlock(&hdl->lock);
+	mutex_unlock(hdl->lock);
 	return 0;
 }
 
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index d75a1e4..256e9ba 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -485,7 +485,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 	gen_text(dev, vbuf, line++ * 16, 16, str);
 
 	gain = v4l2_ctrl_g_ctrl(dev->gain);
-	mutex_lock(&dev->ctrl_handler.lock);
+	mutex_lock(dev->ctrl_handler.lock);
 	snprintf(str, sizeof(str), " brightness %3d, contrast %3d, saturation %3d, hue %d ",
 			dev->brightness->cur.val,
 			dev->contrast->cur.val,
@@ -508,7 +508,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 			dev->int_menu->qmenu_int[dev->int_menu->cur.val],
 			dev->int_menu->cur.val);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
-	mutex_unlock(&dev->ctrl_handler.lock);
+	mutex_unlock(dev->ctrl_handler.lock);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
 	if (dev->button_pressed) {
 		dev->button_pressed--;
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 533315b..71abac0 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -168,7 +168,9 @@ struct v4l2_ctrl_ref {
 /** struct v4l2_ctrl_handler - The control handler keeps track of all the
   * controls: both the controls owned by the handler and those inherited
   * from other handlers.
+  * @_lock:	Default for "lock".
   * @lock:	Lock to control access to this handler and its controls.
+  *		May be replaced by the user right after init.
   * @ctrls:	The list of controls owned by this handler.
   * @ctrl_refs:	The list of control references.
   * @cached:	The last found control reference. It is common that the same
@@ -179,7 +181,8 @@ struct v4l2_ctrl_ref {
   * @error:	The error code of the first failed control addition.
   */
 struct v4l2_ctrl_handler {
-	struct mutex lock;
+	struct mutex _lock;
+	struct mutex *lock;
 	struct list_head ctrls;
 	struct list_head ctrl_refs;
 	struct v4l2_ctrl_ref *cached;
@@ -456,7 +459,7 @@ void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
   */
 static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl)
 {
-	mutex_lock(&ctrl->handler->lock);
+	mutex_lock(ctrl->handler->lock);
 }
 
 /** v4l2_ctrl_lock() - Helper function to unlock the handler
@@ -465,7 +468,7 @@ static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl)
   */
 static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl)
 {
-	mutex_unlock(&ctrl->handler->lock);
+	mutex_unlock(ctrl->handler->lock);
 }
 
 /** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver.
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 18/35] v4l: Allow changing control handler lock
  2012-03-06 16:32 ` [PATCH v5 18/35] v4l: Allow changing control handler lock Sakari Ailus
@ 2012-05-14 15:27   ` Sylwester Nawrocki
  2012-05-14 15:45     ` Sakari Ailus
  2012-05-14 15:48     ` Sylwester Nawrocki
  0 siblings, 2 replies; 93+ messages in thread
From: Sylwester Nawrocki @ 2012-05-14 15:27 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

On 03/06/2012 05:32 PM, Sakari Ailus wrote:
> Allow choosing the lock used by the control handler. This may be handy
> sometimes when a driver providing multiple subdevs does not want to use
> several locks to serialise its functions.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
>  drivers/media/video/adp1653.c    |    8 +++---
>  drivers/media/video/v4l2-ctrls.c |   39 +++++++++++++++++++------------------
>  drivers/media/video/vivi.c       |    4 +-
>  include/media/v4l2-ctrls.h       |    9 +++++--
>  4 files changed, 32 insertions(+), 28 deletions(-)
...
> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
> index 533315b..71abac0 100644
> --- a/include/media/v4l2-ctrls.h
> +++ b/include/media/v4l2-ctrls.h
> @@ -168,7 +168,9 @@ struct v4l2_ctrl_ref {
>  /** struct v4l2_ctrl_handler - The control handler keeps track of all the
>    * controls: both the controls owned by the handler and those inherited
>    * from other handlers.
> +  * @_lock:	Default for "lock".
>    * @lock:	Lock to control access to this handler and its controls.
> +  *		May be replaced by the user right after init.
>    * @ctrls:	The list of controls owned by this handler.
>    * @ctrl_refs:	The list of control references.
>    * @cached:	The last found control reference. It is common that the same
> @@ -179,7 +181,8 @@ struct v4l2_ctrl_ref {
>    * @error:	The error code of the first failed control addition.
>    */
>  struct v4l2_ctrl_handler {
> -	struct mutex lock;
> +	struct mutex _lock;
> +	struct mutex *lock;

I think we have an issue here. All drivers that reference ctrl_handler.lock
directly need to be updated, since the 'lock' member of struct v4l2_ctrl_handler
is no a pointer. So insted 

mutex_lock(&ctrl_handler.lock);

they should now do

mutex_lock(ctrl_handler.lock);

Or am I missing something ?

For example, I'm getting following error:

drivers/media/video/s5p-fimc/fimc-core.c: In function ‘fimc_ctrls_activate’:
drivers/media/video/s5p-fimc/fimc-core.c:678: warning: passing argument 1 of ‘mutex_lock’ from incompatible pointer type
include/linux/mutex.h:152: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
drivers/media/video/s5p-fimc/fimc-core.c:697: warning: passing argument 1 of ‘mutex_unlock’ from incompatible pointer type
include/linux/mutex.h:169: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’

AFAICT only vivi and s5p-fimc drivers use the control handler lock 
directly, so I can prepare a patch updating those drivers.

>  	struct list_head ctrls;
>  	struct list_head ctrl_refs;
>  	struct v4l2_ctrl_ref *cached;
> @@ -456,7 +459,7 @@ void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
>    */
>  static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl)
>  {
> -	mutex_lock(&ctrl->handler->lock);
> +	mutex_lock(ctrl->handler->lock);
>  }
>  
>  /** v4l2_ctrl_lock() - Helper function to unlock the handler
> @@ -465,7 +468,7 @@ static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl)
>    */
>  static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl)
>  {
> -	mutex_unlock(&ctrl->handler->lock);
> +	mutex_unlock(ctrl->handler->lock);
>  }
>  
>  /** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver.

--

Regards,
Sylwester

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 18/35] v4l: Allow changing control handler lock
  2012-05-14 15:27   ` Sylwester Nawrocki
@ 2012-05-14 15:45     ` Sakari Ailus
  2012-05-14 16:02       ` Sylwester Nawrocki
  2012-05-14 15:48     ` Sylwester Nawrocki
  1 sibling, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-05-14 15:45 UTC (permalink / raw)
  To: Sylwester Nawrocki
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sylwester,

Sylwester Nawrocki wrote:
> Hi Sakari,
>
> On 03/06/2012 05:32 PM, Sakari Ailus wrote:
>> Allow choosing the lock used by the control handler. This may be handy
>> sometimes when a driver providing multiple subdevs does not want to use
>> several locks to serialise its functions.
>>
>> Signed-off-by: Sakari Ailus<sakari.ailus@iki.fi>
>> ---
>>   drivers/media/video/adp1653.c    |    8 +++---
>>   drivers/media/video/v4l2-ctrls.c |   39 +++++++++++++++++++------------------
>>   drivers/media/video/vivi.c       |    4 +-
>>   include/media/v4l2-ctrls.h       |    9 +++++--
>>   4 files changed, 32 insertions(+), 28 deletions(-)
> ...
>> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
>> index 533315b..71abac0 100644
>> --- a/include/media/v4l2-ctrls.h
>> +++ b/include/media/v4l2-ctrls.h
>> @@ -168,7 +168,9 @@ struct v4l2_ctrl_ref {
>>   /** struct v4l2_ctrl_handler - The control handler keeps track of all the
>>     * controls: both the controls owned by the handler and those inherited
>>     * from other handlers.
>> +  * @_lock:	Default for "lock".
>>     * @lock:	Lock to control access to this handler and its controls.
>> +  *		May be replaced by the user right after init.
>>     * @ctrls:	The list of controls owned by this handler.
>>     * @ctrl_refs:	The list of control references.
>>     * @cached:	The last found control reference. It is common that the same
>> @@ -179,7 +181,8 @@ struct v4l2_ctrl_ref {
>>     * @error:	The error code of the first failed control addition.
>>     */
>>   struct v4l2_ctrl_handler {
>> -	struct mutex lock;
>> +	struct mutex _lock;
>> +	struct mutex *lock;
>
> I think we have an issue here. All drivers that reference ctrl_handler.lock
> directly need to be updated, since the 'lock' member of struct v4l2_ctrl_handler
> is no a pointer. So insted
>
> mutex_lock(&ctrl_handler.lock);
>
> they should now do
>
> mutex_lock(ctrl_handler.lock);
>
> Or am I missing something ?
>
> For example, I'm getting following error:
>
> drivers/media/video/s5p-fimc/fimc-core.c: In function ‘fimc_ctrls_activate’:
> drivers/media/video/s5p-fimc/fimc-core.c:678: warning: passing argument 1 of ‘mutex_lock’ from incompatible pointer type
> include/linux/mutex.h:152: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
> drivers/media/video/s5p-fimc/fimc-core.c:697: warning: passing argument 1 of ‘mutex_unlock’ from incompatible pointer type
> include/linux/mutex.h:169: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
>
> AFAICT only vivi and s5p-fimc drivers use the control handler lock
> directly, so I can prepare a patch updating those drivers.

Ooops. The patch included the changes for adp1653 and vivi which I found 
to be the only drivers using the lock directly. I somehow missed 
s5p-fimc --- sorry about that.

Regards,

-- 
Sakari Ailus
sakari.ailus@iki.fi

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 18/35] v4l: Allow changing control handler lock
  2012-05-14 15:45     ` Sakari Ailus
@ 2012-05-14 16:02       ` Sylwester Nawrocki
  0 siblings, 0 replies; 93+ messages in thread
From: Sylwester Nawrocki @ 2012-05-14 16:02 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

On 05/14/2012 05:45 PM, Sakari Ailus wrote:
> Ooops. The patch included the changes for adp1653 and vivi which I found to be
> the only drivers using the lock directly. I somehow missed s5p-fimc --- sorry
> about that.

It's all right, no big deal. I'll make a patch to correct this.

-- 
Regards
Sylwester

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 18/35] v4l: Allow changing control handler lock
  2012-05-14 15:27   ` Sylwester Nawrocki
  2012-05-14 15:45     ` Sakari Ailus
@ 2012-05-14 15:48     ` Sylwester Nawrocki
  1 sibling, 0 replies; 93+ messages in thread
From: Sylwester Nawrocki @ 2012-05-14 15:48 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

On 05/14/2012 05:27 PM, Sylwester Nawrocki wrote:
> Hi Sakari,
> 
> On 03/06/2012 05:32 PM, Sakari Ailus wrote:
>> Allow choosing the lock used by the control handler. This may be handy
>> sometimes when a driver providing multiple subdevs does not want to use
>> several locks to serialise its functions.
>>
>> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
>> ---
>>  drivers/media/video/adp1653.c    |    8 +++---
>>  drivers/media/video/v4l2-ctrls.c |   39 +++++++++++++++++++------------------
>>  drivers/media/video/vivi.c       |    4 +-
>>  include/media/v4l2-ctrls.h       |    9 +++++--
>>  4 files changed, 32 insertions(+), 28 deletions(-)
> ...
>> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
>> index 533315b..71abac0 100644
>> --- a/include/media/v4l2-ctrls.h
>> +++ b/include/media/v4l2-ctrls.h
>> @@ -168,7 +168,9 @@ struct v4l2_ctrl_ref {
>>  /** struct v4l2_ctrl_handler - The control handler keeps track of all the
>>    * controls: both the controls owned by the handler and those inherited
>>    * from other handlers.
>> +  * @_lock:	Default for "lock".
>>    * @lock:	Lock to control access to this handler and its controls.
>> +  *		May be replaced by the user right after init.
>>    * @ctrls:	The list of controls owned by this handler.
>>    * @ctrl_refs:	The list of control references.
>>    * @cached:	The last found control reference. It is common that the same
>> @@ -179,7 +181,8 @@ struct v4l2_ctrl_ref {
>>    * @error:	The error code of the first failed control addition.
>>    */
>>  struct v4l2_ctrl_handler {
>> -	struct mutex lock;
>> +	struct mutex _lock;
>> +	struct mutex *lock;
> 
> I think we have an issue here. All drivers that reference ctrl_handler.lock
> directly need to be updated, since the 'lock' member of struct v4l2_ctrl_handler
> is now a pointer. So instead 
> 
> mutex_lock(&ctrl_handler.lock);
> 
> they should now do
> 
> mutex_lock(ctrl_handler.lock);
> 
> Or am I missing something ?
> 
> For example, I'm getting following error:
> 
> drivers/media/video/s5p-fimc/fimc-core.c: In function ‘fimc_ctrls_activate’:
> drivers/media/video/s5p-fimc/fimc-core.c:678: warning: passing argument 1 of ‘mutex_lock’ from incompatible pointer type
> include/linux/mutex.h:152: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
> drivers/media/video/s5p-fimc/fimc-core.c:697: warning: passing argument 1 of ‘mutex_unlock’ from incompatible pointer type
> include/linux/mutex.h:169: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
> 
> AFAICT only vivi and s5p-fimc drivers use the control handler lock 
> directly, so I can prepare a patch updating those drivers.

OK, vivi and adp1653 are already modified in this patch, so s5p-fimc
seems the only one left. I'll fix that.

Regards,
Sylwester

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 19/35] omap3isp: Support additional in-memory compressed bayer formats
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (17 preceding siblings ...)
  2012-03-06 16:32 ` [PATCH v5 18/35] v4l: Allow changing control handler lock Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 20/35] omap3isp: Move definitions required by board code under include/media Sakari Ailus
                   ` (15 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

This also prevents accessing NULL pointer in csi2_try_format().

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/omap3isp/ispvideo.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index b020700..c191f13 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -46,6 +46,10 @@
  * Helper functions
  */
 
+/*
+ * NOTE: When adding new media bus codes, always remember to add
+ * corresponding in-memory formats to the table below!!!
+ */
 static struct isp_format_info formats[] = {
 	{ V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8,
 	  V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8,
@@ -68,9 +72,18 @@ static struct isp_format_info formats[] = {
 	{ V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8,
 	  V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8,
 	  V4L2_PIX_FMT_SRGGB8, 8, },
+	{ V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8,
+	  V4L2_MBUS_FMT_SBGGR10_1X10, 0,
+	  V4L2_PIX_FMT_SBGGR10DPCM8, 8, },
+	{ V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8,
+	  V4L2_MBUS_FMT_SGBRG10_1X10, 0,
+	  V4L2_PIX_FMT_SGBRG10DPCM8, 8, },
 	{ V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8,
 	  V4L2_MBUS_FMT_SGRBG10_1X10, 0,
 	  V4L2_PIX_FMT_SGRBG10DPCM8, 8, },
+	{ V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8,
+	  V4L2_MBUS_FMT_SRGGB10_1X10, 0,
+	  V4L2_PIX_FMT_SRGGB10DPCM8, 8, },
 	{ V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10,
 	  V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR8_1X8,
 	  V4L2_PIX_FMT_SBGGR10, 10, },
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 20/35] omap3isp: Move definitions required by board code under include/media.
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (18 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 19/35] omap3isp: Support additional in-memory compressed bayer formats Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 21/35] omap3: add definition for CONTROL_CAMERA_PHY_CTRL Sakari Ailus
                   ` (14 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

XCLK definitions are often required by the board code. Move them to public
include file.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/omap3isp/isp.h |    4 ----
 include/media/omap3isp.h           |    4 ++++
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h
index d96603e..2e78041 100644
--- a/drivers/media/video/omap3isp/isp.h
+++ b/drivers/media/video/omap3isp/isp.h
@@ -237,10 +237,6 @@ void omap3isp_configure_bridge(struct isp_device *isp,
 			       const struct isp_parallel_platform_data *pdata,
 			       unsigned int shift);
 
-#define ISP_XCLK_NONE			0
-#define ISP_XCLK_A			1
-#define ISP_XCLK_B			2
-
 struct isp_device *omap3isp_get(struct isp_device *isp);
 void omap3isp_put(struct isp_device *isp);
 
diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h
index 042849a..3f4928d 100644
--- a/include/media/omap3isp.h
+++ b/include/media/omap3isp.h
@@ -29,6 +29,10 @@
 struct i2c_board_info;
 struct isp_device;
 
+#define ISP_XCLK_NONE			0
+#define ISP_XCLK_A			1
+#define ISP_XCLK_B			2
+
 enum isp_interface_type {
 	ISP_INTERFACE_PARALLEL,
 	ISP_INTERFACE_CSI2A_PHY2,
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 21/35] omap3: add definition for CONTROL_CAMERA_PHY_CTRL
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (19 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 20/35] omap3isp: Move definitions required by board code under include/media Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 22/35] omap3isp: Move setting constaints above media_entity_pipeline_start Sakari Ailus
                   ` (13 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

This register is available only in OMAP3630.

The original patch was submitted by Vimarsh Zutshi.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-omap2/control.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 0ba68d3..f3acf09 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -183,6 +183,7 @@
 #define OMAP3630_CONTROL_FUSE_OPP120_VDD1       (OMAP2_CONTROL_GENERAL + 0x0120)
 #define OMAP3630_CONTROL_FUSE_OPP50_VDD2        (OMAP2_CONTROL_GENERAL + 0x0128)
 #define OMAP3630_CONTROL_FUSE_OPP100_VDD2       (OMAP2_CONTROL_GENERAL + 0x012C)
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL	(OMAP2_CONTROL_GENERAL + 0x02f0)
 
 /* OMAP44xx control efuse offsets */
 #define OMAP44XX_CONTROL_FUSE_IVA_OPP50		0x22C
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 22/35] omap3isp: Move setting constaints above media_entity_pipeline_start
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (20 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 21/35] omap3: add definition for CONTROL_CAMERA_PHY_CTRL Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 23/35] omap3isp: Assume media_entity_pipeline_start may fail Sakari Ailus
                   ` (12 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

The clock rate for l3_ick will soon be read during pipeline validation which
is now part of media_entity_pipeline_start(). For that reason we set
constraints earlier on.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/omap3isp/ispvideo.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index c191f13..b0d541b 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -304,8 +304,6 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
 	struct v4l2_subdev *subdev;
 	int ret;
 
-	pipe->max_rate = pipe->l3_ick;
-
 	subdev = isp_video_remote_subdev(pipe->output, NULL);
 	if (subdev == NULL)
 		return -EPIPE;
@@ -993,6 +991,12 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	 */
 	pipe = video->video.entity.pipe
 	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
+
+	if (video->isp->pdata->set_constraints)
+		video->isp->pdata->set_constraints(video->isp, true);
+	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
+	pipe->max_rate = pipe->l3_ick;
+
 	media_entity_pipeline_start(&video->video.entity, &pipe->pipe);
 
 	/* Verify that the currently configured format matches the output of
@@ -1025,10 +1029,6 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 		pipe->output = far_end;
 	}
 
-	if (video->isp->pdata->set_constraints)
-		video->isp->pdata->set_constraints(video->isp, true);
-	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
-
 	/* Validate the pipeline and update its state. */
 	ret = isp_video_validate_pipeline(pipe);
 	if (ret < 0)
@@ -1074,9 +1074,9 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 error:
 	if (ret < 0) {
 		omap3isp_video_queue_streamoff(&vfh->queue);
+		media_entity_pipeline_stop(&video->video.entity);
 		if (video->isp->pdata->set_constraints)
 			video->isp->pdata->set_constraints(video->isp, false);
-		media_entity_pipeline_stop(&video->video.entity);
 		/* The DMA queue must be emptied here, otherwise CCDC interrupts
 		 * that will get triggered the next time the CCDC is powered up
 		 * will try to access buffers that might have been freed but
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 23/35] omap3isp: Assume media_entity_pipeline_start may fail
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (21 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 22/35] omap3isp: Move setting constaints above media_entity_pipeline_start Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:45   ` Laurent Pinchart
  2012-03-06 16:33 ` [PATCH v5 24/35] omap3isp: Add lane configuration to platform data Sakari Ailus
                   ` (11 subsequent siblings)
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Since media_entity_pipeline_start() now does link validation, it may
actually fail. Perform the error handling.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispvideo.c |   52 ++++++++++++++++--------------
 1 files changed, 28 insertions(+), 24 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index b0d541b..d34f690 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -997,14 +997,16 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
 	pipe->max_rate = pipe->l3_ick;
 
-	media_entity_pipeline_start(&video->video.entity, &pipe->pipe);
+	ret = media_entity_pipeline_start(&video->video.entity, &pipe->pipe);
+	if (ret < 0)
+		goto err_pipeline_start;
 
 	/* Verify that the currently configured format matches the output of
 	 * the connected subdev.
 	 */
 	ret = isp_video_check_format(video, vfh);
 	if (ret < 0)
-		goto error;
+		goto err_check_format;
 
 	video->bpl_padding = ret;
 	video->bpl_value = vfh->format.fmt.pix.bytesperline;
@@ -1021,7 +1023,7 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	} else {
 		if (far_end == NULL) {
 			ret = -EPIPE;
-			goto error;
+			goto err_check_format;
 		}
 
 		state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
@@ -1032,7 +1034,7 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	/* Validate the pipeline and update its state. */
 	ret = isp_video_validate_pipeline(pipe);
 	if (ret < 0)
-		goto error;
+		goto err_check_format;
 
 	pipe->error = false;
 
@@ -1054,7 +1056,7 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 
 	ret = omap3isp_video_queue_streamon(&vfh->queue);
 	if (ret < 0)
-		goto error;
+		goto err_check_format;
 
 	/* In sensor-to-memory mode, the stream can be started synchronously
 	 * to the stream on command. In memory-to-memory mode, it will be
@@ -1064,32 +1066,34 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 		ret = omap3isp_pipeline_set_stream(pipe,
 					      ISP_PIPELINE_STREAM_CONTINUOUS);
 		if (ret < 0)
-			goto error;
+			goto err_set_stream;
 		spin_lock_irqsave(&video->queue->irqlock, flags);
 		if (list_empty(&video->dmaqueue))
 			video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN;
 		spin_unlock_irqrestore(&video->queue->irqlock, flags);
 	}
 
-error:
-	if (ret < 0) {
-		omap3isp_video_queue_streamoff(&vfh->queue);
-		media_entity_pipeline_stop(&video->video.entity);
-		if (video->isp->pdata->set_constraints)
-			video->isp->pdata->set_constraints(video->isp, false);
-		/* The DMA queue must be emptied here, otherwise CCDC interrupts
-		 * that will get triggered the next time the CCDC is powered up
-		 * will try to access buffers that might have been freed but
-		 * still present in the DMA queue. This can easily get triggered
-		 * if the above omap3isp_pipeline_set_stream() call fails on a
-		 * system with a free-running sensor.
-		 */
-		INIT_LIST_HEAD(&video->dmaqueue);
-		video->queue = NULL;
-	}
+	video->streaming = 1;
+
+	mutex_unlock(&video->stream_lock);
+	return 0;
 
-	if (!ret)
-		video->streaming = 1;
+err_set_stream:
+	omap3isp_video_queue_streamoff(&vfh->queue);
+err_check_format:
+	media_entity_pipeline_stop(&video->video.entity);
+err_pipeline_start:
+	if (video->isp->pdata->set_constraints)
+		video->isp->pdata->set_constraints(video->isp, false);
+	/* The DMA queue must be emptied here, otherwise CCDC interrupts that
+	 * will get triggered the next time the CCDC is powered up will try to
+	 * access buffers that might have been freed but still present in the
+	 * DMA queue. This can easily get triggered if the above
+	 * omap3isp_pipeline_set_stream() call fails on a system with a
+	 * free-running sensor.
+	 */
+	INIT_LIST_HEAD(&video->dmaqueue);
+	video->queue = NULL;
 
 	mutex_unlock(&video->stream_lock);
 	return ret;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 23/35] omap3isp: Assume media_entity_pipeline_start may fail
  2012-03-06 16:33 ` [PATCH v5 23/35] omap3isp: Assume media_entity_pipeline_start may fail Sakari Ailus
@ 2012-03-06 16:45   ` Laurent Pinchart
  0 siblings, 0 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-06 16:45 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:33:04 Sakari Ailus wrote:
> Since media_entity_pipeline_start() now does link validation, it may
> actually fail. Perform the error handling.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 24/35] omap3isp: Add lane configuration to platform data
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (22 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 23/35] omap3isp: Assume media_entity_pipeline_start may fail Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline Sakari Ailus
                   ` (10 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add lane configuration (order of clock and data lane) to platform data on
both CCP2 and CSI-2.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/omap3isp/ispcsiphy.h |   15 ++-------------
 include/media/omap3isp.h                 |   25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 13 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispcsiphy.h b/drivers/media/video/omap3isp/ispcsiphy.h
index 9596dc6..e93a661 100644
--- a/drivers/media/video/omap3isp/ispcsiphy.h
+++ b/drivers/media/video/omap3isp/ispcsiphy.h
@@ -27,22 +27,11 @@
 #ifndef OMAP3_ISP_CSI_PHY_H
 #define OMAP3_ISP_CSI_PHY_H
 
+#include <media/omap3isp.h>
+
 struct isp_csi2_device;
 struct regulator;
 
-struct csiphy_lane {
-	u8 pos;
-	u8 pol;
-};
-
-#define ISP_CSIPHY2_NUM_DATA_LANES	2
-#define ISP_CSIPHY1_NUM_DATA_LANES	1
-
-struct isp_csiphy_lanes_cfg {
-	struct csiphy_lane data[ISP_CSIPHY2_NUM_DATA_LANES];
-	struct csiphy_lane clk;
-};
-
 struct isp_csiphy_dphy_cfg {
 	u8 ths_term;
 	u8 ths_settle;
diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h
index 3f4928d..4d94be5 100644
--- a/include/media/omap3isp.h
+++ b/include/media/omap3isp.h
@@ -91,6 +91,29 @@ enum {
 };
 
 /**
+ * struct isp_csiphy_lane: CCP2/CSI2 lane position and polarity
+ * @pos: position of the lane
+ * @pol: polarity of the lane
+ */
+struct isp_csiphy_lane {
+	u8 pos;
+	u8 pol;
+};
+
+#define ISP_CSIPHY1_NUM_DATA_LANES	1
+#define ISP_CSIPHY2_NUM_DATA_LANES	2
+
+/**
+ * struct isp_csiphy_lanes_cfg - CCP2/CSI2 lane configuration
+ * @data: Configuration of one or two data lanes
+ * @clk: Clock lane configuration
+ */
+struct isp_csiphy_lanes_cfg {
+	struct isp_csiphy_lane data[ISP_CSIPHY2_NUM_DATA_LANES];
+	struct isp_csiphy_lane clk;
+};
+
+/**
  * struct isp_ccp2_platform_data - CCP2 interface platform data
  * @strobe_clk_pol: Strobe/clock polarity
  *		0 - Non Inverted, 1 - Inverted
@@ -109,6 +132,7 @@ struct isp_ccp2_platform_data {
 	unsigned int ccp2_mode:1;
 	unsigned int phy_layer:1;
 	unsigned int vpclk_div:2;
+	struct isp_csiphy_lanes_cfg lanecfg;
 };
 
 /**
@@ -119,6 +143,7 @@ struct isp_ccp2_platform_data {
 struct isp_csi2_platform_data {
 	unsigned crc:1;
 	unsigned vpclk_div:2;
+	struct isp_csiphy_lanes_cfg lanecfg;
 };
 
 struct isp_subdev_i2c_board_info {
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (23 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 24/35] omap3isp: Add lane configuration to platform data Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-07 10:35   ` Laurent Pinchart
  2012-03-07 10:50   ` [PATCH v5 " Laurent Pinchart
  2012-03-06 16:33 ` [PATCH v5 26/35] omap3isp: Add information on external subdev to struct isp_pipeline Sakari Ailus
                   ` (9 subsequent siblings)
  34 siblings, 2 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Collect entities which are part of the pipeline into a single bit mask.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispvideo.c |    9 +++++++++
 drivers/media/video/omap3isp/ispvideo.h |    1 +
 2 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index d34f690..4bc9cca 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -970,6 +970,8 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 {
 	struct isp_video_fh *vfh = to_isp_video_fh(fh);
 	struct isp_video *video = video_drvdata(file);
+	struct media_entity_graph graph;
+	struct media_entity *entity;
 	enum isp_pipeline_state state;
 	struct isp_pipeline *pipe;
 	struct isp_video *far_end;
@@ -992,6 +994,8 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	pipe = video->video.entity.pipe
 	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
 
+	pipe->entities = 0;
+
 	if (video->isp->pdata->set_constraints)
 		video->isp->pdata->set_constraints(video->isp, true);
 	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
@@ -1001,6 +1005,11 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	if (ret < 0)
 		goto err_pipeline_start;
 
+	entity = &video->video.entity;
+	media_entity_graph_walk_start(&graph, entity);
+	while ((entity = media_entity_graph_walk_next(&graph)))
+		pipe->entities |= 1 << entity->id;
+
 	/* Verify that the currently configured format matches the output of
 	 * the connected subdev.
 	 */
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index d91bdb91..0423c9d 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -96,6 +96,7 @@ struct isp_pipeline {
 	enum isp_pipeline_stream_state stream_state;
 	struct isp_video *input;
 	struct isp_video *output;
+	u32 entities;
 	unsigned long l3_ick;
 	unsigned int max_rate;
 	atomic_t frame_number;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-06 16:33 ` [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline Sakari Ailus
@ 2012-03-07 10:35   ` Laurent Pinchart
  2012-03-07 17:20     ` Sakari Ailus
  2012-03-08 17:05     ` Sakari Ailus
  2012-03-07 10:50   ` [PATCH v5 " Laurent Pinchart
  1 sibling, 2 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 10:35 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:33:06 Sakari Ailus wrote:
> Collect entities which are part of the pipeline into a single bit mask.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
>  drivers/media/video/omap3isp/ispvideo.c |    9 +++++++++
>  drivers/media/video/omap3isp/ispvideo.h |    1 +
>  2 files changed, 10 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/media/video/omap3isp/ispvideo.c
> b/drivers/media/video/omap3isp/ispvideo.c index d34f690..4bc9cca 100644
> --- a/drivers/media/video/omap3isp/ispvideo.c
> +++ b/drivers/media/video/omap3isp/ispvideo.c
> @@ -970,6 +970,8 @@ isp_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) {
>  	struct isp_video_fh *vfh = to_isp_video_fh(fh);
>  	struct isp_video *video = video_drvdata(file);
> +	struct media_entity_graph graph;
> +	struct media_entity *entity;
>  	enum isp_pipeline_state state;
>  	struct isp_pipeline *pipe;
>  	struct isp_video *far_end;
> @@ -992,6 +994,8 @@ isp_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) pipe = video->video.entity.pipe
>  	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
> 
> +	pipe->entities = 0;
> +

This could be move right before the graph walk code below to keep both parts 
together. However, pipe->entities would then be invalid (instead of always 0) 
in the link validation operations. That can be considered as an issue, so I'm 
fine if you prefer leaving this assignment here.

>  	if (video->isp->pdata->set_constraints)
>  		video->isp->pdata->set_constraints(video->isp, true);
>  	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
> @@ -1001,6 +1005,11 @@ isp_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) if (ret < 0)
>  		goto err_pipeline_start;
> 
> +	entity = &video->video.entity;
> +	media_entity_graph_walk_start(&graph, entity);
> +	while ((entity = media_entity_graph_walk_next(&graph)))
> +		pipe->entities |= 1 << entity->id;
> +

To avoid walking the graph one more time, what about moving this to 
isp_video_far_end() where we already walk the graph (and moving the 
isp_video_far_end() call earlier in this function) ? You could possible rename 
isp_video_far_end() to something a bit more in line with its new purpose then.

>  	/* Verify that the currently configured format matches the output of
>  	 * the connected subdev.
>  	 */
> diff --git a/drivers/media/video/omap3isp/ispvideo.h
> b/drivers/media/video/omap3isp/ispvideo.h index d91bdb91..0423c9d 100644
> --- a/drivers/media/video/omap3isp/ispvideo.h
> +++ b/drivers/media/video/omap3isp/ispvideo.h
> @@ -96,6 +96,7 @@ struct isp_pipeline {
>  	enum isp_pipeline_stream_state stream_state;
>  	struct isp_video *input;
>  	struct isp_video *output;
> +	u32 entities;
>  	unsigned long l3_ick;
>  	unsigned int max_rate;
>  	atomic_t frame_number;

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-07 10:35   ` Laurent Pinchart
@ 2012-03-07 17:20     ` Sakari Ailus
  2012-03-07 17:22       ` [PATCH v5.1 " Sakari Ailus
  2012-03-08 17:05     ` Sakari Ailus
  1 sibling, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 17:20 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

On Wed, Mar 07, 2012 at 11:35:02AM +0100, Laurent Pinchart wrote:
> On Tuesday 06 March 2012 18:33:06 Sakari Ailus wrote:
> > Collect entities which are part of the pipeline into a single bit mask.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> > ---
> >  drivers/media/video/omap3isp/ispvideo.c |    9 +++++++++
> >  drivers/media/video/omap3isp/ispvideo.h |    1 +
> >  2 files changed, 10 insertions(+), 0 deletions(-)
> > 
> > diff --git a/drivers/media/video/omap3isp/ispvideo.c
> > b/drivers/media/video/omap3isp/ispvideo.c index d34f690..4bc9cca 100644
> > --- a/drivers/media/video/omap3isp/ispvideo.c
> > +++ b/drivers/media/video/omap3isp/ispvideo.c
> > @@ -970,6 +970,8 @@ isp_video_streamon(struct file *file, void *fh, enum
> > v4l2_buf_type type) {
> >  	struct isp_video_fh *vfh = to_isp_video_fh(fh);
> >  	struct isp_video *video = video_drvdata(file);
> > +	struct media_entity_graph graph;
> > +	struct media_entity *entity;
> >  	enum isp_pipeline_state state;
> >  	struct isp_pipeline *pipe;
> >  	struct isp_video *far_end;
> > @@ -992,6 +994,8 @@ isp_video_streamon(struct file *file, void *fh, enum
> > v4l2_buf_type type) pipe = video->video.entity.pipe
> >  	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
> > 
> > +	pipe->entities = 0;
> > +
> 
> This could be move right before the graph walk code below to keep both parts 
> together. However, pipe->entities would then be invalid (instead of always 0) 
> in the link validation operations. That can be considered as an issue, so I'm 
> fine if you prefer leaving this assignment here.

That's what I also thought, so let's leave it there.

> >  	if (video->isp->pdata->set_constraints)
> >  		video->isp->pdata->set_constraints(video->isp, true);
> >  	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
> > @@ -1001,6 +1005,11 @@ isp_video_streamon(struct file *file, void *fh, enum
> > v4l2_buf_type type) if (ret < 0)
> >  		goto err_pipeline_start;
> > 
> > +	entity = &video->video.entity;
> > +	media_entity_graph_walk_start(&graph, entity);
> > +	while ((entity = media_entity_graph_walk_next(&graph)))
> > +		pipe->entities |= 1 << entity->id;
> > +
> 
> To avoid walking the graph one more time, what about moving this to 
> isp_video_far_end() where we already walk the graph (and moving the 
> isp_video_far_end() call earlier in this function) ? You could possible rename 
> isp_video_far_end() to something a bit more in line with its new purpose then.

isp_video_get_graph_data()?

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.1 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-07 17:20     ` Sakari Ailus
@ 2012-03-07 17:22       ` Sakari Ailus
  2012-03-07 23:50         ` Laurent Pinchart
  0 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 17:22 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Collect entities which are part of the pipeline into a single bit mask.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispvideo.c |   48 ++++++++++++++++---------------
 drivers/media/video/omap3isp/ispvideo.h |    2 +
 2 files changed, 27 insertions(+), 23 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index d34f690..7411076 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -255,8 +255,9 @@ isp_video_remote_subdev(struct isp_video *video, u32 *pad)
 }
 
 /* Return a pointer to the ISP video instance at the far end of the pipeline. */
-static struct isp_video *
-isp_video_far_end(struct isp_video *video)
+static int isp_video_get_graph_data(struct isp_video *video,
+				    struct isp_pipeline *pipe,
+				    enum isp_pipeline_state *state)
 {
 	struct media_entity_graph graph;
 	struct media_entity *entity = &video->video.entity;
@@ -267,6 +268,8 @@ isp_video_far_end(struct isp_video *video)
 	media_entity_graph_walk_start(&graph, entity);
 
 	while ((entity = media_entity_graph_walk_next(&graph))) {
+		pipe->entities |= 1 << entity->id;
+
 		if (entity == &video->video.entity)
 			continue;
 
@@ -281,7 +284,21 @@ isp_video_far_end(struct isp_video *video)
 	}
 
 	mutex_unlock(&mdev->graph_mutex);
-	return far_end;
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		*state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
+		pipe->input = far_end;
+		pipe->output = video;
+	} else {
+		if (far_end == NULL)
+			return -EPIPE;
+
+		*state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
+		pipe->input = video;
+		pipe->output = far_end;
+	}
+
+	return 0;
 }
 
 /*
@@ -972,7 +989,6 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	struct isp_video *video = video_drvdata(file);
 	enum isp_pipeline_state state;
 	struct isp_pipeline *pipe;
-	struct isp_video *far_end;
 	unsigned long flags;
 	int ret;
 
@@ -992,6 +1008,8 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	pipe = video->video.entity.pipe
 	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
 
+	pipe->entities = 0;
+
 	if (video->isp->pdata->set_constraints)
 		video->isp->pdata->set_constraints(video->isp, true);
 	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
@@ -1011,25 +1029,9 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	video->bpl_padding = ret;
 	video->bpl_value = vfh->format.fmt.pix.bytesperline;
 
-	/* Find the ISP video node connected at the far end of the pipeline and
-	 * update the pipeline.
-	 */
-	far_end = isp_video_far_end(video);
-
-	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
-		pipe->input = far_end;
-		pipe->output = video;
-	} else {
-		if (far_end == NULL) {
-			ret = -EPIPE;
-			goto err_check_format;
-		}
-
-		state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
-		pipe->input = video;
-		pipe->output = far_end;
-	}
+	ret = isp_video_get_graph_data(video, pipe, &state);
+	if (ret < 0)
+		goto err_check_format;
 
 	/* Validate the pipeline and update its state. */
 	ret = isp_video_validate_pipeline(pipe);
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index d91bdb91..c9187cb 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -88,6 +88,7 @@ enum isp_pipeline_state {
 /*
  * struct isp_pipeline - An ISP hardware pipeline
  * @error: A hardware error occurred during capture
+ * @entities: Bitmask of entities in the pipeline (indexed by entity ID)
  */
 struct isp_pipeline {
 	struct media_pipeline pipe;
@@ -96,6 +97,7 @@ struct isp_pipeline {
 	enum isp_pipeline_stream_state stream_state;
 	struct isp_video *input;
 	struct isp_video *output;
+	u32 entities;
 	unsigned long l3_ick;
 	unsigned int max_rate;
 	atomic_t frame_number;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.1 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-07 17:22       ` [PATCH v5.1 " Sakari Ailus
@ 2012-03-07 23:50         ` Laurent Pinchart
  2012-03-09 18:44           ` [PATCH " Sakari Ailus
  2012-03-09 20:31           ` [PATCH v5.3 " Sakari Ailus
  0 siblings, 2 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 23:50 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Wednesday 07 March 2012 19:22:56 Sakari Ailus wrote:
> Collect entities which are part of the pipeline into a single bit mask.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
>  drivers/media/video/omap3isp/ispvideo.c |   48
> ++++++++++++++++--------------- drivers/media/video/omap3isp/ispvideo.h |  
>  2 +
>  2 files changed, 27 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/media/video/omap3isp/ispvideo.c
> b/drivers/media/video/omap3isp/ispvideo.c index d34f690..7411076 100644
> --- a/drivers/media/video/omap3isp/ispvideo.c
> +++ b/drivers/media/video/omap3isp/ispvideo.c
> @@ -255,8 +255,9 @@ isp_video_remote_subdev(struct isp_video *video, u32
> *pad) }
> 
>  /* Return a pointer to the ISP video instance at the far end of the
> pipeline. */ -static struct isp_video *
> -isp_video_far_end(struct isp_video *video)
> +static int isp_video_get_graph_data(struct isp_video *video,
> +				    struct isp_pipeline *pipe,
> +				    enum isp_pipeline_state *state)
>  {
>  	struct media_entity_graph graph;
>  	struct media_entity *entity = &video->video.entity;
> @@ -267,6 +268,8 @@ isp_video_far_end(struct isp_video *video)
>  	media_entity_graph_walk_start(&graph, entity);
> 
>  	while ((entity = media_entity_graph_walk_next(&graph))) {
> +		pipe->entities |= 1 << entity->id;
> +
>  		if (entity == &video->video.entity)
>  			continue;
> 

The loop will stop as soon as it find a video node at the other end of the 
pipeline. As media_entity_graph_walk_next() doesn't guarantee any graph search 
order, you should avoid stopping the loop before having walked all entities, 
otherwise you could miss some.

Something like

        while ((entity = media_entity_graph_walk_next(&graph))) {
                struct isp_video *node;

                pipe->entities |= 1 << entity->id;

                if (entity == &video->video.entity)
                        continue;

                if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE)
                        continue;

                node = to_isp_video(media_entity_to_video_device(entity));
                if (node->type != video->type)
                        far_end = node;
        }

should do (feel free to rename node to something else, I have little 
imagination so late at night).

> @@ -281,7 +284,21 @@ isp_video_far_end(struct isp_video *video)
>  	}
> 
>  	mutex_unlock(&mdev->graph_mutex);
> -	return far_end;
> +
> +	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
> +		*state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
> +		pipe->input = far_end;
> +		pipe->output = video;
> +	} else {
> +		if (far_end == NULL)
> +			return -EPIPE;
> +
> +		*state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
> +		pipe->input = video;
> +		pipe->output = far_end;
> +	}
> +
> +	return 0;
>  }
> 
>  /*
> @@ -972,7 +989,6 @@ isp_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) struct isp_video *video = video_drvdata(file);
>  	enum isp_pipeline_state state;
>  	struct isp_pipeline *pipe;
> -	struct isp_video *far_end;
>  	unsigned long flags;
>  	int ret;
> 
> @@ -992,6 +1008,8 @@ isp_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) pipe = video->video.entity.pipe
>  	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
> 
> +	pipe->entities = 0;
> +
>  	if (video->isp->pdata->set_constraints)
>  		video->isp->pdata->set_constraints(video->isp, true);
>  	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
> @@ -1011,25 +1029,9 @@ isp_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) video->bpl_padding = ret;
>  	video->bpl_value = vfh->format.fmt.pix.bytesperline;
> 
> -	/* Find the ISP video node connected at the far end of the pipeline and
> -	 * update the pipeline.
> -	 */
> -	far_end = isp_video_far_end(video);
> -
> -	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
> -		state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
> -		pipe->input = far_end;
> -		pipe->output = video;
> -	} else {
> -		if (far_end == NULL) {
> -			ret = -EPIPE;
> -			goto err_check_format;
> -		}
> -
> -		state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
> -		pipe->input = video;
> -		pipe->output = far_end;
> -	}
> +	ret = isp_video_get_graph_data(video, pipe, &state);
> +	if (ret < 0)
> +		goto err_check_format;
> 
>  	/* Validate the pipeline and update its state. */
>  	ret = isp_video_validate_pipeline(pipe);
> diff --git a/drivers/media/video/omap3isp/ispvideo.h
> b/drivers/media/video/omap3isp/ispvideo.h index d91bdb91..c9187cb 100644
> --- a/drivers/media/video/omap3isp/ispvideo.h
> +++ b/drivers/media/video/omap3isp/ispvideo.h
> @@ -88,6 +88,7 @@ enum isp_pipeline_state {
>  /*
>   * struct isp_pipeline - An ISP hardware pipeline
>   * @error: A hardware error occurred during capture
> + * @entities: Bitmask of entities in the pipeline (indexed by entity ID)
>   */
>  struct isp_pipeline {
>  	struct media_pipeline pipe;
> @@ -96,6 +97,7 @@ struct isp_pipeline {
>  	enum isp_pipeline_stream_state stream_state;
>  	struct isp_video *input;
>  	struct isp_video *output;
> +	u32 entities;
>  	unsigned long l3_ick;
>  	unsigned int max_rate;
>  	atomic_t frame_number;

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-07 23:50         ` Laurent Pinchart
@ 2012-03-09 18:44           ` Sakari Ailus
  2012-03-09 20:31           ` [PATCH v5.3 " Sakari Ailus
  1 sibling, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-09 18:44 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, hverkuil, teturtia, dacohen, snjw23,
	andriy.shevchenko, t.stanislaws, tuukkat76, k.debski, riverful,
	pradeep.sawlani

Collect entities which are part of the pipeline into a single bit mask.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispvideo.c |   61 +++++++++++++++++--------------
 drivers/media/video/omap3isp/ispvideo.h |    2 +
 2 files changed, 35 insertions(+), 28 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index d34f690..8ce3c5b 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -255,8 +255,9 @@ isp_video_remote_subdev(struct isp_video *video, u32 *pad)
 }
 
 /* Return a pointer to the ISP video instance at the far end of the pipeline. */
-static struct isp_video *
-isp_video_far_end(struct isp_video *video)
+static int isp_video_get_graph_data(struct isp_video *video,
+				    struct isp_pipeline *pipe,
+				    enum isp_pipeline_state *state)
 {
 	struct media_entity_graph graph;
 	struct media_entity *entity = &video->video.entity;
@@ -267,21 +268,40 @@ isp_video_far_end(struct isp_video *video)
 	media_entity_graph_walk_start(&graph, entity);
 
 	while ((entity = media_entity_graph_walk_next(&graph))) {
+		struct isp_video *__video;
+
+		pipe->entities |= 1 << entity->id;
+
+		if (far_end != NULL)
+			continue;
+
 		if (entity == &video->video.entity)
 			continue;
 
 		if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE)
 			continue;
 
-		far_end = to_isp_video(media_entity_to_video_device(entity));
-		if (far_end->type != video->type)
-			break;
-
-		far_end = NULL;
+		__video = to_isp_video(media_entity_to_video_device(entity));
+		if (__video->type != video->type)
+			far_end = __video;
 	}
 
 	mutex_unlock(&mdev->graph_mutex);
-	return far_end;
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		*state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
+		pipe->input = far_end;
+		pipe->output = video;
+	} else {
+		if (far_end == NULL)
+			return -EPIPE;
+
+		*state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
+		pipe->input = video;
+		pipe->output = far_end;
+	}
+
+	return 0;
 }
 
 /*
@@ -972,7 +992,6 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	struct isp_video *video = video_drvdata(file);
 	enum isp_pipeline_state state;
 	struct isp_pipeline *pipe;
-	struct isp_video *far_end;
 	unsigned long flags;
 	int ret;
 
@@ -992,6 +1011,8 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	pipe = video->video.entity.pipe
 	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
 
+	pipe->entities = 0;
+
 	if (video->isp->pdata->set_constraints)
 		video->isp->pdata->set_constraints(video->isp, true);
 	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
@@ -1011,25 +1032,9 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	video->bpl_padding = ret;
 	video->bpl_value = vfh->format.fmt.pix.bytesperline;
 
-	/* Find the ISP video node connected at the far end of the pipeline and
-	 * update the pipeline.
-	 */
-	far_end = isp_video_far_end(video);
-
-	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
-		pipe->input = far_end;
-		pipe->output = video;
-	} else {
-		if (far_end == NULL) {
-			ret = -EPIPE;
-			goto err_check_format;
-		}
-
-		state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
-		pipe->input = video;
-		pipe->output = far_end;
-	}
+	ret = isp_video_get_graph_data(video, pipe, &state);
+	if (ret < 0)
+		goto err_check_format;
 
 	/* Validate the pipeline and update its state. */
 	ret = isp_video_validate_pipeline(pipe);
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index d91bdb9..c9187cb 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -88,6 +88,7 @@ enum isp_pipeline_state {
 /*
  * struct isp_pipeline - An ISP hardware pipeline
  * @error: A hardware error occurred during capture
+ * @entities: Bitmask of entities in the pipeline (indexed by entity ID)
  */
 struct isp_pipeline {
 	struct media_pipeline pipe;
@@ -96,6 +97,7 @@ struct isp_pipeline {
 	enum isp_pipeline_stream_state stream_state;
 	struct isp_video *input;
 	struct isp_video *output;
+	u32 entities;
 	unsigned long l3_ick;
 	unsigned int max_rate;
 	atomic_t frame_number;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5.3 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-07 23:50         ` Laurent Pinchart
  2012-03-09 18:44           ` [PATCH " Sakari Ailus
@ 2012-03-09 20:31           ` Sakari Ailus
  2012-03-09 20:34             ` Laurent Pinchart
  1 sibling, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-09 20:31 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, hverkuil, teturtia, dacohen, snjw23,
	andriy.shevchenko, t.stanislaws, tuukkat76, k.debski, riverful,
	pradeep.sawlani

Collect entities which are part of the pipeline into a single bit mask.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
since last version:

- state is set in isp_video_streamon() rather than
  isp_video_get_graph_data().
- Get information from all entities which was broken by the previous
  version.

 drivers/media/video/omap3isp/ispvideo.c |   57 +++++++++++++++++-------------
 drivers/media/video/omap3isp/ispvideo.h |    2 +
 2 files changed, 34 insertions(+), 25 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index d34f690..d8a5250 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -255,8 +255,8 @@ isp_video_remote_subdev(struct isp_video *video, u32 *pad)
 }
 
 /* Return a pointer to the ISP video instance at the far end of the pipeline. */
-static struct isp_video *
-isp_video_far_end(struct isp_video *video)
+static int isp_video_get_graph_data(struct isp_video *video,
+				    struct isp_pipeline *pipe)
 {
 	struct media_entity_graph graph;
 	struct media_entity *entity = &video->video.entity;
@@ -267,21 +267,38 @@ isp_video_far_end(struct isp_video *video)
 	media_entity_graph_walk_start(&graph, entity);
 
 	while ((entity = media_entity_graph_walk_next(&graph))) {
+		struct isp_video *__video;
+
+		pipe->entities |= 1 << entity->id;
+
+		if (far_end != NULL)
+			continue;
+
 		if (entity == &video->video.entity)
 			continue;
 
 		if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE)
 			continue;
 
-		far_end = to_isp_video(media_entity_to_video_device(entity));
-		if (far_end->type != video->type)
-			break;
-
-		far_end = NULL;
+		__video = to_isp_video(media_entity_to_video_device(entity));
+		if (__video->type != video->type)
+			far_end = __video;
 	}
 
 	mutex_unlock(&mdev->graph_mutex);
-	return far_end;
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		pipe->input = far_end;
+		pipe->output = video;
+	} else {
+		if (far_end == NULL)
+			return -EPIPE;
+
+		pipe->input = video;
+		pipe->output = far_end;
+	}
+
+	return 0;
 }
 
 /*
@@ -972,7 +989,6 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	struct isp_video *video = video_drvdata(file);
 	enum isp_pipeline_state state;
 	struct isp_pipeline *pipe;
-	struct isp_video *far_end;
 	unsigned long flags;
 	int ret;
 
@@ -992,6 +1008,8 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	pipe = video->video.entity.pipe
 	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
 
+	pipe->entities = 0;
+
 	if (video->isp->pdata->set_constraints)
 		video->isp->pdata->set_constraints(video->isp, true);
 	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
@@ -1011,25 +1029,14 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	video->bpl_padding = ret;
 	video->bpl_value = vfh->format.fmt.pix.bytesperline;
 
-	/* Find the ISP video node connected at the far end of the pipeline and
-	 * update the pipeline.
-	 */
-	far_end = isp_video_far_end(video);
+	ret = isp_video_get_graph_data(video, pipe);
+	if (ret < 0)
+		goto err_check_format;
 
-	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
-		pipe->input = far_end;
-		pipe->output = video;
-	} else {
-		if (far_end == NULL) {
-			ret = -EPIPE;
-			goto err_check_format;
-		}
-
+	else
 		state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
-		pipe->input = video;
-		pipe->output = far_end;
-	}
 
 	/* Validate the pipeline and update its state. */
 	ret = isp_video_validate_pipeline(pipe);
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index d91bdb9..c9187cb 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -88,6 +88,7 @@ enum isp_pipeline_state {
 /*
  * struct isp_pipeline - An ISP hardware pipeline
  * @error: A hardware error occurred during capture
+ * @entities: Bitmask of entities in the pipeline (indexed by entity ID)
  */
 struct isp_pipeline {
 	struct media_pipeline pipe;
@@ -96,6 +97,7 @@ struct isp_pipeline {
 	enum isp_pipeline_stream_state stream_state;
 	struct isp_video *input;
 	struct isp_video *output;
+	u32 entities;
 	unsigned long l3_ick;
 	unsigned int max_rate;
 	atomic_t frame_number;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.3 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-09 20:31           ` [PATCH v5.3 " Sakari Ailus
@ 2012-03-09 20:34             ` Laurent Pinchart
  0 siblings, 0 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-09 20:34 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, hverkuil, teturtia, dacohen, snjw23,
	andriy.shevchenko, t.stanislaws, tuukkat76, k.debski, riverful,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Friday 09 March 2012 22:31:25 Sakari Ailus wrote:
> Collect entities which are part of the pipeline into a single bit mask.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.3 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-07 10:35   ` Laurent Pinchart
  2012-03-07 17:20     ` Sakari Ailus
@ 2012-03-08 17:05     ` Sakari Ailus
  1 sibling, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-08 17:05 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Collect entities which are part of the pipeline into a single bit mask.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispvideo.c |   48 ++++++++++++++++---------------
 drivers/media/video/omap3isp/ispvideo.h |    2 +
 2 files changed, 27 insertions(+), 23 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index d34f690..7411076 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -255,8 +255,9 @@ isp_video_remote_subdev(struct isp_video *video, u32 *pad)
 }
 
 /* Return a pointer to the ISP video instance at the far end of the pipeline. */
-static struct isp_video *
-isp_video_far_end(struct isp_video *video)
+static int isp_video_get_graph_data(struct isp_video *video,
+				    struct isp_pipeline *pipe,
+				    enum isp_pipeline_state *state)
 {
 	struct media_entity_graph graph;
 	struct media_entity *entity = &video->video.entity;
@@ -267,6 +268,8 @@ isp_video_far_end(struct isp_video *video)
 	media_entity_graph_walk_start(&graph, entity);
 
 	while ((entity = media_entity_graph_walk_next(&graph))) {
+		pipe->entities |= 1 << entity->id;
+
 		if (entity == &video->video.entity)
 			continue;
 
@@ -281,7 +284,21 @@ isp_video_far_end(struct isp_video *video)
 	}
 
 	mutex_unlock(&mdev->graph_mutex);
-	return far_end;
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		*state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
+		pipe->input = far_end;
+		pipe->output = video;
+	} else {
+		if (far_end == NULL)
+			return -EPIPE;
+
+		*state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
+		pipe->input = video;
+		pipe->output = far_end;
+	}
+
+	return 0;
 }
 
 /*
@@ -972,7 +989,6 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	struct isp_video *video = video_drvdata(file);
 	enum isp_pipeline_state state;
 	struct isp_pipeline *pipe;
-	struct isp_video *far_end;
 	unsigned long flags;
 	int ret;
 
@@ -992,6 +1008,8 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	pipe = video->video.entity.pipe
 	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
 
+	pipe->entities = 0;
+
 	if (video->isp->pdata->set_constraints)
 		video->isp->pdata->set_constraints(video->isp, true);
 	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
@@ -1011,25 +1029,9 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	video->bpl_padding = ret;
 	video->bpl_value = vfh->format.fmt.pix.bytesperline;
 
-	/* Find the ISP video node connected at the far end of the pipeline and
-	 * update the pipeline.
-	 */
-	far_end = isp_video_far_end(video);
-
-	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
-		pipe->input = far_end;
-		pipe->output = video;
-	} else {
-		if (far_end == NULL) {
-			ret = -EPIPE;
-			goto err_check_format;
-		}
-
-		state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
-		pipe->input = video;
-		pipe->output = far_end;
-	}
+	ret = isp_video_get_graph_data(video, pipe, &state);
+	if (ret < 0)
+		goto err_check_format;
 
 	/* Validate the pipeline and update its state. */
 	ret = isp_video_validate_pipeline(pipe);
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index d91bdb91..c9187cb 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -88,6 +88,7 @@ enum isp_pipeline_state {
 /*
  * struct isp_pipeline - An ISP hardware pipeline
  * @error: A hardware error occurred during capture
+ * @entities: Bitmask of entities in the pipeline (indexed by entity ID)
  */
 struct isp_pipeline {
 	struct media_pipeline pipe;
@@ -96,6 +97,7 @@ struct isp_pipeline {
 	enum isp_pipeline_stream_state stream_state;
 	struct isp_video *input;
 	struct isp_video *output;
+	u32 entities;
 	unsigned long l3_ick;
 	unsigned int max_rate;
 	atomic_t frame_number;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-06 16:33 ` [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline Sakari Ailus
  2012-03-07 10:35   ` Laurent Pinchart
@ 2012-03-07 10:50   ` Laurent Pinchart
  2012-03-07 15:24     ` Sakari Ailus
  1 sibling, 1 reply; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 10:50 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Another comment.

On Tuesday 06 March 2012 18:33:06 Sakari Ailus wrote:
> Collect entities which are part of the pipeline into a single bit mask.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

[snip]

> diff --git a/drivers/media/video/omap3isp/ispvideo.h
> b/drivers/media/video/omap3isp/ispvideo.h index d91bdb91..0423c9d 100644
> --- a/drivers/media/video/omap3isp/ispvideo.h
> +++ b/drivers/media/video/omap3isp/ispvideo.h
> @@ -96,6 +96,7 @@ struct isp_pipeline {
>  	enum isp_pipeline_stream_state stream_state;
>  	struct isp_video *input;
>  	struct isp_video *output;
> +	u32 entities;
>  	unsigned long l3_ick;
>  	unsigned int max_rate;
>  	atomic_t frame_number;

Could you please update the structure documentation ?

@entities: Bitmask of entities in the pipeline (indexed by entity ID)

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline
  2012-03-07 10:50   ` [PATCH v5 " Laurent Pinchart
@ 2012-03-07 15:24     ` Sakari Ailus
  0 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 15:24 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

On Wed, Mar 07, 2012 at 11:50:19AM +0100, Laurent Pinchart wrote:
> Hi Sakari,
> 
> Another comment.
> 
> On Tuesday 06 March 2012 18:33:06 Sakari Ailus wrote:
> > Collect entities which are part of the pipeline into a single bit mask.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> 
> [snip]
> 
> > diff --git a/drivers/media/video/omap3isp/ispvideo.h
> > b/drivers/media/video/omap3isp/ispvideo.h index d91bdb91..0423c9d 100644
> > --- a/drivers/media/video/omap3isp/ispvideo.h
> > +++ b/drivers/media/video/omap3isp/ispvideo.h
> > @@ -96,6 +96,7 @@ struct isp_pipeline {
> >  	enum isp_pipeline_stream_state stream_state;
> >  	struct isp_video *input;
> >  	struct isp_video *output;
> > +	u32 entities;
> >  	unsigned long l3_ick;
> >  	unsigned int max_rate;
> >  	atomic_t frame_number;
> 
> Could you please update the structure documentation ?
> 
> @entities: Bitmask of entities in the pipeline (indexed by entity ID)

Sure. I'll take that from your patch. ;-)

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 26/35] omap3isp: Add information on external subdev to struct isp_pipeline
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (24 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs() Sakari Ailus
                   ` (8 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add pointer to external subdev, pixel rate of the external subdev and bpp of
the format to struct isp_pipeline.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/omap3isp/ispvideo.h |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index 0423c9d..8c16156 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -103,6 +103,9 @@ struct isp_pipeline {
 	bool do_propagation; /* of frame number */
 	bool error;
 	struct v4l2_fract max_timeperframe;
+	struct v4l2_subdev *external;
+	unsigned int external_rate;
+	unsigned int external_bpp;
 };
 
 #define to_isp_pipeline(__e) \
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs()
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (25 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 26/35] omap3isp: Add information on external subdev to struct isp_pipeline Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-07 10:43   ` Laurent Pinchart
  2012-03-06 16:33 ` [PATCH v5 28/35] omap3isp: Use external rate instead of vpcfg Sakari Ailus
                   ` (7 subsequent siblings)
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

isp_video_check_external_subdevs() will retrieve external subdev's
bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon
time. isp_video_check_external_subdevs() is called after pipeline
validation.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispvideo.c |   75 +++++++++++++++++++++++++++++++
 1 files changed, 75 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 4bc9cca..ef5c770 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -934,6 +934,77 @@ isp_video_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 					  file->f_flags & O_NONBLOCK);
 }
 
+static int isp_video_check_external_subdevs(struct isp_pipeline *pipe)
+{
+	struct isp_device *isp =
+		container_of(pipe, struct isp_video, pipe)->isp;
+	struct media_entity *ents[] = {
+		&isp->isp_csi2a.subdev.entity,
+		&isp->isp_csi2c.subdev.entity,
+		&isp->isp_ccp2.subdev.entity,
+		&isp->isp_ccdc.subdev.entity
+	};
+	struct media_pad *source_pad;
+	struct media_entity *source = NULL;
+	struct media_entity *sink;
+	struct v4l2_subdev_format fmt;
+	struct v4l2_ext_controls ctrls;
+	struct v4l2_ext_control ctrl;
+	int i;
+	int ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(ents); i++) {
+		/* Is the entity part of the pipeline? */
+		if (!(pipe->entities & (1 << ents[i]->id)))
+			continue;
+
+		/* ISP entities have always sink pad == 0. Find source. */
+		source_pad = media_entity_remote_source(&ents[i]->pads[0]);
+
+		if (source_pad == NULL)
+			continue;
+
+		source = source_pad->entity;
+		sink = ents[i];
+		break;
+	}
+
+	if (!source || media_entity_type(source) != MEDIA_ENT_T_V4L2_SUBDEV)
+		return 0;
+
+	pipe->external = media_entity_to_v4l2_subdev(source);
+
+	fmt.pad = source_pad->index;
+	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	ret = v4l2_subdev_call(media_entity_to_v4l2_subdev(sink),
+			       pad, get_fmt, NULL, &fmt);
+	BUG_ON(ret < 0);
+
+	pipe->external_bpp = omap3isp_video_format_info(
+		fmt.format.code)->bpp;
+
+	memset(&ctrls, 0, sizeof(ctrls));
+	memset(&ctrl, 0, sizeof(ctrl));
+
+	ctrl.id = V4L2_CID_PIXEL_RATE;
+
+	ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(ctrl.id);
+	ctrls.count = 1;
+	ctrls.controls = &ctrl;
+
+	ret = v4l2_g_ext_ctrls(pipe->external->ctrl_handler, &ctrls);
+	if (ret < 0) {
+		dev_warn(isp->dev,
+			 "no pixel rate control in subdev %s\n",
+			 pipe->external->name);
+		return ret;
+	}
+
+	pipe->external_rate = ctrl.value64;
+
+	return 0;
+}
+
 /*
  * Stream management
  *
@@ -1010,6 +1081,10 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	while ((entity = media_entity_graph_walk_next(&graph)))
 		pipe->entities |= 1 << entity->id;
 
+	ret = isp_video_check_external_subdevs(pipe);
+	if (ret < 0)
+		goto err_check_format;
+
 	/* Verify that the currently configured format matches the output of
 	 * the connected subdev.
 	 */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs()
  2012-03-06 16:33 ` [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs() Sakari Ailus
@ 2012-03-07 10:43   ` Laurent Pinchart
  2012-03-07 17:49     ` Sakari Ailus
  2012-03-07 18:14     ` [PATCH v5.1 " Sakari Ailus
  0 siblings, 2 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 10:43 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:33:08 Sakari Ailus wrote:
> isp_video_check_external_subdevs() will retrieve external subdev's
> bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon
> time. isp_video_check_external_subdevs() is called after pipeline
> validation.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
>  drivers/media/video/omap3isp/ispvideo.c |   75 ++++++++++++++++++++++++++++
>  1 files changed, 75 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/media/video/omap3isp/ispvideo.c
> b/drivers/media/video/omap3isp/ispvideo.c index 4bc9cca..ef5c770 100644
> --- a/drivers/media/video/omap3isp/ispvideo.c
> +++ b/drivers/media/video/omap3isp/ispvideo.c
> @@ -934,6 +934,77 @@ isp_video_dqbuf(struct file *file, void *fh, struct
> v4l2_buffer *b) file->f_flags & O_NONBLOCK);
>  }
> 
> +static int isp_video_check_external_subdevs(struct isp_pipeline *pipe)
> +{
> +	struct isp_device *isp =
> +		container_of(pipe, struct isp_video, pipe)->isp;

Any reason not to pass isp_device * from the caller to this function ?

> +	struct media_entity *ents[] = {
> +		&isp->isp_csi2a.subdev.entity,
> +		&isp->isp_csi2c.subdev.entity,
> +		&isp->isp_ccp2.subdev.entity,
> +		&isp->isp_ccdc.subdev.entity
> +	};
> +	struct media_pad *source_pad;
> +	struct media_entity *source = NULL;
> +	struct media_entity *sink;
> +	struct v4l2_subdev_format fmt;
> +	struct v4l2_ext_controls ctrls;
> +	struct v4l2_ext_control ctrl;
> +	int i;

i is allowed to be unsigned in this driver as well ;-)

> +	int ret = 0;
> +
> +	for (i = 0; i < ARRAY_SIZE(ents); i++) {
> +		/* Is the entity part of the pipeline? */
> +		if (!(pipe->entities & (1 << ents[i]->id)))
> +			continue;
> +
> +		/* ISP entities have always sink pad == 0. Find source. */
> +		source_pad = media_entity_remote_source(&ents[i]->pads[0]);
> +

Don't you usually avoid blank lines between a variable assignment and checking 
it for an error condition ?

> +		if (source_pad == NULL)
> +			continue;
> +
> +		source = source_pad->entity;
> +		sink = ents[i];
> +		break;
> +	}
> +
> +	if (!source || media_entity_type(source) != MEDIA_ENT_T_V4L2_SUBDEV)
> +		return 0;
> +
> +	pipe->external = media_entity_to_v4l2_subdev(source);
> +
> +	fmt.pad = source_pad->index;
> +	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> +	ret = v4l2_subdev_call(media_entity_to_v4l2_subdev(sink),
> +			       pad, get_fmt, NULL, &fmt);
> +	BUG_ON(ret < 0);

That's a bit harsh. I'd rather return an error.

> +
> +	pipe->external_bpp = omap3isp_video_format_info(
> +		fmt.format.code)->bpp;

Maybe you could teachs emacs that 78 characters fit in a 80-columns line ? :-)

> +
> +	memset(&ctrls, 0, sizeof(ctrls));
> +	memset(&ctrl, 0, sizeof(ctrl));
> +
> +	ctrl.id = V4L2_CID_PIXEL_RATE;
> +
> +	ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(ctrl.id);

You can leave ctrl_class to 0.

> +	ctrls.count = 1;
> +	ctrls.controls = &ctrl;
> +
> +	ret = v4l2_g_ext_ctrls(pipe->external->ctrl_handler, &ctrls);
> +	if (ret < 0) {
> +		dev_warn(isp->dev,
> +			 "no pixel rate control in subdev %s\n",

No need to split this either.

> +			 pipe->external->name);
> +		return ret;
> +	}
> +
> +	pipe->external_rate = ctrl.value64;
> +
> +	return 0;
> +}
> +
>  /*
>   * Stream management
>   *
> @@ -1010,6 +1081,10 @@ isp_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) while ((entity = media_entity_graph_walk_next(&graph)))
>  		pipe->entities |= 1 << entity->id;
> 
> +	ret = isp_video_check_external_subdevs(pipe);
> +	if (ret < 0)
> +		goto err_check_format;
> +
>  	/* Verify that the currently configured format matches the output of
>  	 * the connected subdev.
>  	 */
-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs()
  2012-03-07 10:43   ` Laurent Pinchart
@ 2012-03-07 17:49     ` Sakari Ailus
  2012-03-07 18:52       ` Laurent Pinchart
  2012-03-07 18:14     ` [PATCH v5.1 " Sakari Ailus
  1 sibling, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 17:49 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

Thanks for the comments!

On Wed, Mar 07, 2012 at 11:43:31AM +0100, Laurent Pinchart wrote:
> On Tuesday 06 March 2012 18:33:08 Sakari Ailus wrote:
> > isp_video_check_external_subdevs() will retrieve external subdev's
> > bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon
> > time. isp_video_check_external_subdevs() is called after pipeline
> > validation.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> > ---
> >  drivers/media/video/omap3isp/ispvideo.c |   75 ++++++++++++++++++++++++++++
> >  1 files changed, 75 insertions(+), 0 deletions(-)
> > 
> > diff --git a/drivers/media/video/omap3isp/ispvideo.c
> > b/drivers/media/video/omap3isp/ispvideo.c index 4bc9cca..ef5c770 100644
> > --- a/drivers/media/video/omap3isp/ispvideo.c
> > +++ b/drivers/media/video/omap3isp/ispvideo.c
> > @@ -934,6 +934,77 @@ isp_video_dqbuf(struct file *file, void *fh, struct
> > v4l2_buffer *b) file->f_flags & O_NONBLOCK);
> >  }
> > 
> > +static int isp_video_check_external_subdevs(struct isp_pipeline *pipe)
> > +{
> > +	struct isp_device *isp =
> > +		container_of(pipe, struct isp_video, pipe)->isp;
> 
> Any reason not to pass isp_device * from the caller to this function ?

I didn't simply because it was unnecessary. Should I? "pipe" is needed in
any case.

> > +	struct media_entity *ents[] = {
> > +		&isp->isp_csi2a.subdev.entity,
> > +		&isp->isp_csi2c.subdev.entity,
> > +		&isp->isp_ccp2.subdev.entity,
> > +		&isp->isp_ccdc.subdev.entity
> > +	};
> > +	struct media_pad *source_pad;
> > +	struct media_entity *source = NULL;
> > +	struct media_entity *sink;
> > +	struct v4l2_subdev_format fmt;
> > +	struct v4l2_ext_controls ctrls;
> > +	struct v4l2_ext_control ctrl;
> > +	int i;
> 
> i is allowed to be unsigned in this driver as well ;-)

unsigned... we meet again!

> > +	int ret = 0;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(ents); i++) {
> > +		/* Is the entity part of the pipeline? */
> > +		if (!(pipe->entities & (1 << ents[i]->id)))
> > +			continue;
> > +
> > +		/* ISP entities have always sink pad == 0. Find source. */
> > +		source_pad = media_entity_remote_source(&ents[i]->pads[0]);
> > +
> 
> Don't you usually avoid blank lines between a variable assignment and checking 
> it for an error condition ?

We do. Fixed.

> > +		if (source_pad == NULL)
> > +			continue;
> > +
> > +		source = source_pad->entity;
> > +		sink = ents[i];
> > +		break;
> > +	}
> > +
> > +	if (!source || media_entity_type(source) != MEDIA_ENT_T_V4L2_SUBDEV)
> > +		return 0;
> > +
> > +	pipe->external = media_entity_to_v4l2_subdev(source);
> > +
> > +	fmt.pad = source_pad->index;
> > +	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > +	ret = v4l2_subdev_call(media_entity_to_v4l2_subdev(sink),
> > +			       pad, get_fmt, NULL, &fmt);
> > +	BUG_ON(ret < 0);
> 
> That's a bit harsh. I'd rather return an error.

This is a driver BUG(). At the very least it's WARN() and return an error...
I think I'll do dev_warn("message") and return the error.

I actually add the same for the case where source is NULL --- that's also a
driver bug.

> > +
> > +	pipe->external_bpp = omap3isp_video_format_info(
> > +		fmt.format.code)->bpp;
> 
> Maybe you could teachs emacs that 78 characters fit in a 80-columns line ? :-)

That's 79, not 78. And I need to scroll to the end of the line you wrote to
see it after it has been prefixed with "> ". :-D

I think I've been renaming things and as a result it did fit on a single
line.

> > +
> > +	memset(&ctrls, 0, sizeof(ctrls));
> > +	memset(&ctrl, 0, sizeof(ctrl));
> > +
> > +	ctrl.id = V4L2_CID_PIXEL_RATE;
> > +
> > +	ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(ctrl.id);
> 
> You can leave ctrl_class to 0.

Fixed.

> > +	ctrls.count = 1;
> > +	ctrls.controls = &ctrl;
> > +
> > +	ret = v4l2_g_ext_ctrls(pipe->external->ctrl_handler, &ctrls);
> > +	if (ret < 0) {
> > +		dev_warn(isp->dev,
> > +			 "no pixel rate control in subdev %s\n",
> 
> No need to split this either.

Fixed.

Kind regards,

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs()
  2012-03-07 17:49     ` Sakari Ailus
@ 2012-03-07 18:52       ` Laurent Pinchart
  2012-03-07 23:57         ` Sakari Ailus
  2012-03-08 17:04         ` [PATCH v5.3 " Sakari Ailus
  0 siblings, 2 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 18:52 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

On Wednesday 07 March 2012 19:49:46 Sakari Ailus wrote:
> On Wed, Mar 07, 2012 at 11:43:31AM +0100, Laurent Pinchart wrote:
> > On Tuesday 06 March 2012 18:33:08 Sakari Ailus wrote:
> > > isp_video_check_external_subdevs() will retrieve external subdev's
> > > bits-per-pixel and pixel rate for the use of other ISP subdevs at
> > > streamon
> > > time. isp_video_check_external_subdevs() is called after pipeline
> > > validation.
> > > 
> > > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> > > ---
> > > 
> > >  drivers/media/video/omap3isp/ispvideo.c |   75
> > >  ++++++++++++++++++++++++++++
> > >  1 files changed, 75 insertions(+), 0 deletions(-)
> > > 
> > > diff --git a/drivers/media/video/omap3isp/ispvideo.c
> > > b/drivers/media/video/omap3isp/ispvideo.c index 4bc9cca..ef5c770 100644
> > > --- a/drivers/media/video/omap3isp/ispvideo.c
> > > +++ b/drivers/media/video/omap3isp/ispvideo.c
> > > @@ -934,6 +934,77 @@ isp_video_dqbuf(struct file *file, void *fh, struct
> > > v4l2_buffer *b) file->f_flags & O_NONBLOCK);
> > > 
> > >  }
> > > 
> > > +static int isp_video_check_external_subdevs(struct isp_pipeline *pipe)
> > > +{
> > > +	struct isp_device *isp =
> > > +		container_of(pipe, struct isp_video, pipe)->isp;
> > 
> > Any reason not to pass isp_device * from the caller to this function ?
> 
> I didn't simply because it was unnecessary. Should I? "pipe" is needed in
> any case.

It will look simpler (in my opinion), and will probably generate less code, so 
I think you should.

> > > +	struct media_entity *ents[] = {
> > > +		&isp->isp_csi2a.subdev.entity,
> > > +		&isp->isp_csi2c.subdev.entity,
> > > +		&isp->isp_ccp2.subdev.entity,
> > > +		&isp->isp_ccdc.subdev.entity
> > > +	};
> > > +	struct media_pad *source_pad;
> > > +	struct media_entity *source = NULL;
> > > +	struct media_entity *sink;
> > > +	struct v4l2_subdev_format fmt;
> > > +	struct v4l2_ext_controls ctrls;
> > > +	struct v4l2_ext_control ctrl;
> > > +	int i;
> > 
> > i is allowed to be unsigned in this driver as well ;-)
> 
> unsigned... we meet again!
> 
> > > +	int ret = 0;
> > > +
> > > +	for (i = 0; i < ARRAY_SIZE(ents); i++) {
> > > +		/* Is the entity part of the pipeline? */
> > > +		if (!(pipe->entities & (1 << ents[i]->id)))
> > > +			continue;
> > > +
> > > +		/* ISP entities have always sink pad == 0. Find source. */
> > > +		source_pad = media_entity_remote_source(&ents[i]->pads[0]);
> > > +
> > 
> > Don't you usually avoid blank lines between a variable assignment and
> > checking it for an error condition ?
> 
> We do. Fixed.
> 
> > > +		if (source_pad == NULL)
> > > +			continue;
> > > +
> > > +		source = source_pad->entity;
> > > +		sink = ents[i];
> > > +		break;
> > > +	}
> > > +
> > > +	if (!source || media_entity_type(source) != MEDIA_ENT_T_V4L2_SUBDEV)
> > > +		return 0;
> > > +
> > > +	pipe->external = media_entity_to_v4l2_subdev(source);
> > > +
> > > +	fmt.pad = source_pad->index;
> > > +	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > > +	ret = v4l2_subdev_call(media_entity_to_v4l2_subdev(sink),
> > > +			       pad, get_fmt, NULL, &fmt);
> > > +	BUG_ON(ret < 0);
> > 
> > That's a bit harsh. I'd rather return an error.
> 
> This is a driver BUG(). At the very least it's WARN() and return an error...
> I think I'll do dev_warn("message") and return the error.

dev_warn + return error sounds good.

> I actually add the same for the case where source is NULL --- that's also a
> driver bug.
> 
> > > +
> > > +	pipe->external_bpp = omap3isp_video_format_info(
> > > +		fmt.format.code)->bpp;
> > 
> > Maybe you could teachs emacs that 78 characters fit in a 80-columns line ?
> > :-)
> That's 79, not 78. And I need to scroll to the end of the line you wrote to
> see it after it has been prefixed with "> ". :-D
> 
> I think I've been renaming things and as a result it did fit on a single
> line.
> 
> > > +
> > > +	memset(&ctrls, 0, sizeof(ctrls));
> > > +	memset(&ctrl, 0, sizeof(ctrl));
> > > +
> > > +	ctrl.id = V4L2_CID_PIXEL_RATE;
> > > +
> > > +	ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(ctrl.id);
> > 
> > You can leave ctrl_class to 0.
> 
> Fixed.
> 
> > > +	ctrls.count = 1;
> > > +	ctrls.controls = &ctrl;
> > > +
> > > +	ret = v4l2_g_ext_ctrls(pipe->external->ctrl_handler, &ctrls);
> > > +	if (ret < 0) {
> > > +		dev_warn(isp->dev,
> > > +			 "no pixel rate control in subdev %s\n",
> > 
> > No need to split this either.
> 
> Fixed.

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs()
  2012-03-07 18:52       ` Laurent Pinchart
@ 2012-03-07 23:57         ` Sakari Ailus
  2012-03-08 17:04         ` [PATCH v5.3 " Sakari Ailus
  1 sibling, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 23:57 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

Laurent Pinchart wrote:
> On Wednesday 07 March 2012 19:49:46 Sakari Ailus wrote:
>> On Wed, Mar 07, 2012 at 11:43:31AM +0100, Laurent Pinchart wrote:
>>> On Tuesday 06 March 2012 18:33:08 Sakari Ailus wrote:
>>>> isp_video_check_external_subdevs() will retrieve external subdev's
>>>> bits-per-pixel and pixel rate for the use of other ISP subdevs at
>>>> streamon
>>>> time. isp_video_check_external_subdevs() is called after pipeline
>>>> validation.
>>>>
>>>> Signed-off-by: Sakari Ailus<sakari.ailus@iki.fi>
>>>> ---
>>>>
>>>>   drivers/media/video/omap3isp/ispvideo.c |   75
>>>>   ++++++++++++++++++++++++++++
>>>>   1 files changed, 75 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/drivers/media/video/omap3isp/ispvideo.c
>>>> b/drivers/media/video/omap3isp/ispvideo.c index 4bc9cca..ef5c770 100644
>>>> --- a/drivers/media/video/omap3isp/ispvideo.c
>>>> +++ b/drivers/media/video/omap3isp/ispvideo.c
>>>> @@ -934,6 +934,77 @@ isp_video_dqbuf(struct file *file, void *fh, struct
>>>> v4l2_buffer *b) file->f_flags&  O_NONBLOCK);
>>>>
>>>>   }
>>>>
>>>> +static int isp_video_check_external_subdevs(struct isp_pipeline *pipe)
>>>> +{
>>>> +	struct isp_device *isp =
>>>> +		container_of(pipe, struct isp_video, pipe)->isp;
>>>
>>> Any reason not to pass isp_device * from the caller to this function ?
>>
>> I didn't simply because it was unnecessary. Should I? "pipe" is needed in
>> any case.
>
> It will look simpler (in my opinion), and will probably generate less code, so
> I think you should.

I'll change that for a new version tomorrow.

-- 
Sakari Ailus
sakari.ailus@iki.fi

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.3 27/35] omap3isp: Introduce isp_video_check_external_subdevs()
  2012-03-07 18:52       ` Laurent Pinchart
  2012-03-07 23:57         ` Sakari Ailus
@ 2012-03-08 17:04         ` Sakari Ailus
  2012-03-08 18:05           ` Laurent Pinchart
  1 sibling, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-08 17:04 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

isp_video_check_external_subdevs() will retrieve external subdev's
bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon
time. isp_video_check_external_subdevs() is called after pipeline
validation.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispvideo.c |   79 +++++++++++++++++++++++++++++++
 1 files changed, 79 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 7411076..c0286c8 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -951,6 +951,81 @@ isp_video_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 					  file->f_flags & O_NONBLOCK);
 }
 
+static int isp_video_check_external_subdevs(struct isp_video *video,
+					    struct isp_pipeline *pipe)
+{
+	struct isp_device *isp = video->isp;
+	struct media_entity *ents[] = {
+		&isp->isp_csi2a.subdev.entity,
+		&isp->isp_csi2c.subdev.entity,
+		&isp->isp_ccp2.subdev.entity,
+		&isp->isp_ccdc.subdev.entity
+	};
+	struct media_pad *source_pad;
+	struct media_entity *source = NULL;
+	struct media_entity *sink;
+	struct v4l2_subdev_format fmt;
+	struct v4l2_ext_controls ctrls;
+	struct v4l2_ext_control ctrl;
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(ents); i++) {
+		/* Is the entity part of the pipeline? */
+		if (!(pipe->entities & (1 << ents[i]->id)))
+			continue;
+
+		/* ISP entities have always sink pad == 0. Find source. */
+		source_pad = media_entity_remote_source(&ents[i]->pads[0]);
+		if (source_pad == NULL)
+			continue;
+
+		source = source_pad->entity;
+		sink = ents[i];
+		break;
+	}
+
+	if (!source) {
+		dev_warn(isp->dev, "can't find source, failing now\n");
+		return ret;
+	}
+
+	if (media_entity_type(source) != MEDIA_ENT_T_V4L2_SUBDEV)
+		return 0;
+
+	pipe->external = media_entity_to_v4l2_subdev(source);
+
+	fmt.pad = source_pad->index;
+	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	ret = v4l2_subdev_call(media_entity_to_v4l2_subdev(sink),
+			       pad, get_fmt, NULL, &fmt);
+	if (unlikely(ret < 0)) {
+		dev_warn(isp->dev, "get_fmt returned null!\n");
+		return ret;
+	}
+
+	pipe->external_bpp = omap3isp_video_format_info(fmt.format.code)->bpp;
+
+	memset(&ctrls, 0, sizeof(ctrls));
+	memset(&ctrl, 0, sizeof(ctrl));
+
+	ctrl.id = V4L2_CID_PIXEL_RATE;
+
+	ctrls.count = 1;
+	ctrls.controls = &ctrl;
+
+	ret = v4l2_g_ext_ctrls(pipe->external->ctrl_handler, &ctrls);
+	if (ret < 0) {
+		dev_warn(isp->dev, "no pixel rate control in subdev %s\n",
+			 pipe->external->name);
+		return ret;
+	}
+
+	pipe->external_rate = ctrl.value64;
+
+	return 0;
+}
+
 /*
  * Stream management
  *
@@ -1033,6 +1108,10 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	if (ret < 0)
 		goto err_check_format;
 
+	ret = isp_video_check_external_subdevs(video, pipe);
+	if (ret < 0)
+		goto err_check_format;
+
 	/* Validate the pipeline and update its state. */
 	ret = isp_video_validate_pipeline(pipe);
 	if (ret < 0)
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.3 27/35] omap3isp: Introduce isp_video_check_external_subdevs()
  2012-03-08 17:04         ` [PATCH v5.3 " Sakari Ailus
@ 2012-03-08 18:05           ` Laurent Pinchart
  0 siblings, 0 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-08 18:05 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Thursday 08 March 2012 19:04:24 Sakari Ailus wrote:
> isp_video_check_external_subdevs() will retrieve external subdev's
> bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon
> time. isp_video_check_external_subdevs() is called after pipeline
> validation.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.1 27/35] omap3isp: Introduce isp_video_check_external_subdevs()
  2012-03-07 10:43   ` Laurent Pinchart
  2012-03-07 17:49     ` Sakari Ailus
@ 2012-03-07 18:14     ` Sakari Ailus
  1 sibling, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 18:14 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

isp_video_check_external_subdevs() will retrieve external subdev's
bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon
time. isp_video_check_external_subdevs() is called after pipeline
validation.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispvideo.c |   79 +++++++++++++++++++++++++++++++
 1 files changed, 79 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 7411076..f3b82cae4 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -951,6 +951,81 @@ isp_video_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 					  file->f_flags & O_NONBLOCK);
 }
 
+static int isp_video_check_external_subdevs(struct isp_pipeline *pipe)
+{
+	struct isp_device *isp =
+		container_of(pipe, struct isp_video, pipe)->isp;
+	struct media_entity *ents[] = {
+		&isp->isp_csi2a.subdev.entity,
+		&isp->isp_csi2c.subdev.entity,
+		&isp->isp_ccp2.subdev.entity,
+		&isp->isp_ccdc.subdev.entity
+	};
+	struct media_pad *source_pad;
+	struct media_entity *source = NULL;
+	struct media_entity *sink;
+	struct v4l2_subdev_format fmt;
+	struct v4l2_ext_controls ctrls;
+	struct v4l2_ext_control ctrl;
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(ents); i++) {
+		/* Is the entity part of the pipeline? */
+		if (!(pipe->entities & (1 << ents[i]->id)))
+			continue;
+
+		/* ISP entities have always sink pad == 0. Find source. */
+		source_pad = media_entity_remote_source(&ents[i]->pads[0]);
+		if (source_pad == NULL)
+			continue;
+
+		source = source_pad->entity;
+		sink = ents[i];
+		break;
+	}
+
+	if (!source) {
+		dev_warn(isp->dev, "can't find source, failing now\n");
+		return ret;
+	}
+
+	if (media_entity_type(source) != MEDIA_ENT_T_V4L2_SUBDEV)
+		return 0;
+
+	pipe->external = media_entity_to_v4l2_subdev(source);
+
+	fmt.pad = source_pad->index;
+	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	ret = v4l2_subdev_call(media_entity_to_v4l2_subdev(sink),
+			       pad, get_fmt, NULL, &fmt);
+	if (unlikely(ret < 0)) {
+		dev_warn(isp->dev, "get_fmt returned null!\n");
+		return ret;
+	}
+
+	pipe->external_bpp = omap3isp_video_format_info(fmt.format.code)->bpp;
+
+	memset(&ctrls, 0, sizeof(ctrls));
+	memset(&ctrl, 0, sizeof(ctrl));
+
+	ctrl.id = V4L2_CID_PIXEL_RATE;
+
+	ctrls.count = 1;
+	ctrls.controls = &ctrl;
+
+	ret = v4l2_g_ext_ctrls(pipe->external->ctrl_handler, &ctrls);
+	if (ret < 0) {
+		dev_warn(isp->dev, "no pixel rate control in subdev %s\n",
+			 pipe->external->name);
+		return ret;
+	}
+
+	pipe->external_rate = ctrl.value64;
+
+	return 0;
+}
+
 /*
  * Stream management
  *
@@ -1033,6 +1108,10 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	if (ret < 0)
 		goto err_check_format;
 
+	ret = isp_video_check_external_subdevs(pipe);
+	if (ret < 0)
+		goto err_check_format;
+
 	/* Validate the pipeline and update its state. */
 	ret = isp_video_validate_pipeline(pipe);
 	if (ret < 0)
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 28/35] omap3isp: Use external rate instead of vpcfg
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (26 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs() Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-07 10:53   ` Laurent Pinchart
  2012-03-06 16:33 ` [PATCH v5 29/35] omap3isp: Default link validation for ccp2, csi2, preview and resizer Sakari Ailus
                   ` (6 subsequent siblings)
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

Access pipe->external_rate instead of isp_ccdc.vpcfg.pixelclk. Also remove
means to set the value for isp_ccdc_vpcfg.pixelclk.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/isp.c      |   14 --------------
 drivers/media/video/omap3isp/isp.h      |    1 -
 drivers/media/video/omap3isp/ispccdc.c  |    6 ++----
 drivers/media/video/omap3isp/ispccdc.h  |   10 ----------
 drivers/media/video/omap3isp/ispvideo.c |    2 +-
 5 files changed, 3 insertions(+), 30 deletions(-)

diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 12d5f92..f54953d 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -329,19 +329,6 @@ void omap3isp_configure_bridge(struct isp_device *isp,
 	isp_reg_writel(isp, ispctrl_val, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL);
 }
 
-/**
- * isp_set_pixel_clock - Configures the ISP pixel clock
- * @isp: OMAP3 ISP device
- * @pixelclk: Average pixel clock in Hz
- *
- * Set the average pixel clock required by the sensor. The ISP will use the
- * lowest possible memory bandwidth settings compatible with the clock.
- **/
-static void isp_set_pixel_clock(struct isp_device *isp, unsigned int pixelclk)
-{
-	isp->isp_ccdc.vpcfg.pixelclk = pixelclk;
-}
-
 void omap3isp_hist_dma_done(struct isp_device *isp)
 {
 	if (omap3isp_ccdc_busy(&isp->isp_ccdc) ||
@@ -2068,7 +2055,6 @@ static int isp_probe(struct platform_device *pdev)
 
 	isp->autoidle = autoidle;
 	isp->platform_cb.set_xclk = isp_set_xclk;
-	isp->platform_cb.set_pixel_clock = isp_set_pixel_clock;
 
 	mutex_init(&isp->isp_mutex);
 	spin_lock_init(&isp->stat_lock);
diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h
index 2e78041..964ab1b 100644
--- a/drivers/media/video/omap3isp/isp.h
+++ b/drivers/media/video/omap3isp/isp.h
@@ -129,7 +129,6 @@ struct isp_platform_callback {
 	int (*csiphy_config)(struct isp_csiphy *phy,
 			     struct isp_csiphy_dphy_cfg *dphy,
 			     struct isp_csiphy_lanes_cfg *lanes);
-	void (*set_pixel_clock)(struct isp_device *isp, unsigned int pixelclk);
 };
 
 /*
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index a74a797..cd1bf6d 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -836,8 +836,8 @@ static void ccdc_config_vp(struct isp_ccdc_device *ccdc)
 
 	if (pipe->input)
 		div = DIV_ROUND_UP(l3_ick, pipe->max_rate);
-	else if (ccdc->vpcfg.pixelclk)
-		div = l3_ick / ccdc->vpcfg.pixelclk;
+	else if (pipe->external_rate)
+		div = l3_ick / pipe->external_rate;
 
 	div = clamp(div, 2U, max_div);
 	fmtcfg_vp |= (div - 2) << ISPCCDC_FMTCFG_VPIF_FRQ_SHIFT;
@@ -2276,8 +2276,6 @@ int omap3isp_ccdc_init(struct isp_device *isp)
 	ccdc->clamp.oblen = 0;
 	ccdc->clamp.dcsubval = 0;
 
-	ccdc->vpcfg.pixelclk = 0;
-
 	ccdc->update = OMAP3ISP_CCDC_BLCLAMP;
 	ccdc_apply_controls(ccdc);
 
diff --git a/drivers/media/video/omap3isp/ispccdc.h b/drivers/media/video/omap3isp/ispccdc.h
index 6d0264b..e570abe 100644
--- a/drivers/media/video/omap3isp/ispccdc.h
+++ b/drivers/media/video/omap3isp/ispccdc.h
@@ -80,14 +80,6 @@ struct ispccdc_syncif {
 	u8 bt_r656_en;
 };
 
-/*
- * struct ispccdc_vp - Structure for Video Port parameters
- * @pixelclk: Input pixel clock in Hz
- */
-struct ispccdc_vp {
-	unsigned int pixelclk;
-};
-
 enum ispccdc_lsc_state {
 	LSC_STATE_STOPPED = 0,
 	LSC_STATE_STOPPING = 1,
@@ -161,7 +153,6 @@ struct ispccdc_lsc {
  * @update: Bitmask of controls to update during the next interrupt
  * @shadow_update: Controls update in progress by userspace
  * @syncif: Interface synchronization configuration
- * @vpcfg: Video port configuration
  * @underrun: A buffer underrun occurred and a new buffer has been queued
  * @state: Streaming state
  * @lock: Serializes shadow_update with interrupt handler
@@ -190,7 +181,6 @@ struct isp_ccdc_device {
 	unsigned int shadow_update;
 
 	struct ispccdc_syncif syncif;
-	struct ispccdc_vp vpcfg;
 
 	unsigned int underrun:1;
 	enum isp_pipeline_stream_state state;
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index ef5c770..6d4ad87 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -334,7 +334,7 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
 			unsigned int rate = UINT_MAX;
 
 			omap3isp_ccdc_max_rate(&isp->isp_ccdc, &rate);
-			if (isp->isp_ccdc.vpcfg.pixelclk > rate)
+			if (pipe->external_rate > rate)
 				return -ENOSPC;
 		}
 
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 28/35] omap3isp: Use external rate instead of vpcfg
  2012-03-06 16:33 ` [PATCH v5 28/35] omap3isp: Use external rate instead of vpcfg Sakari Ailus
@ 2012-03-07 10:53   ` Laurent Pinchart
  2012-03-07 17:54     ` Sakari Ailus
  2012-03-07 18:34     ` Sakari Ailus
  0 siblings, 2 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 10:53 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:33:09 Sakari Ailus wrote:
> From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> 
> Access pipe->external_rate instead of isp_ccdc.vpcfg.pixelclk. Also remove
> means to set the value for isp_ccdc_vpcfg.pixelclk.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Very nice.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

This also means that implementing support for the V4L2_CID_PIXEL_RATE control 
is required in the sensor drivers to be used with the OMAP3 ISP. I'll submit 
patches.

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 28/35] omap3isp: Use external rate instead of vpcfg
  2012-03-07 10:53   ` Laurent Pinchart
@ 2012-03-07 17:54     ` Sakari Ailus
  2012-03-07 18:34     ` Sakari Ailus
  1 sibling, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 17:54 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

On Wed, Mar 07, 2012 at 11:53:19AM +0100, Laurent Pinchart wrote:
> Hi Sakari,
> 
> Thanks for the patch.
> 
> On Tuesday 06 March 2012 18:33:09 Sakari Ailus wrote:
> > From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> > 
> > Access pipe->external_rate instead of isp_ccdc.vpcfg.pixelclk. Also remove
> > means to set the value for isp_ccdc_vpcfg.pixelclk.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> 
> Very nice.
> 
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> This also means that implementing support for the V4L2_CID_PIXEL_RATE control 
> is required in the sensor drivers to be used with the OMAP3 ISP. I'll submit 
> patches.

Thanks!

Let's see how we deal with the affected drivers...

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 28/35] omap3isp: Use external rate instead of vpcfg
  2012-03-07 10:53   ` Laurent Pinchart
  2012-03-07 17:54     ` Sakari Ailus
@ 2012-03-07 18:34     ` Sakari Ailus
  1 sibling, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 18:34 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

On Wed, Mar 07, 2012 at 11:53:19AM +0100, Laurent Pinchart wrote:
> Hi Sakari,
> 
> Thanks for the patch.
> 
> On Tuesday 06 March 2012 18:33:09 Sakari Ailus wrote:
> > From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> > 
> > Access pipe->external_rate instead of isp_ccdc.vpcfg.pixelclk. Also remove
> > means to set the value for isp_ccdc_vpcfg.pixelclk.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> 
> Very nice.
> 
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> This also means that implementing support for the V4L2_CID_PIXEL_RATE control 
> is required in the sensor drivers to be used with the OMAP3 ISP. I'll submit 
> patches.

My tree is here if you wish to try it:

<URL:http://git.linuxtv.org/sailus/media_tree.git/shortlog/refs/heads/media-for-3.4>

Cheers,

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 29/35] omap3isp: Default link validation for ccp2, csi2, preview and resizer
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (27 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 28/35] omap3isp: Use external rate instead of vpcfg Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 30/35] omap3isp: Move CCDC link validation to ccdc_link_validate() Sakari Ailus
                   ` (5 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Use default link validation for ccp2, csi2, preview and resizer. On ccp2,
csi2 and ccdc we also collect information on external subdevs as one may be
connected to those entities.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/omap3isp/ispccp2.c    |    1 +
 drivers/media/video/omap3isp/ispcsi2.c    |    1 +
 drivers/media/video/omap3isp/isppreview.c |    1 +
 drivers/media/video/omap3isp/ispresizer.c |    1 +
 4 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
index 70ddbf3..41e807f 100644
--- a/drivers/media/video/omap3isp/ispccp2.c
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -1021,6 +1021,7 @@ static int ccp2_link_setup(struct media_entity *entity,
 /* media operations */
 static const struct media_entity_operations ccp2_media_ops = {
 	.link_setup = ccp2_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
 };
 
 /*
diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/video/omap3isp/ispcsi2.c
index fcb5168..d2e1c92 100644
--- a/drivers/media/video/omap3isp/ispcsi2.c
+++ b/drivers/media/video/omap3isp/ispcsi2.c
@@ -1181,6 +1181,7 @@ static int csi2_link_setup(struct media_entity *entity,
 /* media operations */
 static const struct media_entity_operations csi2_media_ops = {
 	.link_setup = csi2_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
 };
 
 void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2)
diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
index 6d0fb2c..8545f0b 100644
--- a/drivers/media/video/omap3isp/isppreview.c
+++ b/drivers/media/video/omap3isp/isppreview.c
@@ -2076,6 +2076,7 @@ static int preview_link_setup(struct media_entity *entity,
 /* media operations */
 static const struct media_entity_operations preview_media_ops = {
 	.link_setup = preview_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
 };
 
 void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c
index 6958a9e..0fc6525 100644
--- a/drivers/media/video/omap3isp/ispresizer.c
+++ b/drivers/media/video/omap3isp/ispresizer.c
@@ -1603,6 +1603,7 @@ static int resizer_link_setup(struct media_entity *entity,
 /* media operations */
 static const struct media_entity_operations resizer_media_ops = {
 	.link_setup = resizer_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
 };
 
 void omap3isp_resizer_unregister_entities(struct isp_res_device *res)
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 30/35] omap3isp: Move CCDC link validation to ccdc_link_validate()
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (28 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 29/35] omap3isp: Default link validation for ccp2, csi2, preview and resizer Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-07 11:00   ` Laurent Pinchart
  2012-03-06 16:33 ` [PATCH v5 31/35] omap3isp: Configure CSI-2 phy based on platform data Sakari Ailus
                   ` (4 subsequent siblings)
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Perform CCDC link validation in ccdc_link_validate() instead of
isp_video_validate_pipeline(). Also perform maximum data rate check in
isp_video_check_external_subdevs().

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispccdc.c  |   65 +++++++++++++++++++++
 drivers/media/video/omap3isp/ispvideo.c |   94 ++++---------------------------
 2 files changed, 76 insertions(+), 83 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index cd1bf6d..84f230e 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -2000,6 +2000,69 @@ static int ccdc_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 }
 
 /*
+ * Decide whether desired output pixel code can be obtained with
+ * the lane shifter by shifting the input pixel code.
+ * @in: input pixelcode to shifter
+ * @out: output pixelcode from shifter
+ * @additional_shift: # of bits the sensor's LSB is offset from CAMEXT[0]
+ *
+ * return true if the combination is possible
+ * return false otherwise
+ */
+static bool ccdc_is_shiftable(enum v4l2_mbus_pixelcode in,
+			      enum v4l2_mbus_pixelcode out,
+			      unsigned int additional_shift)
+{
+	const struct isp_format_info *in_info, *out_info;
+
+	if (in == out)
+		return true;
+
+	in_info = omap3isp_video_format_info(in);
+	out_info = omap3isp_video_format_info(out);
+
+	if ((in_info->flavor == 0) || (out_info->flavor == 0))
+		return false;
+
+	if (in_info->flavor != out_info->flavor)
+		return false;
+
+	return in_info->bpp - out_info->bpp + additional_shift <= 6;
+}
+
+static int ccdc_link_validate(struct v4l2_subdev *sd,
+			      struct media_link *link,
+			      struct v4l2_subdev_format *source_fmt,
+			      struct v4l2_subdev_format *sink_fmt)
+{
+	struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
+	unsigned long parallel_shift;
+
+	/* Check if the two ends match */
+	if (source_fmt->format.width != sink_fmt->format.width ||
+	    source_fmt->format.height != sink_fmt->format.height)
+		return -EPIPE;
+
+	/* We've got a parallel sensor here. */
+	if (ccdc->input == CCDC_INPUT_PARALLEL) {
+		struct isp_parallel_platform_data *pdata =
+			&((struct isp_v4l2_subdevs_group *)
+			  media_entity_to_v4l2_subdev(link->source->entity)
+			  ->host_priv)->bus.parallel;
+		parallel_shift = pdata->data_lane_shift * 2;
+	} else {
+		parallel_shift = 0;
+	}
+
+	/* Lane shifter may be used to drop bits on CCDC sink pad */
+	if (!ccdc_is_shiftable(source_fmt->format.code,
+			       sink_fmt->format.code, parallel_shift))
+		return -EPIPE;
+
+	return 0;
+}
+
+/*
  * ccdc_init_formats - Initialize formats on all pads
  * @sd: ISP CCDC V4L2 subdevice
  * @fh: V4L2 subdev file handle
@@ -2041,6 +2104,7 @@ static const struct v4l2_subdev_pad_ops ccdc_v4l2_pad_ops = {
 	.enum_frame_size = ccdc_enum_frame_size,
 	.get_fmt = ccdc_get_format,
 	.set_fmt = ccdc_set_format,
+	.link_validate = ccdc_link_validate,
 };
 
 /* V4L2 subdev operations */
@@ -2150,6 +2214,7 @@ static int ccdc_link_setup(struct media_entity *entity,
 /* media operations */
 static const struct media_entity_operations ccdc_media_ops = {
 	.link_setup = ccdc_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
 };
 
 void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc)
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 6d4ad87..51075b3 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -130,37 +130,6 @@ omap3isp_video_format_info(enum v4l2_mbus_pixelcode code)
 }
 
 /*
- * Decide whether desired output pixel code can be obtained with
- * the lane shifter by shifting the input pixel code.
- * @in: input pixelcode to shifter
- * @out: output pixelcode from shifter
- * @additional_shift: # of bits the sensor's LSB is offset from CAMEXT[0]
- *
- * return true if the combination is possible
- * return false otherwise
- */
-static bool isp_video_is_shiftable(enum v4l2_mbus_pixelcode in,
-		enum v4l2_mbus_pixelcode out,
-		unsigned int additional_shift)
-{
-	const struct isp_format_info *in_info, *out_info;
-
-	if (in == out)
-		return true;
-
-	in_info = omap3isp_video_format_info(in);
-	out_info = omap3isp_video_format_info(out);
-
-	if ((in_info->flavor == 0) || (out_info->flavor == 0))
-		return false;
-
-	if (in_info->flavor != out_info->flavor)
-		return false;
-
-	return in_info->bpp - out_info->bpp + additional_shift <= 6;
-}
-
-/*
  * isp_video_mbus_to_pix - Convert v4l2_mbus_framefmt to v4l2_pix_format
  * @video: ISP video instance
  * @mbus: v4l2_mbus_framefmt format (input)
@@ -298,50 +267,24 @@ isp_video_far_end(struct isp_video *video)
 static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
 {
 	struct isp_device *isp = pipe->output->isp;
-	struct v4l2_subdev_format fmt_source;
-	struct v4l2_subdev_format fmt_sink;
 	struct media_pad *pad;
 	struct v4l2_subdev *subdev;
-	int ret;
 
 	subdev = isp_video_remote_subdev(pipe->output, NULL);
 	if (subdev == NULL)
 		return -EPIPE;
 
 	while (1) {
-		unsigned int shifter_link;
 		/* Retrieve the sink format */
 		pad = &subdev->entity.pads[0];
 		if (!(pad->flags & MEDIA_PAD_FL_SINK))
 			break;
 
-		fmt_sink.pad = pad->index;
-		fmt_sink.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-		ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_sink);
-		if (ret < 0 && ret != -ENOIOCTLCMD)
-			return -EPIPE;
-
 		/* Update the maximum frame rate */
 		if (subdev == &isp->isp_res.subdev)
 			omap3isp_resizer_max_rate(&isp->isp_res,
 						  &pipe->max_rate);
 
-		/* Check ccdc maximum data rate when data comes from sensor
-		 * TODO: Include ccdc rate in pipe->max_rate and compare the
-		 *       total pipe rate with the input data rate from sensor.
-		 */
-		if (subdev == &isp->isp_ccdc.subdev && pipe->input == NULL) {
-			unsigned int rate = UINT_MAX;
-
-			omap3isp_ccdc_max_rate(&isp->isp_ccdc, &rate);
-			if (pipe->external_rate > rate)
-				return -ENOSPC;
-		}
-
-		/* If sink pad is on CCDC, the link has the lane shifter
-		 * in the middle of it. */
-		shifter_link = subdev == &isp->isp_ccdc.subdev;
-
 		/* Retrieve the source format. Return an error if no source
 		 * entity can be found, and stop checking the pipeline if the
 		 * source entity isn't a subdev.
@@ -354,32 +297,6 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
 			break;
 
 		subdev = media_entity_to_v4l2_subdev(pad->entity);
-
-		fmt_source.pad = pad->index;
-		fmt_source.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-		ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_source);
-		if (ret < 0 && ret != -ENOIOCTLCMD)
-			return -EPIPE;
-
-		/* Check if the two ends match */
-		if (fmt_source.format.width != fmt_sink.format.width ||
-		    fmt_source.format.height != fmt_sink.format.height)
-			return -EPIPE;
-
-		if (shifter_link) {
-			unsigned int parallel_shift = 0;
-			if (isp->isp_ccdc.input == CCDC_INPUT_PARALLEL) {
-				struct isp_parallel_platform_data *pdata =
-					&((struct isp_v4l2_subdevs_group *)
-					      subdev->host_priv)->bus.parallel;
-				parallel_shift = pdata->data_lane_shift * 2;
-			}
-			if (!isp_video_is_shiftable(fmt_source.format.code,
-						fmt_sink.format.code,
-						parallel_shift))
-				return -EPIPE;
-		} else if (fmt_source.format.code != fmt_sink.format.code)
-			return -EPIPE;
 	}
 
 	return 0;
@@ -950,6 +867,7 @@ static int isp_video_check_external_subdevs(struct isp_pipeline *pipe)
 	struct v4l2_subdev_format fmt;
 	struct v4l2_ext_controls ctrls;
 	struct v4l2_ext_control ctrl;
+	unsigned int rate = UINT_MAX;
 	int i;
 	int ret = 0;
 
@@ -1002,6 +920,16 @@ static int isp_video_check_external_subdevs(struct isp_pipeline *pipe)
 
 	pipe->external_rate = ctrl.value64;
 
+	if (pipe->entities & (1 << isp->isp_ccdc.subdev.entity.id)) {
+		/*
+		 * Check that maximum allowed CCDC pixel rate isn't
+		 * exceeded by the pixel rate.
+		 */
+		omap3isp_ccdc_max_rate(&isp->isp_ccdc, &rate);
+		if (pipe->external_rate > rate)
+			return -ENOSPC;
+	}
+
 	return 0;
 }
 
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 30/35] omap3isp: Move CCDC link validation to ccdc_link_validate()
  2012-03-06 16:33 ` [PATCH v5 30/35] omap3isp: Move CCDC link validation to ccdc_link_validate() Sakari Ailus
@ 2012-03-07 11:00   ` Laurent Pinchart
  2012-03-07 18:02     ` Sakari Ailus
  0 siblings, 1 reply; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 11:00 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:33:11 Sakari Ailus wrote:
> Perform CCDC link validation in ccdc_link_validate() instead of
> isp_video_validate_pipeline(). Also perform maximum data rate check in
> isp_video_check_external_subdevs().
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

[snip]

> diff --git a/drivers/media/video/omap3isp/ispvideo.c
> b/drivers/media/video/omap3isp/ispvideo.c index 6d4ad87..51075b3 100644
> --- a/drivers/media/video/omap3isp/ispvideo.c
> +++ b/drivers/media/video/omap3isp/ispvideo.c

[snip]

> @@ -950,6 +867,7 @@ static int isp_video_check_external_subdevs(struct
> isp_pipeline *pipe) struct v4l2_subdev_format fmt;
>  	struct v4l2_ext_controls ctrls;
>  	struct v4l2_ext_control ctrl;
> +	unsigned int rate = UINT_MAX;

You can move this variable inside the if statement below.

>  	int i;
>  	int ret = 0;
> 
> @@ -1002,6 +920,16 @@ static int isp_video_check_external_subdevs(struct
> isp_pipeline *pipe)
> 
>  	pipe->external_rate = ctrl.value64;
> 
> +	if (pipe->entities & (1 << isp->isp_ccdc.subdev.entity.id)) {
> +		/*
> +		 * Check that maximum allowed CCDC pixel rate isn't
> +		 * exceeded by the pixel rate.

What's wrong with 80 columns, really ? :-)

> +		 */
> +		omap3isp_ccdc_max_rate(&isp->isp_ccdc, &rate);
> +		if (pipe->external_rate > rate)
> +			return -ENOSPC;
> +	}
> +
>  	return 0;
>  }

Pending those two changes,

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 30/35] omap3isp: Move CCDC link validation to ccdc_link_validate()
  2012-03-07 11:00   ` Laurent Pinchart
@ 2012-03-07 18:02     ` Sakari Ailus
  0 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 18:02 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

Thanks for the comments.

On Wed, Mar 07, 2012 at 12:00:48PM +0100, Laurent Pinchart wrote:
> On Tuesday 06 March 2012 18:33:11 Sakari Ailus wrote:
> > Perform CCDC link validation in ccdc_link_validate() instead of
> > isp_video_validate_pipeline(). Also perform maximum data rate check in
> > isp_video_check_external_subdevs().
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> 
> [snip]
> 
> > diff --git a/drivers/media/video/omap3isp/ispvideo.c
> > b/drivers/media/video/omap3isp/ispvideo.c index 6d4ad87..51075b3 100644
> > --- a/drivers/media/video/omap3isp/ispvideo.c
> > +++ b/drivers/media/video/omap3isp/ispvideo.c
> 
> [snip]
> 
> > @@ -950,6 +867,7 @@ static int isp_video_check_external_subdevs(struct
> > isp_pipeline *pipe) struct v4l2_subdev_format fmt;
> >  	struct v4l2_ext_controls ctrls;
> >  	struct v4l2_ext_control ctrl;
> > +	unsigned int rate = UINT_MAX;
> 
> You can move this variable inside the if statement below.

Fixed.

> >  	int i;
> >  	int ret = 0;
> > 
> > @@ -1002,6 +920,16 @@ static int isp_video_check_external_subdevs(struct
> > isp_pipeline *pipe)
> > 
> >  	pipe->external_rate = ctrl.value64;
> > 
> > +	if (pipe->entities & (1 << isp->isp_ccdc.subdev.entity.id)) {
> > +		/*
> > +		 * Check that maximum allowed CCDC pixel rate isn't
> > +		 * exceeded by the pixel rate.
> 
> What's wrong with 80 columns, really ? :-)

Is it said somewhere in CodingStyle the comments have to be wrapped at 80
characters and no earlier? It's like speed limits: you are allowed to drive
slower than the limit. :-)

> > +		 */
> > +		omap3isp_ccdc_max_rate(&isp->isp_ccdc, &rate);
> > +		if (pipe->external_rate > rate)
> > +			return -ENOSPC;
> > +	}
> > +
> >  	return 0;
> >  }
> 
> Pending those two changes,
> 
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks. :-)

Cheers,

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 31/35] omap3isp: Configure CSI-2 phy based on platform data
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (29 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 30/35] omap3isp: Move CCDC link validation to ccdc_link_validate() Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 32/35] omap3isp: Add resizer data rate configuration to resizer_link_validate Sakari Ailus
                   ` (3 subsequent siblings)
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Configure CSI-2 phy based on platform data in the ISP driver. For that, the
new V4L2_CID_IMAGE_SOURCE_PIXEL_RATE control is used. Previously the same
was configured from the board code.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/video/omap3isp/isp.h       |    3 -
 drivers/media/video/omap3isp/ispcsiphy.c |  168 +++++++++++++++++-------------
 drivers/media/video/omap3isp/ispcsiphy.h |   10 --
 3 files changed, 97 insertions(+), 84 deletions(-)

diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h
index 964ab1b..7533a40 100644
--- a/drivers/media/video/omap3isp/isp.h
+++ b/drivers/media/video/omap3isp/isp.h
@@ -126,9 +126,6 @@ struct isp_reg {
 
 struct isp_platform_callback {
 	u32 (*set_xclk)(struct isp_device *isp, u32 xclk, u8 xclksel);
-	int (*csiphy_config)(struct isp_csiphy *phy,
-			     struct isp_csiphy_dphy_cfg *dphy,
-			     struct isp_csiphy_lanes_cfg *lanes);
 };
 
 /*
diff --git a/drivers/media/video/omap3isp/ispcsiphy.c b/drivers/media/video/omap3isp/ispcsiphy.c
index 5be37ce..902477d 100644
--- a/drivers/media/video/omap3isp/ispcsiphy.c
+++ b/drivers/media/video/omap3isp/ispcsiphy.c
@@ -28,41 +28,13 @@
 #include <linux/device.h>
 #include <linux/regulator/consumer.h>
 
+#include "../../../../arch/arm/mach-omap2/control.h"
+
 #include "isp.h"
 #include "ispreg.h"
 #include "ispcsiphy.h"
 
 /*
- * csiphy_lanes_config - Configuration of CSIPHY lanes.
- *
- * Updates HW configuration.
- * Called with phy->mutex taken.
- */
-static void csiphy_lanes_config(struct isp_csiphy *phy)
-{
-	unsigned int i;
-	u32 reg;
-
-	reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG);
-
-	for (i = 0; i < phy->num_data_lanes; i++) {
-		reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) |
-			 ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1));
-		reg |= (phy->lanes.data[i].pol <<
-			ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1));
-		reg |= (phy->lanes.data[i].pos <<
-			ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1));
-	}
-
-	reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK |
-		 ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK);
-	reg |= phy->lanes.clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT;
-	reg |= phy->lanes.clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT;
-
-	isp_reg_writel(phy->isp, reg, phy->cfg_regs, ISPCSI2_PHY_CFG);
-}
-
-/*
  * csiphy_power_autoswitch_enable
  * @enable: Sets or clears the autoswitch function enable flag.
  */
@@ -107,46 +79,31 @@ static int csiphy_set_power(struct isp_csiphy *phy, u32 power)
 }
 
 /*
- * csiphy_dphy_config - Configure CSI2 D-PHY parameters.
- *
- * Called with phy->mutex taken.
+ * TCLK values are OK at their reset values
  */
-static void csiphy_dphy_config(struct isp_csiphy *phy)
-{
-	u32 reg;
-
-	/* Set up ISPCSIPHY_REG0 */
-	reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG0);
-
-	reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK |
-		 ISPCSIPHY_REG0_THS_SETTLE_MASK);
-	reg |= phy->dphy.ths_term << ISPCSIPHY_REG0_THS_TERM_SHIFT;
-	reg |= phy->dphy.ths_settle << ISPCSIPHY_REG0_THS_SETTLE_SHIFT;
-
-	isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG0);
-
-	/* Set up ISPCSIPHY_REG1 */
-	reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG1);
-
-	reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK |
-		 ISPCSIPHY_REG1_TCLK_MISS_MASK |
-		 ISPCSIPHY_REG1_TCLK_SETTLE_MASK);
-	reg |= phy->dphy.tclk_term << ISPCSIPHY_REG1_TCLK_TERM_SHIFT;
-	reg |= phy->dphy.tclk_miss << ISPCSIPHY_REG1_TCLK_MISS_SHIFT;
-	reg |= phy->dphy.tclk_settle << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT;
+#define TCLK_TERM	0
+#define TCLK_MISS	1
+#define TCLK_SETTLE	14
 
-	isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG1);
-}
-
-static int csiphy_config(struct isp_csiphy *phy,
-			 struct isp_csiphy_dphy_cfg *dphy,
-			 struct isp_csiphy_lanes_cfg *lanes)
+static int omap3isp_csiphy_config(struct isp_csiphy *phy)
 {
+	struct isp_csi2_device *csi2 = phy->csi2;
+	struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity);
+	struct isp_v4l2_subdevs_group *subdevs = pipe->external->host_priv;
+	struct isp_csiphy_lanes_cfg *lanes;
+	int csi2_ddrclk_khz;
 	unsigned int used_lanes = 0;
 	unsigned int i;
+	u32 reg;
+
+	if (subdevs->interface == ISP_INTERFACE_CCP2B_PHY1
+	    || subdevs->interface == ISP_INTERFACE_CCP2B_PHY2)
+		lanes = &subdevs->bus.ccp2.lanecfg;
+	else
+		lanes = &subdevs->bus.csi2.lanecfg;
 
 	/* Clock and data lanes verification */
-	for (i = 0; i < phy->num_data_lanes; i++) {
+	for (i = 0; i < csi2->phy->num_data_lanes; i++) {
 		if (lanes->data[i].pol > 1 || lanes->data[i].pos > 3)
 			return -EINVAL;
 
@@ -162,10 +119,80 @@ static int csiphy_config(struct isp_csiphy *phy,
 	if (lanes->clk.pos == 0 || used_lanes & (1 << lanes->clk.pos))
 		return -EINVAL;
 
-	mutex_lock(&phy->mutex);
-	phy->dphy = *dphy;
-	phy->lanes = *lanes;
-	mutex_unlock(&phy->mutex);
+	/* FIXME: Do 34xx / 35xx require something here? */
+	if (cpu_is_omap3630()) {
+		u32 cam_phy_ctrl =
+			omap_readl(OMAP343X_CTRL_BASE
+				   + OMAP3630_CONTROL_CAMERA_PHY_CTRL);
+
+		/*
+		 * SCM.CONTROL_CAMERA_PHY_CTRL
+		 * - bit[4]    : CSIPHY1 data sent to CSIB
+		 * - bit [3:2] : CSIPHY1 config: 00 d-phy, 01/10 ccp2
+		 * - bit [1:0] : CSIPHY2 config: 00 d-phy, 01/10 ccp2
+		 */
+		if (subdevs->interface == ISP_INTERFACE_CCP2B_PHY1)
+			cam_phy_ctrl |= 1 << 2;
+		else if (subdevs->interface == ISP_INTERFACE_CSI2C_PHY1)
+			cam_phy_ctrl &= ~(1 << 2);
+
+		if (subdevs->interface == ISP_INTERFACE_CCP2B_PHY2)
+			cam_phy_ctrl |= 1;
+		else if (subdevs->interface == ISP_INTERFACE_CSI2A_PHY2)
+			cam_phy_ctrl &= ~1;
+
+		omap_writel(cam_phy_ctrl,
+			    OMAP343X_CTRL_BASE
+			    + OMAP3630_CONTROL_CAMERA_PHY_CTRL);
+	}
+
+	/* DPHY timing configuration */
+	/* CSI-2 is DDR and we only count used lanes. */
+	csi2_ddrclk_khz = pipe->external_rate / 1000
+		/ (2 * hweight32(used_lanes)) * pipe->external_bpp;
+
+	reg = isp_reg_readl(csi2->isp, csi2->phy->phy_regs, ISPCSIPHY_REG0);
+
+	reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK |
+		 ISPCSIPHY_REG0_THS_SETTLE_MASK);
+	/* THS_TERM: Programmed value = ceil(12.5 ns/DDRClk period) - 1. */
+	reg |= (DIV_ROUND_UP(25 * csi2_ddrclk_khz, 2000000) - 1)
+		<< ISPCSIPHY_REG0_THS_TERM_SHIFT;
+	/* THS_SETTLE: Programmed value = ceil(90 ns/DDRClk period) + 3. */
+	reg |= (DIV_ROUND_UP(90 * csi2_ddrclk_khz, 1000000) + 3)
+		<< ISPCSIPHY_REG0_THS_SETTLE_SHIFT;
+
+	isp_reg_writel(csi2->isp, reg, csi2->phy->phy_regs, ISPCSIPHY_REG0);
+
+	reg = isp_reg_readl(csi2->isp, csi2->phy->phy_regs, ISPCSIPHY_REG1);
+
+	reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK |
+		 ISPCSIPHY_REG1_TCLK_MISS_MASK |
+		 ISPCSIPHY_REG1_TCLK_SETTLE_MASK);
+	reg |= TCLK_TERM << ISPCSIPHY_REG1_TCLK_TERM_SHIFT;
+	reg |= TCLK_MISS << ISPCSIPHY_REG1_TCLK_MISS_SHIFT;
+	reg |= TCLK_SETTLE << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT;
+
+	isp_reg_writel(csi2->isp, reg, csi2->phy->phy_regs, ISPCSIPHY_REG1);
+
+	/* DPHY lane configuration */
+	reg = isp_reg_readl(csi2->isp, csi2->phy->cfg_regs, ISPCSI2_PHY_CFG);
+
+	for (i = 0; i < csi2->phy->num_data_lanes; i++) {
+		reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) |
+			 ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1));
+		reg |= (lanes->data[i].pol <<
+			ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1));
+		reg |= (lanes->data[i].pos <<
+			ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1));
+	}
+
+	reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK |
+		 ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK);
+	reg |= lanes->clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT;
+	reg |= lanes->clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT;
+
+	isp_reg_writel(csi2->isp, reg, csi2->phy->cfg_regs, ISPCSI2_PHY_CFG);
 
 	return 0;
 }
@@ -188,8 +215,9 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy)
 
 	omap3isp_csi2_reset(phy->csi2);
 
-	csiphy_dphy_config(phy);
-	csiphy_lanes_config(phy);
+	rval = omap3isp_csiphy_config(phy);
+	if (rval < 0)
+		goto done;
 
 	rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON);
 	if (rval) {
@@ -225,8 +253,6 @@ int omap3isp_csiphy_init(struct isp_device *isp)
 	struct isp_csiphy *phy1 = &isp->isp_csiphy1;
 	struct isp_csiphy *phy2 = &isp->isp_csiphy2;
 
-	isp->platform_cb.csiphy_config = csiphy_config;
-
 	phy2->isp = isp;
 	phy2->csi2 = &isp->isp_csi2a;
 	phy2->num_data_lanes = ISP_CSIPHY2_NUM_DATA_LANES;
diff --git a/drivers/media/video/omap3isp/ispcsiphy.h b/drivers/media/video/omap3isp/ispcsiphy.h
index e93a661..14551fd 100644
--- a/drivers/media/video/omap3isp/ispcsiphy.h
+++ b/drivers/media/video/omap3isp/ispcsiphy.h
@@ -32,14 +32,6 @@
 struct isp_csi2_device;
 struct regulator;
 
-struct isp_csiphy_dphy_cfg {
-	u8 ths_term;
-	u8 ths_settle;
-	u8 tclk_term;
-	unsigned tclk_miss:1;
-	u8 tclk_settle;
-};
-
 struct isp_csiphy {
 	struct isp_device *isp;
 	struct mutex mutex;	/* serialize csiphy configuration */
@@ -52,8 +44,6 @@ struct isp_csiphy {
 	unsigned int phy_regs;
 
 	u8 num_data_lanes;	/* number of CSI2 Data Lanes supported */
-	struct isp_csiphy_lanes_cfg lanes;
-	struct isp_csiphy_dphy_cfg dphy;
 };
 
 int omap3isp_csiphy_acquire(struct isp_csiphy *phy);
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* [PATCH v5 32/35] omap3isp: Add resizer data rate configuration to resizer_link_validate
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (30 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 31/35] omap3isp: Configure CSI-2 phy based on platform data Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-07 11:01   ` Laurent Pinchart
  2012-03-06 16:33 ` [PATCH v5 33/35] omap3isp: Find source pad from external entity Sakari Ailus
                   ` (2 subsequent siblings)
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

The configuration of many other blocks depend on resizer maximum data rate.
Get the value from resizer at link validation time.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/ispresizer.c |   15 ++++++++
 drivers/media/video/omap3isp/ispvideo.c   |   54 -----------------------------
 2 files changed, 15 insertions(+), 54 deletions(-)

diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c
index 0fc6525..dda49cb 100644
--- a/drivers/media/video/omap3isp/ispresizer.c
+++ b/drivers/media/video/omap3isp/ispresizer.c
@@ -1494,6 +1494,20 @@ static int resizer_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 	return 0;
 }
 
+static int resizer_link_validate(struct v4l2_subdev *sd,
+				 struct media_link *link,
+				 struct v4l2_subdev_format *source_fmt,
+				 struct v4l2_subdev_format *sink_fmt)
+{
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+	struct isp_pipeline *pipe = to_isp_pipeline(&sd->entity);
+
+	omap3isp_resizer_max_rate(res, &pipe->max_rate);
+
+	return v4l2_subdev_link_validate_default(sd, link,
+						 source_fmt, sink_fmt);
+}
+
 /*
  * resizer_init_formats - Initialize formats on all pads
  * @sd: ISP resizer V4L2 subdevice
@@ -1532,6 +1546,7 @@ static const struct v4l2_subdev_pad_ops resizer_v4l2_pad_ops = {
 	.set_fmt = resizer_set_format,
 	.get_crop = resizer_g_crop,
 	.set_crop = resizer_s_crop,
+	.link_validate = resizer_link_validate,
 };
 
 /* subdev operations */
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 51075b3..d9dd279 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -253,55 +253,6 @@ isp_video_far_end(struct isp_video *video)
 	return far_end;
 }
 
-/*
- * Validate a pipeline by checking both ends of all links for format
- * discrepancies.
- *
- * Compute the minimum time per frame value as the maximum of time per frame
- * limits reported by every block in the pipeline.
- *
- * Return 0 if all formats match, or -EPIPE if at least one link is found with
- * different formats on its two ends or if the pipeline doesn't start with a
- * video source (either a subdev with no input pad, or a non-subdev entity).
- */
-static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
-{
-	struct isp_device *isp = pipe->output->isp;
-	struct media_pad *pad;
-	struct v4l2_subdev *subdev;
-
-	subdev = isp_video_remote_subdev(pipe->output, NULL);
-	if (subdev == NULL)
-		return -EPIPE;
-
-	while (1) {
-		/* Retrieve the sink format */
-		pad = &subdev->entity.pads[0];
-		if (!(pad->flags & MEDIA_PAD_FL_SINK))
-			break;
-
-		/* Update the maximum frame rate */
-		if (subdev == &isp->isp_res.subdev)
-			omap3isp_resizer_max_rate(&isp->isp_res,
-						  &pipe->max_rate);
-
-		/* Retrieve the source format. Return an error if no source
-		 * entity can be found, and stop checking the pipeline if the
-		 * source entity isn't a subdev.
-		 */
-		pad = media_entity_remote_source(pad);
-		if (pad == NULL)
-			return -EPIPE;
-
-		if (media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
-			break;
-
-		subdev = media_entity_to_v4l2_subdev(pad->entity);
-	}
-
-	return 0;
-}
-
 static int
 __isp_video_get_format(struct isp_video *video, struct v4l2_format *format)
 {
@@ -1043,11 +994,6 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 		pipe->output = far_end;
 	}
 
-	/* Validate the pipeline and update its state. */
-	ret = isp_video_validate_pipeline(pipe);
-	if (ret < 0)
-		goto err_check_format;
-
 	pipe->error = false;
 
 	spin_lock_irqsave(&pipe->lock, flags);
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 32/35] omap3isp: Add resizer data rate configuration to resizer_link_validate
  2012-03-06 16:33 ` [PATCH v5 32/35] omap3isp: Add resizer data rate configuration to resizer_link_validate Sakari Ailus
@ 2012-03-07 11:01   ` Laurent Pinchart
  0 siblings, 0 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 11:01 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:33:13 Sakari Ailus wrote:
> The configuration of many other blocks depend on resizer maximum data rate.
> Get the value from resizer at link validation time.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 33/35] omap3isp: Find source pad from external entity
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (31 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 32/35] omap3isp: Add resizer data rate configuration to resizer_link_validate Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-07 11:04   ` Laurent Pinchart
  2012-03-06 16:33 ` [PATCH v5 34/35] smiapp: Generic SMIA++/SMIA PLL calculator Sakari Ailus
  2012-03-06 16:33 ` [PATCH v5 35/35] rm680: Add camera init Sakari Ailus
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

No longer assume pad number 0 is the source pad of the external entity. Find
the source pad from the external entity and use it instead.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
---
 drivers/media/video/omap3isp/isp.c |   13 ++++++++++++-
 1 files changed, 12 insertions(+), 1 deletions(-)

diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index f54953d..0718b0a 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -1744,6 +1744,7 @@ static int isp_register_entities(struct isp_device *isp)
 		struct media_entity *input;
 		unsigned int flags;
 		unsigned int pad;
+		unsigned int i;
 
 		sensor = isp_register_subdev_group(isp, subdevs->subdevs);
 		if (sensor == NULL)
@@ -1791,7 +1792,17 @@ static int isp_register_entities(struct isp_device *isp)
 			goto done;
 		}
 
-		ret = media_entity_create_link(&sensor->entity, 0, input, pad,
+		for (i = 0; i < sensor->entity.num_pads; i++)
+			if (sensor->entity.pads[i].flags & MEDIA_PAD_FL_SOURCE)
+				break;
+		if (i == sensor->entity.num_pads) {
+			dev_err(isp->dev,
+				"no source pads in external entities\n");
+			ret = -EINVAL;
+			goto done;
+		}
+
+		ret = media_entity_create_link(&sensor->entity, i, input, pad,
 					       flags);
 		if (ret < 0)
 			goto done;
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 33/35] omap3isp: Find source pad from external entity
  2012-03-06 16:33 ` [PATCH v5 33/35] omap3isp: Find source pad from external entity Sakari Ailus
@ 2012-03-07 11:04   ` Laurent Pinchart
  2012-03-07 18:08     ` Sakari Ailus
  0 siblings, 1 reply; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 11:04 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:33:14 Sakari Ailus wrote:
> No longer assume pad number 0 is the source pad of the external entity. Find
> the source pad from the external entity and use it instead.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

(with one comment below)

> ---
>  drivers/media/video/omap3isp/isp.c |   13 ++++++++++++-
>  1 files changed, 12 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/media/video/omap3isp/isp.c
> b/drivers/media/video/omap3isp/isp.c index f54953d..0718b0a 100644
> --- a/drivers/media/video/omap3isp/isp.c
> +++ b/drivers/media/video/omap3isp/isp.c
> @@ -1744,6 +1744,7 @@ static int isp_register_entities(struct isp_device
> *isp) struct media_entity *input;
>  		unsigned int flags;
>  		unsigned int pad;
> +		unsigned int i;
> 
>  		sensor = isp_register_subdev_group(isp, subdevs->subdevs);
>  		if (sensor == NULL)
> @@ -1791,7 +1792,17 @@ static int isp_register_entities(struct isp_device
> *isp) goto done;
>  		}
> 
> -		ret = media_entity_create_link(&sensor->entity, 0, input, pad,
> +		for (i = 0; i < sensor->entity.num_pads; i++)
> +			if (sensor->entity.pads[i].flags & MEDIA_PAD_FL_SOURCE)
> +				break;

While not strictly needed, I find the code easier to read with brackets for 
the for statement. It's up to you though.

> +		if (i == sensor->entity.num_pads) {
> +			dev_err(isp->dev,
> +				"no source pads in external entities\n");
> +			ret = -EINVAL;
> +			goto done;
> +		}
> +
> +		ret = media_entity_create_link(&sensor->entity, i, input, pad,
>  					       flags);
>  		if (ret < 0)
>  			goto done;
-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 33/35] omap3isp: Find source pad from external entity
  2012-03-07 11:04   ` Laurent Pinchart
@ 2012-03-07 18:08     ` Sakari Ailus
  0 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-07 18:08 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

Thanks for the review!!

On Wed, Mar 07, 2012 at 12:04:01PM +0100, Laurent Pinchart wrote:
> On Tuesday 06 March 2012 18:33:14 Sakari Ailus wrote:
> > No longer assume pad number 0 is the source pad of the external entity. Find
> > the source pad from the external entity and use it instead.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> 
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> (with one comment below)
> 
> > ---
> >  drivers/media/video/omap3isp/isp.c |   13 ++++++++++++-
> >  1 files changed, 12 insertions(+), 1 deletions(-)
> > 
> > diff --git a/drivers/media/video/omap3isp/isp.c
> > b/drivers/media/video/omap3isp/isp.c index f54953d..0718b0a 100644
> > --- a/drivers/media/video/omap3isp/isp.c
> > +++ b/drivers/media/video/omap3isp/isp.c
> > @@ -1744,6 +1744,7 @@ static int isp_register_entities(struct isp_device
> > *isp) struct media_entity *input;
> >  		unsigned int flags;
> >  		unsigned int pad;
> > +		unsigned int i;
> > 
> >  		sensor = isp_register_subdev_group(isp, subdevs->subdevs);
> >  		if (sensor == NULL)
> > @@ -1791,7 +1792,17 @@ static int isp_register_entities(struct isp_device
> > *isp) goto done;
> >  		}
> > 
> > -		ret = media_entity_create_link(&sensor->entity, 0, input, pad,
> > +		for (i = 0; i < sensor->entity.num_pads; i++)
> > +			if (sensor->entity.pads[i].flags & MEDIA_PAD_FL_SOURCE)
> > +				break;
> 
> While not strictly needed, I find the code easier to read with brackets for 
> the for statement. It's up to you though.

Brackets added.

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 34/35] smiapp: Generic SMIA++/SMIA PLL calculator
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (32 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 33/35] omap3isp: Find source pad from external entity Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  2012-03-07 12:26   ` Laurent Pinchart
  2012-03-06 16:33 ` [PATCH v5 35/35] rm680: Add camera init Sakari Ailus
  34 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

Calculate PLL configuration based on input data: sensor configuration, board
properties and sensor-specific limits.

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
---
 drivers/media/video/Kconfig                  |    5 +
 drivers/media/video/Makefile                 |    3 +
 drivers/media/video/smiapp-pll.c             |  421 ++++
 drivers/media/video/smiapp-pll.h             |  103 +
 drivers/media/video/smiapp/Kconfig           |   13 +
 drivers/media/video/smiapp/Makefile          |    3 +
 drivers/media/video/smiapp/smiapp-core.c     | 2830 ++++++++++++++++++++++++++
 drivers/media/video/smiapp/smiapp-debug.h    |   32 +
 drivers/media/video/smiapp/smiapp-limits.c   |  132 ++
 drivers/media/video/smiapp/smiapp-limits.h   |  128 ++
 drivers/media/video/smiapp/smiapp-quirk.c    |  264 +++
 drivers/media/video/smiapp/smiapp-quirk.h    |   72 +
 drivers/media/video/smiapp/smiapp-reg-defs.h |  503 +++++
 drivers/media/video/smiapp/smiapp-reg.h      |  122 ++
 drivers/media/video/smiapp/smiapp-regs.c     |  213 ++
 drivers/media/video/smiapp/smiapp-regs.h     |   46 +
 drivers/media/video/smiapp/smiapp.h          |  251 +++
 include/media/smiapp.h                       |   83 +
 18 files changed, 5224 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/smiapp-pll.c
 create mode 100644 drivers/media/video/smiapp-pll.h
 create mode 100644 drivers/media/video/smiapp/Kconfig
 create mode 100644 drivers/media/video/smiapp/Makefile
 create mode 100644 drivers/media/video/smiapp/smiapp-core.c
 create mode 100644 drivers/media/video/smiapp/smiapp-debug.h
 create mode 100644 drivers/media/video/smiapp/smiapp-limits.c
 create mode 100644 drivers/media/video/smiapp/smiapp-limits.h
 create mode 100644 drivers/media/video/smiapp/smiapp-quirk.c
 create mode 100644 drivers/media/video/smiapp/smiapp-quirk.h
 create mode 100644 drivers/media/video/smiapp/smiapp-reg-defs.h
 create mode 100644 drivers/media/video/smiapp/smiapp-reg.h
 create mode 100644 drivers/media/video/smiapp/smiapp-regs.c
 create mode 100644 drivers/media/video/smiapp/smiapp-regs.h
 create mode 100644 drivers/media/video/smiapp/smiapp.h
 create mode 100644 include/media/smiapp.h

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9495b6a..1aaeb04 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -459,6 +459,9 @@ config VIDEO_AK881X
 
 comment "Camera sensor devices"
 
+config VIDEO_SMIAPP_PLL
+	tristate
+
 config VIDEO_OV7670
 	tristate "OmniVision OV7670 sensor support"
 	depends on I2C && VIDEO_V4L2
@@ -524,6 +527,8 @@ config VIDEO_S5K6AA
 	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
 	  camera sensor with an embedded SoC image signal processor.
 
+source "drivers/media/video/smiapp/Kconfig"
+
 comment "Flash devices"
 
 config VIDEO_ADP1653
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 563443c..b74f15f 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -73,9 +73,12 @@ obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
 obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
+obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp/
 obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
 
+obj-$(CONFIG_VIDEO_SMIAPP_PLL)	+= smiapp-pll.o
+
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
 obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/video/smiapp-pll.c
new file mode 100644
index 0000000..3a999c0
--- /dev/null
+++ b/drivers/media/video/smiapp-pll.c
@@ -0,0 +1,421 @@
+/*
+ * drivers/media/video/smiapp-pll.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp/smiapp-debug.h"
+
+#include <linux/gcd.h>
+#include <linux/lcm.h>
+#include <linux/module.h>
+
+#include "smiapp-pll.h"
+
+/* Return an even number or one. */
+static inline uint32_t clk_div_even(uint32_t a)
+{
+	return max_t(uint32_t, 1, a & ~1);
+}
+
+/* Return an even number or one. */
+static inline uint32_t clk_div_even_up(uint32_t a)
+{
+	if (a == 1)
+		return 1;
+	return (a + 1) & ~1;
+}
+
+static inline int is_one_or_even(uint32_t a)
+{
+	if (a == 1)
+		return 1;
+	if (a & 1)
+		return 0;
+
+	return 1;
+}
+
+static int bounds_check(struct device *dev, uint32_t val,
+			uint32_t min, uint32_t max, char *str)
+{
+	if (val >= min && val <= max)
+		return 0;
+
+	dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max);
+
+	return -EINVAL;
+}
+
+static void print_pll(struct device *dev, struct smiapp_pll *pll)
+{
+	dev_dbg(dev, "pre_pll_clk_div\t%d\n",  pll->pre_pll_clk_div);
+	dev_dbg(dev, "pll_multiplier \t%d\n",  pll->pll_multiplier);
+	if (pll->flags != SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
+		dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div);
+		dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div);
+	}
+	dev_dbg(dev, "vt_sys_clk_div \t%d\n",  pll->vt_sys_clk_div);
+	dev_dbg(dev, "vt_pix_clk_div \t%d\n",  pll->vt_pix_clk_div);
+
+	dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz);
+	dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz);
+	dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz);
+	if (pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
+		dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n",
+			pll->op_sys_clk_freq_hz);
+		dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n",
+			pll->op_pix_clk_freq_hz);
+	}
+	dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz);
+	dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
+}
+
+int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
+			 struct smiapp_pll *pll)
+{
+	uint32_t sys_div;
+	uint32_t best_pix_div = INT_MAX >> 1;
+	uint32_t vt_op_binning_div;
+	uint32_t lane_op_clock_ratio;
+	uint32_t mul, div;
+	uint32_t more_mul_min, more_mul_max;
+	uint32_t more_mul_factor;
+	uint32_t min_vt_div, max_vt_div, vt_div;
+	uint32_t min_sys_div, max_sys_div;
+	uint32_t i;
+	int rval;
+
+	if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
+		lane_op_clock_ratio = pll->lanes;
+	else
+		lane_op_clock_ratio = 1;
+	dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
+
+	dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
+		pll->binning_vertical);
+
+	/* CSI transfers 2 bits per clock per lane; thus times 2 */
+	pll->pll_op_clk_freq_hz = pll->link_freq * 2
+		* (pll->lanes / lane_op_clock_ratio);
+
+	/* Figure out limits for pre-pll divider based on extclk */
+	dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+	limits->max_pre_pll_clk_div =
+		min_t(uint16_t, limits->max_pre_pll_clk_div,
+		      clk_div_even(pll->ext_clk_freq_hz /
+				   limits->min_pll_ip_freq_hz));
+	limits->min_pre_pll_clk_div =
+		max_t(uint16_t, limits->min_pre_pll_clk_div,
+		      clk_div_even(pll->ext_clk_freq_hz /
+				   limits->max_pll_ip_freq_hz));
+	dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+
+	i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
+	mul = div_u64(pll->pll_op_clk_freq_hz, i);
+	div = pll->ext_clk_freq_hz / i;
+	dev_dbg(dev, "mul %d / div %d\n", mul, div);
+
+	limits->min_pre_pll_clk_div =
+		max_t(uint16_t, limits->min_pre_pll_clk_div,
+		      clk_div_even_up(
+			      DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
+					   limits->max_pll_op_freq_hz)));
+	dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+
+	if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) {
+		dev_err(dev, "unable to compute pre_pll divisor\n");
+		return -EINVAL;
+	}
+
+	pll->pre_pll_clk_div = limits->min_pre_pll_clk_div;
+
+	/*
+	 * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
+	 * too high.
+	 */
+	dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div);
+
+	/* Don't go above max pll multiplier. */
+	more_mul_max = limits->max_pll_multiplier / mul;
+	dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n",
+		more_mul_max);
+	/* Don't go above max pll op frequency. */
+	more_mul_max =
+		min_t(int,
+		      more_mul_max,
+		      limits->max_pll_op_freq_hz
+		      / (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul));
+	dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n",
+		more_mul_max);
+	/* Don't go above the division capability of op sys clock divider. */
+	more_mul_max = min(more_mul_max,
+			   limits->max_op_sys_clk_div * pll->pre_pll_clk_div
+			   / div);
+	dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n",
+		more_mul_max);
+	/* Ensure we won't go above min_pll_multiplier. */
+	more_mul_max = min(more_mul_max,
+			   DIV_ROUND_UP(limits->max_pll_multiplier, mul));
+	dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n",
+		more_mul_max);
+
+	/* Ensure we won't go below min_pll_op_freq_hz. */
+	more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz,
+				    pll->ext_clk_freq_hz / pll->pre_pll_clk_div
+				    * mul);
+	dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n",
+		more_mul_min);
+	/* Ensure we won't go below min_pll_multiplier. */
+	more_mul_min = max(more_mul_min,
+			   DIV_ROUND_UP(limits->min_pll_multiplier, mul));
+	dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n",
+		more_mul_min);
+
+	if (more_mul_min > more_mul_max) {
+		dev_warn(dev,
+			 "unable to compute more_mul_min and more_mul_max");
+		return -EINVAL;
+	}
+
+	more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div;
+	dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor);
+	more_mul_factor = lcm(more_mul_factor, limits->min_op_sys_clk_div);
+	dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
+		more_mul_factor);
+	i = ALIGN(more_mul_min, more_mul_factor);
+	if (!is_one_or_even(i))
+		i <<= 1;
+
+	dev_dbg(dev, "final more_mul: %d\n", i);
+	if (i > more_mul_max) {
+		dev_warn(dev, "final more_mul is bad, max %d", more_mul_max);
+		return -EINVAL;
+	}
+
+	pll->pll_multiplier = mul * i;
+	pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div;
+	dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div);
+
+	pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz
+		/ pll->pre_pll_clk_div;
+
+	pll->pll_op_clk_freq_hz = pll->pll_ip_clk_freq_hz
+		* pll->pll_multiplier;
+
+	/* Derive pll_op_clk_freq_hz. */
+	pll->op_sys_clk_freq_hz =
+		pll->pll_op_clk_freq_hz / pll->op_sys_clk_div;
+
+	pll->op_pix_clk_div = pll->bits_per_pixel;
+	dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div);
+
+	pll->op_pix_clk_freq_hz =
+		pll->op_sys_clk_freq_hz / pll->op_pix_clk_div;
+
+	/*
+	 * Some sensors perform analogue binning and some do this
+	 * digitally. The ones doing this digitally can be roughly be
+	 * found out using this formula. The ones doing this digitally
+	 * should run at higher clock rate, so smaller divisor is used
+	 * on video timing side.
+	 */
+	if (limits->min_line_length_pck_bin > limits->min_line_length_pck
+	    / pll->binning_horizontal)
+		vt_op_binning_div = pll->binning_horizontal;
+	else
+		vt_op_binning_div = 1;
+	dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div);
+
+	/*
+	 * Profile 2 supports vt_pix_clk_div E [4, 10]
+	 *
+	 * Horizontal binning can be used as a base for difference in
+	 * divisors. One must make sure that horizontal blanking is
+	 * enough to accommodate the CSI-2 sync codes.
+	 *
+	 * Take scaling factor into account as well.
+	 *
+	 * Find absolute limits for the factor of vt divider.
+	 */
+	dev_dbg(dev, "scale_m: %d\n", pll->scale_m);
+	min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
+				  * pll->scale_n,
+				  lane_op_clock_ratio * vt_op_binning_div
+				  * pll->scale_m);
+
+	/* Find smallest and biggest allowed vt divisor. */
+	dev_dbg(dev, "min_vt_div: %d\n", min_vt_div);
+	min_vt_div = max(min_vt_div,
+			 DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				      limits->max_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n",
+		min_vt_div);
+	min_vt_div = max_t(uint32_t, min_vt_div,
+			   limits->min_vt_pix_clk_div
+			   * limits->min_vt_sys_clk_div);
+	dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div);
+
+	max_vt_div = limits->max_vt_sys_clk_div * limits->max_vt_pix_clk_div;
+	dev_dbg(dev, "max_vt_div: %d\n", max_vt_div);
+	max_vt_div = min(max_vt_div,
+			 DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				      limits->min_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n",
+		max_vt_div);
+
+	/*
+	 * Find limitsits for sys_clk_div. Not all values are possible
+	 * with all values of pix_clk_div.
+	 */
+	min_sys_div = limits->min_vt_sys_clk_div;
+	dev_dbg(dev, "min_sys_div: %d\n", min_sys_div);
+	min_sys_div = max(min_sys_div,
+			  DIV_ROUND_UP(min_vt_div,
+				       limits->max_vt_pix_clk_div));
+	dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div);
+	min_sys_div = max(min_sys_div,
+			  pll->pll_op_clk_freq_hz
+			  / limits->max_vt_sys_clk_freq_hz);
+	dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div);
+	min_sys_div = clk_div_even_up(min_sys_div);
+	dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div);
+
+	max_sys_div = limits->max_vt_sys_clk_div;
+	dev_dbg(dev, "max_sys_div: %d\n", max_sys_div);
+	max_sys_div = min(max_sys_div,
+			  DIV_ROUND_UP(max_vt_div,
+				       limits->min_vt_pix_clk_div));
+	dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div);
+	max_sys_div = min(max_sys_div,
+			  DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				       limits->min_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div);
+
+	/*
+	 * Find pix_div such that a legal pix_div * sys_div results
+	 * into a value which is not smaller than div, the desired
+	 * divisor.
+	 */
+	for (vt_div = min_vt_div; vt_div <= max_vt_div;
+	     vt_div += 2 - (vt_div & 1)) {
+		for (sys_div = min_sys_div;
+		     sys_div <= max_sys_div;
+		     sys_div += 2 - (sys_div & 1)) {
+			int pix_div = DIV_ROUND_UP(vt_div, sys_div);
+
+			if (pix_div <
+			    limits->min_vt_pix_clk_div
+			    || pix_div
+			    > limits->max_vt_pix_clk_div) {
+				dev_dbg(dev,
+					"pix_div %d too small or too big (%d--%d)\n",
+					pix_div,
+					limits->min_vt_pix_clk_div,
+					limits->max_vt_pix_clk_div);
+				continue;
+			}
+
+			/* Check if this one is better. */
+			if (pix_div * sys_div
+			    <= ALIGN(min_vt_div, best_pix_div))
+				best_pix_div = pix_div;
+		}
+		if (best_pix_div < INT_MAX >> 1)
+			break;
+	}
+
+	pll->vt_sys_clk_div = DIV_ROUND_UP(min_vt_div, best_pix_div);
+	pll->vt_pix_clk_div = best_pix_div;
+
+	pll->vt_sys_clk_freq_hz =
+		pll->pll_op_clk_freq_hz / pll->vt_sys_clk_div;
+	pll->vt_pix_clk_freq_hz =
+		pll->vt_sys_clk_freq_hz / pll->vt_pix_clk_div;
+
+	pll->pixel_rate_csi =
+		pll->op_pix_clk_freq_hz * lane_op_clock_ratio;
+
+	print_pll(dev, pll);
+
+	rval = bounds_check(dev, pll->pre_pll_clk_div,
+			    limits->min_pre_pll_clk_div,
+			    limits->max_pre_pll_clk_div, "pre_pll_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_ip_clk_freq_hz,
+			limits->min_pll_ip_freq_hz, limits->max_pll_ip_freq_hz,
+			"pll_ip_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_multiplier,
+			limits->min_pll_multiplier, limits->max_pll_multiplier,
+			"pll_multiplier");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_op_clk_freq_hz,
+			limits->min_pll_op_freq_hz, limits->max_pll_op_freq_hz,
+			"pll_op_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_sys_clk_div,
+			limits->min_op_sys_clk_div, limits->max_op_sys_clk_div,
+			"op_sys_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_pix_clk_div,
+			limits->min_op_pix_clk_div, limits->max_op_pix_clk_div,
+			"op_pix_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_sys_clk_freq_hz,
+			limits->min_op_sys_clk_freq_hz,
+			limits->max_op_sys_clk_freq_hz,
+			"op_sys_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_pix_clk_freq_hz,
+			limits->min_op_pix_clk_freq_hz,
+			limits->max_op_pix_clk_freq_hz,
+			"op_pix_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->vt_sys_clk_freq_hz,
+			limits->min_vt_sys_clk_freq_hz,
+			limits->max_vt_sys_clk_freq_hz,
+			"vt_sys_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->vt_pix_clk_freq_hz,
+			limits->min_vt_pix_clk_freq_hz,
+			limits->max_vt_pix_clk_freq_hz,
+			"vt_pix_clk_freq_hz");
+
+	return rval;
+}
+EXPORT_SYMBOL_GPL(smiapp_pll_calculate);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
+MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp-pll.h b/drivers/media/video/smiapp-pll.h
new file mode 100644
index 0000000..9eab63f
--- /dev/null
+++ b/drivers/media/video/smiapp-pll.h
@@ -0,0 +1,103 @@
+/*
+ * drivers/media/video/smiapp-pll.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_PLL_H
+#define SMIAPP_PLL_H
+
+#include <linux/device.h>
+
+struct smiapp_pll {
+	uint8_t lanes;
+	uint8_t binning_horizontal;
+	uint8_t binning_vertical;
+	uint8_t scale_m;
+	uint8_t scale_n;
+	uint8_t bits_per_pixel;
+	uint16_t flags;
+	uint32_t link_freq;
+
+	uint16_t pre_pll_clk_div;
+	uint16_t pll_multiplier;
+	uint16_t op_sys_clk_div;
+	uint16_t op_pix_clk_div;
+	uint16_t vt_sys_clk_div;
+	uint16_t vt_pix_clk_div;
+
+	uint32_t ext_clk_freq_hz;
+	uint32_t pll_ip_clk_freq_hz;
+	uint32_t pll_op_clk_freq_hz;
+	uint32_t op_sys_clk_freq_hz;
+	uint32_t op_pix_clk_freq_hz;
+	uint32_t vt_sys_clk_freq_hz;
+	uint32_t vt_pix_clk_freq_hz;
+
+	uint32_t pixel_rate_csi;
+};
+
+struct smiapp_pll_limits {
+	/* Strict PLL limits */
+	uint32_t min_ext_clk_freq_hz;
+	uint32_t max_ext_clk_freq_hz;
+	uint16_t min_pre_pll_clk_div;
+	uint16_t max_pre_pll_clk_div;
+	uint32_t min_pll_ip_freq_hz;
+	uint32_t max_pll_ip_freq_hz;
+	uint16_t min_pll_multiplier;
+	uint16_t max_pll_multiplier;
+	uint32_t min_pll_op_freq_hz;
+	uint32_t max_pll_op_freq_hz;
+
+	uint16_t min_vt_sys_clk_div;
+	uint16_t max_vt_sys_clk_div;
+	uint32_t min_vt_sys_clk_freq_hz;
+	uint32_t max_vt_sys_clk_freq_hz;
+	uint16_t min_vt_pix_clk_div;
+	uint16_t max_vt_pix_clk_div;
+	uint32_t min_vt_pix_clk_freq_hz;
+	uint32_t max_vt_pix_clk_freq_hz;
+
+	uint16_t min_op_sys_clk_div;
+	uint16_t max_op_sys_clk_div;
+	uint32_t min_op_sys_clk_freq_hz;
+	uint32_t max_op_sys_clk_freq_hz;
+	uint16_t min_op_pix_clk_div;
+	uint16_t max_op_pix_clk_div;
+	uint32_t min_op_pix_clk_freq_hz;
+	uint32_t max_op_pix_clk_freq_hz;
+
+	/* Other relevant limits */
+	uint32_t min_line_length_pck_bin;
+	uint32_t min_line_length_pck;
+};
+
+/* op pix clock is for all lanes in total normally */
+#define SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
+#define SMIAPP_PLL_FLAG_NO_OP_CLOCKS				(1 << 1)
+
+struct device;
+
+int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
+			 struct smiapp_pll *pll);
+
+#endif /* SMIAPP_PLL_H */
diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig
new file mode 100644
index 0000000..9504c43
--- /dev/null
+++ b/drivers/media/video/smiapp/Kconfig
@@ -0,0 +1,13 @@
+config VIDEO_SMIAPP
+	tristate "SMIA++/SMIA sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	select VIDEO_SMIAPP_PLL
+	---help---
+	  This is a generic driver for SMIA++/SMIA camera modules.
+
+config VIDEO_SMIAPP_DEBUG
+	bool "Enable debugging for the generic SMIA++/SMIA driver"
+	depends on VIDEO_SMIAPP
+	---help---
+	  Enable debugging output in the generic SMIA++/SMIA driver. If you
+	  are developing the driver you might want to enable this.
diff --git a/drivers/media/video/smiapp/Makefile b/drivers/media/video/smiapp/Makefile
new file mode 100644
index 0000000..5a207ee
--- /dev/null
+++ b/drivers/media/video/smiapp/Makefile
@@ -0,0 +1,3 @@
+smiapp-objs			+= smiapp-core.o smiapp-regs.o \
+				   smiapp-quirk.o smiapp-limits.o
+obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp.o
diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c
new file mode 100644
index 0000000..879fb1e
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-core.c
@@ -0,0 +1,2830 @@
+/*
+ * drivers/media/video/smiapp/smiapp-core.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Based on smiapp driver by Vimarsh Zutshi
+ * Based on jt8ev1.c by Vimarsh Zutshi
+ * Based on smia-sensor.c by Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/v4l2-mediabus.h>
+#include <media/v4l2-device.h>
+
+#include "smiapp.h"
+
+#define SMIAPP_ALIGN_DIM(dim, flags)		\
+	((flags) & V4L2_SUBDEV_SEL_FLAG_SIZE_GE	\
+	 ? ALIGN((dim), 2)			\
+	 : (dim) & ~1)
+
+/*
+ * smiapp_module_idents - supported camera modules
+ */
+static const struct smiapp_module_ident smiapp_module_idents[] = {
+	SMIAPP_IDENT_L(0x01, 0x022b, -1, "vs6555"),
+	SMIAPP_IDENT_L(0x01, 0x022e, -1, "vw6558"),
+	SMIAPP_IDENT_L(0x07, 0x7698, -1, "ovm7698"),
+	SMIAPP_IDENT_L(0x0b, 0x4242, -1, "smiapp-003"),
+	SMIAPP_IDENT_L(0x0c, 0x208a, -1, "tcm8330md"),
+	SMIAPP_IDENT_LQ(0x0c, 0x2134, -1, "tcm8500md", &smiapp_tcm8500md_quirk),
+	SMIAPP_IDENT_L(0x0c, 0x213e, -1, "et8en2"),
+	SMIAPP_IDENT_L(0x0c, 0x2184, -1, "tcm8580md"),
+	SMIAPP_IDENT_LQ(0x0c, 0x560f, -1, "jt8ew9", &smiapp_jt8ew9_quirk),
+	SMIAPP_IDENT_LQ(0x10, 0x4141, -1, "jt8ev1", &smiapp_jt8ev1_quirk),
+	SMIAPP_IDENT_LQ(0x10, 0x4241, -1, "imx125es", &smiapp_imx125es_quirk),
+};
+
+/*
+ *
+ * Dynamic Capability Identification
+ *
+ */
+
+static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc;
+	int i;
+	int rval;
+	int line_count = 0;
+	int embedded_start = -1, embedded_end = -1;
+	int image_start = 0;
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE,
+			   &fmt_model_type);
+	if (rval)
+		return rval;
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE,
+			   &fmt_model_subtype);
+	if (rval)
+		return rval;
+
+	ncol_desc = (fmt_model_subtype
+		     & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK)
+		>> SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT;
+	nrow_desc = fmt_model_subtype
+		& SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK;
+
+	dev_dbg(&client->dev, "format_model_type %s\n",
+		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE
+		? "2 byte" :
+		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE
+		? "4 byte" : "is simply bad");
+
+	for (i = 0; i < ncol_desc + nrow_desc; i++) {
+		u32 desc;
+		u32 pixelcode;
+		u32 pixels;
+		char *which;
+		char *what;
+
+		if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i),
+				&desc);
+			if (rval)
+				return rval;
+
+			pixelcode =
+				(desc
+				 & SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK)
+				>> SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT;
+			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK;
+		} else if (fmt_model_type
+			   == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i),
+				&desc);
+			if (rval)
+				return rval;
+
+			pixelcode =
+				(desc
+				 & SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK)
+				>> SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT;
+			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK;
+		} else {
+			dev_dbg(&client->dev,
+				"invalid frame format model type %d\n",
+				fmt_model_type);
+			return -EINVAL;
+		}
+
+		if (i < ncol_desc)
+			which = "columns";
+		else
+			which = "rows";
+
+		switch (pixelcode) {
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED:
+			what = "embedded";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY:
+			what = "dummy";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK:
+			what = "black";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK:
+			what = "dark";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE:
+			what = "visible";
+			break;
+		default:
+			what = "invalid";
+			dev_dbg(&client->dev, "pixelcode %d\n", pixelcode);
+			break;
+		}
+
+		dev_dbg(&client->dev, "%s pixels: %d %s\n",
+			what, pixels, which);
+
+		if (i < ncol_desc)
+			continue;
+
+		/* Handle row descriptors */
+		if (pixelcode
+		    == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED) {
+			embedded_start = line_count;
+		} else {
+			if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE
+			    || pixels >= sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES] / 2)
+				image_start = line_count;
+			if (embedded_start != -1 && embedded_end == -1)
+				embedded_end = line_count;
+		}
+		line_count += pixels;
+	}
+
+	if (embedded_start == -1 || embedded_end == -1) {
+		embedded_start = 0;
+		embedded_end = 0;
+	}
+
+	dev_dbg(&client->dev, "embedded data from lines %d to %d\n",
+		embedded_start, embedded_end);
+	dev_dbg(&client->dev, "image data starts at line %d\n", image_start);
+
+	return 0;
+}
+
+static int smiapp_pll_configure(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_pll *pll = &sensor->pll;
+	int rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_VT_PIX_CLK_DIV, pll->vt_pix_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_VT_SYS_CLK_DIV, pll->vt_sys_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_PRE_PLL_CLK_DIV, pll->pre_pll_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_PLL_MULTIPLIER, pll->pll_multiplier);
+	if (rval < 0)
+		return rval;
+
+	/* Lane op clock ratio does not apply here. */
+	rval = smiapp_write(
+		client, SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS,
+		DIV_ROUND_UP(pll->op_sys_clk_freq_hz, 1000000 / 256 / 256));
+	if (rval < 0 || sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_OP_PIX_CLK_DIV, pll->op_pix_clk_div);
+	if (rval < 0)
+		return rval;
+
+	return smiapp_write(
+		client, SMIAPP_REG_U16_OP_SYS_CLK_DIV, pll->op_sys_clk_div);
+}
+
+static int smiapp_pll_update(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_pll_limits lim = {
+		.min_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV],
+		.max_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV],
+		.min_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ],
+		.max_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ],
+		.min_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MIN_PLL_MULTIPLIER],
+		.max_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MAX_PLL_MULTIPLIER],
+		.min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ],
+		.max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ],
+
+		.min_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV],
+		.max_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV],
+		.min_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV],
+		.max_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV],
+		.min_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ],
+		.max_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ],
+		.min_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ],
+		.max_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ],
+
+		.min_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV],
+		.max_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV],
+		.min_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV],
+		.max_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV],
+		.min_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ],
+		.max_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ],
+		.min_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ],
+		.max_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ],
+
+		.min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN],
+		.min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK],
+	};
+	struct smiapp_pll *pll = &sensor->pll;
+	int rval;
+
+	memset(&sensor->pll, 0, sizeof(sensor->pll));
+
+	pll->lanes = sensor->platform_data->lanes;
+	pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
+
+	if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) {
+		/*
+		 * Fill in operational clock divisors limits from the
+		 * video timing ones. On profile 0 sensors the
+		 * requirements regarding them are essentially the
+		 * same as on VT ones.
+		 */
+		lim.min_op_sys_clk_div = lim.min_vt_sys_clk_div;
+		lim.max_op_sys_clk_div = lim.max_vt_sys_clk_div;
+		lim.min_op_pix_clk_div = lim.min_vt_pix_clk_div;
+		lim.max_op_pix_clk_div = lim.max_vt_pix_clk_div;
+		lim.min_op_sys_clk_freq_hz = lim.min_vt_sys_clk_freq_hz;
+		lim.max_op_sys_clk_freq_hz = lim.max_vt_sys_clk_freq_hz;
+		lim.min_op_pix_clk_freq_hz = lim.min_vt_pix_clk_freq_hz;
+		lim.max_op_pix_clk_freq_hz = lim.max_vt_pix_clk_freq_hz;
+		/* Profile 0 sensors have no separate OP clock branch. */
+		pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
+	}
+
+	if (smiapp_needs_quirk(sensor,
+			       SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE))
+		pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
+
+	pll->binning_horizontal = sensor->binning_horizontal;
+	pll->binning_vertical = sensor->binning_vertical;
+	pll->link_freq =
+		sensor->link_freq->qmenu_int[sensor->link_freq->val];
+	pll->scale_m = sensor->scale_m;
+	pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+	pll->bits_per_pixel = sensor->csi_format->compressed;
+
+	rval = smiapp_pll_calculate(&client->dev, &lim, pll);
+	if (rval < 0)
+		return rval;
+
+	sensor->pixel_rate_parray->cur.val64 = pll->vt_pix_clk_freq_hz;
+	sensor->pixel_rate_csi->cur.val64 = pll->pixel_rate_csi;
+
+	return 0;
+}
+
+
+/*
+ *
+ * V4L2 Controls handling
+ *
+ */
+
+static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor)
+{
+	struct v4l2_ctrl *ctrl = sensor->exposure;
+	int max;
+
+	max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+		+ sensor->vblank->val
+		- sensor->limits[SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN];
+
+	ctrl->maximum = max;
+	if (ctrl->default_value > max)
+		ctrl->default_value = max;
+	if (ctrl->val > max)
+		ctrl->val = max;
+	if (ctrl->cur.val > max)
+		ctrl->cur.val = max;
+}
+
+/*
+ * Order matters.
+ *
+ * 1. Bits-per-pixel, descending.
+ * 2. Bits-per-pixel compressed, descending.
+ * 3. Pixel order, same as in pixel_order_str. Formats for all four pixel
+ *    orders must be defined.
+ */
+static const struct smiapp_csi_data_format smiapp_csi_data_formats[] = {
+	{ V4L2_MBUS_FMT_SGRBG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GBRG, },
+	{ V4L2_MBUS_FMT_SGRBG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GBRG, },
+	{ V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GBRG, },
+};
+
+const char *pixel_order_str[] = { "GRBG", "RGGB", "BGGR", "GBRG" };
+
+#define to_csi_format_idx(fmt) (((unsigned long)(fmt)			\
+				 - (unsigned long)smiapp_csi_data_formats) \
+				/ sizeof(*smiapp_csi_data_formats))
+
+static u32 smiapp_pixel_order(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int flip = 0;
+
+	if (sensor->hflip) {
+		if (sensor->hflip->val)
+			flip |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
+
+		if (sensor->vflip->val)
+			flip |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
+	}
+
+	flip ^= sensor->hvflip_inv_mask;
+
+	dev_dbg(&client->dev, "flip %d\n", flip);
+	return sensor->default_pixel_order ^ flip;
+}
+
+static void smiapp_update_mbus_formats(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int csi_format_idx = to_csi_format_idx(sensor->csi_format) & ~3;
+	int internal_csi_format_idx =
+		to_csi_format_idx(sensor->internal_csi_format) & ~3;
+	int pixel_order = smiapp_pixel_order(sensor);
+
+	sensor->mbus_frame_fmts =
+		sensor->default_mbus_frame_fmts << pixel_order;
+	sensor->csi_format =
+		&smiapp_csi_data_formats[csi_format_idx + pixel_order];
+	sensor->internal_csi_format =
+		&smiapp_csi_data_formats[internal_csi_format_idx
+					 + pixel_order];
+
+	BUG_ON(max(internal_csi_format_idx, csi_format_idx) + pixel_order
+	       >= ARRAY_SIZE(smiapp_csi_data_formats));
+	BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0);
+
+	dev_dbg(&client->dev, "new pixel order %s\n",
+		pixel_order_str[pixel_order]);
+}
+
+static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct smiapp_sensor *sensor =
+		container_of(ctrl->handler, struct smiapp_subdev, ctrl_handler)
+			->sensor;
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 orient = 0;
+	int exposure;
+	int rval;
+
+	switch (ctrl->id) {
+	case V4L2_CID_ANALOGUE_GAIN:
+		return smiapp_write(
+			client,
+			SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL, ctrl->val);
+
+	case V4L2_CID_EXPOSURE:
+		return smiapp_write(
+			client,
+			SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val);
+
+	case V4L2_CID_HFLIP:
+	case V4L2_CID_VFLIP:
+		if (sensor->streaming)
+			return -EBUSY;
+
+		if (sensor->hflip->val)
+			orient |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
+
+		if (sensor->vflip->val)
+			orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
+
+		orient ^= sensor->hvflip_inv_mask;
+		rval = smiapp_write(client,
+				    SMIAPP_REG_U8_IMAGE_ORIENTATION,
+				    orient);
+		if (rval < 0)
+			return rval;
+
+		smiapp_update_mbus_formats(sensor);
+
+		return 0;
+
+	case V4L2_CID_VBLANK:
+		exposure = sensor->exposure->val;
+
+		__smiapp_update_exposure_limits(sensor);
+
+		if (exposure > sensor->exposure->maximum) {
+			sensor->exposure->val =
+				sensor->exposure->maximum;
+			rval = smiapp_set_ctrl(
+				sensor->exposure);
+			if (rval < 0)
+				return rval;
+		}
+
+		return smiapp_write(
+			client, SMIAPP_REG_U16_FRAME_LENGTH_LINES,
+			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+			+ ctrl->val);
+
+	case V4L2_CID_HBLANK:
+		return smiapp_write(
+			client, SMIAPP_REG_U16_LINE_LENGTH_PCK,
+			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
+			+ ctrl->val);
+
+	case V4L2_CID_LINK_FREQ:
+		if (sensor->streaming)
+			return -EBUSY;
+
+		return smiapp_pll_update(sensor);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct v4l2_ctrl_ops smiapp_ctrl_ops = {
+	.s_ctrl = smiapp_set_ctrl,
+};
+
+static int smiapp_init_controls(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct v4l2_ctrl_config cfg;
+	int rval;
+
+	rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 7);
+	if (rval)
+		return rval;
+	sensor->pixel_array->ctrl_handler.lock = &sensor->mutex;
+
+	sensor->analog_gain = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_ANALOGUE_GAIN,
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN],
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX],
+		max(sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP], 1U),
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN]);
+
+	/* Exposure limits will be updated soon, use just something here. */
+	sensor->exposure = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_EXPOSURE, 0, 0, 1, 0);
+
+	sensor->hflip = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_HFLIP, 0, 1, 1, 0);
+	sensor->vflip = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_VFLIP, 0, 1, 1, 0);
+
+	sensor->vblank = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_VBLANK, 0, 1, 1, 0);
+
+	if (sensor->vblank)
+		sensor->vblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
+	sensor->hblank = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_HBLANK, 0, 1, 1, 0);
+
+	if (sensor->hblank)
+		sensor->hblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
+	sensor->pixel_rate_parray = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
+
+	if (sensor->pixel_array->ctrl_handler.error) {
+		dev_err(&client->dev,
+			"pixel array controls initialization failed (%d)\n",
+			sensor->pixel_array->ctrl_handler.error);
+		rval = sensor->pixel_array->ctrl_handler.error;
+		goto error;
+	}
+
+	sensor->pixel_array->sd.ctrl_handler =
+		&sensor->pixel_array->ctrl_handler;
+
+	v4l2_ctrl_cluster(2, &sensor->hflip);
+
+	rval = v4l2_ctrl_handler_init(&sensor->src->ctrl_handler, 0);
+	if (rval)
+		goto error;
+	sensor->src->ctrl_handler.lock = &sensor->mutex;
+
+	memset(&cfg, 0, sizeof(cfg));
+
+	cfg.ops = &smiapp_ctrl_ops;
+	cfg.id = V4L2_CID_LINK_FREQ;
+	cfg.type = V4L2_CTRL_TYPE_INTEGER_MENU;
+	while (sensor->platform_data->op_sys_clock[cfg.max + 1])
+		cfg.max++;
+	cfg.qmenu_int = sensor->platform_data->op_sys_clock;
+
+	sensor->link_freq = v4l2_ctrl_new_custom(
+		&sensor->src->ctrl_handler, &cfg, NULL);
+
+	sensor->pixel_rate_csi = v4l2_ctrl_new_std(
+		&sensor->src->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
+
+	if (sensor->src->ctrl_handler.error) {
+		dev_err(&client->dev,
+			"src controls initialization failed (%d)\n",
+			sensor->src->ctrl_handler.error);
+		rval = sensor->src->ctrl_handler.error;
+		goto error;
+	}
+
+	sensor->src->sd.ctrl_handler =
+		&sensor->src->ctrl_handler;
+
+	return 0;
+
+error:
+	v4l2_ctrl_handler_free(&sensor->pixel_array->ctrl_handler);
+	v4l2_ctrl_handler_free(&sensor->src->ctrl_handler);
+
+	return rval;
+}
+
+static void smiapp_free_controls(struct smiapp_sensor *sensor)
+{
+	unsigned int i;
+
+	for (i = 0; i < sensor->ssds_used; i++)
+		v4l2_ctrl_handler_free(&sensor->ssds[i].ctrl_handler);
+}
+
+static int smiapp_get_limits(struct smiapp_sensor *sensor, int const *limit,
+			     unsigned int n)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int i;
+	u32 val;
+	int rval;
+
+	for (i = 0; i < n; i++) {
+		rval = smiapp_read(
+			client, smiapp_reg_limits[limit[i]].addr, &val);
+		if (rval)
+			return rval;
+		sensor->limits[limit[i]] = val;
+		dev_dbg(&client->dev, "0x%8.8x \"%s\" = %d, 0x%x\n",
+			smiapp_reg_limits[limit[i]].addr,
+			smiapp_reg_limits[limit[i]].what, val, val);
+	}
+
+	return 0;
+}
+
+static int smiapp_get_all_limits(struct smiapp_sensor *sensor)
+{
+	unsigned int i;
+	int rval;
+
+	for (i = 0; i < SMIAPP_LIMIT_LAST; i++) {
+		rval = smiapp_get_limits(sensor, &i, 1);
+		if (rval < 0)
+			return rval;
+	}
+
+	if (sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] == 0)
+		smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16);
+
+	return 0;
+}
+
+static int smiapp_get_limits_binning(struct smiapp_sensor *sensor)
+{
+	static u32 const limits[] = {
+		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN,
+		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN,
+		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN,
+		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN,
+		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN,
+	};
+	static u32 const limits_replace[] = {
+		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES,
+		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES,
+		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK,
+		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK,
+		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN,
+	};
+
+	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY] ==
+	    SMIAPP_BINNING_CAPABILITY_NO) {
+		unsigned int i;
+
+		for (i = 0; i < ARRAY_SIZE(limits); i++)
+			sensor->limits[limits[i]] =
+				sensor->limits[limits_replace[i]];
+
+		return 0;
+	}
+
+	return smiapp_get_limits(sensor, limits, ARRAY_SIZE(limits));
+}
+
+static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int type, n;
+	unsigned int i, pixel_order;
+	int rval;
+
+	rval = smiapp_read(
+		client, SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE, &type);
+	if (rval)
+		return rval;
+
+	dev_dbg(&client->dev, "data_format_model_type %d\n", type);
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_PIXEL_ORDER,
+			   &pixel_order);
+	if (rval)
+		return rval;
+
+	if (pixel_order >= ARRAY_SIZE(pixel_order_str)) {
+		dev_dbg(&client->dev, "bad pixel order %d\n", pixel_order);
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->dev, "pixel order %d (%s)\n", pixel_order,
+		pixel_order_str[pixel_order]);
+
+	switch (type) {
+	case SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL:
+		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N;
+		break;
+	case SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED:
+		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sensor->default_pixel_order = pixel_order;
+	sensor->mbus_frame_fmts = 0;
+
+	for (i = 0; i < n; i++) {
+		unsigned int fmt, j;
+
+		rval = smiapp_read(
+			client,
+			SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(i), &fmt);
+		if (rval)
+			return rval;
+
+		dev_dbg(&client->dev, "bpp %d, compressed %d\n",
+			fmt >> 8, (u8)fmt);
+
+		for (j = 0; j < ARRAY_SIZE(smiapp_csi_data_formats); j++) {
+			const struct smiapp_csi_data_format *f =
+				&smiapp_csi_data_formats[j];
+
+			if (f->pixel_order != SMIAPP_PIXEL_ORDER_GRBG)
+				continue;
+
+			if (f->width != fmt >> 8 || f->compressed != (u8)fmt)
+				continue;
+
+			dev_dbg(&client->dev, "jolly good! %d\n", j);
+
+			sensor->default_mbus_frame_fmts |= 1 << j;
+			if (!sensor->csi_format) {
+				sensor->csi_format = f;
+				sensor->internal_csi_format = f;
+			}
+		}
+	}
+
+	if (!sensor->csi_format) {
+		dev_err(&client->dev, "no supported mbus code found\n");
+		return -EINVAL;
+	}
+
+	smiapp_update_mbus_formats(sensor);
+
+	return 0;
+}
+
+static void smiapp_update_blanking(struct smiapp_sensor *sensor)
+{
+	struct v4l2_ctrl *vblank = sensor->vblank;
+	struct v4l2_ctrl *hblank = sensor->hblank;
+
+	vblank->minimum =
+		max_t(int,
+		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES],
+		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] -
+		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height);
+	vblank->maximum =
+		sensor->limits[SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN] -
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height;
+
+	vblank->val = clamp_t(int, vblank->val,
+			      vblank->minimum, vblank->maximum);
+	vblank->default_value = vblank->minimum;
+	vblank->val = vblank->val;
+	vblank->cur.val = vblank->val;
+
+	hblank->minimum =
+		max_t(int,
+		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] -
+		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width,
+		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]);
+	hblank->maximum =
+		sensor->limits[SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN] -
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width;
+
+	hblank->val = clamp_t(int, hblank->val,
+			      hblank->minimum, hblank->maximum);
+	hblank->default_value = hblank->minimum;
+	hblank->val = hblank->val;
+	hblank->cur.val = hblank->val;
+
+	__smiapp_update_exposure_limits(sensor);
+}
+
+static int smiapp_update_mode(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int binning_mode;
+	int rval;
+
+	dev_dbg(&client->dev, "frame size: %dx%d\n",
+		sensor->src->crop[SMIAPP_PAD_SRC].width,
+		sensor->src->crop[SMIAPP_PAD_SRC].height);
+	dev_dbg(&client->dev, "csi format width: %d\n",
+		sensor->csi_format->width);
+
+	/* Binning has to be set up here; it affects limits */
+	if (sensor->binning_horizontal == 1 &&
+	    sensor->binning_vertical == 1) {
+		binning_mode = 0;
+	} else {
+		u8 binning_type =
+			(sensor->binning_horizontal << 4)
+			| sensor->binning_vertical;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U8_BINNING_TYPE, binning_type);
+		if (rval < 0)
+			return rval;
+
+		binning_mode = 1;
+	}
+	rval = smiapp_write(client, SMIAPP_REG_U8_BINNING_MODE, binning_mode);
+	if (rval < 0)
+		return rval;
+
+	/* Get updated limits due to binning */
+	rval = smiapp_get_limits_binning(sensor);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_pll_update(sensor);
+	if (rval < 0)
+		return rval;
+
+	/* Output from pixel array, including blanking */
+	smiapp_update_blanking(sensor);
+
+	dev_dbg(&client->dev, "vblank\t\t%d\n", sensor->vblank->val);
+	dev_dbg(&client->dev, "hblank\t\t%d\n", sensor->hblank->val);
+
+	dev_dbg(&client->dev, "real timeperframe\t100/%d\n",
+		sensor->pll.vt_pix_clk_freq_hz /
+		((sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
+		  + sensor->hblank->val) *
+		 (sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+		  + sensor->vblank->val) / 100));
+
+	return 0;
+}
+
+/*
+ *
+ * SMIA++ NVM handling
+ *
+ */
+static int smiapp_read_nvm(struct smiapp_sensor *sensor,
+			   unsigned char *nvm)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 i, s, p, np, v;
+	int rval, rval2;
+
+	np = sensor->nvm_size / SMIAPP_NVM_PAGE_SIZE;
+	for (p = 0; p < np; p++) {
+		rval = smiapp_write(
+			client,
+			SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT, p);
+		if (rval)
+			goto out;
+
+		rval = smiapp_write(client,
+				    SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL,
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN |
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN);
+		if (rval)
+			goto out;
+
+		for (i = 0; i < 1000; i++) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s);
+
+			if (rval)
+				goto out;
+
+			if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY)
+				break;
+
+			if (--i == 0) {
+				rval = -ETIMEDOUT;
+				goto out;
+			}
+
+		}
+
+		for (i = 0; i < SMIAPP_NVM_PAGE_SIZE; i++) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 + i,
+				&v);
+			if (rval)
+				goto out;
+
+			*nvm++ = v;
+		}
+	}
+
+out:
+	rval2 = smiapp_write(client, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, 0);
+	if (rval < 0)
+		return rval;
+	else
+		return rval2;
+}
+
+/*
+ *
+ * SMIA++ CCI address control
+ *
+ */
+static int smiapp_change_cci_addr(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+	u32 val;
+
+	client->addr = sensor->platform_data->i2c_addr_dfl;
+
+	rval = smiapp_write(client,
+			    SMIAPP_REG_U8_CCI_ADDRESS_CONTROL,
+			    sensor->platform_data->i2c_addr_alt << 1);
+	if (rval)
+		return rval;
+
+	client->addr = sensor->platform_data->i2c_addr_alt;
+
+	/* verify addr change went ok */
+	rval = smiapp_read(client, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, &val);
+	if (rval)
+		return rval;
+
+	if (val != sensor->platform_data->i2c_addr_alt << 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ *
+ * SMIA++ Mode Control
+ *
+ */
+static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_flash_strobe_parms *strobe_setup;
+	unsigned int ext_freq = sensor->platform_data->ext_clk;
+	int rval;
+	u32 tmp;
+	u32 strobe_adjustment;
+	u32 strobe_width_high_rs;
+
+	strobe_setup = sensor->platform_data->strobe_setup;
+
+	/*
+	 * How to calculate registers related to strobe length. Please
+	 * do not change, or if you do at least know what you're
+	 * doing. :-)
+	 *
+	 * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> 2010-10-25
+	 *
+	 * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl
+	 *	/ EXTCLK freq [Hz]) * flash_strobe_adjustment
+	 *
+	 * tFlash_strobe_width_ctrl E N, [1 - 0xffff]
+	 * flash_strobe_adjustment E N, [1 - 0xff]
+	 *
+	 * The formula above is written as below to keep it on one
+	 * line:
+	 *
+	 * l / 10^6 = w / e * a
+	 *
+	 * Let's mark w * a by x:
+	 *
+	 * x = w * a
+	 *
+	 * Thus, we get:
+	 *
+	 * x = l * e / 10^6
+	 *
+	 * The strobe width must be at least as long as requested,
+	 * thus rounding upwards is needed.
+	 *
+	 * x = (l * e + 10^6 - 1) / 10^6
+	 * -----------------------------
+	 *
+	 * Maximum possible accuracy is wanted at all times. Thus keep
+	 * a as small as possible.
+	 *
+	 * Calculate a, assuming maximum w, with rounding upwards:
+	 *
+	 * a = (x + (2^16 - 1) - 1) / (2^16 - 1)
+	 * -------------------------------------
+	 *
+	 * Thus, we also get w, with that a, with rounding upwards:
+	 *
+	 * w = (x + a - 1) / a
+	 * -------------------
+	 *
+	 * To get limits:
+	 *
+	 * x E [1, (2^16 - 1) * (2^8 - 1)]
+	 *
+	 * Substituting maximum x to the original formula (with rounding),
+	 * the maximum l is thus
+	 *
+	 * (2^16 - 1) * (2^8 - 1) * 10^6 = l * e + 10^6 - 1
+	 *
+	 * l = (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / e
+	 * --------------------------------------------------
+	 *
+	 * flash_strobe_length must be clamped between 1 and
+	 * (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / EXTCLK freq.
+	 *
+	 * Then,
+	 *
+	 * flash_strobe_adjustment = ((flash_strobe_length *
+	 *	EXTCLK freq + 10^6 - 1) / 10^6 + (2^16 - 1) - 1) / (2^16 - 1)
+	 *
+	 * tFlash_strobe_width_ctrl = ((flash_strobe_length *
+	 *	EXTCLK freq + 10^6 - 1) / 10^6 +
+	 *	flash_strobe_adjustment - 1) / flash_strobe_adjustment
+	 */
+	tmp = div_u64(1000000ULL * ((1 << 16) - 1) * ((1 << 8) - 1) -
+		      1000000 + 1, ext_freq);
+	strobe_setup->strobe_width_high_us =
+		clamp_t(u32, strobe_setup->strobe_width_high_us, 1, tmp);
+
+	tmp = div_u64(((u64)strobe_setup->strobe_width_high_us * (u64)ext_freq +
+			1000000 - 1), 1000000ULL);
+	strobe_adjustment = (tmp + (1 << 16) - 1 - 1) / ((1 << 16) - 1);
+	strobe_width_high_rs = (tmp + strobe_adjustment - 1) /
+				strobe_adjustment;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_MODE_RS,
+			    strobe_setup->mode);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT,
+			    strobe_adjustment);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL,
+		strobe_width_high_rs);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL,
+			    strobe_setup->strobe_delay);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_FLASH_STROBE_START_POINT,
+			    strobe_setup->stobe_start_point);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_TRIGGER_RS,
+			    strobe_setup->trigger);
+
+out:
+	sensor->platform_data->strobe_setup->trigger = 0;
+
+	return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * Power management
+ */
+
+static int smiapp_power_on(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int sleep;
+	int rval;
+
+	rval = regulator_enable(sensor->vana);
+	if (rval) {
+		dev_err(&client->dev, "failed to enable vana regulator\n");
+		return rval;
+	}
+	usleep_range(1000, 1000);
+
+	rval = sensor->platform_data->set_xclk(&sensor->src->sd,
+					sensor->platform_data->ext_clk);
+	if (rval < 0) {
+		dev_dbg(&client->dev, "failed to set xclk\n");
+		goto out_xclk_fail;
+	}
+	usleep_range(1000, 1000);
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 1);
+
+	sleep = SMIAPP_RESET_DELAY(sensor->platform_data->ext_clk);
+	usleep_range(sleep, sleep);
+
+	/*
+	 * Failures to respond to the address change command have been noticed.
+	 * Those failures seem to be caused by the sensor requiring a longer
+	 * boot time than advertised. An additional 10ms delay seems to work
+	 * around the issue, but the SMIA++ I2C write retry hack makes the delay
+	 * unnecessary. The failures need to be investigated to find a proper
+	 * fix, and a delay will likely need to be added here if the I2C write
+	 * retry hack is reverted before the root cause of the boot time issue
+	 * is found.
+	 */
+
+	if (sensor->platform_data->i2c_addr_alt) {
+		rval = smiapp_change_cci_addr(sensor);
+		if (rval) {
+			dev_err(&client->dev, "cci address change error\n");
+			goto out_cci_addr_fail;
+		}
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_SOFTWARE_RESET,
+			    SMIAPP_SOFTWARE_RESET);
+	if (rval < 0) {
+		dev_err(&client->dev, "software reset failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	if (sensor->platform_data->i2c_addr_alt) {
+		rval = smiapp_change_cci_addr(sensor);
+		if (rval) {
+			dev_err(&client->dev, "cci address change error\n");
+			goto out_cci_addr_fail;
+		}
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_COMPRESSION_MODE,
+			    SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR);
+	if (rval) {
+		dev_err(&client->dev, "compression mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ,
+		sensor->platform_data->ext_clk / (1000000 / (1 << 8)));
+	if (rval) {
+		dev_err(&client->dev, "extclk frequency set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_CSI_LANE_MODE,
+			    sensor->platform_data->lanes - 1);
+	if (rval) {
+		dev_err(&client->dev, "csi lane mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FAST_STANDBY_CTRL,
+			    SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE);
+	if (rval) {
+		dev_err(&client->dev, "fast standby set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_CSI_SIGNALLING_MODE,
+			    sensor->platform_data->csi_signalling_mode);
+	if (rval) {
+		dev_err(&client->dev, "csi signalling mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	/* DPHY control done by sensor based on requested link rate */
+	rval = smiapp_write(client, SMIAPP_REG_U8_DPHY_CTRL,
+			    SMIAPP_DPHY_CTRL_UI);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_call_quirk(sensor, post_poweron);
+	if (rval) {
+		dev_err(&client->dev, "post_poweron quirks failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	/* Are we still initialising...? If yes, return here. */
+	if (!sensor->pixel_array)
+		return 0;
+
+	rval = v4l2_ctrl_handler_setup(
+		&sensor->pixel_array->ctrl_handler);
+	if (rval)
+		goto out_cci_addr_fail;
+
+	rval = v4l2_ctrl_handler_setup(&sensor->src->ctrl_handler);
+	if (rval)
+		goto out_cci_addr_fail;
+
+	mutex_lock(&sensor->mutex);
+	rval = smiapp_update_mode(sensor);
+	mutex_unlock(&sensor->mutex);
+	if (rval < 0)
+		goto out_cci_addr_fail;
+
+	return 0;
+
+out_cci_addr_fail:
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 0);
+	sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+
+out_xclk_fail:
+	regulator_disable(sensor->vana);
+	return rval;
+}
+
+static void smiapp_power_off(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	/*
+	 * Currently power/clock to lens are enable/disabled separately
+	 * but they are essentially the same signals. So if the sensor is
+	 * powered off while the lens is powered on the sensor does not
+	 * really see a power off and next time the cci address change
+	 * will fail. So do a soft reset explicitly here.
+	 */
+	if (sensor->platform_data->i2c_addr_alt)
+		smiapp_write(client,
+			     SMIAPP_REG_U8_SOFTWARE_RESET,
+			     SMIAPP_SOFTWARE_RESET);
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 0);
+	sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+	usleep_range(5000, 5000);
+	regulator_disable(sensor->vana);
+	sensor->streaming = 0;
+}
+
+static int smiapp_set_power(struct v4l2_subdev *subdev, int on)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ret = 0;
+
+	mutex_lock(&sensor->power_mutex);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0
+	 * to 0, update the power state.
+	 */
+	if (!sensor->power_count == !on)
+		goto out;
+
+	if (on) {
+		/* Power on and perform initialisation. */
+		ret = smiapp_power_on(sensor);
+		if (ret < 0)
+			goto out;
+	} else {
+		smiapp_power_off(sensor);
+	}
+
+	/* Update the power count. */
+	sensor->power_count += on ? 1 : -1;
+	WARN_ON(sensor->power_count < 0);
+
+out:
+	mutex_unlock(&sensor->power_mutex);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Video stream management
+ */
+
+static int smiapp_start_streaming(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_CSI_DATA_FORMAT,
+			    (sensor->csi_format->width << 8) |
+			    sensor->csi_format->compressed);
+	if (rval)
+		goto out;
+
+	rval = smiapp_pll_configure(sensor);
+	if (rval)
+		goto out;
+
+	/* Analog crop start coordinates */
+	rval = smiapp_write(client, SMIAPP_REG_U16_X_ADDR_START,
+			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_Y_ADDR_START,
+			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top);
+	if (rval < 0)
+		goto out;
+
+	/* Analog crop end coordinates */
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_X_ADDR_END,
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left
+		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width - 1);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_Y_ADDR_END,
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top
+		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height - 1);
+	if (rval < 0)
+		goto out;
+
+	/*
+	 * Output from pixel array, including blanking, is set using
+	 * controls below. No need to set here.
+	 */
+
+	/* Digital crop */
+	if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+	    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].left);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].top);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].width);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].height);
+		if (rval < 0)
+			goto out;
+	}
+
+	/* Scaling */
+	if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+	    != SMIAPP_SCALING_CAPABILITY_NONE) {
+		rval = smiapp_write(client, SMIAPP_REG_U16_SCALING_MODE,
+				    sensor->scaling_mode);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(client, SMIAPP_REG_U16_SCALE_M,
+				    sensor->scale_m);
+		if (rval < 0)
+			goto out;
+	}
+
+	/* Output size from sensor */
+	rval = smiapp_write(client, SMIAPP_REG_U16_X_OUTPUT_SIZE,
+			    sensor->src->crop[SMIAPP_PAD_SRC].width);
+	if (rval < 0)
+		goto out;
+	rval = smiapp_write(client, SMIAPP_REG_U16_Y_OUTPUT_SIZE,
+			    sensor->src->crop[SMIAPP_PAD_SRC].height);
+	if (rval < 0)
+		goto out;
+
+	if ((sensor->flash_capability &
+	     (SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE |
+	      SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) &&
+	    sensor->platform_data->strobe_setup != NULL &&
+	    sensor->platform_data->strobe_setup->trigger != 0) {
+		rval = smiapp_setup_flash_strobe(sensor);
+		if (rval)
+			goto out;
+	}
+
+	rval = smiapp_call_quirk(sensor, pre_streamon);
+	if (rval) {
+		dev_err(&client->dev, "pre_streamon quirks failed\n");
+		goto out;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_MODE_SELECT,
+			    SMIAPP_MODE_SELECT_STREAMING);
+
+out:
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static int smiapp_stop_streaming(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = smiapp_write(client, SMIAPP_REG_U8_MODE_SELECT,
+			    SMIAPP_MODE_SELECT_SOFTWARE_STANDBY);
+	if (rval)
+		goto out;
+
+	rval = smiapp_call_quirk(sensor, post_streamoff);
+	if (rval)
+		dev_err(&client->dev, "post_streamoff quirks failed\n");
+
+out:
+	mutex_unlock(&sensor->mutex);
+	return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev video operations
+ */
+
+static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	if (sensor->streaming == enable)
+		return 0;
+
+	if (enable) {
+		sensor->streaming = 1;
+		rval = smiapp_start_streaming(sensor);
+		if (rval < 0)
+			sensor->streaming = 0;
+	} else {
+		rval = smiapp_stop_streaming(sensor);
+		sensor->streaming = 0;
+	}
+
+	return rval;
+}
+
+static int smiapp_enum_mbus_code(struct v4l2_subdev *subdev,
+				 struct v4l2_subdev_fh *fh,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int i, idx = -1;
+	int rval = -EINVAL;
+
+	mutex_lock(&sensor->mutex);
+
+	dev_err(&client->dev, "subdev %s, pad %d, index %d\n",
+		subdev->name, code->pad, code->index);
+
+	if (subdev != &sensor->src->sd
+	    || code->pad != SMIAPP_PAD_SRC) {
+		if (code->index)
+			goto out;
+
+		code->code = sensor->internal_csi_format->code;
+		rval = 0;
+		goto out;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+		if (sensor->mbus_frame_fmts & (1 << i))
+			idx++;
+
+		if (idx == code->index) {
+			code->code = smiapp_csi_data_formats[i].code;
+			dev_err(&client->dev, "found index %d, i %d, code %x\n",
+				code->index, i, code->code);
+			rval = 0;
+			break;
+		}
+	}
+
+out:
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static int __smiapp_get_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad);
+	} else {
+		struct v4l2_rect *r;
+
+		if (fmt->pad == ssd->source_pad)
+			r = &ssd->crop[ssd->source_pad];
+		else
+			r = &ssd->sink_fmt;
+
+		fmt->format.width = r->width;
+		fmt->format.height = r->height;
+		if (subdev == &sensor->src->sd
+		    && fmt->pad == SMIAPP_PAD_SRC)
+			fmt->format.code = sensor->csi_format->code;
+		else
+			fmt->format.code = sensor->internal_csi_format->code;
+	}
+
+	return 0;
+}
+
+static int smiapp_get_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = __smiapp_get_format(subdev, fh, fmt);
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static void smiapp_get_crop_compose(struct v4l2_subdev *subdev,
+				    struct v4l2_subdev_fh *fh,
+				    struct v4l2_rect **crops,
+				    struct v4l2_rect **comps, int which)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	int i;
+
+	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		if (crops)
+			for (i = 0; i < subdev->entity.num_pads; i++)
+				crops[i] = &ssd->crop[i];
+		if (comps)
+			*comps = &ssd->compose;
+	} else {
+		if (crops) {
+			for (i = 0; i < subdev->entity.num_pads; i++) {
+				crops[i] = v4l2_subdev_get_try_crop(fh, i);
+				BUG_ON(!crops[i]);
+			}
+		}
+		if (comps) {
+			*comps = v4l2_subdev_get_try_compose(fh,
+							     SMIAPP_PAD_SINK);
+			BUG_ON(!*comps);
+		}
+	}
+}
+
+/* Changes require propagation only on sink pad. */
+static void smiapp_propagate(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh, int which,
+			     int target)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, which);
+
+	switch (target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE:
+		comp->width = crops[SMIAPP_PAD_SINK]->width;
+		comp->height = crops[SMIAPP_PAD_SINK]->height;
+		if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+			if (ssd == sensor->scaler) {
+				sensor->scale_m =
+					sensor->limits[
+						SMIAPP_LIMIT_SCALER_N_MIN];
+				sensor->scaling_mode =
+					SMIAPP_SCALING_MODE_NONE;
+			} else if (ssd == sensor->binner) {
+				sensor->binning_horizontal = 1;
+				sensor->binning_vertical = 1;
+			}
+		}
+		/* Fall through */
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE:
+		*crops[SMIAPP_PAD_SRC] = *comp;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static int smiapp_set_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *crops[SMIAPP_PADS];
+	const struct smiapp_csi_data_format *csi_format = sensor->csi_format;
+	int i;
+
+	mutex_lock(&sensor->mutex);
+
+	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
+
+	if (subdev == &sensor->src->sd && fmt->pad == SMIAPP_PAD_SRC) {
+		for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+			if (sensor->mbus_frame_fmts & (1 << i) &&
+			    smiapp_csi_data_formats[i].code
+			    == fmt->format.code) {
+				csi_format = &smiapp_csi_data_formats[i];
+				if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+					sensor->csi_format = csi_format;
+				break;
+			}
+		}
+	}
+
+	if (fmt->pad == ssd->source_pad) {
+		int rval;
+
+		rval = __smiapp_get_format(subdev, fh, fmt);
+		fmt->format.code = csi_format->code;
+
+		mutex_unlock(&sensor->mutex);
+		return rval;
+	}
+
+	fmt->format.code = csi_format->code;
+	fmt->format.width &= ~1;
+	fmt->format.height &= ~1;
+
+	fmt->format.width =
+		clamp(fmt->format.width,
+		      sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
+		      sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
+	fmt->format.height =
+		clamp(fmt->format.height,
+		      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
+		      sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
+
+	crops[ssd->sink_pad]->left = 0;
+	crops[ssd->sink_pad]->top = 0;
+	crops[ssd->sink_pad]->width = fmt->format.width;
+	crops[ssd->sink_pad]->height = fmt->format.height;
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		ssd->sink_fmt = *crops[ssd->sink_pad];
+	smiapp_propagate(subdev, fh, fmt->which,
+			 V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE);
+
+	mutex_unlock(&sensor->mutex);
+
+	return 0;
+}
+
+/*
+ * Calculate goodness of scaled image size compared to expected image
+ * size and flags provided.
+ */
+#define SCALING_GOODNESS		100000
+#define SCALING_GOODNESS_EXTREME	100000000
+static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w,
+			    int h, int ask_h, u32 flags)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	int val = 0;
+
+	w &= ~1;
+	ask_w &= ~1;
+	h &= ~1;
+	ask_h &= ~1;
+
+	if (flags & V4L2_SUBDEV_SEL_FLAG_SIZE_GE) {
+		if (w < ask_w)
+			val -= SCALING_GOODNESS;
+		if (h < ask_h)
+			val -= SCALING_GOODNESS;
+	}
+
+	if (flags & V4L2_SUBDEV_SEL_FLAG_SIZE_LE) {
+		if (w > ask_w)
+			val -= SCALING_GOODNESS;
+		if (h > ask_h)
+			val -= SCALING_GOODNESS;
+	}
+
+	val -= abs(w - ask_w);
+	val -= abs(h - ask_h);
+
+	if (w < sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE])
+		val -= SCALING_GOODNESS_EXTREME;
+
+	dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n",
+		w, ask_h, h, ask_h, val);
+
+	return val;
+}
+
+static void smiapp_set_compose_binner(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_fh *fh,
+				      struct v4l2_subdev_selection *sel,
+				      struct v4l2_rect **crops,
+				      struct v4l2_rect *comp)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int i;
+	int binh = 1, binv = 1;
+	int best = scaling_goodness(
+		subdev,
+		crops[SMIAPP_PAD_SINK]->width, sel->r.width,
+		crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags);
+
+	for (i = 0; i < sensor->nbinning_subtypes; i++) {
+		int this = scaling_goodness(
+			subdev,
+			crops[SMIAPP_PAD_SINK]->width
+			/ sensor->binning_subtypes[i].horizontal,
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height
+			/ sensor->binning_subtypes[i].vertical,
+			sel->r.height, sel->flags);
+
+		if (this > best) {
+			binh = sensor->binning_subtypes[i].horizontal;
+			binv = sensor->binning_subtypes[i].vertical;
+			best = this;
+		}
+	}
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sensor->binning_vertical = binv;
+		sensor->binning_horizontal = binh;
+	}
+
+	sel->r.width = (crops[SMIAPP_PAD_SINK]->width / binh) & ~1;
+	sel->r.height = (crops[SMIAPP_PAD_SINK]->height / binv) & ~1;
+}
+
+/*
+ * Calculate best scaling ratio and mode for given output resolution.
+ *
+ * Try all of these: horizontal ratio, vertical ratio and smallest
+ * size possible (horizontally).
+ *
+ * Also try whether horizontal scaler or full scaler gives a better
+ * result.
+ */
+static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_fh *fh,
+				      struct v4l2_subdev_selection *sel,
+				      struct v4l2_rect **crops,
+				      struct v4l2_rect *comp)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	u32 min, max, a, b, max_m;
+	u32 scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+	int mode = SMIAPP_SCALING_MODE_HORIZONTAL;
+	u32 try[4];
+	u32 ntry = 0;
+	int i;
+	int best = INT_MIN;
+
+	sel->r.width = min_t(unsigned int, sel->r.width,
+			     crops[SMIAPP_PAD_SINK]->width);
+	sel->r.height = min_t(unsigned int, sel->r.height,
+			      crops[SMIAPP_PAD_SINK]->height);
+
+	a = crops[SMIAPP_PAD_SINK]->width
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.width;
+	b = crops[SMIAPP_PAD_SINK]->height
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.height;
+	max_m = crops[SMIAPP_PAD_SINK]->width
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]
+		/ sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE];
+
+	a = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		max(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	b = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		max(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	max_m = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		    max(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+
+	dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m);
+
+	min = min(max_m, min(a, b));
+	max = min(max_m, max(a, b));
+
+	try[ntry] = min;
+	ntry++;
+	if (min != max) {
+		try[ntry] = max;
+		ntry++;
+	}
+	if (max != max_m) {
+		try[ntry] = min + 1;
+		ntry++;
+		if (min != max) {
+			try[ntry] = max + 1;
+			ntry++;
+		}
+	}
+
+	for (i = 0; i < ntry; i++) {
+		int this = scaling_goodness(
+			subdev,
+			crops[SMIAPP_PAD_SINK]->width
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height,
+			sel->r.height,
+			sel->flags);
+
+		dev_dbg(&client->dev, "trying factor %d (%d)\n", try[i], i);
+
+		if (this > best) {
+			scale_m = try[i];
+			mode = SMIAPP_SCALING_MODE_HORIZONTAL;
+			best = this;
+		}
+
+		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
+			continue;
+
+		this = scaling_goodness(
+			subdev, crops[SMIAPP_PAD_SINK]->width
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.height,
+			sel->flags);
+
+		if (this > best) {
+			scale_m = try[i];
+			mode = SMIAPP_SCALING_MODE_BOTH;
+			best = this;
+		}
+	}
+
+	sel->r.width =
+		(crops[SMIAPP_PAD_SINK]->width
+		 / scale_m
+		 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) & ~1;
+	if (mode == SMIAPP_SCALING_MODE_BOTH)
+		sel->r.height =
+			(crops[SMIAPP_PAD_SINK]->height
+			 / scale_m
+			 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN])
+			& ~1;
+	else
+		sel->r.height = crops[SMIAPP_PAD_SINK]->height;
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sensor->scale_m = scale_m;
+		sensor->scaling_mode = mode;
+	}
+}
+/* We're only called on source pads. This function sets scaling. */
+static int smiapp_set_compose(struct v4l2_subdev *subdev,
+			      struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
+
+	sel->r.top = 0;
+	sel->r.left = 0;
+
+	if (ssd == sensor->binner)
+		smiapp_set_compose_binner(subdev, fh, sel, crops, comp);
+	else
+		smiapp_set_compose_scaler(subdev, fh, sel, crops, comp);
+
+	*comp = sel->r;
+	smiapp_propagate(subdev, fh, sel->which,
+			 V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		return smiapp_update_mode(sensor);
+
+	return 0;
+}
+
+static int __smiapp_sel_supported(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+
+	/* We only implement crop in three places. */
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE:
+	case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS:
+		if (ssd == sensor->pixel_array
+		    && sel->pad == SMIAPP_PA_PAD_SRC)
+			return 0;
+		if (ssd == sensor->src
+		    && sel->pad == SMIAPP_PAD_SRC)
+			return 0;
+		if (ssd == sensor->scaler
+		    && sel->pad == SMIAPP_PAD_SINK
+		    && sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+		    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP)
+			return 0;
+		return -EINVAL;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE:
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
+		if (sel->pad == ssd->source_pad)
+			return -EINVAL;
+		if (ssd == sensor->binner)
+			return 0;
+		if (ssd == sensor->scaler
+		    && sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    != SMIAPP_SCALING_CAPABILITY_NONE)
+			return 0;
+		/* Fall through */
+	default:
+		return -EINVAL;
+	}
+}
+
+static int smiapp_set_crop(struct v4l2_subdev *subdev,
+			   struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *src_size, *crops[SMIAPP_PADS];
+	struct v4l2_rect _r;
+
+	smiapp_get_crop_compose(subdev, fh, crops, NULL, sel->which);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		if (sel->pad == ssd->sink_pad)
+			src_size = &ssd->sink_fmt;
+		else
+			src_size = &ssd->compose;
+	} else {
+		if (sel->pad == ssd->sink_pad) {
+			_r.left = 0;
+			_r.top = 0;
+			_r.width = v4l2_subdev_get_try_format(fh, sel->pad)
+				->width;
+			_r.height = v4l2_subdev_get_try_format(fh, sel->pad)
+				->height;
+			src_size = &_r;
+		} else {
+			src_size =
+				v4l2_subdev_get_try_compose(
+					fh, ssd->sink_pad);
+		}
+	}
+
+	if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) {
+		sel->r.left = 0;
+		sel->r.top = 0;
+	}
+
+	sel->r.width = min(sel->r.width, src_size->width);
+	sel->r.height = min(sel->r.height, src_size->height);
+
+	sel->r.left = min(sel->r.left, src_size->width - sel->r.width);
+	sel->r.top = min(sel->r.top, src_size->height - sel->r.height);
+
+	*crops[sel->pad] = sel->r;
+
+	if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK)
+		smiapp_propagate(subdev, fh, sel->which,
+				 V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE);
+
+	return 0;
+}
+
+static int __smiapp_get_selection(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+	struct v4l2_rect sink_fmt;
+	int ret;
+
+	ret = __smiapp_sel_supported(subdev, sel);
+	if (ret)
+		return ret;
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sink_fmt = ssd->sink_fmt;
+	} else {
+		struct v4l2_mbus_framefmt *fmt =
+			v4l2_subdev_get_try_format(fh, ssd->sink_pad);
+
+		sink_fmt.left = 0;
+		sink_fmt.top = 0;
+		sink_fmt.width = fmt->width;
+		sink_fmt.height = fmt->height;
+	}
+
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS:
+		if (ssd == sensor->pixel_array) {
+			sel->r.width =
+				sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+			sel->r.height =
+				sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		} else if (sel->pad == ssd->sink_pad) {
+			sel->r = sink_fmt;
+		} else {
+			sel->r = *comp;
+		}
+		break;
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE:
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
+		sel->r = *crops[sel->pad];
+		break;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE:
+		sel->r = *comp;
+		break;
+	}
+
+	return 0;
+}
+
+static int smiapp_get_selection(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = __smiapp_get_selection(subdev, fh, sel);
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+static int smiapp_set_selection(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ret;
+
+	ret = __smiapp_sel_supported(subdev, sel);
+	if (ret)
+		return ret;
+
+	mutex_lock(&sensor->mutex);
+
+	sel->r.left = max(0, sel->r.left & ~1);
+	sel->r.top = max(0, sel->r.top & ~1);
+	sel->r.width = max(0, SMIAPP_ALIGN_DIM(sel->r.width, sel->flags));
+	sel->r.height = max(0, SMIAPP_ALIGN_DIM(sel->r.height, sel->flags));
+
+	sel->r.width = max_t(unsigned int,
+			     sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
+			     sel->r.width);
+	sel->r.height = max_t(unsigned int,
+			      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
+			      sel->r.height);
+
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE:
+		ret = smiapp_set_crop(subdev, fh, sel);
+		break;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE:
+		ret = smiapp_set_compose(subdev, fh, sel);
+		break;
+	default:
+		BUG();
+	}
+
+	mutex_unlock(&sensor->mutex);
+	return ret;
+}
+
+static int smiapp_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	*frames = sensor->frame_skip;
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * sysfs attributes
+ */
+
+static ssize_t
+smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
+		      char *buf)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int nbytes;
+
+	if (!sensor->dev_init_done)
+		return -EBUSY;
+
+	if (!sensor->nvm_size) {
+		/* NVM not read yet - read it now */
+		sensor->nvm_size = sensor->platform_data->nvm_size;
+		if (smiapp_set_power(subdev, 1) < 0)
+			return -ENODEV;
+		if (smiapp_read_nvm(sensor, sensor->nvm)) {
+			dev_err(&client->dev, "nvm read failed\n");
+			return -ENODEV;
+		}
+		smiapp_set_power(subdev, 0);
+	}
+	/*
+	 * NVM is still way below a PAGE_SIZE, so we can safely
+	 * assume this for now.
+	 */
+	nbytes = min_t(unsigned int, sensor->nvm_size, PAGE_SIZE);
+	memcpy(buf, sensor->nvm, nbytes);
+
+	return nbytes;
+}
+static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL);
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev core operations
+ */
+
+static int smiapp_identify_module(struct v4l2_subdev *subdev)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	int i, rval = 0;
+	struct smiapp_module_info *minfo = &sensor->minfo;
+
+	minfo->name = SMIAPP_NAME;
+
+	/* Module info */
+	rval = smiapp_read(client, SMIAPP_REG_U8_MANUFACTURER_ID,
+			   &minfo->manufacturer_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U16_MODEL_ID,
+				   &minfo->model_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_REVISION_NUMBER_MAJOR,
+				   &minfo->revision_number_major);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_REVISION_NUMBER_MINOR,
+				   &minfo->revision_number_minor);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_YEAR,
+				   &minfo->module_year);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_MONTH,
+				   &minfo->module_month);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_DAY,
+				   &minfo->module_day);
+
+	/* Sensor info */
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID,
+				   &minfo->sensor_manufacturer_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U16_SENSOR_MODEL_ID,
+				   &minfo->sensor_model_id);
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_REVISION_NUMBER,
+				   &minfo->sensor_revision_number);
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION,
+				   &minfo->sensor_firmware_version);
+
+	/* SMIA */
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_SMIA_VERSION,
+				   &minfo->smia_version);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_SMIAPP_VERSION,
+				   &minfo->smiapp_version);
+
+	if (rval) {
+		dev_err(&client->dev, "sensor detection failed\n");
+		return -ENODEV;
+	}
+
+	dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n",
+		minfo->manufacturer_id, minfo->model_id);
+
+	dev_dbg(&client->dev,
+		"module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n",
+		minfo->revision_number_major, minfo->revision_number_minor,
+		minfo->module_year, minfo->module_month, minfo->module_day);
+
+	dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n",
+		minfo->sensor_manufacturer_id, minfo->sensor_model_id);
+
+	dev_dbg(&client->dev,
+		"sensor revision 0x%2.2x firmware version 0x%2.2x\n",
+		minfo->sensor_revision_number, minfo->sensor_firmware_version);
+
+	dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n",
+		minfo->smia_version, minfo->smiapp_version);
+
+	/*
+	 * Some modules have bad data in the lvalues below. Hope the
+	 * rvalues have better stuff. The lvalues are module
+	 * parameters whereas the rvalues are sensor parameters.
+	 */
+	if (!minfo->manufacturer_id && !minfo->model_id) {
+		minfo->manufacturer_id = minfo->sensor_manufacturer_id;
+		minfo->model_id = minfo->sensor_model_id;
+		minfo->revision_number_major = minfo->sensor_revision_number;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) {
+		if (smiapp_module_idents[i].manufacturer_id
+		    != minfo->manufacturer_id)
+			continue;
+		if (smiapp_module_idents[i].model_id != minfo->model_id)
+			continue;
+		if (smiapp_module_idents[i].flags
+		    & SMIAPP_MODULE_IDENT_FLAG_REV_LE) {
+			if (smiapp_module_idents[i].revision_number_major
+			    < minfo->revision_number_major)
+				continue;
+		} else {
+			if (smiapp_module_idents[i].revision_number_major
+			    != minfo->revision_number_major)
+				continue;
+		}
+
+		minfo->name = smiapp_module_idents[i].name;
+		minfo->quirk = smiapp_module_idents[i].quirk;
+		break;
+	}
+
+	if (i >= ARRAY_SIZE(smiapp_module_idents))
+		dev_warn(&client->dev,
+			 "no quirks for this module; let's hope it's fully compliant\n");
+
+	dev_dbg(&client->dev, "the sensor is called %s, ident %2.2x%4.4x%2.2x\n",
+		minfo->name, minfo->manufacturer_id, minfo->model_id,
+		minfo->revision_number_major);
+
+	strlcpy(subdev->name, sensor->minfo.name, sizeof(subdev->name));
+
+	return 0;
+}
+
+static const struct v4l2_subdev_ops smiapp_ops;
+static const struct v4l2_subdev_internal_ops smiapp_internal_ops;
+static const struct media_entity_operations smiapp_entity_ops;
+
+static int smiapp_registered(struct v4l2_subdev *subdev)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_subdev *last = NULL;
+	int rval;
+	u32 tmp, i;
+
+	sensor->vana = regulator_get(&client->dev, "VANA");
+	if (IS_ERR(sensor->vana)) {
+		dev_err(&client->dev, "could not get regulator for vana\n");
+		return -ENODEV;
+	}
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) {
+		if (gpio_request_one(sensor->platform_data->xshutdown, 0,
+				     "SMIA++ xshutdown") != 0) {
+			dev_err(&client->dev,
+				"unable to acquire reset gpio %d\n",
+				sensor->platform_data->xshutdown);
+			rval = -ENODEV;
+			goto out_gpio_request;
+		}
+	}
+
+	rval = smiapp_power_on(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_smiapp_power_on;
+	}
+
+	rval = smiapp_identify_module(subdev);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	rval = smiapp_get_all_limits(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	/*
+	 * Handle Sensor Module orientation on the board.
+	 *
+	 * The application of H-FLIP and V-FLIP on the sensor is modified by
+	 * the sensor orientation on the board.
+	 *
+	 * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set
+	 * both H-FLIP and V-FLIP for normal operation which also implies
+	 * that a set/unset operation for user space HFLIP and VFLIP v4l2
+	 * controls will need to be internally inverted.
+	 *
+	 * Rotation also changes the bayer pattern.
+	 */
+	if (sensor->platform_data->module_board_orient ==
+	    SMIAPP_MODULE_BOARD_ORIENT_180)
+		sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP |
+					  SMIAPP_IMAGE_ORIENTATION_VFLIP;
+
+	rval = smiapp_get_mbus_formats(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) {
+		int i;
+		int val;
+
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_BINNING_SUBTYPES, &val);
+		if (rval < 0) {
+			rval = -ENODEV;
+			goto out_power_off;
+		}
+		sensor->nbinning_subtypes = min_t(u8, val,
+						  SMIAPP_BINNING_SUBTYPES);
+
+		for (i = 0; i < sensor->nbinning_subtypes; i++) {
+			rval = smiapp_read(
+				client, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val);
+			if (rval < 0) {
+				rval = -ENODEV;
+				goto out_power_off;
+			}
+			sensor->binning_subtypes[i] =
+				*(struct smiapp_binning_subtype *)&val;
+
+			dev_dbg(&client->dev, "binning %xx%x\n",
+				sensor->binning_subtypes[i].horizontal,
+				sensor->binning_subtypes[i].vertical);
+		}
+	}
+	sensor->binning_horizontal = 1;
+	sensor->binning_vertical = 1;
+
+	/* SMIA++ NVM initialization - it will be read from the sensor
+	 * when it is first requested by userspace.
+	 */
+	if (sensor->minfo.smiapp_version && sensor->platform_data->nvm_size) {
+		sensor->nvm = kzalloc(sensor->platform_data->nvm_size,
+				      GFP_KERNEL);
+		if (sensor->nvm == NULL) {
+			dev_err(&client->dev, "nvm buf allocation failed\n");
+			rval = -ENOMEM;
+			goto out_power_off;
+		}
+
+		if (device_create_file(&client->dev, &dev_attr_nvm) != 0) {
+			dev_err(&client->dev, "sysfs nvm entry failed\n");
+			rval = -EBUSY;
+			goto out_power_off;
+		}
+	}
+
+	rval = smiapp_call_quirk(sensor, limits);
+	if (rval) {
+		dev_err(&client->dev, "limits quirks failed\n");
+		goto out_nvm_release;
+	}
+
+	/* We consider this as profile 0 sensor if any of these are zero. */
+	if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) {
+		sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0;
+	} else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		   != SMIAPP_SCALING_CAPABILITY_NONE) {
+		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
+			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1;
+		else
+			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2;
+		sensor->scaler = &sensor->ssds[sensor->ssds_used];
+		sensor->ssds_used++;
+	} else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+		   == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
+		sensor->scaler = &sensor->ssds[sensor->ssds_used];
+		sensor->ssds_used++;
+	}
+	sensor->binner = &sensor->ssds[sensor->ssds_used];
+	sensor->ssds_used++;
+	sensor->pixel_array = &sensor->ssds[sensor->ssds_used];
+	sensor->ssds_used++;
+
+	sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+
+	for (i = 0; i < SMIAPP_SUBDEVS; i++) {
+		struct {
+			struct smiapp_subdev *ssd;
+			char *name;
+		} const __this[] = {
+			{ sensor->scaler, "scaler", },
+			{ sensor->binner, "binner", },
+			{ sensor->pixel_array, "pixel array", },
+		}, *_this = &__this[i];
+		struct smiapp_subdev *this = _this->ssd;
+
+		if (!this)
+			continue;
+
+		if (this != sensor->src)
+			v4l2_subdev_init(&this->sd, &smiapp_ops);
+
+		this->sensor = sensor;
+
+		if (this == sensor->pixel_array) {
+			this->npads = 1;
+		} else {
+			this->npads = 2;
+			this->source_pad = 1;
+		}
+
+		snprintf(this->sd.name,
+			 sizeof(this->sd.name), "%s %s",
+			 sensor->minfo.name, _this->name);
+
+		this->sink_fmt.width =
+			sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+		this->sink_fmt.height =
+			sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		this->compose.width = this->sink_fmt.width;
+		this->compose.height = this->sink_fmt.height;
+		this->crop[this->source_pad] = this->compose;
+		this->pads[this->source_pad].flags = MEDIA_PAD_FL_SOURCE;
+		if (this != sensor->pixel_array) {
+			this->crop[this->sink_pad] = this->compose;
+			this->pads[this->sink_pad].flags = MEDIA_PAD_FL_SINK;
+		}
+
+		this->sd.entity.ops = &smiapp_entity_ops;
+
+		if (last == NULL) {
+			last = this;
+			continue;
+		}
+
+		this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+		this->sd.internal_ops = &smiapp_internal_ops;
+		this->sd.owner = NULL;
+		v4l2_set_subdevdata(&this->sd, client);
+
+		rval = media_entity_init(&this->sd.entity,
+					 this->npads, this->pads, 0);
+		if (rval) {
+			dev_err(&client->dev,
+				"media_entity_init failed\n");
+			goto out_nvm_release;
+		}
+
+		rval = media_entity_create_link(&this->sd.entity,
+						this->source_pad,
+						&last->sd.entity,
+						last->sink_pad,
+						MEDIA_LNK_FL_ENABLED |
+						MEDIA_LNK_FL_IMMUTABLE);
+		if (rval) {
+			dev_err(&client->dev,
+				"media_entity_create_link failed\n");
+			goto out_nvm_release;
+		}
+
+		rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev,
+						   &this->sd);
+		if (rval) {
+			dev_err(&client->dev,
+				"v4l2_device_register_subdev failed\n");
+			goto out_nvm_release;
+		}
+
+		last = this;
+	}
+
+	dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile);
+
+	sensor->pixel_array->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+
+	/* final steps */
+	smiapp_read_frame_fmt(sensor);
+	rval = smiapp_init_controls(sensor);
+	if (rval < 0)
+		goto out_nvm_release;
+
+	rval = smiapp_update_mode(sensor);
+	if (rval) {
+		dev_err(&client->dev, "update mode failed\n");
+		goto out_nvm_release;
+	}
+
+	sensor->streaming = false;
+	sensor->dev_init_done = true;
+
+	/* check flash capability */
+	rval = smiapp_read(client, SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, &tmp);
+	sensor->flash_capability = tmp;
+	if (rval)
+		goto out_nvm_release;
+
+	smiapp_power_off(sensor);
+
+	return 0;
+
+out_nvm_release:
+	device_remove_file(&client->dev, &dev_attr_nvm);
+
+out_power_off:
+	kfree(sensor->nvm);
+	sensor->nvm = NULL;
+	smiapp_power_off(sensor);
+
+out_smiapp_power_on:
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_free(sensor->platform_data->xshutdown);
+
+out_gpio_request:
+	regulator_put(sensor->vana);
+	sensor->vana = NULL;
+	return rval;
+}
+
+static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(sd);
+	struct smiapp_sensor *sensor = ssd->sensor;
+	u32 mbus_code =
+		smiapp_csi_data_formats[smiapp_pixel_order(sensor)].code;
+	int i;
+
+	mutex_lock(&sensor->mutex);
+
+	for (i = 0; i < ssd->npads; i++) {
+		struct v4l2_mbus_framefmt *try_fmt =
+			v4l2_subdev_get_try_format(fh, i);
+		struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(fh, i);
+		struct v4l2_rect *try_comp;
+
+		try_fmt->width = sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+		try_fmt->height = sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		try_fmt->code = mbus_code;
+
+		try_crop->top = 0;
+		try_crop->left = 0;
+		try_crop->width = try_fmt->width;
+		try_crop->height = try_fmt->height;
+
+		if (ssd != sensor->pixel_array)
+			continue;
+
+		try_comp = v4l2_subdev_get_try_compose(fh, i);
+		*try_comp = *try_crop;
+	}
+
+	mutex_unlock(&sensor->mutex);
+
+	return smiapp_set_power(sd, 1);
+}
+
+static int smiapp_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	return smiapp_set_power(sd, 0);
+}
+
+static const struct v4l2_subdev_video_ops smiapp_video_ops = {
+	.s_stream = smiapp_set_stream,
+};
+
+static const struct v4l2_subdev_core_ops smiapp_core_ops = {
+	.s_power = smiapp_set_power,
+};
+
+static const struct v4l2_subdev_pad_ops smiapp_pad_ops = {
+	.enum_mbus_code = smiapp_enum_mbus_code,
+	.get_fmt = smiapp_get_format,
+	.set_fmt = smiapp_set_format,
+	.get_selection = smiapp_get_selection,
+	.set_selection = smiapp_set_selection,
+};
+
+static const struct v4l2_subdev_sensor_ops smiapp_sensor_ops = {
+	.g_skip_frames = smiapp_get_skip_frames,
+};
+
+static const struct v4l2_subdev_ops smiapp_ops = {
+	.core = &smiapp_core_ops,
+	.video = &smiapp_video_ops,
+	.pad = &smiapp_pad_ops,
+	.sensor = &smiapp_sensor_ops,
+};
+
+static const struct media_entity_operations smiapp_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = {
+	.registered = smiapp_registered,
+	.open = smiapp_open,
+	.close = smiapp_close,
+};
+
+static const struct v4l2_subdev_internal_ops smiapp_internal_ops = {
+	.open = smiapp_open,
+	.close = smiapp_close,
+};
+
+/* -----------------------------------------------------------------------------
+ * I2C Driver
+ */
+
+#ifdef CONFIG_PM
+
+static int smiapp_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ss;
+
+	BUG_ON(mutex_is_locked(&sensor->mutex));
+
+	if (sensor->power_count == 0)
+		return 0;
+
+	if (sensor->streaming)
+		smiapp_stop_streaming(sensor);
+
+	ss = sensor->streaming;
+
+	smiapp_power_off(sensor);
+
+	/* save state for resume */
+	sensor->streaming = ss;
+
+	return 0;
+}
+
+static int smiapp_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	if (sensor->power_count == 0)
+		return 0;
+
+	rval = smiapp_power_on(sensor);
+	if (rval)
+		return rval;
+
+	if (sensor->streaming)
+		rval = smiapp_start_streaming(sensor);
+
+	return rval;
+}
+
+#else
+
+#define smiapp_suspend	NULL
+#define smiapp_resume	NULL
+
+#endif /* CONFIG_PM */
+
+static int smiapp_probe(struct i2c_client *client,
+			const struct i2c_device_id *devid)
+{
+	struct smiapp_sensor *sensor;
+	int rval;
+
+	if (client->dev.platform_data == NULL)
+		return -ENODEV;
+
+	sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
+	if (sensor == NULL)
+		return -ENOMEM;
+
+	sensor->platform_data = client->dev.platform_data;
+	mutex_init(&sensor->mutex);
+	mutex_init(&sensor->power_mutex);
+	sensor->src = &sensor->ssds[sensor->ssds_used];
+
+	v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops);
+	sensor->src->sd.internal_ops = &smiapp_internal_src_ops;
+	sensor->src->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sensor->src->sensor = sensor;
+
+	sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE;
+	rval = media_entity_init(&sensor->src->sd.entity, 2,
+				 sensor->src->pads, 0);
+	if (rval < 0)
+		kfree(sensor);
+
+	return rval;
+}
+
+static int __exit smiapp_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int i;
+
+	if (sensor->power_count) {
+		if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+			gpio_set_value(sensor->platform_data->xshutdown, 0);
+		sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+		sensor->power_count = 0;
+	}
+
+	if (sensor->nvm) {
+		device_remove_file(&client->dev, &dev_attr_nvm);
+		kfree(sensor->nvm);
+	}
+
+	for (i = 0; i < sensor->ssds_used; i++) {
+		media_entity_cleanup(&sensor->ssds[i].sd.entity);
+		v4l2_device_unregister_subdev(&sensor->ssds[i].sd);
+	}
+	smiapp_free_controls(sensor);
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_free(sensor->platform_data->xshutdown);
+	if (sensor->vana)
+		regulator_put(sensor->vana);
+
+	kfree(sensor);
+
+	return 0;
+}
+
+static const struct i2c_device_id smiapp_id_table[] = {
+	{ SMIAPP_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, smiapp_id_table);
+
+static const struct dev_pm_ops smiapp_pm_ops = {
+	.suspend	= smiapp_suspend,
+	.resume		= smiapp_resume,
+};
+
+static struct i2c_driver smiapp_i2c_driver = {
+	.driver	= {
+		.name = SMIAPP_NAME,
+		.pm = &smiapp_pm_ops,
+	},
+	.probe	= smiapp_probe,
+	.remove	= __exit_p(smiapp_remove),
+	.id_table = smiapp_id_table,
+};
+
+static int __init smiapp_init(void)
+{
+	int rval;
+
+	rval = i2c_add_driver(&smiapp_i2c_driver);
+	if (rval)
+		pr_err("Failed registering driver" SMIAPP_NAME "\n");
+
+	return rval;
+}
+
+static void __exit smiapp_exit(void)
+{
+	i2c_del_driver(&smiapp_i2c_driver);
+}
+
+module_init(smiapp_init);
+module_exit(smiapp_exit);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
+MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp/smiapp-debug.h b/drivers/media/video/smiapp/smiapp-debug.h
new file mode 100644
index 0000000..627809e
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-debug.h
@@ -0,0 +1,32 @@
+/*
+ * drivers/media/video/smiapp/smiapp-debug.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_DEBUG_H
+#define SMIAPP_DEBUG_H
+
+#ifdef CONFIG_VIDEO_SMIAPP_DEBUG
+#define DEBUG
+#endif
+
+#endif
diff --git a/drivers/media/video/smiapp/smiapp-limits.c b/drivers/media/video/smiapp/smiapp-limits.c
new file mode 100644
index 0000000..0800e09
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-limits.c
@@ -0,0 +1,132 @@
+/*
+ * drivers/media/video/smiapp/smiapp-limits.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp.h"
+
+struct smiapp_reg_limits smiapp_reg_limits[] = {
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY, "analogue_gain_capability" }, /* 0 */
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN, "analogue_gain_code_min" },
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX, "analogue_gain_code_max" },
+	{ SMIAPP_REG_U8_THS_ZERO_MIN, "ths_zero_min" },
+	{ SMIAPP_REG_U8_TCLK_TRAIL_MIN, "tclk_trail_min" },
+	{ SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY, "integration_time_capability" }, /* 5 */
+	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN, "coarse_integration_time_min" },
+	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN, "coarse_integration_time_max_margin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN, "fine_integration_time_min" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN, "fine_integration_time_max_margin" },
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY, "digital_gain_capability" }, /* 10 */
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_MIN, "digital_gain_min" },
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_MAX, "digital_gain_max" },
+	{ SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ, "min_ext_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ, "max_ext_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV, "min_pre_pll_clk_div" }, /* 15 */
+	{ SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV, "max_pre_pll_clk_div" },
+	{ SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ, "min_pll_ip_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ, "max_pll_ip_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_PLL_MULTIPLIER, "min_pll_multiplier" },
+	{ SMIAPP_REG_U16_MAX_PLL_MULTIPLIER, "max_pll_multiplier" }, /* 20 */
+	{ SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ, "min_pll_op_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ, "max_pll_op_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV, "min_vt_sys_clk_div" },
+	{ SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV, "max_vt_sys_clk_div" },
+	{ SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ, "min_vt_sys_clk_freq_hz" }, /* 25 */
+	{ SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ, "max_vt_sys_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ, "min_vt_pix_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ, "max_vt_pix_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV, "min_vt_pix_clk_div" },
+	{ SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV, "max_vt_pix_clk_div" }, /* 30 */
+	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES, "min_frame_length_lines" },
+	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES, "max_frame_length_lines" },
+	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK, "min_line_length_pck" },
+	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK, "max_line_length_pck" },
+	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK, "min_line_blanking_pck" }, /* 35 */
+	{ SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES, "min_frame_blanking_lines" },
+	{ SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE, "min_line_length_pck_step_size" },
+	{ SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV, "min_op_sys_clk_div" },
+	{ SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV, "max_op_sys_clk_div" },
+	{ SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ, "min_op_sys_clk_freq_hz" }, /* 40 */
+	{ SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ, "max_op_sys_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV, "min_op_pix_clk_div" },
+	{ SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV, "max_op_pix_clk_div" },
+	{ SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ, "min_op_pix_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ, "max_op_pix_clk_freq_hz" }, /* 45 */
+	{ SMIAPP_REG_U16_X_ADDR_MIN, "x_addr_min" },
+	{ SMIAPP_REG_U16_Y_ADDR_MIN, "y_addr_min" },
+	{ SMIAPP_REG_U16_X_ADDR_MAX, "x_addr_max" },
+	{ SMIAPP_REG_U16_Y_ADDR_MAX, "y_addr_max" },
+	{ SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE, "min_x_output_size" }, /* 50 */
+	{ SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE, "min_y_output_size" },
+	{ SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE, "max_x_output_size" },
+	{ SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE, "max_y_output_size" },
+	{ SMIAPP_REG_U16_MIN_EVEN_INC, "min_even_inc" },
+	{ SMIAPP_REG_U16_MAX_EVEN_INC, "max_even_inc" }, /* 55 */
+	{ SMIAPP_REG_U16_MIN_ODD_INC, "min_odd_inc" },
+	{ SMIAPP_REG_U16_MAX_ODD_INC, "max_odd_inc" },
+	{ SMIAPP_REG_U16_SCALING_CAPABILITY, "scaling_capability" },
+	{ SMIAPP_REG_U16_SCALER_M_MIN, "scaler_m_min" },
+	{ SMIAPP_REG_U16_SCALER_M_MAX, "scaler_m_max" }, /* 60 */
+	{ SMIAPP_REG_U16_SCALER_N_MIN, "scaler_n_min" },
+	{ SMIAPP_REG_U16_SCALER_N_MAX, "scaler_n_max" },
+	{ SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY, "spatial_sampling_capability" },
+	{ SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY, "digital_crop_capability" },
+	{ SMIAPP_REG_U16_COMPRESSION_CAPABILITY, "compression_capability" }, /* 65 */
+	{ SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY, "fifo_support_capability" },
+	{ SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY, "dphy_ctrl_capability" },
+	{ SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY, "csi_lane_mode_capability" },
+	{ SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY, "csi_signalling_mode_capability" },
+	{ SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY, "fast_standby_capability" }, /* 70 */
+	{ SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY, "cci_address_control_capability" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS, "max_per_lane_bitrate_1_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS, "max_per_lane_bitrate_2_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS, "max_per_lane_bitrate_3_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS, "max_per_lane_bitrate_4_lane_mode_mbps" }, /* 75 */
+	{ SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY, "temp_sensor_capability" },
+	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN, "min_frame_length_lines_bin" },
+	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN, "max_frame_length_lines_bin" },
+	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN, "min_line_length_pck_bin" },
+	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN, "max_line_length_pck_bin" }, /* 80 */
+	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN, "min_line_blanking_pck_bin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN, "fine_integration_time_min_bin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, "fine_integration_time_max_margin_bin" },
+	{ SMIAPP_REG_U8_BINNING_CAPABILITY, "binning_capability" },
+	{ SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY, "binning_weighting_capability" }, /* 85 */
+	{ SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY, "data_transfer_if_capability" },
+	{ SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY, "shading_correction_capability" },
+	{ SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY, "green_imbalance_capability" },
+	{ SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY, "black_level_capability" },
+	{ SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY, "module_specific_correction_capability" }, /* 90 */
+	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY, "defect_correction_capability" },
+	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2, "defect_correction_capability_2" },
+	{ SMIAPP_REG_U8_EDOF_CAPABILITY, "edof_capability" },
+	{ SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY, "colour_feedback_capability" },
+	{ SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY, "estimation_mode_capability" }, /* 95 */
+	{ SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY, "estimation_zone_capability" },
+	{ SMIAPP_REG_U16_CAPABILITY_TRDY_MIN, "capability_trdy_min" },
+	{ SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, "flash_mode_capability" },
+	{ SMIAPP_REG_U8_ACTUATOR_CAPABILITY, "actuator_capability" },
+	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1, "bracketing_lut_capability_1" }, /* 100 */
+	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2, "bracketing_lut_capability_2" },
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP, "analogue_gain_code_step" },
+	{ 0, NULL },
+};
diff --git a/drivers/media/video/smiapp/smiapp-limits.h b/drivers/media/video/smiapp/smiapp-limits.h
new file mode 100644
index 0000000..7f4836bb
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-limits.h
@@ -0,0 +1,128 @@
+/*
+ * drivers/media/video/smiapp/smiapp-limits.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CAPABILITY			0
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN			1
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX			2
+#define SMIAPP_LIMIT_THS_ZERO_MIN				3
+#define SMIAPP_LIMIT_TCLK_TRAIL_MIN				4
+#define SMIAPP_LIMIT_INTEGRATION_TIME_CAPABILITY		5
+#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MIN		6
+#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN		7
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN			8
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN		9
+#define SMIAPP_LIMIT_DIGITAL_GAIN_CAPABILITY			10
+#define SMIAPP_LIMIT_DIGITAL_GAIN_MIN				11
+#define SMIAPP_LIMIT_DIGITAL_GAIN_MAX				12
+#define SMIAPP_LIMIT_MIN_EXT_CLK_FREQ_HZ			13
+#define SMIAPP_LIMIT_MAX_EXT_CLK_FREQ_HZ			14
+#define SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV			15
+#define SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV			16
+#define SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ				17
+#define SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ				18
+#define SMIAPP_LIMIT_MIN_PLL_MULTIPLIER				19
+#define SMIAPP_LIMIT_MAX_PLL_MULTIPLIER				20
+#define SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ				21
+#define SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ				22
+#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV				23
+#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV				24
+#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ			25
+#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ			26
+#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ			27
+#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ			28
+#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV				29
+#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV				30
+#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES			31
+#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES			32
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK			33
+#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK			34
+#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK			35
+#define SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES			36
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_STEP_SIZE		37
+#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV				38
+#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV				39
+#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ			40
+#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ			41
+#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV				42
+#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV				43
+#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ			44
+#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ			45
+#define SMIAPP_LIMIT_X_ADDR_MIN					46
+#define SMIAPP_LIMIT_Y_ADDR_MIN					47
+#define SMIAPP_LIMIT_X_ADDR_MAX					48
+#define SMIAPP_LIMIT_Y_ADDR_MAX					49
+#define SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE				50
+#define SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE				51
+#define SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE				52
+#define SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE				53
+#define SMIAPP_LIMIT_MIN_EVEN_INC				54
+#define SMIAPP_LIMIT_MAX_EVEN_INC				55
+#define SMIAPP_LIMIT_MIN_ODD_INC				56
+#define SMIAPP_LIMIT_MAX_ODD_INC				57
+#define SMIAPP_LIMIT_SCALING_CAPABILITY				58
+#define SMIAPP_LIMIT_SCALER_M_MIN				59
+#define SMIAPP_LIMIT_SCALER_M_MAX				60
+#define SMIAPP_LIMIT_SCALER_N_MIN				61
+#define SMIAPP_LIMIT_SCALER_N_MAX				62
+#define SMIAPP_LIMIT_SPATIAL_SAMPLING_CAPABILITY		63
+#define SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY			64
+#define SMIAPP_LIMIT_COMPRESSION_CAPABILITY			65
+#define SMIAPP_LIMIT_FIFO_SUPPORT_CAPABILITY			66
+#define SMIAPP_LIMIT_DPHY_CTRL_CAPABILITY			67
+#define SMIAPP_LIMIT_CSI_LANE_MODE_CAPABILITY			68
+#define SMIAPP_LIMIT_CSI_SIGNALLING_MODE_CAPABILITY		69
+#define SMIAPP_LIMIT_FAST_STANDBY_CAPABILITY			70
+#define SMIAPP_LIMIT_CCI_ADDRESS_CONTROL_CAPABILITY		71
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	72
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	73
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	74
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	75
+#define SMIAPP_LIMIT_TEMP_SENSOR_CAPABILITY			76
+#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN			77
+#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN			78
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN			79
+#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN			80
+#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN			81
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN		82
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	83
+#define SMIAPP_LIMIT_BINNING_CAPABILITY				84
+#define SMIAPP_LIMIT_BINNING_WEIGHTING_CAPABILITY		85
+#define SMIAPP_LIMIT_DATA_TRANSFER_IF_CAPABILITY		86
+#define SMIAPP_LIMIT_SHADING_CORRECTION_CAPABILITY		87
+#define SMIAPP_LIMIT_GREEN_IMBALANCE_CAPABILITY			88
+#define SMIAPP_LIMIT_BLACK_LEVEL_CAPABILITY			89
+#define SMIAPP_LIMIT_MODULE_SPECIFIC_CORRECTION_CAPABILITY	90
+#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY		91
+#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY_2		92
+#define SMIAPP_LIMIT_EDOF_CAPABILITY				93
+#define SMIAPP_LIMIT_COLOUR_FEEDBACK_CAPABILITY			94
+#define SMIAPP_LIMIT_ESTIMATION_MODE_CAPABILITY			95
+#define SMIAPP_LIMIT_ESTIMATION_ZONE_CAPABILITY			96
+#define SMIAPP_LIMIT_CAPABILITY_TRDY_MIN			97
+#define SMIAPP_LIMIT_FLASH_MODE_CAPABILITY			98
+#define SMIAPP_LIMIT_ACTUATOR_CAPABILITY			99
+#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_1		100
+#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_2		101
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP			102
+#define SMIAPP_LIMIT_LAST					103
diff --git a/drivers/media/video/smiapp/smiapp-quirk.c b/drivers/media/video/smiapp/smiapp-quirk.c
new file mode 100644
index 0000000..dae85a1
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-quirk.c
@@ -0,0 +1,264 @@
+/*
+ * drivers/media/video/smiapp/smiapp-quirk.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+
+#include "smiapp.h"
+
+static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	return smiapp_write(client, (SMIA_REG_8BIT << 16) | reg, val);
+}
+
+static int smiapp_write_8s(struct smiapp_sensor *sensor,
+			   struct smiapp_reg_8 *regs, int len)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	for (; len > 0; len--, regs++) {
+		rval = smiapp_write_8(sensor, regs->reg, regs->val);
+		if (rval < 0) {
+			dev_err(&client->dev,
+				"error %d writing reg 0x%4.4x, val 0x%2.2x",
+				rval, regs->reg, regs->val);
+			return rval;
+		}
+	}
+
+	return 0;
+}
+
+void smiapp_replace_limit(struct smiapp_sensor *sensor,
+			  u32 limit, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
+		smiapp_reg_limits[limit].addr,
+		smiapp_reg_limits[limit].what, val, val);
+	sensor->limits[limit] = val;
+}
+
+int smiapp_replace_limit_at(struct smiapp_sensor *sensor,
+			    u32 reg, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int i;
+
+	for (i = 0; smiapp_reg_limits[i].addr; i++) {
+		if ((smiapp_reg_limits[i].addr & 0xffff) != reg)
+			continue;
+
+		smiapp_replace_limit(sensor, i, val);
+
+		return 0;
+	}
+
+	dev_dbg(&client->dev, "quirk: bad register 0x%4.4x\n", reg);
+
+	return -EINVAL;
+}
+
+static int jt8ew9_limits(struct smiapp_sensor *sensor)
+{
+	if (sensor->minfo.revision_number_major < 0x03)
+		sensor->frame_skip = 1;
+
+	/* Below 24 gain doesn't have effect at all, */
+	/* but ~59 is needed for full dynamic range */
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
+	smiapp_replace_limit(
+		sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
+
+	return 0;
+}
+
+static int jt8ew9_post_poweron(struct smiapp_sensor *sensor)
+{
+	struct smiapp_reg_8 regs[] = {
+		{ 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */
+		{ 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
+		{ 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
+		{ 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */
+		{ 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		{ 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		{ 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		/* Taken from v03. No idea what the rest are. */
+		{ 0x32e0, 0x05 },
+		{ 0x32e1, 0x05 },
+		{ 0x32e2, 0x04 },
+		{ 0x32e5, 0x04 },
+		{ 0x32e6, 0x04 },
+
+	};
+
+	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+}
+
+const struct smiapp_quirk smiapp_jt8ew9_quirk = {
+	.limits = jt8ew9_limits,
+	.post_poweron = jt8ew9_post_poweron,
+};
+
+static int imx125es_post_poweron(struct smiapp_sensor *sensor)
+{
+	/* Taken from v02. No idea what the other two are. */
+	struct smiapp_reg_8 regs[] = {
+		/*
+		 * 0x3302: clk during frame blanking:
+		 * 0x00 - HS mode, 0x01 - LP11
+		 */
+		{ 0x3302, 0x01 },
+		{ 0x302d, 0x00 },
+		{ 0x3b08, 0x8c },
+	};
+
+	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+}
+
+const struct smiapp_quirk smiapp_imx125es_quirk = {
+	.post_poweron = imx125es_post_poweron,
+};
+
+static int jt8ev1_limits(struct smiapp_sensor *sensor)
+{
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
+	smiapp_replace_limit(sensor,
+			     SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
+
+	return 0;
+}
+
+static int jt8ev1_post_poweron(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	struct smiapp_reg_8 regs[] = {
+		{ 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */
+		{ 0x30a3, 0xd0 }, /* FLASH STROBE enable */
+		{ 0x3237, 0x00 }, /* For control of pulse timing for ADC */
+		{ 0x3238, 0x43 },
+		{ 0x3301, 0x06 }, /* For analog bias for sensor */
+		{ 0x3302, 0x06 },
+		{ 0x3304, 0x00 },
+		{ 0x3305, 0x88 },
+		{ 0x332a, 0x14 },
+		{ 0x332c, 0x6b },
+		{ 0x3336, 0x01 },
+		{ 0x333f, 0x1f },
+		{ 0x3355, 0x00 },
+		{ 0x3356, 0x20 },
+		{ 0x33bf, 0x20 }, /* Adjust the FBC speed */
+		{ 0x33c9, 0x20 },
+		{ 0x33ce, 0x30 }, /* Adjust the parameter for logic function */
+		{ 0x33cf, 0xec }, /* For Black sun */
+		{ 0x3328, 0x80 }, /* Ugh. No idea what's this. */
+	};
+
+	struct smiapp_reg_8 regs_96[] = {
+		{ 0x30ae, 0x00 }, /* For control of ADC clock */
+		{ 0x30af, 0xd0 },
+		{ 0x30b0, 0x01 },
+	};
+
+	rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+	if (rval < 0)
+		return rval;
+
+	switch (sensor->platform_data->ext_clk) {
+	case 9600000:
+		return smiapp_write_8s(sensor, regs_96,
+				       ARRAY_SIZE(regs_96));
+	default:
+		dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
+			 sensor->platform_data->ext_clk);
+		return 0;
+	}
+}
+
+static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor)
+{
+	return smiapp_write_8(sensor, 0x3328, 0x00);
+}
+
+static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
+{
+	int rval;
+
+	/* Workaround: allows fast standby to work properly */
+	rval = smiapp_write_8(sensor, 0x3205, 0x04);
+	if (rval < 0)
+		return rval;
+
+	/* Wait for 1 ms + one line => 2 ms is likely enough */
+	usleep_range(2000, 2000);
+
+	/* Restore it */
+	rval = smiapp_write_8(sensor, 0x3205, 0x00);
+	if (rval < 0)
+		return rval;
+
+	return smiapp_write_8(sensor, 0x3328, 0x80);
+}
+
+const struct smiapp_quirk smiapp_jt8ev1_quirk = {
+	.limits = jt8ev1_limits,
+	.post_poweron = jt8ev1_post_poweron,
+	.pre_streamon = jt8ev1_pre_streamon,
+	.post_streamoff = jt8ev1_post_streamoff,
+	.flags = SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE,
+};
+
+static int tcm8500md_limits(struct smiapp_sensor *sensor)
+{
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
+
+	return 0;
+}
+
+const struct smiapp_quirk smiapp_tcm8500md_quirk = {
+	.limits = tcm8500md_limits,
+};
diff --git a/drivers/media/video/smiapp/smiapp-quirk.h b/drivers/media/video/smiapp/smiapp-quirk.h
new file mode 100644
index 0000000..7a1b3a0
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-quirk.h
@@ -0,0 +1,72 @@
+/*
+ * drivers/media/video/smiapp/smiapp-quirk.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_QUIRK__
+#define __SMIAPP_QUIRK__
+
+struct smiapp_sensor;
+
+/**
+ * struct smiapp_quirk - quirks for sensors that deviate from SMIA++ standard
+ *
+ * @limits: Replace sensor->limits with values which can't be read from
+ *	    sensor registers. Called the first time the sensor is powered up.
+ * @post_poweron: Called always after the sensor has been fully powered on.
+ * @pre_streamon: Called just before streaming is enabled.
+ * @post_streamon: Called right after stopping streaming.
+ */
+struct smiapp_quirk {
+	int (*limits)(struct smiapp_sensor *sensor);
+	int (*post_poweron)(struct smiapp_sensor *sensor);
+	int (*pre_streamon)(struct smiapp_sensor *sensor);
+	int (*post_streamoff)(struct smiapp_sensor *sensor);
+	unsigned long flags;
+};
+
+/* op pix clock is for all lanes in total normally */
+#define SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
+
+struct smiapp_reg_8 {
+	u16 reg;
+	u8 val;
+};
+
+void smiapp_replace_limit(struct smiapp_sensor *sensor,
+			  u32 limit, u32 val);
+
+#define smiapp_call_quirk(_sensor, _quirk, ...)				\
+	(_sensor->minfo.quirk &&					\
+	 _sensor->minfo.quirk->_quirk ?					\
+	 _sensor->minfo.quirk->_quirk(_sensor, ##__VA_ARGS__) : 0)
+
+#define smiapp_needs_quirk(_sensor, _quirk)		\
+	(_sensor->minfo.quirk ?				\
+	 _sensor->minfo.quirk->flags & _quirk : 0)
+
+extern const struct smiapp_quirk smiapp_jt8ev1_quirk;
+extern const struct smiapp_quirk smiapp_imx125es_quirk;
+extern const struct smiapp_quirk smiapp_jt8ew9_quirk;
+extern const struct smiapp_quirk smiapp_tcm8500md_quirk;
+
+#endif /* __SMIAPP_QUIRK__ */
diff --git a/drivers/media/video/smiapp/smiapp-reg-defs.h b/drivers/media/video/smiapp/smiapp-reg-defs.h
new file mode 100644
index 0000000..8e291bf
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-reg-defs.h
@@ -0,0 +1,503 @@
+/*
+ * drivers/media/video/smiapp/smiapp-reg-defs.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#define SMIAPP_REG_MK_U8(r) ((SMIA_REG_8BIT << 16) | (r))
+#define SMIAPP_REG_MK_U16(r) ((SMIA_REG_16BIT << 16) | (r))
+#define SMIAPP_REG_MK_U32(r) ((SMIA_REG_32BIT << 16) | (r))
+
+#define SMIAPP_REG_MK_F32(r) (SMIA_REG_FLAG_FLOAT | (SMIA_REG_32BIT << 16) | (r))
+
+#define SMIAPP_REG_U16_MODEL_ID					SMIAPP_REG_MK_U16(0x0000)
+#define SMIAPP_REG_U8_REVISION_NUMBER_MAJOR			SMIAPP_REG_MK_U8(0x0002)
+#define SMIAPP_REG_U8_MANUFACTURER_ID				SMIAPP_REG_MK_U8(0x0003)
+#define SMIAPP_REG_U8_SMIA_VERSION				SMIAPP_REG_MK_U8(0x0004)
+#define SMIAPP_REG_U8_FRAME_COUNT				SMIAPP_REG_MK_U8(0x0005)
+#define SMIAPP_REG_U8_PIXEL_ORDER				SMIAPP_REG_MK_U8(0x0006)
+#define SMIAPP_REG_U16_DATA_PEDESTAL				SMIAPP_REG_MK_U16(0x0008)
+#define SMIAPP_REG_U8_PIXEL_DEPTH				SMIAPP_REG_MK_U8(0x000c)
+#define SMIAPP_REG_U8_REVISION_NUMBER_MINOR			SMIAPP_REG_MK_U8(0x0010)
+#define SMIAPP_REG_U8_SMIAPP_VERSION				SMIAPP_REG_MK_U8(0x0011)
+#define SMIAPP_REG_U8_MODULE_DATE_YEAR				SMIAPP_REG_MK_U8(0x0012)
+#define SMIAPP_REG_U8_MODULE_DATE_MONTH				SMIAPP_REG_MK_U8(0x0013)
+#define SMIAPP_REG_U8_MODULE_DATE_DAY				SMIAPP_REG_MK_U8(0x0014)
+#define SMIAPP_REG_U8_MODULE_DATE_PHASE				SMIAPP_REG_MK_U8(0x0015)
+#define SMIAPP_REG_U16_SENSOR_MODEL_ID				SMIAPP_REG_MK_U16(0x0016)
+#define SMIAPP_REG_U8_SENSOR_REVISION_NUMBER			SMIAPP_REG_MK_U8(0x0018)
+#define SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID			SMIAPP_REG_MK_U8(0x0019)
+#define SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION			SMIAPP_REG_MK_U8(0x001a)
+#define SMIAPP_REG_U32_SERIAL_NUMBER				SMIAPP_REG_MK_U32(0x001c)
+#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x0040)
+#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE		SMIAPP_REG_MK_U8(0x0041)
+#define SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(n)		SMIAPP_REG_MK_U16(0x0042 + ((n) << 1)) /* 0 <= n <= 14 */
+#define SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(n)		SMIAPP_REG_MK_U32(0x0060 + ((n) << 2)) /* 0 <= n <= 7 */
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x0080)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN			SMIAPP_REG_MK_U16(0x0084)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX			SMIAPP_REG_MK_U16(0x0086)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP			SMIAPP_REG_MK_U16(0x0088)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_TYPE			SMIAPP_REG_MK_U16(0x008a)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_M0				SMIAPP_REG_MK_U16(0x008c)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_C0				SMIAPP_REG_MK_U16(0x008e)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_M1				SMIAPP_REG_MK_U16(0x0090)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_C1				SMIAPP_REG_MK_U16(0x0092)
+#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x00c0)
+#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_SUBTYPE			SMIAPP_REG_MK_U8(0x00c1)
+#define SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(n)		SMIAPP_REG_MK_U16(0x00c2 + ((n) << 1))
+#define SMIAPP_REG_U8_MODE_SELECT				SMIAPP_REG_MK_U8(0x0100)
+#define SMIAPP_REG_U8_IMAGE_ORIENTATION				SMIAPP_REG_MK_U8(0x0101)
+#define SMIAPP_REG_U8_SOFTWARE_RESET				SMIAPP_REG_MK_U8(0x0103)
+#define SMIAPP_REG_U8_GROUPED_PARAMETER_HOLD			SMIAPP_REG_MK_U8(0x0104)
+#define SMIAPP_REG_U8_MASK_CORRUPTED_FRAMES			SMIAPP_REG_MK_U8(0x0105)
+#define SMIAPP_REG_U8_FAST_STANDBY_CTRL				SMIAPP_REG_MK_U8(0x0106)
+#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0107)
+#define SMIAPP_REG_U8_2ND_CCI_IF_CONTROL			SMIAPP_REG_MK_U8(0x0108)
+#define SMIAPP_REG_U8_2ND_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0109)
+#define SMIAPP_REG_U8_CSI_CHANNEL_IDENTIFIER			SMIAPP_REG_MK_U8(0x0110)
+#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE			SMIAPP_REG_MK_U8(0x0111)
+#define SMIAPP_REG_U16_CSI_DATA_FORMAT				SMIAPP_REG_MK_U16(0x0112)
+#define SMIAPP_REG_U8_CSI_LANE_MODE				SMIAPP_REG_MK_U8(0x0114)
+#define SMIAPP_REG_U8_CSI2_10_TO_8_DT				SMIAPP_REG_MK_U8(0x0115)
+#define SMIAPP_REG_U8_CSI2_10_TO_7_DT				SMIAPP_REG_MK_U8(0x0116)
+#define SMIAPP_REG_U8_CSI2_10_TO_6_DT				SMIAPP_REG_MK_U8(0x0117)
+#define SMIAPP_REG_U8_CSI2_12_TO_8_DT				SMIAPP_REG_MK_U8(0x0118)
+#define SMIAPP_REG_U8_CSI2_12_TO_7_DT				SMIAPP_REG_MK_U8(0x0119)
+#define SMIAPP_REG_U8_CSI2_12_TO_6_DT				SMIAPP_REG_MK_U8(0x011a)
+#define SMIAPP_REG_U8_CSI2_14_TO_10_DT				SMIAPP_REG_MK_U8(0x011b)
+#define SMIAPP_REG_U8_CSI2_14_TO_8_DT				SMIAPP_REG_MK_U8(0x011c)
+#define SMIAPP_REG_U8_CSI2_16_TO_10_DT				SMIAPP_REG_MK_U8(0x011d)
+#define SMIAPP_REG_U8_CSI2_16_TO_8_DT				SMIAPP_REG_MK_U8(0x011e)
+#define SMIAPP_REG_U8_GAIN_MODE					SMIAPP_REG_MK_U8(0x0120)
+#define SMIAPP_REG_U16_VANA_VOLTAGE				SMIAPP_REG_MK_U16(0x0130)
+#define SMIAPP_REG_U16_VDIG_VOLTAGE				SMIAPP_REG_MK_U16(0x0132)
+#define SMIAPP_REG_U16_VIO_VOLTAGE				SMIAPP_REG_MK_U16(0x0134)
+#define SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ			SMIAPP_REG_MK_U16(0x0136)
+#define SMIAPP_REG_U8_TEMP_SENSOR_CONTROL			SMIAPP_REG_MK_U8(0x0138)
+#define SMIAPP_REG_U8_TEMP_SENSOR_MODE				SMIAPP_REG_MK_U8(0x0139)
+#define SMIAPP_REG_U8_TEMP_SENSOR_OUTPUT			SMIAPP_REG_MK_U8(0x013a)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0200)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0202)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL		SMIAPP_REG_MK_U16(0x0204)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENR		SMIAPP_REG_MK_U16(0x0206)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_RED			SMIAPP_REG_MK_U16(0x0208)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_BLUE			SMIAPP_REG_MK_U16(0x020a)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENB		SMIAPP_REG_MK_U16(0x020c)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENR			SMIAPP_REG_MK_U16(0x020e)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_RED				SMIAPP_REG_MK_U16(0x0210)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0212)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0214)
+#define SMIAPP_REG_U16_VT_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0300)
+#define SMIAPP_REG_U16_VT_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x0302)
+#define SMIAPP_REG_U16_PRE_PLL_CLK_DIV				SMIAPP_REG_MK_U16(0x0304)
+#define SMIAPP_REG_U16_PLL_MULTIPLIER				SMIAPP_REG_MK_U16(0x0306)
+#define SMIAPP_REG_U16_OP_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0308)
+#define SMIAPP_REG_U16_OP_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x030a)
+#define SMIAPP_REG_U16_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x0340)
+#define SMIAPP_REG_U16_LINE_LENGTH_PCK				SMIAPP_REG_MK_U16(0x0342)
+#define SMIAPP_REG_U16_X_ADDR_START				SMIAPP_REG_MK_U16(0x0344)
+#define SMIAPP_REG_U16_Y_ADDR_START				SMIAPP_REG_MK_U16(0x0346)
+#define SMIAPP_REG_U16_X_ADDR_END				SMIAPP_REG_MK_U16(0x0348)
+#define SMIAPP_REG_U16_Y_ADDR_END				SMIAPP_REG_MK_U16(0x034a)
+#define SMIAPP_REG_U16_X_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034c)
+#define SMIAPP_REG_U16_Y_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034e)
+#define SMIAPP_REG_U16_X_EVEN_INC				SMIAPP_REG_MK_U16(0x0380)
+#define SMIAPP_REG_U16_X_ODD_INC				SMIAPP_REG_MK_U16(0x0382)
+#define SMIAPP_REG_U16_Y_EVEN_INC				SMIAPP_REG_MK_U16(0x0384)
+#define SMIAPP_REG_U16_Y_ODD_INC				SMIAPP_REG_MK_U16(0x0386)
+#define SMIAPP_REG_U16_SCALING_MODE				SMIAPP_REG_MK_U16(0x0400)
+#define SMIAPP_REG_U16_SPATIAL_SAMPLING				SMIAPP_REG_MK_U16(0x0402)
+#define SMIAPP_REG_U16_SCALE_M					SMIAPP_REG_MK_U16(0x0404)
+#define SMIAPP_REG_U16_SCALE_N					SMIAPP_REG_MK_U16(0x0406)
+#define SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET			SMIAPP_REG_MK_U16(0x0408)
+#define SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET			SMIAPP_REG_MK_U16(0x040a)
+#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH			SMIAPP_REG_MK_U16(0x040c)
+#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT		SMIAPP_REG_MK_U16(0x040e)
+#define SMIAPP_REG_U16_COMPRESSION_MODE				SMIAPP_REG_MK_U16(0x0500)
+#define SMIAPP_REG_U16_TEST_PATTERN_MODE			SMIAPP_REG_MK_U16(0x0600)
+#define SMIAPP_REG_U16_TEST_DATA_RED				SMIAPP_REG_MK_U16(0x0602)
+#define SMIAPP_REG_U16_TEST_DATA_GREENR				SMIAPP_REG_MK_U16(0x0604)
+#define SMIAPP_REG_U16_TEST_DATA_BLUE				SMIAPP_REG_MK_U16(0x0606)
+#define SMIAPP_REG_U16_TEST_DATA_GREENB				SMIAPP_REG_MK_U16(0x0608)
+#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060a)
+#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_POSITION		SMIAPP_REG_MK_U16(0x060c)
+#define SMIAPP_REG_U16_VERTICAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060e)
+#define SMIAPP_REG_U16_VERTICAL_CURSOR_POSITION			SMIAPP_REG_MK_U16(0x0610)
+#define SMIAPP_REG_U16_FIFO_WATER_MARK_PIXELS			SMIAPP_REG_MK_U16(0x0700)
+#define SMIAPP_REG_U8_TCLK_POST					SMIAPP_REG_MK_U8(0x0800)
+#define SMIAPP_REG_U8_THS_PREPARE				SMIAPP_REG_MK_U8(0x0801)
+#define SMIAPP_REG_U8_THS_ZERO_MIN				SMIAPP_REG_MK_U8(0x0802)
+#define SMIAPP_REG_U8_THS_TRAIL					SMIAPP_REG_MK_U8(0x0803)
+#define SMIAPP_REG_U8_TCLK_TRAIL_MIN				SMIAPP_REG_MK_U8(0x0804)
+#define SMIAPP_REG_U8_TCLK_PREPARE				SMIAPP_REG_MK_U8(0x0805)
+#define SMIAPP_REG_U8_TCLK_ZERO					SMIAPP_REG_MK_U8(0x0806)
+#define SMIAPP_REG_U8_TLPX					SMIAPP_REG_MK_U8(0x0807)
+#define SMIAPP_REG_U8_DPHY_CTRL					SMIAPP_REG_MK_U8(0x0808)
+#define SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS		SMIAPP_REG_MK_U32(0x0820)
+#define SMIAPP_REG_U8_BINNING_MODE				SMIAPP_REG_MK_U8(0x0900)
+#define SMIAPP_REG_U8_BINNING_TYPE				SMIAPP_REG_MK_U8(0x0901)
+#define SMIAPP_REG_U8_BINNING_WEIGHTING				SMIAPP_REG_MK_U8(0x0902)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL			SMIAPP_REG_MK_U8(0x0a00)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS			SMIAPP_REG_MK_U8(0x0a01)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a02)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0			SMIAPP_REG_MK_U8(0x0a04)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_1			SMIAPP_REG_MK_U8(0x0a05)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_2			SMIAPP_REG_MK_U8(0x0a06)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_3			SMIAPP_REG_MK_U8(0x0a07)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_4			SMIAPP_REG_MK_U8(0x0a08)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_5			SMIAPP_REG_MK_U8(0x0a09)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_12		SMIAPP_REG_MK_U8(0x0a10)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_13		SMIAPP_REG_MK_U8(0x0a11)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_14		SMIAPP_REG_MK_U8(0x0a12)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_15		SMIAPP_REG_MK_U8(0x0a13)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_16		SMIAPP_REG_MK_U8(0x0a14)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_17		SMIAPP_REG_MK_U8(0x0a15)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_18		SMIAPP_REG_MK_U8(0x0a16)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_19		SMIAPP_REG_MK_U8(0x0a17)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_20		SMIAPP_REG_MK_U8(0x0a18)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_21		SMIAPP_REG_MK_U8(0x0a19)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_22		SMIAPP_REG_MK_U8(0x0a1a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_23		SMIAPP_REG_MK_U8(0x0a1b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_24		SMIAPP_REG_MK_U8(0x0a1c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_25		SMIAPP_REG_MK_U8(0x0a1d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_26		SMIAPP_REG_MK_U8(0x0a1e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_27		SMIAPP_REG_MK_U8(0x0a1f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_28		SMIAPP_REG_MK_U8(0x0a20)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_29		SMIAPP_REG_MK_U8(0x0a21)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_30		SMIAPP_REG_MK_U8(0x0a22)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_31		SMIAPP_REG_MK_U8(0x0a23)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_32		SMIAPP_REG_MK_U8(0x0a24)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_33		SMIAPP_REG_MK_U8(0x0a25)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_34		SMIAPP_REG_MK_U8(0x0a26)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_35		SMIAPP_REG_MK_U8(0x0a27)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_36		SMIAPP_REG_MK_U8(0x0a28)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_37		SMIAPP_REG_MK_U8(0x0a29)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_38		SMIAPP_REG_MK_U8(0x0a2a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_39		SMIAPP_REG_MK_U8(0x0a2b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_40		SMIAPP_REG_MK_U8(0x0a2c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_41		SMIAPP_REG_MK_U8(0x0a2d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_42		SMIAPP_REG_MK_U8(0x0a2e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_43		SMIAPP_REG_MK_U8(0x0a2f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_44		SMIAPP_REG_MK_U8(0x0a30)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_45		SMIAPP_REG_MK_U8(0x0a31)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_46		SMIAPP_REG_MK_U8(0x0a32)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_47		SMIAPP_REG_MK_U8(0x0a33)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_48		SMIAPP_REG_MK_U8(0x0a34)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_49		SMIAPP_REG_MK_U8(0x0a35)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_50		SMIAPP_REG_MK_U8(0x0a36)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_51		SMIAPP_REG_MK_U8(0x0a37)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_52		SMIAPP_REG_MK_U8(0x0a38)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_53		SMIAPP_REG_MK_U8(0x0a39)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_54		SMIAPP_REG_MK_U8(0x0a3a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_55		SMIAPP_REG_MK_U8(0x0a3b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_56		SMIAPP_REG_MK_U8(0x0a3c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_57		SMIAPP_REG_MK_U8(0x0a3d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_58		SMIAPP_REG_MK_U8(0x0a3e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_59		SMIAPP_REG_MK_U8(0x0a3f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_60		SMIAPP_REG_MK_U8(0x0a40)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_61		SMIAPP_REG_MK_U8(0x0a41)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_62		SMIAPP_REG_MK_U8(0x0a42)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_63		SMIAPP_REG_MK_U8(0x0a43)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_CTRL			SMIAPP_REG_MK_U8(0x0a44)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_STATUS			SMIAPP_REG_MK_U8(0x0a45)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a46)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_0			SMIAPP_REG_MK_U8(0x0a48)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_1			SMIAPP_REG_MK_U8(0x0a49)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_2			SMIAPP_REG_MK_U8(0x0a4a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_3			SMIAPP_REG_MK_U8(0x0a4b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_4			SMIAPP_REG_MK_U8(0x0a4c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_5			SMIAPP_REG_MK_U8(0x0a4d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_6			SMIAPP_REG_MK_U8(0x0a4e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_7			SMIAPP_REG_MK_U8(0x0a4f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_8			SMIAPP_REG_MK_U8(0x0a50)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_9			SMIAPP_REG_MK_U8(0x0a51)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_10		SMIAPP_REG_MK_U8(0x0a52)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_11		SMIAPP_REG_MK_U8(0x0a53)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_12		SMIAPP_REG_MK_U8(0x0a54)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_13		SMIAPP_REG_MK_U8(0x0a55)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_14		SMIAPP_REG_MK_U8(0x0a56)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_15		SMIAPP_REG_MK_U8(0x0a57)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_16		SMIAPP_REG_MK_U8(0x0a58)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_17		SMIAPP_REG_MK_U8(0x0a59)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_18		SMIAPP_REG_MK_U8(0x0a5a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_19		SMIAPP_REG_MK_U8(0x0a5b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_20		SMIAPP_REG_MK_U8(0x0a5c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_21		SMIAPP_REG_MK_U8(0x0a5d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_22		SMIAPP_REG_MK_U8(0x0a5e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_23		SMIAPP_REG_MK_U8(0x0a5f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_24		SMIAPP_REG_MK_U8(0x0a60)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_25		SMIAPP_REG_MK_U8(0x0a61)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_26		SMIAPP_REG_MK_U8(0x0a62)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_27		SMIAPP_REG_MK_U8(0x0a63)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_28		SMIAPP_REG_MK_U8(0x0a64)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_29		SMIAPP_REG_MK_U8(0x0a65)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_30		SMIAPP_REG_MK_U8(0x0a66)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_31		SMIAPP_REG_MK_U8(0x0a67)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_32		SMIAPP_REG_MK_U8(0x0a68)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_33		SMIAPP_REG_MK_U8(0x0a69)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_34		SMIAPP_REG_MK_U8(0x0a6a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_35		SMIAPP_REG_MK_U8(0x0a6b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_36		SMIAPP_REG_MK_U8(0x0a6c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_37		SMIAPP_REG_MK_U8(0x0a6d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_38		SMIAPP_REG_MK_U8(0x0a6e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_39		SMIAPP_REG_MK_U8(0x0a6f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_40		SMIAPP_REG_MK_U8(0x0a70)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_41		SMIAPP_REG_MK_U8(0x0a71)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_42		SMIAPP_REG_MK_U8(0x0a72)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_43		SMIAPP_REG_MK_U8(0x0a73)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_44		SMIAPP_REG_MK_U8(0x0a74)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_45		SMIAPP_REG_MK_U8(0x0a75)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_46		SMIAPP_REG_MK_U8(0x0a76)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_47		SMIAPP_REG_MK_U8(0x0a77)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_48		SMIAPP_REG_MK_U8(0x0a78)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_49		SMIAPP_REG_MK_U8(0x0a79)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_50		SMIAPP_REG_MK_U8(0x0a7a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_51		SMIAPP_REG_MK_U8(0x0a7b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_52		SMIAPP_REG_MK_U8(0x0a7c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_53		SMIAPP_REG_MK_U8(0x0a7d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_54		SMIAPP_REG_MK_U8(0x0a7e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_55		SMIAPP_REG_MK_U8(0x0a7f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_56		SMIAPP_REG_MK_U8(0x0a80)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_57		SMIAPP_REG_MK_U8(0x0a81)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_58		SMIAPP_REG_MK_U8(0x0a82)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_59		SMIAPP_REG_MK_U8(0x0a83)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_60		SMIAPP_REG_MK_U8(0x0a84)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_61		SMIAPP_REG_MK_U8(0x0a85)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_62		SMIAPP_REG_MK_U8(0x0a86)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_63		SMIAPP_REG_MK_U8(0x0a87)
+#define SMIAPP_REG_U8_SHADING_CORRECTION_ENABLE			SMIAPP_REG_MK_U8(0x0b00)
+#define SMIAPP_REG_U8_LUMINANCE_CORRECTION_LEVEL		SMIAPP_REG_MK_U8(0x0b01)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_ENABLE		SMIAPP_REG_MK_U8(0x0b02)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_WEIGHT		SMIAPP_REG_MK_U8(0x0b03)
+#define SMIAPP_REG_U8_BLACK_LEVEL_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b04)
+#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b05)
+#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b06)
+#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b07)
+#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b08)
+#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b09)
+#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0a)
+#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b0b)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b0c)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_WEIGHT		SMIAPP_REG_MK_U8(0x0b0d)
+#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0e)
+#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b0f)
+#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b10)
+#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b11)
+#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b12)
+#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b13)
+#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b14)
+#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b15)
+#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b16)
+#define SMIAPP_REG_U8_EDOF_MODE					SMIAPP_REG_MK_U8(0x0b80)
+#define SMIAPP_REG_U8_SHARPNESS					SMIAPP_REG_MK_U8(0x0b83)
+#define SMIAPP_REG_U8_DENOISING					SMIAPP_REG_MK_U8(0x0b84)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC				SMIAPP_REG_MK_U8(0x0b85)
+#define SMIAPP_REG_U16_DEPTH_OF_FIELD				SMIAPP_REG_MK_U16(0x0b86)
+#define SMIAPP_REG_U16_FOCUS_DISTANCE				SMIAPP_REG_MK_U16(0x0b88)
+#define SMIAPP_REG_U8_ESTIMATION_MODE_CTRL			SMIAPP_REG_MK_U8(0x0b8a)
+#define SMIAPP_REG_U16_COLOUR_TEMPERATURE			SMIAPP_REG_MK_U16(0x0b8c)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENR			SMIAPP_REG_MK_U16(0x0b8e)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_RED			SMIAPP_REG_MK_U16(0x0b90)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0b92)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0b94)
+#define SMIAPP_REG_U8_ESTIMATION_ZONE_MODE			SMIAPP_REG_MK_U8(0x0bc0)
+#define SMIAPP_REG_U16_FIXED_ZONE_WEIGHTING			SMIAPP_REG_MK_U16(0x0bc2)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_X_START			SMIAPP_REG_MK_U16(0x0bc4)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_Y_START			SMIAPP_REG_MK_U16(0x0bc6)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_WIDTH			SMIAPP_REG_MK_U16(0x0bc8)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_HEIGHT			SMIAPP_REG_MK_U16(0x0bca)
+#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL1			SMIAPP_REG_MK_U8(0x0c00)
+#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL2			SMIAPP_REG_MK_U8(0x0c01)
+#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_1		SMIAPP_REG_MK_U8(0x0c02)
+#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_2		SMIAPP_REG_MK_U8(0x0c03)
+#define SMIAPP_REG_U16_TRDY_CTRL				SMIAPP_REG_MK_U16(0x0c04)
+#define SMIAPP_REG_U16_TRDOUT_CTRL				SMIAPP_REG_MK_U16(0x0c06)
+#define SMIAPP_REG_U16_TSHUTTER_STROBE_DELAY_CTRL		SMIAPP_REG_MK_U16(0x0c08)
+#define SMIAPP_REG_U16_TSHUTTER_STROBE_WIDTH_CTRL		SMIAPP_REG_MK_U16(0x0c0a)
+#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c0c)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c0e)
+#define SMIAPP_REG_U16_TGRST_INTERVAL_CTRL			SMIAPP_REG_MK_U16(0x0c10)
+#define SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT			SMIAPP_REG_MK_U8(0x0c12)
+#define SMIAPP_REG_U16_FLASH_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c14)
+#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL		SMIAPP_REG_MK_U16(0x0c16)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL		SMIAPP_REG_MK_U16(0x0c18)
+#define SMIAPP_REG_U8_FLASH_MODE_RS				SMIAPP_REG_MK_U8(0x0c1a)
+#define SMIAPP_REG_U8_FLASH_TRIGGER_RS				SMIAPP_REG_MK_U8(0x0c1b)
+#define SMIAPP_REG_U8_FLASH_STATUS				SMIAPP_REG_MK_U8(0x0c1c)
+#define SMIAPP_REG_U8_SA_STROBE_MODE				SMIAPP_REG_MK_U8(0x0c1d)
+#define SMIAPP_REG_U16_SA_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c1e)
+#define SMIAPP_REG_U16_TSA_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c20)
+#define SMIAPP_REG_U16_TSA_STROBE_WIDTH_CTRL			SMIAPP_REG_MK_U16(0x0c22)
+#define SMIAPP_REG_U8_SA_STROBE_TRIGGER				SMIAPP_REG_MK_U8(0x0c24)
+#define SMIAPP_REG_U8_SPECIAL_ACTUATOR_STATUS			SMIAPP_REG_MK_U8(0x0c25)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_RS_CTRL	SMIAPP_REG_MK_U16(0x0c26)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_RS_CTRL		SMIAPP_REG_MK_U16(0x0c28)
+#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_RS_CTRL		SMIAPP_REG_MK_U8(0x0c2a)
+#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_CTRL			SMIAPP_REG_MK_U8(0x0c2b)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c2c)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_CTRL		SMIAPP_REG_MK_U16(0x0c2e)
+#define SMIAPP_REG_U8_LOW_LEVEL_CTRL				SMIAPP_REG_MK_U8(0x0c80)
+#define SMIAPP_REG_U16_MAIN_TRIGGER_REF_POINT			SMIAPP_REG_MK_U16(0x0c82)
+#define SMIAPP_REG_U16_MAIN_TRIGGER_T3				SMIAPP_REG_MK_U16(0x0c84)
+#define SMIAPP_REG_U8_MAIN_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c86)
+#define SMIAPP_REG_U16_PHASE1_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c88)
+#define SMIAPP_REG_U8_PHASE1_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8a)
+#define SMIAPP_REG_U16_PHASE2_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c8c)
+#define SMIAPP_REG_U8_PHASE2_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8e)
+#define SMIAPP_REG_U8_MECH_SHUTTER_CTRL				SMIAPP_REG_MK_U8(0x0d00)
+#define SMIAPP_REG_U8_OPERATION_MODE				SMIAPP_REG_MK_U8(0x0d01)
+#define SMIAPP_REG_U8_ACT_STATE1				SMIAPP_REG_MK_U8(0x0d02)
+#define SMIAPP_REG_U8_ACT_STATE2				SMIAPP_REG_MK_U8(0x0d03)
+#define SMIAPP_REG_U16_FOCUS_CHANGE				SMIAPP_REG_MK_U16(0x0d80)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_CONTROL			SMIAPP_REG_MK_U16(0x0d82)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE1		SMIAPP_REG_MK_U16(0x0d84)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE2		SMIAPP_REG_MK_U16(0x0d86)
+#define SMIAPP_REG_U8_STROBE_COUNT_PHASE1			SMIAPP_REG_MK_U8(0x0d88)
+#define SMIAPP_REG_U8_STROBE_COUNT_PHASE2			SMIAPP_REG_MK_U8(0x0d89)
+#define SMIAPP_REG_U8_POSITION					SMIAPP_REG_MK_U8(0x0d8a)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CONTROL			SMIAPP_REG_MK_U8(0x0e00)
+#define SMIAPP_REG_U8_BRACKETING_LUT_MODE			SMIAPP_REG_MK_U8(0x0e01)
+#define SMIAPP_REG_U8_BRACKETING_LUT_ENTRY_CONTROL		SMIAPP_REG_MK_U8(0x0e02)
+#define SMIAPP_REG_U8_LUT_PARAMETERS_START			SMIAPP_REG_MK_U8(0x0e10)
+#define SMIAPP_REG_U8_LUT_PARAMETERS_END			SMIAPP_REG_MK_U8(0x0eff)
+#define SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY		SMIAPP_REG_MK_U16(0x1000)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1004)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN	SMIAPP_REG_MK_U16(0x1006)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1008)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN		SMIAPP_REG_MK_U16(0x100a)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x1080)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_MIN				SMIAPP_REG_MK_U16(0x1084)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_MAX				SMIAPP_REG_MK_U16(0x1086)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_STEP_SIZE			SMIAPP_REG_MK_U16(0x1088)
+#define SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1100)
+#define SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1104)
+#define SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x1108)
+#define SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x110a)
+#define SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x110c)
+#define SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1110)
+#define SMIAPP_REG_U16_MIN_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1114)
+#define SMIAPP_REG_U16_MAX_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1116)
+#define SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1118)
+#define SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x111c)
+#define SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1120)
+#define SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1122)
+#define SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1124)
+#define SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1128)
+#define SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x112c)
+#define SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1130)
+#define SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1134)
+#define SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1136)
+#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1140)
+#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1142)
+#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1144)
+#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1146)
+#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK			SMIAPP_REG_MK_U16(0x1148)
+#define SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES			SMIAPP_REG_MK_U16(0x114a)
+#define SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE		SMIAPP_REG_MK_U8(0x114c)
+#define SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1160)
+#define SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1162)
+#define SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1164)
+#define SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1168)
+#define SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116c)
+#define SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116e)
+#define SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1170)
+#define SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1174)
+#define SMIAPP_REG_U16_X_ADDR_MIN				SMIAPP_REG_MK_U16(0x1180)
+#define SMIAPP_REG_U16_Y_ADDR_MIN				SMIAPP_REG_MK_U16(0x1182)
+#define SMIAPP_REG_U16_X_ADDR_MAX				SMIAPP_REG_MK_U16(0x1184)
+#define SMIAPP_REG_U16_Y_ADDR_MAX				SMIAPP_REG_MK_U16(0x1186)
+#define SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x1188)
+#define SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118a)
+#define SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118c)
+#define SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118e)
+#define SMIAPP_REG_U16_MIN_EVEN_INC				SMIAPP_REG_MK_U16(0x11c0)
+#define SMIAPP_REG_U16_MAX_EVEN_INC				SMIAPP_REG_MK_U16(0x11c2)
+#define SMIAPP_REG_U16_MIN_ODD_INC				SMIAPP_REG_MK_U16(0x11c4)
+#define SMIAPP_REG_U16_MAX_ODD_INC				SMIAPP_REG_MK_U16(0x11c6)
+#define SMIAPP_REG_U16_SCALING_CAPABILITY			SMIAPP_REG_MK_U16(0x1200)
+#define SMIAPP_REG_U16_SCALER_M_MIN				SMIAPP_REG_MK_U16(0x1204)
+#define SMIAPP_REG_U16_SCALER_M_MAX				SMIAPP_REG_MK_U16(0x1206)
+#define SMIAPP_REG_U16_SCALER_N_MIN				SMIAPP_REG_MK_U16(0x1208)
+#define SMIAPP_REG_U16_SCALER_N_MAX				SMIAPP_REG_MK_U16(0x120a)
+#define SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY		SMIAPP_REG_MK_U16(0x120c)
+#define SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY			SMIAPP_REG_MK_U8(0x120e)
+#define SMIAPP_REG_U16_COMPRESSION_CAPABILITY			SMIAPP_REG_MK_U16(0x1300)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINRED			SMIAPP_REG_MK_U16(0x1400)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINRED		SMIAPP_REG_MK_U16(0x1402)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINRED			SMIAPP_REG_MK_U16(0x1404)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINGREEN		SMIAPP_REG_MK_U16(0x1406)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINGREEN		SMIAPP_REG_MK_U16(0x1408)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINGREEN		SMIAPP_REG_MK_U16(0x140a)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINBLUE			SMIAPP_REG_MK_U16(0x140c)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINBLUE		SMIAPP_REG_MK_U16(0x140e)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINBLUE		SMIAPP_REG_MK_U16(0x1410)
+#define SMIAPP_REG_U16_FIFO_SIZE_PIXELS				SMIAPP_REG_MK_U16(0x1500)
+#define SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY			SMIAPP_REG_MK_U8(0x1502)
+#define SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY			SMIAPP_REG_MK_U8(0x1600)
+#define SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1601)
+#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x1602)
+#define SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY			SMIAPP_REG_MK_U8(0x1603)
+#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY		SMIAPP_REG_MK_U8(0x1604)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1608)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x160c)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1610)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1614)
+#define SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1618)
+#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1700)
+#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1702)
+#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1704)
+#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1706)
+#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN		SMIAPP_REG_MK_U16(0x1708)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN		SMIAPP_REG_MK_U16(0x170a)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	SMIAPP_REG_MK_U16(0x170c)
+#define SMIAPP_REG_U8_BINNING_CAPABILITY			SMIAPP_REG_MK_U8(0x1710)
+#define SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY		SMIAPP_REG_MK_U8(0x1711)
+#define SMIAPP_REG_U8_BINNING_SUBTYPES				SMIAPP_REG_MK_U8(0x1712)
+#define SMIAPP_REG_U8_BINNING_TYPE_n(n)				SMIAPP_REG_MK_U8(0x1713) /* 1 <= n <= 237 */
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY		SMIAPP_REG_MK_U8(0x1800)
+#define SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U8(0x1900)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY		SMIAPP_REG_MK_U8(0x1901)
+#define SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY			SMIAPP_REG_MK_U8(0x1902)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY	SMIAPP_REG_MK_U8(0x1903)
+#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U16(0x1904)
+#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2		SMIAPP_REG_MK_U16(0x1906)
+#define SMIAPP_REG_U8_EDOF_CAPABILITY				SMIAPP_REG_MK_U8(0x1980)
+#define SMIAPP_REG_U8_ESTIMATION_FRAMES				SMIAPP_REG_MK_U8(0x1981)
+#define SMIAPP_REG_U8_SUPPORTS_SHARPNESS_ADJ			SMIAPP_REG_MK_U8(0x1982)
+#define SMIAPP_REG_U8_SUPPORTS_DENOISING_ADJ			SMIAPP_REG_MK_U8(0x1983)
+#define SMIAPP_REG_U8_SUPPORTS_MODULE_SPECIFIC_ADJ		SMIAPP_REG_MK_U8(0x1984)
+#define SMIAPP_REG_U8_SUPPORTS_DEPTH_OF_FIELD_ADJ		SMIAPP_REG_MK_U8(0x1985)
+#define SMIAPP_REG_U8_SUPPORTS_FOCUS_DISTANCE_ADJ		SMIAPP_REG_MK_U8(0x1986)
+#define SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY		SMIAPP_REG_MK_U8(0x1987)
+#define SMIAPP_REG_U8_EDOF_SUPPORT_AB_NXM			SMIAPP_REG_MK_U8(0x1988)
+#define SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c0)
+#define SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c1)
+#define SMIAPP_REG_U16_EST_DEPTH_OF_FIELD			SMIAPP_REG_MK_U16(0x19c2)
+#define SMIAPP_REG_U16_EST_FOCUS_DISTANCE			SMIAPP_REG_MK_U16(0x19c4)
+#define SMIAPP_REG_U16_CAPABILITY_TRDY_MIN			SMIAPP_REG_MK_U16(0x1a00)
+#define SMIAPP_REG_U8_FLASH_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1a02)
+#define SMIAPP_REG_U16_MECH_SHUT_AND_ACT_START_ADDR		SMIAPP_REG_MK_U16(0x1b02)
+#define SMIAPP_REG_U8_ACTUATOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1b04)
+#define SMIAPP_REG_U16_ACTUATOR_TYPE				SMIAPP_REG_MK_U16(0x1b40)
+#define SMIAPP_REG_U8_AF_DEVICE_ADDRESS				SMIAPP_REG_MK_U8(0x1b42)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_ADDRESS			SMIAPP_REG_MK_U16(0x1b44)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1		SMIAPP_REG_MK_U8(0x1c00)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2		SMIAPP_REG_MK_U8(0x1c01)
+#define SMIAPP_REG_U8_BRACKETING_LUT_SIZE			SMIAPP_REG_MK_U8(0x1c02)
diff --git a/drivers/media/video/smiapp/smiapp-reg.h b/drivers/media/video/smiapp/smiapp-reg.h
new file mode 100644
index 0000000..d0167aa
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-reg.h
@@ -0,0 +1,122 @@
+/*
+ * drivers/media/video/smiapp/smiapp-reg.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_REG_H_
+#define __SMIAPP_REG_H_
+
+#include "smiapp-reg-defs.h"
+
+/* Bits for above register */
+#define SMIAPP_IMAGE_ORIENTATION_HFLIP		(1 << 0)
+#define SMIAPP_IMAGE_ORIENTATION_VFLIP		(1 << 1)
+
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN		(1 << 0)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN		(0 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN		(1 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR	(1 << 2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY	(1 << 0)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY	(1 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA		(1 << 2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE		(1 << 3)
+
+#define SMIAPP_SOFTWARE_RESET				(1 << 0)
+
+#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE	(1 << 0)
+#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE	(1 << 1)
+
+#define SMIAPP_DPHY_CTRL_AUTOMATIC			0
+/* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */
+#define SMIAPP_DPHY_CTRL_UI				1
+#define SMIAPP_DPHY_CTRL_REGISTER			2
+
+#define SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR	1
+#define SMIAPP_COMPRESSION_MODE_ADVANCED_PREDICTOR	2
+
+#define SMIAPP_MODE_SELECT_SOFTWARE_STANDBY		0
+#define SMIAPP_MODE_SELECT_STREAMING			1
+
+#define SMIAPP_SCALING_MODE_NONE			0
+#define SMIAPP_SCALING_MODE_HORIZONTAL			1
+#define SMIAPP_SCALING_MODE_BOTH			2
+
+#define SMIAPP_SCALING_CAPABILITY_NONE			0
+#define SMIAPP_SCALING_CAPABILITY_HORIZONTAL		1
+#define SMIAPP_SCALING_CAPABILITY_BOTH			2 /* horizontal/both */
+
+/* digital crop right before scaler */
+#define SMIAPP_DIGITAL_CROP_CAPABILITY_NONE		0
+#define SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP	1
+
+#define SMIAPP_BINNING_CAPABILITY_NO			0
+#define SMIAPP_BINNING_CAPABILITY_YES			1
+
+/* Maximum number of binning subtypes */
+#define SMIAPP_BINNING_SUBTYPES				253
+
+#define SMIAPP_PIXEL_ORDER_GRBG				0
+#define SMIAPP_PIXEL_ORDER_RGGB				1
+#define SMIAPP_PIXEL_ORDER_BGGR				2
+#define SMIAPP_PIXEL_ORDER_GBRG				3
+
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL		1
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED		2
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N		8
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N	16
+
+#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE		0x01
+#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE		0x02
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK	0x0f
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK	0xf0
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT	4
+
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK	0xf000
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT	12
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK		0x0fff
+
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK	0xf0000000
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT	28
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK		0x0000ffff
+
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED	1
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY	2
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK	3
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK		4
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE	5
+
+#define SMIAPP_FAST_STANDBY_CTRL_COMPLETE_FRAMES	0
+#define SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE		1
+
+/* Scaling N factor */
+#define SMIAPP_SCALE_N					16
+
+/* Image statistics registers */
+/* Registers 0x2000 to 0x2fff are reserved for future
+ * use for statistics features.
+ */
+
+/* Manufacturer Specific Registers: 0x3000 to 0x3fff
+ * The manufacturer specifies these as a black box.
+ */
+
+#endif /* __SMIAPP_REG_H_ */
diff --git a/drivers/media/video/smiapp/smiapp-regs.c b/drivers/media/video/smiapp/smiapp-regs.c
new file mode 100644
index 0000000..4851ff7
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-regs.c
@@ -0,0 +1,213 @@
+/*
+ * drivers/media/video/smiapp/smiapp-regs.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+
+#include "smiapp-regs.h"
+
+static uint32_t float_to_u32_mul_1000000(struct i2c_client *client,
+					 uint32_t phloat)
+{
+	int32_t exp;
+	uint64_t man;
+
+	if (phloat >= 0x80000000) {
+		dev_err(&client->dev, "this is a negative number\n");
+		return 0;
+	}
+
+	if (phloat == 0x7f800000)
+		return ~0; /* Inf. */
+
+	if ((phloat & 0x7f800000) == 0x7f800000) {
+		dev_err(&client->dev, "NaN or other special number\n");
+		return 0;
+	}
+
+	/* Valid cases begin here */
+	if (phloat == 0)
+		return 0; /* Valid zero */
+
+	if (phloat > 0x4f800000)
+		return ~0; /* larger than 4294967295 */
+
+	/*
+	 * Unbias exponent (note how phloat is now guaranteed to
+	 * have 0 in the high bit)
+	 */
+	exp = ((int32_t)phloat >> 23) - 127;
+
+	/* Extract mantissa, add missing '1' bit and it's in MHz */
+	man = ((phloat & 0x7fffff) | 0x800000) * 1000000ULL;
+
+	if (exp < 0)
+		man >>= -exp;
+	else
+		man <<= exp;
+
+	man >>= 23; /* Remove mantissa bias */
+
+	return man & 0xffffffff;
+}
+
+
+/*
+ * Read a 8/16/32-bit i2c register.  The value is returned in 'val'.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+int smiapp_read(struct i2c_client *client, u32 reg, u32 *val)
+{
+	struct i2c_msg msg;
+	unsigned char data[4];
+	unsigned int len = (u8)(reg >> 16);
+	u16 offset = reg;
+	int r;
+
+	if (len != SMIA_REG_8BIT && len != SMIA_REG_16BIT
+	    && len != SMIA_REG_32BIT)
+		return -EINVAL;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = data;
+
+	/* high byte goes out first */
+	data[0] = (u8) (offset >> 8);
+	data[1] = (u8) offset;
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		if (r >= 0)
+			r = -EBUSY;
+		goto err;
+	}
+
+	msg.len = len;
+	msg.flags = I2C_M_RD;
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		if (r >= 0)
+			r = -EBUSY;
+		goto err;
+	}
+
+	*val = 0;
+	/* high byte comes first */
+	switch (len) {
+	case SMIA_REG_32BIT:
+		*val = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) +
+			data[3];
+		break;
+	case SMIA_REG_16BIT:
+		*val = (data[0] << 8) + data[1];
+		break;
+	case SMIA_REG_8BIT:
+		*val = data[0];
+		break;
+	default:
+		BUG();
+	}
+
+	if (reg & SMIA_REG_FLAG_FLOAT)
+		*val = float_to_u32_mul_1000000(client, *val);
+
+	return 0;
+
+err:
+	dev_err(&client->dev, "read from offset 0x%x error %d\n", offset, r);
+
+	return r;
+}
+
+/*
+ * Write to a 8/16-bit register.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+int smiapp_write(struct i2c_client *client, u32 reg, u32 val)
+{
+	struct i2c_msg msg;
+	unsigned char data[6];
+	unsigned int retries;
+	unsigned int flags = reg >> 24;
+	unsigned int len = (u8)(reg >> 16);
+	u16 offset = reg;
+	int r;
+
+	if ((len != SMIA_REG_8BIT && len != SMIA_REG_16BIT &&
+	     len != SMIA_REG_32BIT) || flags)
+		return -EINVAL;
+
+	msg.addr = client->addr;
+	msg.flags = 0; /* Write */
+	msg.len = 2 + len;
+	msg.buf = data;
+
+	/* high byte goes out first */
+	data[0] = (u8) (reg >> 8);
+	data[1] = (u8) (reg & 0xff);
+
+	switch (len) {
+	case SMIA_REG_8BIT:
+		data[2] = val;
+		break;
+	case SMIA_REG_16BIT:
+		data[2] = val >> 8;
+		data[3] = val;
+		break;
+	case SMIA_REG_32BIT:
+		data[2] = val >> 24;
+		data[3] = val >> 16;
+		data[4] = val >> 8;
+		data[5] = val;
+		break;
+	default:
+		BUG();
+	}
+
+	for (retries = 0; retries < 5; retries++) {
+		/*
+		 * Due to unknown reason sensor stops responding. This
+		 * loop is a temporaty solution until the root cause
+		 * is found.
+		 */
+		r = i2c_transfer(client->adapter, &msg, 1);
+		if (r == 1) {
+			if (retries)
+				dev_err(&client->dev,
+					"sensor i2c stall encountered. "
+					"retries: %d\n", retries);
+			return 0;
+		}
+
+		usleep_range(2000, 2000);
+	}
+
+	dev_err(&client->dev,
+		"wrote 0x%x to offset 0x%x error %d\n", val, offset, r);
+
+	return r;
+}
diff --git a/drivers/media/video/smiapp/smiapp-regs.h b/drivers/media/video/smiapp/smiapp-regs.h
new file mode 100644
index 0000000..58e8009
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-regs.h
@@ -0,0 +1,46 @@
+/*
+ * include/media/smiapp/smiapp-regs.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_REGS_H
+#define SMIAPP_REGS_H
+
+#include <linux/i2c.h>
+#include <linux/types.h>
+
+/* Use upper 8 bits of the type field for flags */
+#define SMIA_REG_FLAG_FLOAT		(1 << 24)
+
+#define SMIA_REG_8BIT			1
+#define SMIA_REG_16BIT			2
+#define SMIA_REG_32BIT			4
+struct smia_reg {
+	u16 type;
+	u16 reg;			/* 16-bit offset */
+	u32 val;			/* 8/16/32-bit value */
+};
+
+int smiapp_read(struct i2c_client *client, u32 reg, u32 *val);
+int smiapp_write(struct i2c_client *client, u32 reg, u32 val);
+
+#endif
diff --git a/drivers/media/video/smiapp/smiapp.h b/drivers/media/video/smiapp/smiapp.h
new file mode 100644
index 0000000..a38022f
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp.h
@@ -0,0 +1,251 @@
+/*
+ * drivers/media/video/smiapp/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_PRIV_H_
+#define __SMIAPP_PRIV_H_
+
+#include <linux/mutex.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+#include <media/smiapp.h>
+
+#include "../smiapp-pll.h"
+#include "smiapp-reg.h"
+#include "smiapp-regs.h"
+#include "smiapp-quirk.h"
+
+/*
+ * Standard SMIA++ constants
+ */
+#define SMIA_VERSION_1			10
+#define SMIAPP_VERSION_0_8		8 /* Draft 0.8 */
+#define SMIAPP_VERSION_0_9		9 /* Draft 0.9 */
+#define SMIAPP_VERSION_1		10
+
+#define SMIAPP_PROFILE_0		0
+#define SMIAPP_PROFILE_1		1
+#define SMIAPP_PROFILE_2		2
+
+#define SMIAPP_NVM_PAGE_SIZE		64	/* bytes */
+
+#define SMIAPP_RESET_DELAY_CLOCKS	2400
+#define SMIAPP_RESET_DELAY(clk)				\
+	(1000 +	(SMIAPP_RESET_DELAY_CLOCKS * 1000	\
+		 + (clk) / 1000 - 1) / ((clk) / 1000))
+
+#include "smiapp-limits.h"
+
+struct smiapp_quirk;
+
+#define SMIAPP_MODULE_IDENT_FLAG_REV_LE		(1 << 0)
+
+struct smiapp_module_ident {
+	u8 manufacturer_id;
+	u16 model_id;
+	u8 revision_number_major;
+
+	u8 flags;
+
+	char *name;
+	const struct smiapp_quirk *quirk;
+};
+
+struct smiapp_module_info {
+	u32 manufacturer_id;
+	u32 model_id;
+	u32 revision_number_major;
+	u32 revision_number_minor;
+
+	u32 module_year;
+	u32 module_month;
+	u32 module_day;
+
+	u32 sensor_manufacturer_id;
+	u32 sensor_model_id;
+	u32 sensor_revision_number;
+	u32 sensor_firmware_version;
+
+	u32 smia_version;
+	u32 smiapp_version;
+
+	u32 smiapp_profile;
+
+	char *name;
+	const struct smiapp_quirk *quirk;
+};
+
+#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk)	\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = fl,							\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk)	\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT_L(manufacturer, model, rev, _name)			\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
+	  .name = _name, }
+
+#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk)		\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = 0,							\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT(manufacturer, model, rev, _name)			\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = 0,							\
+	  .name = _name, }
+
+struct smiapp_reg_limits {
+	u32 addr;
+	char *what;
+};
+
+extern struct smiapp_reg_limits smiapp_reg_limits[];
+
+struct smiapp_csi_data_format {
+	u32 code;
+	u8 width;
+	u8 compressed;
+	u8 pixel_order;
+};
+
+#define SMIAPP_SUBDEVS			3
+
+#define SMIAPP_PA_PAD_SRC		0
+#define SMIAPP_PAD_SINK			0
+#define SMIAPP_PAD_SRC			1
+#define SMIAPP_PADS			2
+
+struct smiapp_binning_subtype {
+	u8 horizontal:4;
+	u8 vertical:4;
+} __packed;
+
+struct smiapp_subdev {
+	struct v4l2_subdev sd;
+	struct media_pad pads[2];
+	struct v4l2_rect sink_fmt;
+	struct v4l2_rect crop[2];
+	struct v4l2_rect compose; /* compose on sink */
+	unsigned short sink_pad;
+	unsigned short source_pad;
+	int npads;
+	struct smiapp_sensor *sensor;
+	struct v4l2_ctrl_handler ctrl_handler;
+};
+
+/*
+ * struct smiapp_sensor - Main device structure
+ */
+struct smiapp_sensor {
+	/*
+	 * "mutex" is used to serialise access to all fields here
+	 * except v4l2_ctrls at the end of the struct. "mutex" is also
+	 * used to serialise access to file handle specific
+	 * information. The exception to this rule is the power_mutex
+	 * below.
+	 */
+	struct mutex mutex;
+	/*
+	 * power_mutex is used to serialise power management related
+	 * activities. Acquiring "mutex" at that time isn't necessary
+	 * since there are no other users anyway.
+	 */
+	struct mutex power_mutex;
+	struct smiapp_subdev ssds[SMIAPP_SUBDEVS];
+	u32 ssds_used;
+	struct smiapp_subdev *src;
+	struct smiapp_subdev *binner;
+	struct smiapp_subdev *scaler;
+	struct smiapp_subdev *pixel_array;
+	struct smiapp_platform_data *platform_data;
+	struct regulator *vana;
+	u32 limits[SMIAPP_LIMIT_LAST];
+	u8 nbinning_subtypes;
+	struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES];
+	u32 mbus_frame_fmts;
+	const struct smiapp_csi_data_format *csi_format;
+	const struct smiapp_csi_data_format *internal_csi_format;
+	u32 default_mbus_frame_fmts;
+	int default_pixel_order;
+
+	u8 binning_horizontal;
+	u8 binning_vertical;
+
+	u8 scale_m;
+	u8 scaling_mode;
+
+	u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */
+	u8 flash_capability;
+	u8 frame_skip;
+
+	int power_count;
+
+	unsigned int streaming:1;
+	unsigned int dev_init_done:1;
+
+	u8 *nvm;		/* nvm memory buffer */
+	unsigned int nvm_size;	/* bytes */
+
+	struct smiapp_module_info minfo;
+
+	struct smiapp_pll pll;
+
+	/* Pixel array controls */
+	struct v4l2_ctrl *analog_gain;
+	struct v4l2_ctrl *exposure;
+	struct v4l2_ctrl *hflip;
+	struct v4l2_ctrl *vflip;
+	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *pixel_rate_parray;
+	/* src controls */
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *pixel_rate_csi;
+};
+
+#define to_smiapp_subdev(_sd)				\
+	container_of(_sd, struct smiapp_subdev, sd)
+
+#define to_smiapp_sensor(_sd)	\
+	(to_smiapp_subdev(_sd)->sensor)
+
+#endif /* __SMIAPP_PRIV_H_ */
diff --git a/include/media/smiapp.h b/include/media/smiapp.h
new file mode 100644
index 0000000..a7877cd
--- /dev/null
+++ b/include/media/smiapp.h
@@ -0,0 +1,83 @@
+/*
+ * include/media/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_H_
+#define __SMIAPP_H_
+
+#include <media/v4l2-subdev.h>
+
+#define SMIAPP_NAME		"smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR	(0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR	(0x6e >> 1) /* Alternate I2C Address */
+
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK	0
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE	1
+#define SMIAPP_CSI_SIGNALLING_MODE_CSI2			2
+
+#define SMIAPP_NO_XSHUTDOWN	-1
+
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+	SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+	SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+	u8 mode;
+	u32 strobe_width_high_us;
+	u16 strobe_delay;
+	u16 stobe_start_point;
+	u8 trigger;
+};
+
+struct smiapp_platform_data {
+	/*
+	 * Change the cci address if i2c_addr_alt is set.
+	 * Both default and alternate cci addr need to be present
+	 */
+	unsigned short i2c_addr_dfl;	/* Default i2c addr */
+	unsigned short i2c_addr_alt;	/* Alternate i2c addr */
+
+	unsigned int nvm_size;			/* bytes */
+	unsigned int ext_clk;			/* sensor external clk */
+
+	unsigned int lanes;		/* Number of CSI-2 lanes */
+	u8 csi_signalling_mode;		/* SMIAPP_CSI_SIGNALLING_MODE_* */
+	const s64 *op_sys_clock;
+
+	enum smiapp_module_board_orient module_board_orient;
+
+	struct smiapp_flash_strobe_parms *strobe_setup;
+
+	int (*set_xclk)(struct v4l2_subdev *sd, int hz);
+	int xshutdown;			/* gpio or SMIAPP_NO_XSHUTDOWN */
+};
+
+#endif /* __SMIAPP_H_  */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 34/35] smiapp: Generic SMIA++/SMIA PLL calculator
  2012-03-06 16:33 ` [PATCH v5 34/35] smiapp: Generic SMIA++/SMIA PLL calculator Sakari Ailus
@ 2012-03-07 12:26   ` Laurent Pinchart
  2012-03-08 13:29     ` Sakari Ailus
                       ` (2 more replies)
  0 siblings, 3 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-07 12:26 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Tuesday 06 March 2012 18:33:15 Sakari Ailus wrote:
> From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> 
> Calculate PLL configuration based on input data: sensor configuration, board
> properties and sensor-specific limits.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

[snip]

> diff --git a/drivers/media/video/smiapp-pll.c
> b/drivers/media/video/smiapp-pll.c new file mode 100644
> index 0000000..3a999c0
> --- /dev/null
> +++ b/drivers/media/video/smiapp-pll.c

[snip]

> +int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits
> *limits,
> +			 struct smiapp_pll *pll)
> +{

[snip]

> +	/*
> +	 * Some sensors perform analogue binning and some do this
> +	 * digitally. The ones doing this digitally can be roughly be
> +	 * found out using this formula. The ones doing this digitally
> +	 * should run at higher clock rate, so smaller divisor is used
> +	 * on video timing side.
> +	 */
> +	if (limits->min_line_length_pck_bin > limits->min_line_length_pck
> +	    / pll->binning_horizontal)
> +		vt_op_binning_div = pll->binning_horizontal;
> +	else
> +		vt_op_binning_div = 1;
> +	dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div);
> +
> +	/*
> +	 * Profile 2 supports vt_pix_clk_div E [4, 10]
> +	 *
> +	 * Horizontal binning can be used as a base for difference in
> +	 * divisors. One must make sure that horizontal blanking is
> +	 * enough to accommodate the CSI-2 sync codes.
> +	 *
> +	 * Take scaling factor into account as well.
> +	 *
> +	 * Find absolute limits for the factor of vt divider.
> +	 */
> +	dev_dbg(dev, "scale_m: %d\n", pll->scale_m);
> +	min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
> +				  * pll->scale_n,

I still need

        if (pll->flags & SMIAPP_PLL_FLAG_DUAL_READOUT)
               num_readout_paths = 2;
        else
               num_readout_paths = 1;
        min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
                                 * pll->scale_n * num_readout_paths,

for the AR0330 driver, but I can add that later.

> +				  lane_op_clock_ratio * vt_op_binning_div
> +				  * pll->scale_m);

[snip]

> +	/*
> +	 * Find pix_div such that a legal pix_div * sys_div results
> +	 * into a value which is not smaller than div, the desired
> +	 * divisor.
> +	 */
> +	for (vt_div = min_vt_div; vt_div <= max_vt_div;
> +	     vt_div += 2 - (vt_div & 1)) {
> +		for (sys_div = min_sys_div;
> +		     sys_div <= max_sys_div;
> +		     sys_div += 2 - (sys_div & 1)) {
> +			int pix_div = DIV_ROUND_UP(vt_div, sys_div);
> +
> +			if (pix_div <
> +			    limits->min_vt_pix_clk_div
> +			    || pix_div
> +			    > limits->max_vt_pix_clk_div) {

			if (pix_div < limits->min_vt_pix_clk_div ||
			    pix_div > limits->max_vt_pix_clk_div) {

> +				dev_dbg(dev,
> +					"pix_div %d too small or too big (%d--%d)\n",
> +					pix_div,
> +					limits->min_vt_pix_clk_div,
> +					limits->max_vt_pix_clk_div);
> +				continue;
> +			}
> +
> +			/* Check if this one is better. */
> +			if (pix_div * sys_div
> +			    <= ALIGN(min_vt_div, best_pix_div))
> +				best_pix_div = pix_div;
> +		}
> +		if (best_pix_div < INT_MAX >> 1)
> +			break;
> +	}

[snip]

> diff --git a/drivers/media/video/smiapp/smiapp-core.c
> b/drivers/media/video/smiapp/smiapp-core.c new file mode 100644
> index 0000000..879fb1e
> --- /dev/null
> +++ b/drivers/media/video/smiapp/smiapp-core.c

[snip]

> +static void smiapp_get_crop_compose(struct v4l2_subdev *subdev,
> +				    struct v4l2_subdev_fh *fh,
> +				    struct v4l2_rect **crops,
> +				    struct v4l2_rect **comps, int which)
> +{
> +	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
> +	int i;

Can you guess ? :-)

> +
> +	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> +		if (crops)
> +			for (i = 0; i < subdev->entity.num_pads; i++)
> +				crops[i] = &ssd->crop[i];
> +		if (comps)
> +			*comps = &ssd->compose;
> +	} else {
> +		if (crops) {
> +			for (i = 0; i < subdev->entity.num_pads; i++) {
> +				crops[i] = v4l2_subdev_get_try_crop(fh, i);
> +				BUG_ON(!crops[i]);
> +			}
> +		}
> +		if (comps) {
> +			*comps = v4l2_subdev_get_try_compose(fh,
> +							     SMIAPP_PAD_SINK);
> +			BUG_ON(!*comps);
> +		}
> +	}
> +}

[snip]

> +static int smiapp_set_format(struct v4l2_subdev *subdev,
> +			     struct v4l2_subdev_fh *fh,
> +			     struct v4l2_subdev_format *fmt)
> +{
> +	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
> +	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
> +	struct v4l2_rect *crops[SMIAPP_PADS];
> +	const struct smiapp_csi_data_format *csi_format = sensor->csi_format;
> +	int i;

:-D

> +
> +	mutex_lock(&sensor->mutex);
> +
> +	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
> +
> +	if (subdev == &sensor->src->sd && fmt->pad == SMIAPP_PAD_SRC) {
> +		for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
> +			if (sensor->mbus_frame_fmts & (1 << i) &&
> +			    smiapp_csi_data_formats[i].code
> +			    == fmt->format.code) {
> +				csi_format = &smiapp_csi_data_formats[i];
> +				if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +					sensor->csi_format = csi_format;
> +				break;
> +			}
> +		}
> +	}
> +
> +	if (fmt->pad == ssd->source_pad) {
> +		int rval;
> +
> +		rval = __smiapp_get_format(subdev, fh, fmt);
> +		fmt->format.code = csi_format->code;
> +
> +		mutex_unlock(&sensor->mutex);
> +		return rval;
> +	}
> +
> +	fmt->format.code = csi_format->code;

This will result in the format code at the output of the pixel array being
equal to the format code at the output of the binner/scaler. I don't think
you want that.

You probably need to take a small step back and rethink the code flow in this
function a bit. I'm pretty sure you can keep it simple.

> +	fmt->format.width &= ~1;
> +	fmt->format.height &= ~1;
> +
> +	fmt->format.width =
> +		clamp(fmt->format.width,
> +		      sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
> +		      sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
> +	fmt->format.height =
> +		clamp(fmt->format.height,
> +		      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
> +		      sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
> +
> +	crops[ssd->sink_pad]->left = 0;
> +	crops[ssd->sink_pad]->top = 0;
> +	crops[ssd->sink_pad]->width = fmt->format.width;
> +	crops[ssd->sink_pad]->height = fmt->format.height;
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +		ssd->sink_fmt = *crops[ssd->sink_pad];
> +	smiapp_propagate(subdev, fh, fmt->which,
> +			 V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE);
> +
> +	mutex_unlock(&sensor->mutex);
> +
> +	return 0;
> +}

[snip]

-- 
Regards,

Laurent Pinchart



^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5 34/35] smiapp: Generic SMIA++/SMIA PLL calculator
  2012-03-07 12:26   ` Laurent Pinchart
@ 2012-03-08 13:29     ` Sakari Ailus
  2012-03-08 13:57     ` [PATCH v5.1 " Sakari Ailus
  2012-03-08 13:57     ` [PATCH v5.1 35/35] smiapp: Add driver Sakari Ailus
  2 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-08 13:29 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

On Wed, Mar 07, 2012 at 01:26:20PM +0100, Laurent Pinchart wrote:
> Thanks for the patch.

Thanks for the comments!

> On Tuesday 06 March 2012 18:33:15 Sakari Ailus wrote:
> > From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> > 
> > Calculate PLL configuration based on input data: sensor configuration, board
> > properties and sensor-specific limits.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> 
> [snip]
> 
> > diff --git a/drivers/media/video/smiapp-pll.c
> > b/drivers/media/video/smiapp-pll.c new file mode 100644
> > index 0000000..3a999c0
> > --- /dev/null
> > +++ b/drivers/media/video/smiapp-pll.c
> 
> [snip]
> 
> > +int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits
> > *limits,
> > +			 struct smiapp_pll *pll)
> > +{
> 
> [snip]
> 
> > +	/*
> > +	 * Some sensors perform analogue binning and some do this
> > +	 * digitally. The ones doing this digitally can be roughly be
> > +	 * found out using this formula. The ones doing this digitally
> > +	 * should run at higher clock rate, so smaller divisor is used
> > +	 * on video timing side.
> > +	 */
> > +	if (limits->min_line_length_pck_bin > limits->min_line_length_pck
> > +	    / pll->binning_horizontal)
> > +		vt_op_binning_div = pll->binning_horizontal;
> > +	else
> > +		vt_op_binning_div = 1;
> > +	dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div);
> > +
> > +	/*
> > +	 * Profile 2 supports vt_pix_clk_div E [4, 10]
> > +	 *
> > +	 * Horizontal binning can be used as a base for difference in
> > +	 * divisors. One must make sure that horizontal blanking is
> > +	 * enough to accommodate the CSI-2 sync codes.
> > +	 *
> > +	 * Take scaling factor into account as well.
> > +	 *
> > +	 * Find absolute limits for the factor of vt divider.
> > +	 */
> > +	dev_dbg(dev, "scale_m: %d\n", pll->scale_m);
> > +	min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
> > +				  * pll->scale_n,
> 
> I still need
> 
>         if (pll->flags & SMIAPP_PLL_FLAG_DUAL_READOUT)
>                num_readout_paths = 2;
>         else
>                num_readout_paths = 1;
>         min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
>                                  * pll->scale_n * num_readout_paths,
> 
> for the AR0330 driver, but I can add that later.

Here?

That should come from lane_op_clock_ratio if your sensor needs that.

> > +				  lane_op_clock_ratio * vt_op_binning_div
> > +				  * pll->scale_m);
> 
> [snip]
> 
> > +	/*
> > +	 * Find pix_div such that a legal pix_div * sys_div results
> > +	 * into a value which is not smaller than div, the desired
> > +	 * divisor.
> > +	 */
> > +	for (vt_div = min_vt_div; vt_div <= max_vt_div;
> > +	     vt_div += 2 - (vt_div & 1)) {
> > +		for (sys_div = min_sys_div;
> > +		     sys_div <= max_sys_div;
> > +		     sys_div += 2 - (sys_div & 1)) {
> > +			int pix_div = DIV_ROUND_UP(vt_div, sys_div);
> > +
> > +			if (pix_div <
> > +			    limits->min_vt_pix_clk_div
> > +			    || pix_div
> > +			    > limits->max_vt_pix_clk_div) {
> 
> 			if (pix_div < limits->min_vt_pix_clk_div ||
> 			    pix_div > limits->max_vt_pix_clk_div) {

Will fix.

> > +				dev_dbg(dev,
> > +					"pix_div %d too small or too big (%d--%d)\n",
> > +					pix_div,
> > +					limits->min_vt_pix_clk_div,
> > +					limits->max_vt_pix_clk_div);
> > +				continue;
> > +			}
> > +
> > +			/* Check if this one is better. */
> > +			if (pix_div * sys_div
> > +			    <= ALIGN(min_vt_div, best_pix_div))
> > +				best_pix_div = pix_div;
> > +		}
> > +		if (best_pix_div < INT_MAX >> 1)
> > +			break;
> > +	}
> 
> [snip]
> 
> > diff --git a/drivers/media/video/smiapp/smiapp-core.c
> > b/drivers/media/video/smiapp/smiapp-core.c new file mode 100644
> > index 0000000..879fb1e
> > --- /dev/null
> > +++ b/drivers/media/video/smiapp/smiapp-core.c

I think I accidentally combined the two patches. I'll separate them again.

> 
> [snip]
> 
> > +static void smiapp_get_crop_compose(struct v4l2_subdev *subdev,
> > +				    struct v4l2_subdev_fh *fh,
> > +				    struct v4l2_rect **crops,
> > +				    struct v4l2_rect **comps, int which)
> > +{
> > +	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
> > +	int i;
> 
> Can you guess ? :-)

Hmm. signed? unsigned? int8_t? bool? :-D

> > +
> > +	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > +		if (crops)
> > +			for (i = 0; i < subdev->entity.num_pads; i++)
> > +				crops[i] = &ssd->crop[i];
> > +		if (comps)
> > +			*comps = &ssd->compose;
> > +	} else {
> > +		if (crops) {
> > +			for (i = 0; i < subdev->entity.num_pads; i++) {
> > +				crops[i] = v4l2_subdev_get_try_crop(fh, i);
> > +				BUG_ON(!crops[i]);
> > +			}
> > +		}
> > +		if (comps) {
> > +			*comps = v4l2_subdev_get_try_compose(fh,
> > +							     SMIAPP_PAD_SINK);
> > +			BUG_ON(!*comps);
> > +		}
> > +	}
> > +}
> 
> [snip]
> 
> > +static int smiapp_set_format(struct v4l2_subdev *subdev,
> > +			     struct v4l2_subdev_fh *fh,
> > +			     struct v4l2_subdev_format *fmt)
> > +{
> > +	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
> > +	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
> > +	struct v4l2_rect *crops[SMIAPP_PADS];
> > +	const struct smiapp_csi_data_format *csi_format = sensor->csi_format;
> > +	int i;
> 
> :-D

I will replace "int" with "unsigned". :-D

> > +
> > +	mutex_lock(&sensor->mutex);
> > +
> > +	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
> > +
> > +	if (subdev == &sensor->src->sd && fmt->pad == SMIAPP_PAD_SRC) {
> > +		for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
> > +			if (sensor->mbus_frame_fmts & (1 << i) &&
> > +			    smiapp_csi_data_formats[i].code
> > +			    == fmt->format.code) {
> > +				csi_format = &smiapp_csi_data_formats[i];
> > +				if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> > +					sensor->csi_format = csi_format;
> > +				break;
> > +			}
> > +		}
> > +	}
> > +
> > +	if (fmt->pad == ssd->source_pad) {
> > +		int rval;
> > +
> > +		rval = __smiapp_get_format(subdev, fh, fmt);
> > +		fmt->format.code = csi_format->code;
> > +
> > +		mutex_unlock(&sensor->mutex);
> > +		return rval;
> > +	}
> > +
> > +	fmt->format.code = csi_format->code;
> 
> This will result in the format code at the output of the pixel array being
> equal to the format code at the output of the binner/scaler. I don't think
> you want that.

Good point. I created another function to get that information that also
__smiapp_get_format() uses.

Kind regards,

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.1 34/35] smiapp: Generic SMIA++/SMIA PLL calculator
  2012-03-07 12:26   ` Laurent Pinchart
  2012-03-08 13:29     ` Sakari Ailus
@ 2012-03-08 13:57     ` Sakari Ailus
  2012-03-08 14:38       ` Laurent Pinchart
  2012-03-08 13:57     ` [PATCH v5.1 35/35] smiapp: Add driver Sakari Ailus
  2 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-08 13:57 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

Calculate PLL configuration based on input data: sensor configuration, board
properties and sensor-specific limits.

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
---
 drivers/media/video/Kconfig      |    3 +
 drivers/media/video/Makefile     |    2 +
 drivers/media/video/smiapp-pll.c |  419 ++++++++++++++++++++++++++++++++++++++
 drivers/media/video/smiapp-pll.h |  103 ++++++++++
 4 files changed, 527 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/smiapp-pll.c
 create mode 100644 drivers/media/video/smiapp-pll.h

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9495b6a..7eac873 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -459,6 +459,9 @@ config VIDEO_AK881X
 
 comment "Camera sensor devices"
 
+config VIDEO_SMIAPP_PLL
+	tristate
+
 config VIDEO_OV7670
 	tristate "OmniVision OV7670 sensor support"
 	depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 563443c..2fed63d 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -76,6 +76,8 @@ obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
 obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
 
+obj-$(CONFIG_VIDEO_SMIAPP_PLL)	+= smiapp-pll.o
+
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
 obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/video/smiapp-pll.c
new file mode 100644
index 0000000..c8ffdc9
--- /dev/null
+++ b/drivers/media/video/smiapp-pll.c
@@ -0,0 +1,419 @@
+/*
+ * drivers/media/video/smiapp-pll.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gcd.h>
+#include <linux/lcm.h>
+#include <linux/module.h>
+
+#include "smiapp-pll.h"
+
+/* Return an even number or one. */
+static inline uint32_t clk_div_even(uint32_t a)
+{
+	return max_t(uint32_t, 1, a & ~1);
+}
+
+/* Return an even number or one. */
+static inline uint32_t clk_div_even_up(uint32_t a)
+{
+	if (a == 1)
+		return 1;
+	return (a + 1) & ~1;
+}
+
+static inline uint32_t is_one_or_even(uint32_t a)
+{
+	if (a == 1)
+		return 1;
+	if (a & 1)
+		return 0;
+
+	return 1;
+}
+
+static int bounds_check(struct device *dev, uint32_t val,
+			uint32_t min, uint32_t max, char *str)
+{
+	if (val >= min && val <= max)
+		return 0;
+
+	dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max);
+
+	return -EINVAL;
+}
+
+static void print_pll(struct device *dev, struct smiapp_pll *pll)
+{
+	dev_dbg(dev, "pre_pll_clk_div\t%d\n",  pll->pre_pll_clk_div);
+	dev_dbg(dev, "pll_multiplier \t%d\n",  pll->pll_multiplier);
+	if (pll->flags != SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
+		dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div);
+		dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div);
+	}
+	dev_dbg(dev, "vt_sys_clk_div \t%d\n",  pll->vt_sys_clk_div);
+	dev_dbg(dev, "vt_pix_clk_div \t%d\n",  pll->vt_pix_clk_div);
+
+	dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz);
+	dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz);
+	dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz);
+	if (pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
+		dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n",
+			pll->op_sys_clk_freq_hz);
+		dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n",
+			pll->op_pix_clk_freq_hz);
+	}
+	dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz);
+	dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
+}
+
+int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
+			 struct smiapp_pll *pll)
+{
+	uint32_t sys_div;
+	uint32_t best_pix_div = INT_MAX >> 1;
+	uint32_t vt_op_binning_div;
+	uint32_t lane_op_clock_ratio;
+	uint32_t mul, div;
+	uint32_t more_mul_min, more_mul_max;
+	uint32_t more_mul_factor;
+	uint32_t min_vt_div, max_vt_div, vt_div;
+	uint32_t min_sys_div, max_sys_div;
+	unsigned i;
+	int rval;
+
+	if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
+		lane_op_clock_ratio = pll->lanes;
+	else
+		lane_op_clock_ratio = 1;
+	dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
+
+	dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
+		pll->binning_vertical);
+
+	/* CSI transfers 2 bits per clock per lane; thus times 2 */
+	pll->pll_op_clk_freq_hz = pll->link_freq * 2
+		* (pll->lanes / lane_op_clock_ratio);
+
+	/* Figure out limits for pre-pll divider based on extclk */
+	dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+	limits->max_pre_pll_clk_div =
+		min_t(uint16_t, limits->max_pre_pll_clk_div,
+		      clk_div_even(pll->ext_clk_freq_hz /
+				   limits->min_pll_ip_freq_hz));
+	limits->min_pre_pll_clk_div =
+		max_t(uint16_t, limits->min_pre_pll_clk_div,
+		      clk_div_even(pll->ext_clk_freq_hz /
+				   limits->max_pll_ip_freq_hz));
+	dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+
+	i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
+	mul = div_u64(pll->pll_op_clk_freq_hz, i);
+	div = pll->ext_clk_freq_hz / i;
+	dev_dbg(dev, "mul %d / div %d\n", mul, div);
+
+	limits->min_pre_pll_clk_div =
+		max_t(uint16_t, limits->min_pre_pll_clk_div,
+		      clk_div_even_up(
+			      DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
+					   limits->max_pll_op_freq_hz)));
+	dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+
+	if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) {
+		dev_err(dev, "unable to compute pre_pll divisor\n");
+		return -EINVAL;
+	}
+
+	pll->pre_pll_clk_div = limits->min_pre_pll_clk_div;
+
+	/*
+	 * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
+	 * too high.
+	 */
+	dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div);
+
+	/* Don't go above max pll multiplier. */
+	more_mul_max = limits->max_pll_multiplier / mul;
+	dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n",
+		more_mul_max);
+	/* Don't go above max pll op frequency. */
+	more_mul_max =
+		min_t(int,
+		      more_mul_max,
+		      limits->max_pll_op_freq_hz
+		      / (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul));
+	dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n",
+		more_mul_max);
+	/* Don't go above the division capability of op sys clock divider. */
+	more_mul_max = min(more_mul_max,
+			   limits->max_op_sys_clk_div * pll->pre_pll_clk_div
+			   / div);
+	dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n",
+		more_mul_max);
+	/* Ensure we won't go above min_pll_multiplier. */
+	more_mul_max = min(more_mul_max,
+			   DIV_ROUND_UP(limits->max_pll_multiplier, mul));
+	dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n",
+		more_mul_max);
+
+	/* Ensure we won't go below min_pll_op_freq_hz. */
+	more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz,
+				    pll->ext_clk_freq_hz / pll->pre_pll_clk_div
+				    * mul);
+	dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n",
+		more_mul_min);
+	/* Ensure we won't go below min_pll_multiplier. */
+	more_mul_min = max(more_mul_min,
+			   DIV_ROUND_UP(limits->min_pll_multiplier, mul));
+	dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n",
+		more_mul_min);
+
+	if (more_mul_min > more_mul_max) {
+		dev_warn(dev,
+			 "unable to compute more_mul_min and more_mul_max");
+		return -EINVAL;
+	}
+
+	more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div;
+	dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor);
+	more_mul_factor = lcm(more_mul_factor, limits->min_op_sys_clk_div);
+	dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
+		more_mul_factor);
+	i = ALIGN(more_mul_min, more_mul_factor);
+	if (!is_one_or_even(i))
+		i <<= 1;
+
+	dev_dbg(dev, "final more_mul: %d\n", i);
+	if (i > more_mul_max) {
+		dev_warn(dev, "final more_mul is bad, max %d", more_mul_max);
+		return -EINVAL;
+	}
+
+	pll->pll_multiplier = mul * i;
+	pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div;
+	dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div);
+
+	pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz
+		/ pll->pre_pll_clk_div;
+
+	pll->pll_op_clk_freq_hz = pll->pll_ip_clk_freq_hz
+		* pll->pll_multiplier;
+
+	/* Derive pll_op_clk_freq_hz. */
+	pll->op_sys_clk_freq_hz =
+		pll->pll_op_clk_freq_hz / pll->op_sys_clk_div;
+
+	pll->op_pix_clk_div = pll->bits_per_pixel;
+	dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div);
+
+	pll->op_pix_clk_freq_hz =
+		pll->op_sys_clk_freq_hz / pll->op_pix_clk_div;
+
+	/*
+	 * Some sensors perform analogue binning and some do this
+	 * digitally. The ones doing this digitally can be roughly be
+	 * found out using this formula. The ones doing this digitally
+	 * should run at higher clock rate, so smaller divisor is used
+	 * on video timing side.
+	 */
+	if (limits->min_line_length_pck_bin > limits->min_line_length_pck
+	    / pll->binning_horizontal)
+		vt_op_binning_div = pll->binning_horizontal;
+	else
+		vt_op_binning_div = 1;
+	dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div);
+
+	/*
+	 * Profile 2 supports vt_pix_clk_div E [4, 10]
+	 *
+	 * Horizontal binning can be used as a base for difference in
+	 * divisors. One must make sure that horizontal blanking is
+	 * enough to accommodate the CSI-2 sync codes.
+	 *
+	 * Take scaling factor into account as well.
+	 *
+	 * Find absolute limits for the factor of vt divider.
+	 */
+	dev_dbg(dev, "scale_m: %d\n", pll->scale_m);
+	min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
+				  * pll->scale_n,
+				  lane_op_clock_ratio * vt_op_binning_div
+				  * pll->scale_m);
+
+	/* Find smallest and biggest allowed vt divisor. */
+	dev_dbg(dev, "min_vt_div: %d\n", min_vt_div);
+	min_vt_div = max(min_vt_div,
+			 DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				      limits->max_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n",
+		min_vt_div);
+	min_vt_div = max_t(uint32_t, min_vt_div,
+			   limits->min_vt_pix_clk_div
+			   * limits->min_vt_sys_clk_div);
+	dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div);
+
+	max_vt_div = limits->max_vt_sys_clk_div * limits->max_vt_pix_clk_div;
+	dev_dbg(dev, "max_vt_div: %d\n", max_vt_div);
+	max_vt_div = min(max_vt_div,
+			 DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				      limits->min_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n",
+		max_vt_div);
+
+	/*
+	 * Find limitsits for sys_clk_div. Not all values are possible
+	 * with all values of pix_clk_div.
+	 */
+	min_sys_div = limits->min_vt_sys_clk_div;
+	dev_dbg(dev, "min_sys_div: %d\n", min_sys_div);
+	min_sys_div = max(min_sys_div,
+			  DIV_ROUND_UP(min_vt_div,
+				       limits->max_vt_pix_clk_div));
+	dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div);
+	min_sys_div = max(min_sys_div,
+			  pll->pll_op_clk_freq_hz
+			  / limits->max_vt_sys_clk_freq_hz);
+	dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div);
+	min_sys_div = clk_div_even_up(min_sys_div);
+	dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div);
+
+	max_sys_div = limits->max_vt_sys_clk_div;
+	dev_dbg(dev, "max_sys_div: %d\n", max_sys_div);
+	max_sys_div = min(max_sys_div,
+			  DIV_ROUND_UP(max_vt_div,
+				       limits->min_vt_pix_clk_div));
+	dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div);
+	max_sys_div = min(max_sys_div,
+			  DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				       limits->min_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div);
+
+	/*
+	 * Find pix_div such that a legal pix_div * sys_div results
+	 * into a value which is not smaller than div, the desired
+	 * divisor.
+	 */
+	for (vt_div = min_vt_div; vt_div <= max_vt_div;
+	     vt_div += 2 - (vt_div & 1)) {
+		for (sys_div = min_sys_div;
+		     sys_div <= max_sys_div;
+		     sys_div += 2 - (sys_div & 1)) {
+			int pix_div = DIV_ROUND_UP(vt_div, sys_div);
+
+			if (pix_div <
+			    limits->min_vt_pix_clk_div
+			    || pix_div
+			    > limits->max_vt_pix_clk_div) {
+				dev_dbg(dev,
+					"pix_div %d too small or too big (%d--%d)\n",
+					pix_div,
+					limits->min_vt_pix_clk_div,
+					limits->max_vt_pix_clk_div);
+				continue;
+			}
+
+			/* Check if this one is better. */
+			if (pix_div * sys_div
+			    <= ALIGN(min_vt_div, best_pix_div))
+				best_pix_div = pix_div;
+		}
+		if (best_pix_div < INT_MAX >> 1)
+			break;
+	}
+
+	pll->vt_sys_clk_div = DIV_ROUND_UP(min_vt_div, best_pix_div);
+	pll->vt_pix_clk_div = best_pix_div;
+
+	pll->vt_sys_clk_freq_hz =
+		pll->pll_op_clk_freq_hz / pll->vt_sys_clk_div;
+	pll->vt_pix_clk_freq_hz =
+		pll->vt_sys_clk_freq_hz / pll->vt_pix_clk_div;
+
+	pll->pixel_rate_csi =
+		pll->op_pix_clk_freq_hz * lane_op_clock_ratio;
+
+	print_pll(dev, pll);
+
+	rval = bounds_check(dev, pll->pre_pll_clk_div,
+			    limits->min_pre_pll_clk_div,
+			    limits->max_pre_pll_clk_div, "pre_pll_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_ip_clk_freq_hz,
+			limits->min_pll_ip_freq_hz, limits->max_pll_ip_freq_hz,
+			"pll_ip_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_multiplier,
+			limits->min_pll_multiplier, limits->max_pll_multiplier,
+			"pll_multiplier");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_op_clk_freq_hz,
+			limits->min_pll_op_freq_hz, limits->max_pll_op_freq_hz,
+			"pll_op_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_sys_clk_div,
+			limits->min_op_sys_clk_div, limits->max_op_sys_clk_div,
+			"op_sys_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_pix_clk_div,
+			limits->min_op_pix_clk_div, limits->max_op_pix_clk_div,
+			"op_pix_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_sys_clk_freq_hz,
+			limits->min_op_sys_clk_freq_hz,
+			limits->max_op_sys_clk_freq_hz,
+			"op_sys_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_pix_clk_freq_hz,
+			limits->min_op_pix_clk_freq_hz,
+			limits->max_op_pix_clk_freq_hz,
+			"op_pix_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->vt_sys_clk_freq_hz,
+			limits->min_vt_sys_clk_freq_hz,
+			limits->max_vt_sys_clk_freq_hz,
+			"vt_sys_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->vt_pix_clk_freq_hz,
+			limits->min_vt_pix_clk_freq_hz,
+			limits->max_vt_pix_clk_freq_hz,
+			"vt_pix_clk_freq_hz");
+
+	return rval;
+}
+EXPORT_SYMBOL_GPL(smiapp_pll_calculate);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
+MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp-pll.h b/drivers/media/video/smiapp-pll.h
new file mode 100644
index 0000000..9eab63f
--- /dev/null
+++ b/drivers/media/video/smiapp-pll.h
@@ -0,0 +1,103 @@
+/*
+ * drivers/media/video/smiapp-pll.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_PLL_H
+#define SMIAPP_PLL_H
+
+#include <linux/device.h>
+
+struct smiapp_pll {
+	uint8_t lanes;
+	uint8_t binning_horizontal;
+	uint8_t binning_vertical;
+	uint8_t scale_m;
+	uint8_t scale_n;
+	uint8_t bits_per_pixel;
+	uint16_t flags;
+	uint32_t link_freq;
+
+	uint16_t pre_pll_clk_div;
+	uint16_t pll_multiplier;
+	uint16_t op_sys_clk_div;
+	uint16_t op_pix_clk_div;
+	uint16_t vt_sys_clk_div;
+	uint16_t vt_pix_clk_div;
+
+	uint32_t ext_clk_freq_hz;
+	uint32_t pll_ip_clk_freq_hz;
+	uint32_t pll_op_clk_freq_hz;
+	uint32_t op_sys_clk_freq_hz;
+	uint32_t op_pix_clk_freq_hz;
+	uint32_t vt_sys_clk_freq_hz;
+	uint32_t vt_pix_clk_freq_hz;
+
+	uint32_t pixel_rate_csi;
+};
+
+struct smiapp_pll_limits {
+	/* Strict PLL limits */
+	uint32_t min_ext_clk_freq_hz;
+	uint32_t max_ext_clk_freq_hz;
+	uint16_t min_pre_pll_clk_div;
+	uint16_t max_pre_pll_clk_div;
+	uint32_t min_pll_ip_freq_hz;
+	uint32_t max_pll_ip_freq_hz;
+	uint16_t min_pll_multiplier;
+	uint16_t max_pll_multiplier;
+	uint32_t min_pll_op_freq_hz;
+	uint32_t max_pll_op_freq_hz;
+
+	uint16_t min_vt_sys_clk_div;
+	uint16_t max_vt_sys_clk_div;
+	uint32_t min_vt_sys_clk_freq_hz;
+	uint32_t max_vt_sys_clk_freq_hz;
+	uint16_t min_vt_pix_clk_div;
+	uint16_t max_vt_pix_clk_div;
+	uint32_t min_vt_pix_clk_freq_hz;
+	uint32_t max_vt_pix_clk_freq_hz;
+
+	uint16_t min_op_sys_clk_div;
+	uint16_t max_op_sys_clk_div;
+	uint32_t min_op_sys_clk_freq_hz;
+	uint32_t max_op_sys_clk_freq_hz;
+	uint16_t min_op_pix_clk_div;
+	uint16_t max_op_pix_clk_div;
+	uint32_t min_op_pix_clk_freq_hz;
+	uint32_t max_op_pix_clk_freq_hz;
+
+	/* Other relevant limits */
+	uint32_t min_line_length_pck_bin;
+	uint32_t min_line_length_pck;
+};
+
+/* op pix clock is for all lanes in total normally */
+#define SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
+#define SMIAPP_PLL_FLAG_NO_OP_CLOCKS				(1 << 1)
+
+struct device;
+
+int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
+			 struct smiapp_pll *pll);
+
+#endif /* SMIAPP_PLL_H */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.1 34/35] smiapp: Generic SMIA++/SMIA PLL calculator
  2012-03-08 13:57     ` [PATCH v5.1 " Sakari Ailus
@ 2012-03-08 14:38       ` Laurent Pinchart
  2012-03-08 14:48         ` Sakari Ailus
  2012-03-08 14:49         ` [PATCH v5.2 " Sakari Ailus
  0 siblings, 2 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-08 14:38 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Thursday 08 March 2012 15:57:29 Sakari Ailus wrote:
> From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> 
> Calculate PLL configuration based on input data: sensor configuration, board
> properties and sensor-specific limits.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

[snip]

> diff --git a/drivers/media/video/smiapp-pll.c
> b/drivers/media/video/smiapp-pll.c new file mode 100644
> index 0000000..c8ffdc9
> --- /dev/null
> +++ b/drivers/media/video/smiapp-pll.c

[snip]

> +	/*
> +	 * Find pix_div such that a legal pix_div * sys_div results
> +	 * into a value which is not smaller than div, the desired
> +	 * divisor.
> +	 */
> +	for (vt_div = min_vt_div; vt_div <= max_vt_div;
> +	     vt_div += 2 - (vt_div & 1)) {
> +		for (sys_div = min_sys_div;
> +		     sys_div <= max_sys_div;
> +		     sys_div += 2 - (sys_div & 1)) {
> +			int pix_div = DIV_ROUND_UP(vt_div, sys_div);
> +
> +			if (pix_div <
> +			    limits->min_vt_pix_clk_div
> +			    || pix_div
> +			    > limits->max_vt_pix_clk_div) {

Maybe you should get some sleep, I've heard it helps memory ;-)

> +				dev_dbg(dev,
> +					"pix_div %d too small or too big (%d--%d)\n",
> +					pix_div,
> +					limits->min_vt_pix_clk_div,
> +					limits->max_vt_pix_clk_div);
> +				continue;
> +			}
> +
> +			/* Check if this one is better. */
> +			if (pix_div * sys_div
> +			    <= ALIGN(min_vt_div, best_pix_div))
> +				best_pix_div = pix_div;
> +		}
> +		if (best_pix_div < INT_MAX >> 1)
> +			break;
> +	}

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.1 34/35] smiapp: Generic SMIA++/SMIA PLL calculator
  2012-03-08 14:38       ` Laurent Pinchart
@ 2012-03-08 14:48         ` Sakari Ailus
  2012-03-08 14:49         ` [PATCH v5.2 " Sakari Ailus
  1 sibling, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-08 14:48 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

On Thu, Mar 08, 2012 at 03:38:45PM +0100, Laurent Pinchart wrote:
> Hi Sakari,
> 
> Thanks for the patch.
> 
> On Thursday 08 March 2012 15:57:29 Sakari Ailus wrote:
> > From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> > 
> > Calculate PLL configuration based on input data: sensor configuration, board
> > properties and sensor-specific limits.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> 
> [snip]
> 
> > diff --git a/drivers/media/video/smiapp-pll.c
> > b/drivers/media/video/smiapp-pll.c new file mode 100644
> > index 0000000..c8ffdc9
> > --- /dev/null
> > +++ b/drivers/media/video/smiapp-pll.c
> 
> [snip]
> 
> > +	/*
> > +	 * Find pix_div such that a legal pix_div * sys_div results
> > +	 * into a value which is not smaller than div, the desired
> > +	 * divisor.
> > +	 */
> > +	for (vt_div = min_vt_div; vt_div <= max_vt_div;
> > +	     vt_div += 2 - (vt_div & 1)) {
> > +		for (sys_div = min_sys_div;
> > +		     sys_div <= max_sys_div;
> > +		     sys_div += 2 - (sys_div & 1)) {
> > +			int pix_div = DIV_ROUND_UP(vt_div, sys_div);
> > +
> > +			if (pix_div <
> > +			    limits->min_vt_pix_clk_div
> > +			    || pix_div
> > +			    > limits->max_vt_pix_clk_div) {
> 
> Maybe you should get some sleep, I've heard it helps memory ;-)

Oh. That's what it was. I didn't find it the first time. Sorry about that.

I'll send a new version where that has been fixed.

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.2 34/35] smiapp: Generic SMIA++/SMIA PLL calculator
  2012-03-08 14:38       ` Laurent Pinchart
  2012-03-08 14:48         ` Sakari Ailus
@ 2012-03-08 14:49         ` Sakari Ailus
  2012-03-08 14:51           ` Laurent Pinchart
  1 sibling, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-08 14:49 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

Calculate PLL configuration based on input data: sensor configuration, board
properties and sensor-specific limits.

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
---
 drivers/media/video/Kconfig      |    3 +
 drivers/media/video/Makefile     |    2 +
 drivers/media/video/smiapp-pll.c |  417 ++++++++++++++++++++++++++++++++++++++
 drivers/media/video/smiapp-pll.h |  103 ++++++++++
 4 files changed, 525 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/smiapp-pll.c
 create mode 100644 drivers/media/video/smiapp-pll.h

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9495b6a..7eac873 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -459,6 +459,9 @@ config VIDEO_AK881X
 
 comment "Camera sensor devices"
 
+config VIDEO_SMIAPP_PLL
+	tristate
+
 config VIDEO_OV7670
 	tristate "OmniVision OV7670 sensor support"
 	depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 563443c..2fed63d 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -76,6 +76,8 @@ obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
 obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
 
+obj-$(CONFIG_VIDEO_SMIAPP_PLL)	+= smiapp-pll.o
+
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
 obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/video/smiapp-pll.c
new file mode 100644
index 0000000..2e059c4
--- /dev/null
+++ b/drivers/media/video/smiapp-pll.c
@@ -0,0 +1,417 @@
+/*
+ * drivers/media/video/smiapp-pll.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gcd.h>
+#include <linux/lcm.h>
+#include <linux/module.h>
+
+#include "smiapp-pll.h"
+
+/* Return an even number or one. */
+static inline uint32_t clk_div_even(uint32_t a)
+{
+	return max_t(uint32_t, 1, a & ~1);
+}
+
+/* Return an even number or one. */
+static inline uint32_t clk_div_even_up(uint32_t a)
+{
+	if (a == 1)
+		return 1;
+	return (a + 1) & ~1;
+}
+
+static inline uint32_t is_one_or_even(uint32_t a)
+{
+	if (a == 1)
+		return 1;
+	if (a & 1)
+		return 0;
+
+	return 1;
+}
+
+static int bounds_check(struct device *dev, uint32_t val,
+			uint32_t min, uint32_t max, char *str)
+{
+	if (val >= min && val <= max)
+		return 0;
+
+	dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max);
+
+	return -EINVAL;
+}
+
+static void print_pll(struct device *dev, struct smiapp_pll *pll)
+{
+	dev_dbg(dev, "pre_pll_clk_div\t%d\n",  pll->pre_pll_clk_div);
+	dev_dbg(dev, "pll_multiplier \t%d\n",  pll->pll_multiplier);
+	if (pll->flags != SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
+		dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div);
+		dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div);
+	}
+	dev_dbg(dev, "vt_sys_clk_div \t%d\n",  pll->vt_sys_clk_div);
+	dev_dbg(dev, "vt_pix_clk_div \t%d\n",  pll->vt_pix_clk_div);
+
+	dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz);
+	dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz);
+	dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz);
+	if (pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
+		dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n",
+			pll->op_sys_clk_freq_hz);
+		dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n",
+			pll->op_pix_clk_freq_hz);
+	}
+	dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz);
+	dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
+}
+
+int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
+			 struct smiapp_pll *pll)
+{
+	uint32_t sys_div;
+	uint32_t best_pix_div = INT_MAX >> 1;
+	uint32_t vt_op_binning_div;
+	uint32_t lane_op_clock_ratio;
+	uint32_t mul, div;
+	uint32_t more_mul_min, more_mul_max;
+	uint32_t more_mul_factor;
+	uint32_t min_vt_div, max_vt_div, vt_div;
+	uint32_t min_sys_div, max_sys_div;
+	unsigned i;
+	int rval;
+
+	if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
+		lane_op_clock_ratio = pll->lanes;
+	else
+		lane_op_clock_ratio = 1;
+	dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
+
+	dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
+		pll->binning_vertical);
+
+	/* CSI transfers 2 bits per clock per lane; thus times 2 */
+	pll->pll_op_clk_freq_hz = pll->link_freq * 2
+		* (pll->lanes / lane_op_clock_ratio);
+
+	/* Figure out limits for pre-pll divider based on extclk */
+	dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+	limits->max_pre_pll_clk_div =
+		min_t(uint16_t, limits->max_pre_pll_clk_div,
+		      clk_div_even(pll->ext_clk_freq_hz /
+				   limits->min_pll_ip_freq_hz));
+	limits->min_pre_pll_clk_div =
+		max_t(uint16_t, limits->min_pre_pll_clk_div,
+		      clk_div_even(pll->ext_clk_freq_hz /
+				   limits->max_pll_ip_freq_hz));
+	dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+
+	i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
+	mul = div_u64(pll->pll_op_clk_freq_hz, i);
+	div = pll->ext_clk_freq_hz / i;
+	dev_dbg(dev, "mul %d / div %d\n", mul, div);
+
+	limits->min_pre_pll_clk_div =
+		max_t(uint16_t, limits->min_pre_pll_clk_div,
+		      clk_div_even_up(
+			      DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
+					   limits->max_pll_op_freq_hz)));
+	dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
+		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
+
+	if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) {
+		dev_err(dev, "unable to compute pre_pll divisor\n");
+		return -EINVAL;
+	}
+
+	pll->pre_pll_clk_div = limits->min_pre_pll_clk_div;
+
+	/*
+	 * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
+	 * too high.
+	 */
+	dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div);
+
+	/* Don't go above max pll multiplier. */
+	more_mul_max = limits->max_pll_multiplier / mul;
+	dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n",
+		more_mul_max);
+	/* Don't go above max pll op frequency. */
+	more_mul_max =
+		min_t(int,
+		      more_mul_max,
+		      limits->max_pll_op_freq_hz
+		      / (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul));
+	dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n",
+		more_mul_max);
+	/* Don't go above the division capability of op sys clock divider. */
+	more_mul_max = min(more_mul_max,
+			   limits->max_op_sys_clk_div * pll->pre_pll_clk_div
+			   / div);
+	dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n",
+		more_mul_max);
+	/* Ensure we won't go above min_pll_multiplier. */
+	more_mul_max = min(more_mul_max,
+			   DIV_ROUND_UP(limits->max_pll_multiplier, mul));
+	dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n",
+		more_mul_max);
+
+	/* Ensure we won't go below min_pll_op_freq_hz. */
+	more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz,
+				    pll->ext_clk_freq_hz / pll->pre_pll_clk_div
+				    * mul);
+	dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n",
+		more_mul_min);
+	/* Ensure we won't go below min_pll_multiplier. */
+	more_mul_min = max(more_mul_min,
+			   DIV_ROUND_UP(limits->min_pll_multiplier, mul));
+	dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n",
+		more_mul_min);
+
+	if (more_mul_min > more_mul_max) {
+		dev_warn(dev,
+			 "unable to compute more_mul_min and more_mul_max");
+		return -EINVAL;
+	}
+
+	more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div;
+	dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor);
+	more_mul_factor = lcm(more_mul_factor, limits->min_op_sys_clk_div);
+	dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
+		more_mul_factor);
+	i = ALIGN(more_mul_min, more_mul_factor);
+	if (!is_one_or_even(i))
+		i <<= 1;
+
+	dev_dbg(dev, "final more_mul: %d\n", i);
+	if (i > more_mul_max) {
+		dev_warn(dev, "final more_mul is bad, max %d", more_mul_max);
+		return -EINVAL;
+	}
+
+	pll->pll_multiplier = mul * i;
+	pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div;
+	dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div);
+
+	pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz
+		/ pll->pre_pll_clk_div;
+
+	pll->pll_op_clk_freq_hz = pll->pll_ip_clk_freq_hz
+		* pll->pll_multiplier;
+
+	/* Derive pll_op_clk_freq_hz. */
+	pll->op_sys_clk_freq_hz =
+		pll->pll_op_clk_freq_hz / pll->op_sys_clk_div;
+
+	pll->op_pix_clk_div = pll->bits_per_pixel;
+	dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div);
+
+	pll->op_pix_clk_freq_hz =
+		pll->op_sys_clk_freq_hz / pll->op_pix_clk_div;
+
+	/*
+	 * Some sensors perform analogue binning and some do this
+	 * digitally. The ones doing this digitally can be roughly be
+	 * found out using this formula. The ones doing this digitally
+	 * should run at higher clock rate, so smaller divisor is used
+	 * on video timing side.
+	 */
+	if (limits->min_line_length_pck_bin > limits->min_line_length_pck
+	    / pll->binning_horizontal)
+		vt_op_binning_div = pll->binning_horizontal;
+	else
+		vt_op_binning_div = 1;
+	dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div);
+
+	/*
+	 * Profile 2 supports vt_pix_clk_div E [4, 10]
+	 *
+	 * Horizontal binning can be used as a base for difference in
+	 * divisors. One must make sure that horizontal blanking is
+	 * enough to accommodate the CSI-2 sync codes.
+	 *
+	 * Take scaling factor into account as well.
+	 *
+	 * Find absolute limits for the factor of vt divider.
+	 */
+	dev_dbg(dev, "scale_m: %d\n", pll->scale_m);
+	min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
+				  * pll->scale_n,
+				  lane_op_clock_ratio * vt_op_binning_div
+				  * pll->scale_m);
+
+	/* Find smallest and biggest allowed vt divisor. */
+	dev_dbg(dev, "min_vt_div: %d\n", min_vt_div);
+	min_vt_div = max(min_vt_div,
+			 DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				      limits->max_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n",
+		min_vt_div);
+	min_vt_div = max_t(uint32_t, min_vt_div,
+			   limits->min_vt_pix_clk_div
+			   * limits->min_vt_sys_clk_div);
+	dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div);
+
+	max_vt_div = limits->max_vt_sys_clk_div * limits->max_vt_pix_clk_div;
+	dev_dbg(dev, "max_vt_div: %d\n", max_vt_div);
+	max_vt_div = min(max_vt_div,
+			 DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				      limits->min_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n",
+		max_vt_div);
+
+	/*
+	 * Find limitsits for sys_clk_div. Not all values are possible
+	 * with all values of pix_clk_div.
+	 */
+	min_sys_div = limits->min_vt_sys_clk_div;
+	dev_dbg(dev, "min_sys_div: %d\n", min_sys_div);
+	min_sys_div = max(min_sys_div,
+			  DIV_ROUND_UP(min_vt_div,
+				       limits->max_vt_pix_clk_div));
+	dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div);
+	min_sys_div = max(min_sys_div,
+			  pll->pll_op_clk_freq_hz
+			  / limits->max_vt_sys_clk_freq_hz);
+	dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div);
+	min_sys_div = clk_div_even_up(min_sys_div);
+	dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div);
+
+	max_sys_div = limits->max_vt_sys_clk_div;
+	dev_dbg(dev, "max_sys_div: %d\n", max_sys_div);
+	max_sys_div = min(max_sys_div,
+			  DIV_ROUND_UP(max_vt_div,
+				       limits->min_vt_pix_clk_div));
+	dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div);
+	max_sys_div = min(max_sys_div,
+			  DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
+				       limits->min_vt_pix_clk_freq_hz));
+	dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div);
+
+	/*
+	 * Find pix_div such that a legal pix_div * sys_div results
+	 * into a value which is not smaller than div, the desired
+	 * divisor.
+	 */
+	for (vt_div = min_vt_div; vt_div <= max_vt_div;
+	     vt_div += 2 - (vt_div & 1)) {
+		for (sys_div = min_sys_div;
+		     sys_div <= max_sys_div;
+		     sys_div += 2 - (sys_div & 1)) {
+			int pix_div = DIV_ROUND_UP(vt_div, sys_div);
+
+			if (pix_div < limits->min_vt_pix_clk_div
+			    || pix_div > limits->max_vt_pix_clk_div) {
+				dev_dbg(dev,
+					"pix_div %d too small or too big (%d--%d)\n",
+					pix_div,
+					limits->min_vt_pix_clk_div,
+					limits->max_vt_pix_clk_div);
+				continue;
+			}
+
+			/* Check if this one is better. */
+			if (pix_div * sys_div
+			    <= ALIGN(min_vt_div, best_pix_div))
+				best_pix_div = pix_div;
+		}
+		if (best_pix_div < INT_MAX >> 1)
+			break;
+	}
+
+	pll->vt_sys_clk_div = DIV_ROUND_UP(min_vt_div, best_pix_div);
+	pll->vt_pix_clk_div = best_pix_div;
+
+	pll->vt_sys_clk_freq_hz =
+		pll->pll_op_clk_freq_hz / pll->vt_sys_clk_div;
+	pll->vt_pix_clk_freq_hz =
+		pll->vt_sys_clk_freq_hz / pll->vt_pix_clk_div;
+
+	pll->pixel_rate_csi =
+		pll->op_pix_clk_freq_hz * lane_op_clock_ratio;
+
+	print_pll(dev, pll);
+
+	rval = bounds_check(dev, pll->pre_pll_clk_div,
+			    limits->min_pre_pll_clk_div,
+			    limits->max_pre_pll_clk_div, "pre_pll_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_ip_clk_freq_hz,
+			limits->min_pll_ip_freq_hz, limits->max_pll_ip_freq_hz,
+			"pll_ip_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_multiplier,
+			limits->min_pll_multiplier, limits->max_pll_multiplier,
+			"pll_multiplier");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->pll_op_clk_freq_hz,
+			limits->min_pll_op_freq_hz, limits->max_pll_op_freq_hz,
+			"pll_op_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_sys_clk_div,
+			limits->min_op_sys_clk_div, limits->max_op_sys_clk_div,
+			"op_sys_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_pix_clk_div,
+			limits->min_op_pix_clk_div, limits->max_op_pix_clk_div,
+			"op_pix_clk_div");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_sys_clk_freq_hz,
+			limits->min_op_sys_clk_freq_hz,
+			limits->max_op_sys_clk_freq_hz,
+			"op_sys_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->op_pix_clk_freq_hz,
+			limits->min_op_pix_clk_freq_hz,
+			limits->max_op_pix_clk_freq_hz,
+			"op_pix_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->vt_sys_clk_freq_hz,
+			limits->min_vt_sys_clk_freq_hz,
+			limits->max_vt_sys_clk_freq_hz,
+			"vt_sys_clk_freq_hz");
+	if (!rval)
+		rval = bounds_check(
+			dev, pll->vt_pix_clk_freq_hz,
+			limits->min_vt_pix_clk_freq_hz,
+			limits->max_vt_pix_clk_freq_hz,
+			"vt_pix_clk_freq_hz");
+
+	return rval;
+}
+EXPORT_SYMBOL_GPL(smiapp_pll_calculate);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
+MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp-pll.h b/drivers/media/video/smiapp-pll.h
new file mode 100644
index 0000000..9eab63f
--- /dev/null
+++ b/drivers/media/video/smiapp-pll.h
@@ -0,0 +1,103 @@
+/*
+ * drivers/media/video/smiapp-pll.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_PLL_H
+#define SMIAPP_PLL_H
+
+#include <linux/device.h>
+
+struct smiapp_pll {
+	uint8_t lanes;
+	uint8_t binning_horizontal;
+	uint8_t binning_vertical;
+	uint8_t scale_m;
+	uint8_t scale_n;
+	uint8_t bits_per_pixel;
+	uint16_t flags;
+	uint32_t link_freq;
+
+	uint16_t pre_pll_clk_div;
+	uint16_t pll_multiplier;
+	uint16_t op_sys_clk_div;
+	uint16_t op_pix_clk_div;
+	uint16_t vt_sys_clk_div;
+	uint16_t vt_pix_clk_div;
+
+	uint32_t ext_clk_freq_hz;
+	uint32_t pll_ip_clk_freq_hz;
+	uint32_t pll_op_clk_freq_hz;
+	uint32_t op_sys_clk_freq_hz;
+	uint32_t op_pix_clk_freq_hz;
+	uint32_t vt_sys_clk_freq_hz;
+	uint32_t vt_pix_clk_freq_hz;
+
+	uint32_t pixel_rate_csi;
+};
+
+struct smiapp_pll_limits {
+	/* Strict PLL limits */
+	uint32_t min_ext_clk_freq_hz;
+	uint32_t max_ext_clk_freq_hz;
+	uint16_t min_pre_pll_clk_div;
+	uint16_t max_pre_pll_clk_div;
+	uint32_t min_pll_ip_freq_hz;
+	uint32_t max_pll_ip_freq_hz;
+	uint16_t min_pll_multiplier;
+	uint16_t max_pll_multiplier;
+	uint32_t min_pll_op_freq_hz;
+	uint32_t max_pll_op_freq_hz;
+
+	uint16_t min_vt_sys_clk_div;
+	uint16_t max_vt_sys_clk_div;
+	uint32_t min_vt_sys_clk_freq_hz;
+	uint32_t max_vt_sys_clk_freq_hz;
+	uint16_t min_vt_pix_clk_div;
+	uint16_t max_vt_pix_clk_div;
+	uint32_t min_vt_pix_clk_freq_hz;
+	uint32_t max_vt_pix_clk_freq_hz;
+
+	uint16_t min_op_sys_clk_div;
+	uint16_t max_op_sys_clk_div;
+	uint32_t min_op_sys_clk_freq_hz;
+	uint32_t max_op_sys_clk_freq_hz;
+	uint16_t min_op_pix_clk_div;
+	uint16_t max_op_pix_clk_div;
+	uint32_t min_op_pix_clk_freq_hz;
+	uint32_t max_op_pix_clk_freq_hz;
+
+	/* Other relevant limits */
+	uint32_t min_line_length_pck_bin;
+	uint32_t min_line_length_pck;
+};
+
+/* op pix clock is for all lanes in total normally */
+#define SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
+#define SMIAPP_PLL_FLAG_NO_OP_CLOCKS				(1 << 1)
+
+struct device;
+
+int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
+			 struct smiapp_pll *pll);
+
+#endif /* SMIAPP_PLL_H */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.2 34/35] smiapp: Generic SMIA++/SMIA PLL calculator
  2012-03-08 14:49         ` [PATCH v5.2 " Sakari Ailus
@ 2012-03-08 14:51           ` Laurent Pinchart
  0 siblings, 0 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-08 14:51 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

On Thursday 08 March 2012 16:49:14 Sakari Ailus wrote:
> From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
> 
> Calculate PLL configuration based on input data: sensor configuration, board
> properties and sensor-specific limits.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.1 35/35] smiapp: Add driver
  2012-03-07 12:26   ` Laurent Pinchart
  2012-03-08 13:29     ` Sakari Ailus
  2012-03-08 13:57     ` [PATCH v5.1 " Sakari Ailus
@ 2012-03-08 13:57     ` Sakari Ailus
  2012-03-08 14:46       ` Laurent Pinchart
  2012-03-08 15:06       ` [PATCH v5.1 " jean-philippe francois
  2 siblings, 2 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-08 13:57 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
three subdevs, pixel array, binner and scaler --- in case the device has a
scaler.

Currently it relies on the board code for external clock handling. There is
no fast way out of this dependency before the ISP drivers (omap3isp) among
others will be able to export that clock through the clock framework
instead.

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
---
 drivers/media/video/Kconfig                  |    2 +
 drivers/media/video/Makefile                 |    1 +
 drivers/media/video/smiapp-pll.c             |    2 +
 drivers/media/video/smiapp/Kconfig           |   13 +
 drivers/media/video/smiapp/Makefile          |    3 +
 drivers/media/video/smiapp/smiapp-core.c     | 2826 ++++++++++++++++++++++++++
 drivers/media/video/smiapp/smiapp-debug.h    |   32 +
 drivers/media/video/smiapp/smiapp-limits.c   |  132 ++
 drivers/media/video/smiapp/smiapp-limits.h   |  128 ++
 drivers/media/video/smiapp/smiapp-quirk.c    |  264 +++
 drivers/media/video/smiapp/smiapp-quirk.h    |   72 +
 drivers/media/video/smiapp/smiapp-reg-defs.h |  503 +++++
 drivers/media/video/smiapp/smiapp-reg.h      |  122 ++
 drivers/media/video/smiapp/smiapp-regs.c     |  213 ++
 drivers/media/video/smiapp/smiapp-regs.h     |   46 +
 drivers/media/video/smiapp/smiapp.h          |  251 +++
 include/media/smiapp.h                       |   83 +
 17 files changed, 4693 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/smiapp/Kconfig
 create mode 100644 drivers/media/video/smiapp/Makefile
 create mode 100644 drivers/media/video/smiapp/smiapp-core.c
 create mode 100644 drivers/media/video/smiapp/smiapp-debug.h
 create mode 100644 drivers/media/video/smiapp/smiapp-limits.c
 create mode 100644 drivers/media/video/smiapp/smiapp-limits.h
 create mode 100644 drivers/media/video/smiapp/smiapp-quirk.c
 create mode 100644 drivers/media/video/smiapp/smiapp-quirk.h
 create mode 100644 drivers/media/video/smiapp/smiapp-reg-defs.h
 create mode 100644 drivers/media/video/smiapp/smiapp-reg.h
 create mode 100644 drivers/media/video/smiapp/smiapp-regs.c
 create mode 100644 drivers/media/video/smiapp/smiapp-regs.h
 create mode 100644 drivers/media/video/smiapp/smiapp.h
 create mode 100644 include/media/smiapp.h

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 7eac873..1aaeb04 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -527,6 +527,8 @@ config VIDEO_S5K6AA
 	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
 	  camera sensor with an embedded SoC image signal processor.
 
+source "drivers/media/video/smiapp/Kconfig"
+
 comment "Flash devices"
 
 config VIDEO_ADP1653
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2fed63d..b74f15f 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
 obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
+obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp/
 obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
 
diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/video/smiapp-pll.c
index c8ffdc9..be7a543 100644
--- a/drivers/media/video/smiapp-pll.c
+++ b/drivers/media/video/smiapp-pll.c
@@ -22,6 +22,8 @@
  *
  */
 
+#include "smiapp/smiapp-debug.h"
+
 #include <linux/gcd.h>
 #include <linux/lcm.h>
 #include <linux/module.h>
diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig
new file mode 100644
index 0000000..9504c43
--- /dev/null
+++ b/drivers/media/video/smiapp/Kconfig
@@ -0,0 +1,13 @@
+config VIDEO_SMIAPP
+	tristate "SMIA++/SMIA sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	select VIDEO_SMIAPP_PLL
+	---help---
+	  This is a generic driver for SMIA++/SMIA camera modules.
+
+config VIDEO_SMIAPP_DEBUG
+	bool "Enable debugging for the generic SMIA++/SMIA driver"
+	depends on VIDEO_SMIAPP
+	---help---
+	  Enable debugging output in the generic SMIA++/SMIA driver. If you
+	  are developing the driver you might want to enable this.
diff --git a/drivers/media/video/smiapp/Makefile b/drivers/media/video/smiapp/Makefile
new file mode 100644
index 0000000..5a207ee
--- /dev/null
+++ b/drivers/media/video/smiapp/Makefile
@@ -0,0 +1,3 @@
+smiapp-objs			+= smiapp-core.o smiapp-regs.o \
+				   smiapp-quirk.o smiapp-limits.o
+obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp.o
diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c
new file mode 100644
index 0000000..2e8d125
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-core.c
@@ -0,0 +1,2826 @@
+/*
+ * drivers/media/video/smiapp/smiapp-core.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Based on smiapp driver by Vimarsh Zutshi
+ * Based on jt8ev1.c by Vimarsh Zutshi
+ * Based on smia-sensor.c by Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/v4l2-mediabus.h>
+#include <media/v4l2-device.h>
+
+#include "smiapp.h"
+
+#define SMIAPP_ALIGN_DIM(dim, flags)		\
+	((flags) & V4L2_SUBDEV_SEL_FLAG_SIZE_GE	\
+	 ? ALIGN((dim), 2)			\
+	 : (dim) & ~1)
+
+/*
+ * smiapp_module_idents - supported camera modules
+ */
+static const struct smiapp_module_ident smiapp_module_idents[] = {
+	SMIAPP_IDENT_L(0x01, 0x022b, -1, "vs6555"),
+	SMIAPP_IDENT_L(0x01, 0x022e, -1, "vw6558"),
+	SMIAPP_IDENT_L(0x07, 0x7698, -1, "ovm7698"),
+	SMIAPP_IDENT_L(0x0b, 0x4242, -1, "smiapp-003"),
+	SMIAPP_IDENT_L(0x0c, 0x208a, -1, "tcm8330md"),
+	SMIAPP_IDENT_LQ(0x0c, 0x2134, -1, "tcm8500md", &smiapp_tcm8500md_quirk),
+	SMIAPP_IDENT_L(0x0c, 0x213e, -1, "et8en2"),
+	SMIAPP_IDENT_L(0x0c, 0x2184, -1, "tcm8580md"),
+	SMIAPP_IDENT_LQ(0x0c, 0x560f, -1, "jt8ew9", &smiapp_jt8ew9_quirk),
+	SMIAPP_IDENT_LQ(0x10, 0x4141, -1, "jt8ev1", &smiapp_jt8ev1_quirk),
+	SMIAPP_IDENT_LQ(0x10, 0x4241, -1, "imx125es", &smiapp_imx125es_quirk),
+};
+
+/*
+ *
+ * Dynamic Capability Identification
+ *
+ */
+
+static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc;
+	unsigned int i;
+	int rval;
+	int line_count = 0;
+	int embedded_start = -1, embedded_end = -1;
+	int image_start = 0;
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE,
+			   &fmt_model_type);
+	if (rval)
+		return rval;
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE,
+			   &fmt_model_subtype);
+	if (rval)
+		return rval;
+
+	ncol_desc = (fmt_model_subtype
+		     & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK)
+		>> SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT;
+	nrow_desc = fmt_model_subtype
+		& SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK;
+
+	dev_dbg(&client->dev, "format_model_type %s\n",
+		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE
+		? "2 byte" :
+		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE
+		? "4 byte" : "is simply bad");
+
+	for (i = 0; i < ncol_desc + nrow_desc; i++) {
+		u32 desc;
+		u32 pixelcode;
+		u32 pixels;
+		char *which;
+		char *what;
+
+		if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i),
+				&desc);
+			if (rval)
+				return rval;
+
+			pixelcode =
+				(desc
+				 & SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK)
+				>> SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT;
+			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK;
+		} else if (fmt_model_type
+			   == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i),
+				&desc);
+			if (rval)
+				return rval;
+
+			pixelcode =
+				(desc
+				 & SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK)
+				>> SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT;
+			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK;
+		} else {
+			dev_dbg(&client->dev,
+				"invalid frame format model type %d\n",
+				fmt_model_type);
+			return -EINVAL;
+		}
+
+		if (i < ncol_desc)
+			which = "columns";
+		else
+			which = "rows";
+
+		switch (pixelcode) {
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED:
+			what = "embedded";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY:
+			what = "dummy";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK:
+			what = "black";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK:
+			what = "dark";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE:
+			what = "visible";
+			break;
+		default:
+			what = "invalid";
+			dev_dbg(&client->dev, "pixelcode %d\n", pixelcode);
+			break;
+		}
+
+		dev_dbg(&client->dev, "%s pixels: %d %s\n",
+			what, pixels, which);
+
+		if (i < ncol_desc)
+			continue;
+
+		/* Handle row descriptors */
+		if (pixelcode
+		    == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED) {
+			embedded_start = line_count;
+		} else {
+			if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE
+			    || pixels >= sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES] / 2)
+				image_start = line_count;
+			if (embedded_start != -1 && embedded_end == -1)
+				embedded_end = line_count;
+		}
+		line_count += pixels;
+	}
+
+	if (embedded_start == -1 || embedded_end == -1) {
+		embedded_start = 0;
+		embedded_end = 0;
+	}
+
+	dev_dbg(&client->dev, "embedded data from lines %d to %d\n",
+		embedded_start, embedded_end);
+	dev_dbg(&client->dev, "image data starts at line %d\n", image_start);
+
+	return 0;
+}
+
+static int smiapp_pll_configure(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_pll *pll = &sensor->pll;
+	int rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_VT_PIX_CLK_DIV, pll->vt_pix_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_VT_SYS_CLK_DIV, pll->vt_sys_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_PRE_PLL_CLK_DIV, pll->pre_pll_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_PLL_MULTIPLIER, pll->pll_multiplier);
+	if (rval < 0)
+		return rval;
+
+	/* Lane op clock ratio does not apply here. */
+	rval = smiapp_write(
+		client, SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS,
+		DIV_ROUND_UP(pll->op_sys_clk_freq_hz, 1000000 / 256 / 256));
+	if (rval < 0 || sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_OP_PIX_CLK_DIV, pll->op_pix_clk_div);
+	if (rval < 0)
+		return rval;
+
+	return smiapp_write(
+		client, SMIAPP_REG_U16_OP_SYS_CLK_DIV, pll->op_sys_clk_div);
+}
+
+static int smiapp_pll_update(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_pll_limits lim = {
+		.min_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV],
+		.max_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV],
+		.min_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ],
+		.max_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ],
+		.min_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MIN_PLL_MULTIPLIER],
+		.max_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MAX_PLL_MULTIPLIER],
+		.min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ],
+		.max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ],
+
+		.min_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV],
+		.max_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV],
+		.min_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV],
+		.max_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV],
+		.min_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ],
+		.max_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ],
+		.min_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ],
+		.max_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ],
+
+		.min_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV],
+		.max_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV],
+		.min_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV],
+		.max_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV],
+		.min_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ],
+		.max_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ],
+		.min_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ],
+		.max_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ],
+
+		.min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN],
+		.min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK],
+	};
+	struct smiapp_pll *pll = &sensor->pll;
+	int rval;
+
+	memset(&sensor->pll, 0, sizeof(sensor->pll));
+
+	pll->lanes = sensor->platform_data->lanes;
+	pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
+
+	if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) {
+		/*
+		 * Fill in operational clock divisors limits from the
+		 * video timing ones. On profile 0 sensors the
+		 * requirements regarding them are essentially the
+		 * same as on VT ones.
+		 */
+		lim.min_op_sys_clk_div = lim.min_vt_sys_clk_div;
+		lim.max_op_sys_clk_div = lim.max_vt_sys_clk_div;
+		lim.min_op_pix_clk_div = lim.min_vt_pix_clk_div;
+		lim.max_op_pix_clk_div = lim.max_vt_pix_clk_div;
+		lim.min_op_sys_clk_freq_hz = lim.min_vt_sys_clk_freq_hz;
+		lim.max_op_sys_clk_freq_hz = lim.max_vt_sys_clk_freq_hz;
+		lim.min_op_pix_clk_freq_hz = lim.min_vt_pix_clk_freq_hz;
+		lim.max_op_pix_clk_freq_hz = lim.max_vt_pix_clk_freq_hz;
+		/* Profile 0 sensors have no separate OP clock branch. */
+		pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
+	}
+
+	if (smiapp_needs_quirk(sensor,
+			       SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE))
+		pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
+
+	pll->binning_horizontal = sensor->binning_horizontal;
+	pll->binning_vertical = sensor->binning_vertical;
+	pll->link_freq =
+		sensor->link_freq->qmenu_int[sensor->link_freq->val];
+	pll->scale_m = sensor->scale_m;
+	pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+	pll->bits_per_pixel = sensor->csi_format->compressed;
+
+	rval = smiapp_pll_calculate(&client->dev, &lim, pll);
+	if (rval < 0)
+		return rval;
+
+	sensor->pixel_rate_parray->cur.val64 = pll->vt_pix_clk_freq_hz;
+	sensor->pixel_rate_csi->cur.val64 = pll->pixel_rate_csi;
+
+	return 0;
+}
+
+
+/*
+ *
+ * V4L2 Controls handling
+ *
+ */
+
+static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor)
+{
+	struct v4l2_ctrl *ctrl = sensor->exposure;
+	int max;
+
+	max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+		+ sensor->vblank->val
+		- sensor->limits[SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN];
+
+	ctrl->maximum = max;
+	if (ctrl->default_value > max)
+		ctrl->default_value = max;
+	if (ctrl->val > max)
+		ctrl->val = max;
+	if (ctrl->cur.val > max)
+		ctrl->cur.val = max;
+}
+
+/*
+ * Order matters.
+ *
+ * 1. Bits-per-pixel, descending.
+ * 2. Bits-per-pixel compressed, descending.
+ * 3. Pixel order, same as in pixel_order_str. Formats for all four pixel
+ *    orders must be defined.
+ */
+static const struct smiapp_csi_data_format smiapp_csi_data_formats[] = {
+	{ V4L2_MBUS_FMT_SGRBG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GBRG, },
+	{ V4L2_MBUS_FMT_SGRBG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GBRG, },
+	{ V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GBRG, },
+};
+
+const char *pixel_order_str[] = { "GRBG", "RGGB", "BGGR", "GBRG" };
+
+#define to_csi_format_idx(fmt) (((unsigned long)(fmt)			\
+				 - (unsigned long)smiapp_csi_data_formats) \
+				/ sizeof(*smiapp_csi_data_formats))
+
+static u32 smiapp_pixel_order(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int flip = 0;
+
+	if (sensor->hflip) {
+		if (sensor->hflip->val)
+			flip |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
+
+		if (sensor->vflip->val)
+			flip |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
+	}
+
+	flip ^= sensor->hvflip_inv_mask;
+
+	dev_dbg(&client->dev, "flip %d\n", flip);
+	return sensor->default_pixel_order ^ flip;
+}
+
+static void smiapp_update_mbus_formats(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int csi_format_idx =
+		to_csi_format_idx(sensor->csi_format) & ~3;
+	unsigned int internal_csi_format_idx =
+		to_csi_format_idx(sensor->internal_csi_format) & ~3;
+	unsigned int pixel_order = smiapp_pixel_order(sensor);
+
+	sensor->mbus_frame_fmts =
+		sensor->default_mbus_frame_fmts << pixel_order;
+	sensor->csi_format =
+		&smiapp_csi_data_formats[csi_format_idx + pixel_order];
+	sensor->internal_csi_format =
+		&smiapp_csi_data_formats[internal_csi_format_idx
+					 + pixel_order];
+
+	BUG_ON(max(internal_csi_format_idx, csi_format_idx) + pixel_order
+	       >= ARRAY_SIZE(smiapp_csi_data_formats));
+	BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0);
+
+	dev_dbg(&client->dev, "new pixel order %s\n",
+		pixel_order_str[pixel_order]);
+}
+
+static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct smiapp_sensor *sensor =
+		container_of(ctrl->handler, struct smiapp_subdev, ctrl_handler)
+			->sensor;
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 orient = 0;
+	int exposure;
+	int rval;
+
+	switch (ctrl->id) {
+	case V4L2_CID_ANALOGUE_GAIN:
+		return smiapp_write(
+			client,
+			SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL, ctrl->val);
+
+	case V4L2_CID_EXPOSURE:
+		return smiapp_write(
+			client,
+			SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val);
+
+	case V4L2_CID_HFLIP:
+	case V4L2_CID_VFLIP:
+		if (sensor->streaming)
+			return -EBUSY;
+
+		if (sensor->hflip->val)
+			orient |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
+
+		if (sensor->vflip->val)
+			orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
+
+		orient ^= sensor->hvflip_inv_mask;
+		rval = smiapp_write(client,
+				    SMIAPP_REG_U8_IMAGE_ORIENTATION,
+				    orient);
+		if (rval < 0)
+			return rval;
+
+		smiapp_update_mbus_formats(sensor);
+
+		return 0;
+
+	case V4L2_CID_VBLANK:
+		exposure = sensor->exposure->val;
+
+		__smiapp_update_exposure_limits(sensor);
+
+		if (exposure > sensor->exposure->maximum) {
+			sensor->exposure->val =
+				sensor->exposure->maximum;
+			rval = smiapp_set_ctrl(
+				sensor->exposure);
+			if (rval < 0)
+				return rval;
+		}
+
+		return smiapp_write(
+			client, SMIAPP_REG_U16_FRAME_LENGTH_LINES,
+			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+			+ ctrl->val);
+
+	case V4L2_CID_HBLANK:
+		return smiapp_write(
+			client, SMIAPP_REG_U16_LINE_LENGTH_PCK,
+			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
+			+ ctrl->val);
+
+	case V4L2_CID_LINK_FREQ:
+		if (sensor->streaming)
+			return -EBUSY;
+
+		return smiapp_pll_update(sensor);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct v4l2_ctrl_ops smiapp_ctrl_ops = {
+	.s_ctrl = smiapp_set_ctrl,
+};
+
+static int smiapp_init_controls(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct v4l2_ctrl_config cfg;
+	int rval;
+
+	rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 7);
+	if (rval)
+		return rval;
+	sensor->pixel_array->ctrl_handler.lock = &sensor->mutex;
+
+	sensor->analog_gain = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_ANALOGUE_GAIN,
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN],
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX],
+		max(sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP], 1U),
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN]);
+
+	/* Exposure limits will be updated soon, use just something here. */
+	sensor->exposure = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_EXPOSURE, 0, 0, 1, 0);
+
+	sensor->hflip = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_HFLIP, 0, 1, 1, 0);
+	sensor->vflip = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_VFLIP, 0, 1, 1, 0);
+
+	sensor->vblank = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_VBLANK, 0, 1, 1, 0);
+
+	if (sensor->vblank)
+		sensor->vblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
+	sensor->hblank = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_HBLANK, 0, 1, 1, 0);
+
+	if (sensor->hblank)
+		sensor->hblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
+	sensor->pixel_rate_parray = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
+
+	if (sensor->pixel_array->ctrl_handler.error) {
+		dev_err(&client->dev,
+			"pixel array controls initialization failed (%d)\n",
+			sensor->pixel_array->ctrl_handler.error);
+		rval = sensor->pixel_array->ctrl_handler.error;
+		goto error;
+	}
+
+	sensor->pixel_array->sd.ctrl_handler =
+		&sensor->pixel_array->ctrl_handler;
+
+	v4l2_ctrl_cluster(2, &sensor->hflip);
+
+	rval = v4l2_ctrl_handler_init(&sensor->src->ctrl_handler, 0);
+	if (rval)
+		goto error;
+	sensor->src->ctrl_handler.lock = &sensor->mutex;
+
+	memset(&cfg, 0, sizeof(cfg));
+
+	cfg.ops = &smiapp_ctrl_ops;
+	cfg.id = V4L2_CID_LINK_FREQ;
+	cfg.type = V4L2_CTRL_TYPE_INTEGER_MENU;
+	while (sensor->platform_data->op_sys_clock[cfg.max + 1])
+		cfg.max++;
+	cfg.qmenu_int = sensor->platform_data->op_sys_clock;
+
+	sensor->link_freq = v4l2_ctrl_new_custom(
+		&sensor->src->ctrl_handler, &cfg, NULL);
+
+	sensor->pixel_rate_csi = v4l2_ctrl_new_std(
+		&sensor->src->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
+
+	if (sensor->src->ctrl_handler.error) {
+		dev_err(&client->dev,
+			"src controls initialization failed (%d)\n",
+			sensor->src->ctrl_handler.error);
+		rval = sensor->src->ctrl_handler.error;
+		goto error;
+	}
+
+	sensor->src->sd.ctrl_handler =
+		&sensor->src->ctrl_handler;
+
+	return 0;
+
+error:
+	v4l2_ctrl_handler_free(&sensor->pixel_array->ctrl_handler);
+	v4l2_ctrl_handler_free(&sensor->src->ctrl_handler);
+
+	return rval;
+}
+
+static void smiapp_free_controls(struct smiapp_sensor *sensor)
+{
+	unsigned int i;
+
+	for (i = 0; i < sensor->ssds_used; i++)
+		v4l2_ctrl_handler_free(&sensor->ssds[i].ctrl_handler);
+}
+
+static int smiapp_get_limits(struct smiapp_sensor *sensor, int const *limit,
+			     unsigned int n)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int i;
+	u32 val;
+	int rval;
+
+	for (i = 0; i < n; i++) {
+		rval = smiapp_read(
+			client, smiapp_reg_limits[limit[i]].addr, &val);
+		if (rval)
+			return rval;
+		sensor->limits[limit[i]] = val;
+		dev_dbg(&client->dev, "0x%8.8x \"%s\" = %d, 0x%x\n",
+			smiapp_reg_limits[limit[i]].addr,
+			smiapp_reg_limits[limit[i]].what, val, val);
+	}
+
+	return 0;
+}
+
+static int smiapp_get_all_limits(struct smiapp_sensor *sensor)
+{
+	unsigned int i;
+	int rval;
+
+	for (i = 0; i < SMIAPP_LIMIT_LAST; i++) {
+		rval = smiapp_get_limits(sensor, &i, 1);
+		if (rval < 0)
+			return rval;
+	}
+
+	if (sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] == 0)
+		smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16);
+
+	return 0;
+}
+
+static int smiapp_get_limits_binning(struct smiapp_sensor *sensor)
+{
+	static u32 const limits[] = {
+		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN,
+		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN,
+		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN,
+		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN,
+		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN,
+	};
+	static u32 const limits_replace[] = {
+		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES,
+		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES,
+		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK,
+		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK,
+		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN,
+	};
+
+	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY] ==
+	    SMIAPP_BINNING_CAPABILITY_NO) {
+		unsigned int i;
+
+		for (i = 0; i < ARRAY_SIZE(limits); i++)
+			sensor->limits[limits[i]] =
+				sensor->limits[limits_replace[i]];
+
+		return 0;
+	}
+
+	return smiapp_get_limits(sensor, limits, ARRAY_SIZE(limits));
+}
+
+static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int type, n;
+	unsigned int i, pixel_order;
+	int rval;
+
+	rval = smiapp_read(
+		client, SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE, &type);
+	if (rval)
+		return rval;
+
+	dev_dbg(&client->dev, "data_format_model_type %d\n", type);
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_PIXEL_ORDER,
+			   &pixel_order);
+	if (rval)
+		return rval;
+
+	if (pixel_order >= ARRAY_SIZE(pixel_order_str)) {
+		dev_dbg(&client->dev, "bad pixel order %d\n", pixel_order);
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->dev, "pixel order %d (%s)\n", pixel_order,
+		pixel_order_str[pixel_order]);
+
+	switch (type) {
+	case SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL:
+		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N;
+		break;
+	case SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED:
+		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sensor->default_pixel_order = pixel_order;
+	sensor->mbus_frame_fmts = 0;
+
+	for (i = 0; i < n; i++) {
+		unsigned int fmt, j;
+
+		rval = smiapp_read(
+			client,
+			SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(i), &fmt);
+		if (rval)
+			return rval;
+
+		dev_dbg(&client->dev, "bpp %d, compressed %d\n",
+			fmt >> 8, (u8)fmt);
+
+		for (j = 0; j < ARRAY_SIZE(smiapp_csi_data_formats); j++) {
+			const struct smiapp_csi_data_format *f =
+				&smiapp_csi_data_formats[j];
+
+			if (f->pixel_order != SMIAPP_PIXEL_ORDER_GRBG)
+				continue;
+
+			if (f->width != fmt >> 8 || f->compressed != (u8)fmt)
+				continue;
+
+			dev_dbg(&client->dev, "jolly good! %d\n", j);
+
+			sensor->default_mbus_frame_fmts |= 1 << j;
+			if (!sensor->csi_format) {
+				sensor->csi_format = f;
+				sensor->internal_csi_format = f;
+			}
+		}
+	}
+
+	if (!sensor->csi_format) {
+		dev_err(&client->dev, "no supported mbus code found\n");
+		return -EINVAL;
+	}
+
+	smiapp_update_mbus_formats(sensor);
+
+	return 0;
+}
+
+static void smiapp_update_blanking(struct smiapp_sensor *sensor)
+{
+	struct v4l2_ctrl *vblank = sensor->vblank;
+	struct v4l2_ctrl *hblank = sensor->hblank;
+
+	vblank->minimum =
+		max_t(int,
+		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES],
+		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] -
+		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height);
+	vblank->maximum =
+		sensor->limits[SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN] -
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height;
+
+	vblank->val = clamp_t(int, vblank->val,
+			      vblank->minimum, vblank->maximum);
+	vblank->default_value = vblank->minimum;
+	vblank->val = vblank->val;
+	vblank->cur.val = vblank->val;
+
+	hblank->minimum =
+		max_t(int,
+		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] -
+		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width,
+		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]);
+	hblank->maximum =
+		sensor->limits[SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN] -
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width;
+
+	hblank->val = clamp_t(int, hblank->val,
+			      hblank->minimum, hblank->maximum);
+	hblank->default_value = hblank->minimum;
+	hblank->val = hblank->val;
+	hblank->cur.val = hblank->val;
+
+	__smiapp_update_exposure_limits(sensor);
+}
+
+static int smiapp_update_mode(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int binning_mode;
+	int rval;
+
+	dev_dbg(&client->dev, "frame size: %dx%d\n",
+		sensor->src->crop[SMIAPP_PAD_SRC].width,
+		sensor->src->crop[SMIAPP_PAD_SRC].height);
+	dev_dbg(&client->dev, "csi format width: %d\n",
+		sensor->csi_format->width);
+
+	/* Binning has to be set up here; it affects limits */
+	if (sensor->binning_horizontal == 1 &&
+	    sensor->binning_vertical == 1) {
+		binning_mode = 0;
+	} else {
+		u8 binning_type =
+			(sensor->binning_horizontal << 4)
+			| sensor->binning_vertical;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U8_BINNING_TYPE, binning_type);
+		if (rval < 0)
+			return rval;
+
+		binning_mode = 1;
+	}
+	rval = smiapp_write(client, SMIAPP_REG_U8_BINNING_MODE, binning_mode);
+	if (rval < 0)
+		return rval;
+
+	/* Get updated limits due to binning */
+	rval = smiapp_get_limits_binning(sensor);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_pll_update(sensor);
+	if (rval < 0)
+		return rval;
+
+	/* Output from pixel array, including blanking */
+	smiapp_update_blanking(sensor);
+
+	dev_dbg(&client->dev, "vblank\t\t%d\n", sensor->vblank->val);
+	dev_dbg(&client->dev, "hblank\t\t%d\n", sensor->hblank->val);
+
+	dev_dbg(&client->dev, "real timeperframe\t100/%d\n",
+		sensor->pll.vt_pix_clk_freq_hz /
+		((sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
+		  + sensor->hblank->val) *
+		 (sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+		  + sensor->vblank->val) / 100));
+
+	return 0;
+}
+
+/*
+ *
+ * SMIA++ NVM handling
+ *
+ */
+static int smiapp_read_nvm(struct smiapp_sensor *sensor,
+			   unsigned char *nvm)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 i, s, p, np, v;
+	int rval, rval2;
+
+	np = sensor->nvm_size / SMIAPP_NVM_PAGE_SIZE;
+	for (p = 0; p < np; p++) {
+		rval = smiapp_write(
+			client,
+			SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT, p);
+		if (rval)
+			goto out;
+
+		rval = smiapp_write(client,
+				    SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL,
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN |
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN);
+		if (rval)
+			goto out;
+
+		for (i = 0; i < 1000; i++) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s);
+
+			if (rval)
+				goto out;
+
+			if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY)
+				break;
+
+			if (--i == 0) {
+				rval = -ETIMEDOUT;
+				goto out;
+			}
+
+		}
+
+		for (i = 0; i < SMIAPP_NVM_PAGE_SIZE; i++) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 + i,
+				&v);
+			if (rval)
+				goto out;
+
+			*nvm++ = v;
+		}
+	}
+
+out:
+	rval2 = smiapp_write(client, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, 0);
+	if (rval < 0)
+		return rval;
+	else
+		return rval2;
+}
+
+/*
+ *
+ * SMIA++ CCI address control
+ *
+ */
+static int smiapp_change_cci_addr(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+	u32 val;
+
+	client->addr = sensor->platform_data->i2c_addr_dfl;
+
+	rval = smiapp_write(client,
+			    SMIAPP_REG_U8_CCI_ADDRESS_CONTROL,
+			    sensor->platform_data->i2c_addr_alt << 1);
+	if (rval)
+		return rval;
+
+	client->addr = sensor->platform_data->i2c_addr_alt;
+
+	/* verify addr change went ok */
+	rval = smiapp_read(client, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, &val);
+	if (rval)
+		return rval;
+
+	if (val != sensor->platform_data->i2c_addr_alt << 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ *
+ * SMIA++ Mode Control
+ *
+ */
+static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_flash_strobe_parms *strobe_setup;
+	unsigned int ext_freq = sensor->platform_data->ext_clk;
+	u32 tmp;
+	u32 strobe_adjustment;
+	u32 strobe_width_high_rs;
+	int rval;
+
+	strobe_setup = sensor->platform_data->strobe_setup;
+
+	/*
+	 * How to calculate registers related to strobe length. Please
+	 * do not change, or if you do at least know what you're
+	 * doing. :-)
+	 *
+	 * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> 2010-10-25
+	 *
+	 * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl
+	 *	/ EXTCLK freq [Hz]) * flash_strobe_adjustment
+	 *
+	 * tFlash_strobe_width_ctrl E N, [1 - 0xffff]
+	 * flash_strobe_adjustment E N, [1 - 0xff]
+	 *
+	 * The formula above is written as below to keep it on one
+	 * line:
+	 *
+	 * l / 10^6 = w / e * a
+	 *
+	 * Let's mark w * a by x:
+	 *
+	 * x = w * a
+	 *
+	 * Thus, we get:
+	 *
+	 * x = l * e / 10^6
+	 *
+	 * The strobe width must be at least as long as requested,
+	 * thus rounding upwards is needed.
+	 *
+	 * x = (l * e + 10^6 - 1) / 10^6
+	 * -----------------------------
+	 *
+	 * Maximum possible accuracy is wanted at all times. Thus keep
+	 * a as small as possible.
+	 *
+	 * Calculate a, assuming maximum w, with rounding upwards:
+	 *
+	 * a = (x + (2^16 - 1) - 1) / (2^16 - 1)
+	 * -------------------------------------
+	 *
+	 * Thus, we also get w, with that a, with rounding upwards:
+	 *
+	 * w = (x + a - 1) / a
+	 * -------------------
+	 *
+	 * To get limits:
+	 *
+	 * x E [1, (2^16 - 1) * (2^8 - 1)]
+	 *
+	 * Substituting maximum x to the original formula (with rounding),
+	 * the maximum l is thus
+	 *
+	 * (2^16 - 1) * (2^8 - 1) * 10^6 = l * e + 10^6 - 1
+	 *
+	 * l = (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / e
+	 * --------------------------------------------------
+	 *
+	 * flash_strobe_length must be clamped between 1 and
+	 * (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / EXTCLK freq.
+	 *
+	 * Then,
+	 *
+	 * flash_strobe_adjustment = ((flash_strobe_length *
+	 *	EXTCLK freq + 10^6 - 1) / 10^6 + (2^16 - 1) - 1) / (2^16 - 1)
+	 *
+	 * tFlash_strobe_width_ctrl = ((flash_strobe_length *
+	 *	EXTCLK freq + 10^6 - 1) / 10^6 +
+	 *	flash_strobe_adjustment - 1) / flash_strobe_adjustment
+	 */
+	tmp = div_u64(1000000ULL * ((1 << 16) - 1) * ((1 << 8) - 1) -
+		      1000000 + 1, ext_freq);
+	strobe_setup->strobe_width_high_us =
+		clamp_t(u32, strobe_setup->strobe_width_high_us, 1, tmp);
+
+	tmp = div_u64(((u64)strobe_setup->strobe_width_high_us * (u64)ext_freq +
+			1000000 - 1), 1000000ULL);
+	strobe_adjustment = (tmp + (1 << 16) - 1 - 1) / ((1 << 16) - 1);
+	strobe_width_high_rs = (tmp + strobe_adjustment - 1) /
+				strobe_adjustment;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_MODE_RS,
+			    strobe_setup->mode);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT,
+			    strobe_adjustment);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL,
+		strobe_width_high_rs);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL,
+			    strobe_setup->strobe_delay);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_FLASH_STROBE_START_POINT,
+			    strobe_setup->stobe_start_point);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_TRIGGER_RS,
+			    strobe_setup->trigger);
+
+out:
+	sensor->platform_data->strobe_setup->trigger = 0;
+
+	return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * Power management
+ */
+
+static int smiapp_power_on(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned sleep;
+	int rval;
+
+	rval = regulator_enable(sensor->vana);
+	if (rval) {
+		dev_err(&client->dev, "failed to enable vana regulator\n");
+		return rval;
+	}
+	usleep_range(1000, 1000);
+
+	rval = sensor->platform_data->set_xclk(&sensor->src->sd,
+					sensor->platform_data->ext_clk);
+	if (rval < 0) {
+		dev_dbg(&client->dev, "failed to set xclk\n");
+		goto out_xclk_fail;
+	}
+	usleep_range(1000, 1000);
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 1);
+
+	sleep = SMIAPP_RESET_DELAY(sensor->platform_data->ext_clk);
+	usleep_range(sleep, sleep);
+
+	/*
+	 * Failures to respond to the address change command have been noticed.
+	 * Those failures seem to be caused by the sensor requiring a longer
+	 * boot time than advertised. An additional 10ms delay seems to work
+	 * around the issue, but the SMIA++ I2C write retry hack makes the delay
+	 * unnecessary. The failures need to be investigated to find a proper
+	 * fix, and a delay will likely need to be added here if the I2C write
+	 * retry hack is reverted before the root cause of the boot time issue
+	 * is found.
+	 */
+
+	if (sensor->platform_data->i2c_addr_alt) {
+		rval = smiapp_change_cci_addr(sensor);
+		if (rval) {
+			dev_err(&client->dev, "cci address change error\n");
+			goto out_cci_addr_fail;
+		}
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_SOFTWARE_RESET,
+			    SMIAPP_SOFTWARE_RESET);
+	if (rval < 0) {
+		dev_err(&client->dev, "software reset failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	if (sensor->platform_data->i2c_addr_alt) {
+		rval = smiapp_change_cci_addr(sensor);
+		if (rval) {
+			dev_err(&client->dev, "cci address change error\n");
+			goto out_cci_addr_fail;
+		}
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_COMPRESSION_MODE,
+			    SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR);
+	if (rval) {
+		dev_err(&client->dev, "compression mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ,
+		sensor->platform_data->ext_clk / (1000000 / (1 << 8)));
+	if (rval) {
+		dev_err(&client->dev, "extclk frequency set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_CSI_LANE_MODE,
+			    sensor->platform_data->lanes - 1);
+	if (rval) {
+		dev_err(&client->dev, "csi lane mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FAST_STANDBY_CTRL,
+			    SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE);
+	if (rval) {
+		dev_err(&client->dev, "fast standby set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_CSI_SIGNALLING_MODE,
+			    sensor->platform_data->csi_signalling_mode);
+	if (rval) {
+		dev_err(&client->dev, "csi signalling mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	/* DPHY control done by sensor based on requested link rate */
+	rval = smiapp_write(client, SMIAPP_REG_U8_DPHY_CTRL,
+			    SMIAPP_DPHY_CTRL_UI);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_call_quirk(sensor, post_poweron);
+	if (rval) {
+		dev_err(&client->dev, "post_poweron quirks failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	/* Are we still initialising...? If yes, return here. */
+	if (!sensor->pixel_array)
+		return 0;
+
+	rval = v4l2_ctrl_handler_setup(
+		&sensor->pixel_array->ctrl_handler);
+	if (rval)
+		goto out_cci_addr_fail;
+
+	rval = v4l2_ctrl_handler_setup(&sensor->src->ctrl_handler);
+	if (rval)
+		goto out_cci_addr_fail;
+
+	mutex_lock(&sensor->mutex);
+	rval = smiapp_update_mode(sensor);
+	mutex_unlock(&sensor->mutex);
+	if (rval < 0)
+		goto out_cci_addr_fail;
+
+	return 0;
+
+out_cci_addr_fail:
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 0);
+	sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+
+out_xclk_fail:
+	regulator_disable(sensor->vana);
+	return rval;
+}
+
+static void smiapp_power_off(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	/*
+	 * Currently power/clock to lens are enable/disabled separately
+	 * but they are essentially the same signals. So if the sensor is
+	 * powered off while the lens is powered on the sensor does not
+	 * really see a power off and next time the cci address change
+	 * will fail. So do a soft reset explicitly here.
+	 */
+	if (sensor->platform_data->i2c_addr_alt)
+		smiapp_write(client,
+			     SMIAPP_REG_U8_SOFTWARE_RESET,
+			     SMIAPP_SOFTWARE_RESET);
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 0);
+	sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+	usleep_range(5000, 5000);
+	regulator_disable(sensor->vana);
+	sensor->streaming = 0;
+}
+
+static int smiapp_set_power(struct v4l2_subdev *subdev, int on)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ret = 0;
+
+	mutex_lock(&sensor->power_mutex);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0
+	 * to 0, update the power state.
+	 */
+	if (!sensor->power_count == !on)
+		goto out;
+
+	if (on) {
+		/* Power on and perform initialisation. */
+		ret = smiapp_power_on(sensor);
+		if (ret < 0)
+			goto out;
+	} else {
+		smiapp_power_off(sensor);
+	}
+
+	/* Update the power count. */
+	sensor->power_count += on ? 1 : -1;
+	WARN_ON(sensor->power_count < 0);
+
+out:
+	mutex_unlock(&sensor->power_mutex);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Video stream management
+ */
+
+static int smiapp_start_streaming(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_CSI_DATA_FORMAT,
+			    (sensor->csi_format->width << 8) |
+			    sensor->csi_format->compressed);
+	if (rval)
+		goto out;
+
+	rval = smiapp_pll_configure(sensor);
+	if (rval)
+		goto out;
+
+	/* Analog crop start coordinates */
+	rval = smiapp_write(client, SMIAPP_REG_U16_X_ADDR_START,
+			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_Y_ADDR_START,
+			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top);
+	if (rval < 0)
+		goto out;
+
+	/* Analog crop end coordinates */
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_X_ADDR_END,
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left
+		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width - 1);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_Y_ADDR_END,
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top
+		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height - 1);
+	if (rval < 0)
+		goto out;
+
+	/*
+	 * Output from pixel array, including blanking, is set using
+	 * controls below. No need to set here.
+	 */
+
+	/* Digital crop */
+	if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+	    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].left);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].top);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].width);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].height);
+		if (rval < 0)
+			goto out;
+	}
+
+	/* Scaling */
+	if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+	    != SMIAPP_SCALING_CAPABILITY_NONE) {
+		rval = smiapp_write(client, SMIAPP_REG_U16_SCALING_MODE,
+				    sensor->scaling_mode);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(client, SMIAPP_REG_U16_SCALE_M,
+				    sensor->scale_m);
+		if (rval < 0)
+			goto out;
+	}
+
+	/* Output size from sensor */
+	rval = smiapp_write(client, SMIAPP_REG_U16_X_OUTPUT_SIZE,
+			    sensor->src->crop[SMIAPP_PAD_SRC].width);
+	if (rval < 0)
+		goto out;
+	rval = smiapp_write(client, SMIAPP_REG_U16_Y_OUTPUT_SIZE,
+			    sensor->src->crop[SMIAPP_PAD_SRC].height);
+	if (rval < 0)
+		goto out;
+
+	if ((sensor->flash_capability &
+	     (SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE |
+	      SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) &&
+	    sensor->platform_data->strobe_setup != NULL &&
+	    sensor->platform_data->strobe_setup->trigger != 0) {
+		rval = smiapp_setup_flash_strobe(sensor);
+		if (rval)
+			goto out;
+	}
+
+	rval = smiapp_call_quirk(sensor, pre_streamon);
+	if (rval) {
+		dev_err(&client->dev, "pre_streamon quirks failed\n");
+		goto out;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_MODE_SELECT,
+			    SMIAPP_MODE_SELECT_STREAMING);
+
+out:
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static int smiapp_stop_streaming(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = smiapp_write(client, SMIAPP_REG_U8_MODE_SELECT,
+			    SMIAPP_MODE_SELECT_SOFTWARE_STANDBY);
+	if (rval)
+		goto out;
+
+	rval = smiapp_call_quirk(sensor, post_streamoff);
+	if (rval)
+		dev_err(&client->dev, "post_streamoff quirks failed\n");
+
+out:
+	mutex_unlock(&sensor->mutex);
+	return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev video operations
+ */
+
+static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	if (sensor->streaming == enable)
+		return 0;
+
+	if (enable) {
+		sensor->streaming = 1;
+		rval = smiapp_start_streaming(sensor);
+		if (rval < 0)
+			sensor->streaming = 0;
+	} else {
+		rval = smiapp_stop_streaming(sensor);
+		sensor->streaming = 0;
+	}
+
+	return rval;
+}
+
+static int smiapp_enum_mbus_code(struct v4l2_subdev *subdev,
+				 struct v4l2_subdev_fh *fh,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned i;
+	int idx = -1;
+	int rval = -EINVAL;
+
+	mutex_lock(&sensor->mutex);
+
+	dev_err(&client->dev, "subdev %s, pad %d, index %d\n",
+		subdev->name, code->pad, code->index);
+
+	if (subdev != &sensor->src->sd || code->pad != SMIAPP_PAD_SRC) {
+		if (code->index)
+			goto out;
+
+		code->code = sensor->internal_csi_format->code;
+		rval = 0;
+		goto out;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+		if (sensor->mbus_frame_fmts & (1 << i))
+			idx++;
+
+		if (idx == code->index) {
+			code->code = smiapp_csi_data_formats[i].code;
+			dev_err(&client->dev, "found index %d, i %d, code %x\n",
+				code->index, i, code->code);
+			rval = 0;
+			break;
+		}
+	}
+
+out:
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static u32 __smiapp_get_mbus_code(struct v4l2_subdev *subdev,
+				  unsigned int pad)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	if (subdev == &sensor->src->sd && pad == SMIAPP_PAD_SRC)
+		return sensor->csi_format->code;
+	else
+		return sensor->internal_csi_format->code;
+}
+
+static int __smiapp_get_format(struct v4l2_subdev *subdev,
+			       struct v4l2_subdev_fh *fh,
+			       struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad);
+	} else {
+		struct v4l2_rect *r;
+
+		if (fmt->pad == ssd->source_pad)
+			r = &ssd->crop[ssd->source_pad];
+		else
+			r = &ssd->sink_fmt;
+
+		fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
+		fmt->format.width = r->width;
+		fmt->format.height = r->height;
+		if (subdev == &sensor->src->sd && fmt->pad == SMIAPP_PAD_SRC)
+			fmt->format.code = sensor->csi_format->code;
+		else
+			fmt->format.code = sensor->internal_csi_format->code;
+	}
+
+	return 0;
+}
+
+static int smiapp_get_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = __smiapp_get_format(subdev, fh, fmt);
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static void smiapp_get_crop_compose(struct v4l2_subdev *subdev,
+				    struct v4l2_subdev_fh *fh,
+				    struct v4l2_rect **crops,
+				    struct v4l2_rect **comps, int which)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	unsigned i;
+
+	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		if (crops)
+			for (i = 0; i < subdev->entity.num_pads; i++)
+				crops[i] = &ssd->crop[i];
+		if (comps)
+			*comps = &ssd->compose;
+	} else {
+		if (crops) {
+			for (i = 0; i < subdev->entity.num_pads; i++) {
+				crops[i] = v4l2_subdev_get_try_crop(fh, i);
+				BUG_ON(!crops[i]);
+			}
+		}
+		if (comps) {
+			*comps = v4l2_subdev_get_try_compose(fh,
+							     SMIAPP_PAD_SINK);
+			BUG_ON(!*comps);
+		}
+	}
+}
+
+/* Changes require propagation only on sink pad. */
+static void smiapp_propagate(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh, int which,
+			     int target)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, which);
+
+	switch (target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+		comp->width = crops[SMIAPP_PAD_SINK]->width;
+		comp->height = crops[SMIAPP_PAD_SINK]->height;
+		if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+			if (ssd == sensor->scaler) {
+				sensor->scale_m =
+					sensor->limits[
+						SMIAPP_LIMIT_SCALER_N_MIN];
+				sensor->scaling_mode =
+					SMIAPP_SCALING_MODE_NONE;
+			} else if (ssd == sensor->binner) {
+				sensor->binning_horizontal = 1;
+				sensor->binning_vertical = 1;
+			}
+		}
+		/* Fall through */
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		*crops[SMIAPP_PAD_SRC] = *comp;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static int smiapp_set_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *crops[SMIAPP_PADS];
+	const struct smiapp_csi_data_format *csi_format = sensor->csi_format;
+	unsigned i;
+
+	mutex_lock(&sensor->mutex);
+
+	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
+
+	if (subdev == &sensor->src->sd && fmt->pad == SMIAPP_PAD_SRC) {
+		for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+			if (sensor->mbus_frame_fmts & (1 << i) &&
+			    smiapp_csi_data_formats[i].code
+			    == fmt->format.code) {
+				csi_format = &smiapp_csi_data_formats[i];
+				if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+					sensor->csi_format = csi_format;
+				break;
+			}
+		}
+	}
+
+	if (fmt->pad == ssd->source_pad) {
+		int rval;
+
+		rval = __smiapp_get_format(subdev, fh, fmt);
+		fmt->format.code = csi_format->code;
+
+		mutex_unlock(&sensor->mutex);
+		return rval;
+	}
+
+	fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
+	fmt->format.width &= ~1;
+	fmt->format.height &= ~1;
+
+	fmt->format.width =
+		clamp(fmt->format.width,
+		      sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
+		      sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
+	fmt->format.height =
+		clamp(fmt->format.height,
+		      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
+		      sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
+
+	crops[ssd->sink_pad]->left = 0;
+	crops[ssd->sink_pad]->top = 0;
+	crops[ssd->sink_pad]->width = fmt->format.width;
+	crops[ssd->sink_pad]->height = fmt->format.height;
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		ssd->sink_fmt = *crops[ssd->sink_pad];
+	smiapp_propagate(subdev, fh, fmt->which,
+			 V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
+
+	mutex_unlock(&sensor->mutex);
+
+	return 0;
+}
+
+/*
+ * Calculate goodness of scaled image size compared to expected image
+ * size and flags provided.
+ */
+#define SCALING_GOODNESS		100000
+#define SCALING_GOODNESS_EXTREME	100000000
+static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w,
+			    int h, int ask_h, u32 flags)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	int val = 0;
+
+	w &= ~1;
+	ask_w &= ~1;
+	h &= ~1;
+	ask_h &= ~1;
+
+	if (flags & V4L2_SUBDEV_SEL_FLAG_SIZE_GE) {
+		if (w < ask_w)
+			val -= SCALING_GOODNESS;
+		if (h < ask_h)
+			val -= SCALING_GOODNESS;
+	}
+
+	if (flags & V4L2_SUBDEV_SEL_FLAG_SIZE_LE) {
+		if (w > ask_w)
+			val -= SCALING_GOODNESS;
+		if (h > ask_h)
+			val -= SCALING_GOODNESS;
+	}
+
+	val -= abs(w - ask_w);
+	val -= abs(h - ask_h);
+
+	if (w < sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE])
+		val -= SCALING_GOODNESS_EXTREME;
+
+	dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n",
+		w, ask_h, h, ask_h, val);
+
+	return val;
+}
+
+static void smiapp_set_compose_binner(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_fh *fh,
+				      struct v4l2_subdev_selection *sel,
+				      struct v4l2_rect **crops,
+				      struct v4l2_rect *comp)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int i;
+	unsigned int binh = 1, binv = 1;
+	unsigned int best = scaling_goodness(
+		subdev,
+		crops[SMIAPP_PAD_SINK]->width, sel->r.width,
+		crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags);
+
+	for (i = 0; i < sensor->nbinning_subtypes; i++) {
+		int this = scaling_goodness(
+			subdev,
+			crops[SMIAPP_PAD_SINK]->width
+			/ sensor->binning_subtypes[i].horizontal,
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height
+			/ sensor->binning_subtypes[i].vertical,
+			sel->r.height, sel->flags);
+
+		if (this > best) {
+			binh = sensor->binning_subtypes[i].horizontal;
+			binv = sensor->binning_subtypes[i].vertical;
+			best = this;
+		}
+	}
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sensor->binning_vertical = binv;
+		sensor->binning_horizontal = binh;
+	}
+
+	sel->r.width = (crops[SMIAPP_PAD_SINK]->width / binh) & ~1;
+	sel->r.height = (crops[SMIAPP_PAD_SINK]->height / binv) & ~1;
+}
+
+/*
+ * Calculate best scaling ratio and mode for given output resolution.
+ *
+ * Try all of these: horizontal ratio, vertical ratio and smallest
+ * size possible (horizontally).
+ *
+ * Also try whether horizontal scaler or full scaler gives a better
+ * result.
+ */
+static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_fh *fh,
+				      struct v4l2_subdev_selection *sel,
+				      struct v4l2_rect **crops,
+				      struct v4l2_rect *comp)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	u32 min, max, a, b, max_m;
+	u32 scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+	int mode = SMIAPP_SCALING_MODE_HORIZONTAL;
+	u32 try[4];
+	u32 ntry = 0;
+	unsigned int i;
+	int best = INT_MIN;
+
+	sel->r.width = min_t(unsigned int, sel->r.width,
+			     crops[SMIAPP_PAD_SINK]->width);
+	sel->r.height = min_t(unsigned int, sel->r.height,
+			      crops[SMIAPP_PAD_SINK]->height);
+
+	a = crops[SMIAPP_PAD_SINK]->width
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.width;
+	b = crops[SMIAPP_PAD_SINK]->height
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.height;
+	max_m = crops[SMIAPP_PAD_SINK]->width
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]
+		/ sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE];
+
+	a = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		max(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	b = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		max(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	max_m = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		    max(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+
+	dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m);
+
+	min = min(max_m, min(a, b));
+	max = min(max_m, max(a, b));
+
+	try[ntry] = min;
+	ntry++;
+	if (min != max) {
+		try[ntry] = max;
+		ntry++;
+	}
+	if (max != max_m) {
+		try[ntry] = min + 1;
+		ntry++;
+		if (min != max) {
+			try[ntry] = max + 1;
+			ntry++;
+		}
+	}
+
+	for (i = 0; i < ntry; i++) {
+		int this = scaling_goodness(
+			subdev,
+			crops[SMIAPP_PAD_SINK]->width
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height,
+			sel->r.height,
+			sel->flags);
+
+		dev_dbg(&client->dev, "trying factor %d (%d)\n", try[i], i);
+
+		if (this > best) {
+			scale_m = try[i];
+			mode = SMIAPP_SCALING_MODE_HORIZONTAL;
+			best = this;
+		}
+
+		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
+			continue;
+
+		this = scaling_goodness(
+			subdev, crops[SMIAPP_PAD_SINK]->width
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.height,
+			sel->flags);
+
+		if (this > best) {
+			scale_m = try[i];
+			mode = SMIAPP_SCALING_MODE_BOTH;
+			best = this;
+		}
+	}
+
+	sel->r.width =
+		(crops[SMIAPP_PAD_SINK]->width
+		 / scale_m
+		 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) & ~1;
+	if (mode == SMIAPP_SCALING_MODE_BOTH)
+		sel->r.height =
+			(crops[SMIAPP_PAD_SINK]->height
+			 / scale_m
+			 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN])
+			& ~1;
+	else
+		sel->r.height = crops[SMIAPP_PAD_SINK]->height;
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sensor->scale_m = scale_m;
+		sensor->scaling_mode = mode;
+	}
+}
+/* We're only called on source pads. This function sets scaling. */
+static int smiapp_set_compose(struct v4l2_subdev *subdev,
+			      struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
+
+	sel->r.top = 0;
+	sel->r.left = 0;
+
+	if (ssd == sensor->binner)
+		smiapp_set_compose_binner(subdev, fh, sel, crops, comp);
+	else
+		smiapp_set_compose_scaler(subdev, fh, sel, crops, comp);
+
+	*comp = sel->r;
+	smiapp_propagate(subdev, fh, sel->which,
+			 V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		return smiapp_update_mode(sensor);
+
+	return 0;
+}
+
+static int __smiapp_sel_supported(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+
+	/* We only implement crop in three places. */
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS:
+		if (ssd == sensor->pixel_array
+		    && sel->pad == SMIAPP_PA_PAD_SRC)
+			return 0;
+		if (ssd == sensor->src
+		    && sel->pad == SMIAPP_PAD_SRC)
+			return 0;
+		if (ssd == sensor->scaler
+		    && sel->pad == SMIAPP_PAD_SINK
+		    && sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+		    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP)
+			return 0;
+		return -EINVAL;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
+		if (sel->pad == ssd->source_pad)
+			return -EINVAL;
+		if (ssd == sensor->binner)
+			return 0;
+		if (ssd == sensor->scaler
+		    && sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    != SMIAPP_SCALING_CAPABILITY_NONE)
+			return 0;
+		/* Fall through */
+	default:
+		return -EINVAL;
+	}
+}
+
+static int smiapp_set_crop(struct v4l2_subdev *subdev,
+			   struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *src_size, *crops[SMIAPP_PADS];
+	struct v4l2_rect _r;
+
+	smiapp_get_crop_compose(subdev, fh, crops, NULL, sel->which);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		if (sel->pad == ssd->sink_pad)
+			src_size = &ssd->sink_fmt;
+		else
+			src_size = &ssd->compose;
+	} else {
+		if (sel->pad == ssd->sink_pad) {
+			_r.left = 0;
+			_r.top = 0;
+			_r.width = v4l2_subdev_get_try_format(fh, sel->pad)
+				->width;
+			_r.height = v4l2_subdev_get_try_format(fh, sel->pad)
+				->height;
+			src_size = &_r;
+		} else {
+			src_size =
+				v4l2_subdev_get_try_compose(
+					fh, ssd->sink_pad);
+		}
+	}
+
+	if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) {
+		sel->r.left = 0;
+		sel->r.top = 0;
+	}
+
+	sel->r.width = min(sel->r.width, src_size->width);
+	sel->r.height = min(sel->r.height, src_size->height);
+
+	sel->r.left = min(sel->r.left, src_size->width - sel->r.width);
+	sel->r.top = min(sel->r.top, src_size->height - sel->r.height);
+
+	*crops[sel->pad] = sel->r;
+
+	if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK)
+		smiapp_propagate(subdev, fh, sel->which,
+				 V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
+
+	return 0;
+}
+
+static int __smiapp_get_selection(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+	struct v4l2_rect sink_fmt;
+	int ret;
+
+	ret = __smiapp_sel_supported(subdev, sel);
+	if (ret)
+		return ret;
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sink_fmt = ssd->sink_fmt;
+	} else {
+		struct v4l2_mbus_framefmt *fmt =
+			v4l2_subdev_get_try_format(fh, ssd->sink_pad);
+
+		sink_fmt.left = 0;
+		sink_fmt.top = 0;
+		sink_fmt.width = fmt->width;
+		sink_fmt.height = fmt->height;
+	}
+
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS:
+		if (ssd == sensor->pixel_array) {
+			sel->r.width =
+				sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+			sel->r.height =
+				sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		} else if (sel->pad == ssd->sink_pad) {
+			sel->r = sink_fmt;
+		} else {
+			sel->r = *comp;
+		}
+		break;
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
+		sel->r = *crops[sel->pad];
+		break;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		sel->r = *comp;
+		break;
+	}
+
+	return 0;
+}
+
+static int smiapp_get_selection(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = __smiapp_get_selection(subdev, fh, sel);
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+static int smiapp_set_selection(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ret;
+
+	ret = __smiapp_sel_supported(subdev, sel);
+	if (ret)
+		return ret;
+
+	mutex_lock(&sensor->mutex);
+
+	sel->r.left = max(0, sel->r.left & ~1);
+	sel->r.top = max(0, sel->r.top & ~1);
+	sel->r.width = max(0, SMIAPP_ALIGN_DIM(sel->r.width, sel->flags));
+	sel->r.height = max(0, SMIAPP_ALIGN_DIM(sel->r.height, sel->flags));
+
+	sel->r.width = max_t(unsigned int,
+			     sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
+			     sel->r.width);
+	sel->r.height = max_t(unsigned int,
+			      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
+			      sel->r.height);
+
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+		ret = smiapp_set_crop(subdev, fh, sel);
+		break;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		ret = smiapp_set_compose(subdev, fh, sel);
+		break;
+	default:
+		BUG();
+	}
+
+	mutex_unlock(&sensor->mutex);
+	return ret;
+}
+
+static int smiapp_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	*frames = sensor->frame_skip;
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * sysfs attributes
+ */
+
+static ssize_t
+smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
+		      char *buf)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int nbytes;
+
+	if (!sensor->dev_init_done)
+		return -EBUSY;
+
+	if (!sensor->nvm_size) {
+		/* NVM not read yet - read it now */
+		sensor->nvm_size = sensor->platform_data->nvm_size;
+		if (smiapp_set_power(subdev, 1) < 0)
+			return -ENODEV;
+		if (smiapp_read_nvm(sensor, sensor->nvm)) {
+			dev_err(&client->dev, "nvm read failed\n");
+			return -ENODEV;
+		}
+		smiapp_set_power(subdev, 0);
+	}
+	/*
+	 * NVM is still way below a PAGE_SIZE, so we can safely
+	 * assume this for now.
+	 */
+	nbytes = min_t(unsigned int, sensor->nvm_size, PAGE_SIZE);
+	memcpy(buf, sensor->nvm, nbytes);
+
+	return nbytes;
+}
+static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL);
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev core operations
+ */
+
+static int smiapp_identify_module(struct v4l2_subdev *subdev)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_module_info *minfo = &sensor->minfo;
+	unsigned int i;
+	int rval = 0;
+
+	minfo->name = SMIAPP_NAME;
+
+	/* Module info */
+	rval = smiapp_read(client, SMIAPP_REG_U8_MANUFACTURER_ID,
+			   &minfo->manufacturer_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U16_MODEL_ID,
+				   &minfo->model_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_REVISION_NUMBER_MAJOR,
+				   &minfo->revision_number_major);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_REVISION_NUMBER_MINOR,
+				   &minfo->revision_number_minor);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_YEAR,
+				   &minfo->module_year);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_MONTH,
+				   &minfo->module_month);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_DAY,
+				   &minfo->module_day);
+
+	/* Sensor info */
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID,
+				   &minfo->sensor_manufacturer_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U16_SENSOR_MODEL_ID,
+				   &minfo->sensor_model_id);
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_REVISION_NUMBER,
+				   &minfo->sensor_revision_number);
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION,
+				   &minfo->sensor_firmware_version);
+
+	/* SMIA */
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_SMIA_VERSION,
+				   &minfo->smia_version);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_SMIAPP_VERSION,
+				   &minfo->smiapp_version);
+
+	if (rval) {
+		dev_err(&client->dev, "sensor detection failed\n");
+		return -ENODEV;
+	}
+
+	dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n",
+		minfo->manufacturer_id, minfo->model_id);
+
+	dev_dbg(&client->dev,
+		"module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n",
+		minfo->revision_number_major, minfo->revision_number_minor,
+		minfo->module_year, minfo->module_month, minfo->module_day);
+
+	dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n",
+		minfo->sensor_manufacturer_id, minfo->sensor_model_id);
+
+	dev_dbg(&client->dev,
+		"sensor revision 0x%2.2x firmware version 0x%2.2x\n",
+		minfo->sensor_revision_number, minfo->sensor_firmware_version);
+
+	dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n",
+		minfo->smia_version, minfo->smiapp_version);
+
+	/*
+	 * Some modules have bad data in the lvalues below. Hope the
+	 * rvalues have better stuff. The lvalues are module
+	 * parameters whereas the rvalues are sensor parameters.
+	 */
+	if (!minfo->manufacturer_id && !minfo->model_id) {
+		minfo->manufacturer_id = minfo->sensor_manufacturer_id;
+		minfo->model_id = minfo->sensor_model_id;
+		minfo->revision_number_major = minfo->sensor_revision_number;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) {
+		if (smiapp_module_idents[i].manufacturer_id
+		    != minfo->manufacturer_id)
+			continue;
+		if (smiapp_module_idents[i].model_id != minfo->model_id)
+			continue;
+		if (smiapp_module_idents[i].flags
+		    & SMIAPP_MODULE_IDENT_FLAG_REV_LE) {
+			if (smiapp_module_idents[i].revision_number_major
+			    < minfo->revision_number_major)
+				continue;
+		} else {
+			if (smiapp_module_idents[i].revision_number_major
+			    != minfo->revision_number_major)
+				continue;
+		}
+
+		minfo->name = smiapp_module_idents[i].name;
+		minfo->quirk = smiapp_module_idents[i].quirk;
+		break;
+	}
+
+	if (i >= ARRAY_SIZE(smiapp_module_idents))
+		dev_warn(&client->dev,
+			 "no quirks for this module; let's hope it's fully compliant\n");
+
+	dev_dbg(&client->dev, "the sensor is called %s, ident %2.2x%4.4x%2.2x\n",
+		minfo->name, minfo->manufacturer_id, minfo->model_id,
+		minfo->revision_number_major);
+
+	strlcpy(subdev->name, sensor->minfo.name, sizeof(subdev->name));
+
+	return 0;
+}
+
+static const struct v4l2_subdev_ops smiapp_ops;
+static const struct v4l2_subdev_internal_ops smiapp_internal_ops;
+static const struct media_entity_operations smiapp_entity_ops;
+
+static int smiapp_registered(struct v4l2_subdev *subdev)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_subdev *last = NULL;
+	u32 tmp;
+	unsigned int i;
+	int rval;
+
+	sensor->vana = regulator_get(&client->dev, "VANA");
+	if (IS_ERR(sensor->vana)) {
+		dev_err(&client->dev, "could not get regulator for vana\n");
+		return -ENODEV;
+	}
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) {
+		if (gpio_request_one(sensor->platform_data->xshutdown, 0,
+				     "SMIA++ xshutdown") != 0) {
+			dev_err(&client->dev,
+				"unable to acquire reset gpio %d\n",
+				sensor->platform_data->xshutdown);
+			rval = -ENODEV;
+			goto out_gpio_request;
+		}
+	}
+
+	rval = smiapp_power_on(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_smiapp_power_on;
+	}
+
+	rval = smiapp_identify_module(subdev);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	rval = smiapp_get_all_limits(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	/*
+	 * Handle Sensor Module orientation on the board.
+	 *
+	 * The application of H-FLIP and V-FLIP on the sensor is modified by
+	 * the sensor orientation on the board.
+	 *
+	 * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set
+	 * both H-FLIP and V-FLIP for normal operation which also implies
+	 * that a set/unset operation for user space HFLIP and VFLIP v4l2
+	 * controls will need to be internally inverted.
+	 *
+	 * Rotation also changes the bayer pattern.
+	 */
+	if (sensor->platform_data->module_board_orient ==
+	    SMIAPP_MODULE_BOARD_ORIENT_180)
+		sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP |
+					  SMIAPP_IMAGE_ORIENTATION_VFLIP;
+
+	rval = smiapp_get_mbus_formats(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) {
+		u32 val;
+
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_BINNING_SUBTYPES, &val);
+		if (rval < 0) {
+			rval = -ENODEV;
+			goto out_power_off;
+		}
+		sensor->nbinning_subtypes = min_t(u8, val,
+						  SMIAPP_BINNING_SUBTYPES);
+
+		for (i = 0; i < sensor->nbinning_subtypes; i++) {
+			rval = smiapp_read(
+				client, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val);
+			if (rval < 0) {
+				rval = -ENODEV;
+				goto out_power_off;
+			}
+			sensor->binning_subtypes[i] =
+				*(struct smiapp_binning_subtype *)&val;
+
+			dev_dbg(&client->dev, "binning %xx%x\n",
+				sensor->binning_subtypes[i].horizontal,
+				sensor->binning_subtypes[i].vertical);
+		}
+	}
+	sensor->binning_horizontal = 1;
+	sensor->binning_vertical = 1;
+
+	/* SMIA++ NVM initialization - it will be read from the sensor
+	 * when it is first requested by userspace.
+	 */
+	if (sensor->minfo.smiapp_version && sensor->platform_data->nvm_size) {
+		sensor->nvm = kzalloc(sensor->platform_data->nvm_size,
+				      GFP_KERNEL);
+		if (sensor->nvm == NULL) {
+			dev_err(&client->dev, "nvm buf allocation failed\n");
+			rval = -ENOMEM;
+			goto out_power_off;
+		}
+
+		if (device_create_file(&client->dev, &dev_attr_nvm) != 0) {
+			dev_err(&client->dev, "sysfs nvm entry failed\n");
+			rval = -EBUSY;
+			goto out_power_off;
+		}
+	}
+
+	rval = smiapp_call_quirk(sensor, limits);
+	if (rval) {
+		dev_err(&client->dev, "limits quirks failed\n");
+		goto out_nvm_release;
+	}
+
+	/* We consider this as profile 0 sensor if any of these are zero. */
+	if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) {
+		sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0;
+	} else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		   != SMIAPP_SCALING_CAPABILITY_NONE) {
+		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
+			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1;
+		else
+			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2;
+		sensor->scaler = &sensor->ssds[sensor->ssds_used];
+		sensor->ssds_used++;
+	} else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+		   == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
+		sensor->scaler = &sensor->ssds[sensor->ssds_used];
+		sensor->ssds_used++;
+	}
+	sensor->binner = &sensor->ssds[sensor->ssds_used];
+	sensor->ssds_used++;
+	sensor->pixel_array = &sensor->ssds[sensor->ssds_used];
+	sensor->ssds_used++;
+
+	sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+
+	for (i = 0; i < SMIAPP_SUBDEVS; i++) {
+		struct {
+			struct smiapp_subdev *ssd;
+			char *name;
+		} const __this[] = {
+			{ sensor->scaler, "scaler", },
+			{ sensor->binner, "binner", },
+			{ sensor->pixel_array, "pixel array", },
+		}, *_this = &__this[i];
+		struct smiapp_subdev *this = _this->ssd;
+
+		if (!this)
+			continue;
+
+		if (this != sensor->src)
+			v4l2_subdev_init(&this->sd, &smiapp_ops);
+
+		this->sensor = sensor;
+
+		if (this == sensor->pixel_array) {
+			this->npads = 1;
+		} else {
+			this->npads = 2;
+			this->source_pad = 1;
+		}
+
+		snprintf(this->sd.name,
+			 sizeof(this->sd.name), "%s %s",
+			 sensor->minfo.name, _this->name);
+
+		this->sink_fmt.width =
+			sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+		this->sink_fmt.height =
+			sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		this->compose.width = this->sink_fmt.width;
+		this->compose.height = this->sink_fmt.height;
+		this->crop[this->source_pad] = this->compose;
+		this->pads[this->source_pad].flags = MEDIA_PAD_FL_SOURCE;
+		if (this != sensor->pixel_array) {
+			this->crop[this->sink_pad] = this->compose;
+			this->pads[this->sink_pad].flags = MEDIA_PAD_FL_SINK;
+		}
+
+		this->sd.entity.ops = &smiapp_entity_ops;
+
+		if (last == NULL) {
+			last = this;
+			continue;
+		}
+
+		this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+		this->sd.internal_ops = &smiapp_internal_ops;
+		this->sd.owner = NULL;
+		v4l2_set_subdevdata(&this->sd, client);
+
+		rval = media_entity_init(&this->sd.entity,
+					 this->npads, this->pads, 0);
+		if (rval) {
+			dev_err(&client->dev,
+				"media_entity_init failed\n");
+			goto out_nvm_release;
+		}
+
+		rval = media_entity_create_link(&this->sd.entity,
+						this->source_pad,
+						&last->sd.entity,
+						last->sink_pad,
+						MEDIA_LNK_FL_ENABLED |
+						MEDIA_LNK_FL_IMMUTABLE);
+		if (rval) {
+			dev_err(&client->dev,
+				"media_entity_create_link failed\n");
+			goto out_nvm_release;
+		}
+
+		rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev,
+						   &this->sd);
+		if (rval) {
+			dev_err(&client->dev,
+				"v4l2_device_register_subdev failed\n");
+			goto out_nvm_release;
+		}
+
+		last = this;
+	}
+
+	dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile);
+
+	sensor->pixel_array->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+
+	/* final steps */
+	smiapp_read_frame_fmt(sensor);
+	rval = smiapp_init_controls(sensor);
+	if (rval < 0)
+		goto out_nvm_release;
+
+	rval = smiapp_update_mode(sensor);
+	if (rval) {
+		dev_err(&client->dev, "update mode failed\n");
+		goto out_nvm_release;
+	}
+
+	sensor->streaming = false;
+	sensor->dev_init_done = true;
+
+	/* check flash capability */
+	rval = smiapp_read(client, SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, &tmp);
+	sensor->flash_capability = tmp;
+	if (rval)
+		goto out_nvm_release;
+
+	smiapp_power_off(sensor);
+
+	return 0;
+
+out_nvm_release:
+	device_remove_file(&client->dev, &dev_attr_nvm);
+
+out_power_off:
+	kfree(sensor->nvm);
+	sensor->nvm = NULL;
+	smiapp_power_off(sensor);
+
+out_smiapp_power_on:
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_free(sensor->platform_data->xshutdown);
+
+out_gpio_request:
+	regulator_put(sensor->vana);
+	sensor->vana = NULL;
+	return rval;
+}
+
+static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(sd);
+	struct smiapp_sensor *sensor = ssd->sensor;
+	u32 mbus_code =
+		smiapp_csi_data_formats[smiapp_pixel_order(sensor)].code;
+	unsigned int i;
+
+	mutex_lock(&sensor->mutex);
+
+	for (i = 0; i < ssd->npads; i++) {
+		struct v4l2_mbus_framefmt *try_fmt =
+			v4l2_subdev_get_try_format(fh, i);
+		struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(fh, i);
+		struct v4l2_rect *try_comp;
+
+		try_fmt->width = sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+		try_fmt->height = sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		try_fmt->code = mbus_code;
+
+		try_crop->top = 0;
+		try_crop->left = 0;
+		try_crop->width = try_fmt->width;
+		try_crop->height = try_fmt->height;
+
+		if (ssd != sensor->pixel_array)
+			continue;
+
+		try_comp = v4l2_subdev_get_try_compose(fh, i);
+		*try_comp = *try_crop;
+	}
+
+	mutex_unlock(&sensor->mutex);
+
+	return smiapp_set_power(sd, 1);
+}
+
+static int smiapp_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	return smiapp_set_power(sd, 0);
+}
+
+static const struct v4l2_subdev_video_ops smiapp_video_ops = {
+	.s_stream = smiapp_set_stream,
+};
+
+static const struct v4l2_subdev_core_ops smiapp_core_ops = {
+	.s_power = smiapp_set_power,
+};
+
+static const struct v4l2_subdev_pad_ops smiapp_pad_ops = {
+	.enum_mbus_code = smiapp_enum_mbus_code,
+	.get_fmt = smiapp_get_format,
+	.set_fmt = smiapp_set_format,
+	.get_selection = smiapp_get_selection,
+	.set_selection = smiapp_set_selection,
+};
+
+static const struct v4l2_subdev_sensor_ops smiapp_sensor_ops = {
+	.g_skip_frames = smiapp_get_skip_frames,
+};
+
+static const struct v4l2_subdev_ops smiapp_ops = {
+	.core = &smiapp_core_ops,
+	.video = &smiapp_video_ops,
+	.pad = &smiapp_pad_ops,
+	.sensor = &smiapp_sensor_ops,
+};
+
+static const struct media_entity_operations smiapp_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = {
+	.registered = smiapp_registered,
+	.open = smiapp_open,
+	.close = smiapp_close,
+};
+
+static const struct v4l2_subdev_internal_ops smiapp_internal_ops = {
+	.open = smiapp_open,
+	.close = smiapp_close,
+};
+
+/* -----------------------------------------------------------------------------
+ * I2C Driver
+ */
+
+#ifdef CONFIG_PM
+
+static int smiapp_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	bool streaming;
+
+	BUG_ON(mutex_is_locked(&sensor->mutex));
+
+	if (sensor->power_count == 0)
+		return 0;
+
+	if (sensor->streaming)
+		smiapp_stop_streaming(sensor);
+
+	streaming = sensor->streaming;
+
+	smiapp_power_off(sensor);
+
+	/* save state for resume */
+	sensor->streaming = streaming;
+
+	return 0;
+}
+
+static int smiapp_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	if (sensor->power_count == 0)
+		return 0;
+
+	rval = smiapp_power_on(sensor);
+	if (rval)
+		return rval;
+
+	if (sensor->streaming)
+		rval = smiapp_start_streaming(sensor);
+
+	return rval;
+}
+
+#else
+
+#define smiapp_suspend	NULL
+#define smiapp_resume	NULL
+
+#endif /* CONFIG_PM */
+
+static int smiapp_probe(struct i2c_client *client,
+			const struct i2c_device_id *devid)
+{
+	struct smiapp_sensor *sensor;
+	int rval;
+
+	if (client->dev.platform_data == NULL)
+		return -ENODEV;
+
+	sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
+	if (sensor == NULL)
+		return -ENOMEM;
+
+	sensor->platform_data = client->dev.platform_data;
+	mutex_init(&sensor->mutex);
+	mutex_init(&sensor->power_mutex);
+	sensor->src = &sensor->ssds[sensor->ssds_used];
+
+	v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops);
+	sensor->src->sd.internal_ops = &smiapp_internal_src_ops;
+	sensor->src->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sensor->src->sensor = sensor;
+
+	sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE;
+	rval = media_entity_init(&sensor->src->sd.entity, 2,
+				 sensor->src->pads, 0);
+	if (rval < 0)
+		kfree(sensor);
+
+	return rval;
+}
+
+static int __exit smiapp_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int i;
+
+	if (sensor->power_count) {
+		if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+			gpio_set_value(sensor->platform_data->xshutdown, 0);
+		sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+		sensor->power_count = 0;
+	}
+
+	if (sensor->nvm) {
+		device_remove_file(&client->dev, &dev_attr_nvm);
+		kfree(sensor->nvm);
+	}
+
+	for (i = 0; i < sensor->ssds_used; i++) {
+		media_entity_cleanup(&sensor->ssds[i].sd.entity);
+		v4l2_device_unregister_subdev(&sensor->ssds[i].sd);
+	}
+	smiapp_free_controls(sensor);
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_free(sensor->platform_data->xshutdown);
+	if (sensor->vana)
+		regulator_put(sensor->vana);
+
+	kfree(sensor);
+
+	return 0;
+}
+
+static const struct i2c_device_id smiapp_id_table[] = {
+	{ SMIAPP_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, smiapp_id_table);
+
+static const struct dev_pm_ops smiapp_pm_ops = {
+	.suspend	= smiapp_suspend,
+	.resume		= smiapp_resume,
+};
+
+static struct i2c_driver smiapp_i2c_driver = {
+	.driver	= {
+		.name = SMIAPP_NAME,
+		.pm = &smiapp_pm_ops,
+	},
+	.probe	= smiapp_probe,
+	.remove	= __exit_p(smiapp_remove),
+	.id_table = smiapp_id_table,
+};
+
+module_i2c_driver(smiapp_i2c_driver);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
+MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp/smiapp-debug.h b/drivers/media/video/smiapp/smiapp-debug.h
new file mode 100644
index 0000000..627809e
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-debug.h
@@ -0,0 +1,32 @@
+/*
+ * drivers/media/video/smiapp/smiapp-debug.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_DEBUG_H
+#define SMIAPP_DEBUG_H
+
+#ifdef CONFIG_VIDEO_SMIAPP_DEBUG
+#define DEBUG
+#endif
+
+#endif
diff --git a/drivers/media/video/smiapp/smiapp-limits.c b/drivers/media/video/smiapp/smiapp-limits.c
new file mode 100644
index 0000000..0800e09
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-limits.c
@@ -0,0 +1,132 @@
+/*
+ * drivers/media/video/smiapp/smiapp-limits.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp.h"
+
+struct smiapp_reg_limits smiapp_reg_limits[] = {
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY, "analogue_gain_capability" }, /* 0 */
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN, "analogue_gain_code_min" },
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX, "analogue_gain_code_max" },
+	{ SMIAPP_REG_U8_THS_ZERO_MIN, "ths_zero_min" },
+	{ SMIAPP_REG_U8_TCLK_TRAIL_MIN, "tclk_trail_min" },
+	{ SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY, "integration_time_capability" }, /* 5 */
+	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN, "coarse_integration_time_min" },
+	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN, "coarse_integration_time_max_margin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN, "fine_integration_time_min" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN, "fine_integration_time_max_margin" },
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY, "digital_gain_capability" }, /* 10 */
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_MIN, "digital_gain_min" },
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_MAX, "digital_gain_max" },
+	{ SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ, "min_ext_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ, "max_ext_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV, "min_pre_pll_clk_div" }, /* 15 */
+	{ SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV, "max_pre_pll_clk_div" },
+	{ SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ, "min_pll_ip_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ, "max_pll_ip_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_PLL_MULTIPLIER, "min_pll_multiplier" },
+	{ SMIAPP_REG_U16_MAX_PLL_MULTIPLIER, "max_pll_multiplier" }, /* 20 */
+	{ SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ, "min_pll_op_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ, "max_pll_op_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV, "min_vt_sys_clk_div" },
+	{ SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV, "max_vt_sys_clk_div" },
+	{ SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ, "min_vt_sys_clk_freq_hz" }, /* 25 */
+	{ SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ, "max_vt_sys_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ, "min_vt_pix_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ, "max_vt_pix_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV, "min_vt_pix_clk_div" },
+	{ SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV, "max_vt_pix_clk_div" }, /* 30 */
+	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES, "min_frame_length_lines" },
+	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES, "max_frame_length_lines" },
+	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK, "min_line_length_pck" },
+	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK, "max_line_length_pck" },
+	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK, "min_line_blanking_pck" }, /* 35 */
+	{ SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES, "min_frame_blanking_lines" },
+	{ SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE, "min_line_length_pck_step_size" },
+	{ SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV, "min_op_sys_clk_div" },
+	{ SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV, "max_op_sys_clk_div" },
+	{ SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ, "min_op_sys_clk_freq_hz" }, /* 40 */
+	{ SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ, "max_op_sys_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV, "min_op_pix_clk_div" },
+	{ SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV, "max_op_pix_clk_div" },
+	{ SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ, "min_op_pix_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ, "max_op_pix_clk_freq_hz" }, /* 45 */
+	{ SMIAPP_REG_U16_X_ADDR_MIN, "x_addr_min" },
+	{ SMIAPP_REG_U16_Y_ADDR_MIN, "y_addr_min" },
+	{ SMIAPP_REG_U16_X_ADDR_MAX, "x_addr_max" },
+	{ SMIAPP_REG_U16_Y_ADDR_MAX, "y_addr_max" },
+	{ SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE, "min_x_output_size" }, /* 50 */
+	{ SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE, "min_y_output_size" },
+	{ SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE, "max_x_output_size" },
+	{ SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE, "max_y_output_size" },
+	{ SMIAPP_REG_U16_MIN_EVEN_INC, "min_even_inc" },
+	{ SMIAPP_REG_U16_MAX_EVEN_INC, "max_even_inc" }, /* 55 */
+	{ SMIAPP_REG_U16_MIN_ODD_INC, "min_odd_inc" },
+	{ SMIAPP_REG_U16_MAX_ODD_INC, "max_odd_inc" },
+	{ SMIAPP_REG_U16_SCALING_CAPABILITY, "scaling_capability" },
+	{ SMIAPP_REG_U16_SCALER_M_MIN, "scaler_m_min" },
+	{ SMIAPP_REG_U16_SCALER_M_MAX, "scaler_m_max" }, /* 60 */
+	{ SMIAPP_REG_U16_SCALER_N_MIN, "scaler_n_min" },
+	{ SMIAPP_REG_U16_SCALER_N_MAX, "scaler_n_max" },
+	{ SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY, "spatial_sampling_capability" },
+	{ SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY, "digital_crop_capability" },
+	{ SMIAPP_REG_U16_COMPRESSION_CAPABILITY, "compression_capability" }, /* 65 */
+	{ SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY, "fifo_support_capability" },
+	{ SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY, "dphy_ctrl_capability" },
+	{ SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY, "csi_lane_mode_capability" },
+	{ SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY, "csi_signalling_mode_capability" },
+	{ SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY, "fast_standby_capability" }, /* 70 */
+	{ SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY, "cci_address_control_capability" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS, "max_per_lane_bitrate_1_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS, "max_per_lane_bitrate_2_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS, "max_per_lane_bitrate_3_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS, "max_per_lane_bitrate_4_lane_mode_mbps" }, /* 75 */
+	{ SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY, "temp_sensor_capability" },
+	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN, "min_frame_length_lines_bin" },
+	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN, "max_frame_length_lines_bin" },
+	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN, "min_line_length_pck_bin" },
+	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN, "max_line_length_pck_bin" }, /* 80 */
+	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN, "min_line_blanking_pck_bin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN, "fine_integration_time_min_bin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, "fine_integration_time_max_margin_bin" },
+	{ SMIAPP_REG_U8_BINNING_CAPABILITY, "binning_capability" },
+	{ SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY, "binning_weighting_capability" }, /* 85 */
+	{ SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY, "data_transfer_if_capability" },
+	{ SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY, "shading_correction_capability" },
+	{ SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY, "green_imbalance_capability" },
+	{ SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY, "black_level_capability" },
+	{ SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY, "module_specific_correction_capability" }, /* 90 */
+	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY, "defect_correction_capability" },
+	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2, "defect_correction_capability_2" },
+	{ SMIAPP_REG_U8_EDOF_CAPABILITY, "edof_capability" },
+	{ SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY, "colour_feedback_capability" },
+	{ SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY, "estimation_mode_capability" }, /* 95 */
+	{ SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY, "estimation_zone_capability" },
+	{ SMIAPP_REG_U16_CAPABILITY_TRDY_MIN, "capability_trdy_min" },
+	{ SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, "flash_mode_capability" },
+	{ SMIAPP_REG_U8_ACTUATOR_CAPABILITY, "actuator_capability" },
+	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1, "bracketing_lut_capability_1" }, /* 100 */
+	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2, "bracketing_lut_capability_2" },
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP, "analogue_gain_code_step" },
+	{ 0, NULL },
+};
diff --git a/drivers/media/video/smiapp/smiapp-limits.h b/drivers/media/video/smiapp/smiapp-limits.h
new file mode 100644
index 0000000..7f4836bb
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-limits.h
@@ -0,0 +1,128 @@
+/*
+ * drivers/media/video/smiapp/smiapp-limits.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CAPABILITY			0
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN			1
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX			2
+#define SMIAPP_LIMIT_THS_ZERO_MIN				3
+#define SMIAPP_LIMIT_TCLK_TRAIL_MIN				4
+#define SMIAPP_LIMIT_INTEGRATION_TIME_CAPABILITY		5
+#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MIN		6
+#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN		7
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN			8
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN		9
+#define SMIAPP_LIMIT_DIGITAL_GAIN_CAPABILITY			10
+#define SMIAPP_LIMIT_DIGITAL_GAIN_MIN				11
+#define SMIAPP_LIMIT_DIGITAL_GAIN_MAX				12
+#define SMIAPP_LIMIT_MIN_EXT_CLK_FREQ_HZ			13
+#define SMIAPP_LIMIT_MAX_EXT_CLK_FREQ_HZ			14
+#define SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV			15
+#define SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV			16
+#define SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ				17
+#define SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ				18
+#define SMIAPP_LIMIT_MIN_PLL_MULTIPLIER				19
+#define SMIAPP_LIMIT_MAX_PLL_MULTIPLIER				20
+#define SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ				21
+#define SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ				22
+#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV				23
+#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV				24
+#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ			25
+#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ			26
+#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ			27
+#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ			28
+#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV				29
+#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV				30
+#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES			31
+#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES			32
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK			33
+#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK			34
+#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK			35
+#define SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES			36
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_STEP_SIZE		37
+#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV				38
+#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV				39
+#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ			40
+#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ			41
+#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV				42
+#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV				43
+#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ			44
+#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ			45
+#define SMIAPP_LIMIT_X_ADDR_MIN					46
+#define SMIAPP_LIMIT_Y_ADDR_MIN					47
+#define SMIAPP_LIMIT_X_ADDR_MAX					48
+#define SMIAPP_LIMIT_Y_ADDR_MAX					49
+#define SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE				50
+#define SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE				51
+#define SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE				52
+#define SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE				53
+#define SMIAPP_LIMIT_MIN_EVEN_INC				54
+#define SMIAPP_LIMIT_MAX_EVEN_INC				55
+#define SMIAPP_LIMIT_MIN_ODD_INC				56
+#define SMIAPP_LIMIT_MAX_ODD_INC				57
+#define SMIAPP_LIMIT_SCALING_CAPABILITY				58
+#define SMIAPP_LIMIT_SCALER_M_MIN				59
+#define SMIAPP_LIMIT_SCALER_M_MAX				60
+#define SMIAPP_LIMIT_SCALER_N_MIN				61
+#define SMIAPP_LIMIT_SCALER_N_MAX				62
+#define SMIAPP_LIMIT_SPATIAL_SAMPLING_CAPABILITY		63
+#define SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY			64
+#define SMIAPP_LIMIT_COMPRESSION_CAPABILITY			65
+#define SMIAPP_LIMIT_FIFO_SUPPORT_CAPABILITY			66
+#define SMIAPP_LIMIT_DPHY_CTRL_CAPABILITY			67
+#define SMIAPP_LIMIT_CSI_LANE_MODE_CAPABILITY			68
+#define SMIAPP_LIMIT_CSI_SIGNALLING_MODE_CAPABILITY		69
+#define SMIAPP_LIMIT_FAST_STANDBY_CAPABILITY			70
+#define SMIAPP_LIMIT_CCI_ADDRESS_CONTROL_CAPABILITY		71
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	72
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	73
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	74
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	75
+#define SMIAPP_LIMIT_TEMP_SENSOR_CAPABILITY			76
+#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN			77
+#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN			78
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN			79
+#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN			80
+#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN			81
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN		82
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	83
+#define SMIAPP_LIMIT_BINNING_CAPABILITY				84
+#define SMIAPP_LIMIT_BINNING_WEIGHTING_CAPABILITY		85
+#define SMIAPP_LIMIT_DATA_TRANSFER_IF_CAPABILITY		86
+#define SMIAPP_LIMIT_SHADING_CORRECTION_CAPABILITY		87
+#define SMIAPP_LIMIT_GREEN_IMBALANCE_CAPABILITY			88
+#define SMIAPP_LIMIT_BLACK_LEVEL_CAPABILITY			89
+#define SMIAPP_LIMIT_MODULE_SPECIFIC_CORRECTION_CAPABILITY	90
+#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY		91
+#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY_2		92
+#define SMIAPP_LIMIT_EDOF_CAPABILITY				93
+#define SMIAPP_LIMIT_COLOUR_FEEDBACK_CAPABILITY			94
+#define SMIAPP_LIMIT_ESTIMATION_MODE_CAPABILITY			95
+#define SMIAPP_LIMIT_ESTIMATION_ZONE_CAPABILITY			96
+#define SMIAPP_LIMIT_CAPABILITY_TRDY_MIN			97
+#define SMIAPP_LIMIT_FLASH_MODE_CAPABILITY			98
+#define SMIAPP_LIMIT_ACTUATOR_CAPABILITY			99
+#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_1		100
+#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_2		101
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP			102
+#define SMIAPP_LIMIT_LAST					103
diff --git a/drivers/media/video/smiapp/smiapp-quirk.c b/drivers/media/video/smiapp/smiapp-quirk.c
new file mode 100644
index 0000000..dae85a1
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-quirk.c
@@ -0,0 +1,264 @@
+/*
+ * drivers/media/video/smiapp/smiapp-quirk.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+
+#include "smiapp.h"
+
+static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	return smiapp_write(client, (SMIA_REG_8BIT << 16) | reg, val);
+}
+
+static int smiapp_write_8s(struct smiapp_sensor *sensor,
+			   struct smiapp_reg_8 *regs, int len)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	for (; len > 0; len--, regs++) {
+		rval = smiapp_write_8(sensor, regs->reg, regs->val);
+		if (rval < 0) {
+			dev_err(&client->dev,
+				"error %d writing reg 0x%4.4x, val 0x%2.2x",
+				rval, regs->reg, regs->val);
+			return rval;
+		}
+	}
+
+	return 0;
+}
+
+void smiapp_replace_limit(struct smiapp_sensor *sensor,
+			  u32 limit, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
+		smiapp_reg_limits[limit].addr,
+		smiapp_reg_limits[limit].what, val, val);
+	sensor->limits[limit] = val;
+}
+
+int smiapp_replace_limit_at(struct smiapp_sensor *sensor,
+			    u32 reg, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int i;
+
+	for (i = 0; smiapp_reg_limits[i].addr; i++) {
+		if ((smiapp_reg_limits[i].addr & 0xffff) != reg)
+			continue;
+
+		smiapp_replace_limit(sensor, i, val);
+
+		return 0;
+	}
+
+	dev_dbg(&client->dev, "quirk: bad register 0x%4.4x\n", reg);
+
+	return -EINVAL;
+}
+
+static int jt8ew9_limits(struct smiapp_sensor *sensor)
+{
+	if (sensor->minfo.revision_number_major < 0x03)
+		sensor->frame_skip = 1;
+
+	/* Below 24 gain doesn't have effect at all, */
+	/* but ~59 is needed for full dynamic range */
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
+	smiapp_replace_limit(
+		sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
+
+	return 0;
+}
+
+static int jt8ew9_post_poweron(struct smiapp_sensor *sensor)
+{
+	struct smiapp_reg_8 regs[] = {
+		{ 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */
+		{ 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
+		{ 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
+		{ 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */
+		{ 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		{ 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		{ 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		/* Taken from v03. No idea what the rest are. */
+		{ 0x32e0, 0x05 },
+		{ 0x32e1, 0x05 },
+		{ 0x32e2, 0x04 },
+		{ 0x32e5, 0x04 },
+		{ 0x32e6, 0x04 },
+
+	};
+
+	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+}
+
+const struct smiapp_quirk smiapp_jt8ew9_quirk = {
+	.limits = jt8ew9_limits,
+	.post_poweron = jt8ew9_post_poweron,
+};
+
+static int imx125es_post_poweron(struct smiapp_sensor *sensor)
+{
+	/* Taken from v02. No idea what the other two are. */
+	struct smiapp_reg_8 regs[] = {
+		/*
+		 * 0x3302: clk during frame blanking:
+		 * 0x00 - HS mode, 0x01 - LP11
+		 */
+		{ 0x3302, 0x01 },
+		{ 0x302d, 0x00 },
+		{ 0x3b08, 0x8c },
+	};
+
+	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+}
+
+const struct smiapp_quirk smiapp_imx125es_quirk = {
+	.post_poweron = imx125es_post_poweron,
+};
+
+static int jt8ev1_limits(struct smiapp_sensor *sensor)
+{
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
+	smiapp_replace_limit(sensor,
+			     SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
+
+	return 0;
+}
+
+static int jt8ev1_post_poweron(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	struct smiapp_reg_8 regs[] = {
+		{ 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */
+		{ 0x30a3, 0xd0 }, /* FLASH STROBE enable */
+		{ 0x3237, 0x00 }, /* For control of pulse timing for ADC */
+		{ 0x3238, 0x43 },
+		{ 0x3301, 0x06 }, /* For analog bias for sensor */
+		{ 0x3302, 0x06 },
+		{ 0x3304, 0x00 },
+		{ 0x3305, 0x88 },
+		{ 0x332a, 0x14 },
+		{ 0x332c, 0x6b },
+		{ 0x3336, 0x01 },
+		{ 0x333f, 0x1f },
+		{ 0x3355, 0x00 },
+		{ 0x3356, 0x20 },
+		{ 0x33bf, 0x20 }, /* Adjust the FBC speed */
+		{ 0x33c9, 0x20 },
+		{ 0x33ce, 0x30 }, /* Adjust the parameter for logic function */
+		{ 0x33cf, 0xec }, /* For Black sun */
+		{ 0x3328, 0x80 }, /* Ugh. No idea what's this. */
+	};
+
+	struct smiapp_reg_8 regs_96[] = {
+		{ 0x30ae, 0x00 }, /* For control of ADC clock */
+		{ 0x30af, 0xd0 },
+		{ 0x30b0, 0x01 },
+	};
+
+	rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+	if (rval < 0)
+		return rval;
+
+	switch (sensor->platform_data->ext_clk) {
+	case 9600000:
+		return smiapp_write_8s(sensor, regs_96,
+				       ARRAY_SIZE(regs_96));
+	default:
+		dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
+			 sensor->platform_data->ext_clk);
+		return 0;
+	}
+}
+
+static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor)
+{
+	return smiapp_write_8(sensor, 0x3328, 0x00);
+}
+
+static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
+{
+	int rval;
+
+	/* Workaround: allows fast standby to work properly */
+	rval = smiapp_write_8(sensor, 0x3205, 0x04);
+	if (rval < 0)
+		return rval;
+
+	/* Wait for 1 ms + one line => 2 ms is likely enough */
+	usleep_range(2000, 2000);
+
+	/* Restore it */
+	rval = smiapp_write_8(sensor, 0x3205, 0x00);
+	if (rval < 0)
+		return rval;
+
+	return smiapp_write_8(sensor, 0x3328, 0x80);
+}
+
+const struct smiapp_quirk smiapp_jt8ev1_quirk = {
+	.limits = jt8ev1_limits,
+	.post_poweron = jt8ev1_post_poweron,
+	.pre_streamon = jt8ev1_pre_streamon,
+	.post_streamoff = jt8ev1_post_streamoff,
+	.flags = SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE,
+};
+
+static int tcm8500md_limits(struct smiapp_sensor *sensor)
+{
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
+
+	return 0;
+}
+
+const struct smiapp_quirk smiapp_tcm8500md_quirk = {
+	.limits = tcm8500md_limits,
+};
diff --git a/drivers/media/video/smiapp/smiapp-quirk.h b/drivers/media/video/smiapp/smiapp-quirk.h
new file mode 100644
index 0000000..7a1b3a0
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-quirk.h
@@ -0,0 +1,72 @@
+/*
+ * drivers/media/video/smiapp/smiapp-quirk.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_QUIRK__
+#define __SMIAPP_QUIRK__
+
+struct smiapp_sensor;
+
+/**
+ * struct smiapp_quirk - quirks for sensors that deviate from SMIA++ standard
+ *
+ * @limits: Replace sensor->limits with values which can't be read from
+ *	    sensor registers. Called the first time the sensor is powered up.
+ * @post_poweron: Called always after the sensor has been fully powered on.
+ * @pre_streamon: Called just before streaming is enabled.
+ * @post_streamon: Called right after stopping streaming.
+ */
+struct smiapp_quirk {
+	int (*limits)(struct smiapp_sensor *sensor);
+	int (*post_poweron)(struct smiapp_sensor *sensor);
+	int (*pre_streamon)(struct smiapp_sensor *sensor);
+	int (*post_streamoff)(struct smiapp_sensor *sensor);
+	unsigned long flags;
+};
+
+/* op pix clock is for all lanes in total normally */
+#define SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
+
+struct smiapp_reg_8 {
+	u16 reg;
+	u8 val;
+};
+
+void smiapp_replace_limit(struct smiapp_sensor *sensor,
+			  u32 limit, u32 val);
+
+#define smiapp_call_quirk(_sensor, _quirk, ...)				\
+	(_sensor->minfo.quirk &&					\
+	 _sensor->minfo.quirk->_quirk ?					\
+	 _sensor->minfo.quirk->_quirk(_sensor, ##__VA_ARGS__) : 0)
+
+#define smiapp_needs_quirk(_sensor, _quirk)		\
+	(_sensor->minfo.quirk ?				\
+	 _sensor->minfo.quirk->flags & _quirk : 0)
+
+extern const struct smiapp_quirk smiapp_jt8ev1_quirk;
+extern const struct smiapp_quirk smiapp_imx125es_quirk;
+extern const struct smiapp_quirk smiapp_jt8ew9_quirk;
+extern const struct smiapp_quirk smiapp_tcm8500md_quirk;
+
+#endif /* __SMIAPP_QUIRK__ */
diff --git a/drivers/media/video/smiapp/smiapp-reg-defs.h b/drivers/media/video/smiapp/smiapp-reg-defs.h
new file mode 100644
index 0000000..a089eb8
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-reg-defs.h
@@ -0,0 +1,503 @@
+/*
+ * drivers/media/video/smiapp/smiapp-reg-defs.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#define SMIAPP_REG_MK_U8(r) ((SMIA_REG_8BIT << 16) | (r))
+#define SMIAPP_REG_MK_U16(r) ((SMIA_REG_16BIT << 16) | (r))
+#define SMIAPP_REG_MK_U32(r) ((SMIA_REG_32BIT << 16) | (r))
+
+#define SMIAPP_REG_MK_F32(r) (SMIA_REG_FLAG_FLOAT | (SMIA_REG_32BIT << 16) | (r))
+
+#define SMIAPP_REG_U16_MODEL_ID					SMIAPP_REG_MK_U16(0x0000)
+#define SMIAPP_REG_U8_REVISION_NUMBER_MAJOR			SMIAPP_REG_MK_U8(0x0002)
+#define SMIAPP_REG_U8_MANUFACTURER_ID				SMIAPP_REG_MK_U8(0x0003)
+#define SMIAPP_REG_U8_SMIA_VERSION				SMIAPP_REG_MK_U8(0x0004)
+#define SMIAPP_REG_U8_FRAME_COUNT				SMIAPP_REG_MK_U8(0x0005)
+#define SMIAPP_REG_U8_PIXEL_ORDER				SMIAPP_REG_MK_U8(0x0006)
+#define SMIAPP_REG_U16_DATA_PEDESTAL				SMIAPP_REG_MK_U16(0x0008)
+#define SMIAPP_REG_U8_PIXEL_DEPTH				SMIAPP_REG_MK_U8(0x000c)
+#define SMIAPP_REG_U8_REVISION_NUMBER_MINOR			SMIAPP_REG_MK_U8(0x0010)
+#define SMIAPP_REG_U8_SMIAPP_VERSION				SMIAPP_REG_MK_U8(0x0011)
+#define SMIAPP_REG_U8_MODULE_DATE_YEAR				SMIAPP_REG_MK_U8(0x0012)
+#define SMIAPP_REG_U8_MODULE_DATE_MONTH				SMIAPP_REG_MK_U8(0x0013)
+#define SMIAPP_REG_U8_MODULE_DATE_DAY				SMIAPP_REG_MK_U8(0x0014)
+#define SMIAPP_REG_U8_MODULE_DATE_PHASE				SMIAPP_REG_MK_U8(0x0015)
+#define SMIAPP_REG_U16_SENSOR_MODEL_ID				SMIAPP_REG_MK_U16(0x0016)
+#define SMIAPP_REG_U8_SENSOR_REVISION_NUMBER			SMIAPP_REG_MK_U8(0x0018)
+#define SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID			SMIAPP_REG_MK_U8(0x0019)
+#define SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION			SMIAPP_REG_MK_U8(0x001a)
+#define SMIAPP_REG_U32_SERIAL_NUMBER				SMIAPP_REG_MK_U32(0x001c)
+#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x0040)
+#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE		SMIAPP_REG_MK_U8(0x0041)
+#define SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(n)		SMIAPP_REG_MK_U16(0x0042 + ((n) << 1)) /* 0 <= n <= 14 */
+#define SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(n)		SMIAPP_REG_MK_U32(0x0060 + ((n) << 2)) /* 0 <= n <= 7 */
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x0080)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN			SMIAPP_REG_MK_U16(0x0084)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX			SMIAPP_REG_MK_U16(0x0086)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP			SMIAPP_REG_MK_U16(0x0088)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_TYPE			SMIAPP_REG_MK_U16(0x008a)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_M0				SMIAPP_REG_MK_U16(0x008c)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_C0				SMIAPP_REG_MK_U16(0x008e)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_M1				SMIAPP_REG_MK_U16(0x0090)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_C1				SMIAPP_REG_MK_U16(0x0092)
+#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x00c0)
+#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_SUBTYPE			SMIAPP_REG_MK_U8(0x00c1)
+#define SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(n)		SMIAPP_REG_MK_U16(0x00c2 + ((n) << 1))
+#define SMIAPP_REG_U8_MODE_SELECT				SMIAPP_REG_MK_U8(0x0100)
+#define SMIAPP_REG_U8_IMAGE_ORIENTATION				SMIAPP_REG_MK_U8(0x0101)
+#define SMIAPP_REG_U8_SOFTWARE_RESET				SMIAPP_REG_MK_U8(0x0103)
+#define SMIAPP_REG_U8_GROUPED_PARAMETER_HOLD			SMIAPP_REG_MK_U8(0x0104)
+#define SMIAPP_REG_U8_MASK_CORRUPTED_FRAMES			SMIAPP_REG_MK_U8(0x0105)
+#define SMIAPP_REG_U8_FAST_STANDBY_CTRL				SMIAPP_REG_MK_U8(0x0106)
+#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0107)
+#define SMIAPP_REG_U8_2ND_CCI_IF_CONTROL			SMIAPP_REG_MK_U8(0x0108)
+#define SMIAPP_REG_U8_2ND_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0109)
+#define SMIAPP_REG_U8_CSI_CHANNEL_IDENTIFIER			SMIAPP_REG_MK_U8(0x0110)
+#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE			SMIAPP_REG_MK_U8(0x0111)
+#define SMIAPP_REG_U16_CSI_DATA_FORMAT				SMIAPP_REG_MK_U16(0x0112)
+#define SMIAPP_REG_U8_CSI_LANE_MODE				SMIAPP_REG_MK_U8(0x0114)
+#define SMIAPP_REG_U8_CSI2_10_TO_8_DT				SMIAPP_REG_MK_U8(0x0115)
+#define SMIAPP_REG_U8_CSI2_10_TO_7_DT				SMIAPP_REG_MK_U8(0x0116)
+#define SMIAPP_REG_U8_CSI2_10_TO_6_DT				SMIAPP_REG_MK_U8(0x0117)
+#define SMIAPP_REG_U8_CSI2_12_TO_8_DT				SMIAPP_REG_MK_U8(0x0118)
+#define SMIAPP_REG_U8_CSI2_12_TO_7_DT				SMIAPP_REG_MK_U8(0x0119)
+#define SMIAPP_REG_U8_CSI2_12_TO_6_DT				SMIAPP_REG_MK_U8(0x011a)
+#define SMIAPP_REG_U8_CSI2_14_TO_10_DT				SMIAPP_REG_MK_U8(0x011b)
+#define SMIAPP_REG_U8_CSI2_14_TO_8_DT				SMIAPP_REG_MK_U8(0x011c)
+#define SMIAPP_REG_U8_CSI2_16_TO_10_DT				SMIAPP_REG_MK_U8(0x011d)
+#define SMIAPP_REG_U8_CSI2_16_TO_8_DT				SMIAPP_REG_MK_U8(0x011e)
+#define SMIAPP_REG_U8_GAIN_MODE					SMIAPP_REG_MK_U8(0x0120)
+#define SMIAPP_REG_U16_VANA_VOLTAGE				SMIAPP_REG_MK_U16(0x0130)
+#define SMIAPP_REG_U16_VDIG_VOLTAGE				SMIAPP_REG_MK_U16(0x0132)
+#define SMIAPP_REG_U16_VIO_VOLTAGE				SMIAPP_REG_MK_U16(0x0134)
+#define SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ			SMIAPP_REG_MK_U16(0x0136)
+#define SMIAPP_REG_U8_TEMP_SENSOR_CONTROL			SMIAPP_REG_MK_U8(0x0138)
+#define SMIAPP_REG_U8_TEMP_SENSOR_MODE				SMIAPP_REG_MK_U8(0x0139)
+#define SMIAPP_REG_U8_TEMP_SENSOR_OUTPUT			SMIAPP_REG_MK_U8(0x013a)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0200)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0202)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL		SMIAPP_REG_MK_U16(0x0204)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENR		SMIAPP_REG_MK_U16(0x0206)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_RED			SMIAPP_REG_MK_U16(0x0208)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_BLUE			SMIAPP_REG_MK_U16(0x020a)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENB		SMIAPP_REG_MK_U16(0x020c)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENR			SMIAPP_REG_MK_U16(0x020e)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_RED				SMIAPP_REG_MK_U16(0x0210)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0212)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0214)
+#define SMIAPP_REG_U16_VT_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0300)
+#define SMIAPP_REG_U16_VT_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x0302)
+#define SMIAPP_REG_U16_PRE_PLL_CLK_DIV				SMIAPP_REG_MK_U16(0x0304)
+#define SMIAPP_REG_U16_PLL_MULTIPLIER				SMIAPP_REG_MK_U16(0x0306)
+#define SMIAPP_REG_U16_OP_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0308)
+#define SMIAPP_REG_U16_OP_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x030a)
+#define SMIAPP_REG_U16_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x0340)
+#define SMIAPP_REG_U16_LINE_LENGTH_PCK				SMIAPP_REG_MK_U16(0x0342)
+#define SMIAPP_REG_U16_X_ADDR_START				SMIAPP_REG_MK_U16(0x0344)
+#define SMIAPP_REG_U16_Y_ADDR_START				SMIAPP_REG_MK_U16(0x0346)
+#define SMIAPP_REG_U16_X_ADDR_END				SMIAPP_REG_MK_U16(0x0348)
+#define SMIAPP_REG_U16_Y_ADDR_END				SMIAPP_REG_MK_U16(0x034a)
+#define SMIAPP_REG_U16_X_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034c)
+#define SMIAPP_REG_U16_Y_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034e)
+#define SMIAPP_REG_U16_X_EVEN_INC				SMIAPP_REG_MK_U16(0x0380)
+#define SMIAPP_REG_U16_X_ODD_INC				SMIAPP_REG_MK_U16(0x0382)
+#define SMIAPP_REG_U16_Y_EVEN_INC				SMIAPP_REG_MK_U16(0x0384)
+#define SMIAPP_REG_U16_Y_ODD_INC				SMIAPP_REG_MK_U16(0x0386)
+#define SMIAPP_REG_U16_SCALING_MODE				SMIAPP_REG_MK_U16(0x0400)
+#define SMIAPP_REG_U16_SPATIAL_SAMPLING				SMIAPP_REG_MK_U16(0x0402)
+#define SMIAPP_REG_U16_SCALE_M					SMIAPP_REG_MK_U16(0x0404)
+#define SMIAPP_REG_U16_SCALE_N					SMIAPP_REG_MK_U16(0x0406)
+#define SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET			SMIAPP_REG_MK_U16(0x0408)
+#define SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET			SMIAPP_REG_MK_U16(0x040a)
+#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH			SMIAPP_REG_MK_U16(0x040c)
+#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT		SMIAPP_REG_MK_U16(0x040e)
+#define SMIAPP_REG_U16_COMPRESSION_MODE				SMIAPP_REG_MK_U16(0x0500)
+#define SMIAPP_REG_U16_TEST_PATTERN_MODE			SMIAPP_REG_MK_U16(0x0600)
+#define SMIAPP_REG_U16_TEST_DATA_RED				SMIAPP_REG_MK_U16(0x0602)
+#define SMIAPP_REG_U16_TEST_DATA_GREENR				SMIAPP_REG_MK_U16(0x0604)
+#define SMIAPP_REG_U16_TEST_DATA_BLUE				SMIAPP_REG_MK_U16(0x0606)
+#define SMIAPP_REG_U16_TEST_DATA_GREENB				SMIAPP_REG_MK_U16(0x0608)
+#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060a)
+#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_POSITION		SMIAPP_REG_MK_U16(0x060c)
+#define SMIAPP_REG_U16_VERTICAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060e)
+#define SMIAPP_REG_U16_VERTICAL_CURSOR_POSITION			SMIAPP_REG_MK_U16(0x0610)
+#define SMIAPP_REG_U16_FIFO_WATER_MARK_PIXELS			SMIAPP_REG_MK_U16(0x0700)
+#define SMIAPP_REG_U8_TCLK_POST					SMIAPP_REG_MK_U8(0x0800)
+#define SMIAPP_REG_U8_THS_PREPARE				SMIAPP_REG_MK_U8(0x0801)
+#define SMIAPP_REG_U8_THS_ZERO_MIN				SMIAPP_REG_MK_U8(0x0802)
+#define SMIAPP_REG_U8_THS_TRAIL					SMIAPP_REG_MK_U8(0x0803)
+#define SMIAPP_REG_U8_TCLK_TRAIL_MIN				SMIAPP_REG_MK_U8(0x0804)
+#define SMIAPP_REG_U8_TCLK_PREPARE				SMIAPP_REG_MK_U8(0x0805)
+#define SMIAPP_REG_U8_TCLK_ZERO					SMIAPP_REG_MK_U8(0x0806)
+#define SMIAPP_REG_U8_TLPX					SMIAPP_REG_MK_U8(0x0807)
+#define SMIAPP_REG_U8_DPHY_CTRL					SMIAPP_REG_MK_U8(0x0808)
+#define SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS		SMIAPP_REG_MK_U32(0x0820)
+#define SMIAPP_REG_U8_BINNING_MODE				SMIAPP_REG_MK_U8(0x0900)
+#define SMIAPP_REG_U8_BINNING_TYPE				SMIAPP_REG_MK_U8(0x0901)
+#define SMIAPP_REG_U8_BINNING_WEIGHTING				SMIAPP_REG_MK_U8(0x0902)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL			SMIAPP_REG_MK_U8(0x0a00)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS			SMIAPP_REG_MK_U8(0x0a01)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a02)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0			SMIAPP_REG_MK_U8(0x0a04)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_1			SMIAPP_REG_MK_U8(0x0a05)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_2			SMIAPP_REG_MK_U8(0x0a06)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_3			SMIAPP_REG_MK_U8(0x0a07)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_4			SMIAPP_REG_MK_U8(0x0a08)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_5			SMIAPP_REG_MK_U8(0x0a09)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_12		SMIAPP_REG_MK_U8(0x0a10)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_13		SMIAPP_REG_MK_U8(0x0a11)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_14		SMIAPP_REG_MK_U8(0x0a12)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_15		SMIAPP_REG_MK_U8(0x0a13)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_16		SMIAPP_REG_MK_U8(0x0a14)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_17		SMIAPP_REG_MK_U8(0x0a15)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_18		SMIAPP_REG_MK_U8(0x0a16)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_19		SMIAPP_REG_MK_U8(0x0a17)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_20		SMIAPP_REG_MK_U8(0x0a18)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_21		SMIAPP_REG_MK_U8(0x0a19)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_22		SMIAPP_REG_MK_U8(0x0a1a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_23		SMIAPP_REG_MK_U8(0x0a1b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_24		SMIAPP_REG_MK_U8(0x0a1c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_25		SMIAPP_REG_MK_U8(0x0a1d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_26		SMIAPP_REG_MK_U8(0x0a1e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_27		SMIAPP_REG_MK_U8(0x0a1f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_28		SMIAPP_REG_MK_U8(0x0a20)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_29		SMIAPP_REG_MK_U8(0x0a21)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_30		SMIAPP_REG_MK_U8(0x0a22)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_31		SMIAPP_REG_MK_U8(0x0a23)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_32		SMIAPP_REG_MK_U8(0x0a24)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_33		SMIAPP_REG_MK_U8(0x0a25)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_34		SMIAPP_REG_MK_U8(0x0a26)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_35		SMIAPP_REG_MK_U8(0x0a27)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_36		SMIAPP_REG_MK_U8(0x0a28)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_37		SMIAPP_REG_MK_U8(0x0a29)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_38		SMIAPP_REG_MK_U8(0x0a2a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_39		SMIAPP_REG_MK_U8(0x0a2b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_40		SMIAPP_REG_MK_U8(0x0a2c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_41		SMIAPP_REG_MK_U8(0x0a2d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_42		SMIAPP_REG_MK_U8(0x0a2e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_43		SMIAPP_REG_MK_U8(0x0a2f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_44		SMIAPP_REG_MK_U8(0x0a30)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_45		SMIAPP_REG_MK_U8(0x0a31)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_46		SMIAPP_REG_MK_U8(0x0a32)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_47		SMIAPP_REG_MK_U8(0x0a33)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_48		SMIAPP_REG_MK_U8(0x0a34)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_49		SMIAPP_REG_MK_U8(0x0a35)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_50		SMIAPP_REG_MK_U8(0x0a36)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_51		SMIAPP_REG_MK_U8(0x0a37)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_52		SMIAPP_REG_MK_U8(0x0a38)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_53		SMIAPP_REG_MK_U8(0x0a39)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_54		SMIAPP_REG_MK_U8(0x0a3a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_55		SMIAPP_REG_MK_U8(0x0a3b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_56		SMIAPP_REG_MK_U8(0x0a3c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_57		SMIAPP_REG_MK_U8(0x0a3d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_58		SMIAPP_REG_MK_U8(0x0a3e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_59		SMIAPP_REG_MK_U8(0x0a3f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_60		SMIAPP_REG_MK_U8(0x0a40)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_61		SMIAPP_REG_MK_U8(0x0a41)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_62		SMIAPP_REG_MK_U8(0x0a42)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_63		SMIAPP_REG_MK_U8(0x0a43)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_CTRL			SMIAPP_REG_MK_U8(0x0a44)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_STATUS			SMIAPP_REG_MK_U8(0x0a45)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a46)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_0			SMIAPP_REG_MK_U8(0x0a48)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_1			SMIAPP_REG_MK_U8(0x0a49)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_2			SMIAPP_REG_MK_U8(0x0a4a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_3			SMIAPP_REG_MK_U8(0x0a4b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_4			SMIAPP_REG_MK_U8(0x0a4c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_5			SMIAPP_REG_MK_U8(0x0a4d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_6			SMIAPP_REG_MK_U8(0x0a4e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_7			SMIAPP_REG_MK_U8(0x0a4f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_8			SMIAPP_REG_MK_U8(0x0a50)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_9			SMIAPP_REG_MK_U8(0x0a51)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_10		SMIAPP_REG_MK_U8(0x0a52)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_11		SMIAPP_REG_MK_U8(0x0a53)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_12		SMIAPP_REG_MK_U8(0x0a54)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_13		SMIAPP_REG_MK_U8(0x0a55)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_14		SMIAPP_REG_MK_U8(0x0a56)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_15		SMIAPP_REG_MK_U8(0x0a57)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_16		SMIAPP_REG_MK_U8(0x0a58)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_17		SMIAPP_REG_MK_U8(0x0a59)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_18		SMIAPP_REG_MK_U8(0x0a5a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_19		SMIAPP_REG_MK_U8(0x0a5b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_20		SMIAPP_REG_MK_U8(0x0a5c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_21		SMIAPP_REG_MK_U8(0x0a5d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_22		SMIAPP_REG_MK_U8(0x0a5e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_23		SMIAPP_REG_MK_U8(0x0a5f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_24		SMIAPP_REG_MK_U8(0x0a60)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_25		SMIAPP_REG_MK_U8(0x0a61)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_26		SMIAPP_REG_MK_U8(0x0a62)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_27		SMIAPP_REG_MK_U8(0x0a63)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_28		SMIAPP_REG_MK_U8(0x0a64)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_29		SMIAPP_REG_MK_U8(0x0a65)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_30		SMIAPP_REG_MK_U8(0x0a66)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_31		SMIAPP_REG_MK_U8(0x0a67)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_32		SMIAPP_REG_MK_U8(0x0a68)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_33		SMIAPP_REG_MK_U8(0x0a69)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_34		SMIAPP_REG_MK_U8(0x0a6a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_35		SMIAPP_REG_MK_U8(0x0a6b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_36		SMIAPP_REG_MK_U8(0x0a6c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_37		SMIAPP_REG_MK_U8(0x0a6d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_38		SMIAPP_REG_MK_U8(0x0a6e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_39		SMIAPP_REG_MK_U8(0x0a6f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_40		SMIAPP_REG_MK_U8(0x0a70)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_41		SMIAPP_REG_MK_U8(0x0a71)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_42		SMIAPP_REG_MK_U8(0x0a72)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_43		SMIAPP_REG_MK_U8(0x0a73)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_44		SMIAPP_REG_MK_U8(0x0a74)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_45		SMIAPP_REG_MK_U8(0x0a75)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_46		SMIAPP_REG_MK_U8(0x0a76)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_47		SMIAPP_REG_MK_U8(0x0a77)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_48		SMIAPP_REG_MK_U8(0x0a78)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_49		SMIAPP_REG_MK_U8(0x0a79)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_50		SMIAPP_REG_MK_U8(0x0a7a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_51		SMIAPP_REG_MK_U8(0x0a7b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_52		SMIAPP_REG_MK_U8(0x0a7c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_53		SMIAPP_REG_MK_U8(0x0a7d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_54		SMIAPP_REG_MK_U8(0x0a7e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_55		SMIAPP_REG_MK_U8(0x0a7f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_56		SMIAPP_REG_MK_U8(0x0a80)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_57		SMIAPP_REG_MK_U8(0x0a81)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_58		SMIAPP_REG_MK_U8(0x0a82)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_59		SMIAPP_REG_MK_U8(0x0a83)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_60		SMIAPP_REG_MK_U8(0x0a84)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_61		SMIAPP_REG_MK_U8(0x0a85)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_62		SMIAPP_REG_MK_U8(0x0a86)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_63		SMIAPP_REG_MK_U8(0x0a87)
+#define SMIAPP_REG_U8_SHADING_CORRECTION_ENABLE			SMIAPP_REG_MK_U8(0x0b00)
+#define SMIAPP_REG_U8_LUMINANCE_CORRECTION_LEVEL		SMIAPP_REG_MK_U8(0x0b01)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_ENABLE		SMIAPP_REG_MK_U8(0x0b02)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_WEIGHT		SMIAPP_REG_MK_U8(0x0b03)
+#define SMIAPP_REG_U8_BLACK_LEVEL_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b04)
+#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b05)
+#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b06)
+#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b07)
+#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b08)
+#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b09)
+#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0a)
+#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b0b)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b0c)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_WEIGHT		SMIAPP_REG_MK_U8(0x0b0d)
+#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0e)
+#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b0f)
+#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b10)
+#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b11)
+#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b12)
+#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b13)
+#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b14)
+#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b15)
+#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b16)
+#define SMIAPP_REG_U8_EDOF_MODE					SMIAPP_REG_MK_U8(0x0b80)
+#define SMIAPP_REG_U8_SHARPNESS					SMIAPP_REG_MK_U8(0x0b83)
+#define SMIAPP_REG_U8_DENOISING					SMIAPP_REG_MK_U8(0x0b84)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC				SMIAPP_REG_MK_U8(0x0b85)
+#define SMIAPP_REG_U16_DEPTH_OF_FIELD				SMIAPP_REG_MK_U16(0x0b86)
+#define SMIAPP_REG_U16_FOCUS_DISTANCE				SMIAPP_REG_MK_U16(0x0b88)
+#define SMIAPP_REG_U8_ESTIMATION_MODE_CTRL			SMIAPP_REG_MK_U8(0x0b8a)
+#define SMIAPP_REG_U16_COLOUR_TEMPERATURE			SMIAPP_REG_MK_U16(0x0b8c)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENR			SMIAPP_REG_MK_U16(0x0b8e)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_RED			SMIAPP_REG_MK_U16(0x0b90)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0b92)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0b94)
+#define SMIAPP_REG_U8_ESTIMATION_ZONE_MODE			SMIAPP_REG_MK_U8(0x0bc0)
+#define SMIAPP_REG_U16_FIXED_ZONE_WEIGHTING			SMIAPP_REG_MK_U16(0x0bc2)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_X_START			SMIAPP_REG_MK_U16(0x0bc4)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_Y_START			SMIAPP_REG_MK_U16(0x0bc6)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_WIDTH			SMIAPP_REG_MK_U16(0x0bc8)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_HEIGHT			SMIAPP_REG_MK_U16(0x0bca)
+#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL1			SMIAPP_REG_MK_U8(0x0c00)
+#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL2			SMIAPP_REG_MK_U8(0x0c01)
+#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_1		SMIAPP_REG_MK_U8(0x0c02)
+#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_2		SMIAPP_REG_MK_U8(0x0c03)
+#define SMIAPP_REG_U16_TRDY_CTRL				SMIAPP_REG_MK_U16(0x0c04)
+#define SMIAPP_REG_U16_TRDOUT_CTRL				SMIAPP_REG_MK_U16(0x0c06)
+#define SMIAPP_REG_U16_TSHUTTER_STROBE_DELAY_CTRL		SMIAPP_REG_MK_U16(0x0c08)
+#define SMIAPP_REG_U16_TSHUTTER_STROBE_WIDTH_CTRL		SMIAPP_REG_MK_U16(0x0c0a)
+#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c0c)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c0e)
+#define SMIAPP_REG_U16_TGRST_INTERVAL_CTRL			SMIAPP_REG_MK_U16(0x0c10)
+#define SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT			SMIAPP_REG_MK_U8(0x0c12)
+#define SMIAPP_REG_U16_FLASH_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c14)
+#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL		SMIAPP_REG_MK_U16(0x0c16)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL		SMIAPP_REG_MK_U16(0x0c18)
+#define SMIAPP_REG_U8_FLASH_MODE_RS				SMIAPP_REG_MK_U8(0x0c1a)
+#define SMIAPP_REG_U8_FLASH_TRIGGER_RS				SMIAPP_REG_MK_U8(0x0c1b)
+#define SMIAPP_REG_U8_FLASH_STATUS				SMIAPP_REG_MK_U8(0x0c1c)
+#define SMIAPP_REG_U8_SA_STROBE_MODE				SMIAPP_REG_MK_U8(0x0c1d)
+#define SMIAPP_REG_U16_SA_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c1e)
+#define SMIAPP_REG_U16_TSA_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c20)
+#define SMIAPP_REG_U16_TSA_STROBE_WIDTH_CTRL			SMIAPP_REG_MK_U16(0x0c22)
+#define SMIAPP_REG_U8_SA_STROBE_TRIGGER				SMIAPP_REG_MK_U8(0x0c24)
+#define SMIAPP_REG_U8_SPECIAL_ACTUATOR_STATUS			SMIAPP_REG_MK_U8(0x0c25)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_RS_CTRL	SMIAPP_REG_MK_U16(0x0c26)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_RS_CTRL		SMIAPP_REG_MK_U16(0x0c28)
+#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_RS_CTRL		SMIAPP_REG_MK_U8(0x0c2a)
+#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_CTRL			SMIAPP_REG_MK_U8(0x0c2b)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c2c)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_CTRL		SMIAPP_REG_MK_U16(0x0c2e)
+#define SMIAPP_REG_U8_LOW_LEVEL_CTRL				SMIAPP_REG_MK_U8(0x0c80)
+#define SMIAPP_REG_U16_MAIN_TRIGGER_REF_POINT			SMIAPP_REG_MK_U16(0x0c82)
+#define SMIAPP_REG_U16_MAIN_TRIGGER_T3				SMIAPP_REG_MK_U16(0x0c84)
+#define SMIAPP_REG_U8_MAIN_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c86)
+#define SMIAPP_REG_U16_PHASE1_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c88)
+#define SMIAPP_REG_U8_PHASE1_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8a)
+#define SMIAPP_REG_U16_PHASE2_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c8c)
+#define SMIAPP_REG_U8_PHASE2_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8e)
+#define SMIAPP_REG_U8_MECH_SHUTTER_CTRL				SMIAPP_REG_MK_U8(0x0d00)
+#define SMIAPP_REG_U8_OPERATION_MODE				SMIAPP_REG_MK_U8(0x0d01)
+#define SMIAPP_REG_U8_ACT_STATE1				SMIAPP_REG_MK_U8(0x0d02)
+#define SMIAPP_REG_U8_ACT_STATE2				SMIAPP_REG_MK_U8(0x0d03)
+#define SMIAPP_REG_U16_FOCUS_CHANGE				SMIAPP_REG_MK_U16(0x0d80)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_CONTROL			SMIAPP_REG_MK_U16(0x0d82)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE1		SMIAPP_REG_MK_U16(0x0d84)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE2		SMIAPP_REG_MK_U16(0x0d86)
+#define SMIAPP_REG_U8_STROBE_COUNT_PHASE1			SMIAPP_REG_MK_U8(0x0d88)
+#define SMIAPP_REG_U8_STROBE_COUNT_PHASE2			SMIAPP_REG_MK_U8(0x0d89)
+#define SMIAPP_REG_U8_POSITION					SMIAPP_REG_MK_U8(0x0d8a)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CONTROL			SMIAPP_REG_MK_U8(0x0e00)
+#define SMIAPP_REG_U8_BRACKETING_LUT_MODE			SMIAPP_REG_MK_U8(0x0e01)
+#define SMIAPP_REG_U8_BRACKETING_LUT_ENTRY_CONTROL		SMIAPP_REG_MK_U8(0x0e02)
+#define SMIAPP_REG_U8_LUT_PARAMETERS_START			SMIAPP_REG_MK_U8(0x0e10)
+#define SMIAPP_REG_U8_LUT_PARAMETERS_END			SMIAPP_REG_MK_U8(0x0eff)
+#define SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY		SMIAPP_REG_MK_U16(0x1000)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1004)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN	SMIAPP_REG_MK_U16(0x1006)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1008)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN		SMIAPP_REG_MK_U16(0x100a)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x1080)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_MIN				SMIAPP_REG_MK_U16(0x1084)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_MAX				SMIAPP_REG_MK_U16(0x1086)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_STEP_SIZE			SMIAPP_REG_MK_U16(0x1088)
+#define SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1100)
+#define SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1104)
+#define SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x1108)
+#define SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x110a)
+#define SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x110c)
+#define SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1110)
+#define SMIAPP_REG_U16_MIN_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1114)
+#define SMIAPP_REG_U16_MAX_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1116)
+#define SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1118)
+#define SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x111c)
+#define SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1120)
+#define SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1122)
+#define SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1124)
+#define SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1128)
+#define SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x112c)
+#define SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1130)
+#define SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1134)
+#define SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1136)
+#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1140)
+#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1142)
+#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1144)
+#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1146)
+#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK			SMIAPP_REG_MK_U16(0x1148)
+#define SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES			SMIAPP_REG_MK_U16(0x114a)
+#define SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE		SMIAPP_REG_MK_U8(0x114c)
+#define SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1160)
+#define SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1162)
+#define SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1164)
+#define SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1168)
+#define SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116c)
+#define SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116e)
+#define SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1170)
+#define SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1174)
+#define SMIAPP_REG_U16_X_ADDR_MIN				SMIAPP_REG_MK_U16(0x1180)
+#define SMIAPP_REG_U16_Y_ADDR_MIN				SMIAPP_REG_MK_U16(0x1182)
+#define SMIAPP_REG_U16_X_ADDR_MAX				SMIAPP_REG_MK_U16(0x1184)
+#define SMIAPP_REG_U16_Y_ADDR_MAX				SMIAPP_REG_MK_U16(0x1186)
+#define SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x1188)
+#define SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118a)
+#define SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118c)
+#define SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118e)
+#define SMIAPP_REG_U16_MIN_EVEN_INC				SMIAPP_REG_MK_U16(0x11c0)
+#define SMIAPP_REG_U16_MAX_EVEN_INC				SMIAPP_REG_MK_U16(0x11c2)
+#define SMIAPP_REG_U16_MIN_ODD_INC				SMIAPP_REG_MK_U16(0x11c4)
+#define SMIAPP_REG_U16_MAX_ODD_INC				SMIAPP_REG_MK_U16(0x11c6)
+#define SMIAPP_REG_U16_SCALING_CAPABILITY			SMIAPP_REG_MK_U16(0x1200)
+#define SMIAPP_REG_U16_SCALER_M_MIN				SMIAPP_REG_MK_U16(0x1204)
+#define SMIAPP_REG_U16_SCALER_M_MAX				SMIAPP_REG_MK_U16(0x1206)
+#define SMIAPP_REG_U16_SCALER_N_MIN				SMIAPP_REG_MK_U16(0x1208)
+#define SMIAPP_REG_U16_SCALER_N_MAX				SMIAPP_REG_MK_U16(0x120a)
+#define SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY		SMIAPP_REG_MK_U16(0x120c)
+#define SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY			SMIAPP_REG_MK_U8(0x120e)
+#define SMIAPP_REG_U16_COMPRESSION_CAPABILITY			SMIAPP_REG_MK_U16(0x1300)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINRED			SMIAPP_REG_MK_U16(0x1400)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINRED		SMIAPP_REG_MK_U16(0x1402)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINRED			SMIAPP_REG_MK_U16(0x1404)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINGREEN		SMIAPP_REG_MK_U16(0x1406)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINGREEN		SMIAPP_REG_MK_U16(0x1408)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINGREEN		SMIAPP_REG_MK_U16(0x140a)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINBLUE			SMIAPP_REG_MK_U16(0x140c)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINBLUE		SMIAPP_REG_MK_U16(0x140e)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINBLUE		SMIAPP_REG_MK_U16(0x1410)
+#define SMIAPP_REG_U16_FIFO_SIZE_PIXELS				SMIAPP_REG_MK_U16(0x1500)
+#define SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY			SMIAPP_REG_MK_U8(0x1502)
+#define SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY			SMIAPP_REG_MK_U8(0x1600)
+#define SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1601)
+#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x1602)
+#define SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY			SMIAPP_REG_MK_U8(0x1603)
+#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY		SMIAPP_REG_MK_U8(0x1604)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1608)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x160c)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1610)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1614)
+#define SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1618)
+#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1700)
+#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1702)
+#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1704)
+#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1706)
+#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN		SMIAPP_REG_MK_U16(0x1708)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN		SMIAPP_REG_MK_U16(0x170a)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	SMIAPP_REG_MK_U16(0x170c)
+#define SMIAPP_REG_U8_BINNING_CAPABILITY			SMIAPP_REG_MK_U8(0x1710)
+#define SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY		SMIAPP_REG_MK_U8(0x1711)
+#define SMIAPP_REG_U8_BINNING_SUBTYPES				SMIAPP_REG_MK_U8(0x1712)
+#define SMIAPP_REG_U8_BINNING_TYPE_n(n)				SMIAPP_REG_MK_U8(0x1713 + (n)) /* 1 <= n <= 237 */
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY		SMIAPP_REG_MK_U8(0x1800)
+#define SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U8(0x1900)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY		SMIAPP_REG_MK_U8(0x1901)
+#define SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY			SMIAPP_REG_MK_U8(0x1902)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY	SMIAPP_REG_MK_U8(0x1903)
+#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U16(0x1904)
+#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2		SMIAPP_REG_MK_U16(0x1906)
+#define SMIAPP_REG_U8_EDOF_CAPABILITY				SMIAPP_REG_MK_U8(0x1980)
+#define SMIAPP_REG_U8_ESTIMATION_FRAMES				SMIAPP_REG_MK_U8(0x1981)
+#define SMIAPP_REG_U8_SUPPORTS_SHARPNESS_ADJ			SMIAPP_REG_MK_U8(0x1982)
+#define SMIAPP_REG_U8_SUPPORTS_DENOISING_ADJ			SMIAPP_REG_MK_U8(0x1983)
+#define SMIAPP_REG_U8_SUPPORTS_MODULE_SPECIFIC_ADJ		SMIAPP_REG_MK_U8(0x1984)
+#define SMIAPP_REG_U8_SUPPORTS_DEPTH_OF_FIELD_ADJ		SMIAPP_REG_MK_U8(0x1985)
+#define SMIAPP_REG_U8_SUPPORTS_FOCUS_DISTANCE_ADJ		SMIAPP_REG_MK_U8(0x1986)
+#define SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY		SMIAPP_REG_MK_U8(0x1987)
+#define SMIAPP_REG_U8_EDOF_SUPPORT_AB_NXM			SMIAPP_REG_MK_U8(0x1988)
+#define SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c0)
+#define SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c1)
+#define SMIAPP_REG_U16_EST_DEPTH_OF_FIELD			SMIAPP_REG_MK_U16(0x19c2)
+#define SMIAPP_REG_U16_EST_FOCUS_DISTANCE			SMIAPP_REG_MK_U16(0x19c4)
+#define SMIAPP_REG_U16_CAPABILITY_TRDY_MIN			SMIAPP_REG_MK_U16(0x1a00)
+#define SMIAPP_REG_U8_FLASH_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1a02)
+#define SMIAPP_REG_U16_MECH_SHUT_AND_ACT_START_ADDR		SMIAPP_REG_MK_U16(0x1b02)
+#define SMIAPP_REG_U8_ACTUATOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1b04)
+#define SMIAPP_REG_U16_ACTUATOR_TYPE				SMIAPP_REG_MK_U16(0x1b40)
+#define SMIAPP_REG_U8_AF_DEVICE_ADDRESS				SMIAPP_REG_MK_U8(0x1b42)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_ADDRESS			SMIAPP_REG_MK_U16(0x1b44)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1		SMIAPP_REG_MK_U8(0x1c00)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2		SMIAPP_REG_MK_U8(0x1c01)
+#define SMIAPP_REG_U8_BRACKETING_LUT_SIZE			SMIAPP_REG_MK_U8(0x1c02)
diff --git a/drivers/media/video/smiapp/smiapp-reg.h b/drivers/media/video/smiapp/smiapp-reg.h
new file mode 100644
index 0000000..d0167aa
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-reg.h
@@ -0,0 +1,122 @@
+/*
+ * drivers/media/video/smiapp/smiapp-reg.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_REG_H_
+#define __SMIAPP_REG_H_
+
+#include "smiapp-reg-defs.h"
+
+/* Bits for above register */
+#define SMIAPP_IMAGE_ORIENTATION_HFLIP		(1 << 0)
+#define SMIAPP_IMAGE_ORIENTATION_VFLIP		(1 << 1)
+
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN		(1 << 0)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN		(0 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN		(1 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR	(1 << 2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY	(1 << 0)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY	(1 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA		(1 << 2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE		(1 << 3)
+
+#define SMIAPP_SOFTWARE_RESET				(1 << 0)
+
+#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE	(1 << 0)
+#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE	(1 << 1)
+
+#define SMIAPP_DPHY_CTRL_AUTOMATIC			0
+/* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */
+#define SMIAPP_DPHY_CTRL_UI				1
+#define SMIAPP_DPHY_CTRL_REGISTER			2
+
+#define SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR	1
+#define SMIAPP_COMPRESSION_MODE_ADVANCED_PREDICTOR	2
+
+#define SMIAPP_MODE_SELECT_SOFTWARE_STANDBY		0
+#define SMIAPP_MODE_SELECT_STREAMING			1
+
+#define SMIAPP_SCALING_MODE_NONE			0
+#define SMIAPP_SCALING_MODE_HORIZONTAL			1
+#define SMIAPP_SCALING_MODE_BOTH			2
+
+#define SMIAPP_SCALING_CAPABILITY_NONE			0
+#define SMIAPP_SCALING_CAPABILITY_HORIZONTAL		1
+#define SMIAPP_SCALING_CAPABILITY_BOTH			2 /* horizontal/both */
+
+/* digital crop right before scaler */
+#define SMIAPP_DIGITAL_CROP_CAPABILITY_NONE		0
+#define SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP	1
+
+#define SMIAPP_BINNING_CAPABILITY_NO			0
+#define SMIAPP_BINNING_CAPABILITY_YES			1
+
+/* Maximum number of binning subtypes */
+#define SMIAPP_BINNING_SUBTYPES				253
+
+#define SMIAPP_PIXEL_ORDER_GRBG				0
+#define SMIAPP_PIXEL_ORDER_RGGB				1
+#define SMIAPP_PIXEL_ORDER_BGGR				2
+#define SMIAPP_PIXEL_ORDER_GBRG				3
+
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL		1
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED		2
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N		8
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N	16
+
+#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE		0x01
+#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE		0x02
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK	0x0f
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK	0xf0
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT	4
+
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK	0xf000
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT	12
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK		0x0fff
+
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK	0xf0000000
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT	28
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK		0x0000ffff
+
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED	1
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY	2
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK	3
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK		4
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE	5
+
+#define SMIAPP_FAST_STANDBY_CTRL_COMPLETE_FRAMES	0
+#define SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE		1
+
+/* Scaling N factor */
+#define SMIAPP_SCALE_N					16
+
+/* Image statistics registers */
+/* Registers 0x2000 to 0x2fff are reserved for future
+ * use for statistics features.
+ */
+
+/* Manufacturer Specific Registers: 0x3000 to 0x3fff
+ * The manufacturer specifies these as a black box.
+ */
+
+#endif /* __SMIAPP_REG_H_ */
diff --git a/drivers/media/video/smiapp/smiapp-regs.c b/drivers/media/video/smiapp/smiapp-regs.c
new file mode 100644
index 0000000..4851ff7
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-regs.c
@@ -0,0 +1,213 @@
+/*
+ * drivers/media/video/smiapp/smiapp-regs.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+
+#include "smiapp-regs.h"
+
+static uint32_t float_to_u32_mul_1000000(struct i2c_client *client,
+					 uint32_t phloat)
+{
+	int32_t exp;
+	uint64_t man;
+
+	if (phloat >= 0x80000000) {
+		dev_err(&client->dev, "this is a negative number\n");
+		return 0;
+	}
+
+	if (phloat == 0x7f800000)
+		return ~0; /* Inf. */
+
+	if ((phloat & 0x7f800000) == 0x7f800000) {
+		dev_err(&client->dev, "NaN or other special number\n");
+		return 0;
+	}
+
+	/* Valid cases begin here */
+	if (phloat == 0)
+		return 0; /* Valid zero */
+
+	if (phloat > 0x4f800000)
+		return ~0; /* larger than 4294967295 */
+
+	/*
+	 * Unbias exponent (note how phloat is now guaranteed to
+	 * have 0 in the high bit)
+	 */
+	exp = ((int32_t)phloat >> 23) - 127;
+
+	/* Extract mantissa, add missing '1' bit and it's in MHz */
+	man = ((phloat & 0x7fffff) | 0x800000) * 1000000ULL;
+
+	if (exp < 0)
+		man >>= -exp;
+	else
+		man <<= exp;
+
+	man >>= 23; /* Remove mantissa bias */
+
+	return man & 0xffffffff;
+}
+
+
+/*
+ * Read a 8/16/32-bit i2c register.  The value is returned in 'val'.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+int smiapp_read(struct i2c_client *client, u32 reg, u32 *val)
+{
+	struct i2c_msg msg;
+	unsigned char data[4];
+	unsigned int len = (u8)(reg >> 16);
+	u16 offset = reg;
+	int r;
+
+	if (len != SMIA_REG_8BIT && len != SMIA_REG_16BIT
+	    && len != SMIA_REG_32BIT)
+		return -EINVAL;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = data;
+
+	/* high byte goes out first */
+	data[0] = (u8) (offset >> 8);
+	data[1] = (u8) offset;
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		if (r >= 0)
+			r = -EBUSY;
+		goto err;
+	}
+
+	msg.len = len;
+	msg.flags = I2C_M_RD;
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		if (r >= 0)
+			r = -EBUSY;
+		goto err;
+	}
+
+	*val = 0;
+	/* high byte comes first */
+	switch (len) {
+	case SMIA_REG_32BIT:
+		*val = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) +
+			data[3];
+		break;
+	case SMIA_REG_16BIT:
+		*val = (data[0] << 8) + data[1];
+		break;
+	case SMIA_REG_8BIT:
+		*val = data[0];
+		break;
+	default:
+		BUG();
+	}
+
+	if (reg & SMIA_REG_FLAG_FLOAT)
+		*val = float_to_u32_mul_1000000(client, *val);
+
+	return 0;
+
+err:
+	dev_err(&client->dev, "read from offset 0x%x error %d\n", offset, r);
+
+	return r;
+}
+
+/*
+ * Write to a 8/16-bit register.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+int smiapp_write(struct i2c_client *client, u32 reg, u32 val)
+{
+	struct i2c_msg msg;
+	unsigned char data[6];
+	unsigned int retries;
+	unsigned int flags = reg >> 24;
+	unsigned int len = (u8)(reg >> 16);
+	u16 offset = reg;
+	int r;
+
+	if ((len != SMIA_REG_8BIT && len != SMIA_REG_16BIT &&
+	     len != SMIA_REG_32BIT) || flags)
+		return -EINVAL;
+
+	msg.addr = client->addr;
+	msg.flags = 0; /* Write */
+	msg.len = 2 + len;
+	msg.buf = data;
+
+	/* high byte goes out first */
+	data[0] = (u8) (reg >> 8);
+	data[1] = (u8) (reg & 0xff);
+
+	switch (len) {
+	case SMIA_REG_8BIT:
+		data[2] = val;
+		break;
+	case SMIA_REG_16BIT:
+		data[2] = val >> 8;
+		data[3] = val;
+		break;
+	case SMIA_REG_32BIT:
+		data[2] = val >> 24;
+		data[3] = val >> 16;
+		data[4] = val >> 8;
+		data[5] = val;
+		break;
+	default:
+		BUG();
+	}
+
+	for (retries = 0; retries < 5; retries++) {
+		/*
+		 * Due to unknown reason sensor stops responding. This
+		 * loop is a temporaty solution until the root cause
+		 * is found.
+		 */
+		r = i2c_transfer(client->adapter, &msg, 1);
+		if (r == 1) {
+			if (retries)
+				dev_err(&client->dev,
+					"sensor i2c stall encountered. "
+					"retries: %d\n", retries);
+			return 0;
+		}
+
+		usleep_range(2000, 2000);
+	}
+
+	dev_err(&client->dev,
+		"wrote 0x%x to offset 0x%x error %d\n", val, offset, r);
+
+	return r;
+}
diff --git a/drivers/media/video/smiapp/smiapp-regs.h b/drivers/media/video/smiapp/smiapp-regs.h
new file mode 100644
index 0000000..58e8009
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-regs.h
@@ -0,0 +1,46 @@
+/*
+ * include/media/smiapp/smiapp-regs.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_REGS_H
+#define SMIAPP_REGS_H
+
+#include <linux/i2c.h>
+#include <linux/types.h>
+
+/* Use upper 8 bits of the type field for flags */
+#define SMIA_REG_FLAG_FLOAT		(1 << 24)
+
+#define SMIA_REG_8BIT			1
+#define SMIA_REG_16BIT			2
+#define SMIA_REG_32BIT			4
+struct smia_reg {
+	u16 type;
+	u16 reg;			/* 16-bit offset */
+	u32 val;			/* 8/16/32-bit value */
+};
+
+int smiapp_read(struct i2c_client *client, u32 reg, u32 *val);
+int smiapp_write(struct i2c_client *client, u32 reg, u32 val);
+
+#endif
diff --git a/drivers/media/video/smiapp/smiapp.h b/drivers/media/video/smiapp/smiapp.h
new file mode 100644
index 0000000..805d8c8
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp.h
@@ -0,0 +1,251 @@
+/*
+ * drivers/media/video/smiapp/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_PRIV_H_
+#define __SMIAPP_PRIV_H_
+
+#include <linux/mutex.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+#include <media/smiapp.h>
+
+#include "../smiapp-pll.h"
+#include "smiapp-reg.h"
+#include "smiapp-regs.h"
+#include "smiapp-quirk.h"
+
+/*
+ * Standard SMIA++ constants
+ */
+#define SMIA_VERSION_1			10
+#define SMIAPP_VERSION_0_8		8 /* Draft 0.8 */
+#define SMIAPP_VERSION_0_9		9 /* Draft 0.9 */
+#define SMIAPP_VERSION_1		10
+
+#define SMIAPP_PROFILE_0		0
+#define SMIAPP_PROFILE_1		1
+#define SMIAPP_PROFILE_2		2
+
+#define SMIAPP_NVM_PAGE_SIZE		64	/* bytes */
+
+#define SMIAPP_RESET_DELAY_CLOCKS	2400
+#define SMIAPP_RESET_DELAY(clk)				\
+	(1000 +	(SMIAPP_RESET_DELAY_CLOCKS * 1000	\
+		 + (clk) / 1000 - 1) / ((clk) / 1000))
+
+#include "smiapp-limits.h"
+
+struct smiapp_quirk;
+
+#define SMIAPP_MODULE_IDENT_FLAG_REV_LE		(1 << 0)
+
+struct smiapp_module_ident {
+	u8 manufacturer_id;
+	u16 model_id;
+	u8 revision_number_major;
+
+	u8 flags;
+
+	char *name;
+	const struct smiapp_quirk *quirk;
+};
+
+struct smiapp_module_info {
+	u32 manufacturer_id;
+	u32 model_id;
+	u32 revision_number_major;
+	u32 revision_number_minor;
+
+	u32 module_year;
+	u32 module_month;
+	u32 module_day;
+
+	u32 sensor_manufacturer_id;
+	u32 sensor_model_id;
+	u32 sensor_revision_number;
+	u32 sensor_firmware_version;
+
+	u32 smia_version;
+	u32 smiapp_version;
+
+	u32 smiapp_profile;
+
+	char *name;
+	const struct smiapp_quirk *quirk;
+};
+
+#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk)	\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = fl,							\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk)	\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT_L(manufacturer, model, rev, _name)			\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
+	  .name = _name, }
+
+#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk)		\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = 0,							\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT(manufacturer, model, rev, _name)			\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = 0,							\
+	  .name = _name, }
+
+struct smiapp_reg_limits {
+	u32 addr;
+	char *what;
+};
+
+extern struct smiapp_reg_limits smiapp_reg_limits[];
+
+struct smiapp_csi_data_format {
+	u32 code;
+	u8 width;
+	u8 compressed;
+	u8 pixel_order;
+};
+
+#define SMIAPP_SUBDEVS			3
+
+#define SMIAPP_PA_PAD_SRC		0
+#define SMIAPP_PAD_SINK			0
+#define SMIAPP_PAD_SRC			1
+#define SMIAPP_PADS			2
+
+struct smiapp_binning_subtype {
+	u8 horizontal:4;
+	u8 vertical:4;
+} __packed;
+
+struct smiapp_subdev {
+	struct v4l2_subdev sd;
+	struct media_pad pads[2];
+	struct v4l2_rect sink_fmt;
+	struct v4l2_rect crop[2];
+	struct v4l2_rect compose; /* compose on sink */
+	unsigned short sink_pad;
+	unsigned short source_pad;
+	int npads;
+	struct smiapp_sensor *sensor;
+	struct v4l2_ctrl_handler ctrl_handler;
+};
+
+/*
+ * struct smiapp_sensor - Main device structure
+ */
+struct smiapp_sensor {
+	/*
+	 * "mutex" is used to serialise access to all fields here
+	 * except v4l2_ctrls at the end of the struct. "mutex" is also
+	 * used to serialise access to file handle specific
+	 * information. The exception to this rule is the power_mutex
+	 * below.
+	 */
+	struct mutex mutex;
+	/*
+	 * power_mutex is used to serialise power management related
+	 * activities. Acquiring "mutex" at that time isn't necessary
+	 * since there are no other users anyway.
+	 */
+	struct mutex power_mutex;
+	struct smiapp_subdev ssds[SMIAPP_SUBDEVS];
+	u32 ssds_used;
+	struct smiapp_subdev *src;
+	struct smiapp_subdev *binner;
+	struct smiapp_subdev *scaler;
+	struct smiapp_subdev *pixel_array;
+	struct smiapp_platform_data *platform_data;
+	struct regulator *vana;
+	u32 limits[SMIAPP_LIMIT_LAST];
+	u8 nbinning_subtypes;
+	struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES];
+	u32 mbus_frame_fmts;
+	const struct smiapp_csi_data_format *csi_format;
+	const struct smiapp_csi_data_format *internal_csi_format;
+	u32 default_mbus_frame_fmts;
+	int default_pixel_order;
+
+	u8 binning_horizontal;
+	u8 binning_vertical;
+
+	u8 scale_m;
+	u8 scaling_mode;
+
+	u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */
+	u8 flash_capability;
+	u8 frame_skip;
+
+	int power_count;
+
+	bool streaming;
+	bool dev_init_done;
+
+	u8 *nvm;		/* nvm memory buffer */
+	unsigned int nvm_size;	/* bytes */
+
+	struct smiapp_module_info minfo;
+
+	struct smiapp_pll pll;
+
+	/* Pixel array controls */
+	struct v4l2_ctrl *analog_gain;
+	struct v4l2_ctrl *exposure;
+	struct v4l2_ctrl *hflip;
+	struct v4l2_ctrl *vflip;
+	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *pixel_rate_parray;
+	/* src controls */
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *pixel_rate_csi;
+};
+
+#define to_smiapp_subdev(_sd)				\
+	container_of(_sd, struct smiapp_subdev, sd)
+
+#define to_smiapp_sensor(_sd)	\
+	(to_smiapp_subdev(_sd)->sensor)
+
+#endif /* __SMIAPP_PRIV_H_ */
diff --git a/include/media/smiapp.h b/include/media/smiapp.h
new file mode 100644
index 0000000..a7877cd
--- /dev/null
+++ b/include/media/smiapp.h
@@ -0,0 +1,83 @@
+/*
+ * include/media/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_H_
+#define __SMIAPP_H_
+
+#include <media/v4l2-subdev.h>
+
+#define SMIAPP_NAME		"smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR	(0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR	(0x6e >> 1) /* Alternate I2C Address */
+
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK	0
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE	1
+#define SMIAPP_CSI_SIGNALLING_MODE_CSI2			2
+
+#define SMIAPP_NO_XSHUTDOWN	-1
+
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+	SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+	SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+	u8 mode;
+	u32 strobe_width_high_us;
+	u16 strobe_delay;
+	u16 stobe_start_point;
+	u8 trigger;
+};
+
+struct smiapp_platform_data {
+	/*
+	 * Change the cci address if i2c_addr_alt is set.
+	 * Both default and alternate cci addr need to be present
+	 */
+	unsigned short i2c_addr_dfl;	/* Default i2c addr */
+	unsigned short i2c_addr_alt;	/* Alternate i2c addr */
+
+	unsigned int nvm_size;			/* bytes */
+	unsigned int ext_clk;			/* sensor external clk */
+
+	unsigned int lanes;		/* Number of CSI-2 lanes */
+	u8 csi_signalling_mode;		/* SMIAPP_CSI_SIGNALLING_MODE_* */
+	const s64 *op_sys_clock;
+
+	enum smiapp_module_board_orient module_board_orient;
+
+	struct smiapp_flash_strobe_parms *strobe_setup;
+
+	int (*set_xclk)(struct v4l2_subdev *sd, int hz);
+	int xshutdown;			/* gpio or SMIAPP_NO_XSHUTDOWN */
+};
+
+#endif /* __SMIAPP_H_  */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.1 35/35] smiapp: Add driver
  2012-03-08 13:57     ` [PATCH v5.1 35/35] smiapp: Add driver Sakari Ailus
@ 2012-03-08 14:46       ` Laurent Pinchart
  2012-03-08 16:49         ` [PATCH v5.3 " Sakari Ailus
  2012-03-08 15:06       ` [PATCH v5.1 " jean-philippe francois
  1 sibling, 1 reply; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-08 14:46 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Thursday 08 March 2012 15:57:30 Sakari Ailus wrote:
> Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
> three subdevs, pixel array, binner and scaler --- in case the device has a
> scaler.

> Currently it relies on the board code for external clock handling. There is
> no fast way out of this dependency before the ISP drivers (omap3isp) among
> others will be able to export that clock through the clock framework
> instead.

[snip]

> +static int smiapp_set_format(struct v4l2_subdev *subdev,
> +                            struct v4l2_subdev_fh *fh,
> +                            struct v4l2_subdev_format *fmt)
> +{
> +       struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
> +       struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
> +       struct v4l2_rect *crops[SMIAPP_PADS];
> +       const struct smiapp_csi_data_format *csi_format = sensor-
> >csi_format;
> +       unsigned i;
> +
> +       mutex_lock(&sensor->mutex);
> +
> +       smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
> +
> +       if (subdev == &sensor->src->sd && fmt->pad == SMIAPP_PAD_SRC) {
> +               for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
> +                       if (sensor->mbus_frame_fmts & (1 << i) &&
> +                           smiapp_csi_data_formats[i].code
> +                           == fmt->format.code) {
> +                               csi_format = &smiapp_csi_data_formats[i];
> +                               if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +                                       sensor->csi_format = csi_format;
> +                               break;
> +                       }
> +               }
> +       }
> +
> +       if (fmt->pad == ssd->source_pad) {
> +               int rval;
> +
> +               rval = __smiapp_get_format(subdev, fh, fmt);
> +               fmt->format.code = csi_format->code;
> +
> +               mutex_unlock(&sensor->mutex);
> +               return rval;
> +       }

That's still not good I'm afraid. The pixel array source format code will be 
set to the sensor source format code, which isn't right.

> +
> +       fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
> +       fmt->format.width &= ~1;
> +       fmt->format.height &= ~1;
> +
> +       fmt->format.width =
> +               clamp(fmt->format.width,
> +                     sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
> +                     sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
> +       fmt->format.height =
> +               clamp(fmt->format.height,
> +                     sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
> +                     sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
> +
> +       crops[ssd->sink_pad]->left = 0;
> +       crops[ssd->sink_pad]->top = 0;
> +       crops[ssd->sink_pad]->width = fmt->format.width;
> +       crops[ssd->sink_pad]->height = fmt->format.height;
> +       if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +               ssd->sink_fmt = *crops[ssd->sink_pad];
> +       smiapp_propagate(subdev, fh, fmt->which,
> +                        V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
> +
> +       mutex_unlock(&sensor->mutex);
> +
> +       return 0;
> +}

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.3 35/35] smiapp: Add driver
  2012-03-08 14:46       ` Laurent Pinchart
@ 2012-03-08 16:49         ` Sakari Ailus
  2012-03-11 13:37           ` Laurent Pinchart
  0 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-08 16:49 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
three subdevs, pixel array, binner and scaler --- in case the device has a
scaler.

Currently it relies on the board code for external clock handling. There is
no fast way out of this dependency before the ISP drivers (omap3isp) among
others will be able to export that clock through the clock framework
instead.

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
---
 drivers/media/video/Kconfig                  |    2 +
 drivers/media/video/Makefile                 |    1 +
 drivers/media/video/smiapp-pll.c             |    2 +
 drivers/media/video/smiapp/Kconfig           |   13 +
 drivers/media/video/smiapp/Makefile          |    3 +
 drivers/media/video/smiapp/smiapp-core.c     | 2831 ++++++++++++++++++++++++++
 drivers/media/video/smiapp/smiapp-debug.h    |   32 +
 drivers/media/video/smiapp/smiapp-limits.c   |  132 ++
 drivers/media/video/smiapp/smiapp-limits.h   |  128 ++
 drivers/media/video/smiapp/smiapp-quirk.c    |  264 +++
 drivers/media/video/smiapp/smiapp-quirk.h    |   72 +
 drivers/media/video/smiapp/smiapp-reg-defs.h |  503 +++++
 drivers/media/video/smiapp/smiapp-reg.h      |  122 ++
 drivers/media/video/smiapp/smiapp-regs.c     |  213 ++
 drivers/media/video/smiapp/smiapp-regs.h     |   46 +
 drivers/media/video/smiapp/smiapp.h          |  251 +++
 include/media/smiapp.h                       |   83 +
 17 files changed, 4698 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/smiapp/Kconfig
 create mode 100644 drivers/media/video/smiapp/Makefile
 create mode 100644 drivers/media/video/smiapp/smiapp-core.c
 create mode 100644 drivers/media/video/smiapp/smiapp-debug.h
 create mode 100644 drivers/media/video/smiapp/smiapp-limits.c
 create mode 100644 drivers/media/video/smiapp/smiapp-limits.h
 create mode 100644 drivers/media/video/smiapp/smiapp-quirk.c
 create mode 100644 drivers/media/video/smiapp/smiapp-quirk.h
 create mode 100644 drivers/media/video/smiapp/smiapp-reg-defs.h
 create mode 100644 drivers/media/video/smiapp/smiapp-reg.h
 create mode 100644 drivers/media/video/smiapp/smiapp-regs.c
 create mode 100644 drivers/media/video/smiapp/smiapp-regs.h
 create mode 100644 drivers/media/video/smiapp/smiapp.h
 create mode 100644 include/media/smiapp.h

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 7eac873..1aaeb04 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -527,6 +527,8 @@ config VIDEO_S5K6AA
 	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
 	  camera sensor with an embedded SoC image signal processor.
 
+source "drivers/media/video/smiapp/Kconfig"
+
 comment "Flash devices"
 
 config VIDEO_ADP1653
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2fed63d..b74f15f 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
 obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
+obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp/
 obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
 
diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/video/smiapp-pll.c
index be63bb4..326bd0e 100644
--- a/drivers/media/video/smiapp-pll.c
+++ b/drivers/media/video/smiapp-pll.c
@@ -22,6 +22,8 @@
  *
  */
 
+#include "smiapp/smiapp-debug.h"
+
 #include <linux/gcd.h>
 #include <linux/lcm.h>
 #include <linux/module.h>
diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig
new file mode 100644
index 0000000..9504c43
--- /dev/null
+++ b/drivers/media/video/smiapp/Kconfig
@@ -0,0 +1,13 @@
+config VIDEO_SMIAPP
+	tristate "SMIA++/SMIA sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	select VIDEO_SMIAPP_PLL
+	---help---
+	  This is a generic driver for SMIA++/SMIA camera modules.
+
+config VIDEO_SMIAPP_DEBUG
+	bool "Enable debugging for the generic SMIA++/SMIA driver"
+	depends on VIDEO_SMIAPP
+	---help---
+	  Enable debugging output in the generic SMIA++/SMIA driver. If you
+	  are developing the driver you might want to enable this.
diff --git a/drivers/media/video/smiapp/Makefile b/drivers/media/video/smiapp/Makefile
new file mode 100644
index 0000000..5a207ee
--- /dev/null
+++ b/drivers/media/video/smiapp/Makefile
@@ -0,0 +1,3 @@
+smiapp-objs			+= smiapp-core.o smiapp-regs.o \
+				   smiapp-quirk.o smiapp-limits.o
+obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp.o
diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c
new file mode 100644
index 0000000..68f4397
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-core.c
@@ -0,0 +1,2831 @@
+/*
+ * drivers/media/video/smiapp/smiapp-core.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Based on smiapp driver by Vimarsh Zutshi
+ * Based on jt8ev1.c by Vimarsh Zutshi
+ * Based on smia-sensor.c by Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/v4l2-mediabus.h>
+#include <media/v4l2-device.h>
+
+#include "smiapp.h"
+
+#define SMIAPP_ALIGN_DIM(dim, flags)		\
+	((flags) & V4L2_SUBDEV_SEL_FLAG_SIZE_GE	\
+	 ? ALIGN((dim), 2)			\
+	 : (dim) & ~1)
+
+/*
+ * smiapp_module_idents - supported camera modules
+ */
+static const struct smiapp_module_ident smiapp_module_idents[] = {
+	SMIAPP_IDENT_L(0x01, 0x022b, -1, "vs6555"),
+	SMIAPP_IDENT_L(0x01, 0x022e, -1, "vw6558"),
+	SMIAPP_IDENT_L(0x07, 0x7698, -1, "ovm7698"),
+	SMIAPP_IDENT_L(0x0b, 0x4242, -1, "smiapp-003"),
+	SMIAPP_IDENT_L(0x0c, 0x208a, -1, "tcm8330md"),
+	SMIAPP_IDENT_LQ(0x0c, 0x2134, -1, "tcm8500md", &smiapp_tcm8500md_quirk),
+	SMIAPP_IDENT_L(0x0c, 0x213e, -1, "et8en2"),
+	SMIAPP_IDENT_L(0x0c, 0x2184, -1, "tcm8580md"),
+	SMIAPP_IDENT_LQ(0x0c, 0x560f, -1, "jt8ew9", &smiapp_jt8ew9_quirk),
+	SMIAPP_IDENT_LQ(0x10, 0x4141, -1, "jt8ev1", &smiapp_jt8ev1_quirk),
+	SMIAPP_IDENT_LQ(0x10, 0x4241, -1, "imx125es", &smiapp_imx125es_quirk),
+};
+
+/*
+ *
+ * Dynamic Capability Identification
+ *
+ */
+
+static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc;
+	unsigned int i;
+	int rval;
+	int line_count = 0;
+	int embedded_start = -1, embedded_end = -1;
+	int image_start = 0;
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE,
+			   &fmt_model_type);
+	if (rval)
+		return rval;
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE,
+			   &fmt_model_subtype);
+	if (rval)
+		return rval;
+
+	ncol_desc = (fmt_model_subtype
+		     & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK)
+		>> SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT;
+	nrow_desc = fmt_model_subtype
+		& SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK;
+
+	dev_dbg(&client->dev, "format_model_type %s\n",
+		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE
+		? "2 byte" :
+		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE
+		? "4 byte" : "is simply bad");
+
+	for (i = 0; i < ncol_desc + nrow_desc; i++) {
+		u32 desc;
+		u32 pixelcode;
+		u32 pixels;
+		char *which;
+		char *what;
+
+		if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i),
+				&desc);
+			if (rval)
+				return rval;
+
+			pixelcode =
+				(desc
+				 & SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK)
+				>> SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT;
+			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK;
+		} else if (fmt_model_type
+			   == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i),
+				&desc);
+			if (rval)
+				return rval;
+
+			pixelcode =
+				(desc
+				 & SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK)
+				>> SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT;
+			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK;
+		} else {
+			dev_dbg(&client->dev,
+				"invalid frame format model type %d\n",
+				fmt_model_type);
+			return -EINVAL;
+		}
+
+		if (i < ncol_desc)
+			which = "columns";
+		else
+			which = "rows";
+
+		switch (pixelcode) {
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED:
+			what = "embedded";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY:
+			what = "dummy";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK:
+			what = "black";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK:
+			what = "dark";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE:
+			what = "visible";
+			break;
+		default:
+			what = "invalid";
+			dev_dbg(&client->dev, "pixelcode %d\n", pixelcode);
+			break;
+		}
+
+		dev_dbg(&client->dev, "%s pixels: %d %s\n",
+			what, pixels, which);
+
+		if (i < ncol_desc)
+			continue;
+
+		/* Handle row descriptors */
+		if (pixelcode
+		    == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED) {
+			embedded_start = line_count;
+		} else {
+			if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE
+			    || pixels >= sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES] / 2)
+				image_start = line_count;
+			if (embedded_start != -1 && embedded_end == -1)
+				embedded_end = line_count;
+		}
+		line_count += pixels;
+	}
+
+	if (embedded_start == -1 || embedded_end == -1) {
+		embedded_start = 0;
+		embedded_end = 0;
+	}
+
+	dev_dbg(&client->dev, "embedded data from lines %d to %d\n",
+		embedded_start, embedded_end);
+	dev_dbg(&client->dev, "image data starts at line %d\n", image_start);
+
+	return 0;
+}
+
+static int smiapp_pll_configure(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_pll *pll = &sensor->pll;
+	int rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_VT_PIX_CLK_DIV, pll->vt_pix_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_VT_SYS_CLK_DIV, pll->vt_sys_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_PRE_PLL_CLK_DIV, pll->pre_pll_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_PLL_MULTIPLIER, pll->pll_multiplier);
+	if (rval < 0)
+		return rval;
+
+	/* Lane op clock ratio does not apply here. */
+	rval = smiapp_write(
+		client, SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS,
+		DIV_ROUND_UP(pll->op_sys_clk_freq_hz, 1000000 / 256 / 256));
+	if (rval < 0 || sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_OP_PIX_CLK_DIV, pll->op_pix_clk_div);
+	if (rval < 0)
+		return rval;
+
+	return smiapp_write(
+		client, SMIAPP_REG_U16_OP_SYS_CLK_DIV, pll->op_sys_clk_div);
+}
+
+static int smiapp_pll_update(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_pll_limits lim = {
+		.min_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV],
+		.max_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV],
+		.min_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ],
+		.max_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ],
+		.min_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MIN_PLL_MULTIPLIER],
+		.max_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MAX_PLL_MULTIPLIER],
+		.min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ],
+		.max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ],
+
+		.min_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV],
+		.max_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV],
+		.min_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV],
+		.max_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV],
+		.min_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ],
+		.max_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ],
+		.min_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ],
+		.max_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ],
+
+		.min_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV],
+		.max_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV],
+		.min_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV],
+		.max_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV],
+		.min_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ],
+		.max_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ],
+		.min_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ],
+		.max_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ],
+
+		.min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN],
+		.min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK],
+	};
+	struct smiapp_pll *pll = &sensor->pll;
+	int rval;
+
+	memset(&sensor->pll, 0, sizeof(sensor->pll));
+
+	pll->lanes = sensor->platform_data->lanes;
+	pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
+
+	if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) {
+		/*
+		 * Fill in operational clock divisors limits from the
+		 * video timing ones. On profile 0 sensors the
+		 * requirements regarding them are essentially the
+		 * same as on VT ones.
+		 */
+		lim.min_op_sys_clk_div = lim.min_vt_sys_clk_div;
+		lim.max_op_sys_clk_div = lim.max_vt_sys_clk_div;
+		lim.min_op_pix_clk_div = lim.min_vt_pix_clk_div;
+		lim.max_op_pix_clk_div = lim.max_vt_pix_clk_div;
+		lim.min_op_sys_clk_freq_hz = lim.min_vt_sys_clk_freq_hz;
+		lim.max_op_sys_clk_freq_hz = lim.max_vt_sys_clk_freq_hz;
+		lim.min_op_pix_clk_freq_hz = lim.min_vt_pix_clk_freq_hz;
+		lim.max_op_pix_clk_freq_hz = lim.max_vt_pix_clk_freq_hz;
+		/* Profile 0 sensors have no separate OP clock branch. */
+		pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
+	}
+
+	if (smiapp_needs_quirk(sensor,
+			       SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE))
+		pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
+
+	pll->binning_horizontal = sensor->binning_horizontal;
+	pll->binning_vertical = sensor->binning_vertical;
+	pll->link_freq =
+		sensor->link_freq->qmenu_int[sensor->link_freq->val];
+	pll->scale_m = sensor->scale_m;
+	pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+	pll->bits_per_pixel = sensor->csi_format->compressed;
+
+	rval = smiapp_pll_calculate(&client->dev, &lim, pll);
+	if (rval < 0)
+		return rval;
+
+	sensor->pixel_rate_parray->cur.val64 = pll->vt_pix_clk_freq_hz;
+	sensor->pixel_rate_csi->cur.val64 = pll->pixel_rate_csi;
+
+	return 0;
+}
+
+
+/*
+ *
+ * V4L2 Controls handling
+ *
+ */
+
+static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor)
+{
+	struct v4l2_ctrl *ctrl = sensor->exposure;
+	int max;
+
+	max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+		+ sensor->vblank->val
+		- sensor->limits[SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN];
+
+	ctrl->maximum = max;
+	if (ctrl->default_value > max)
+		ctrl->default_value = max;
+	if (ctrl->val > max)
+		ctrl->val = max;
+	if (ctrl->cur.val > max)
+		ctrl->cur.val = max;
+}
+
+/*
+ * Order matters.
+ *
+ * 1. Bits-per-pixel, descending.
+ * 2. Bits-per-pixel compressed, descending.
+ * 3. Pixel order, same as in pixel_order_str. Formats for all four pixel
+ *    orders must be defined.
+ */
+static const struct smiapp_csi_data_format smiapp_csi_data_formats[] = {
+	{ V4L2_MBUS_FMT_SGRBG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GBRG, },
+	{ V4L2_MBUS_FMT_SGRBG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GBRG, },
+	{ V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GBRG, },
+};
+
+const char *pixel_order_str[] = { "GRBG", "RGGB", "BGGR", "GBRG" };
+
+#define to_csi_format_idx(fmt) (((unsigned long)(fmt)			\
+				 - (unsigned long)smiapp_csi_data_formats) \
+				/ sizeof(*smiapp_csi_data_formats))
+
+static u32 smiapp_pixel_order(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int flip = 0;
+
+	if (sensor->hflip) {
+		if (sensor->hflip->val)
+			flip |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
+
+		if (sensor->vflip->val)
+			flip |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
+	}
+
+	flip ^= sensor->hvflip_inv_mask;
+
+	dev_dbg(&client->dev, "flip %d\n", flip);
+	return sensor->default_pixel_order ^ flip;
+}
+
+static void smiapp_update_mbus_formats(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int csi_format_idx =
+		to_csi_format_idx(sensor->csi_format) & ~3;
+	unsigned int internal_csi_format_idx =
+		to_csi_format_idx(sensor->internal_csi_format) & ~3;
+	unsigned int pixel_order = smiapp_pixel_order(sensor);
+
+	sensor->mbus_frame_fmts =
+		sensor->default_mbus_frame_fmts << pixel_order;
+	sensor->csi_format =
+		&smiapp_csi_data_formats[csi_format_idx + pixel_order];
+	sensor->internal_csi_format =
+		&smiapp_csi_data_formats[internal_csi_format_idx
+					 + pixel_order];
+
+	BUG_ON(max(internal_csi_format_idx, csi_format_idx) + pixel_order
+	       >= ARRAY_SIZE(smiapp_csi_data_formats));
+	BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0);
+
+	dev_dbg(&client->dev, "new pixel order %s\n",
+		pixel_order_str[pixel_order]);
+}
+
+static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct smiapp_sensor *sensor =
+		container_of(ctrl->handler, struct smiapp_subdev, ctrl_handler)
+			->sensor;
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 orient = 0;
+	int exposure;
+	int rval;
+
+	switch (ctrl->id) {
+	case V4L2_CID_ANALOGUE_GAIN:
+		return smiapp_write(
+			client,
+			SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL, ctrl->val);
+
+	case V4L2_CID_EXPOSURE:
+		return smiapp_write(
+			client,
+			SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val);
+
+	case V4L2_CID_HFLIP:
+	case V4L2_CID_VFLIP:
+		if (sensor->streaming)
+			return -EBUSY;
+
+		if (sensor->hflip->val)
+			orient |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
+
+		if (sensor->vflip->val)
+			orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
+
+		orient ^= sensor->hvflip_inv_mask;
+		rval = smiapp_write(client,
+				    SMIAPP_REG_U8_IMAGE_ORIENTATION,
+				    orient);
+		if (rval < 0)
+			return rval;
+
+		smiapp_update_mbus_formats(sensor);
+
+		return 0;
+
+	case V4L2_CID_VBLANK:
+		exposure = sensor->exposure->val;
+
+		__smiapp_update_exposure_limits(sensor);
+
+		if (exposure > sensor->exposure->maximum) {
+			sensor->exposure->val =
+				sensor->exposure->maximum;
+			rval = smiapp_set_ctrl(
+				sensor->exposure);
+			if (rval < 0)
+				return rval;
+		}
+
+		return smiapp_write(
+			client, SMIAPP_REG_U16_FRAME_LENGTH_LINES,
+			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+			+ ctrl->val);
+
+	case V4L2_CID_HBLANK:
+		return smiapp_write(
+			client, SMIAPP_REG_U16_LINE_LENGTH_PCK,
+			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
+			+ ctrl->val);
+
+	case V4L2_CID_LINK_FREQ:
+		if (sensor->streaming)
+			return -EBUSY;
+
+		return smiapp_pll_update(sensor);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct v4l2_ctrl_ops smiapp_ctrl_ops = {
+	.s_ctrl = smiapp_set_ctrl,
+};
+
+static int smiapp_init_controls(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct v4l2_ctrl_config cfg;
+	int rval;
+
+	rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 7);
+	if (rval)
+		return rval;
+	sensor->pixel_array->ctrl_handler.lock = &sensor->mutex;
+
+	sensor->analog_gain = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_ANALOGUE_GAIN,
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN],
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX],
+		max(sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP], 1U),
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN]);
+
+	/* Exposure limits will be updated soon, use just something here. */
+	sensor->exposure = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_EXPOSURE, 0, 0, 1, 0);
+
+	sensor->hflip = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_HFLIP, 0, 1, 1, 0);
+	sensor->vflip = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_VFLIP, 0, 1, 1, 0);
+
+	sensor->vblank = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_VBLANK, 0, 1, 1, 0);
+
+	if (sensor->vblank)
+		sensor->vblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
+	sensor->hblank = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_HBLANK, 0, 1, 1, 0);
+
+	if (sensor->hblank)
+		sensor->hblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
+	sensor->pixel_rate_parray = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
+
+	if (sensor->pixel_array->ctrl_handler.error) {
+		dev_err(&client->dev,
+			"pixel array controls initialization failed (%d)\n",
+			sensor->pixel_array->ctrl_handler.error);
+		rval = sensor->pixel_array->ctrl_handler.error;
+		goto error;
+	}
+
+	sensor->pixel_array->sd.ctrl_handler =
+		&sensor->pixel_array->ctrl_handler;
+
+	v4l2_ctrl_cluster(2, &sensor->hflip);
+
+	rval = v4l2_ctrl_handler_init(&sensor->src->ctrl_handler, 0);
+	if (rval)
+		goto error;
+	sensor->src->ctrl_handler.lock = &sensor->mutex;
+
+	memset(&cfg, 0, sizeof(cfg));
+
+	cfg.ops = &smiapp_ctrl_ops;
+	cfg.id = V4L2_CID_LINK_FREQ;
+	cfg.type = V4L2_CTRL_TYPE_INTEGER_MENU;
+	while (sensor->platform_data->op_sys_clock[cfg.max + 1])
+		cfg.max++;
+	cfg.qmenu_int = sensor->platform_data->op_sys_clock;
+
+	sensor->link_freq = v4l2_ctrl_new_custom(
+		&sensor->src->ctrl_handler, &cfg, NULL);
+
+	sensor->pixel_rate_csi = v4l2_ctrl_new_std(
+		&sensor->src->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
+
+	if (sensor->src->ctrl_handler.error) {
+		dev_err(&client->dev,
+			"src controls initialization failed (%d)\n",
+			sensor->src->ctrl_handler.error);
+		rval = sensor->src->ctrl_handler.error;
+		goto error;
+	}
+
+	sensor->src->sd.ctrl_handler =
+		&sensor->src->ctrl_handler;
+
+	return 0;
+
+error:
+	v4l2_ctrl_handler_free(&sensor->pixel_array->ctrl_handler);
+	v4l2_ctrl_handler_free(&sensor->src->ctrl_handler);
+
+	return rval;
+}
+
+static void smiapp_free_controls(struct smiapp_sensor *sensor)
+{
+	unsigned int i;
+
+	for (i = 0; i < sensor->ssds_used; i++)
+		v4l2_ctrl_handler_free(&sensor->ssds[i].ctrl_handler);
+}
+
+static int smiapp_get_limits(struct smiapp_sensor *sensor, int const *limit,
+			     unsigned int n)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int i;
+	u32 val;
+	int rval;
+
+	for (i = 0; i < n; i++) {
+		rval = smiapp_read(
+			client, smiapp_reg_limits[limit[i]].addr, &val);
+		if (rval)
+			return rval;
+		sensor->limits[limit[i]] = val;
+		dev_dbg(&client->dev, "0x%8.8x \"%s\" = %d, 0x%x\n",
+			smiapp_reg_limits[limit[i]].addr,
+			smiapp_reg_limits[limit[i]].what, val, val);
+	}
+
+	return 0;
+}
+
+static int smiapp_get_all_limits(struct smiapp_sensor *sensor)
+{
+	unsigned int i;
+	int rval;
+
+	for (i = 0; i < SMIAPP_LIMIT_LAST; i++) {
+		rval = smiapp_get_limits(sensor, &i, 1);
+		if (rval < 0)
+			return rval;
+	}
+
+	if (sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] == 0)
+		smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16);
+
+	return 0;
+}
+
+static int smiapp_get_limits_binning(struct smiapp_sensor *sensor)
+{
+	static u32 const limits[] = {
+		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN,
+		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN,
+		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN,
+		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN,
+		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN,
+	};
+	static u32 const limits_replace[] = {
+		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES,
+		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES,
+		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK,
+		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK,
+		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN,
+	};
+
+	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY] ==
+	    SMIAPP_BINNING_CAPABILITY_NO) {
+		unsigned int i;
+
+		for (i = 0; i < ARRAY_SIZE(limits); i++)
+			sensor->limits[limits[i]] =
+				sensor->limits[limits_replace[i]];
+
+		return 0;
+	}
+
+	return smiapp_get_limits(sensor, limits, ARRAY_SIZE(limits));
+}
+
+static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int type, n;
+	unsigned int i, pixel_order;
+	int rval;
+
+	rval = smiapp_read(
+		client, SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE, &type);
+	if (rval)
+		return rval;
+
+	dev_dbg(&client->dev, "data_format_model_type %d\n", type);
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_PIXEL_ORDER,
+			   &pixel_order);
+	if (rval)
+		return rval;
+
+	if (pixel_order >= ARRAY_SIZE(pixel_order_str)) {
+		dev_dbg(&client->dev, "bad pixel order %d\n", pixel_order);
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->dev, "pixel order %d (%s)\n", pixel_order,
+		pixel_order_str[pixel_order]);
+
+	switch (type) {
+	case SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL:
+		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N;
+		break;
+	case SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED:
+		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sensor->default_pixel_order = pixel_order;
+	sensor->mbus_frame_fmts = 0;
+
+	for (i = 0; i < n; i++) {
+		unsigned int fmt, j;
+
+		rval = smiapp_read(
+			client,
+			SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(i), &fmt);
+		if (rval)
+			return rval;
+
+		dev_dbg(&client->dev, "bpp %d, compressed %d\n",
+			fmt >> 8, (u8)fmt);
+
+		for (j = 0; j < ARRAY_SIZE(smiapp_csi_data_formats); j++) {
+			const struct smiapp_csi_data_format *f =
+				&smiapp_csi_data_formats[j];
+
+			if (f->pixel_order != SMIAPP_PIXEL_ORDER_GRBG)
+				continue;
+
+			if (f->width != fmt >> 8 || f->compressed != (u8)fmt)
+				continue;
+
+			dev_dbg(&client->dev, "jolly good! %d\n", j);
+
+			sensor->default_mbus_frame_fmts |= 1 << j;
+			if (!sensor->csi_format) {
+				sensor->csi_format = f;
+				sensor->internal_csi_format = f;
+			}
+		}
+	}
+
+	if (!sensor->csi_format) {
+		dev_err(&client->dev, "no supported mbus code found\n");
+		return -EINVAL;
+	}
+
+	smiapp_update_mbus_formats(sensor);
+
+	return 0;
+}
+
+static void smiapp_update_blanking(struct smiapp_sensor *sensor)
+{
+	struct v4l2_ctrl *vblank = sensor->vblank;
+	struct v4l2_ctrl *hblank = sensor->hblank;
+
+	vblank->minimum =
+		max_t(int,
+		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES],
+		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] -
+		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height);
+	vblank->maximum =
+		sensor->limits[SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN] -
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height;
+
+	vblank->val = clamp_t(int, vblank->val,
+			      vblank->minimum, vblank->maximum);
+	vblank->default_value = vblank->minimum;
+	vblank->val = vblank->val;
+	vblank->cur.val = vblank->val;
+
+	hblank->minimum =
+		max_t(int,
+		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] -
+		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width,
+		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]);
+	hblank->maximum =
+		sensor->limits[SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN] -
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width;
+
+	hblank->val = clamp_t(int, hblank->val,
+			      hblank->minimum, hblank->maximum);
+	hblank->default_value = hblank->minimum;
+	hblank->val = hblank->val;
+	hblank->cur.val = hblank->val;
+
+	__smiapp_update_exposure_limits(sensor);
+}
+
+static int smiapp_update_mode(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int binning_mode;
+	int rval;
+
+	dev_dbg(&client->dev, "frame size: %dx%d\n",
+		sensor->src->crop[SMIAPP_PAD_SRC].width,
+		sensor->src->crop[SMIAPP_PAD_SRC].height);
+	dev_dbg(&client->dev, "csi format width: %d\n",
+		sensor->csi_format->width);
+
+	/* Binning has to be set up here; it affects limits */
+	if (sensor->binning_horizontal == 1 &&
+	    sensor->binning_vertical == 1) {
+		binning_mode = 0;
+	} else {
+		u8 binning_type =
+			(sensor->binning_horizontal << 4)
+			| sensor->binning_vertical;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U8_BINNING_TYPE, binning_type);
+		if (rval < 0)
+			return rval;
+
+		binning_mode = 1;
+	}
+	rval = smiapp_write(client, SMIAPP_REG_U8_BINNING_MODE, binning_mode);
+	if (rval < 0)
+		return rval;
+
+	/* Get updated limits due to binning */
+	rval = smiapp_get_limits_binning(sensor);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_pll_update(sensor);
+	if (rval < 0)
+		return rval;
+
+	/* Output from pixel array, including blanking */
+	smiapp_update_blanking(sensor);
+
+	dev_dbg(&client->dev, "vblank\t\t%d\n", sensor->vblank->val);
+	dev_dbg(&client->dev, "hblank\t\t%d\n", sensor->hblank->val);
+
+	dev_dbg(&client->dev, "real timeperframe\t100/%d\n",
+		sensor->pll.vt_pix_clk_freq_hz /
+		((sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
+		  + sensor->hblank->val) *
+		 (sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+		  + sensor->vblank->val) / 100));
+
+	return 0;
+}
+
+/*
+ *
+ * SMIA++ NVM handling
+ *
+ */
+static int smiapp_read_nvm(struct smiapp_sensor *sensor,
+			   unsigned char *nvm)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 i, s, p, np, v;
+	int rval, rval2;
+
+	np = sensor->nvm_size / SMIAPP_NVM_PAGE_SIZE;
+	for (p = 0; p < np; p++) {
+		rval = smiapp_write(
+			client,
+			SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT, p);
+		if (rval)
+			goto out;
+
+		rval = smiapp_write(client,
+				    SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL,
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN |
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN);
+		if (rval)
+			goto out;
+
+		for (i = 0; i < 1000; i++) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s);
+
+			if (rval)
+				goto out;
+
+			if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY)
+				break;
+
+			if (--i == 0) {
+				rval = -ETIMEDOUT;
+				goto out;
+			}
+
+		}
+
+		for (i = 0; i < SMIAPP_NVM_PAGE_SIZE; i++) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 + i,
+				&v);
+			if (rval)
+				goto out;
+
+			*nvm++ = v;
+		}
+	}
+
+out:
+	rval2 = smiapp_write(client, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, 0);
+	if (rval < 0)
+		return rval;
+	else
+		return rval2;
+}
+
+/*
+ *
+ * SMIA++ CCI address control
+ *
+ */
+static int smiapp_change_cci_addr(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+	u32 val;
+
+	client->addr = sensor->platform_data->i2c_addr_dfl;
+
+	rval = smiapp_write(client,
+			    SMIAPP_REG_U8_CCI_ADDRESS_CONTROL,
+			    sensor->platform_data->i2c_addr_alt << 1);
+	if (rval)
+		return rval;
+
+	client->addr = sensor->platform_data->i2c_addr_alt;
+
+	/* verify addr change went ok */
+	rval = smiapp_read(client, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, &val);
+	if (rval)
+		return rval;
+
+	if (val != sensor->platform_data->i2c_addr_alt << 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ *
+ * SMIA++ Mode Control
+ *
+ */
+static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_flash_strobe_parms *strobe_setup;
+	unsigned int ext_freq = sensor->platform_data->ext_clk;
+	u32 tmp;
+	u32 strobe_adjustment;
+	u32 strobe_width_high_rs;
+	int rval;
+
+	strobe_setup = sensor->platform_data->strobe_setup;
+
+	/*
+	 * How to calculate registers related to strobe length. Please
+	 * do not change, or if you do at least know what you're
+	 * doing. :-)
+	 *
+	 * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> 2010-10-25
+	 *
+	 * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl
+	 *	/ EXTCLK freq [Hz]) * flash_strobe_adjustment
+	 *
+	 * tFlash_strobe_width_ctrl E N, [1 - 0xffff]
+	 * flash_strobe_adjustment E N, [1 - 0xff]
+	 *
+	 * The formula above is written as below to keep it on one
+	 * line:
+	 *
+	 * l / 10^6 = w / e * a
+	 *
+	 * Let's mark w * a by x:
+	 *
+	 * x = w * a
+	 *
+	 * Thus, we get:
+	 *
+	 * x = l * e / 10^6
+	 *
+	 * The strobe width must be at least as long as requested,
+	 * thus rounding upwards is needed.
+	 *
+	 * x = (l * e + 10^6 - 1) / 10^6
+	 * -----------------------------
+	 *
+	 * Maximum possible accuracy is wanted at all times. Thus keep
+	 * a as small as possible.
+	 *
+	 * Calculate a, assuming maximum w, with rounding upwards:
+	 *
+	 * a = (x + (2^16 - 1) - 1) / (2^16 - 1)
+	 * -------------------------------------
+	 *
+	 * Thus, we also get w, with that a, with rounding upwards:
+	 *
+	 * w = (x + a - 1) / a
+	 * -------------------
+	 *
+	 * To get limits:
+	 *
+	 * x E [1, (2^16 - 1) * (2^8 - 1)]
+	 *
+	 * Substituting maximum x to the original formula (with rounding),
+	 * the maximum l is thus
+	 *
+	 * (2^16 - 1) * (2^8 - 1) * 10^6 = l * e + 10^6 - 1
+	 *
+	 * l = (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / e
+	 * --------------------------------------------------
+	 *
+	 * flash_strobe_length must be clamped between 1 and
+	 * (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / EXTCLK freq.
+	 *
+	 * Then,
+	 *
+	 * flash_strobe_adjustment = ((flash_strobe_length *
+	 *	EXTCLK freq + 10^6 - 1) / 10^6 + (2^16 - 1) - 1) / (2^16 - 1)
+	 *
+	 * tFlash_strobe_width_ctrl = ((flash_strobe_length *
+	 *	EXTCLK freq + 10^6 - 1) / 10^6 +
+	 *	flash_strobe_adjustment - 1) / flash_strobe_adjustment
+	 */
+	tmp = div_u64(1000000ULL * ((1 << 16) - 1) * ((1 << 8) - 1) -
+		      1000000 + 1, ext_freq);
+	strobe_setup->strobe_width_high_us =
+		clamp_t(u32, strobe_setup->strobe_width_high_us, 1, tmp);
+
+	tmp = div_u64(((u64)strobe_setup->strobe_width_high_us * (u64)ext_freq +
+			1000000 - 1), 1000000ULL);
+	strobe_adjustment = (tmp + (1 << 16) - 1 - 1) / ((1 << 16) - 1);
+	strobe_width_high_rs = (tmp + strobe_adjustment - 1) /
+				strobe_adjustment;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_MODE_RS,
+			    strobe_setup->mode);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT,
+			    strobe_adjustment);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL,
+		strobe_width_high_rs);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL,
+			    strobe_setup->strobe_delay);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_FLASH_STROBE_START_POINT,
+			    strobe_setup->stobe_start_point);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_TRIGGER_RS,
+			    strobe_setup->trigger);
+
+out:
+	sensor->platform_data->strobe_setup->trigger = 0;
+
+	return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * Power management
+ */
+
+static int smiapp_power_on(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int sleep;
+	int rval;
+
+	rval = regulator_enable(sensor->vana);
+	if (rval) {
+		dev_err(&client->dev, "failed to enable vana regulator\n");
+		return rval;
+	}
+	usleep_range(1000, 1000);
+
+	rval = sensor->platform_data->set_xclk(&sensor->src->sd,
+					sensor->platform_data->ext_clk);
+	if (rval < 0) {
+		dev_dbg(&client->dev, "failed to set xclk\n");
+		goto out_xclk_fail;
+	}
+	usleep_range(1000, 1000);
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 1);
+
+	sleep = SMIAPP_RESET_DELAY(sensor->platform_data->ext_clk);
+	usleep_range(sleep, sleep);
+
+	/*
+	 * Failures to respond to the address change command have been noticed.
+	 * Those failures seem to be caused by the sensor requiring a longer
+	 * boot time than advertised. An additional 10ms delay seems to work
+	 * around the issue, but the SMIA++ I2C write retry hack makes the delay
+	 * unnecessary. The failures need to be investigated to find a proper
+	 * fix, and a delay will likely need to be added here if the I2C write
+	 * retry hack is reverted before the root cause of the boot time issue
+	 * is found.
+	 */
+
+	if (sensor->platform_data->i2c_addr_alt) {
+		rval = smiapp_change_cci_addr(sensor);
+		if (rval) {
+			dev_err(&client->dev, "cci address change error\n");
+			goto out_cci_addr_fail;
+		}
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_SOFTWARE_RESET,
+			    SMIAPP_SOFTWARE_RESET);
+	if (rval < 0) {
+		dev_err(&client->dev, "software reset failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	if (sensor->platform_data->i2c_addr_alt) {
+		rval = smiapp_change_cci_addr(sensor);
+		if (rval) {
+			dev_err(&client->dev, "cci address change error\n");
+			goto out_cci_addr_fail;
+		}
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_COMPRESSION_MODE,
+			    SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR);
+	if (rval) {
+		dev_err(&client->dev, "compression mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ,
+		sensor->platform_data->ext_clk / (1000000 / (1 << 8)));
+	if (rval) {
+		dev_err(&client->dev, "extclk frequency set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_CSI_LANE_MODE,
+			    sensor->platform_data->lanes - 1);
+	if (rval) {
+		dev_err(&client->dev, "csi lane mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FAST_STANDBY_CTRL,
+			    SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE);
+	if (rval) {
+		dev_err(&client->dev, "fast standby set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_CSI_SIGNALLING_MODE,
+			    sensor->platform_data->csi_signalling_mode);
+	if (rval) {
+		dev_err(&client->dev, "csi signalling mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	/* DPHY control done by sensor based on requested link rate */
+	rval = smiapp_write(client, SMIAPP_REG_U8_DPHY_CTRL,
+			    SMIAPP_DPHY_CTRL_UI);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_call_quirk(sensor, post_poweron);
+	if (rval) {
+		dev_err(&client->dev, "post_poweron quirks failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	/* Are we still initialising...? If yes, return here. */
+	if (!sensor->pixel_array)
+		return 0;
+
+	rval = v4l2_ctrl_handler_setup(
+		&sensor->pixel_array->ctrl_handler);
+	if (rval)
+		goto out_cci_addr_fail;
+
+	rval = v4l2_ctrl_handler_setup(&sensor->src->ctrl_handler);
+	if (rval)
+		goto out_cci_addr_fail;
+
+	mutex_lock(&sensor->mutex);
+	rval = smiapp_update_mode(sensor);
+	mutex_unlock(&sensor->mutex);
+	if (rval < 0)
+		goto out_cci_addr_fail;
+
+	return 0;
+
+out_cci_addr_fail:
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 0);
+	sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+
+out_xclk_fail:
+	regulator_disable(sensor->vana);
+	return rval;
+}
+
+static void smiapp_power_off(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	/*
+	 * Currently power/clock to lens are enable/disabled separately
+	 * but they are essentially the same signals. So if the sensor is
+	 * powered off while the lens is powered on the sensor does not
+	 * really see a power off and next time the cci address change
+	 * will fail. So do a soft reset explicitly here.
+	 */
+	if (sensor->platform_data->i2c_addr_alt)
+		smiapp_write(client,
+			     SMIAPP_REG_U8_SOFTWARE_RESET,
+			     SMIAPP_SOFTWARE_RESET);
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 0);
+	sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+	usleep_range(5000, 5000);
+	regulator_disable(sensor->vana);
+	sensor->streaming = 0;
+}
+
+static int smiapp_set_power(struct v4l2_subdev *subdev, int on)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ret = 0;
+
+	mutex_lock(&sensor->power_mutex);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0
+	 * to 0, update the power state.
+	 */
+	if (!sensor->power_count == !on)
+		goto out;
+
+	if (on) {
+		/* Power on and perform initialisation. */
+		ret = smiapp_power_on(sensor);
+		if (ret < 0)
+			goto out;
+	} else {
+		smiapp_power_off(sensor);
+	}
+
+	/* Update the power count. */
+	sensor->power_count += on ? 1 : -1;
+	WARN_ON(sensor->power_count < 0);
+
+out:
+	mutex_unlock(&sensor->power_mutex);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Video stream management
+ */
+
+static int smiapp_start_streaming(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_CSI_DATA_FORMAT,
+			    (sensor->csi_format->width << 8) |
+			    sensor->csi_format->compressed);
+	if (rval)
+		goto out;
+
+	rval = smiapp_pll_configure(sensor);
+	if (rval)
+		goto out;
+
+	/* Analog crop start coordinates */
+	rval = smiapp_write(client, SMIAPP_REG_U16_X_ADDR_START,
+			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_Y_ADDR_START,
+			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top);
+	if (rval < 0)
+		goto out;
+
+	/* Analog crop end coordinates */
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_X_ADDR_END,
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left
+		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width - 1);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_Y_ADDR_END,
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top
+		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height - 1);
+	if (rval < 0)
+		goto out;
+
+	/*
+	 * Output from pixel array, including blanking, is set using
+	 * controls below. No need to set here.
+	 */
+
+	/* Digital crop */
+	if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+	    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].left);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].top);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].width);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].height);
+		if (rval < 0)
+			goto out;
+	}
+
+	/* Scaling */
+	if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+	    != SMIAPP_SCALING_CAPABILITY_NONE) {
+		rval = smiapp_write(client, SMIAPP_REG_U16_SCALING_MODE,
+				    sensor->scaling_mode);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(client, SMIAPP_REG_U16_SCALE_M,
+				    sensor->scale_m);
+		if (rval < 0)
+			goto out;
+	}
+
+	/* Output size from sensor */
+	rval = smiapp_write(client, SMIAPP_REG_U16_X_OUTPUT_SIZE,
+			    sensor->src->crop[SMIAPP_PAD_SRC].width);
+	if (rval < 0)
+		goto out;
+	rval = smiapp_write(client, SMIAPP_REG_U16_Y_OUTPUT_SIZE,
+			    sensor->src->crop[SMIAPP_PAD_SRC].height);
+	if (rval < 0)
+		goto out;
+
+	if ((sensor->flash_capability &
+	     (SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE |
+	      SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) &&
+	    sensor->platform_data->strobe_setup != NULL &&
+	    sensor->platform_data->strobe_setup->trigger != 0) {
+		rval = smiapp_setup_flash_strobe(sensor);
+		if (rval)
+			goto out;
+	}
+
+	rval = smiapp_call_quirk(sensor, pre_streamon);
+	if (rval) {
+		dev_err(&client->dev, "pre_streamon quirks failed\n");
+		goto out;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_MODE_SELECT,
+			    SMIAPP_MODE_SELECT_STREAMING);
+
+out:
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static int smiapp_stop_streaming(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = smiapp_write(client, SMIAPP_REG_U8_MODE_SELECT,
+			    SMIAPP_MODE_SELECT_SOFTWARE_STANDBY);
+	if (rval)
+		goto out;
+
+	rval = smiapp_call_quirk(sensor, post_streamoff);
+	if (rval)
+		dev_err(&client->dev, "post_streamoff quirks failed\n");
+
+out:
+	mutex_unlock(&sensor->mutex);
+	return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev video operations
+ */
+
+static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	if (sensor->streaming == enable)
+		return 0;
+
+	if (enable) {
+		sensor->streaming = 1;
+		rval = smiapp_start_streaming(sensor);
+		if (rval < 0)
+			sensor->streaming = 0;
+	} else {
+		rval = smiapp_stop_streaming(sensor);
+		sensor->streaming = 0;
+	}
+
+	return rval;
+}
+
+static int smiapp_enum_mbus_code(struct v4l2_subdev *subdev,
+				 struct v4l2_subdev_fh *fh,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int i;
+	int idx = -1;
+	int rval = -EINVAL;
+
+	mutex_lock(&sensor->mutex);
+
+	dev_err(&client->dev, "subdev %s, pad %d, index %d\n",
+		subdev->name, code->pad, code->index);
+
+	if (subdev != &sensor->src->sd || code->pad != SMIAPP_PAD_SRC) {
+		if (code->index)
+			goto out;
+
+		code->code = sensor->internal_csi_format->code;
+		rval = 0;
+		goto out;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+		if (sensor->mbus_frame_fmts & (1 << i))
+			idx++;
+
+		if (idx == code->index) {
+			code->code = smiapp_csi_data_formats[i].code;
+			dev_err(&client->dev, "found index %d, i %d, code %x\n",
+				code->index, i, code->code);
+			rval = 0;
+			break;
+		}
+	}
+
+out:
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static u32 __smiapp_get_mbus_code(struct v4l2_subdev *subdev,
+				  unsigned int pad)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	if (subdev == &sensor->src->sd && pad == SMIAPP_PAD_SRC)
+		return sensor->csi_format->code;
+	else
+		return sensor->internal_csi_format->code;
+}
+
+static int __smiapp_get_format(struct v4l2_subdev *subdev,
+			       struct v4l2_subdev_fh *fh,
+			       struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad);
+	} else {
+		struct v4l2_rect *r;
+
+		if (fmt->pad == ssd->source_pad)
+			r = &ssd->crop[ssd->source_pad];
+		else
+			r = &ssd->sink_fmt;
+
+		fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
+		fmt->format.width = r->width;
+		fmt->format.height = r->height;
+	}
+
+	return 0;
+}
+
+static int smiapp_get_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = __smiapp_get_format(subdev, fh, fmt);
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static void smiapp_get_crop_compose(struct v4l2_subdev *subdev,
+				    struct v4l2_subdev_fh *fh,
+				    struct v4l2_rect **crops,
+				    struct v4l2_rect **comps, int which)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	unsigned int i;
+
+	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		if (crops)
+			for (i = 0; i < subdev->entity.num_pads; i++)
+				crops[i] = &ssd->crop[i];
+		if (comps)
+			*comps = &ssd->compose;
+	} else {
+		if (crops) {
+			for (i = 0; i < subdev->entity.num_pads; i++) {
+				crops[i] = v4l2_subdev_get_try_crop(fh, i);
+				BUG_ON(!crops[i]);
+			}
+		}
+		if (comps) {
+			*comps = v4l2_subdev_get_try_compose(fh,
+							     SMIAPP_PAD_SINK);
+			BUG_ON(!*comps);
+		}
+	}
+}
+
+/* Changes require propagation only on sink pad. */
+static void smiapp_propagate(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh, int which,
+			     int target)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, which);
+
+	switch (target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+		comp->width = crops[SMIAPP_PAD_SINK]->width;
+		comp->height = crops[SMIAPP_PAD_SINK]->height;
+		if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+			if (ssd == sensor->scaler) {
+				sensor->scale_m =
+					sensor->limits[
+						SMIAPP_LIMIT_SCALER_N_MIN];
+				sensor->scaling_mode =
+					SMIAPP_SCALING_MODE_NONE;
+			} else if (ssd == sensor->binner) {
+				sensor->binning_horizontal = 1;
+				sensor->binning_vertical = 1;
+			}
+		}
+		/* Fall through */
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		*crops[SMIAPP_PAD_SRC] = *comp;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static const struct smiapp_csi_data_format
+*smiapp_validate_csi_data_format(struct smiapp_sensor *sensor, u32 code)
+{
+	const struct smiapp_csi_data_format *csi_format = sensor->csi_format;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+		if (sensor->mbus_frame_fmts & (1 << i)
+		    && smiapp_csi_data_formats[i].code == code)
+			return &smiapp_csi_data_formats[i];
+	}
+
+	return csi_format;
+}
+
+static int smiapp_set_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *crops[SMIAPP_PADS];
+	const struct smiapp_csi_data_format *csi_format;
+
+	mutex_lock(&sensor->mutex);
+
+	/*
+	 * Media bus code is changeable on src subdev's source pad. On
+	 * other source pads we just get format here.
+	 */
+	if (fmt->pad == ssd->source_pad) {
+		int rval = __smiapp_get_format(subdev, fh, fmt);
+		if (!rval && subdev == &sensor->src->sd) {
+			csi_format = smiapp_validate_csi_data_format(
+				sensor, fmt->format.code);
+			if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+				sensor->csi_format = csi_format;
+			fmt->format.code = csi_format->code;
+		}
+
+		mutex_unlock(&sensor->mutex);
+		return rval;
+	}
+
+	/* Sink pad. Width and height are changeable here. */
+	fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
+	fmt->format.width &= ~1;
+	fmt->format.height &= ~1;
+
+	fmt->format.width =
+		clamp(fmt->format.width,
+		      sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
+		      sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
+	fmt->format.height =
+		clamp(fmt->format.height,
+		      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
+		      sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
+
+	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
+
+	crops[ssd->sink_pad]->left = 0;
+	crops[ssd->sink_pad]->top = 0;
+	crops[ssd->sink_pad]->width = fmt->format.width;
+	crops[ssd->sink_pad]->height = fmt->format.height;
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		ssd->sink_fmt = *crops[ssd->sink_pad];
+	smiapp_propagate(subdev, fh, fmt->which,
+			 V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
+
+	mutex_unlock(&sensor->mutex);
+
+	return 0;
+}
+
+/*
+ * Calculate goodness of scaled image size compared to expected image
+ * size and flags provided.
+ */
+#define SCALING_GOODNESS		100000
+#define SCALING_GOODNESS_EXTREME	100000000
+static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w,
+			    int h, int ask_h, u32 flags)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	int val = 0;
+
+	w &= ~1;
+	ask_w &= ~1;
+	h &= ~1;
+	ask_h &= ~1;
+
+	if (flags & V4L2_SUBDEV_SEL_FLAG_SIZE_GE) {
+		if (w < ask_w)
+			val -= SCALING_GOODNESS;
+		if (h < ask_h)
+			val -= SCALING_GOODNESS;
+	}
+
+	if (flags & V4L2_SUBDEV_SEL_FLAG_SIZE_LE) {
+		if (w > ask_w)
+			val -= SCALING_GOODNESS;
+		if (h > ask_h)
+			val -= SCALING_GOODNESS;
+	}
+
+	val -= abs(w - ask_w);
+	val -= abs(h - ask_h);
+
+	if (w < sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE])
+		val -= SCALING_GOODNESS_EXTREME;
+
+	dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n",
+		w, ask_h, h, ask_h, val);
+
+	return val;
+}
+
+static void smiapp_set_compose_binner(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_fh *fh,
+				      struct v4l2_subdev_selection *sel,
+				      struct v4l2_rect **crops,
+				      struct v4l2_rect *comp)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int i;
+	unsigned int binh = 1, binv = 1;
+	unsigned int best = scaling_goodness(
+		subdev,
+		crops[SMIAPP_PAD_SINK]->width, sel->r.width,
+		crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags);
+
+	for (i = 0; i < sensor->nbinning_subtypes; i++) {
+		int this = scaling_goodness(
+			subdev,
+			crops[SMIAPP_PAD_SINK]->width
+			/ sensor->binning_subtypes[i].horizontal,
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height
+			/ sensor->binning_subtypes[i].vertical,
+			sel->r.height, sel->flags);
+
+		if (this > best) {
+			binh = sensor->binning_subtypes[i].horizontal;
+			binv = sensor->binning_subtypes[i].vertical;
+			best = this;
+		}
+	}
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sensor->binning_vertical = binv;
+		sensor->binning_horizontal = binh;
+	}
+
+	sel->r.width = (crops[SMIAPP_PAD_SINK]->width / binh) & ~1;
+	sel->r.height = (crops[SMIAPP_PAD_SINK]->height / binv) & ~1;
+}
+
+/*
+ * Calculate best scaling ratio and mode for given output resolution.
+ *
+ * Try all of these: horizontal ratio, vertical ratio and smallest
+ * size possible (horizontally).
+ *
+ * Also try whether horizontal scaler or full scaler gives a better
+ * result.
+ */
+static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_fh *fh,
+				      struct v4l2_subdev_selection *sel,
+				      struct v4l2_rect **crops,
+				      struct v4l2_rect *comp)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	u32 min, max, a, b, max_m;
+	u32 scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+	int mode = SMIAPP_SCALING_MODE_HORIZONTAL;
+	u32 try[4];
+	u32 ntry = 0;
+	unsigned int i;
+	int best = INT_MIN;
+
+	sel->r.width = min_t(unsigned int, sel->r.width,
+			     crops[SMIAPP_PAD_SINK]->width);
+	sel->r.height = min_t(unsigned int, sel->r.height,
+			      crops[SMIAPP_PAD_SINK]->height);
+
+	a = crops[SMIAPP_PAD_SINK]->width
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.width;
+	b = crops[SMIAPP_PAD_SINK]->height
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.height;
+	max_m = crops[SMIAPP_PAD_SINK]->width
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]
+		/ sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE];
+
+	a = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		max(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	b = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		max(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	max_m = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		    max(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+
+	dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m);
+
+	min = min(max_m, min(a, b));
+	max = min(max_m, max(a, b));
+
+	try[ntry] = min;
+	ntry++;
+	if (min != max) {
+		try[ntry] = max;
+		ntry++;
+	}
+	if (max != max_m) {
+		try[ntry] = min + 1;
+		ntry++;
+		if (min != max) {
+			try[ntry] = max + 1;
+			ntry++;
+		}
+	}
+
+	for (i = 0; i < ntry; i++) {
+		int this = scaling_goodness(
+			subdev,
+			crops[SMIAPP_PAD_SINK]->width
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height,
+			sel->r.height,
+			sel->flags);
+
+		dev_dbg(&client->dev, "trying factor %d (%d)\n", try[i], i);
+
+		if (this > best) {
+			scale_m = try[i];
+			mode = SMIAPP_SCALING_MODE_HORIZONTAL;
+			best = this;
+		}
+
+		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
+			continue;
+
+		this = scaling_goodness(
+			subdev, crops[SMIAPP_PAD_SINK]->width
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.height,
+			sel->flags);
+
+		if (this > best) {
+			scale_m = try[i];
+			mode = SMIAPP_SCALING_MODE_BOTH;
+			best = this;
+		}
+	}
+
+	sel->r.width =
+		(crops[SMIAPP_PAD_SINK]->width
+		 / scale_m
+		 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) & ~1;
+	if (mode == SMIAPP_SCALING_MODE_BOTH)
+		sel->r.height =
+			(crops[SMIAPP_PAD_SINK]->height
+			 / scale_m
+			 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN])
+			& ~1;
+	else
+		sel->r.height = crops[SMIAPP_PAD_SINK]->height;
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sensor->scale_m = scale_m;
+		sensor->scaling_mode = mode;
+	}
+}
+/* We're only called on source pads. This function sets scaling. */
+static int smiapp_set_compose(struct v4l2_subdev *subdev,
+			      struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
+
+	sel->r.top = 0;
+	sel->r.left = 0;
+
+	if (ssd == sensor->binner)
+		smiapp_set_compose_binner(subdev, fh, sel, crops, comp);
+	else
+		smiapp_set_compose_scaler(subdev, fh, sel, crops, comp);
+
+	*comp = sel->r;
+	smiapp_propagate(subdev, fh, sel->which,
+			 V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		return smiapp_update_mode(sensor);
+
+	return 0;
+}
+
+static int __smiapp_sel_supported(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+
+	/* We only implement crop in three places. */
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS:
+		if (ssd == sensor->pixel_array
+		    && sel->pad == SMIAPP_PA_PAD_SRC)
+			return 0;
+		if (ssd == sensor->src
+		    && sel->pad == SMIAPP_PAD_SRC)
+			return 0;
+		if (ssd == sensor->scaler
+		    && sel->pad == SMIAPP_PAD_SINK
+		    && sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+		    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP)
+			return 0;
+		return -EINVAL;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
+		if (sel->pad == ssd->source_pad)
+			return -EINVAL;
+		if (ssd == sensor->binner)
+			return 0;
+		if (ssd == sensor->scaler
+		    && sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    != SMIAPP_SCALING_CAPABILITY_NONE)
+			return 0;
+		/* Fall through */
+	default:
+		return -EINVAL;
+	}
+}
+
+static int smiapp_set_crop(struct v4l2_subdev *subdev,
+			   struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *src_size, *crops[SMIAPP_PADS];
+	struct v4l2_rect _r;
+
+	smiapp_get_crop_compose(subdev, fh, crops, NULL, sel->which);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		if (sel->pad == ssd->sink_pad)
+			src_size = &ssd->sink_fmt;
+		else
+			src_size = &ssd->compose;
+	} else {
+		if (sel->pad == ssd->sink_pad) {
+			_r.left = 0;
+			_r.top = 0;
+			_r.width = v4l2_subdev_get_try_format(fh, sel->pad)
+				->width;
+			_r.height = v4l2_subdev_get_try_format(fh, sel->pad)
+				->height;
+			src_size = &_r;
+		} else {
+			src_size =
+				v4l2_subdev_get_try_compose(
+					fh, ssd->sink_pad);
+		}
+	}
+
+	if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) {
+		sel->r.left = 0;
+		sel->r.top = 0;
+	}
+
+	sel->r.width = min(sel->r.width, src_size->width);
+	sel->r.height = min(sel->r.height, src_size->height);
+
+	sel->r.left = min(sel->r.left, src_size->width - sel->r.width);
+	sel->r.top = min(sel->r.top, src_size->height - sel->r.height);
+
+	*crops[sel->pad] = sel->r;
+
+	if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK)
+		smiapp_propagate(subdev, fh, sel->which,
+				 V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
+
+	return 0;
+}
+
+static int __smiapp_get_selection(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+	struct v4l2_rect sink_fmt;
+	int ret;
+
+	ret = __smiapp_sel_supported(subdev, sel);
+	if (ret)
+		return ret;
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sink_fmt = ssd->sink_fmt;
+	} else {
+		struct v4l2_mbus_framefmt *fmt =
+			v4l2_subdev_get_try_format(fh, ssd->sink_pad);
+
+		sink_fmt.left = 0;
+		sink_fmt.top = 0;
+		sink_fmt.width = fmt->width;
+		sink_fmt.height = fmt->height;
+	}
+
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS:
+		if (ssd == sensor->pixel_array) {
+			sel->r.width =
+				sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+			sel->r.height =
+				sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		} else if (sel->pad == ssd->sink_pad) {
+			sel->r = sink_fmt;
+		} else {
+			sel->r = *comp;
+		}
+		break;
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
+		sel->r = *crops[sel->pad];
+		break;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		sel->r = *comp;
+		break;
+	}
+
+	return 0;
+}
+
+static int smiapp_get_selection(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = __smiapp_get_selection(subdev, fh, sel);
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+static int smiapp_set_selection(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ret;
+
+	ret = __smiapp_sel_supported(subdev, sel);
+	if (ret)
+		return ret;
+
+	mutex_lock(&sensor->mutex);
+
+	sel->r.left = max(0, sel->r.left & ~1);
+	sel->r.top = max(0, sel->r.top & ~1);
+	sel->r.width = max(0, SMIAPP_ALIGN_DIM(sel->r.width, sel->flags));
+	sel->r.height = max(0, SMIAPP_ALIGN_DIM(sel->r.height, sel->flags));
+
+	sel->r.width = max_t(unsigned int,
+			     sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
+			     sel->r.width);
+	sel->r.height = max_t(unsigned int,
+			      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
+			      sel->r.height);
+
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+		ret = smiapp_set_crop(subdev, fh, sel);
+		break;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		ret = smiapp_set_compose(subdev, fh, sel);
+		break;
+	default:
+		BUG();
+	}
+
+	mutex_unlock(&sensor->mutex);
+	return ret;
+}
+
+static int smiapp_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	*frames = sensor->frame_skip;
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * sysfs attributes
+ */
+
+static ssize_t
+smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
+		      char *buf)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int nbytes;
+
+	if (!sensor->dev_init_done)
+		return -EBUSY;
+
+	if (!sensor->nvm_size) {
+		/* NVM not read yet - read it now */
+		sensor->nvm_size = sensor->platform_data->nvm_size;
+		if (smiapp_set_power(subdev, 1) < 0)
+			return -ENODEV;
+		if (smiapp_read_nvm(sensor, sensor->nvm)) {
+			dev_err(&client->dev, "nvm read failed\n");
+			return -ENODEV;
+		}
+		smiapp_set_power(subdev, 0);
+	}
+	/*
+	 * NVM is still way below a PAGE_SIZE, so we can safely
+	 * assume this for now.
+	 */
+	nbytes = min_t(unsigned int, sensor->nvm_size, PAGE_SIZE);
+	memcpy(buf, sensor->nvm, nbytes);
+
+	return nbytes;
+}
+static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL);
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev core operations
+ */
+
+static int smiapp_identify_module(struct v4l2_subdev *subdev)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_module_info *minfo = &sensor->minfo;
+	unsigned int i;
+	int rval = 0;
+
+	minfo->name = SMIAPP_NAME;
+
+	/* Module info */
+	rval = smiapp_read(client, SMIAPP_REG_U8_MANUFACTURER_ID,
+			   &minfo->manufacturer_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U16_MODEL_ID,
+				   &minfo->model_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_REVISION_NUMBER_MAJOR,
+				   &minfo->revision_number_major);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_REVISION_NUMBER_MINOR,
+				   &minfo->revision_number_minor);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_YEAR,
+				   &minfo->module_year);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_MONTH,
+				   &minfo->module_month);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_DAY,
+				   &minfo->module_day);
+
+	/* Sensor info */
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID,
+				   &minfo->sensor_manufacturer_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U16_SENSOR_MODEL_ID,
+				   &minfo->sensor_model_id);
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_REVISION_NUMBER,
+				   &minfo->sensor_revision_number);
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION,
+				   &minfo->sensor_firmware_version);
+
+	/* SMIA */
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_SMIA_VERSION,
+				   &minfo->smia_version);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_SMIAPP_VERSION,
+				   &minfo->smiapp_version);
+
+	if (rval) {
+		dev_err(&client->dev, "sensor detection failed\n");
+		return -ENODEV;
+	}
+
+	dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n",
+		minfo->manufacturer_id, minfo->model_id);
+
+	dev_dbg(&client->dev,
+		"module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n",
+		minfo->revision_number_major, minfo->revision_number_minor,
+		minfo->module_year, minfo->module_month, minfo->module_day);
+
+	dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n",
+		minfo->sensor_manufacturer_id, minfo->sensor_model_id);
+
+	dev_dbg(&client->dev,
+		"sensor revision 0x%2.2x firmware version 0x%2.2x\n",
+		minfo->sensor_revision_number, minfo->sensor_firmware_version);
+
+	dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n",
+		minfo->smia_version, minfo->smiapp_version);
+
+	/*
+	 * Some modules have bad data in the lvalues below. Hope the
+	 * rvalues have better stuff. The lvalues are module
+	 * parameters whereas the rvalues are sensor parameters.
+	 */
+	if (!minfo->manufacturer_id && !minfo->model_id) {
+		minfo->manufacturer_id = minfo->sensor_manufacturer_id;
+		minfo->model_id = minfo->sensor_model_id;
+		minfo->revision_number_major = minfo->sensor_revision_number;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) {
+		if (smiapp_module_idents[i].manufacturer_id
+		    != minfo->manufacturer_id)
+			continue;
+		if (smiapp_module_idents[i].model_id != minfo->model_id)
+			continue;
+		if (smiapp_module_idents[i].flags
+		    & SMIAPP_MODULE_IDENT_FLAG_REV_LE) {
+			if (smiapp_module_idents[i].revision_number_major
+			    < minfo->revision_number_major)
+				continue;
+		} else {
+			if (smiapp_module_idents[i].revision_number_major
+			    != minfo->revision_number_major)
+				continue;
+		}
+
+		minfo->name = smiapp_module_idents[i].name;
+		minfo->quirk = smiapp_module_idents[i].quirk;
+		break;
+	}
+
+	if (i >= ARRAY_SIZE(smiapp_module_idents))
+		dev_warn(&client->dev,
+			 "no quirks for this module; let's hope it's fully compliant\n");
+
+	dev_dbg(&client->dev, "the sensor is called %s, ident %2.2x%4.4x%2.2x\n",
+		minfo->name, minfo->manufacturer_id, minfo->model_id,
+		minfo->revision_number_major);
+
+	strlcpy(subdev->name, sensor->minfo.name, sizeof(subdev->name));
+
+	return 0;
+}
+
+static const struct v4l2_subdev_ops smiapp_ops;
+static const struct v4l2_subdev_internal_ops smiapp_internal_ops;
+static const struct media_entity_operations smiapp_entity_ops;
+
+static int smiapp_registered(struct v4l2_subdev *subdev)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_subdev *last = NULL;
+	u32 tmp;
+	unsigned int i;
+	int rval;
+
+	sensor->vana = regulator_get(&client->dev, "VANA");
+	if (IS_ERR(sensor->vana)) {
+		dev_err(&client->dev, "could not get regulator for vana\n");
+		return -ENODEV;
+	}
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) {
+		if (gpio_request_one(sensor->platform_data->xshutdown, 0,
+				     "SMIA++ xshutdown") != 0) {
+			dev_err(&client->dev,
+				"unable to acquire reset gpio %d\n",
+				sensor->platform_data->xshutdown);
+			rval = -ENODEV;
+			goto out_gpio_request;
+		}
+	}
+
+	rval = smiapp_power_on(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_smiapp_power_on;
+	}
+
+	rval = smiapp_identify_module(subdev);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	rval = smiapp_get_all_limits(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	/*
+	 * Handle Sensor Module orientation on the board.
+	 *
+	 * The application of H-FLIP and V-FLIP on the sensor is modified by
+	 * the sensor orientation on the board.
+	 *
+	 * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set
+	 * both H-FLIP and V-FLIP for normal operation which also implies
+	 * that a set/unset operation for user space HFLIP and VFLIP v4l2
+	 * controls will need to be internally inverted.
+	 *
+	 * Rotation also changes the bayer pattern.
+	 */
+	if (sensor->platform_data->module_board_orient ==
+	    SMIAPP_MODULE_BOARD_ORIENT_180)
+		sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP |
+					  SMIAPP_IMAGE_ORIENTATION_VFLIP;
+
+	rval = smiapp_get_mbus_formats(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) {
+		u32 val;
+
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_BINNING_SUBTYPES, &val);
+		if (rval < 0) {
+			rval = -ENODEV;
+			goto out_power_off;
+		}
+		sensor->nbinning_subtypes = min_t(u8, val,
+						  SMIAPP_BINNING_SUBTYPES);
+
+		for (i = 0; i < sensor->nbinning_subtypes; i++) {
+			rval = smiapp_read(
+				client, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val);
+			if (rval < 0) {
+				rval = -ENODEV;
+				goto out_power_off;
+			}
+			sensor->binning_subtypes[i] =
+				*(struct smiapp_binning_subtype *)&val;
+
+			dev_dbg(&client->dev, "binning %xx%x\n",
+				sensor->binning_subtypes[i].horizontal,
+				sensor->binning_subtypes[i].vertical);
+		}
+	}
+	sensor->binning_horizontal = 1;
+	sensor->binning_vertical = 1;
+
+	/* SMIA++ NVM initialization - it will be read from the sensor
+	 * when it is first requested by userspace.
+	 */
+	if (sensor->minfo.smiapp_version && sensor->platform_data->nvm_size) {
+		sensor->nvm = kzalloc(sensor->platform_data->nvm_size,
+				      GFP_KERNEL);
+		if (sensor->nvm == NULL) {
+			dev_err(&client->dev, "nvm buf allocation failed\n");
+			rval = -ENOMEM;
+			goto out_power_off;
+		}
+
+		if (device_create_file(&client->dev, &dev_attr_nvm) != 0) {
+			dev_err(&client->dev, "sysfs nvm entry failed\n");
+			rval = -EBUSY;
+			goto out_power_off;
+		}
+	}
+
+	rval = smiapp_call_quirk(sensor, limits);
+	if (rval) {
+		dev_err(&client->dev, "limits quirks failed\n");
+		goto out_nvm_release;
+	}
+
+	/* We consider this as profile 0 sensor if any of these are zero. */
+	if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) {
+		sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0;
+	} else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		   != SMIAPP_SCALING_CAPABILITY_NONE) {
+		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
+			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1;
+		else
+			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2;
+		sensor->scaler = &sensor->ssds[sensor->ssds_used];
+		sensor->ssds_used++;
+	} else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+		   == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
+		sensor->scaler = &sensor->ssds[sensor->ssds_used];
+		sensor->ssds_used++;
+	}
+	sensor->binner = &sensor->ssds[sensor->ssds_used];
+	sensor->ssds_used++;
+	sensor->pixel_array = &sensor->ssds[sensor->ssds_used];
+	sensor->ssds_used++;
+
+	sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+
+	for (i = 0; i < SMIAPP_SUBDEVS; i++) {
+		struct {
+			struct smiapp_subdev *ssd;
+			char *name;
+		} const __this[] = {
+			{ sensor->scaler, "scaler", },
+			{ sensor->binner, "binner", },
+			{ sensor->pixel_array, "pixel array", },
+		}, *_this = &__this[i];
+		struct smiapp_subdev *this = _this->ssd;
+
+		if (!this)
+			continue;
+
+		if (this != sensor->src)
+			v4l2_subdev_init(&this->sd, &smiapp_ops);
+
+		this->sensor = sensor;
+
+		if (this == sensor->pixel_array) {
+			this->npads = 1;
+		} else {
+			this->npads = 2;
+			this->source_pad = 1;
+		}
+
+		snprintf(this->sd.name,
+			 sizeof(this->sd.name), "%s %s",
+			 sensor->minfo.name, _this->name);
+
+		this->sink_fmt.width =
+			sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+		this->sink_fmt.height =
+			sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		this->compose.width = this->sink_fmt.width;
+		this->compose.height = this->sink_fmt.height;
+		this->crop[this->source_pad] = this->compose;
+		this->pads[this->source_pad].flags = MEDIA_PAD_FL_SOURCE;
+		if (this != sensor->pixel_array) {
+			this->crop[this->sink_pad] = this->compose;
+			this->pads[this->sink_pad].flags = MEDIA_PAD_FL_SINK;
+		}
+
+		this->sd.entity.ops = &smiapp_entity_ops;
+
+		if (last == NULL) {
+			last = this;
+			continue;
+		}
+
+		this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+		this->sd.internal_ops = &smiapp_internal_ops;
+		this->sd.owner = NULL;
+		v4l2_set_subdevdata(&this->sd, client);
+
+		rval = media_entity_init(&this->sd.entity,
+					 this->npads, this->pads, 0);
+		if (rval) {
+			dev_err(&client->dev,
+				"media_entity_init failed\n");
+			goto out_nvm_release;
+		}
+
+		rval = media_entity_create_link(&this->sd.entity,
+						this->source_pad,
+						&last->sd.entity,
+						last->sink_pad,
+						MEDIA_LNK_FL_ENABLED |
+						MEDIA_LNK_FL_IMMUTABLE);
+		if (rval) {
+			dev_err(&client->dev,
+				"media_entity_create_link failed\n");
+			goto out_nvm_release;
+		}
+
+		rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev,
+						   &this->sd);
+		if (rval) {
+			dev_err(&client->dev,
+				"v4l2_device_register_subdev failed\n");
+			goto out_nvm_release;
+		}
+
+		last = this;
+	}
+
+	dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile);
+
+	sensor->pixel_array->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+
+	/* final steps */
+	smiapp_read_frame_fmt(sensor);
+	rval = smiapp_init_controls(sensor);
+	if (rval < 0)
+		goto out_nvm_release;
+
+	rval = smiapp_update_mode(sensor);
+	if (rval) {
+		dev_err(&client->dev, "update mode failed\n");
+		goto out_nvm_release;
+	}
+
+	sensor->streaming = false;
+	sensor->dev_init_done = true;
+
+	/* check flash capability */
+	rval = smiapp_read(client, SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, &tmp);
+	sensor->flash_capability = tmp;
+	if (rval)
+		goto out_nvm_release;
+
+	smiapp_power_off(sensor);
+
+	return 0;
+
+out_nvm_release:
+	device_remove_file(&client->dev, &dev_attr_nvm);
+
+out_power_off:
+	kfree(sensor->nvm);
+	sensor->nvm = NULL;
+	smiapp_power_off(sensor);
+
+out_smiapp_power_on:
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_free(sensor->platform_data->xshutdown);
+
+out_gpio_request:
+	regulator_put(sensor->vana);
+	sensor->vana = NULL;
+	return rval;
+}
+
+static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(sd);
+	struct smiapp_sensor *sensor = ssd->sensor;
+	u32 mbus_code =
+		smiapp_csi_data_formats[smiapp_pixel_order(sensor)].code;
+	unsigned int i;
+
+	mutex_lock(&sensor->mutex);
+
+	for (i = 0; i < ssd->npads; i++) {
+		struct v4l2_mbus_framefmt *try_fmt =
+			v4l2_subdev_get_try_format(fh, i);
+		struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(fh, i);
+		struct v4l2_rect *try_comp;
+
+		try_fmt->width = sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+		try_fmt->height = sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		try_fmt->code = mbus_code;
+
+		try_crop->top = 0;
+		try_crop->left = 0;
+		try_crop->width = try_fmt->width;
+		try_crop->height = try_fmt->height;
+
+		if (ssd != sensor->pixel_array)
+			continue;
+
+		try_comp = v4l2_subdev_get_try_compose(fh, i);
+		*try_comp = *try_crop;
+	}
+
+	mutex_unlock(&sensor->mutex);
+
+	return smiapp_set_power(sd, 1);
+}
+
+static int smiapp_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	return smiapp_set_power(sd, 0);
+}
+
+static const struct v4l2_subdev_video_ops smiapp_video_ops = {
+	.s_stream = smiapp_set_stream,
+};
+
+static const struct v4l2_subdev_core_ops smiapp_core_ops = {
+	.s_power = smiapp_set_power,
+};
+
+static const struct v4l2_subdev_pad_ops smiapp_pad_ops = {
+	.enum_mbus_code = smiapp_enum_mbus_code,
+	.get_fmt = smiapp_get_format,
+	.set_fmt = smiapp_set_format,
+	.get_selection = smiapp_get_selection,
+	.set_selection = smiapp_set_selection,
+};
+
+static const struct v4l2_subdev_sensor_ops smiapp_sensor_ops = {
+	.g_skip_frames = smiapp_get_skip_frames,
+};
+
+static const struct v4l2_subdev_ops smiapp_ops = {
+	.core = &smiapp_core_ops,
+	.video = &smiapp_video_ops,
+	.pad = &smiapp_pad_ops,
+	.sensor = &smiapp_sensor_ops,
+};
+
+static const struct media_entity_operations smiapp_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = {
+	.registered = smiapp_registered,
+	.open = smiapp_open,
+	.close = smiapp_close,
+};
+
+static const struct v4l2_subdev_internal_ops smiapp_internal_ops = {
+	.open = smiapp_open,
+	.close = smiapp_close,
+};
+
+/* -----------------------------------------------------------------------------
+ * I2C Driver
+ */
+
+#ifdef CONFIG_PM
+
+static int smiapp_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	bool streaming;
+
+	BUG_ON(mutex_is_locked(&sensor->mutex));
+
+	if (sensor->power_count == 0)
+		return 0;
+
+	if (sensor->streaming)
+		smiapp_stop_streaming(sensor);
+
+	streaming = sensor->streaming;
+
+	smiapp_power_off(sensor);
+
+	/* save state for resume */
+	sensor->streaming = streaming;
+
+	return 0;
+}
+
+static int smiapp_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	if (sensor->power_count == 0)
+		return 0;
+
+	rval = smiapp_power_on(sensor);
+	if (rval)
+		return rval;
+
+	if (sensor->streaming)
+		rval = smiapp_start_streaming(sensor);
+
+	return rval;
+}
+
+#else
+
+#define smiapp_suspend	NULL
+#define smiapp_resume	NULL
+
+#endif /* CONFIG_PM */
+
+static int smiapp_probe(struct i2c_client *client,
+			const struct i2c_device_id *devid)
+{
+	struct smiapp_sensor *sensor;
+	int rval;
+
+	if (client->dev.platform_data == NULL)
+		return -ENODEV;
+
+	sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
+	if (sensor == NULL)
+		return -ENOMEM;
+
+	sensor->platform_data = client->dev.platform_data;
+	mutex_init(&sensor->mutex);
+	mutex_init(&sensor->power_mutex);
+	sensor->src = &sensor->ssds[sensor->ssds_used];
+
+	v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops);
+	sensor->src->sd.internal_ops = &smiapp_internal_src_ops;
+	sensor->src->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sensor->src->sensor = sensor;
+
+	sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE;
+	rval = media_entity_init(&sensor->src->sd.entity, 2,
+				 sensor->src->pads, 0);
+	if (rval < 0)
+		kfree(sensor);
+
+	return rval;
+}
+
+static int __exit smiapp_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int i;
+
+	if (sensor->power_count) {
+		if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+			gpio_set_value(sensor->platform_data->xshutdown, 0);
+		sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+		sensor->power_count = 0;
+	}
+
+	if (sensor->nvm) {
+		device_remove_file(&client->dev, &dev_attr_nvm);
+		kfree(sensor->nvm);
+	}
+
+	for (i = 0; i < sensor->ssds_used; i++) {
+		media_entity_cleanup(&sensor->ssds[i].sd.entity);
+		v4l2_device_unregister_subdev(&sensor->ssds[i].sd);
+	}
+	smiapp_free_controls(sensor);
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_free(sensor->platform_data->xshutdown);
+	if (sensor->vana)
+		regulator_put(sensor->vana);
+
+	kfree(sensor);
+
+	return 0;
+}
+
+static const struct i2c_device_id smiapp_id_table[] = {
+	{ SMIAPP_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, smiapp_id_table);
+
+static const struct dev_pm_ops smiapp_pm_ops = {
+	.suspend	= smiapp_suspend,
+	.resume		= smiapp_resume,
+};
+
+static struct i2c_driver smiapp_i2c_driver = {
+	.driver	= {
+		.name = SMIAPP_NAME,
+		.pm = &smiapp_pm_ops,
+	},
+	.probe	= smiapp_probe,
+	.remove	= __exit_p(smiapp_remove),
+	.id_table = smiapp_id_table,
+};
+
+module_i2c_driver(smiapp_i2c_driver);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
+MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp/smiapp-debug.h b/drivers/media/video/smiapp/smiapp-debug.h
new file mode 100644
index 0000000..627809e
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-debug.h
@@ -0,0 +1,32 @@
+/*
+ * drivers/media/video/smiapp/smiapp-debug.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_DEBUG_H
+#define SMIAPP_DEBUG_H
+
+#ifdef CONFIG_VIDEO_SMIAPP_DEBUG
+#define DEBUG
+#endif
+
+#endif
diff --git a/drivers/media/video/smiapp/smiapp-limits.c b/drivers/media/video/smiapp/smiapp-limits.c
new file mode 100644
index 0000000..0800e09
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-limits.c
@@ -0,0 +1,132 @@
+/*
+ * drivers/media/video/smiapp/smiapp-limits.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp.h"
+
+struct smiapp_reg_limits smiapp_reg_limits[] = {
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY, "analogue_gain_capability" }, /* 0 */
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN, "analogue_gain_code_min" },
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX, "analogue_gain_code_max" },
+	{ SMIAPP_REG_U8_THS_ZERO_MIN, "ths_zero_min" },
+	{ SMIAPP_REG_U8_TCLK_TRAIL_MIN, "tclk_trail_min" },
+	{ SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY, "integration_time_capability" }, /* 5 */
+	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN, "coarse_integration_time_min" },
+	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN, "coarse_integration_time_max_margin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN, "fine_integration_time_min" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN, "fine_integration_time_max_margin" },
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY, "digital_gain_capability" }, /* 10 */
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_MIN, "digital_gain_min" },
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_MAX, "digital_gain_max" },
+	{ SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ, "min_ext_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ, "max_ext_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV, "min_pre_pll_clk_div" }, /* 15 */
+	{ SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV, "max_pre_pll_clk_div" },
+	{ SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ, "min_pll_ip_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ, "max_pll_ip_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_PLL_MULTIPLIER, "min_pll_multiplier" },
+	{ SMIAPP_REG_U16_MAX_PLL_MULTIPLIER, "max_pll_multiplier" }, /* 20 */
+	{ SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ, "min_pll_op_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ, "max_pll_op_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV, "min_vt_sys_clk_div" },
+	{ SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV, "max_vt_sys_clk_div" },
+	{ SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ, "min_vt_sys_clk_freq_hz" }, /* 25 */
+	{ SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ, "max_vt_sys_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ, "min_vt_pix_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ, "max_vt_pix_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV, "min_vt_pix_clk_div" },
+	{ SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV, "max_vt_pix_clk_div" }, /* 30 */
+	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES, "min_frame_length_lines" },
+	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES, "max_frame_length_lines" },
+	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK, "min_line_length_pck" },
+	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK, "max_line_length_pck" },
+	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK, "min_line_blanking_pck" }, /* 35 */
+	{ SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES, "min_frame_blanking_lines" },
+	{ SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE, "min_line_length_pck_step_size" },
+	{ SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV, "min_op_sys_clk_div" },
+	{ SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV, "max_op_sys_clk_div" },
+	{ SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ, "min_op_sys_clk_freq_hz" }, /* 40 */
+	{ SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ, "max_op_sys_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV, "min_op_pix_clk_div" },
+	{ SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV, "max_op_pix_clk_div" },
+	{ SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ, "min_op_pix_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ, "max_op_pix_clk_freq_hz" }, /* 45 */
+	{ SMIAPP_REG_U16_X_ADDR_MIN, "x_addr_min" },
+	{ SMIAPP_REG_U16_Y_ADDR_MIN, "y_addr_min" },
+	{ SMIAPP_REG_U16_X_ADDR_MAX, "x_addr_max" },
+	{ SMIAPP_REG_U16_Y_ADDR_MAX, "y_addr_max" },
+	{ SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE, "min_x_output_size" }, /* 50 */
+	{ SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE, "min_y_output_size" },
+	{ SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE, "max_x_output_size" },
+	{ SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE, "max_y_output_size" },
+	{ SMIAPP_REG_U16_MIN_EVEN_INC, "min_even_inc" },
+	{ SMIAPP_REG_U16_MAX_EVEN_INC, "max_even_inc" }, /* 55 */
+	{ SMIAPP_REG_U16_MIN_ODD_INC, "min_odd_inc" },
+	{ SMIAPP_REG_U16_MAX_ODD_INC, "max_odd_inc" },
+	{ SMIAPP_REG_U16_SCALING_CAPABILITY, "scaling_capability" },
+	{ SMIAPP_REG_U16_SCALER_M_MIN, "scaler_m_min" },
+	{ SMIAPP_REG_U16_SCALER_M_MAX, "scaler_m_max" }, /* 60 */
+	{ SMIAPP_REG_U16_SCALER_N_MIN, "scaler_n_min" },
+	{ SMIAPP_REG_U16_SCALER_N_MAX, "scaler_n_max" },
+	{ SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY, "spatial_sampling_capability" },
+	{ SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY, "digital_crop_capability" },
+	{ SMIAPP_REG_U16_COMPRESSION_CAPABILITY, "compression_capability" }, /* 65 */
+	{ SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY, "fifo_support_capability" },
+	{ SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY, "dphy_ctrl_capability" },
+	{ SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY, "csi_lane_mode_capability" },
+	{ SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY, "csi_signalling_mode_capability" },
+	{ SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY, "fast_standby_capability" }, /* 70 */
+	{ SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY, "cci_address_control_capability" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS, "max_per_lane_bitrate_1_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS, "max_per_lane_bitrate_2_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS, "max_per_lane_bitrate_3_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS, "max_per_lane_bitrate_4_lane_mode_mbps" }, /* 75 */
+	{ SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY, "temp_sensor_capability" },
+	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN, "min_frame_length_lines_bin" },
+	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN, "max_frame_length_lines_bin" },
+	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN, "min_line_length_pck_bin" },
+	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN, "max_line_length_pck_bin" }, /* 80 */
+	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN, "min_line_blanking_pck_bin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN, "fine_integration_time_min_bin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, "fine_integration_time_max_margin_bin" },
+	{ SMIAPP_REG_U8_BINNING_CAPABILITY, "binning_capability" },
+	{ SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY, "binning_weighting_capability" }, /* 85 */
+	{ SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY, "data_transfer_if_capability" },
+	{ SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY, "shading_correction_capability" },
+	{ SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY, "green_imbalance_capability" },
+	{ SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY, "black_level_capability" },
+	{ SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY, "module_specific_correction_capability" }, /* 90 */
+	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY, "defect_correction_capability" },
+	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2, "defect_correction_capability_2" },
+	{ SMIAPP_REG_U8_EDOF_CAPABILITY, "edof_capability" },
+	{ SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY, "colour_feedback_capability" },
+	{ SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY, "estimation_mode_capability" }, /* 95 */
+	{ SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY, "estimation_zone_capability" },
+	{ SMIAPP_REG_U16_CAPABILITY_TRDY_MIN, "capability_trdy_min" },
+	{ SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, "flash_mode_capability" },
+	{ SMIAPP_REG_U8_ACTUATOR_CAPABILITY, "actuator_capability" },
+	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1, "bracketing_lut_capability_1" }, /* 100 */
+	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2, "bracketing_lut_capability_2" },
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP, "analogue_gain_code_step" },
+	{ 0, NULL },
+};
diff --git a/drivers/media/video/smiapp/smiapp-limits.h b/drivers/media/video/smiapp/smiapp-limits.h
new file mode 100644
index 0000000..7f4836bb
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-limits.h
@@ -0,0 +1,128 @@
+/*
+ * drivers/media/video/smiapp/smiapp-limits.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CAPABILITY			0
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN			1
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX			2
+#define SMIAPP_LIMIT_THS_ZERO_MIN				3
+#define SMIAPP_LIMIT_TCLK_TRAIL_MIN				4
+#define SMIAPP_LIMIT_INTEGRATION_TIME_CAPABILITY		5
+#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MIN		6
+#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN		7
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN			8
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN		9
+#define SMIAPP_LIMIT_DIGITAL_GAIN_CAPABILITY			10
+#define SMIAPP_LIMIT_DIGITAL_GAIN_MIN				11
+#define SMIAPP_LIMIT_DIGITAL_GAIN_MAX				12
+#define SMIAPP_LIMIT_MIN_EXT_CLK_FREQ_HZ			13
+#define SMIAPP_LIMIT_MAX_EXT_CLK_FREQ_HZ			14
+#define SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV			15
+#define SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV			16
+#define SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ				17
+#define SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ				18
+#define SMIAPP_LIMIT_MIN_PLL_MULTIPLIER				19
+#define SMIAPP_LIMIT_MAX_PLL_MULTIPLIER				20
+#define SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ				21
+#define SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ				22
+#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV				23
+#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV				24
+#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ			25
+#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ			26
+#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ			27
+#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ			28
+#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV				29
+#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV				30
+#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES			31
+#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES			32
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK			33
+#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK			34
+#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK			35
+#define SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES			36
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_STEP_SIZE		37
+#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV				38
+#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV				39
+#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ			40
+#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ			41
+#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV				42
+#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV				43
+#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ			44
+#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ			45
+#define SMIAPP_LIMIT_X_ADDR_MIN					46
+#define SMIAPP_LIMIT_Y_ADDR_MIN					47
+#define SMIAPP_LIMIT_X_ADDR_MAX					48
+#define SMIAPP_LIMIT_Y_ADDR_MAX					49
+#define SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE				50
+#define SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE				51
+#define SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE				52
+#define SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE				53
+#define SMIAPP_LIMIT_MIN_EVEN_INC				54
+#define SMIAPP_LIMIT_MAX_EVEN_INC				55
+#define SMIAPP_LIMIT_MIN_ODD_INC				56
+#define SMIAPP_LIMIT_MAX_ODD_INC				57
+#define SMIAPP_LIMIT_SCALING_CAPABILITY				58
+#define SMIAPP_LIMIT_SCALER_M_MIN				59
+#define SMIAPP_LIMIT_SCALER_M_MAX				60
+#define SMIAPP_LIMIT_SCALER_N_MIN				61
+#define SMIAPP_LIMIT_SCALER_N_MAX				62
+#define SMIAPP_LIMIT_SPATIAL_SAMPLING_CAPABILITY		63
+#define SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY			64
+#define SMIAPP_LIMIT_COMPRESSION_CAPABILITY			65
+#define SMIAPP_LIMIT_FIFO_SUPPORT_CAPABILITY			66
+#define SMIAPP_LIMIT_DPHY_CTRL_CAPABILITY			67
+#define SMIAPP_LIMIT_CSI_LANE_MODE_CAPABILITY			68
+#define SMIAPP_LIMIT_CSI_SIGNALLING_MODE_CAPABILITY		69
+#define SMIAPP_LIMIT_FAST_STANDBY_CAPABILITY			70
+#define SMIAPP_LIMIT_CCI_ADDRESS_CONTROL_CAPABILITY		71
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	72
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	73
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	74
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	75
+#define SMIAPP_LIMIT_TEMP_SENSOR_CAPABILITY			76
+#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN			77
+#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN			78
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN			79
+#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN			80
+#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN			81
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN		82
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	83
+#define SMIAPP_LIMIT_BINNING_CAPABILITY				84
+#define SMIAPP_LIMIT_BINNING_WEIGHTING_CAPABILITY		85
+#define SMIAPP_LIMIT_DATA_TRANSFER_IF_CAPABILITY		86
+#define SMIAPP_LIMIT_SHADING_CORRECTION_CAPABILITY		87
+#define SMIAPP_LIMIT_GREEN_IMBALANCE_CAPABILITY			88
+#define SMIAPP_LIMIT_BLACK_LEVEL_CAPABILITY			89
+#define SMIAPP_LIMIT_MODULE_SPECIFIC_CORRECTION_CAPABILITY	90
+#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY		91
+#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY_2		92
+#define SMIAPP_LIMIT_EDOF_CAPABILITY				93
+#define SMIAPP_LIMIT_COLOUR_FEEDBACK_CAPABILITY			94
+#define SMIAPP_LIMIT_ESTIMATION_MODE_CAPABILITY			95
+#define SMIAPP_LIMIT_ESTIMATION_ZONE_CAPABILITY			96
+#define SMIAPP_LIMIT_CAPABILITY_TRDY_MIN			97
+#define SMIAPP_LIMIT_FLASH_MODE_CAPABILITY			98
+#define SMIAPP_LIMIT_ACTUATOR_CAPABILITY			99
+#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_1		100
+#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_2		101
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP			102
+#define SMIAPP_LIMIT_LAST					103
diff --git a/drivers/media/video/smiapp/smiapp-quirk.c b/drivers/media/video/smiapp/smiapp-quirk.c
new file mode 100644
index 0000000..dae85a1
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-quirk.c
@@ -0,0 +1,264 @@
+/*
+ * drivers/media/video/smiapp/smiapp-quirk.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+
+#include "smiapp.h"
+
+static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	return smiapp_write(client, (SMIA_REG_8BIT << 16) | reg, val);
+}
+
+static int smiapp_write_8s(struct smiapp_sensor *sensor,
+			   struct smiapp_reg_8 *regs, int len)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	for (; len > 0; len--, regs++) {
+		rval = smiapp_write_8(sensor, regs->reg, regs->val);
+		if (rval < 0) {
+			dev_err(&client->dev,
+				"error %d writing reg 0x%4.4x, val 0x%2.2x",
+				rval, regs->reg, regs->val);
+			return rval;
+		}
+	}
+
+	return 0;
+}
+
+void smiapp_replace_limit(struct smiapp_sensor *sensor,
+			  u32 limit, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
+		smiapp_reg_limits[limit].addr,
+		smiapp_reg_limits[limit].what, val, val);
+	sensor->limits[limit] = val;
+}
+
+int smiapp_replace_limit_at(struct smiapp_sensor *sensor,
+			    u32 reg, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int i;
+
+	for (i = 0; smiapp_reg_limits[i].addr; i++) {
+		if ((smiapp_reg_limits[i].addr & 0xffff) != reg)
+			continue;
+
+		smiapp_replace_limit(sensor, i, val);
+
+		return 0;
+	}
+
+	dev_dbg(&client->dev, "quirk: bad register 0x%4.4x\n", reg);
+
+	return -EINVAL;
+}
+
+static int jt8ew9_limits(struct smiapp_sensor *sensor)
+{
+	if (sensor->minfo.revision_number_major < 0x03)
+		sensor->frame_skip = 1;
+
+	/* Below 24 gain doesn't have effect at all, */
+	/* but ~59 is needed for full dynamic range */
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
+	smiapp_replace_limit(
+		sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
+
+	return 0;
+}
+
+static int jt8ew9_post_poweron(struct smiapp_sensor *sensor)
+{
+	struct smiapp_reg_8 regs[] = {
+		{ 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */
+		{ 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
+		{ 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
+		{ 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */
+		{ 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		{ 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		{ 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		/* Taken from v03. No idea what the rest are. */
+		{ 0x32e0, 0x05 },
+		{ 0x32e1, 0x05 },
+		{ 0x32e2, 0x04 },
+		{ 0x32e5, 0x04 },
+		{ 0x32e6, 0x04 },
+
+	};
+
+	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+}
+
+const struct smiapp_quirk smiapp_jt8ew9_quirk = {
+	.limits = jt8ew9_limits,
+	.post_poweron = jt8ew9_post_poweron,
+};
+
+static int imx125es_post_poweron(struct smiapp_sensor *sensor)
+{
+	/* Taken from v02. No idea what the other two are. */
+	struct smiapp_reg_8 regs[] = {
+		/*
+		 * 0x3302: clk during frame blanking:
+		 * 0x00 - HS mode, 0x01 - LP11
+		 */
+		{ 0x3302, 0x01 },
+		{ 0x302d, 0x00 },
+		{ 0x3b08, 0x8c },
+	};
+
+	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+}
+
+const struct smiapp_quirk smiapp_imx125es_quirk = {
+	.post_poweron = imx125es_post_poweron,
+};
+
+static int jt8ev1_limits(struct smiapp_sensor *sensor)
+{
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
+	smiapp_replace_limit(sensor,
+			     SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
+
+	return 0;
+}
+
+static int jt8ev1_post_poweron(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	struct smiapp_reg_8 regs[] = {
+		{ 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */
+		{ 0x30a3, 0xd0 }, /* FLASH STROBE enable */
+		{ 0x3237, 0x00 }, /* For control of pulse timing for ADC */
+		{ 0x3238, 0x43 },
+		{ 0x3301, 0x06 }, /* For analog bias for sensor */
+		{ 0x3302, 0x06 },
+		{ 0x3304, 0x00 },
+		{ 0x3305, 0x88 },
+		{ 0x332a, 0x14 },
+		{ 0x332c, 0x6b },
+		{ 0x3336, 0x01 },
+		{ 0x333f, 0x1f },
+		{ 0x3355, 0x00 },
+		{ 0x3356, 0x20 },
+		{ 0x33bf, 0x20 }, /* Adjust the FBC speed */
+		{ 0x33c9, 0x20 },
+		{ 0x33ce, 0x30 }, /* Adjust the parameter for logic function */
+		{ 0x33cf, 0xec }, /* For Black sun */
+		{ 0x3328, 0x80 }, /* Ugh. No idea what's this. */
+	};
+
+	struct smiapp_reg_8 regs_96[] = {
+		{ 0x30ae, 0x00 }, /* For control of ADC clock */
+		{ 0x30af, 0xd0 },
+		{ 0x30b0, 0x01 },
+	};
+
+	rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+	if (rval < 0)
+		return rval;
+
+	switch (sensor->platform_data->ext_clk) {
+	case 9600000:
+		return smiapp_write_8s(sensor, regs_96,
+				       ARRAY_SIZE(regs_96));
+	default:
+		dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
+			 sensor->platform_data->ext_clk);
+		return 0;
+	}
+}
+
+static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor)
+{
+	return smiapp_write_8(sensor, 0x3328, 0x00);
+}
+
+static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
+{
+	int rval;
+
+	/* Workaround: allows fast standby to work properly */
+	rval = smiapp_write_8(sensor, 0x3205, 0x04);
+	if (rval < 0)
+		return rval;
+
+	/* Wait for 1 ms + one line => 2 ms is likely enough */
+	usleep_range(2000, 2000);
+
+	/* Restore it */
+	rval = smiapp_write_8(sensor, 0x3205, 0x00);
+	if (rval < 0)
+		return rval;
+
+	return smiapp_write_8(sensor, 0x3328, 0x80);
+}
+
+const struct smiapp_quirk smiapp_jt8ev1_quirk = {
+	.limits = jt8ev1_limits,
+	.post_poweron = jt8ev1_post_poweron,
+	.pre_streamon = jt8ev1_pre_streamon,
+	.post_streamoff = jt8ev1_post_streamoff,
+	.flags = SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE,
+};
+
+static int tcm8500md_limits(struct smiapp_sensor *sensor)
+{
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
+
+	return 0;
+}
+
+const struct smiapp_quirk smiapp_tcm8500md_quirk = {
+	.limits = tcm8500md_limits,
+};
diff --git a/drivers/media/video/smiapp/smiapp-quirk.h b/drivers/media/video/smiapp/smiapp-quirk.h
new file mode 100644
index 0000000..7a1b3a0
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-quirk.h
@@ -0,0 +1,72 @@
+/*
+ * drivers/media/video/smiapp/smiapp-quirk.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_QUIRK__
+#define __SMIAPP_QUIRK__
+
+struct smiapp_sensor;
+
+/**
+ * struct smiapp_quirk - quirks for sensors that deviate from SMIA++ standard
+ *
+ * @limits: Replace sensor->limits with values which can't be read from
+ *	    sensor registers. Called the first time the sensor is powered up.
+ * @post_poweron: Called always after the sensor has been fully powered on.
+ * @pre_streamon: Called just before streaming is enabled.
+ * @post_streamon: Called right after stopping streaming.
+ */
+struct smiapp_quirk {
+	int (*limits)(struct smiapp_sensor *sensor);
+	int (*post_poweron)(struct smiapp_sensor *sensor);
+	int (*pre_streamon)(struct smiapp_sensor *sensor);
+	int (*post_streamoff)(struct smiapp_sensor *sensor);
+	unsigned long flags;
+};
+
+/* op pix clock is for all lanes in total normally */
+#define SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
+
+struct smiapp_reg_8 {
+	u16 reg;
+	u8 val;
+};
+
+void smiapp_replace_limit(struct smiapp_sensor *sensor,
+			  u32 limit, u32 val);
+
+#define smiapp_call_quirk(_sensor, _quirk, ...)				\
+	(_sensor->minfo.quirk &&					\
+	 _sensor->minfo.quirk->_quirk ?					\
+	 _sensor->minfo.quirk->_quirk(_sensor, ##__VA_ARGS__) : 0)
+
+#define smiapp_needs_quirk(_sensor, _quirk)		\
+	(_sensor->minfo.quirk ?				\
+	 _sensor->minfo.quirk->flags & _quirk : 0)
+
+extern const struct smiapp_quirk smiapp_jt8ev1_quirk;
+extern const struct smiapp_quirk smiapp_imx125es_quirk;
+extern const struct smiapp_quirk smiapp_jt8ew9_quirk;
+extern const struct smiapp_quirk smiapp_tcm8500md_quirk;
+
+#endif /* __SMIAPP_QUIRK__ */
diff --git a/drivers/media/video/smiapp/smiapp-reg-defs.h b/drivers/media/video/smiapp/smiapp-reg-defs.h
new file mode 100644
index 0000000..a089eb8
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-reg-defs.h
@@ -0,0 +1,503 @@
+/*
+ * drivers/media/video/smiapp/smiapp-reg-defs.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#define SMIAPP_REG_MK_U8(r) ((SMIA_REG_8BIT << 16) | (r))
+#define SMIAPP_REG_MK_U16(r) ((SMIA_REG_16BIT << 16) | (r))
+#define SMIAPP_REG_MK_U32(r) ((SMIA_REG_32BIT << 16) | (r))
+
+#define SMIAPP_REG_MK_F32(r) (SMIA_REG_FLAG_FLOAT | (SMIA_REG_32BIT << 16) | (r))
+
+#define SMIAPP_REG_U16_MODEL_ID					SMIAPP_REG_MK_U16(0x0000)
+#define SMIAPP_REG_U8_REVISION_NUMBER_MAJOR			SMIAPP_REG_MK_U8(0x0002)
+#define SMIAPP_REG_U8_MANUFACTURER_ID				SMIAPP_REG_MK_U8(0x0003)
+#define SMIAPP_REG_U8_SMIA_VERSION				SMIAPP_REG_MK_U8(0x0004)
+#define SMIAPP_REG_U8_FRAME_COUNT				SMIAPP_REG_MK_U8(0x0005)
+#define SMIAPP_REG_U8_PIXEL_ORDER				SMIAPP_REG_MK_U8(0x0006)
+#define SMIAPP_REG_U16_DATA_PEDESTAL				SMIAPP_REG_MK_U16(0x0008)
+#define SMIAPP_REG_U8_PIXEL_DEPTH				SMIAPP_REG_MK_U8(0x000c)
+#define SMIAPP_REG_U8_REVISION_NUMBER_MINOR			SMIAPP_REG_MK_U8(0x0010)
+#define SMIAPP_REG_U8_SMIAPP_VERSION				SMIAPP_REG_MK_U8(0x0011)
+#define SMIAPP_REG_U8_MODULE_DATE_YEAR				SMIAPP_REG_MK_U8(0x0012)
+#define SMIAPP_REG_U8_MODULE_DATE_MONTH				SMIAPP_REG_MK_U8(0x0013)
+#define SMIAPP_REG_U8_MODULE_DATE_DAY				SMIAPP_REG_MK_U8(0x0014)
+#define SMIAPP_REG_U8_MODULE_DATE_PHASE				SMIAPP_REG_MK_U8(0x0015)
+#define SMIAPP_REG_U16_SENSOR_MODEL_ID				SMIAPP_REG_MK_U16(0x0016)
+#define SMIAPP_REG_U8_SENSOR_REVISION_NUMBER			SMIAPP_REG_MK_U8(0x0018)
+#define SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID			SMIAPP_REG_MK_U8(0x0019)
+#define SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION			SMIAPP_REG_MK_U8(0x001a)
+#define SMIAPP_REG_U32_SERIAL_NUMBER				SMIAPP_REG_MK_U32(0x001c)
+#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x0040)
+#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE		SMIAPP_REG_MK_U8(0x0041)
+#define SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(n)		SMIAPP_REG_MK_U16(0x0042 + ((n) << 1)) /* 0 <= n <= 14 */
+#define SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(n)		SMIAPP_REG_MK_U32(0x0060 + ((n) << 2)) /* 0 <= n <= 7 */
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x0080)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN			SMIAPP_REG_MK_U16(0x0084)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX			SMIAPP_REG_MK_U16(0x0086)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP			SMIAPP_REG_MK_U16(0x0088)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_TYPE			SMIAPP_REG_MK_U16(0x008a)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_M0				SMIAPP_REG_MK_U16(0x008c)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_C0				SMIAPP_REG_MK_U16(0x008e)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_M1				SMIAPP_REG_MK_U16(0x0090)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_C1				SMIAPP_REG_MK_U16(0x0092)
+#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x00c0)
+#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_SUBTYPE			SMIAPP_REG_MK_U8(0x00c1)
+#define SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(n)		SMIAPP_REG_MK_U16(0x00c2 + ((n) << 1))
+#define SMIAPP_REG_U8_MODE_SELECT				SMIAPP_REG_MK_U8(0x0100)
+#define SMIAPP_REG_U8_IMAGE_ORIENTATION				SMIAPP_REG_MK_U8(0x0101)
+#define SMIAPP_REG_U8_SOFTWARE_RESET				SMIAPP_REG_MK_U8(0x0103)
+#define SMIAPP_REG_U8_GROUPED_PARAMETER_HOLD			SMIAPP_REG_MK_U8(0x0104)
+#define SMIAPP_REG_U8_MASK_CORRUPTED_FRAMES			SMIAPP_REG_MK_U8(0x0105)
+#define SMIAPP_REG_U8_FAST_STANDBY_CTRL				SMIAPP_REG_MK_U8(0x0106)
+#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0107)
+#define SMIAPP_REG_U8_2ND_CCI_IF_CONTROL			SMIAPP_REG_MK_U8(0x0108)
+#define SMIAPP_REG_U8_2ND_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0109)
+#define SMIAPP_REG_U8_CSI_CHANNEL_IDENTIFIER			SMIAPP_REG_MK_U8(0x0110)
+#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE			SMIAPP_REG_MK_U8(0x0111)
+#define SMIAPP_REG_U16_CSI_DATA_FORMAT				SMIAPP_REG_MK_U16(0x0112)
+#define SMIAPP_REG_U8_CSI_LANE_MODE				SMIAPP_REG_MK_U8(0x0114)
+#define SMIAPP_REG_U8_CSI2_10_TO_8_DT				SMIAPP_REG_MK_U8(0x0115)
+#define SMIAPP_REG_U8_CSI2_10_TO_7_DT				SMIAPP_REG_MK_U8(0x0116)
+#define SMIAPP_REG_U8_CSI2_10_TO_6_DT				SMIAPP_REG_MK_U8(0x0117)
+#define SMIAPP_REG_U8_CSI2_12_TO_8_DT				SMIAPP_REG_MK_U8(0x0118)
+#define SMIAPP_REG_U8_CSI2_12_TO_7_DT				SMIAPP_REG_MK_U8(0x0119)
+#define SMIAPP_REG_U8_CSI2_12_TO_6_DT				SMIAPP_REG_MK_U8(0x011a)
+#define SMIAPP_REG_U8_CSI2_14_TO_10_DT				SMIAPP_REG_MK_U8(0x011b)
+#define SMIAPP_REG_U8_CSI2_14_TO_8_DT				SMIAPP_REG_MK_U8(0x011c)
+#define SMIAPP_REG_U8_CSI2_16_TO_10_DT				SMIAPP_REG_MK_U8(0x011d)
+#define SMIAPP_REG_U8_CSI2_16_TO_8_DT				SMIAPP_REG_MK_U8(0x011e)
+#define SMIAPP_REG_U8_GAIN_MODE					SMIAPP_REG_MK_U8(0x0120)
+#define SMIAPP_REG_U16_VANA_VOLTAGE				SMIAPP_REG_MK_U16(0x0130)
+#define SMIAPP_REG_U16_VDIG_VOLTAGE				SMIAPP_REG_MK_U16(0x0132)
+#define SMIAPP_REG_U16_VIO_VOLTAGE				SMIAPP_REG_MK_U16(0x0134)
+#define SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ			SMIAPP_REG_MK_U16(0x0136)
+#define SMIAPP_REG_U8_TEMP_SENSOR_CONTROL			SMIAPP_REG_MK_U8(0x0138)
+#define SMIAPP_REG_U8_TEMP_SENSOR_MODE				SMIAPP_REG_MK_U8(0x0139)
+#define SMIAPP_REG_U8_TEMP_SENSOR_OUTPUT			SMIAPP_REG_MK_U8(0x013a)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0200)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0202)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL		SMIAPP_REG_MK_U16(0x0204)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENR		SMIAPP_REG_MK_U16(0x0206)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_RED			SMIAPP_REG_MK_U16(0x0208)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_BLUE			SMIAPP_REG_MK_U16(0x020a)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENB		SMIAPP_REG_MK_U16(0x020c)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENR			SMIAPP_REG_MK_U16(0x020e)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_RED				SMIAPP_REG_MK_U16(0x0210)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0212)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0214)
+#define SMIAPP_REG_U16_VT_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0300)
+#define SMIAPP_REG_U16_VT_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x0302)
+#define SMIAPP_REG_U16_PRE_PLL_CLK_DIV				SMIAPP_REG_MK_U16(0x0304)
+#define SMIAPP_REG_U16_PLL_MULTIPLIER				SMIAPP_REG_MK_U16(0x0306)
+#define SMIAPP_REG_U16_OP_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0308)
+#define SMIAPP_REG_U16_OP_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x030a)
+#define SMIAPP_REG_U16_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x0340)
+#define SMIAPP_REG_U16_LINE_LENGTH_PCK				SMIAPP_REG_MK_U16(0x0342)
+#define SMIAPP_REG_U16_X_ADDR_START				SMIAPP_REG_MK_U16(0x0344)
+#define SMIAPP_REG_U16_Y_ADDR_START				SMIAPP_REG_MK_U16(0x0346)
+#define SMIAPP_REG_U16_X_ADDR_END				SMIAPP_REG_MK_U16(0x0348)
+#define SMIAPP_REG_U16_Y_ADDR_END				SMIAPP_REG_MK_U16(0x034a)
+#define SMIAPP_REG_U16_X_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034c)
+#define SMIAPP_REG_U16_Y_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034e)
+#define SMIAPP_REG_U16_X_EVEN_INC				SMIAPP_REG_MK_U16(0x0380)
+#define SMIAPP_REG_U16_X_ODD_INC				SMIAPP_REG_MK_U16(0x0382)
+#define SMIAPP_REG_U16_Y_EVEN_INC				SMIAPP_REG_MK_U16(0x0384)
+#define SMIAPP_REG_U16_Y_ODD_INC				SMIAPP_REG_MK_U16(0x0386)
+#define SMIAPP_REG_U16_SCALING_MODE				SMIAPP_REG_MK_U16(0x0400)
+#define SMIAPP_REG_U16_SPATIAL_SAMPLING				SMIAPP_REG_MK_U16(0x0402)
+#define SMIAPP_REG_U16_SCALE_M					SMIAPP_REG_MK_U16(0x0404)
+#define SMIAPP_REG_U16_SCALE_N					SMIAPP_REG_MK_U16(0x0406)
+#define SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET			SMIAPP_REG_MK_U16(0x0408)
+#define SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET			SMIAPP_REG_MK_U16(0x040a)
+#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH			SMIAPP_REG_MK_U16(0x040c)
+#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT		SMIAPP_REG_MK_U16(0x040e)
+#define SMIAPP_REG_U16_COMPRESSION_MODE				SMIAPP_REG_MK_U16(0x0500)
+#define SMIAPP_REG_U16_TEST_PATTERN_MODE			SMIAPP_REG_MK_U16(0x0600)
+#define SMIAPP_REG_U16_TEST_DATA_RED				SMIAPP_REG_MK_U16(0x0602)
+#define SMIAPP_REG_U16_TEST_DATA_GREENR				SMIAPP_REG_MK_U16(0x0604)
+#define SMIAPP_REG_U16_TEST_DATA_BLUE				SMIAPP_REG_MK_U16(0x0606)
+#define SMIAPP_REG_U16_TEST_DATA_GREENB				SMIAPP_REG_MK_U16(0x0608)
+#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060a)
+#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_POSITION		SMIAPP_REG_MK_U16(0x060c)
+#define SMIAPP_REG_U16_VERTICAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060e)
+#define SMIAPP_REG_U16_VERTICAL_CURSOR_POSITION			SMIAPP_REG_MK_U16(0x0610)
+#define SMIAPP_REG_U16_FIFO_WATER_MARK_PIXELS			SMIAPP_REG_MK_U16(0x0700)
+#define SMIAPP_REG_U8_TCLK_POST					SMIAPP_REG_MK_U8(0x0800)
+#define SMIAPP_REG_U8_THS_PREPARE				SMIAPP_REG_MK_U8(0x0801)
+#define SMIAPP_REG_U8_THS_ZERO_MIN				SMIAPP_REG_MK_U8(0x0802)
+#define SMIAPP_REG_U8_THS_TRAIL					SMIAPP_REG_MK_U8(0x0803)
+#define SMIAPP_REG_U8_TCLK_TRAIL_MIN				SMIAPP_REG_MK_U8(0x0804)
+#define SMIAPP_REG_U8_TCLK_PREPARE				SMIAPP_REG_MK_U8(0x0805)
+#define SMIAPP_REG_U8_TCLK_ZERO					SMIAPP_REG_MK_U8(0x0806)
+#define SMIAPP_REG_U8_TLPX					SMIAPP_REG_MK_U8(0x0807)
+#define SMIAPP_REG_U8_DPHY_CTRL					SMIAPP_REG_MK_U8(0x0808)
+#define SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS		SMIAPP_REG_MK_U32(0x0820)
+#define SMIAPP_REG_U8_BINNING_MODE				SMIAPP_REG_MK_U8(0x0900)
+#define SMIAPP_REG_U8_BINNING_TYPE				SMIAPP_REG_MK_U8(0x0901)
+#define SMIAPP_REG_U8_BINNING_WEIGHTING				SMIAPP_REG_MK_U8(0x0902)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL			SMIAPP_REG_MK_U8(0x0a00)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS			SMIAPP_REG_MK_U8(0x0a01)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a02)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0			SMIAPP_REG_MK_U8(0x0a04)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_1			SMIAPP_REG_MK_U8(0x0a05)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_2			SMIAPP_REG_MK_U8(0x0a06)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_3			SMIAPP_REG_MK_U8(0x0a07)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_4			SMIAPP_REG_MK_U8(0x0a08)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_5			SMIAPP_REG_MK_U8(0x0a09)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_12		SMIAPP_REG_MK_U8(0x0a10)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_13		SMIAPP_REG_MK_U8(0x0a11)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_14		SMIAPP_REG_MK_U8(0x0a12)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_15		SMIAPP_REG_MK_U8(0x0a13)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_16		SMIAPP_REG_MK_U8(0x0a14)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_17		SMIAPP_REG_MK_U8(0x0a15)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_18		SMIAPP_REG_MK_U8(0x0a16)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_19		SMIAPP_REG_MK_U8(0x0a17)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_20		SMIAPP_REG_MK_U8(0x0a18)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_21		SMIAPP_REG_MK_U8(0x0a19)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_22		SMIAPP_REG_MK_U8(0x0a1a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_23		SMIAPP_REG_MK_U8(0x0a1b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_24		SMIAPP_REG_MK_U8(0x0a1c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_25		SMIAPP_REG_MK_U8(0x0a1d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_26		SMIAPP_REG_MK_U8(0x0a1e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_27		SMIAPP_REG_MK_U8(0x0a1f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_28		SMIAPP_REG_MK_U8(0x0a20)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_29		SMIAPP_REG_MK_U8(0x0a21)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_30		SMIAPP_REG_MK_U8(0x0a22)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_31		SMIAPP_REG_MK_U8(0x0a23)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_32		SMIAPP_REG_MK_U8(0x0a24)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_33		SMIAPP_REG_MK_U8(0x0a25)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_34		SMIAPP_REG_MK_U8(0x0a26)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_35		SMIAPP_REG_MK_U8(0x0a27)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_36		SMIAPP_REG_MK_U8(0x0a28)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_37		SMIAPP_REG_MK_U8(0x0a29)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_38		SMIAPP_REG_MK_U8(0x0a2a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_39		SMIAPP_REG_MK_U8(0x0a2b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_40		SMIAPP_REG_MK_U8(0x0a2c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_41		SMIAPP_REG_MK_U8(0x0a2d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_42		SMIAPP_REG_MK_U8(0x0a2e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_43		SMIAPP_REG_MK_U8(0x0a2f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_44		SMIAPP_REG_MK_U8(0x0a30)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_45		SMIAPP_REG_MK_U8(0x0a31)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_46		SMIAPP_REG_MK_U8(0x0a32)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_47		SMIAPP_REG_MK_U8(0x0a33)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_48		SMIAPP_REG_MK_U8(0x0a34)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_49		SMIAPP_REG_MK_U8(0x0a35)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_50		SMIAPP_REG_MK_U8(0x0a36)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_51		SMIAPP_REG_MK_U8(0x0a37)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_52		SMIAPP_REG_MK_U8(0x0a38)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_53		SMIAPP_REG_MK_U8(0x0a39)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_54		SMIAPP_REG_MK_U8(0x0a3a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_55		SMIAPP_REG_MK_U8(0x0a3b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_56		SMIAPP_REG_MK_U8(0x0a3c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_57		SMIAPP_REG_MK_U8(0x0a3d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_58		SMIAPP_REG_MK_U8(0x0a3e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_59		SMIAPP_REG_MK_U8(0x0a3f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_60		SMIAPP_REG_MK_U8(0x0a40)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_61		SMIAPP_REG_MK_U8(0x0a41)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_62		SMIAPP_REG_MK_U8(0x0a42)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_63		SMIAPP_REG_MK_U8(0x0a43)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_CTRL			SMIAPP_REG_MK_U8(0x0a44)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_STATUS			SMIAPP_REG_MK_U8(0x0a45)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a46)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_0			SMIAPP_REG_MK_U8(0x0a48)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_1			SMIAPP_REG_MK_U8(0x0a49)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_2			SMIAPP_REG_MK_U8(0x0a4a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_3			SMIAPP_REG_MK_U8(0x0a4b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_4			SMIAPP_REG_MK_U8(0x0a4c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_5			SMIAPP_REG_MK_U8(0x0a4d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_6			SMIAPP_REG_MK_U8(0x0a4e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_7			SMIAPP_REG_MK_U8(0x0a4f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_8			SMIAPP_REG_MK_U8(0x0a50)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_9			SMIAPP_REG_MK_U8(0x0a51)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_10		SMIAPP_REG_MK_U8(0x0a52)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_11		SMIAPP_REG_MK_U8(0x0a53)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_12		SMIAPP_REG_MK_U8(0x0a54)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_13		SMIAPP_REG_MK_U8(0x0a55)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_14		SMIAPP_REG_MK_U8(0x0a56)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_15		SMIAPP_REG_MK_U8(0x0a57)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_16		SMIAPP_REG_MK_U8(0x0a58)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_17		SMIAPP_REG_MK_U8(0x0a59)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_18		SMIAPP_REG_MK_U8(0x0a5a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_19		SMIAPP_REG_MK_U8(0x0a5b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_20		SMIAPP_REG_MK_U8(0x0a5c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_21		SMIAPP_REG_MK_U8(0x0a5d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_22		SMIAPP_REG_MK_U8(0x0a5e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_23		SMIAPP_REG_MK_U8(0x0a5f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_24		SMIAPP_REG_MK_U8(0x0a60)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_25		SMIAPP_REG_MK_U8(0x0a61)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_26		SMIAPP_REG_MK_U8(0x0a62)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_27		SMIAPP_REG_MK_U8(0x0a63)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_28		SMIAPP_REG_MK_U8(0x0a64)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_29		SMIAPP_REG_MK_U8(0x0a65)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_30		SMIAPP_REG_MK_U8(0x0a66)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_31		SMIAPP_REG_MK_U8(0x0a67)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_32		SMIAPP_REG_MK_U8(0x0a68)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_33		SMIAPP_REG_MK_U8(0x0a69)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_34		SMIAPP_REG_MK_U8(0x0a6a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_35		SMIAPP_REG_MK_U8(0x0a6b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_36		SMIAPP_REG_MK_U8(0x0a6c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_37		SMIAPP_REG_MK_U8(0x0a6d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_38		SMIAPP_REG_MK_U8(0x0a6e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_39		SMIAPP_REG_MK_U8(0x0a6f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_40		SMIAPP_REG_MK_U8(0x0a70)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_41		SMIAPP_REG_MK_U8(0x0a71)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_42		SMIAPP_REG_MK_U8(0x0a72)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_43		SMIAPP_REG_MK_U8(0x0a73)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_44		SMIAPP_REG_MK_U8(0x0a74)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_45		SMIAPP_REG_MK_U8(0x0a75)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_46		SMIAPP_REG_MK_U8(0x0a76)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_47		SMIAPP_REG_MK_U8(0x0a77)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_48		SMIAPP_REG_MK_U8(0x0a78)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_49		SMIAPP_REG_MK_U8(0x0a79)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_50		SMIAPP_REG_MK_U8(0x0a7a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_51		SMIAPP_REG_MK_U8(0x0a7b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_52		SMIAPP_REG_MK_U8(0x0a7c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_53		SMIAPP_REG_MK_U8(0x0a7d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_54		SMIAPP_REG_MK_U8(0x0a7e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_55		SMIAPP_REG_MK_U8(0x0a7f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_56		SMIAPP_REG_MK_U8(0x0a80)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_57		SMIAPP_REG_MK_U8(0x0a81)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_58		SMIAPP_REG_MK_U8(0x0a82)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_59		SMIAPP_REG_MK_U8(0x0a83)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_60		SMIAPP_REG_MK_U8(0x0a84)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_61		SMIAPP_REG_MK_U8(0x0a85)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_62		SMIAPP_REG_MK_U8(0x0a86)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_63		SMIAPP_REG_MK_U8(0x0a87)
+#define SMIAPP_REG_U8_SHADING_CORRECTION_ENABLE			SMIAPP_REG_MK_U8(0x0b00)
+#define SMIAPP_REG_U8_LUMINANCE_CORRECTION_LEVEL		SMIAPP_REG_MK_U8(0x0b01)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_ENABLE		SMIAPP_REG_MK_U8(0x0b02)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_WEIGHT		SMIAPP_REG_MK_U8(0x0b03)
+#define SMIAPP_REG_U8_BLACK_LEVEL_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b04)
+#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b05)
+#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b06)
+#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b07)
+#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b08)
+#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b09)
+#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0a)
+#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b0b)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b0c)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_WEIGHT		SMIAPP_REG_MK_U8(0x0b0d)
+#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0e)
+#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b0f)
+#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b10)
+#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b11)
+#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b12)
+#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b13)
+#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b14)
+#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b15)
+#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b16)
+#define SMIAPP_REG_U8_EDOF_MODE					SMIAPP_REG_MK_U8(0x0b80)
+#define SMIAPP_REG_U8_SHARPNESS					SMIAPP_REG_MK_U8(0x0b83)
+#define SMIAPP_REG_U8_DENOISING					SMIAPP_REG_MK_U8(0x0b84)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC				SMIAPP_REG_MK_U8(0x0b85)
+#define SMIAPP_REG_U16_DEPTH_OF_FIELD				SMIAPP_REG_MK_U16(0x0b86)
+#define SMIAPP_REG_U16_FOCUS_DISTANCE				SMIAPP_REG_MK_U16(0x0b88)
+#define SMIAPP_REG_U8_ESTIMATION_MODE_CTRL			SMIAPP_REG_MK_U8(0x0b8a)
+#define SMIAPP_REG_U16_COLOUR_TEMPERATURE			SMIAPP_REG_MK_U16(0x0b8c)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENR			SMIAPP_REG_MK_U16(0x0b8e)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_RED			SMIAPP_REG_MK_U16(0x0b90)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0b92)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0b94)
+#define SMIAPP_REG_U8_ESTIMATION_ZONE_MODE			SMIAPP_REG_MK_U8(0x0bc0)
+#define SMIAPP_REG_U16_FIXED_ZONE_WEIGHTING			SMIAPP_REG_MK_U16(0x0bc2)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_X_START			SMIAPP_REG_MK_U16(0x0bc4)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_Y_START			SMIAPP_REG_MK_U16(0x0bc6)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_WIDTH			SMIAPP_REG_MK_U16(0x0bc8)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_HEIGHT			SMIAPP_REG_MK_U16(0x0bca)
+#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL1			SMIAPP_REG_MK_U8(0x0c00)
+#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL2			SMIAPP_REG_MK_U8(0x0c01)
+#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_1		SMIAPP_REG_MK_U8(0x0c02)
+#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_2		SMIAPP_REG_MK_U8(0x0c03)
+#define SMIAPP_REG_U16_TRDY_CTRL				SMIAPP_REG_MK_U16(0x0c04)
+#define SMIAPP_REG_U16_TRDOUT_CTRL				SMIAPP_REG_MK_U16(0x0c06)
+#define SMIAPP_REG_U16_TSHUTTER_STROBE_DELAY_CTRL		SMIAPP_REG_MK_U16(0x0c08)
+#define SMIAPP_REG_U16_TSHUTTER_STROBE_WIDTH_CTRL		SMIAPP_REG_MK_U16(0x0c0a)
+#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c0c)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c0e)
+#define SMIAPP_REG_U16_TGRST_INTERVAL_CTRL			SMIAPP_REG_MK_U16(0x0c10)
+#define SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT			SMIAPP_REG_MK_U8(0x0c12)
+#define SMIAPP_REG_U16_FLASH_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c14)
+#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL		SMIAPP_REG_MK_U16(0x0c16)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL		SMIAPP_REG_MK_U16(0x0c18)
+#define SMIAPP_REG_U8_FLASH_MODE_RS				SMIAPP_REG_MK_U8(0x0c1a)
+#define SMIAPP_REG_U8_FLASH_TRIGGER_RS				SMIAPP_REG_MK_U8(0x0c1b)
+#define SMIAPP_REG_U8_FLASH_STATUS				SMIAPP_REG_MK_U8(0x0c1c)
+#define SMIAPP_REG_U8_SA_STROBE_MODE				SMIAPP_REG_MK_U8(0x0c1d)
+#define SMIAPP_REG_U16_SA_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c1e)
+#define SMIAPP_REG_U16_TSA_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c20)
+#define SMIAPP_REG_U16_TSA_STROBE_WIDTH_CTRL			SMIAPP_REG_MK_U16(0x0c22)
+#define SMIAPP_REG_U8_SA_STROBE_TRIGGER				SMIAPP_REG_MK_U8(0x0c24)
+#define SMIAPP_REG_U8_SPECIAL_ACTUATOR_STATUS			SMIAPP_REG_MK_U8(0x0c25)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_RS_CTRL	SMIAPP_REG_MK_U16(0x0c26)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_RS_CTRL		SMIAPP_REG_MK_U16(0x0c28)
+#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_RS_CTRL		SMIAPP_REG_MK_U8(0x0c2a)
+#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_CTRL			SMIAPP_REG_MK_U8(0x0c2b)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c2c)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_CTRL		SMIAPP_REG_MK_U16(0x0c2e)
+#define SMIAPP_REG_U8_LOW_LEVEL_CTRL				SMIAPP_REG_MK_U8(0x0c80)
+#define SMIAPP_REG_U16_MAIN_TRIGGER_REF_POINT			SMIAPP_REG_MK_U16(0x0c82)
+#define SMIAPP_REG_U16_MAIN_TRIGGER_T3				SMIAPP_REG_MK_U16(0x0c84)
+#define SMIAPP_REG_U8_MAIN_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c86)
+#define SMIAPP_REG_U16_PHASE1_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c88)
+#define SMIAPP_REG_U8_PHASE1_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8a)
+#define SMIAPP_REG_U16_PHASE2_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c8c)
+#define SMIAPP_REG_U8_PHASE2_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8e)
+#define SMIAPP_REG_U8_MECH_SHUTTER_CTRL				SMIAPP_REG_MK_U8(0x0d00)
+#define SMIAPP_REG_U8_OPERATION_MODE				SMIAPP_REG_MK_U8(0x0d01)
+#define SMIAPP_REG_U8_ACT_STATE1				SMIAPP_REG_MK_U8(0x0d02)
+#define SMIAPP_REG_U8_ACT_STATE2				SMIAPP_REG_MK_U8(0x0d03)
+#define SMIAPP_REG_U16_FOCUS_CHANGE				SMIAPP_REG_MK_U16(0x0d80)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_CONTROL			SMIAPP_REG_MK_U16(0x0d82)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE1		SMIAPP_REG_MK_U16(0x0d84)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE2		SMIAPP_REG_MK_U16(0x0d86)
+#define SMIAPP_REG_U8_STROBE_COUNT_PHASE1			SMIAPP_REG_MK_U8(0x0d88)
+#define SMIAPP_REG_U8_STROBE_COUNT_PHASE2			SMIAPP_REG_MK_U8(0x0d89)
+#define SMIAPP_REG_U8_POSITION					SMIAPP_REG_MK_U8(0x0d8a)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CONTROL			SMIAPP_REG_MK_U8(0x0e00)
+#define SMIAPP_REG_U8_BRACKETING_LUT_MODE			SMIAPP_REG_MK_U8(0x0e01)
+#define SMIAPP_REG_U8_BRACKETING_LUT_ENTRY_CONTROL		SMIAPP_REG_MK_U8(0x0e02)
+#define SMIAPP_REG_U8_LUT_PARAMETERS_START			SMIAPP_REG_MK_U8(0x0e10)
+#define SMIAPP_REG_U8_LUT_PARAMETERS_END			SMIAPP_REG_MK_U8(0x0eff)
+#define SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY		SMIAPP_REG_MK_U16(0x1000)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1004)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN	SMIAPP_REG_MK_U16(0x1006)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1008)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN		SMIAPP_REG_MK_U16(0x100a)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x1080)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_MIN				SMIAPP_REG_MK_U16(0x1084)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_MAX				SMIAPP_REG_MK_U16(0x1086)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_STEP_SIZE			SMIAPP_REG_MK_U16(0x1088)
+#define SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1100)
+#define SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1104)
+#define SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x1108)
+#define SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x110a)
+#define SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x110c)
+#define SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1110)
+#define SMIAPP_REG_U16_MIN_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1114)
+#define SMIAPP_REG_U16_MAX_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1116)
+#define SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1118)
+#define SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x111c)
+#define SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1120)
+#define SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1122)
+#define SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1124)
+#define SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1128)
+#define SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x112c)
+#define SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1130)
+#define SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1134)
+#define SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1136)
+#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1140)
+#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1142)
+#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1144)
+#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1146)
+#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK			SMIAPP_REG_MK_U16(0x1148)
+#define SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES			SMIAPP_REG_MK_U16(0x114a)
+#define SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE		SMIAPP_REG_MK_U8(0x114c)
+#define SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1160)
+#define SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1162)
+#define SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1164)
+#define SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1168)
+#define SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116c)
+#define SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116e)
+#define SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1170)
+#define SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1174)
+#define SMIAPP_REG_U16_X_ADDR_MIN				SMIAPP_REG_MK_U16(0x1180)
+#define SMIAPP_REG_U16_Y_ADDR_MIN				SMIAPP_REG_MK_U16(0x1182)
+#define SMIAPP_REG_U16_X_ADDR_MAX				SMIAPP_REG_MK_U16(0x1184)
+#define SMIAPP_REG_U16_Y_ADDR_MAX				SMIAPP_REG_MK_U16(0x1186)
+#define SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x1188)
+#define SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118a)
+#define SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118c)
+#define SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118e)
+#define SMIAPP_REG_U16_MIN_EVEN_INC				SMIAPP_REG_MK_U16(0x11c0)
+#define SMIAPP_REG_U16_MAX_EVEN_INC				SMIAPP_REG_MK_U16(0x11c2)
+#define SMIAPP_REG_U16_MIN_ODD_INC				SMIAPP_REG_MK_U16(0x11c4)
+#define SMIAPP_REG_U16_MAX_ODD_INC				SMIAPP_REG_MK_U16(0x11c6)
+#define SMIAPP_REG_U16_SCALING_CAPABILITY			SMIAPP_REG_MK_U16(0x1200)
+#define SMIAPP_REG_U16_SCALER_M_MIN				SMIAPP_REG_MK_U16(0x1204)
+#define SMIAPP_REG_U16_SCALER_M_MAX				SMIAPP_REG_MK_U16(0x1206)
+#define SMIAPP_REG_U16_SCALER_N_MIN				SMIAPP_REG_MK_U16(0x1208)
+#define SMIAPP_REG_U16_SCALER_N_MAX				SMIAPP_REG_MK_U16(0x120a)
+#define SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY		SMIAPP_REG_MK_U16(0x120c)
+#define SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY			SMIAPP_REG_MK_U8(0x120e)
+#define SMIAPP_REG_U16_COMPRESSION_CAPABILITY			SMIAPP_REG_MK_U16(0x1300)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINRED			SMIAPP_REG_MK_U16(0x1400)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINRED		SMIAPP_REG_MK_U16(0x1402)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINRED			SMIAPP_REG_MK_U16(0x1404)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINGREEN		SMIAPP_REG_MK_U16(0x1406)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINGREEN		SMIAPP_REG_MK_U16(0x1408)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINGREEN		SMIAPP_REG_MK_U16(0x140a)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINBLUE			SMIAPP_REG_MK_U16(0x140c)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINBLUE		SMIAPP_REG_MK_U16(0x140e)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINBLUE		SMIAPP_REG_MK_U16(0x1410)
+#define SMIAPP_REG_U16_FIFO_SIZE_PIXELS				SMIAPP_REG_MK_U16(0x1500)
+#define SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY			SMIAPP_REG_MK_U8(0x1502)
+#define SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY			SMIAPP_REG_MK_U8(0x1600)
+#define SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1601)
+#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x1602)
+#define SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY			SMIAPP_REG_MK_U8(0x1603)
+#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY		SMIAPP_REG_MK_U8(0x1604)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1608)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x160c)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1610)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1614)
+#define SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1618)
+#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1700)
+#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1702)
+#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1704)
+#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1706)
+#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN		SMIAPP_REG_MK_U16(0x1708)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN		SMIAPP_REG_MK_U16(0x170a)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	SMIAPP_REG_MK_U16(0x170c)
+#define SMIAPP_REG_U8_BINNING_CAPABILITY			SMIAPP_REG_MK_U8(0x1710)
+#define SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY		SMIAPP_REG_MK_U8(0x1711)
+#define SMIAPP_REG_U8_BINNING_SUBTYPES				SMIAPP_REG_MK_U8(0x1712)
+#define SMIAPP_REG_U8_BINNING_TYPE_n(n)				SMIAPP_REG_MK_U8(0x1713 + (n)) /* 1 <= n <= 237 */
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY		SMIAPP_REG_MK_U8(0x1800)
+#define SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U8(0x1900)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY		SMIAPP_REG_MK_U8(0x1901)
+#define SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY			SMIAPP_REG_MK_U8(0x1902)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY	SMIAPP_REG_MK_U8(0x1903)
+#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U16(0x1904)
+#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2		SMIAPP_REG_MK_U16(0x1906)
+#define SMIAPP_REG_U8_EDOF_CAPABILITY				SMIAPP_REG_MK_U8(0x1980)
+#define SMIAPP_REG_U8_ESTIMATION_FRAMES				SMIAPP_REG_MK_U8(0x1981)
+#define SMIAPP_REG_U8_SUPPORTS_SHARPNESS_ADJ			SMIAPP_REG_MK_U8(0x1982)
+#define SMIAPP_REG_U8_SUPPORTS_DENOISING_ADJ			SMIAPP_REG_MK_U8(0x1983)
+#define SMIAPP_REG_U8_SUPPORTS_MODULE_SPECIFIC_ADJ		SMIAPP_REG_MK_U8(0x1984)
+#define SMIAPP_REG_U8_SUPPORTS_DEPTH_OF_FIELD_ADJ		SMIAPP_REG_MK_U8(0x1985)
+#define SMIAPP_REG_U8_SUPPORTS_FOCUS_DISTANCE_ADJ		SMIAPP_REG_MK_U8(0x1986)
+#define SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY		SMIAPP_REG_MK_U8(0x1987)
+#define SMIAPP_REG_U8_EDOF_SUPPORT_AB_NXM			SMIAPP_REG_MK_U8(0x1988)
+#define SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c0)
+#define SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c1)
+#define SMIAPP_REG_U16_EST_DEPTH_OF_FIELD			SMIAPP_REG_MK_U16(0x19c2)
+#define SMIAPP_REG_U16_EST_FOCUS_DISTANCE			SMIAPP_REG_MK_U16(0x19c4)
+#define SMIAPP_REG_U16_CAPABILITY_TRDY_MIN			SMIAPP_REG_MK_U16(0x1a00)
+#define SMIAPP_REG_U8_FLASH_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1a02)
+#define SMIAPP_REG_U16_MECH_SHUT_AND_ACT_START_ADDR		SMIAPP_REG_MK_U16(0x1b02)
+#define SMIAPP_REG_U8_ACTUATOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1b04)
+#define SMIAPP_REG_U16_ACTUATOR_TYPE				SMIAPP_REG_MK_U16(0x1b40)
+#define SMIAPP_REG_U8_AF_DEVICE_ADDRESS				SMIAPP_REG_MK_U8(0x1b42)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_ADDRESS			SMIAPP_REG_MK_U16(0x1b44)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1		SMIAPP_REG_MK_U8(0x1c00)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2		SMIAPP_REG_MK_U8(0x1c01)
+#define SMIAPP_REG_U8_BRACKETING_LUT_SIZE			SMIAPP_REG_MK_U8(0x1c02)
diff --git a/drivers/media/video/smiapp/smiapp-reg.h b/drivers/media/video/smiapp/smiapp-reg.h
new file mode 100644
index 0000000..d0167aa
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-reg.h
@@ -0,0 +1,122 @@
+/*
+ * drivers/media/video/smiapp/smiapp-reg.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_REG_H_
+#define __SMIAPP_REG_H_
+
+#include "smiapp-reg-defs.h"
+
+/* Bits for above register */
+#define SMIAPP_IMAGE_ORIENTATION_HFLIP		(1 << 0)
+#define SMIAPP_IMAGE_ORIENTATION_VFLIP		(1 << 1)
+
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN		(1 << 0)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN		(0 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN		(1 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR	(1 << 2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY	(1 << 0)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY	(1 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA		(1 << 2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE		(1 << 3)
+
+#define SMIAPP_SOFTWARE_RESET				(1 << 0)
+
+#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE	(1 << 0)
+#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE	(1 << 1)
+
+#define SMIAPP_DPHY_CTRL_AUTOMATIC			0
+/* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */
+#define SMIAPP_DPHY_CTRL_UI				1
+#define SMIAPP_DPHY_CTRL_REGISTER			2
+
+#define SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR	1
+#define SMIAPP_COMPRESSION_MODE_ADVANCED_PREDICTOR	2
+
+#define SMIAPP_MODE_SELECT_SOFTWARE_STANDBY		0
+#define SMIAPP_MODE_SELECT_STREAMING			1
+
+#define SMIAPP_SCALING_MODE_NONE			0
+#define SMIAPP_SCALING_MODE_HORIZONTAL			1
+#define SMIAPP_SCALING_MODE_BOTH			2
+
+#define SMIAPP_SCALING_CAPABILITY_NONE			0
+#define SMIAPP_SCALING_CAPABILITY_HORIZONTAL		1
+#define SMIAPP_SCALING_CAPABILITY_BOTH			2 /* horizontal/both */
+
+/* digital crop right before scaler */
+#define SMIAPP_DIGITAL_CROP_CAPABILITY_NONE		0
+#define SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP	1
+
+#define SMIAPP_BINNING_CAPABILITY_NO			0
+#define SMIAPP_BINNING_CAPABILITY_YES			1
+
+/* Maximum number of binning subtypes */
+#define SMIAPP_BINNING_SUBTYPES				253
+
+#define SMIAPP_PIXEL_ORDER_GRBG				0
+#define SMIAPP_PIXEL_ORDER_RGGB				1
+#define SMIAPP_PIXEL_ORDER_BGGR				2
+#define SMIAPP_PIXEL_ORDER_GBRG				3
+
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL		1
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED		2
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N		8
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N	16
+
+#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE		0x01
+#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE		0x02
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK	0x0f
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK	0xf0
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT	4
+
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK	0xf000
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT	12
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK		0x0fff
+
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK	0xf0000000
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT	28
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK		0x0000ffff
+
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED	1
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY	2
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK	3
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK		4
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE	5
+
+#define SMIAPP_FAST_STANDBY_CTRL_COMPLETE_FRAMES	0
+#define SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE		1
+
+/* Scaling N factor */
+#define SMIAPP_SCALE_N					16
+
+/* Image statistics registers */
+/* Registers 0x2000 to 0x2fff are reserved for future
+ * use for statistics features.
+ */
+
+/* Manufacturer Specific Registers: 0x3000 to 0x3fff
+ * The manufacturer specifies these as a black box.
+ */
+
+#endif /* __SMIAPP_REG_H_ */
diff --git a/drivers/media/video/smiapp/smiapp-regs.c b/drivers/media/video/smiapp/smiapp-regs.c
new file mode 100644
index 0000000..4851ff7
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-regs.c
@@ -0,0 +1,213 @@
+/*
+ * drivers/media/video/smiapp/smiapp-regs.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+
+#include "smiapp-regs.h"
+
+static uint32_t float_to_u32_mul_1000000(struct i2c_client *client,
+					 uint32_t phloat)
+{
+	int32_t exp;
+	uint64_t man;
+
+	if (phloat >= 0x80000000) {
+		dev_err(&client->dev, "this is a negative number\n");
+		return 0;
+	}
+
+	if (phloat == 0x7f800000)
+		return ~0; /* Inf. */
+
+	if ((phloat & 0x7f800000) == 0x7f800000) {
+		dev_err(&client->dev, "NaN or other special number\n");
+		return 0;
+	}
+
+	/* Valid cases begin here */
+	if (phloat == 0)
+		return 0; /* Valid zero */
+
+	if (phloat > 0x4f800000)
+		return ~0; /* larger than 4294967295 */
+
+	/*
+	 * Unbias exponent (note how phloat is now guaranteed to
+	 * have 0 in the high bit)
+	 */
+	exp = ((int32_t)phloat >> 23) - 127;
+
+	/* Extract mantissa, add missing '1' bit and it's in MHz */
+	man = ((phloat & 0x7fffff) | 0x800000) * 1000000ULL;
+
+	if (exp < 0)
+		man >>= -exp;
+	else
+		man <<= exp;
+
+	man >>= 23; /* Remove mantissa bias */
+
+	return man & 0xffffffff;
+}
+
+
+/*
+ * Read a 8/16/32-bit i2c register.  The value is returned in 'val'.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+int smiapp_read(struct i2c_client *client, u32 reg, u32 *val)
+{
+	struct i2c_msg msg;
+	unsigned char data[4];
+	unsigned int len = (u8)(reg >> 16);
+	u16 offset = reg;
+	int r;
+
+	if (len != SMIA_REG_8BIT && len != SMIA_REG_16BIT
+	    && len != SMIA_REG_32BIT)
+		return -EINVAL;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = data;
+
+	/* high byte goes out first */
+	data[0] = (u8) (offset >> 8);
+	data[1] = (u8) offset;
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		if (r >= 0)
+			r = -EBUSY;
+		goto err;
+	}
+
+	msg.len = len;
+	msg.flags = I2C_M_RD;
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		if (r >= 0)
+			r = -EBUSY;
+		goto err;
+	}
+
+	*val = 0;
+	/* high byte comes first */
+	switch (len) {
+	case SMIA_REG_32BIT:
+		*val = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) +
+			data[3];
+		break;
+	case SMIA_REG_16BIT:
+		*val = (data[0] << 8) + data[1];
+		break;
+	case SMIA_REG_8BIT:
+		*val = data[0];
+		break;
+	default:
+		BUG();
+	}
+
+	if (reg & SMIA_REG_FLAG_FLOAT)
+		*val = float_to_u32_mul_1000000(client, *val);
+
+	return 0;
+
+err:
+	dev_err(&client->dev, "read from offset 0x%x error %d\n", offset, r);
+
+	return r;
+}
+
+/*
+ * Write to a 8/16-bit register.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+int smiapp_write(struct i2c_client *client, u32 reg, u32 val)
+{
+	struct i2c_msg msg;
+	unsigned char data[6];
+	unsigned int retries;
+	unsigned int flags = reg >> 24;
+	unsigned int len = (u8)(reg >> 16);
+	u16 offset = reg;
+	int r;
+
+	if ((len != SMIA_REG_8BIT && len != SMIA_REG_16BIT &&
+	     len != SMIA_REG_32BIT) || flags)
+		return -EINVAL;
+
+	msg.addr = client->addr;
+	msg.flags = 0; /* Write */
+	msg.len = 2 + len;
+	msg.buf = data;
+
+	/* high byte goes out first */
+	data[0] = (u8) (reg >> 8);
+	data[1] = (u8) (reg & 0xff);
+
+	switch (len) {
+	case SMIA_REG_8BIT:
+		data[2] = val;
+		break;
+	case SMIA_REG_16BIT:
+		data[2] = val >> 8;
+		data[3] = val;
+		break;
+	case SMIA_REG_32BIT:
+		data[2] = val >> 24;
+		data[3] = val >> 16;
+		data[4] = val >> 8;
+		data[5] = val;
+		break;
+	default:
+		BUG();
+	}
+
+	for (retries = 0; retries < 5; retries++) {
+		/*
+		 * Due to unknown reason sensor stops responding. This
+		 * loop is a temporaty solution until the root cause
+		 * is found.
+		 */
+		r = i2c_transfer(client->adapter, &msg, 1);
+		if (r == 1) {
+			if (retries)
+				dev_err(&client->dev,
+					"sensor i2c stall encountered. "
+					"retries: %d\n", retries);
+			return 0;
+		}
+
+		usleep_range(2000, 2000);
+	}
+
+	dev_err(&client->dev,
+		"wrote 0x%x to offset 0x%x error %d\n", val, offset, r);
+
+	return r;
+}
diff --git a/drivers/media/video/smiapp/smiapp-regs.h b/drivers/media/video/smiapp/smiapp-regs.h
new file mode 100644
index 0000000..58e8009
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-regs.h
@@ -0,0 +1,46 @@
+/*
+ * include/media/smiapp/smiapp-regs.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_REGS_H
+#define SMIAPP_REGS_H
+
+#include <linux/i2c.h>
+#include <linux/types.h>
+
+/* Use upper 8 bits of the type field for flags */
+#define SMIA_REG_FLAG_FLOAT		(1 << 24)
+
+#define SMIA_REG_8BIT			1
+#define SMIA_REG_16BIT			2
+#define SMIA_REG_32BIT			4
+struct smia_reg {
+	u16 type;
+	u16 reg;			/* 16-bit offset */
+	u32 val;			/* 8/16/32-bit value */
+};
+
+int smiapp_read(struct i2c_client *client, u32 reg, u32 *val);
+int smiapp_write(struct i2c_client *client, u32 reg, u32 val);
+
+#endif
diff --git a/drivers/media/video/smiapp/smiapp.h b/drivers/media/video/smiapp/smiapp.h
new file mode 100644
index 0000000..805d8c8
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp.h
@@ -0,0 +1,251 @@
+/*
+ * drivers/media/video/smiapp/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_PRIV_H_
+#define __SMIAPP_PRIV_H_
+
+#include <linux/mutex.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+#include <media/smiapp.h>
+
+#include "../smiapp-pll.h"
+#include "smiapp-reg.h"
+#include "smiapp-regs.h"
+#include "smiapp-quirk.h"
+
+/*
+ * Standard SMIA++ constants
+ */
+#define SMIA_VERSION_1			10
+#define SMIAPP_VERSION_0_8		8 /* Draft 0.8 */
+#define SMIAPP_VERSION_0_9		9 /* Draft 0.9 */
+#define SMIAPP_VERSION_1		10
+
+#define SMIAPP_PROFILE_0		0
+#define SMIAPP_PROFILE_1		1
+#define SMIAPP_PROFILE_2		2
+
+#define SMIAPP_NVM_PAGE_SIZE		64	/* bytes */
+
+#define SMIAPP_RESET_DELAY_CLOCKS	2400
+#define SMIAPP_RESET_DELAY(clk)				\
+	(1000 +	(SMIAPP_RESET_DELAY_CLOCKS * 1000	\
+		 + (clk) / 1000 - 1) / ((clk) / 1000))
+
+#include "smiapp-limits.h"
+
+struct smiapp_quirk;
+
+#define SMIAPP_MODULE_IDENT_FLAG_REV_LE		(1 << 0)
+
+struct smiapp_module_ident {
+	u8 manufacturer_id;
+	u16 model_id;
+	u8 revision_number_major;
+
+	u8 flags;
+
+	char *name;
+	const struct smiapp_quirk *quirk;
+};
+
+struct smiapp_module_info {
+	u32 manufacturer_id;
+	u32 model_id;
+	u32 revision_number_major;
+	u32 revision_number_minor;
+
+	u32 module_year;
+	u32 module_month;
+	u32 module_day;
+
+	u32 sensor_manufacturer_id;
+	u32 sensor_model_id;
+	u32 sensor_revision_number;
+	u32 sensor_firmware_version;
+
+	u32 smia_version;
+	u32 smiapp_version;
+
+	u32 smiapp_profile;
+
+	char *name;
+	const struct smiapp_quirk *quirk;
+};
+
+#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk)	\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = fl,							\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk)	\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT_L(manufacturer, model, rev, _name)			\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
+	  .name = _name, }
+
+#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk)		\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = 0,							\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT(manufacturer, model, rev, _name)			\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = 0,							\
+	  .name = _name, }
+
+struct smiapp_reg_limits {
+	u32 addr;
+	char *what;
+};
+
+extern struct smiapp_reg_limits smiapp_reg_limits[];
+
+struct smiapp_csi_data_format {
+	u32 code;
+	u8 width;
+	u8 compressed;
+	u8 pixel_order;
+};
+
+#define SMIAPP_SUBDEVS			3
+
+#define SMIAPP_PA_PAD_SRC		0
+#define SMIAPP_PAD_SINK			0
+#define SMIAPP_PAD_SRC			1
+#define SMIAPP_PADS			2
+
+struct smiapp_binning_subtype {
+	u8 horizontal:4;
+	u8 vertical:4;
+} __packed;
+
+struct smiapp_subdev {
+	struct v4l2_subdev sd;
+	struct media_pad pads[2];
+	struct v4l2_rect sink_fmt;
+	struct v4l2_rect crop[2];
+	struct v4l2_rect compose; /* compose on sink */
+	unsigned short sink_pad;
+	unsigned short source_pad;
+	int npads;
+	struct smiapp_sensor *sensor;
+	struct v4l2_ctrl_handler ctrl_handler;
+};
+
+/*
+ * struct smiapp_sensor - Main device structure
+ */
+struct smiapp_sensor {
+	/*
+	 * "mutex" is used to serialise access to all fields here
+	 * except v4l2_ctrls at the end of the struct. "mutex" is also
+	 * used to serialise access to file handle specific
+	 * information. The exception to this rule is the power_mutex
+	 * below.
+	 */
+	struct mutex mutex;
+	/*
+	 * power_mutex is used to serialise power management related
+	 * activities. Acquiring "mutex" at that time isn't necessary
+	 * since there are no other users anyway.
+	 */
+	struct mutex power_mutex;
+	struct smiapp_subdev ssds[SMIAPP_SUBDEVS];
+	u32 ssds_used;
+	struct smiapp_subdev *src;
+	struct smiapp_subdev *binner;
+	struct smiapp_subdev *scaler;
+	struct smiapp_subdev *pixel_array;
+	struct smiapp_platform_data *platform_data;
+	struct regulator *vana;
+	u32 limits[SMIAPP_LIMIT_LAST];
+	u8 nbinning_subtypes;
+	struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES];
+	u32 mbus_frame_fmts;
+	const struct smiapp_csi_data_format *csi_format;
+	const struct smiapp_csi_data_format *internal_csi_format;
+	u32 default_mbus_frame_fmts;
+	int default_pixel_order;
+
+	u8 binning_horizontal;
+	u8 binning_vertical;
+
+	u8 scale_m;
+	u8 scaling_mode;
+
+	u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */
+	u8 flash_capability;
+	u8 frame_skip;
+
+	int power_count;
+
+	bool streaming;
+	bool dev_init_done;
+
+	u8 *nvm;		/* nvm memory buffer */
+	unsigned int nvm_size;	/* bytes */
+
+	struct smiapp_module_info minfo;
+
+	struct smiapp_pll pll;
+
+	/* Pixel array controls */
+	struct v4l2_ctrl *analog_gain;
+	struct v4l2_ctrl *exposure;
+	struct v4l2_ctrl *hflip;
+	struct v4l2_ctrl *vflip;
+	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *pixel_rate_parray;
+	/* src controls */
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *pixel_rate_csi;
+};
+
+#define to_smiapp_subdev(_sd)				\
+	container_of(_sd, struct smiapp_subdev, sd)
+
+#define to_smiapp_sensor(_sd)	\
+	(to_smiapp_subdev(_sd)->sensor)
+
+#endif /* __SMIAPP_PRIV_H_ */
diff --git a/include/media/smiapp.h b/include/media/smiapp.h
new file mode 100644
index 0000000..a7877cd
--- /dev/null
+++ b/include/media/smiapp.h
@@ -0,0 +1,83 @@
+/*
+ * include/media/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_H_
+#define __SMIAPP_H_
+
+#include <media/v4l2-subdev.h>
+
+#define SMIAPP_NAME		"smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR	(0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR	(0x6e >> 1) /* Alternate I2C Address */
+
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK	0
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE	1
+#define SMIAPP_CSI_SIGNALLING_MODE_CSI2			2
+
+#define SMIAPP_NO_XSHUTDOWN	-1
+
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+	SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+	SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+	u8 mode;
+	u32 strobe_width_high_us;
+	u16 strobe_delay;
+	u16 stobe_start_point;
+	u8 trigger;
+};
+
+struct smiapp_platform_data {
+	/*
+	 * Change the cci address if i2c_addr_alt is set.
+	 * Both default and alternate cci addr need to be present
+	 */
+	unsigned short i2c_addr_dfl;	/* Default i2c addr */
+	unsigned short i2c_addr_alt;	/* Alternate i2c addr */
+
+	unsigned int nvm_size;			/* bytes */
+	unsigned int ext_clk;			/* sensor external clk */
+
+	unsigned int lanes;		/* Number of CSI-2 lanes */
+	u8 csi_signalling_mode;		/* SMIAPP_CSI_SIGNALLING_MODE_* */
+	const s64 *op_sys_clock;
+
+	enum smiapp_module_board_orient module_board_orient;
+
+	struct smiapp_flash_strobe_parms *strobe_setup;
+
+	int (*set_xclk)(struct v4l2_subdev *sd, int hz);
+	int xshutdown;			/* gpio or SMIAPP_NO_XSHUTDOWN */
+};
+
+#endif /* __SMIAPP_H_  */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.3 35/35] smiapp: Add driver
  2012-03-08 16:49         ` [PATCH v5.3 " Sakari Ailus
@ 2012-03-11 13:37           ` Laurent Pinchart
  2012-03-11 14:03             ` Sakari Ailus
  0 siblings, 1 reply; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-11 13:37 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

Thanks for the patch.

On Thursday 08 March 2012 18:49:43 Sakari Ailus wrote:
> Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
> three subdevs, pixel array, binner and scaler --- in case the device has a
> scaler.
> 
> Currently it relies on the board code for external clock handling. There is
> no fast way out of this dependency before the ISP drivers (omap3isp) among
> others will be able to export that clock through the clock framework
> instead.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

[snip]

> diff --git a/drivers/media/video/smiapp-pll.c
> b/drivers/media/video/smiapp-pll.c index be63bb4..326bd0e 100644
> --- a/drivers/media/video/smiapp-pll.c
> +++ b/drivers/media/video/smiapp-pll.c
> @@ -22,6 +22,8 @@
>   *
>   */
> 
> +#include "smiapp/smiapp-debug.h"
> +

Is this needed ?

>  #include <linux/gcd.h>
>  #include <linux/lcm.h>
>  #include <linux/module.h>

[snio]

> diff --git a/drivers/media/video/smiapp/smiapp-core.c
> b/drivers/media/video/smiapp/smiapp-core.c new file mode 100644
> index 0000000..68f4397
> --- /dev/null
> +++ b/drivers/media/video/smiapp/smiapp-core.c

[snip]

> +static int smiapp_set_format(struct v4l2_subdev *subdev,
> +			     struct v4l2_subdev_fh *fh,
> +			     struct v4l2_subdev_format *fmt)
> +{
> +	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
> +	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
> +	struct v4l2_rect *crops[SMIAPP_PADS];
> +	const struct smiapp_csi_data_format *csi_format;
> +
> +	mutex_lock(&sensor->mutex);
> +
> +	/*
> +	 * Media bus code is changeable on src subdev's source pad. On
> +	 * other source pads we just get format here.
> +	 */
> +	if (fmt->pad == ssd->source_pad) {
> +		int rval = __smiapp_get_format(subdev, fh, fmt);

This overwrites fmt completely, you won't be able to change it at all.

> +		if (!rval && subdev == &sensor->src->sd) {
> +			csi_format = smiapp_validate_csi_data_format(
> +				sensor, fmt->format.code);
> +			if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +				sensor->csi_format = csi_format;
> +			fmt->format.code = csi_format->code;
> +		}
> +
> +		mutex_unlock(&sensor->mutex);
> +		return rval;
> +	}
> +
> +	/* Sink pad. Width and height are changeable here. */
> +	fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
> +	fmt->format.width &= ~1;
> +	fmt->format.height &= ~1;
> +
> +	fmt->format.width =
> +		clamp(fmt->format.width,
> +		      sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
> +		      sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
> +	fmt->format.height =
> +		clamp(fmt->format.height,
> +		      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
> +		      sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
> +
> +	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
> +
> +	crops[ssd->sink_pad]->left = 0;
> +	crops[ssd->sink_pad]->top = 0;
> +	crops[ssd->sink_pad]->width = fmt->format.width;
> +	crops[ssd->sink_pad]->height = fmt->format.height;
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +		ssd->sink_fmt = *crops[ssd->sink_pad];
> +	smiapp_propagate(subdev, fh, fmt->which,
> +			 V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
> +
> +	mutex_unlock(&sensor->mutex);
> +
> +	return 0;
> +}

-- 
Regards,

Laurent Pinchart



^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.3 35/35] smiapp: Add driver
  2012-03-11 13:37           ` Laurent Pinchart
@ 2012-03-11 14:03             ` Sakari Ailus
  2012-03-11 14:45               ` [PATCH v5.4 " Sakari Ailus
  0 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-11 14:03 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Laurent,

Thanks for the comments!

Laurent Pinchart wrote:
> On Thursday 08 March 2012 18:49:43 Sakari Ailus wrote:
>> Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
>> three subdevs, pixel array, binner and scaler --- in case the device has a
>> scaler.
>>
>> Currently it relies on the board code for external clock handling. There is
>> no fast way out of this dependency before the ISP drivers (omap3isp) among
>> others will be able to export that clock through the clock framework
>> instead.
>>
>> Signed-off-by: Sakari Ailus<sakari.ailus@maxwell.research.nokia.com>
>
> [snip]
>
>> diff --git a/drivers/media/video/smiapp-pll.c
>> b/drivers/media/video/smiapp-pll.c index be63bb4..326bd0e 100644
>> --- a/drivers/media/video/smiapp-pll.c
>> +++ b/drivers/media/video/smiapp-pll.c
>> @@ -22,6 +22,8 @@
>>    *
>>    */
>>
>> +#include "smiapp/smiapp-debug.h"
>> +
>
> Is this needed ?

If debugging is enabled for SMIA++ driver the same is done for the PLL 
code. It's the only driver using the PLL code currently and I think it's 
an appropriate way to enable debug output.

I expect this to be changed in the future though.

What do you think? Would you only rely on dynamic printk?

>>   #include<linux/gcd.h>
>>   #include<linux/lcm.h>
>>   #include<linux/module.h>
>
> [snio]
>
>> diff --git a/drivers/media/video/smiapp/smiapp-core.c
>> b/drivers/media/video/smiapp/smiapp-core.c new file mode 100644
>> index 0000000..68f4397
>> --- /dev/null
>> +++ b/drivers/media/video/smiapp/smiapp-core.c
>
> [snip]
>
>> +static int smiapp_set_format(struct v4l2_subdev *subdev,
>> +			     struct v4l2_subdev_fh *fh,
>> +			     struct v4l2_subdev_format *fmt)
>> +{
>> +	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
>> +	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
>> +	struct v4l2_rect *crops[SMIAPP_PADS];
>> +	const struct smiapp_csi_data_format *csi_format;
>> +
>> +	mutex_lock(&sensor->mutex);
>> +
>> +	/*
>> +	 * Media bus code is changeable on src subdev's source pad. On
>> +	 * other source pads we just get format here.
>> +	 */
>> +	if (fmt->pad == ssd->source_pad) {
>> +		int rval = __smiapp_get_format(subdev, fh, fmt);
>
> This overwrites fmt completely, you won't be able to change it at all.

Good catch. I'll fix it and resend.

>> +		if (!rval&&  subdev ==&sensor->src->sd) {
>> +			csi_format = smiapp_validate_csi_data_format(
>> +				sensor, fmt->format.code);
>> +			if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
>> +				sensor->csi_format = csi_format;
>> +			fmt->format.code = csi_format->code;
>> +		}
>> +
>> +		mutex_unlock(&sensor->mutex);
>> +		return rval;
>> +	}
>> +
>> +	/* Sink pad. Width and height are changeable here. */
>> +	fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
>> +	fmt->format.width&= ~1;
>> +	fmt->format.height&= ~1;
>> +
>> +	fmt->format.width =
>> +		clamp(fmt->format.width,
>> +		      sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
>> +		      sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
>> +	fmt->format.height =
>> +		clamp(fmt->format.height,
>> +		      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
>> +		      sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
>> +
>> +	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
>> +
>> +	crops[ssd->sink_pad]->left = 0;
>> +	crops[ssd->sink_pad]->top = 0;
>> +	crops[ssd->sink_pad]->width = fmt->format.width;
>> +	crops[ssd->sink_pad]->height = fmt->format.height;
>> +	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
>> +		ssd->sink_fmt = *crops[ssd->sink_pad];
>> +	smiapp_propagate(subdev, fh, fmt->which,
>> +			 V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
>> +
>> +	mutex_unlock(&sensor->mutex);
>> +
>> +	return 0;
>> +}
>

Regards,

-- 
Sakari Ailus
sakari.ailus@iki.fi

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5.4 35/35] smiapp: Add driver
  2012-03-11 14:03             ` Sakari Ailus
@ 2012-03-11 14:45               ` Sakari Ailus
  2012-03-11 16:32                 ` Laurent Pinchart
  0 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-11 14:45 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
three subdevs, pixel array, binner and scaler --- in case the device has a
scaler.

Currently it relies on the board code for external clock handling. There is
no fast way out of this dependency before the ISP drivers (omap3isp) among
others will be able to export that clock through the clock framework
instead.

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
---
 drivers/media/video/Kconfig                  |    2 +
 drivers/media/video/Makefile                 |    1 +
 drivers/media/video/smiapp-pll.c             |    2 +
 drivers/media/video/smiapp/Kconfig           |   13 +
 drivers/media/video/smiapp/Makefile          |    3 +
 drivers/media/video/smiapp/smiapp-core.c     | 2832 ++++++++++++++++++++++++++
 drivers/media/video/smiapp/smiapp-debug.h    |   32 +
 drivers/media/video/smiapp/smiapp-limits.c   |  132 ++
 drivers/media/video/smiapp/smiapp-limits.h   |  128 ++
 drivers/media/video/smiapp/smiapp-quirk.c    |  264 +++
 drivers/media/video/smiapp/smiapp-quirk.h    |   72 +
 drivers/media/video/smiapp/smiapp-reg-defs.h |  503 +++++
 drivers/media/video/smiapp/smiapp-reg.h      |  122 ++
 drivers/media/video/smiapp/smiapp-regs.c     |  213 ++
 drivers/media/video/smiapp/smiapp-regs.h     |   46 +
 drivers/media/video/smiapp/smiapp.h          |  251 +++
 include/media/smiapp.h                       |   83 +
 17 files changed, 4699 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/smiapp/Kconfig
 create mode 100644 drivers/media/video/smiapp/Makefile
 create mode 100644 drivers/media/video/smiapp/smiapp-core.c
 create mode 100644 drivers/media/video/smiapp/smiapp-debug.h
 create mode 100644 drivers/media/video/smiapp/smiapp-limits.c
 create mode 100644 drivers/media/video/smiapp/smiapp-limits.h
 create mode 100644 drivers/media/video/smiapp/smiapp-quirk.c
 create mode 100644 drivers/media/video/smiapp/smiapp-quirk.h
 create mode 100644 drivers/media/video/smiapp/smiapp-reg-defs.h
 create mode 100644 drivers/media/video/smiapp/smiapp-reg.h
 create mode 100644 drivers/media/video/smiapp/smiapp-regs.c
 create mode 100644 drivers/media/video/smiapp/smiapp-regs.h
 create mode 100644 drivers/media/video/smiapp/smiapp.h
 create mode 100644 include/media/smiapp.h

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bb89f8c..6569b8e 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -527,6 +527,8 @@ config VIDEO_S5K6AA
 	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
 	  camera sensor with an embedded SoC image signal processor.
 
+source "drivers/media/video/smiapp/Kconfig"
+
 comment "Flash devices"
 
 config VIDEO_ADP1653
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index f184f1d..7b1393d 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
 obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
+obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp/
 obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
 
diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/video/smiapp-pll.c
index be63bb4..326bd0e 100644
--- a/drivers/media/video/smiapp-pll.c
+++ b/drivers/media/video/smiapp-pll.c
@@ -22,6 +22,8 @@
  *
  */
 
+#include "smiapp/smiapp-debug.h"
+
 #include <linux/gcd.h>
 #include <linux/lcm.h>
 #include <linux/module.h>
diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig
new file mode 100644
index 0000000..9504c43
--- /dev/null
+++ b/drivers/media/video/smiapp/Kconfig
@@ -0,0 +1,13 @@
+config VIDEO_SMIAPP
+	tristate "SMIA++/SMIA sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	select VIDEO_SMIAPP_PLL
+	---help---
+	  This is a generic driver for SMIA++/SMIA camera modules.
+
+config VIDEO_SMIAPP_DEBUG
+	bool "Enable debugging for the generic SMIA++/SMIA driver"
+	depends on VIDEO_SMIAPP
+	---help---
+	  Enable debugging output in the generic SMIA++/SMIA driver. If you
+	  are developing the driver you might want to enable this.
diff --git a/drivers/media/video/smiapp/Makefile b/drivers/media/video/smiapp/Makefile
new file mode 100644
index 0000000..5a207ee
--- /dev/null
+++ b/drivers/media/video/smiapp/Makefile
@@ -0,0 +1,3 @@
+smiapp-objs			+= smiapp-core.o smiapp-regs.o \
+				   smiapp-quirk.o smiapp-limits.o
+obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp.o
diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c
new file mode 100644
index 0000000..3991c45
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-core.c
@@ -0,0 +1,2832 @@
+/*
+ * drivers/media/video/smiapp/smiapp-core.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Based on smiapp driver by Vimarsh Zutshi
+ * Based on jt8ev1.c by Vimarsh Zutshi
+ * Based on smia-sensor.c by Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/v4l2-mediabus.h>
+#include <media/v4l2-device.h>
+
+#include "smiapp.h"
+
+#define SMIAPP_ALIGN_DIM(dim, flags)		\
+	((flags) & V4L2_SUBDEV_SEL_FLAG_SIZE_GE	\
+	 ? ALIGN((dim), 2)			\
+	 : (dim) & ~1)
+
+/*
+ * smiapp_module_idents - supported camera modules
+ */
+static const struct smiapp_module_ident smiapp_module_idents[] = {
+	SMIAPP_IDENT_L(0x01, 0x022b, -1, "vs6555"),
+	SMIAPP_IDENT_L(0x01, 0x022e, -1, "vw6558"),
+	SMIAPP_IDENT_L(0x07, 0x7698, -1, "ovm7698"),
+	SMIAPP_IDENT_L(0x0b, 0x4242, -1, "smiapp-003"),
+	SMIAPP_IDENT_L(0x0c, 0x208a, -1, "tcm8330md"),
+	SMIAPP_IDENT_LQ(0x0c, 0x2134, -1, "tcm8500md", &smiapp_tcm8500md_quirk),
+	SMIAPP_IDENT_L(0x0c, 0x213e, -1, "et8en2"),
+	SMIAPP_IDENT_L(0x0c, 0x2184, -1, "tcm8580md"),
+	SMIAPP_IDENT_LQ(0x0c, 0x560f, -1, "jt8ew9", &smiapp_jt8ew9_quirk),
+	SMIAPP_IDENT_LQ(0x10, 0x4141, -1, "jt8ev1", &smiapp_jt8ev1_quirk),
+	SMIAPP_IDENT_LQ(0x10, 0x4241, -1, "imx125es", &smiapp_imx125es_quirk),
+};
+
+/*
+ *
+ * Dynamic Capability Identification
+ *
+ */
+
+static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc;
+	unsigned int i;
+	int rval;
+	int line_count = 0;
+	int embedded_start = -1, embedded_end = -1;
+	int image_start = 0;
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE,
+			   &fmt_model_type);
+	if (rval)
+		return rval;
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE,
+			   &fmt_model_subtype);
+	if (rval)
+		return rval;
+
+	ncol_desc = (fmt_model_subtype
+		     & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK)
+		>> SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT;
+	nrow_desc = fmt_model_subtype
+		& SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK;
+
+	dev_dbg(&client->dev, "format_model_type %s\n",
+		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE
+		? "2 byte" :
+		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE
+		? "4 byte" : "is simply bad");
+
+	for (i = 0; i < ncol_desc + nrow_desc; i++) {
+		u32 desc;
+		u32 pixelcode;
+		u32 pixels;
+		char *which;
+		char *what;
+
+		if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i),
+				&desc);
+			if (rval)
+				return rval;
+
+			pixelcode =
+				(desc
+				 & SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK)
+				>> SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT;
+			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK;
+		} else if (fmt_model_type
+			   == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i),
+				&desc);
+			if (rval)
+				return rval;
+
+			pixelcode =
+				(desc
+				 & SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK)
+				>> SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT;
+			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK;
+		} else {
+			dev_dbg(&client->dev,
+				"invalid frame format model type %d\n",
+				fmt_model_type);
+			return -EINVAL;
+		}
+
+		if (i < ncol_desc)
+			which = "columns";
+		else
+			which = "rows";
+
+		switch (pixelcode) {
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED:
+			what = "embedded";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY:
+			what = "dummy";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK:
+			what = "black";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK:
+			what = "dark";
+			break;
+		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE:
+			what = "visible";
+			break;
+		default:
+			what = "invalid";
+			dev_dbg(&client->dev, "pixelcode %d\n", pixelcode);
+			break;
+		}
+
+		dev_dbg(&client->dev, "%s pixels: %d %s\n",
+			what, pixels, which);
+
+		if (i < ncol_desc)
+			continue;
+
+		/* Handle row descriptors */
+		if (pixelcode
+		    == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED) {
+			embedded_start = line_count;
+		} else {
+			if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE
+			    || pixels >= sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES] / 2)
+				image_start = line_count;
+			if (embedded_start != -1 && embedded_end == -1)
+				embedded_end = line_count;
+		}
+		line_count += pixels;
+	}
+
+	if (embedded_start == -1 || embedded_end == -1) {
+		embedded_start = 0;
+		embedded_end = 0;
+	}
+
+	dev_dbg(&client->dev, "embedded data from lines %d to %d\n",
+		embedded_start, embedded_end);
+	dev_dbg(&client->dev, "image data starts at line %d\n", image_start);
+
+	return 0;
+}
+
+static int smiapp_pll_configure(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_pll *pll = &sensor->pll;
+	int rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_VT_PIX_CLK_DIV, pll->vt_pix_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_VT_SYS_CLK_DIV, pll->vt_sys_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_PRE_PLL_CLK_DIV, pll->pre_pll_clk_div);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_PLL_MULTIPLIER, pll->pll_multiplier);
+	if (rval < 0)
+		return rval;
+
+	/* Lane op clock ratio does not apply here. */
+	rval = smiapp_write(
+		client, SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS,
+		DIV_ROUND_UP(pll->op_sys_clk_freq_hz, 1000000 / 256 / 256));
+	if (rval < 0 || sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
+		return rval;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_OP_PIX_CLK_DIV, pll->op_pix_clk_div);
+	if (rval < 0)
+		return rval;
+
+	return smiapp_write(
+		client, SMIAPP_REG_U16_OP_SYS_CLK_DIV, pll->op_sys_clk_div);
+}
+
+static int smiapp_pll_update(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_pll_limits lim = {
+		.min_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV],
+		.max_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV],
+		.min_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ],
+		.max_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ],
+		.min_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MIN_PLL_MULTIPLIER],
+		.max_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MAX_PLL_MULTIPLIER],
+		.min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ],
+		.max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ],
+
+		.min_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV],
+		.max_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV],
+		.min_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV],
+		.max_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV],
+		.min_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ],
+		.max_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ],
+		.min_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ],
+		.max_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ],
+
+		.min_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV],
+		.max_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV],
+		.min_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV],
+		.max_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV],
+		.min_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ],
+		.max_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ],
+		.min_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ],
+		.max_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ],
+
+		.min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN],
+		.min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK],
+	};
+	struct smiapp_pll *pll = &sensor->pll;
+	int rval;
+
+	memset(&sensor->pll, 0, sizeof(sensor->pll));
+
+	pll->lanes = sensor->platform_data->lanes;
+	pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
+
+	if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) {
+		/*
+		 * Fill in operational clock divisors limits from the
+		 * video timing ones. On profile 0 sensors the
+		 * requirements regarding them are essentially the
+		 * same as on VT ones.
+		 */
+		lim.min_op_sys_clk_div = lim.min_vt_sys_clk_div;
+		lim.max_op_sys_clk_div = lim.max_vt_sys_clk_div;
+		lim.min_op_pix_clk_div = lim.min_vt_pix_clk_div;
+		lim.max_op_pix_clk_div = lim.max_vt_pix_clk_div;
+		lim.min_op_sys_clk_freq_hz = lim.min_vt_sys_clk_freq_hz;
+		lim.max_op_sys_clk_freq_hz = lim.max_vt_sys_clk_freq_hz;
+		lim.min_op_pix_clk_freq_hz = lim.min_vt_pix_clk_freq_hz;
+		lim.max_op_pix_clk_freq_hz = lim.max_vt_pix_clk_freq_hz;
+		/* Profile 0 sensors have no separate OP clock branch. */
+		pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
+	}
+
+	if (smiapp_needs_quirk(sensor,
+			       SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE))
+		pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
+
+	pll->binning_horizontal = sensor->binning_horizontal;
+	pll->binning_vertical = sensor->binning_vertical;
+	pll->link_freq =
+		sensor->link_freq->qmenu_int[sensor->link_freq->val];
+	pll->scale_m = sensor->scale_m;
+	pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+	pll->bits_per_pixel = sensor->csi_format->compressed;
+
+	rval = smiapp_pll_calculate(&client->dev, &lim, pll);
+	if (rval < 0)
+		return rval;
+
+	sensor->pixel_rate_parray->cur.val64 = pll->vt_pix_clk_freq_hz;
+	sensor->pixel_rate_csi->cur.val64 = pll->pixel_rate_csi;
+
+	return 0;
+}
+
+
+/*
+ *
+ * V4L2 Controls handling
+ *
+ */
+
+static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor)
+{
+	struct v4l2_ctrl *ctrl = sensor->exposure;
+	int max;
+
+	max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+		+ sensor->vblank->val
+		- sensor->limits[SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN];
+
+	ctrl->maximum = max;
+	if (ctrl->default_value > max)
+		ctrl->default_value = max;
+	if (ctrl->val > max)
+		ctrl->val = max;
+	if (ctrl->cur.val > max)
+		ctrl->cur.val = max;
+}
+
+/*
+ * Order matters.
+ *
+ * 1. Bits-per-pixel, descending.
+ * 2. Bits-per-pixel compressed, descending.
+ * 3. Pixel order, same as in pixel_order_str. Formats for all four pixel
+ *    orders must be defined.
+ */
+static const struct smiapp_csi_data_format smiapp_csi_data_formats[] = {
+	{ V4L2_MBUS_FMT_SGRBG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GBRG, },
+	{ V4L2_MBUS_FMT_SGRBG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GBRG, },
+	{ V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GRBG, },
+	{ V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_RGGB, },
+	{ V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_BGGR, },
+	{ V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GBRG, },
+};
+
+const char *pixel_order_str[] = { "GRBG", "RGGB", "BGGR", "GBRG" };
+
+#define to_csi_format_idx(fmt) (((unsigned long)(fmt)			\
+				 - (unsigned long)smiapp_csi_data_formats) \
+				/ sizeof(*smiapp_csi_data_formats))
+
+static u32 smiapp_pixel_order(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int flip = 0;
+
+	if (sensor->hflip) {
+		if (sensor->hflip->val)
+			flip |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
+
+		if (sensor->vflip->val)
+			flip |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
+	}
+
+	flip ^= sensor->hvflip_inv_mask;
+
+	dev_dbg(&client->dev, "flip %d\n", flip);
+	return sensor->default_pixel_order ^ flip;
+}
+
+static void smiapp_update_mbus_formats(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int csi_format_idx =
+		to_csi_format_idx(sensor->csi_format) & ~3;
+	unsigned int internal_csi_format_idx =
+		to_csi_format_idx(sensor->internal_csi_format) & ~3;
+	unsigned int pixel_order = smiapp_pixel_order(sensor);
+
+	sensor->mbus_frame_fmts =
+		sensor->default_mbus_frame_fmts << pixel_order;
+	sensor->csi_format =
+		&smiapp_csi_data_formats[csi_format_idx + pixel_order];
+	sensor->internal_csi_format =
+		&smiapp_csi_data_formats[internal_csi_format_idx
+					 + pixel_order];
+
+	BUG_ON(max(internal_csi_format_idx, csi_format_idx) + pixel_order
+	       >= ARRAY_SIZE(smiapp_csi_data_formats));
+	BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0);
+
+	dev_dbg(&client->dev, "new pixel order %s\n",
+		pixel_order_str[pixel_order]);
+}
+
+static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct smiapp_sensor *sensor =
+		container_of(ctrl->handler, struct smiapp_subdev, ctrl_handler)
+			->sensor;
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 orient = 0;
+	int exposure;
+	int rval;
+
+	switch (ctrl->id) {
+	case V4L2_CID_ANALOGUE_GAIN:
+		return smiapp_write(
+			client,
+			SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL, ctrl->val);
+
+	case V4L2_CID_EXPOSURE:
+		return smiapp_write(
+			client,
+			SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val);
+
+	case V4L2_CID_HFLIP:
+	case V4L2_CID_VFLIP:
+		if (sensor->streaming)
+			return -EBUSY;
+
+		if (sensor->hflip->val)
+			orient |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
+
+		if (sensor->vflip->val)
+			orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
+
+		orient ^= sensor->hvflip_inv_mask;
+		rval = smiapp_write(client,
+				    SMIAPP_REG_U8_IMAGE_ORIENTATION,
+				    orient);
+		if (rval < 0)
+			return rval;
+
+		smiapp_update_mbus_formats(sensor);
+
+		return 0;
+
+	case V4L2_CID_VBLANK:
+		exposure = sensor->exposure->val;
+
+		__smiapp_update_exposure_limits(sensor);
+
+		if (exposure > sensor->exposure->maximum) {
+			sensor->exposure->val =
+				sensor->exposure->maximum;
+			rval = smiapp_set_ctrl(
+				sensor->exposure);
+			if (rval < 0)
+				return rval;
+		}
+
+		return smiapp_write(
+			client, SMIAPP_REG_U16_FRAME_LENGTH_LINES,
+			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+			+ ctrl->val);
+
+	case V4L2_CID_HBLANK:
+		return smiapp_write(
+			client, SMIAPP_REG_U16_LINE_LENGTH_PCK,
+			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
+			+ ctrl->val);
+
+	case V4L2_CID_LINK_FREQ:
+		if (sensor->streaming)
+			return -EBUSY;
+
+		return smiapp_pll_update(sensor);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct v4l2_ctrl_ops smiapp_ctrl_ops = {
+	.s_ctrl = smiapp_set_ctrl,
+};
+
+static int smiapp_init_controls(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct v4l2_ctrl_config cfg;
+	int rval;
+
+	rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 7);
+	if (rval)
+		return rval;
+	sensor->pixel_array->ctrl_handler.lock = &sensor->mutex;
+
+	sensor->analog_gain = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_ANALOGUE_GAIN,
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN],
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX],
+		max(sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP], 1U),
+		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN]);
+
+	/* Exposure limits will be updated soon, use just something here. */
+	sensor->exposure = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_EXPOSURE, 0, 0, 1, 0);
+
+	sensor->hflip = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_HFLIP, 0, 1, 1, 0);
+	sensor->vflip = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_VFLIP, 0, 1, 1, 0);
+
+	sensor->vblank = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_VBLANK, 0, 1, 1, 0);
+
+	if (sensor->vblank)
+		sensor->vblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
+	sensor->hblank = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_HBLANK, 0, 1, 1, 0);
+
+	if (sensor->hblank)
+		sensor->hblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
+	sensor->pixel_rate_parray = v4l2_ctrl_new_std(
+		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
+
+	if (sensor->pixel_array->ctrl_handler.error) {
+		dev_err(&client->dev,
+			"pixel array controls initialization failed (%d)\n",
+			sensor->pixel_array->ctrl_handler.error);
+		rval = sensor->pixel_array->ctrl_handler.error;
+		goto error;
+	}
+
+	sensor->pixel_array->sd.ctrl_handler =
+		&sensor->pixel_array->ctrl_handler;
+
+	v4l2_ctrl_cluster(2, &sensor->hflip);
+
+	rval = v4l2_ctrl_handler_init(&sensor->src->ctrl_handler, 0);
+	if (rval)
+		goto error;
+	sensor->src->ctrl_handler.lock = &sensor->mutex;
+
+	memset(&cfg, 0, sizeof(cfg));
+
+	cfg.ops = &smiapp_ctrl_ops;
+	cfg.id = V4L2_CID_LINK_FREQ;
+	cfg.type = V4L2_CTRL_TYPE_INTEGER_MENU;
+	while (sensor->platform_data->op_sys_clock[cfg.max + 1])
+		cfg.max++;
+	cfg.qmenu_int = sensor->platform_data->op_sys_clock;
+
+	sensor->link_freq = v4l2_ctrl_new_custom(
+		&sensor->src->ctrl_handler, &cfg, NULL);
+
+	sensor->pixel_rate_csi = v4l2_ctrl_new_std(
+		&sensor->src->ctrl_handler, &smiapp_ctrl_ops,
+		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
+
+	if (sensor->src->ctrl_handler.error) {
+		dev_err(&client->dev,
+			"src controls initialization failed (%d)\n",
+			sensor->src->ctrl_handler.error);
+		rval = sensor->src->ctrl_handler.error;
+		goto error;
+	}
+
+	sensor->src->sd.ctrl_handler =
+		&sensor->src->ctrl_handler;
+
+	return 0;
+
+error:
+	v4l2_ctrl_handler_free(&sensor->pixel_array->ctrl_handler);
+	v4l2_ctrl_handler_free(&sensor->src->ctrl_handler);
+
+	return rval;
+}
+
+static void smiapp_free_controls(struct smiapp_sensor *sensor)
+{
+	unsigned int i;
+
+	for (i = 0; i < sensor->ssds_used; i++)
+		v4l2_ctrl_handler_free(&sensor->ssds[i].ctrl_handler);
+}
+
+static int smiapp_get_limits(struct smiapp_sensor *sensor, int const *limit,
+			     unsigned int n)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int i;
+	u32 val;
+	int rval;
+
+	for (i = 0; i < n; i++) {
+		rval = smiapp_read(
+			client, smiapp_reg_limits[limit[i]].addr, &val);
+		if (rval)
+			return rval;
+		sensor->limits[limit[i]] = val;
+		dev_dbg(&client->dev, "0x%8.8x \"%s\" = %d, 0x%x\n",
+			smiapp_reg_limits[limit[i]].addr,
+			smiapp_reg_limits[limit[i]].what, val, val);
+	}
+
+	return 0;
+}
+
+static int smiapp_get_all_limits(struct smiapp_sensor *sensor)
+{
+	unsigned int i;
+	int rval;
+
+	for (i = 0; i < SMIAPP_LIMIT_LAST; i++) {
+		rval = smiapp_get_limits(sensor, &i, 1);
+		if (rval < 0)
+			return rval;
+	}
+
+	if (sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] == 0)
+		smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16);
+
+	return 0;
+}
+
+static int smiapp_get_limits_binning(struct smiapp_sensor *sensor)
+{
+	static u32 const limits[] = {
+		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN,
+		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN,
+		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN,
+		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN,
+		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN,
+	};
+	static u32 const limits_replace[] = {
+		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES,
+		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES,
+		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK,
+		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK,
+		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN,
+		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN,
+	};
+
+	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY] ==
+	    SMIAPP_BINNING_CAPABILITY_NO) {
+		unsigned int i;
+
+		for (i = 0; i < ARRAY_SIZE(limits); i++)
+			sensor->limits[limits[i]] =
+				sensor->limits[limits_replace[i]];
+
+		return 0;
+	}
+
+	return smiapp_get_limits(sensor, limits, ARRAY_SIZE(limits));
+}
+
+static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int type, n;
+	unsigned int i, pixel_order;
+	int rval;
+
+	rval = smiapp_read(
+		client, SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE, &type);
+	if (rval)
+		return rval;
+
+	dev_dbg(&client->dev, "data_format_model_type %d\n", type);
+
+	rval = smiapp_read(client, SMIAPP_REG_U8_PIXEL_ORDER,
+			   &pixel_order);
+	if (rval)
+		return rval;
+
+	if (pixel_order >= ARRAY_SIZE(pixel_order_str)) {
+		dev_dbg(&client->dev, "bad pixel order %d\n", pixel_order);
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->dev, "pixel order %d (%s)\n", pixel_order,
+		pixel_order_str[pixel_order]);
+
+	switch (type) {
+	case SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL:
+		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N;
+		break;
+	case SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED:
+		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sensor->default_pixel_order = pixel_order;
+	sensor->mbus_frame_fmts = 0;
+
+	for (i = 0; i < n; i++) {
+		unsigned int fmt, j;
+
+		rval = smiapp_read(
+			client,
+			SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(i), &fmt);
+		if (rval)
+			return rval;
+
+		dev_dbg(&client->dev, "bpp %d, compressed %d\n",
+			fmt >> 8, (u8)fmt);
+
+		for (j = 0; j < ARRAY_SIZE(smiapp_csi_data_formats); j++) {
+			const struct smiapp_csi_data_format *f =
+				&smiapp_csi_data_formats[j];
+
+			if (f->pixel_order != SMIAPP_PIXEL_ORDER_GRBG)
+				continue;
+
+			if (f->width != fmt >> 8 || f->compressed != (u8)fmt)
+				continue;
+
+			dev_dbg(&client->dev, "jolly good! %d\n", j);
+
+			sensor->default_mbus_frame_fmts |= 1 << j;
+			if (!sensor->csi_format) {
+				sensor->csi_format = f;
+				sensor->internal_csi_format = f;
+			}
+		}
+	}
+
+	if (!sensor->csi_format) {
+		dev_err(&client->dev, "no supported mbus code found\n");
+		return -EINVAL;
+	}
+
+	smiapp_update_mbus_formats(sensor);
+
+	return 0;
+}
+
+static void smiapp_update_blanking(struct smiapp_sensor *sensor)
+{
+	struct v4l2_ctrl *vblank = sensor->vblank;
+	struct v4l2_ctrl *hblank = sensor->hblank;
+
+	vblank->minimum =
+		max_t(int,
+		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES],
+		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] -
+		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height);
+	vblank->maximum =
+		sensor->limits[SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN] -
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height;
+
+	vblank->val = clamp_t(int, vblank->val,
+			      vblank->minimum, vblank->maximum);
+	vblank->default_value = vblank->minimum;
+	vblank->val = vblank->val;
+	vblank->cur.val = vblank->val;
+
+	hblank->minimum =
+		max_t(int,
+		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] -
+		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width,
+		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]);
+	hblank->maximum =
+		sensor->limits[SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN] -
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width;
+
+	hblank->val = clamp_t(int, hblank->val,
+			      hblank->minimum, hblank->maximum);
+	hblank->default_value = hblank->minimum;
+	hblank->val = hblank->val;
+	hblank->cur.val = hblank->val;
+
+	__smiapp_update_exposure_limits(sensor);
+}
+
+static int smiapp_update_mode(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int binning_mode;
+	int rval;
+
+	dev_dbg(&client->dev, "frame size: %dx%d\n",
+		sensor->src->crop[SMIAPP_PAD_SRC].width,
+		sensor->src->crop[SMIAPP_PAD_SRC].height);
+	dev_dbg(&client->dev, "csi format width: %d\n",
+		sensor->csi_format->width);
+
+	/* Binning has to be set up here; it affects limits */
+	if (sensor->binning_horizontal == 1 &&
+	    sensor->binning_vertical == 1) {
+		binning_mode = 0;
+	} else {
+		u8 binning_type =
+			(sensor->binning_horizontal << 4)
+			| sensor->binning_vertical;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U8_BINNING_TYPE, binning_type);
+		if (rval < 0)
+			return rval;
+
+		binning_mode = 1;
+	}
+	rval = smiapp_write(client, SMIAPP_REG_U8_BINNING_MODE, binning_mode);
+	if (rval < 0)
+		return rval;
+
+	/* Get updated limits due to binning */
+	rval = smiapp_get_limits_binning(sensor);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_pll_update(sensor);
+	if (rval < 0)
+		return rval;
+
+	/* Output from pixel array, including blanking */
+	smiapp_update_blanking(sensor);
+
+	dev_dbg(&client->dev, "vblank\t\t%d\n", sensor->vblank->val);
+	dev_dbg(&client->dev, "hblank\t\t%d\n", sensor->hblank->val);
+
+	dev_dbg(&client->dev, "real timeperframe\t100/%d\n",
+		sensor->pll.vt_pix_clk_freq_hz /
+		((sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
+		  + sensor->hblank->val) *
+		 (sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+		  + sensor->vblank->val) / 100));
+
+	return 0;
+}
+
+/*
+ *
+ * SMIA++ NVM handling
+ *
+ */
+static int smiapp_read_nvm(struct smiapp_sensor *sensor,
+			   unsigned char *nvm)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	u32 i, s, p, np, v;
+	int rval, rval2;
+
+	np = sensor->nvm_size / SMIAPP_NVM_PAGE_SIZE;
+	for (p = 0; p < np; p++) {
+		rval = smiapp_write(
+			client,
+			SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT, p);
+		if (rval)
+			goto out;
+
+		rval = smiapp_write(client,
+				    SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL,
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN |
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN);
+		if (rval)
+			goto out;
+
+		for (i = 0; i < 1000; i++) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s);
+
+			if (rval)
+				goto out;
+
+			if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY)
+				break;
+
+			if (--i == 0) {
+				rval = -ETIMEDOUT;
+				goto out;
+			}
+
+		}
+
+		for (i = 0; i < SMIAPP_NVM_PAGE_SIZE; i++) {
+			rval = smiapp_read(
+				client,
+				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 + i,
+				&v);
+			if (rval)
+				goto out;
+
+			*nvm++ = v;
+		}
+	}
+
+out:
+	rval2 = smiapp_write(client, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, 0);
+	if (rval < 0)
+		return rval;
+	else
+		return rval2;
+}
+
+/*
+ *
+ * SMIA++ CCI address control
+ *
+ */
+static int smiapp_change_cci_addr(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+	u32 val;
+
+	client->addr = sensor->platform_data->i2c_addr_dfl;
+
+	rval = smiapp_write(client,
+			    SMIAPP_REG_U8_CCI_ADDRESS_CONTROL,
+			    sensor->platform_data->i2c_addr_alt << 1);
+	if (rval)
+		return rval;
+
+	client->addr = sensor->platform_data->i2c_addr_alt;
+
+	/* verify addr change went ok */
+	rval = smiapp_read(client, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, &val);
+	if (rval)
+		return rval;
+
+	if (val != sensor->platform_data->i2c_addr_alt << 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ *
+ * SMIA++ Mode Control
+ *
+ */
+static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct smiapp_flash_strobe_parms *strobe_setup;
+	unsigned int ext_freq = sensor->platform_data->ext_clk;
+	u32 tmp;
+	u32 strobe_adjustment;
+	u32 strobe_width_high_rs;
+	int rval;
+
+	strobe_setup = sensor->platform_data->strobe_setup;
+
+	/*
+	 * How to calculate registers related to strobe length. Please
+	 * do not change, or if you do at least know what you're
+	 * doing. :-)
+	 *
+	 * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> 2010-10-25
+	 *
+	 * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl
+	 *	/ EXTCLK freq [Hz]) * flash_strobe_adjustment
+	 *
+	 * tFlash_strobe_width_ctrl E N, [1 - 0xffff]
+	 * flash_strobe_adjustment E N, [1 - 0xff]
+	 *
+	 * The formula above is written as below to keep it on one
+	 * line:
+	 *
+	 * l / 10^6 = w / e * a
+	 *
+	 * Let's mark w * a by x:
+	 *
+	 * x = w * a
+	 *
+	 * Thus, we get:
+	 *
+	 * x = l * e / 10^6
+	 *
+	 * The strobe width must be at least as long as requested,
+	 * thus rounding upwards is needed.
+	 *
+	 * x = (l * e + 10^6 - 1) / 10^6
+	 * -----------------------------
+	 *
+	 * Maximum possible accuracy is wanted at all times. Thus keep
+	 * a as small as possible.
+	 *
+	 * Calculate a, assuming maximum w, with rounding upwards:
+	 *
+	 * a = (x + (2^16 - 1) - 1) / (2^16 - 1)
+	 * -------------------------------------
+	 *
+	 * Thus, we also get w, with that a, with rounding upwards:
+	 *
+	 * w = (x + a - 1) / a
+	 * -------------------
+	 *
+	 * To get limits:
+	 *
+	 * x E [1, (2^16 - 1) * (2^8 - 1)]
+	 *
+	 * Substituting maximum x to the original formula (with rounding),
+	 * the maximum l is thus
+	 *
+	 * (2^16 - 1) * (2^8 - 1) * 10^6 = l * e + 10^6 - 1
+	 *
+	 * l = (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / e
+	 * --------------------------------------------------
+	 *
+	 * flash_strobe_length must be clamped between 1 and
+	 * (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / EXTCLK freq.
+	 *
+	 * Then,
+	 *
+	 * flash_strobe_adjustment = ((flash_strobe_length *
+	 *	EXTCLK freq + 10^6 - 1) / 10^6 + (2^16 - 1) - 1) / (2^16 - 1)
+	 *
+	 * tFlash_strobe_width_ctrl = ((flash_strobe_length *
+	 *	EXTCLK freq + 10^6 - 1) / 10^6 +
+	 *	flash_strobe_adjustment - 1) / flash_strobe_adjustment
+	 */
+	tmp = div_u64(1000000ULL * ((1 << 16) - 1) * ((1 << 8) - 1) -
+		      1000000 + 1, ext_freq);
+	strobe_setup->strobe_width_high_us =
+		clamp_t(u32, strobe_setup->strobe_width_high_us, 1, tmp);
+
+	tmp = div_u64(((u64)strobe_setup->strobe_width_high_us * (u64)ext_freq +
+			1000000 - 1), 1000000ULL);
+	strobe_adjustment = (tmp + (1 << 16) - 1 - 1) / ((1 << 16) - 1);
+	strobe_width_high_rs = (tmp + strobe_adjustment - 1) /
+				strobe_adjustment;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_MODE_RS,
+			    strobe_setup->mode);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT,
+			    strobe_adjustment);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL,
+		strobe_width_high_rs);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL,
+			    strobe_setup->strobe_delay);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_FLASH_STROBE_START_POINT,
+			    strobe_setup->stobe_start_point);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FLASH_TRIGGER_RS,
+			    strobe_setup->trigger);
+
+out:
+	sensor->platform_data->strobe_setup->trigger = 0;
+
+	return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * Power management
+ */
+
+static int smiapp_power_on(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	unsigned int sleep;
+	int rval;
+
+	rval = regulator_enable(sensor->vana);
+	if (rval) {
+		dev_err(&client->dev, "failed to enable vana regulator\n");
+		return rval;
+	}
+	usleep_range(1000, 1000);
+
+	rval = sensor->platform_data->set_xclk(&sensor->src->sd,
+					sensor->platform_data->ext_clk);
+	if (rval < 0) {
+		dev_dbg(&client->dev, "failed to set xclk\n");
+		goto out_xclk_fail;
+	}
+	usleep_range(1000, 1000);
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 1);
+
+	sleep = SMIAPP_RESET_DELAY(sensor->platform_data->ext_clk);
+	usleep_range(sleep, sleep);
+
+	/*
+	 * Failures to respond to the address change command have been noticed.
+	 * Those failures seem to be caused by the sensor requiring a longer
+	 * boot time than advertised. An additional 10ms delay seems to work
+	 * around the issue, but the SMIA++ I2C write retry hack makes the delay
+	 * unnecessary. The failures need to be investigated to find a proper
+	 * fix, and a delay will likely need to be added here if the I2C write
+	 * retry hack is reverted before the root cause of the boot time issue
+	 * is found.
+	 */
+
+	if (sensor->platform_data->i2c_addr_alt) {
+		rval = smiapp_change_cci_addr(sensor);
+		if (rval) {
+			dev_err(&client->dev, "cci address change error\n");
+			goto out_cci_addr_fail;
+		}
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_SOFTWARE_RESET,
+			    SMIAPP_SOFTWARE_RESET);
+	if (rval < 0) {
+		dev_err(&client->dev, "software reset failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	if (sensor->platform_data->i2c_addr_alt) {
+		rval = smiapp_change_cci_addr(sensor);
+		if (rval) {
+			dev_err(&client->dev, "cci address change error\n");
+			goto out_cci_addr_fail;
+		}
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_COMPRESSION_MODE,
+			    SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR);
+	if (rval) {
+		dev_err(&client->dev, "compression mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ,
+		sensor->platform_data->ext_clk / (1000000 / (1 << 8)));
+	if (rval) {
+		dev_err(&client->dev, "extclk frequency set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_CSI_LANE_MODE,
+			    sensor->platform_data->lanes - 1);
+	if (rval) {
+		dev_err(&client->dev, "csi lane mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_FAST_STANDBY_CTRL,
+			    SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE);
+	if (rval) {
+		dev_err(&client->dev, "fast standby set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_CSI_SIGNALLING_MODE,
+			    sensor->platform_data->csi_signalling_mode);
+	if (rval) {
+		dev_err(&client->dev, "csi signalling mode set failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	/* DPHY control done by sensor based on requested link rate */
+	rval = smiapp_write(client, SMIAPP_REG_U8_DPHY_CTRL,
+			    SMIAPP_DPHY_CTRL_UI);
+	if (rval < 0)
+		return rval;
+
+	rval = smiapp_call_quirk(sensor, post_poweron);
+	if (rval) {
+		dev_err(&client->dev, "post_poweron quirks failed\n");
+		goto out_cci_addr_fail;
+	}
+
+	/* Are we still initialising...? If yes, return here. */
+	if (!sensor->pixel_array)
+		return 0;
+
+	rval = v4l2_ctrl_handler_setup(
+		&sensor->pixel_array->ctrl_handler);
+	if (rval)
+		goto out_cci_addr_fail;
+
+	rval = v4l2_ctrl_handler_setup(&sensor->src->ctrl_handler);
+	if (rval)
+		goto out_cci_addr_fail;
+
+	mutex_lock(&sensor->mutex);
+	rval = smiapp_update_mode(sensor);
+	mutex_unlock(&sensor->mutex);
+	if (rval < 0)
+		goto out_cci_addr_fail;
+
+	return 0;
+
+out_cci_addr_fail:
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 0);
+	sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+
+out_xclk_fail:
+	regulator_disable(sensor->vana);
+	return rval;
+}
+
+static void smiapp_power_off(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	/*
+	 * Currently power/clock to lens are enable/disabled separately
+	 * but they are essentially the same signals. So if the sensor is
+	 * powered off while the lens is powered on the sensor does not
+	 * really see a power off and next time the cci address change
+	 * will fail. So do a soft reset explicitly here.
+	 */
+	if (sensor->platform_data->i2c_addr_alt)
+		smiapp_write(client,
+			     SMIAPP_REG_U8_SOFTWARE_RESET,
+			     SMIAPP_SOFTWARE_RESET);
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_set_value(sensor->platform_data->xshutdown, 0);
+	sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+	usleep_range(5000, 5000);
+	regulator_disable(sensor->vana);
+	sensor->streaming = 0;
+}
+
+static int smiapp_set_power(struct v4l2_subdev *subdev, int on)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ret = 0;
+
+	mutex_lock(&sensor->power_mutex);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0
+	 * to 0, update the power state.
+	 */
+	if (!sensor->power_count == !on)
+		goto out;
+
+	if (on) {
+		/* Power on and perform initialisation. */
+		ret = smiapp_power_on(sensor);
+		if (ret < 0)
+			goto out;
+	} else {
+		smiapp_power_off(sensor);
+	}
+
+	/* Update the power count. */
+	sensor->power_count += on ? 1 : -1;
+	WARN_ON(sensor->power_count < 0);
+
+out:
+	mutex_unlock(&sensor->power_mutex);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Video stream management
+ */
+
+static int smiapp_start_streaming(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_CSI_DATA_FORMAT,
+			    (sensor->csi_format->width << 8) |
+			    sensor->csi_format->compressed);
+	if (rval)
+		goto out;
+
+	rval = smiapp_pll_configure(sensor);
+	if (rval)
+		goto out;
+
+	/* Analog crop start coordinates */
+	rval = smiapp_write(client, SMIAPP_REG_U16_X_ADDR_START,
+			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(client, SMIAPP_REG_U16_Y_ADDR_START,
+			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top);
+	if (rval < 0)
+		goto out;
+
+	/* Analog crop end coordinates */
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_X_ADDR_END,
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left
+		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width - 1);
+	if (rval < 0)
+		goto out;
+
+	rval = smiapp_write(
+		client, SMIAPP_REG_U16_Y_ADDR_END,
+		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top
+		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height - 1);
+	if (rval < 0)
+		goto out;
+
+	/*
+	 * Output from pixel array, including blanking, is set using
+	 * controls below. No need to set here.
+	 */
+
+	/* Digital crop */
+	if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+	    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].left);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].top);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].width);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(
+			client, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT,
+			sensor->scaler->crop[SMIAPP_PAD_SINK].height);
+		if (rval < 0)
+			goto out;
+	}
+
+	/* Scaling */
+	if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+	    != SMIAPP_SCALING_CAPABILITY_NONE) {
+		rval = smiapp_write(client, SMIAPP_REG_U16_SCALING_MODE,
+				    sensor->scaling_mode);
+		if (rval < 0)
+			goto out;
+
+		rval = smiapp_write(client, SMIAPP_REG_U16_SCALE_M,
+				    sensor->scale_m);
+		if (rval < 0)
+			goto out;
+	}
+
+	/* Output size from sensor */
+	rval = smiapp_write(client, SMIAPP_REG_U16_X_OUTPUT_SIZE,
+			    sensor->src->crop[SMIAPP_PAD_SRC].width);
+	if (rval < 0)
+		goto out;
+	rval = smiapp_write(client, SMIAPP_REG_U16_Y_OUTPUT_SIZE,
+			    sensor->src->crop[SMIAPP_PAD_SRC].height);
+	if (rval < 0)
+		goto out;
+
+	if ((sensor->flash_capability &
+	     (SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE |
+	      SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) &&
+	    sensor->platform_data->strobe_setup != NULL &&
+	    sensor->platform_data->strobe_setup->trigger != 0) {
+		rval = smiapp_setup_flash_strobe(sensor);
+		if (rval)
+			goto out;
+	}
+
+	rval = smiapp_call_quirk(sensor, pre_streamon);
+	if (rval) {
+		dev_err(&client->dev, "pre_streamon quirks failed\n");
+		goto out;
+	}
+
+	rval = smiapp_write(client, SMIAPP_REG_U8_MODE_SELECT,
+			    SMIAPP_MODE_SELECT_STREAMING);
+
+out:
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static int smiapp_stop_streaming(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = smiapp_write(client, SMIAPP_REG_U8_MODE_SELECT,
+			    SMIAPP_MODE_SELECT_SOFTWARE_STANDBY);
+	if (rval)
+		goto out;
+
+	rval = smiapp_call_quirk(sensor, post_streamoff);
+	if (rval)
+		dev_err(&client->dev, "post_streamoff quirks failed\n");
+
+out:
+	mutex_unlock(&sensor->mutex);
+	return rval;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev video operations
+ */
+
+static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	if (sensor->streaming == enable)
+		return 0;
+
+	if (enable) {
+		sensor->streaming = 1;
+		rval = smiapp_start_streaming(sensor);
+		if (rval < 0)
+			sensor->streaming = 0;
+	} else {
+		rval = smiapp_stop_streaming(sensor);
+		sensor->streaming = 0;
+	}
+
+	return rval;
+}
+
+static int smiapp_enum_mbus_code(struct v4l2_subdev *subdev,
+				 struct v4l2_subdev_fh *fh,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int i;
+	int idx = -1;
+	int rval = -EINVAL;
+
+	mutex_lock(&sensor->mutex);
+
+	dev_err(&client->dev, "subdev %s, pad %d, index %d\n",
+		subdev->name, code->pad, code->index);
+
+	if (subdev != &sensor->src->sd || code->pad != SMIAPP_PAD_SRC) {
+		if (code->index)
+			goto out;
+
+		code->code = sensor->internal_csi_format->code;
+		rval = 0;
+		goto out;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+		if (sensor->mbus_frame_fmts & (1 << i))
+			idx++;
+
+		if (idx == code->index) {
+			code->code = smiapp_csi_data_formats[i].code;
+			dev_err(&client->dev, "found index %d, i %d, code %x\n",
+				code->index, i, code->code);
+			rval = 0;
+			break;
+		}
+	}
+
+out:
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static u32 __smiapp_get_mbus_code(struct v4l2_subdev *subdev,
+				  unsigned int pad)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	if (subdev == &sensor->src->sd && pad == SMIAPP_PAD_SRC)
+		return sensor->csi_format->code;
+	else
+		return sensor->internal_csi_format->code;
+}
+
+static int __smiapp_get_format(struct v4l2_subdev *subdev,
+			       struct v4l2_subdev_fh *fh,
+			       struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad);
+	} else {
+		struct v4l2_rect *r;
+
+		if (fmt->pad == ssd->source_pad)
+			r = &ssd->crop[ssd->source_pad];
+		else
+			r = &ssd->sink_fmt;
+
+		fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
+		fmt->format.width = r->width;
+		fmt->format.height = r->height;
+	}
+
+	return 0;
+}
+
+static int smiapp_get_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = __smiapp_get_format(subdev, fh, fmt);
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+
+static void smiapp_get_crop_compose(struct v4l2_subdev *subdev,
+				    struct v4l2_subdev_fh *fh,
+				    struct v4l2_rect **crops,
+				    struct v4l2_rect **comps, int which)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	unsigned int i;
+
+	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		if (crops)
+			for (i = 0; i < subdev->entity.num_pads; i++)
+				crops[i] = &ssd->crop[i];
+		if (comps)
+			*comps = &ssd->compose;
+	} else {
+		if (crops) {
+			for (i = 0; i < subdev->entity.num_pads; i++) {
+				crops[i] = v4l2_subdev_get_try_crop(fh, i);
+				BUG_ON(!crops[i]);
+			}
+		}
+		if (comps) {
+			*comps = v4l2_subdev_get_try_compose(fh,
+							     SMIAPP_PAD_SINK);
+			BUG_ON(!*comps);
+		}
+	}
+}
+
+/* Changes require propagation only on sink pad. */
+static void smiapp_propagate(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh, int which,
+			     int target)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, which);
+
+	switch (target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+		comp->width = crops[SMIAPP_PAD_SINK]->width;
+		comp->height = crops[SMIAPP_PAD_SINK]->height;
+		if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+			if (ssd == sensor->scaler) {
+				sensor->scale_m =
+					sensor->limits[
+						SMIAPP_LIMIT_SCALER_N_MIN];
+				sensor->scaling_mode =
+					SMIAPP_SCALING_MODE_NONE;
+			} else if (ssd == sensor->binner) {
+				sensor->binning_horizontal = 1;
+				sensor->binning_vertical = 1;
+			}
+		}
+		/* Fall through */
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		*crops[SMIAPP_PAD_SRC] = *comp;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static const struct smiapp_csi_data_format
+*smiapp_validate_csi_data_format(struct smiapp_sensor *sensor, u32 code)
+{
+	const struct smiapp_csi_data_format *csi_format = sensor->csi_format;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+		if (sensor->mbus_frame_fmts & (1 << i)
+		    && smiapp_csi_data_formats[i].code == code)
+			return &smiapp_csi_data_formats[i];
+	}
+
+	return csi_format;
+}
+
+static int smiapp_set_format(struct v4l2_subdev *subdev,
+			     struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *crops[SMIAPP_PADS];
+
+	mutex_lock(&sensor->mutex);
+
+	/*
+	 * Media bus code is changeable on src subdev's source pad. On
+	 * other source pads we just get format here.
+	 */
+	if (fmt->pad == ssd->source_pad) {
+		u32 code = fmt->format.code;
+		int rval = __smiapp_get_format(subdev, fh, fmt);
+
+		if (!rval && subdev == &sensor->src->sd) {
+			const struct smiapp_csi_data_format *csi_format =
+				smiapp_validate_csi_data_format(sensor, code);
+			if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+				sensor->csi_format = csi_format;
+			fmt->format.code = csi_format->code;
+		}
+
+		mutex_unlock(&sensor->mutex);
+		return rval;
+	}
+
+	/* Sink pad. Width and height are changeable here. */
+	fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
+	fmt->format.width &= ~1;
+	fmt->format.height &= ~1;
+
+	fmt->format.width =
+		clamp(fmt->format.width,
+		      sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
+		      sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
+	fmt->format.height =
+		clamp(fmt->format.height,
+		      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
+		      sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
+
+	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
+
+	crops[ssd->sink_pad]->left = 0;
+	crops[ssd->sink_pad]->top = 0;
+	crops[ssd->sink_pad]->width = fmt->format.width;
+	crops[ssd->sink_pad]->height = fmt->format.height;
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		ssd->sink_fmt = *crops[ssd->sink_pad];
+	smiapp_propagate(subdev, fh, fmt->which,
+			 V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
+
+	mutex_unlock(&sensor->mutex);
+
+	return 0;
+}
+
+/*
+ * Calculate goodness of scaled image size compared to expected image
+ * size and flags provided.
+ */
+#define SCALING_GOODNESS		100000
+#define SCALING_GOODNESS_EXTREME	100000000
+static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w,
+			    int h, int ask_h, u32 flags)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	int val = 0;
+
+	w &= ~1;
+	ask_w &= ~1;
+	h &= ~1;
+	ask_h &= ~1;
+
+	if (flags & V4L2_SUBDEV_SEL_FLAG_SIZE_GE) {
+		if (w < ask_w)
+			val -= SCALING_GOODNESS;
+		if (h < ask_h)
+			val -= SCALING_GOODNESS;
+	}
+
+	if (flags & V4L2_SUBDEV_SEL_FLAG_SIZE_LE) {
+		if (w > ask_w)
+			val -= SCALING_GOODNESS;
+		if (h > ask_h)
+			val -= SCALING_GOODNESS;
+	}
+
+	val -= abs(w - ask_w);
+	val -= abs(h - ask_h);
+
+	if (w < sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE])
+		val -= SCALING_GOODNESS_EXTREME;
+
+	dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n",
+		w, ask_h, h, ask_h, val);
+
+	return val;
+}
+
+static void smiapp_set_compose_binner(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_fh *fh,
+				      struct v4l2_subdev_selection *sel,
+				      struct v4l2_rect **crops,
+				      struct v4l2_rect *comp)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int i;
+	unsigned int binh = 1, binv = 1;
+	unsigned int best = scaling_goodness(
+		subdev,
+		crops[SMIAPP_PAD_SINK]->width, sel->r.width,
+		crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags);
+
+	for (i = 0; i < sensor->nbinning_subtypes; i++) {
+		int this = scaling_goodness(
+			subdev,
+			crops[SMIAPP_PAD_SINK]->width
+			/ sensor->binning_subtypes[i].horizontal,
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height
+			/ sensor->binning_subtypes[i].vertical,
+			sel->r.height, sel->flags);
+
+		if (this > best) {
+			binh = sensor->binning_subtypes[i].horizontal;
+			binv = sensor->binning_subtypes[i].vertical;
+			best = this;
+		}
+	}
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sensor->binning_vertical = binv;
+		sensor->binning_horizontal = binh;
+	}
+
+	sel->r.width = (crops[SMIAPP_PAD_SINK]->width / binh) & ~1;
+	sel->r.height = (crops[SMIAPP_PAD_SINK]->height / binv) & ~1;
+}
+
+/*
+ * Calculate best scaling ratio and mode for given output resolution.
+ *
+ * Try all of these: horizontal ratio, vertical ratio and smallest
+ * size possible (horizontally).
+ *
+ * Also try whether horizontal scaler or full scaler gives a better
+ * result.
+ */
+static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
+				      struct v4l2_subdev_fh *fh,
+				      struct v4l2_subdev_selection *sel,
+				      struct v4l2_rect **crops,
+				      struct v4l2_rect *comp)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	u32 min, max, a, b, max_m;
+	u32 scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+	int mode = SMIAPP_SCALING_MODE_HORIZONTAL;
+	u32 try[4];
+	u32 ntry = 0;
+	unsigned int i;
+	int best = INT_MIN;
+
+	sel->r.width = min_t(unsigned int, sel->r.width,
+			     crops[SMIAPP_PAD_SINK]->width);
+	sel->r.height = min_t(unsigned int, sel->r.height,
+			      crops[SMIAPP_PAD_SINK]->height);
+
+	a = crops[SMIAPP_PAD_SINK]->width
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.width;
+	b = crops[SMIAPP_PAD_SINK]->height
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.height;
+	max_m = crops[SMIAPP_PAD_SINK]->width
+		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]
+		/ sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE];
+
+	a = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		max(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	b = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		max(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	max_m = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
+		    max(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+
+	dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m);
+
+	min = min(max_m, min(a, b));
+	max = min(max_m, max(a, b));
+
+	try[ntry] = min;
+	ntry++;
+	if (min != max) {
+		try[ntry] = max;
+		ntry++;
+	}
+	if (max != max_m) {
+		try[ntry] = min + 1;
+		ntry++;
+		if (min != max) {
+			try[ntry] = max + 1;
+			ntry++;
+		}
+	}
+
+	for (i = 0; i < ntry; i++) {
+		int this = scaling_goodness(
+			subdev,
+			crops[SMIAPP_PAD_SINK]->width
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height,
+			sel->r.height,
+			sel->flags);
+
+		dev_dbg(&client->dev, "trying factor %d (%d)\n", try[i], i);
+
+		if (this > best) {
+			scale_m = try[i];
+			mode = SMIAPP_SCALING_MODE_HORIZONTAL;
+			best = this;
+		}
+
+		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
+			continue;
+
+		this = scaling_goodness(
+			subdev, crops[SMIAPP_PAD_SINK]->width
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.width,
+			crops[SMIAPP_PAD_SINK]->height
+			/ try[i]
+			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
+			sel->r.height,
+			sel->flags);
+
+		if (this > best) {
+			scale_m = try[i];
+			mode = SMIAPP_SCALING_MODE_BOTH;
+			best = this;
+		}
+	}
+
+	sel->r.width =
+		(crops[SMIAPP_PAD_SINK]->width
+		 / scale_m
+		 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) & ~1;
+	if (mode == SMIAPP_SCALING_MODE_BOTH)
+		sel->r.height =
+			(crops[SMIAPP_PAD_SINK]->height
+			 / scale_m
+			 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN])
+			& ~1;
+	else
+		sel->r.height = crops[SMIAPP_PAD_SINK]->height;
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sensor->scale_m = scale_m;
+		sensor->scaling_mode = mode;
+	}
+}
+/* We're only called on source pads. This function sets scaling. */
+static int smiapp_set_compose(struct v4l2_subdev *subdev,
+			      struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
+
+	sel->r.top = 0;
+	sel->r.left = 0;
+
+	if (ssd == sensor->binner)
+		smiapp_set_compose_binner(subdev, fh, sel, crops, comp);
+	else
+		smiapp_set_compose_scaler(subdev, fh, sel, crops, comp);
+
+	*comp = sel->r;
+	smiapp_propagate(subdev, fh, sel->which,
+			 V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		return smiapp_update_mode(sensor);
+
+	return 0;
+}
+
+static int __smiapp_sel_supported(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+
+	/* We only implement crop in three places. */
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS:
+		if (ssd == sensor->pixel_array
+		    && sel->pad == SMIAPP_PA_PAD_SRC)
+			return 0;
+		if (ssd == sensor->src
+		    && sel->pad == SMIAPP_PAD_SRC)
+			return 0;
+		if (ssd == sensor->scaler
+		    && sel->pad == SMIAPP_PAD_SINK
+		    && sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+		    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP)
+			return 0;
+		return -EINVAL;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
+		if (sel->pad == ssd->source_pad)
+			return -EINVAL;
+		if (ssd == sensor->binner)
+			return 0;
+		if (ssd == sensor->scaler
+		    && sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    != SMIAPP_SCALING_CAPABILITY_NONE)
+			return 0;
+		/* Fall through */
+	default:
+		return -EINVAL;
+	}
+}
+
+static int smiapp_set_crop(struct v4l2_subdev *subdev,
+			   struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *src_size, *crops[SMIAPP_PADS];
+	struct v4l2_rect _r;
+
+	smiapp_get_crop_compose(subdev, fh, crops, NULL, sel->which);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		if (sel->pad == ssd->sink_pad)
+			src_size = &ssd->sink_fmt;
+		else
+			src_size = &ssd->compose;
+	} else {
+		if (sel->pad == ssd->sink_pad) {
+			_r.left = 0;
+			_r.top = 0;
+			_r.width = v4l2_subdev_get_try_format(fh, sel->pad)
+				->width;
+			_r.height = v4l2_subdev_get_try_format(fh, sel->pad)
+				->height;
+			src_size = &_r;
+		} else {
+			src_size =
+				v4l2_subdev_get_try_compose(
+					fh, ssd->sink_pad);
+		}
+	}
+
+	if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) {
+		sel->r.left = 0;
+		sel->r.top = 0;
+	}
+
+	sel->r.width = min(sel->r.width, src_size->width);
+	sel->r.height = min(sel->r.height, src_size->height);
+
+	sel->r.left = min(sel->r.left, src_size->width - sel->r.width);
+	sel->r.top = min(sel->r.top, src_size->height - sel->r.height);
+
+	*crops[sel->pad] = sel->r;
+
+	if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK)
+		smiapp_propagate(subdev, fh, sel->which,
+				 V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL);
+
+	return 0;
+}
+
+static int __smiapp_get_selection(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
+	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
+	struct v4l2_rect sink_fmt;
+	int ret;
+
+	ret = __smiapp_sel_supported(subdev, sel);
+	if (ret)
+		return ret;
+
+	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		sink_fmt = ssd->sink_fmt;
+	} else {
+		struct v4l2_mbus_framefmt *fmt =
+			v4l2_subdev_get_try_format(fh, ssd->sink_pad);
+
+		sink_fmt.left = 0;
+		sink_fmt.top = 0;
+		sink_fmt.width = fmt->width;
+		sink_fmt.height = fmt->height;
+	}
+
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS:
+		if (ssd == sensor->pixel_array) {
+			sel->r.width =
+				sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+			sel->r.height =
+				sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		} else if (sel->pad == ssd->sink_pad) {
+			sel->r = sink_fmt;
+		} else {
+			sel->r = *comp;
+		}
+		break;
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
+		sel->r = *crops[sel->pad];
+		break;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		sel->r = *comp;
+		break;
+	}
+
+	return 0;
+}
+
+static int smiapp_get_selection(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	mutex_lock(&sensor->mutex);
+	rval = __smiapp_get_selection(subdev, fh, sel);
+	mutex_unlock(&sensor->mutex);
+
+	return rval;
+}
+static int smiapp_set_selection(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_selection *sel)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int ret;
+
+	ret = __smiapp_sel_supported(subdev, sel);
+	if (ret)
+		return ret;
+
+	mutex_lock(&sensor->mutex);
+
+	sel->r.left = max(0, sel->r.left & ~1);
+	sel->r.top = max(0, sel->r.top & ~1);
+	sel->r.width = max(0, SMIAPP_ALIGN_DIM(sel->r.width, sel->flags));
+	sel->r.height = max(0, SMIAPP_ALIGN_DIM(sel->r.height, sel->flags));
+
+	sel->r.width = max_t(unsigned int,
+			     sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
+			     sel->r.width);
+	sel->r.height = max_t(unsigned int,
+			      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
+			      sel->r.height);
+
+	switch (sel->target) {
+	case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL:
+		ret = smiapp_set_crop(subdev, fh, sel);
+		break;
+	case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL:
+		ret = smiapp_set_compose(subdev, fh, sel);
+		break;
+	default:
+		BUG();
+	}
+
+	mutex_unlock(&sensor->mutex);
+	return ret;
+}
+
+static int smiapp_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+
+	*frames = sensor->frame_skip;
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * sysfs attributes
+ */
+
+static ssize_t
+smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
+		      char *buf)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int nbytes;
+
+	if (!sensor->dev_init_done)
+		return -EBUSY;
+
+	if (!sensor->nvm_size) {
+		/* NVM not read yet - read it now */
+		sensor->nvm_size = sensor->platform_data->nvm_size;
+		if (smiapp_set_power(subdev, 1) < 0)
+			return -ENODEV;
+		if (smiapp_read_nvm(sensor, sensor->nvm)) {
+			dev_err(&client->dev, "nvm read failed\n");
+			return -ENODEV;
+		}
+		smiapp_set_power(subdev, 0);
+	}
+	/*
+	 * NVM is still way below a PAGE_SIZE, so we can safely
+	 * assume this for now.
+	 */
+	nbytes = min_t(unsigned int, sensor->nvm_size, PAGE_SIZE);
+	memcpy(buf, sensor->nvm, nbytes);
+
+	return nbytes;
+}
+static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL);
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev core operations
+ */
+
+static int smiapp_identify_module(struct v4l2_subdev *subdev)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_module_info *minfo = &sensor->minfo;
+	unsigned int i;
+	int rval = 0;
+
+	minfo->name = SMIAPP_NAME;
+
+	/* Module info */
+	rval = smiapp_read(client, SMIAPP_REG_U8_MANUFACTURER_ID,
+			   &minfo->manufacturer_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U16_MODEL_ID,
+				   &minfo->model_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_REVISION_NUMBER_MAJOR,
+				   &minfo->revision_number_major);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_REVISION_NUMBER_MINOR,
+				   &minfo->revision_number_minor);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_YEAR,
+				   &minfo->module_year);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_MONTH,
+				   &minfo->module_month);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_MODULE_DATE_DAY,
+				   &minfo->module_day);
+
+	/* Sensor info */
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID,
+				   &minfo->sensor_manufacturer_id);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U16_SENSOR_MODEL_ID,
+				   &minfo->sensor_model_id);
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_REVISION_NUMBER,
+				   &minfo->sensor_revision_number);
+	if (!rval)
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION,
+				   &minfo->sensor_firmware_version);
+
+	/* SMIA */
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_SMIA_VERSION,
+				   &minfo->smia_version);
+	if (!rval)
+		rval = smiapp_read(client, SMIAPP_REG_U8_SMIAPP_VERSION,
+				   &minfo->smiapp_version);
+
+	if (rval) {
+		dev_err(&client->dev, "sensor detection failed\n");
+		return -ENODEV;
+	}
+
+	dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n",
+		minfo->manufacturer_id, minfo->model_id);
+
+	dev_dbg(&client->dev,
+		"module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n",
+		minfo->revision_number_major, minfo->revision_number_minor,
+		minfo->module_year, minfo->module_month, minfo->module_day);
+
+	dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n",
+		minfo->sensor_manufacturer_id, minfo->sensor_model_id);
+
+	dev_dbg(&client->dev,
+		"sensor revision 0x%2.2x firmware version 0x%2.2x\n",
+		minfo->sensor_revision_number, minfo->sensor_firmware_version);
+
+	dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n",
+		minfo->smia_version, minfo->smiapp_version);
+
+	/*
+	 * Some modules have bad data in the lvalues below. Hope the
+	 * rvalues have better stuff. The lvalues are module
+	 * parameters whereas the rvalues are sensor parameters.
+	 */
+	if (!minfo->manufacturer_id && !minfo->model_id) {
+		minfo->manufacturer_id = minfo->sensor_manufacturer_id;
+		minfo->model_id = minfo->sensor_model_id;
+		minfo->revision_number_major = minfo->sensor_revision_number;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) {
+		if (smiapp_module_idents[i].manufacturer_id
+		    != minfo->manufacturer_id)
+			continue;
+		if (smiapp_module_idents[i].model_id != minfo->model_id)
+			continue;
+		if (smiapp_module_idents[i].flags
+		    & SMIAPP_MODULE_IDENT_FLAG_REV_LE) {
+			if (smiapp_module_idents[i].revision_number_major
+			    < minfo->revision_number_major)
+				continue;
+		} else {
+			if (smiapp_module_idents[i].revision_number_major
+			    != minfo->revision_number_major)
+				continue;
+		}
+
+		minfo->name = smiapp_module_idents[i].name;
+		minfo->quirk = smiapp_module_idents[i].quirk;
+		break;
+	}
+
+	if (i >= ARRAY_SIZE(smiapp_module_idents))
+		dev_warn(&client->dev,
+			 "no quirks for this module; let's hope it's fully compliant\n");
+
+	dev_dbg(&client->dev, "the sensor is called %s, ident %2.2x%4.4x%2.2x\n",
+		minfo->name, minfo->manufacturer_id, minfo->model_id,
+		minfo->revision_number_major);
+
+	strlcpy(subdev->name, sensor->minfo.name, sizeof(subdev->name));
+
+	return 0;
+}
+
+static const struct v4l2_subdev_ops smiapp_ops;
+static const struct v4l2_subdev_internal_ops smiapp_internal_ops;
+static const struct media_entity_operations smiapp_entity_ops;
+
+static int smiapp_registered(struct v4l2_subdev *subdev)
+{
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct smiapp_subdev *last = NULL;
+	u32 tmp;
+	unsigned int i;
+	int rval;
+
+	sensor->vana = regulator_get(&client->dev, "VANA");
+	if (IS_ERR(sensor->vana)) {
+		dev_err(&client->dev, "could not get regulator for vana\n");
+		return -ENODEV;
+	}
+
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) {
+		if (gpio_request_one(sensor->platform_data->xshutdown, 0,
+				     "SMIA++ xshutdown") != 0) {
+			dev_err(&client->dev,
+				"unable to acquire reset gpio %d\n",
+				sensor->platform_data->xshutdown);
+			rval = -ENODEV;
+			goto out_gpio_request;
+		}
+	}
+
+	rval = smiapp_power_on(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_smiapp_power_on;
+	}
+
+	rval = smiapp_identify_module(subdev);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	rval = smiapp_get_all_limits(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	/*
+	 * Handle Sensor Module orientation on the board.
+	 *
+	 * The application of H-FLIP and V-FLIP on the sensor is modified by
+	 * the sensor orientation on the board.
+	 *
+	 * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set
+	 * both H-FLIP and V-FLIP for normal operation which also implies
+	 * that a set/unset operation for user space HFLIP and VFLIP v4l2
+	 * controls will need to be internally inverted.
+	 *
+	 * Rotation also changes the bayer pattern.
+	 */
+	if (sensor->platform_data->module_board_orient ==
+	    SMIAPP_MODULE_BOARD_ORIENT_180)
+		sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP |
+					  SMIAPP_IMAGE_ORIENTATION_VFLIP;
+
+	rval = smiapp_get_mbus_formats(sensor);
+	if (rval) {
+		rval = -ENODEV;
+		goto out_power_off;
+	}
+
+	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) {
+		u32 val;
+
+		rval = smiapp_read(client,
+				   SMIAPP_REG_U8_BINNING_SUBTYPES, &val);
+		if (rval < 0) {
+			rval = -ENODEV;
+			goto out_power_off;
+		}
+		sensor->nbinning_subtypes = min_t(u8, val,
+						  SMIAPP_BINNING_SUBTYPES);
+
+		for (i = 0; i < sensor->nbinning_subtypes; i++) {
+			rval = smiapp_read(
+				client, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val);
+			if (rval < 0) {
+				rval = -ENODEV;
+				goto out_power_off;
+			}
+			sensor->binning_subtypes[i] =
+				*(struct smiapp_binning_subtype *)&val;
+
+			dev_dbg(&client->dev, "binning %xx%x\n",
+				sensor->binning_subtypes[i].horizontal,
+				sensor->binning_subtypes[i].vertical);
+		}
+	}
+	sensor->binning_horizontal = 1;
+	sensor->binning_vertical = 1;
+
+	/* SMIA++ NVM initialization - it will be read from the sensor
+	 * when it is first requested by userspace.
+	 */
+	if (sensor->minfo.smiapp_version && sensor->platform_data->nvm_size) {
+		sensor->nvm = kzalloc(sensor->platform_data->nvm_size,
+				      GFP_KERNEL);
+		if (sensor->nvm == NULL) {
+			dev_err(&client->dev, "nvm buf allocation failed\n");
+			rval = -ENOMEM;
+			goto out_power_off;
+		}
+
+		if (device_create_file(&client->dev, &dev_attr_nvm) != 0) {
+			dev_err(&client->dev, "sysfs nvm entry failed\n");
+			rval = -EBUSY;
+			goto out_power_off;
+		}
+	}
+
+	rval = smiapp_call_quirk(sensor, limits);
+	if (rval) {
+		dev_err(&client->dev, "limits quirks failed\n");
+		goto out_nvm_release;
+	}
+
+	/* We consider this as profile 0 sensor if any of these are zero. */
+	if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] ||
+	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) {
+		sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0;
+	} else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		   != SMIAPP_SCALING_CAPABILITY_NONE) {
+		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
+		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
+			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1;
+		else
+			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2;
+		sensor->scaler = &sensor->ssds[sensor->ssds_used];
+		sensor->ssds_used++;
+	} else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
+		   == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
+		sensor->scaler = &sensor->ssds[sensor->ssds_used];
+		sensor->ssds_used++;
+	}
+	sensor->binner = &sensor->ssds[sensor->ssds_used];
+	sensor->ssds_used++;
+	sensor->pixel_array = &sensor->ssds[sensor->ssds_used];
+	sensor->ssds_used++;
+
+	sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+
+	for (i = 0; i < SMIAPP_SUBDEVS; i++) {
+		struct {
+			struct smiapp_subdev *ssd;
+			char *name;
+		} const __this[] = {
+			{ sensor->scaler, "scaler", },
+			{ sensor->binner, "binner", },
+			{ sensor->pixel_array, "pixel array", },
+		}, *_this = &__this[i];
+		struct smiapp_subdev *this = _this->ssd;
+
+		if (!this)
+			continue;
+
+		if (this != sensor->src)
+			v4l2_subdev_init(&this->sd, &smiapp_ops);
+
+		this->sensor = sensor;
+
+		if (this == sensor->pixel_array) {
+			this->npads = 1;
+		} else {
+			this->npads = 2;
+			this->source_pad = 1;
+		}
+
+		snprintf(this->sd.name,
+			 sizeof(this->sd.name), "%s %s",
+			 sensor->minfo.name, _this->name);
+
+		this->sink_fmt.width =
+			sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+		this->sink_fmt.height =
+			sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		this->compose.width = this->sink_fmt.width;
+		this->compose.height = this->sink_fmt.height;
+		this->crop[this->source_pad] = this->compose;
+		this->pads[this->source_pad].flags = MEDIA_PAD_FL_SOURCE;
+		if (this != sensor->pixel_array) {
+			this->crop[this->sink_pad] = this->compose;
+			this->pads[this->sink_pad].flags = MEDIA_PAD_FL_SINK;
+		}
+
+		this->sd.entity.ops = &smiapp_entity_ops;
+
+		if (last == NULL) {
+			last = this;
+			continue;
+		}
+
+		this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+		this->sd.internal_ops = &smiapp_internal_ops;
+		this->sd.owner = NULL;
+		v4l2_set_subdevdata(&this->sd, client);
+
+		rval = media_entity_init(&this->sd.entity,
+					 this->npads, this->pads, 0);
+		if (rval) {
+			dev_err(&client->dev,
+				"media_entity_init failed\n");
+			goto out_nvm_release;
+		}
+
+		rval = media_entity_create_link(&this->sd.entity,
+						this->source_pad,
+						&last->sd.entity,
+						last->sink_pad,
+						MEDIA_LNK_FL_ENABLED |
+						MEDIA_LNK_FL_IMMUTABLE);
+		if (rval) {
+			dev_err(&client->dev,
+				"media_entity_create_link failed\n");
+			goto out_nvm_release;
+		}
+
+		rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev,
+						   &this->sd);
+		if (rval) {
+			dev_err(&client->dev,
+				"v4l2_device_register_subdev failed\n");
+			goto out_nvm_release;
+		}
+
+		last = this;
+	}
+
+	dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile);
+
+	sensor->pixel_array->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+
+	/* final steps */
+	smiapp_read_frame_fmt(sensor);
+	rval = smiapp_init_controls(sensor);
+	if (rval < 0)
+		goto out_nvm_release;
+
+	rval = smiapp_update_mode(sensor);
+	if (rval) {
+		dev_err(&client->dev, "update mode failed\n");
+		goto out_nvm_release;
+	}
+
+	sensor->streaming = false;
+	sensor->dev_init_done = true;
+
+	/* check flash capability */
+	rval = smiapp_read(client, SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, &tmp);
+	sensor->flash_capability = tmp;
+	if (rval)
+		goto out_nvm_release;
+
+	smiapp_power_off(sensor);
+
+	return 0;
+
+out_nvm_release:
+	device_remove_file(&client->dev, &dev_attr_nvm);
+
+out_power_off:
+	kfree(sensor->nvm);
+	sensor->nvm = NULL;
+	smiapp_power_off(sensor);
+
+out_smiapp_power_on:
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_free(sensor->platform_data->xshutdown);
+
+out_gpio_request:
+	regulator_put(sensor->vana);
+	sensor->vana = NULL;
+	return rval;
+}
+
+static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct smiapp_subdev *ssd = to_smiapp_subdev(sd);
+	struct smiapp_sensor *sensor = ssd->sensor;
+	u32 mbus_code =
+		smiapp_csi_data_formats[smiapp_pixel_order(sensor)].code;
+	unsigned int i;
+
+	mutex_lock(&sensor->mutex);
+
+	for (i = 0; i < ssd->npads; i++) {
+		struct v4l2_mbus_framefmt *try_fmt =
+			v4l2_subdev_get_try_format(fh, i);
+		struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(fh, i);
+		struct v4l2_rect *try_comp;
+
+		try_fmt->width = sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
+		try_fmt->height = sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
+		try_fmt->code = mbus_code;
+
+		try_crop->top = 0;
+		try_crop->left = 0;
+		try_crop->width = try_fmt->width;
+		try_crop->height = try_fmt->height;
+
+		if (ssd != sensor->pixel_array)
+			continue;
+
+		try_comp = v4l2_subdev_get_try_compose(fh, i);
+		*try_comp = *try_crop;
+	}
+
+	mutex_unlock(&sensor->mutex);
+
+	return smiapp_set_power(sd, 1);
+}
+
+static int smiapp_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	return smiapp_set_power(sd, 0);
+}
+
+static const struct v4l2_subdev_video_ops smiapp_video_ops = {
+	.s_stream = smiapp_set_stream,
+};
+
+static const struct v4l2_subdev_core_ops smiapp_core_ops = {
+	.s_power = smiapp_set_power,
+};
+
+static const struct v4l2_subdev_pad_ops smiapp_pad_ops = {
+	.enum_mbus_code = smiapp_enum_mbus_code,
+	.get_fmt = smiapp_get_format,
+	.set_fmt = smiapp_set_format,
+	.get_selection = smiapp_get_selection,
+	.set_selection = smiapp_set_selection,
+};
+
+static const struct v4l2_subdev_sensor_ops smiapp_sensor_ops = {
+	.g_skip_frames = smiapp_get_skip_frames,
+};
+
+static const struct v4l2_subdev_ops smiapp_ops = {
+	.core = &smiapp_core_ops,
+	.video = &smiapp_video_ops,
+	.pad = &smiapp_pad_ops,
+	.sensor = &smiapp_sensor_ops,
+};
+
+static const struct media_entity_operations smiapp_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = {
+	.registered = smiapp_registered,
+	.open = smiapp_open,
+	.close = smiapp_close,
+};
+
+static const struct v4l2_subdev_internal_ops smiapp_internal_ops = {
+	.open = smiapp_open,
+	.close = smiapp_close,
+};
+
+/* -----------------------------------------------------------------------------
+ * I2C Driver
+ */
+
+#ifdef CONFIG_PM
+
+static int smiapp_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	bool streaming;
+
+	BUG_ON(mutex_is_locked(&sensor->mutex));
+
+	if (sensor->power_count == 0)
+		return 0;
+
+	if (sensor->streaming)
+		smiapp_stop_streaming(sensor);
+
+	streaming = sensor->streaming;
+
+	smiapp_power_off(sensor);
+
+	/* save state for resume */
+	sensor->streaming = streaming;
+
+	return 0;
+}
+
+static int smiapp_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	int rval;
+
+	if (sensor->power_count == 0)
+		return 0;
+
+	rval = smiapp_power_on(sensor);
+	if (rval)
+		return rval;
+
+	if (sensor->streaming)
+		rval = smiapp_start_streaming(sensor);
+
+	return rval;
+}
+
+#else
+
+#define smiapp_suspend	NULL
+#define smiapp_resume	NULL
+
+#endif /* CONFIG_PM */
+
+static int smiapp_probe(struct i2c_client *client,
+			const struct i2c_device_id *devid)
+{
+	struct smiapp_sensor *sensor;
+	int rval;
+
+	if (client->dev.platform_data == NULL)
+		return -ENODEV;
+
+	sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
+	if (sensor == NULL)
+		return -ENOMEM;
+
+	sensor->platform_data = client->dev.platform_data;
+	mutex_init(&sensor->mutex);
+	mutex_init(&sensor->power_mutex);
+	sensor->src = &sensor->ssds[sensor->ssds_used];
+
+	v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops);
+	sensor->src->sd.internal_ops = &smiapp_internal_src_ops;
+	sensor->src->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sensor->src->sensor = sensor;
+
+	sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE;
+	rval = media_entity_init(&sensor->src->sd.entity, 2,
+				 sensor->src->pads, 0);
+	if (rval < 0)
+		kfree(sensor);
+
+	return rval;
+}
+
+static int __exit smiapp_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
+	unsigned int i;
+
+	if (sensor->power_count) {
+		if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+			gpio_set_value(sensor->platform_data->xshutdown, 0);
+		sensor->platform_data->set_xclk(&sensor->src->sd, 0);
+		sensor->power_count = 0;
+	}
+
+	if (sensor->nvm) {
+		device_remove_file(&client->dev, &dev_attr_nvm);
+		kfree(sensor->nvm);
+	}
+
+	for (i = 0; i < sensor->ssds_used; i++) {
+		media_entity_cleanup(&sensor->ssds[i].sd.entity);
+		v4l2_device_unregister_subdev(&sensor->ssds[i].sd);
+	}
+	smiapp_free_controls(sensor);
+	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
+		gpio_free(sensor->platform_data->xshutdown);
+	if (sensor->vana)
+		regulator_put(sensor->vana);
+
+	kfree(sensor);
+
+	return 0;
+}
+
+static const struct i2c_device_id smiapp_id_table[] = {
+	{ SMIAPP_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, smiapp_id_table);
+
+static const struct dev_pm_ops smiapp_pm_ops = {
+	.suspend	= smiapp_suspend,
+	.resume		= smiapp_resume,
+};
+
+static struct i2c_driver smiapp_i2c_driver = {
+	.driver	= {
+		.name = SMIAPP_NAME,
+		.pm = &smiapp_pm_ops,
+	},
+	.probe	= smiapp_probe,
+	.remove	= __exit_p(smiapp_remove),
+	.id_table = smiapp_id_table,
+};
+
+module_i2c_driver(smiapp_i2c_driver);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
+MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp/smiapp-debug.h b/drivers/media/video/smiapp/smiapp-debug.h
new file mode 100644
index 0000000..627809e
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-debug.h
@@ -0,0 +1,32 @@
+/*
+ * drivers/media/video/smiapp/smiapp-debug.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_DEBUG_H
+#define SMIAPP_DEBUG_H
+
+#ifdef CONFIG_VIDEO_SMIAPP_DEBUG
+#define DEBUG
+#endif
+
+#endif
diff --git a/drivers/media/video/smiapp/smiapp-limits.c b/drivers/media/video/smiapp/smiapp-limits.c
new file mode 100644
index 0000000..0800e09
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-limits.c
@@ -0,0 +1,132 @@
+/*
+ * drivers/media/video/smiapp/smiapp-limits.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp.h"
+
+struct smiapp_reg_limits smiapp_reg_limits[] = {
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY, "analogue_gain_capability" }, /* 0 */
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN, "analogue_gain_code_min" },
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX, "analogue_gain_code_max" },
+	{ SMIAPP_REG_U8_THS_ZERO_MIN, "ths_zero_min" },
+	{ SMIAPP_REG_U8_TCLK_TRAIL_MIN, "tclk_trail_min" },
+	{ SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY, "integration_time_capability" }, /* 5 */
+	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN, "coarse_integration_time_min" },
+	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN, "coarse_integration_time_max_margin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN, "fine_integration_time_min" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN, "fine_integration_time_max_margin" },
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY, "digital_gain_capability" }, /* 10 */
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_MIN, "digital_gain_min" },
+	{ SMIAPP_REG_U16_DIGITAL_GAIN_MAX, "digital_gain_max" },
+	{ SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ, "min_ext_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ, "max_ext_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV, "min_pre_pll_clk_div" }, /* 15 */
+	{ SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV, "max_pre_pll_clk_div" },
+	{ SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ, "min_pll_ip_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ, "max_pll_ip_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_PLL_MULTIPLIER, "min_pll_multiplier" },
+	{ SMIAPP_REG_U16_MAX_PLL_MULTIPLIER, "max_pll_multiplier" }, /* 20 */
+	{ SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ, "min_pll_op_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ, "max_pll_op_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV, "min_vt_sys_clk_div" },
+	{ SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV, "max_vt_sys_clk_div" },
+	{ SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ, "min_vt_sys_clk_freq_hz" }, /* 25 */
+	{ SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ, "max_vt_sys_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ, "min_vt_pix_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ, "max_vt_pix_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV, "min_vt_pix_clk_div" },
+	{ SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV, "max_vt_pix_clk_div" }, /* 30 */
+	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES, "min_frame_length_lines" },
+	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES, "max_frame_length_lines" },
+	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK, "min_line_length_pck" },
+	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK, "max_line_length_pck" },
+	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK, "min_line_blanking_pck" }, /* 35 */
+	{ SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES, "min_frame_blanking_lines" },
+	{ SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE, "min_line_length_pck_step_size" },
+	{ SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV, "min_op_sys_clk_div" },
+	{ SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV, "max_op_sys_clk_div" },
+	{ SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ, "min_op_sys_clk_freq_hz" }, /* 40 */
+	{ SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ, "max_op_sys_clk_freq_hz" },
+	{ SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV, "min_op_pix_clk_div" },
+	{ SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV, "max_op_pix_clk_div" },
+	{ SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ, "min_op_pix_clk_freq_hz" },
+	{ SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ, "max_op_pix_clk_freq_hz" }, /* 45 */
+	{ SMIAPP_REG_U16_X_ADDR_MIN, "x_addr_min" },
+	{ SMIAPP_REG_U16_Y_ADDR_MIN, "y_addr_min" },
+	{ SMIAPP_REG_U16_X_ADDR_MAX, "x_addr_max" },
+	{ SMIAPP_REG_U16_Y_ADDR_MAX, "y_addr_max" },
+	{ SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE, "min_x_output_size" }, /* 50 */
+	{ SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE, "min_y_output_size" },
+	{ SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE, "max_x_output_size" },
+	{ SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE, "max_y_output_size" },
+	{ SMIAPP_REG_U16_MIN_EVEN_INC, "min_even_inc" },
+	{ SMIAPP_REG_U16_MAX_EVEN_INC, "max_even_inc" }, /* 55 */
+	{ SMIAPP_REG_U16_MIN_ODD_INC, "min_odd_inc" },
+	{ SMIAPP_REG_U16_MAX_ODD_INC, "max_odd_inc" },
+	{ SMIAPP_REG_U16_SCALING_CAPABILITY, "scaling_capability" },
+	{ SMIAPP_REG_U16_SCALER_M_MIN, "scaler_m_min" },
+	{ SMIAPP_REG_U16_SCALER_M_MAX, "scaler_m_max" }, /* 60 */
+	{ SMIAPP_REG_U16_SCALER_N_MIN, "scaler_n_min" },
+	{ SMIAPP_REG_U16_SCALER_N_MAX, "scaler_n_max" },
+	{ SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY, "spatial_sampling_capability" },
+	{ SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY, "digital_crop_capability" },
+	{ SMIAPP_REG_U16_COMPRESSION_CAPABILITY, "compression_capability" }, /* 65 */
+	{ SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY, "fifo_support_capability" },
+	{ SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY, "dphy_ctrl_capability" },
+	{ SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY, "csi_lane_mode_capability" },
+	{ SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY, "csi_signalling_mode_capability" },
+	{ SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY, "fast_standby_capability" }, /* 70 */
+	{ SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY, "cci_address_control_capability" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS, "max_per_lane_bitrate_1_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS, "max_per_lane_bitrate_2_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS, "max_per_lane_bitrate_3_lane_mode_mbps" },
+	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS, "max_per_lane_bitrate_4_lane_mode_mbps" }, /* 75 */
+	{ SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY, "temp_sensor_capability" },
+	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN, "min_frame_length_lines_bin" },
+	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN, "max_frame_length_lines_bin" },
+	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN, "min_line_length_pck_bin" },
+	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN, "max_line_length_pck_bin" }, /* 80 */
+	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN, "min_line_blanking_pck_bin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN, "fine_integration_time_min_bin" },
+	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, "fine_integration_time_max_margin_bin" },
+	{ SMIAPP_REG_U8_BINNING_CAPABILITY, "binning_capability" },
+	{ SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY, "binning_weighting_capability" }, /* 85 */
+	{ SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY, "data_transfer_if_capability" },
+	{ SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY, "shading_correction_capability" },
+	{ SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY, "green_imbalance_capability" },
+	{ SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY, "black_level_capability" },
+	{ SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY, "module_specific_correction_capability" }, /* 90 */
+	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY, "defect_correction_capability" },
+	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2, "defect_correction_capability_2" },
+	{ SMIAPP_REG_U8_EDOF_CAPABILITY, "edof_capability" },
+	{ SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY, "colour_feedback_capability" },
+	{ SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY, "estimation_mode_capability" }, /* 95 */
+	{ SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY, "estimation_zone_capability" },
+	{ SMIAPP_REG_U16_CAPABILITY_TRDY_MIN, "capability_trdy_min" },
+	{ SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, "flash_mode_capability" },
+	{ SMIAPP_REG_U8_ACTUATOR_CAPABILITY, "actuator_capability" },
+	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1, "bracketing_lut_capability_1" }, /* 100 */
+	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2, "bracketing_lut_capability_2" },
+	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP, "analogue_gain_code_step" },
+	{ 0, NULL },
+};
diff --git a/drivers/media/video/smiapp/smiapp-limits.h b/drivers/media/video/smiapp/smiapp-limits.h
new file mode 100644
index 0000000..7f4836bb
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-limits.h
@@ -0,0 +1,128 @@
+/*
+ * drivers/media/video/smiapp/smiapp-limits.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CAPABILITY			0
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN			1
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX			2
+#define SMIAPP_LIMIT_THS_ZERO_MIN				3
+#define SMIAPP_LIMIT_TCLK_TRAIL_MIN				4
+#define SMIAPP_LIMIT_INTEGRATION_TIME_CAPABILITY		5
+#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MIN		6
+#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN		7
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN			8
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN		9
+#define SMIAPP_LIMIT_DIGITAL_GAIN_CAPABILITY			10
+#define SMIAPP_LIMIT_DIGITAL_GAIN_MIN				11
+#define SMIAPP_LIMIT_DIGITAL_GAIN_MAX				12
+#define SMIAPP_LIMIT_MIN_EXT_CLK_FREQ_HZ			13
+#define SMIAPP_LIMIT_MAX_EXT_CLK_FREQ_HZ			14
+#define SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV			15
+#define SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV			16
+#define SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ				17
+#define SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ				18
+#define SMIAPP_LIMIT_MIN_PLL_MULTIPLIER				19
+#define SMIAPP_LIMIT_MAX_PLL_MULTIPLIER				20
+#define SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ				21
+#define SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ				22
+#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV				23
+#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV				24
+#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ			25
+#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ			26
+#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ			27
+#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ			28
+#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV				29
+#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV				30
+#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES			31
+#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES			32
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK			33
+#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK			34
+#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK			35
+#define SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES			36
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_STEP_SIZE		37
+#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV				38
+#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV				39
+#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ			40
+#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ			41
+#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV				42
+#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV				43
+#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ			44
+#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ			45
+#define SMIAPP_LIMIT_X_ADDR_MIN					46
+#define SMIAPP_LIMIT_Y_ADDR_MIN					47
+#define SMIAPP_LIMIT_X_ADDR_MAX					48
+#define SMIAPP_LIMIT_Y_ADDR_MAX					49
+#define SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE				50
+#define SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE				51
+#define SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE				52
+#define SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE				53
+#define SMIAPP_LIMIT_MIN_EVEN_INC				54
+#define SMIAPP_LIMIT_MAX_EVEN_INC				55
+#define SMIAPP_LIMIT_MIN_ODD_INC				56
+#define SMIAPP_LIMIT_MAX_ODD_INC				57
+#define SMIAPP_LIMIT_SCALING_CAPABILITY				58
+#define SMIAPP_LIMIT_SCALER_M_MIN				59
+#define SMIAPP_LIMIT_SCALER_M_MAX				60
+#define SMIAPP_LIMIT_SCALER_N_MIN				61
+#define SMIAPP_LIMIT_SCALER_N_MAX				62
+#define SMIAPP_LIMIT_SPATIAL_SAMPLING_CAPABILITY		63
+#define SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY			64
+#define SMIAPP_LIMIT_COMPRESSION_CAPABILITY			65
+#define SMIAPP_LIMIT_FIFO_SUPPORT_CAPABILITY			66
+#define SMIAPP_LIMIT_DPHY_CTRL_CAPABILITY			67
+#define SMIAPP_LIMIT_CSI_LANE_MODE_CAPABILITY			68
+#define SMIAPP_LIMIT_CSI_SIGNALLING_MODE_CAPABILITY		69
+#define SMIAPP_LIMIT_FAST_STANDBY_CAPABILITY			70
+#define SMIAPP_LIMIT_CCI_ADDRESS_CONTROL_CAPABILITY		71
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	72
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	73
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	74
+#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	75
+#define SMIAPP_LIMIT_TEMP_SENSOR_CAPABILITY			76
+#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN			77
+#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN			78
+#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN			79
+#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN			80
+#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN			81
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN		82
+#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	83
+#define SMIAPP_LIMIT_BINNING_CAPABILITY				84
+#define SMIAPP_LIMIT_BINNING_WEIGHTING_CAPABILITY		85
+#define SMIAPP_LIMIT_DATA_TRANSFER_IF_CAPABILITY		86
+#define SMIAPP_LIMIT_SHADING_CORRECTION_CAPABILITY		87
+#define SMIAPP_LIMIT_GREEN_IMBALANCE_CAPABILITY			88
+#define SMIAPP_LIMIT_BLACK_LEVEL_CAPABILITY			89
+#define SMIAPP_LIMIT_MODULE_SPECIFIC_CORRECTION_CAPABILITY	90
+#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY		91
+#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY_2		92
+#define SMIAPP_LIMIT_EDOF_CAPABILITY				93
+#define SMIAPP_LIMIT_COLOUR_FEEDBACK_CAPABILITY			94
+#define SMIAPP_LIMIT_ESTIMATION_MODE_CAPABILITY			95
+#define SMIAPP_LIMIT_ESTIMATION_ZONE_CAPABILITY			96
+#define SMIAPP_LIMIT_CAPABILITY_TRDY_MIN			97
+#define SMIAPP_LIMIT_FLASH_MODE_CAPABILITY			98
+#define SMIAPP_LIMIT_ACTUATOR_CAPABILITY			99
+#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_1		100
+#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_2		101
+#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP			102
+#define SMIAPP_LIMIT_LAST					103
diff --git a/drivers/media/video/smiapp/smiapp-quirk.c b/drivers/media/video/smiapp/smiapp-quirk.c
new file mode 100644
index 0000000..dae85a1
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-quirk.c
@@ -0,0 +1,264 @@
+/*
+ * drivers/media/video/smiapp/smiapp-quirk.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+
+#include "smiapp.h"
+
+static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	return smiapp_write(client, (SMIA_REG_8BIT << 16) | reg, val);
+}
+
+static int smiapp_write_8s(struct smiapp_sensor *sensor,
+			   struct smiapp_reg_8 *regs, int len)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	for (; len > 0; len--, regs++) {
+		rval = smiapp_write_8(sensor, regs->reg, regs->val);
+		if (rval < 0) {
+			dev_err(&client->dev,
+				"error %d writing reg 0x%4.4x, val 0x%2.2x",
+				rval, regs->reg, regs->val);
+			return rval;
+		}
+	}
+
+	return 0;
+}
+
+void smiapp_replace_limit(struct smiapp_sensor *sensor,
+			  u32 limit, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
+		smiapp_reg_limits[limit].addr,
+		smiapp_reg_limits[limit].what, val, val);
+	sensor->limits[limit] = val;
+}
+
+int smiapp_replace_limit_at(struct smiapp_sensor *sensor,
+			    u32 reg, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int i;
+
+	for (i = 0; smiapp_reg_limits[i].addr; i++) {
+		if ((smiapp_reg_limits[i].addr & 0xffff) != reg)
+			continue;
+
+		smiapp_replace_limit(sensor, i, val);
+
+		return 0;
+	}
+
+	dev_dbg(&client->dev, "quirk: bad register 0x%4.4x\n", reg);
+
+	return -EINVAL;
+}
+
+static int jt8ew9_limits(struct smiapp_sensor *sensor)
+{
+	if (sensor->minfo.revision_number_major < 0x03)
+		sensor->frame_skip = 1;
+
+	/* Below 24 gain doesn't have effect at all, */
+	/* but ~59 is needed for full dynamic range */
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
+	smiapp_replace_limit(
+		sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
+
+	return 0;
+}
+
+static int jt8ew9_post_poweron(struct smiapp_sensor *sensor)
+{
+	struct smiapp_reg_8 regs[] = {
+		{ 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */
+		{ 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
+		{ 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
+		{ 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */
+		{ 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		{ 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		{ 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */
+		{ 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
+		{ 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */
+		{ 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
+		{ 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
+		/* Taken from v03. No idea what the rest are. */
+		{ 0x32e0, 0x05 },
+		{ 0x32e1, 0x05 },
+		{ 0x32e2, 0x04 },
+		{ 0x32e5, 0x04 },
+		{ 0x32e6, 0x04 },
+
+	};
+
+	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+}
+
+const struct smiapp_quirk smiapp_jt8ew9_quirk = {
+	.limits = jt8ew9_limits,
+	.post_poweron = jt8ew9_post_poweron,
+};
+
+static int imx125es_post_poweron(struct smiapp_sensor *sensor)
+{
+	/* Taken from v02. No idea what the other two are. */
+	struct smiapp_reg_8 regs[] = {
+		/*
+		 * 0x3302: clk during frame blanking:
+		 * 0x00 - HS mode, 0x01 - LP11
+		 */
+		{ 0x3302, 0x01 },
+		{ 0x302d, 0x00 },
+		{ 0x3b08, 0x8c },
+	};
+
+	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+}
+
+const struct smiapp_quirk smiapp_imx125es_quirk = {
+	.post_poweron = imx125es_post_poweron,
+};
+
+static int jt8ev1_limits(struct smiapp_sensor *sensor)
+{
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
+	smiapp_replace_limit(sensor,
+			     SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
+
+	return 0;
+}
+
+static int jt8ev1_post_poweron(struct smiapp_sensor *sensor)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	struct smiapp_reg_8 regs[] = {
+		{ 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */
+		{ 0x30a3, 0xd0 }, /* FLASH STROBE enable */
+		{ 0x3237, 0x00 }, /* For control of pulse timing for ADC */
+		{ 0x3238, 0x43 },
+		{ 0x3301, 0x06 }, /* For analog bias for sensor */
+		{ 0x3302, 0x06 },
+		{ 0x3304, 0x00 },
+		{ 0x3305, 0x88 },
+		{ 0x332a, 0x14 },
+		{ 0x332c, 0x6b },
+		{ 0x3336, 0x01 },
+		{ 0x333f, 0x1f },
+		{ 0x3355, 0x00 },
+		{ 0x3356, 0x20 },
+		{ 0x33bf, 0x20 }, /* Adjust the FBC speed */
+		{ 0x33c9, 0x20 },
+		{ 0x33ce, 0x30 }, /* Adjust the parameter for logic function */
+		{ 0x33cf, 0xec }, /* For Black sun */
+		{ 0x3328, 0x80 }, /* Ugh. No idea what's this. */
+	};
+
+	struct smiapp_reg_8 regs_96[] = {
+		{ 0x30ae, 0x00 }, /* For control of ADC clock */
+		{ 0x30af, 0xd0 },
+		{ 0x30b0, 0x01 },
+	};
+
+	rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
+	if (rval < 0)
+		return rval;
+
+	switch (sensor->platform_data->ext_clk) {
+	case 9600000:
+		return smiapp_write_8s(sensor, regs_96,
+				       ARRAY_SIZE(regs_96));
+	default:
+		dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
+			 sensor->platform_data->ext_clk);
+		return 0;
+	}
+}
+
+static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor)
+{
+	return smiapp_write_8(sensor, 0x3328, 0x00);
+}
+
+static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
+{
+	int rval;
+
+	/* Workaround: allows fast standby to work properly */
+	rval = smiapp_write_8(sensor, 0x3205, 0x04);
+	if (rval < 0)
+		return rval;
+
+	/* Wait for 1 ms + one line => 2 ms is likely enough */
+	usleep_range(2000, 2000);
+
+	/* Restore it */
+	rval = smiapp_write_8(sensor, 0x3205, 0x00);
+	if (rval < 0)
+		return rval;
+
+	return smiapp_write_8(sensor, 0x3328, 0x80);
+}
+
+const struct smiapp_quirk smiapp_jt8ev1_quirk = {
+	.limits = jt8ev1_limits,
+	.post_poweron = jt8ev1_post_poweron,
+	.pre_streamon = jt8ev1_pre_streamon,
+	.post_streamoff = jt8ev1_post_streamoff,
+	.flags = SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE,
+};
+
+static int tcm8500md_limits(struct smiapp_sensor *sensor)
+{
+	smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
+
+	return 0;
+}
+
+const struct smiapp_quirk smiapp_tcm8500md_quirk = {
+	.limits = tcm8500md_limits,
+};
diff --git a/drivers/media/video/smiapp/smiapp-quirk.h b/drivers/media/video/smiapp/smiapp-quirk.h
new file mode 100644
index 0000000..7a1b3a0
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-quirk.h
@@ -0,0 +1,72 @@
+/*
+ * drivers/media/video/smiapp/smiapp-quirk.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_QUIRK__
+#define __SMIAPP_QUIRK__
+
+struct smiapp_sensor;
+
+/**
+ * struct smiapp_quirk - quirks for sensors that deviate from SMIA++ standard
+ *
+ * @limits: Replace sensor->limits with values which can't be read from
+ *	    sensor registers. Called the first time the sensor is powered up.
+ * @post_poweron: Called always after the sensor has been fully powered on.
+ * @pre_streamon: Called just before streaming is enabled.
+ * @post_streamon: Called right after stopping streaming.
+ */
+struct smiapp_quirk {
+	int (*limits)(struct smiapp_sensor *sensor);
+	int (*post_poweron)(struct smiapp_sensor *sensor);
+	int (*pre_streamon)(struct smiapp_sensor *sensor);
+	int (*post_streamoff)(struct smiapp_sensor *sensor);
+	unsigned long flags;
+};
+
+/* op pix clock is for all lanes in total normally */
+#define SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
+
+struct smiapp_reg_8 {
+	u16 reg;
+	u8 val;
+};
+
+void smiapp_replace_limit(struct smiapp_sensor *sensor,
+			  u32 limit, u32 val);
+
+#define smiapp_call_quirk(_sensor, _quirk, ...)				\
+	(_sensor->minfo.quirk &&					\
+	 _sensor->minfo.quirk->_quirk ?					\
+	 _sensor->minfo.quirk->_quirk(_sensor, ##__VA_ARGS__) : 0)
+
+#define smiapp_needs_quirk(_sensor, _quirk)		\
+	(_sensor->minfo.quirk ?				\
+	 _sensor->minfo.quirk->flags & _quirk : 0)
+
+extern const struct smiapp_quirk smiapp_jt8ev1_quirk;
+extern const struct smiapp_quirk smiapp_imx125es_quirk;
+extern const struct smiapp_quirk smiapp_jt8ew9_quirk;
+extern const struct smiapp_quirk smiapp_tcm8500md_quirk;
+
+#endif /* __SMIAPP_QUIRK__ */
diff --git a/drivers/media/video/smiapp/smiapp-reg-defs.h b/drivers/media/video/smiapp/smiapp-reg-defs.h
new file mode 100644
index 0000000..a089eb8
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-reg-defs.h
@@ -0,0 +1,503 @@
+/*
+ * drivers/media/video/smiapp/smiapp-reg-defs.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#define SMIAPP_REG_MK_U8(r) ((SMIA_REG_8BIT << 16) | (r))
+#define SMIAPP_REG_MK_U16(r) ((SMIA_REG_16BIT << 16) | (r))
+#define SMIAPP_REG_MK_U32(r) ((SMIA_REG_32BIT << 16) | (r))
+
+#define SMIAPP_REG_MK_F32(r) (SMIA_REG_FLAG_FLOAT | (SMIA_REG_32BIT << 16) | (r))
+
+#define SMIAPP_REG_U16_MODEL_ID					SMIAPP_REG_MK_U16(0x0000)
+#define SMIAPP_REG_U8_REVISION_NUMBER_MAJOR			SMIAPP_REG_MK_U8(0x0002)
+#define SMIAPP_REG_U8_MANUFACTURER_ID				SMIAPP_REG_MK_U8(0x0003)
+#define SMIAPP_REG_U8_SMIA_VERSION				SMIAPP_REG_MK_U8(0x0004)
+#define SMIAPP_REG_U8_FRAME_COUNT				SMIAPP_REG_MK_U8(0x0005)
+#define SMIAPP_REG_U8_PIXEL_ORDER				SMIAPP_REG_MK_U8(0x0006)
+#define SMIAPP_REG_U16_DATA_PEDESTAL				SMIAPP_REG_MK_U16(0x0008)
+#define SMIAPP_REG_U8_PIXEL_DEPTH				SMIAPP_REG_MK_U8(0x000c)
+#define SMIAPP_REG_U8_REVISION_NUMBER_MINOR			SMIAPP_REG_MK_U8(0x0010)
+#define SMIAPP_REG_U8_SMIAPP_VERSION				SMIAPP_REG_MK_U8(0x0011)
+#define SMIAPP_REG_U8_MODULE_DATE_YEAR				SMIAPP_REG_MK_U8(0x0012)
+#define SMIAPP_REG_U8_MODULE_DATE_MONTH				SMIAPP_REG_MK_U8(0x0013)
+#define SMIAPP_REG_U8_MODULE_DATE_DAY				SMIAPP_REG_MK_U8(0x0014)
+#define SMIAPP_REG_U8_MODULE_DATE_PHASE				SMIAPP_REG_MK_U8(0x0015)
+#define SMIAPP_REG_U16_SENSOR_MODEL_ID				SMIAPP_REG_MK_U16(0x0016)
+#define SMIAPP_REG_U8_SENSOR_REVISION_NUMBER			SMIAPP_REG_MK_U8(0x0018)
+#define SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID			SMIAPP_REG_MK_U8(0x0019)
+#define SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION			SMIAPP_REG_MK_U8(0x001a)
+#define SMIAPP_REG_U32_SERIAL_NUMBER				SMIAPP_REG_MK_U32(0x001c)
+#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x0040)
+#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE		SMIAPP_REG_MK_U8(0x0041)
+#define SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(n)		SMIAPP_REG_MK_U16(0x0042 + ((n) << 1)) /* 0 <= n <= 14 */
+#define SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(n)		SMIAPP_REG_MK_U32(0x0060 + ((n) << 2)) /* 0 <= n <= 7 */
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x0080)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN			SMIAPP_REG_MK_U16(0x0084)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX			SMIAPP_REG_MK_U16(0x0086)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP			SMIAPP_REG_MK_U16(0x0088)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_TYPE			SMIAPP_REG_MK_U16(0x008a)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_M0				SMIAPP_REG_MK_U16(0x008c)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_C0				SMIAPP_REG_MK_U16(0x008e)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_M1				SMIAPP_REG_MK_U16(0x0090)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_C1				SMIAPP_REG_MK_U16(0x0092)
+#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x00c0)
+#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_SUBTYPE			SMIAPP_REG_MK_U8(0x00c1)
+#define SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(n)		SMIAPP_REG_MK_U16(0x00c2 + ((n) << 1))
+#define SMIAPP_REG_U8_MODE_SELECT				SMIAPP_REG_MK_U8(0x0100)
+#define SMIAPP_REG_U8_IMAGE_ORIENTATION				SMIAPP_REG_MK_U8(0x0101)
+#define SMIAPP_REG_U8_SOFTWARE_RESET				SMIAPP_REG_MK_U8(0x0103)
+#define SMIAPP_REG_U8_GROUPED_PARAMETER_HOLD			SMIAPP_REG_MK_U8(0x0104)
+#define SMIAPP_REG_U8_MASK_CORRUPTED_FRAMES			SMIAPP_REG_MK_U8(0x0105)
+#define SMIAPP_REG_U8_FAST_STANDBY_CTRL				SMIAPP_REG_MK_U8(0x0106)
+#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0107)
+#define SMIAPP_REG_U8_2ND_CCI_IF_CONTROL			SMIAPP_REG_MK_U8(0x0108)
+#define SMIAPP_REG_U8_2ND_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0109)
+#define SMIAPP_REG_U8_CSI_CHANNEL_IDENTIFIER			SMIAPP_REG_MK_U8(0x0110)
+#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE			SMIAPP_REG_MK_U8(0x0111)
+#define SMIAPP_REG_U16_CSI_DATA_FORMAT				SMIAPP_REG_MK_U16(0x0112)
+#define SMIAPP_REG_U8_CSI_LANE_MODE				SMIAPP_REG_MK_U8(0x0114)
+#define SMIAPP_REG_U8_CSI2_10_TO_8_DT				SMIAPP_REG_MK_U8(0x0115)
+#define SMIAPP_REG_U8_CSI2_10_TO_7_DT				SMIAPP_REG_MK_U8(0x0116)
+#define SMIAPP_REG_U8_CSI2_10_TO_6_DT				SMIAPP_REG_MK_U8(0x0117)
+#define SMIAPP_REG_U8_CSI2_12_TO_8_DT				SMIAPP_REG_MK_U8(0x0118)
+#define SMIAPP_REG_U8_CSI2_12_TO_7_DT				SMIAPP_REG_MK_U8(0x0119)
+#define SMIAPP_REG_U8_CSI2_12_TO_6_DT				SMIAPP_REG_MK_U8(0x011a)
+#define SMIAPP_REG_U8_CSI2_14_TO_10_DT				SMIAPP_REG_MK_U8(0x011b)
+#define SMIAPP_REG_U8_CSI2_14_TO_8_DT				SMIAPP_REG_MK_U8(0x011c)
+#define SMIAPP_REG_U8_CSI2_16_TO_10_DT				SMIAPP_REG_MK_U8(0x011d)
+#define SMIAPP_REG_U8_CSI2_16_TO_8_DT				SMIAPP_REG_MK_U8(0x011e)
+#define SMIAPP_REG_U8_GAIN_MODE					SMIAPP_REG_MK_U8(0x0120)
+#define SMIAPP_REG_U16_VANA_VOLTAGE				SMIAPP_REG_MK_U16(0x0130)
+#define SMIAPP_REG_U16_VDIG_VOLTAGE				SMIAPP_REG_MK_U16(0x0132)
+#define SMIAPP_REG_U16_VIO_VOLTAGE				SMIAPP_REG_MK_U16(0x0134)
+#define SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ			SMIAPP_REG_MK_U16(0x0136)
+#define SMIAPP_REG_U8_TEMP_SENSOR_CONTROL			SMIAPP_REG_MK_U8(0x0138)
+#define SMIAPP_REG_U8_TEMP_SENSOR_MODE				SMIAPP_REG_MK_U8(0x0139)
+#define SMIAPP_REG_U8_TEMP_SENSOR_OUTPUT			SMIAPP_REG_MK_U8(0x013a)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0200)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0202)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL		SMIAPP_REG_MK_U16(0x0204)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENR		SMIAPP_REG_MK_U16(0x0206)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_RED			SMIAPP_REG_MK_U16(0x0208)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_BLUE			SMIAPP_REG_MK_U16(0x020a)
+#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENB		SMIAPP_REG_MK_U16(0x020c)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENR			SMIAPP_REG_MK_U16(0x020e)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_RED				SMIAPP_REG_MK_U16(0x0210)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0212)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0214)
+#define SMIAPP_REG_U16_VT_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0300)
+#define SMIAPP_REG_U16_VT_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x0302)
+#define SMIAPP_REG_U16_PRE_PLL_CLK_DIV				SMIAPP_REG_MK_U16(0x0304)
+#define SMIAPP_REG_U16_PLL_MULTIPLIER				SMIAPP_REG_MK_U16(0x0306)
+#define SMIAPP_REG_U16_OP_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0308)
+#define SMIAPP_REG_U16_OP_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x030a)
+#define SMIAPP_REG_U16_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x0340)
+#define SMIAPP_REG_U16_LINE_LENGTH_PCK				SMIAPP_REG_MK_U16(0x0342)
+#define SMIAPP_REG_U16_X_ADDR_START				SMIAPP_REG_MK_U16(0x0344)
+#define SMIAPP_REG_U16_Y_ADDR_START				SMIAPP_REG_MK_U16(0x0346)
+#define SMIAPP_REG_U16_X_ADDR_END				SMIAPP_REG_MK_U16(0x0348)
+#define SMIAPP_REG_U16_Y_ADDR_END				SMIAPP_REG_MK_U16(0x034a)
+#define SMIAPP_REG_U16_X_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034c)
+#define SMIAPP_REG_U16_Y_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034e)
+#define SMIAPP_REG_U16_X_EVEN_INC				SMIAPP_REG_MK_U16(0x0380)
+#define SMIAPP_REG_U16_X_ODD_INC				SMIAPP_REG_MK_U16(0x0382)
+#define SMIAPP_REG_U16_Y_EVEN_INC				SMIAPP_REG_MK_U16(0x0384)
+#define SMIAPP_REG_U16_Y_ODD_INC				SMIAPP_REG_MK_U16(0x0386)
+#define SMIAPP_REG_U16_SCALING_MODE				SMIAPP_REG_MK_U16(0x0400)
+#define SMIAPP_REG_U16_SPATIAL_SAMPLING				SMIAPP_REG_MK_U16(0x0402)
+#define SMIAPP_REG_U16_SCALE_M					SMIAPP_REG_MK_U16(0x0404)
+#define SMIAPP_REG_U16_SCALE_N					SMIAPP_REG_MK_U16(0x0406)
+#define SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET			SMIAPP_REG_MK_U16(0x0408)
+#define SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET			SMIAPP_REG_MK_U16(0x040a)
+#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH			SMIAPP_REG_MK_U16(0x040c)
+#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT		SMIAPP_REG_MK_U16(0x040e)
+#define SMIAPP_REG_U16_COMPRESSION_MODE				SMIAPP_REG_MK_U16(0x0500)
+#define SMIAPP_REG_U16_TEST_PATTERN_MODE			SMIAPP_REG_MK_U16(0x0600)
+#define SMIAPP_REG_U16_TEST_DATA_RED				SMIAPP_REG_MK_U16(0x0602)
+#define SMIAPP_REG_U16_TEST_DATA_GREENR				SMIAPP_REG_MK_U16(0x0604)
+#define SMIAPP_REG_U16_TEST_DATA_BLUE				SMIAPP_REG_MK_U16(0x0606)
+#define SMIAPP_REG_U16_TEST_DATA_GREENB				SMIAPP_REG_MK_U16(0x0608)
+#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060a)
+#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_POSITION		SMIAPP_REG_MK_U16(0x060c)
+#define SMIAPP_REG_U16_VERTICAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060e)
+#define SMIAPP_REG_U16_VERTICAL_CURSOR_POSITION			SMIAPP_REG_MK_U16(0x0610)
+#define SMIAPP_REG_U16_FIFO_WATER_MARK_PIXELS			SMIAPP_REG_MK_U16(0x0700)
+#define SMIAPP_REG_U8_TCLK_POST					SMIAPP_REG_MK_U8(0x0800)
+#define SMIAPP_REG_U8_THS_PREPARE				SMIAPP_REG_MK_U8(0x0801)
+#define SMIAPP_REG_U8_THS_ZERO_MIN				SMIAPP_REG_MK_U8(0x0802)
+#define SMIAPP_REG_U8_THS_TRAIL					SMIAPP_REG_MK_U8(0x0803)
+#define SMIAPP_REG_U8_TCLK_TRAIL_MIN				SMIAPP_REG_MK_U8(0x0804)
+#define SMIAPP_REG_U8_TCLK_PREPARE				SMIAPP_REG_MK_U8(0x0805)
+#define SMIAPP_REG_U8_TCLK_ZERO					SMIAPP_REG_MK_U8(0x0806)
+#define SMIAPP_REG_U8_TLPX					SMIAPP_REG_MK_U8(0x0807)
+#define SMIAPP_REG_U8_DPHY_CTRL					SMIAPP_REG_MK_U8(0x0808)
+#define SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS		SMIAPP_REG_MK_U32(0x0820)
+#define SMIAPP_REG_U8_BINNING_MODE				SMIAPP_REG_MK_U8(0x0900)
+#define SMIAPP_REG_U8_BINNING_TYPE				SMIAPP_REG_MK_U8(0x0901)
+#define SMIAPP_REG_U8_BINNING_WEIGHTING				SMIAPP_REG_MK_U8(0x0902)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL			SMIAPP_REG_MK_U8(0x0a00)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS			SMIAPP_REG_MK_U8(0x0a01)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a02)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0			SMIAPP_REG_MK_U8(0x0a04)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_1			SMIAPP_REG_MK_U8(0x0a05)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_2			SMIAPP_REG_MK_U8(0x0a06)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_3			SMIAPP_REG_MK_U8(0x0a07)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_4			SMIAPP_REG_MK_U8(0x0a08)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_5			SMIAPP_REG_MK_U8(0x0a09)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_12		SMIAPP_REG_MK_U8(0x0a10)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_13		SMIAPP_REG_MK_U8(0x0a11)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_14		SMIAPP_REG_MK_U8(0x0a12)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_15		SMIAPP_REG_MK_U8(0x0a13)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_16		SMIAPP_REG_MK_U8(0x0a14)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_17		SMIAPP_REG_MK_U8(0x0a15)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_18		SMIAPP_REG_MK_U8(0x0a16)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_19		SMIAPP_REG_MK_U8(0x0a17)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_20		SMIAPP_REG_MK_U8(0x0a18)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_21		SMIAPP_REG_MK_U8(0x0a19)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_22		SMIAPP_REG_MK_U8(0x0a1a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_23		SMIAPP_REG_MK_U8(0x0a1b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_24		SMIAPP_REG_MK_U8(0x0a1c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_25		SMIAPP_REG_MK_U8(0x0a1d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_26		SMIAPP_REG_MK_U8(0x0a1e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_27		SMIAPP_REG_MK_U8(0x0a1f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_28		SMIAPP_REG_MK_U8(0x0a20)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_29		SMIAPP_REG_MK_U8(0x0a21)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_30		SMIAPP_REG_MK_U8(0x0a22)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_31		SMIAPP_REG_MK_U8(0x0a23)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_32		SMIAPP_REG_MK_U8(0x0a24)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_33		SMIAPP_REG_MK_U8(0x0a25)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_34		SMIAPP_REG_MK_U8(0x0a26)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_35		SMIAPP_REG_MK_U8(0x0a27)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_36		SMIAPP_REG_MK_U8(0x0a28)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_37		SMIAPP_REG_MK_U8(0x0a29)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_38		SMIAPP_REG_MK_U8(0x0a2a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_39		SMIAPP_REG_MK_U8(0x0a2b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_40		SMIAPP_REG_MK_U8(0x0a2c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_41		SMIAPP_REG_MK_U8(0x0a2d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_42		SMIAPP_REG_MK_U8(0x0a2e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_43		SMIAPP_REG_MK_U8(0x0a2f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_44		SMIAPP_REG_MK_U8(0x0a30)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_45		SMIAPP_REG_MK_U8(0x0a31)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_46		SMIAPP_REG_MK_U8(0x0a32)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_47		SMIAPP_REG_MK_U8(0x0a33)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_48		SMIAPP_REG_MK_U8(0x0a34)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_49		SMIAPP_REG_MK_U8(0x0a35)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_50		SMIAPP_REG_MK_U8(0x0a36)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_51		SMIAPP_REG_MK_U8(0x0a37)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_52		SMIAPP_REG_MK_U8(0x0a38)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_53		SMIAPP_REG_MK_U8(0x0a39)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_54		SMIAPP_REG_MK_U8(0x0a3a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_55		SMIAPP_REG_MK_U8(0x0a3b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_56		SMIAPP_REG_MK_U8(0x0a3c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_57		SMIAPP_REG_MK_U8(0x0a3d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_58		SMIAPP_REG_MK_U8(0x0a3e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_59		SMIAPP_REG_MK_U8(0x0a3f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_60		SMIAPP_REG_MK_U8(0x0a40)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_61		SMIAPP_REG_MK_U8(0x0a41)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_62		SMIAPP_REG_MK_U8(0x0a42)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_63		SMIAPP_REG_MK_U8(0x0a43)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_CTRL			SMIAPP_REG_MK_U8(0x0a44)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_STATUS			SMIAPP_REG_MK_U8(0x0a45)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a46)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_0			SMIAPP_REG_MK_U8(0x0a48)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_1			SMIAPP_REG_MK_U8(0x0a49)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_2			SMIAPP_REG_MK_U8(0x0a4a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_3			SMIAPP_REG_MK_U8(0x0a4b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_4			SMIAPP_REG_MK_U8(0x0a4c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_5			SMIAPP_REG_MK_U8(0x0a4d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_6			SMIAPP_REG_MK_U8(0x0a4e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_7			SMIAPP_REG_MK_U8(0x0a4f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_8			SMIAPP_REG_MK_U8(0x0a50)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_9			SMIAPP_REG_MK_U8(0x0a51)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_10		SMIAPP_REG_MK_U8(0x0a52)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_11		SMIAPP_REG_MK_U8(0x0a53)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_12		SMIAPP_REG_MK_U8(0x0a54)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_13		SMIAPP_REG_MK_U8(0x0a55)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_14		SMIAPP_REG_MK_U8(0x0a56)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_15		SMIAPP_REG_MK_U8(0x0a57)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_16		SMIAPP_REG_MK_U8(0x0a58)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_17		SMIAPP_REG_MK_U8(0x0a59)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_18		SMIAPP_REG_MK_U8(0x0a5a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_19		SMIAPP_REG_MK_U8(0x0a5b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_20		SMIAPP_REG_MK_U8(0x0a5c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_21		SMIAPP_REG_MK_U8(0x0a5d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_22		SMIAPP_REG_MK_U8(0x0a5e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_23		SMIAPP_REG_MK_U8(0x0a5f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_24		SMIAPP_REG_MK_U8(0x0a60)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_25		SMIAPP_REG_MK_U8(0x0a61)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_26		SMIAPP_REG_MK_U8(0x0a62)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_27		SMIAPP_REG_MK_U8(0x0a63)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_28		SMIAPP_REG_MK_U8(0x0a64)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_29		SMIAPP_REG_MK_U8(0x0a65)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_30		SMIAPP_REG_MK_U8(0x0a66)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_31		SMIAPP_REG_MK_U8(0x0a67)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_32		SMIAPP_REG_MK_U8(0x0a68)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_33		SMIAPP_REG_MK_U8(0x0a69)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_34		SMIAPP_REG_MK_U8(0x0a6a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_35		SMIAPP_REG_MK_U8(0x0a6b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_36		SMIAPP_REG_MK_U8(0x0a6c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_37		SMIAPP_REG_MK_U8(0x0a6d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_38		SMIAPP_REG_MK_U8(0x0a6e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_39		SMIAPP_REG_MK_U8(0x0a6f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_40		SMIAPP_REG_MK_U8(0x0a70)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_41		SMIAPP_REG_MK_U8(0x0a71)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_42		SMIAPP_REG_MK_U8(0x0a72)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_43		SMIAPP_REG_MK_U8(0x0a73)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_44		SMIAPP_REG_MK_U8(0x0a74)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_45		SMIAPP_REG_MK_U8(0x0a75)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_46		SMIAPP_REG_MK_U8(0x0a76)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_47		SMIAPP_REG_MK_U8(0x0a77)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_48		SMIAPP_REG_MK_U8(0x0a78)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_49		SMIAPP_REG_MK_U8(0x0a79)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_50		SMIAPP_REG_MK_U8(0x0a7a)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_51		SMIAPP_REG_MK_U8(0x0a7b)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_52		SMIAPP_REG_MK_U8(0x0a7c)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_53		SMIAPP_REG_MK_U8(0x0a7d)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_54		SMIAPP_REG_MK_U8(0x0a7e)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_55		SMIAPP_REG_MK_U8(0x0a7f)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_56		SMIAPP_REG_MK_U8(0x0a80)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_57		SMIAPP_REG_MK_U8(0x0a81)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_58		SMIAPP_REG_MK_U8(0x0a82)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_59		SMIAPP_REG_MK_U8(0x0a83)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_60		SMIAPP_REG_MK_U8(0x0a84)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_61		SMIAPP_REG_MK_U8(0x0a85)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_62		SMIAPP_REG_MK_U8(0x0a86)
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_63		SMIAPP_REG_MK_U8(0x0a87)
+#define SMIAPP_REG_U8_SHADING_CORRECTION_ENABLE			SMIAPP_REG_MK_U8(0x0b00)
+#define SMIAPP_REG_U8_LUMINANCE_CORRECTION_LEVEL		SMIAPP_REG_MK_U8(0x0b01)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_ENABLE		SMIAPP_REG_MK_U8(0x0b02)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_WEIGHT		SMIAPP_REG_MK_U8(0x0b03)
+#define SMIAPP_REG_U8_BLACK_LEVEL_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b04)
+#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b05)
+#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b06)
+#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b07)
+#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b08)
+#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b09)
+#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0a)
+#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b0b)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b0c)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_WEIGHT		SMIAPP_REG_MK_U8(0x0b0d)
+#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0e)
+#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b0f)
+#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b10)
+#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b11)
+#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b12)
+#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b13)
+#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b14)
+#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b15)
+#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b16)
+#define SMIAPP_REG_U8_EDOF_MODE					SMIAPP_REG_MK_U8(0x0b80)
+#define SMIAPP_REG_U8_SHARPNESS					SMIAPP_REG_MK_U8(0x0b83)
+#define SMIAPP_REG_U8_DENOISING					SMIAPP_REG_MK_U8(0x0b84)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC				SMIAPP_REG_MK_U8(0x0b85)
+#define SMIAPP_REG_U16_DEPTH_OF_FIELD				SMIAPP_REG_MK_U16(0x0b86)
+#define SMIAPP_REG_U16_FOCUS_DISTANCE				SMIAPP_REG_MK_U16(0x0b88)
+#define SMIAPP_REG_U8_ESTIMATION_MODE_CTRL			SMIAPP_REG_MK_U8(0x0b8a)
+#define SMIAPP_REG_U16_COLOUR_TEMPERATURE			SMIAPP_REG_MK_U16(0x0b8c)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENR			SMIAPP_REG_MK_U16(0x0b8e)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_RED			SMIAPP_REG_MK_U16(0x0b90)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0b92)
+#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0b94)
+#define SMIAPP_REG_U8_ESTIMATION_ZONE_MODE			SMIAPP_REG_MK_U8(0x0bc0)
+#define SMIAPP_REG_U16_FIXED_ZONE_WEIGHTING			SMIAPP_REG_MK_U16(0x0bc2)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_X_START			SMIAPP_REG_MK_U16(0x0bc4)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_Y_START			SMIAPP_REG_MK_U16(0x0bc6)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_WIDTH			SMIAPP_REG_MK_U16(0x0bc8)
+#define SMIAPP_REG_U16_CUSTOM_ZONE_HEIGHT			SMIAPP_REG_MK_U16(0x0bca)
+#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL1			SMIAPP_REG_MK_U8(0x0c00)
+#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL2			SMIAPP_REG_MK_U8(0x0c01)
+#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_1		SMIAPP_REG_MK_U8(0x0c02)
+#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_2		SMIAPP_REG_MK_U8(0x0c03)
+#define SMIAPP_REG_U16_TRDY_CTRL				SMIAPP_REG_MK_U16(0x0c04)
+#define SMIAPP_REG_U16_TRDOUT_CTRL				SMIAPP_REG_MK_U16(0x0c06)
+#define SMIAPP_REG_U16_TSHUTTER_STROBE_DELAY_CTRL		SMIAPP_REG_MK_U16(0x0c08)
+#define SMIAPP_REG_U16_TSHUTTER_STROBE_WIDTH_CTRL		SMIAPP_REG_MK_U16(0x0c0a)
+#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c0c)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c0e)
+#define SMIAPP_REG_U16_TGRST_INTERVAL_CTRL			SMIAPP_REG_MK_U16(0x0c10)
+#define SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT			SMIAPP_REG_MK_U8(0x0c12)
+#define SMIAPP_REG_U16_FLASH_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c14)
+#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL		SMIAPP_REG_MK_U16(0x0c16)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL		SMIAPP_REG_MK_U16(0x0c18)
+#define SMIAPP_REG_U8_FLASH_MODE_RS				SMIAPP_REG_MK_U8(0x0c1a)
+#define SMIAPP_REG_U8_FLASH_TRIGGER_RS				SMIAPP_REG_MK_U8(0x0c1b)
+#define SMIAPP_REG_U8_FLASH_STATUS				SMIAPP_REG_MK_U8(0x0c1c)
+#define SMIAPP_REG_U8_SA_STROBE_MODE				SMIAPP_REG_MK_U8(0x0c1d)
+#define SMIAPP_REG_U16_SA_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c1e)
+#define SMIAPP_REG_U16_TSA_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c20)
+#define SMIAPP_REG_U16_TSA_STROBE_WIDTH_CTRL			SMIAPP_REG_MK_U16(0x0c22)
+#define SMIAPP_REG_U8_SA_STROBE_TRIGGER				SMIAPP_REG_MK_U8(0x0c24)
+#define SMIAPP_REG_U8_SPECIAL_ACTUATOR_STATUS			SMIAPP_REG_MK_U8(0x0c25)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_RS_CTRL	SMIAPP_REG_MK_U16(0x0c26)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_RS_CTRL		SMIAPP_REG_MK_U16(0x0c28)
+#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_RS_CTRL		SMIAPP_REG_MK_U8(0x0c2a)
+#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_CTRL			SMIAPP_REG_MK_U8(0x0c2b)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c2c)
+#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_CTRL		SMIAPP_REG_MK_U16(0x0c2e)
+#define SMIAPP_REG_U8_LOW_LEVEL_CTRL				SMIAPP_REG_MK_U8(0x0c80)
+#define SMIAPP_REG_U16_MAIN_TRIGGER_REF_POINT			SMIAPP_REG_MK_U16(0x0c82)
+#define SMIAPP_REG_U16_MAIN_TRIGGER_T3				SMIAPP_REG_MK_U16(0x0c84)
+#define SMIAPP_REG_U8_MAIN_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c86)
+#define SMIAPP_REG_U16_PHASE1_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c88)
+#define SMIAPP_REG_U8_PHASE1_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8a)
+#define SMIAPP_REG_U16_PHASE2_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c8c)
+#define SMIAPP_REG_U8_PHASE2_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8e)
+#define SMIAPP_REG_U8_MECH_SHUTTER_CTRL				SMIAPP_REG_MK_U8(0x0d00)
+#define SMIAPP_REG_U8_OPERATION_MODE				SMIAPP_REG_MK_U8(0x0d01)
+#define SMIAPP_REG_U8_ACT_STATE1				SMIAPP_REG_MK_U8(0x0d02)
+#define SMIAPP_REG_U8_ACT_STATE2				SMIAPP_REG_MK_U8(0x0d03)
+#define SMIAPP_REG_U16_FOCUS_CHANGE				SMIAPP_REG_MK_U16(0x0d80)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_CONTROL			SMIAPP_REG_MK_U16(0x0d82)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE1		SMIAPP_REG_MK_U16(0x0d84)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE2		SMIAPP_REG_MK_U16(0x0d86)
+#define SMIAPP_REG_U8_STROBE_COUNT_PHASE1			SMIAPP_REG_MK_U8(0x0d88)
+#define SMIAPP_REG_U8_STROBE_COUNT_PHASE2			SMIAPP_REG_MK_U8(0x0d89)
+#define SMIAPP_REG_U8_POSITION					SMIAPP_REG_MK_U8(0x0d8a)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CONTROL			SMIAPP_REG_MK_U8(0x0e00)
+#define SMIAPP_REG_U8_BRACKETING_LUT_MODE			SMIAPP_REG_MK_U8(0x0e01)
+#define SMIAPP_REG_U8_BRACKETING_LUT_ENTRY_CONTROL		SMIAPP_REG_MK_U8(0x0e02)
+#define SMIAPP_REG_U8_LUT_PARAMETERS_START			SMIAPP_REG_MK_U8(0x0e10)
+#define SMIAPP_REG_U8_LUT_PARAMETERS_END			SMIAPP_REG_MK_U8(0x0eff)
+#define SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY		SMIAPP_REG_MK_U16(0x1000)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1004)
+#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN	SMIAPP_REG_MK_U16(0x1006)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1008)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN		SMIAPP_REG_MK_U16(0x100a)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x1080)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_MIN				SMIAPP_REG_MK_U16(0x1084)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_MAX				SMIAPP_REG_MK_U16(0x1086)
+#define SMIAPP_REG_U16_DIGITAL_GAIN_STEP_SIZE			SMIAPP_REG_MK_U16(0x1088)
+#define SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1100)
+#define SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1104)
+#define SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x1108)
+#define SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x110a)
+#define SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x110c)
+#define SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1110)
+#define SMIAPP_REG_U16_MIN_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1114)
+#define SMIAPP_REG_U16_MAX_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1116)
+#define SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1118)
+#define SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x111c)
+#define SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1120)
+#define SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1122)
+#define SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1124)
+#define SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1128)
+#define SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x112c)
+#define SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1130)
+#define SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1134)
+#define SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1136)
+#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1140)
+#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1142)
+#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1144)
+#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1146)
+#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK			SMIAPP_REG_MK_U16(0x1148)
+#define SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES			SMIAPP_REG_MK_U16(0x114a)
+#define SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE		SMIAPP_REG_MK_U8(0x114c)
+#define SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1160)
+#define SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1162)
+#define SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1164)
+#define SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1168)
+#define SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116c)
+#define SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116e)
+#define SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1170)
+#define SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1174)
+#define SMIAPP_REG_U16_X_ADDR_MIN				SMIAPP_REG_MK_U16(0x1180)
+#define SMIAPP_REG_U16_Y_ADDR_MIN				SMIAPP_REG_MK_U16(0x1182)
+#define SMIAPP_REG_U16_X_ADDR_MAX				SMIAPP_REG_MK_U16(0x1184)
+#define SMIAPP_REG_U16_Y_ADDR_MAX				SMIAPP_REG_MK_U16(0x1186)
+#define SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x1188)
+#define SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118a)
+#define SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118c)
+#define SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118e)
+#define SMIAPP_REG_U16_MIN_EVEN_INC				SMIAPP_REG_MK_U16(0x11c0)
+#define SMIAPP_REG_U16_MAX_EVEN_INC				SMIAPP_REG_MK_U16(0x11c2)
+#define SMIAPP_REG_U16_MIN_ODD_INC				SMIAPP_REG_MK_U16(0x11c4)
+#define SMIAPP_REG_U16_MAX_ODD_INC				SMIAPP_REG_MK_U16(0x11c6)
+#define SMIAPP_REG_U16_SCALING_CAPABILITY			SMIAPP_REG_MK_U16(0x1200)
+#define SMIAPP_REG_U16_SCALER_M_MIN				SMIAPP_REG_MK_U16(0x1204)
+#define SMIAPP_REG_U16_SCALER_M_MAX				SMIAPP_REG_MK_U16(0x1206)
+#define SMIAPP_REG_U16_SCALER_N_MIN				SMIAPP_REG_MK_U16(0x1208)
+#define SMIAPP_REG_U16_SCALER_N_MAX				SMIAPP_REG_MK_U16(0x120a)
+#define SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY		SMIAPP_REG_MK_U16(0x120c)
+#define SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY			SMIAPP_REG_MK_U8(0x120e)
+#define SMIAPP_REG_U16_COMPRESSION_CAPABILITY			SMIAPP_REG_MK_U16(0x1300)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINRED			SMIAPP_REG_MK_U16(0x1400)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINRED		SMIAPP_REG_MK_U16(0x1402)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINRED			SMIAPP_REG_MK_U16(0x1404)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINGREEN		SMIAPP_REG_MK_U16(0x1406)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINGREEN		SMIAPP_REG_MK_U16(0x1408)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINGREEN		SMIAPP_REG_MK_U16(0x140a)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINBLUE			SMIAPP_REG_MK_U16(0x140c)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINBLUE		SMIAPP_REG_MK_U16(0x140e)
+#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINBLUE		SMIAPP_REG_MK_U16(0x1410)
+#define SMIAPP_REG_U16_FIFO_SIZE_PIXELS				SMIAPP_REG_MK_U16(0x1500)
+#define SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY			SMIAPP_REG_MK_U8(0x1502)
+#define SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY			SMIAPP_REG_MK_U8(0x1600)
+#define SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1601)
+#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x1602)
+#define SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY			SMIAPP_REG_MK_U8(0x1603)
+#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY		SMIAPP_REG_MK_U8(0x1604)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1608)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x160c)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1610)
+#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1614)
+#define SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1618)
+#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1700)
+#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1702)
+#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1704)
+#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1706)
+#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN		SMIAPP_REG_MK_U16(0x1708)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN		SMIAPP_REG_MK_U16(0x170a)
+#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	SMIAPP_REG_MK_U16(0x170c)
+#define SMIAPP_REG_U8_BINNING_CAPABILITY			SMIAPP_REG_MK_U8(0x1710)
+#define SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY		SMIAPP_REG_MK_U8(0x1711)
+#define SMIAPP_REG_U8_BINNING_SUBTYPES				SMIAPP_REG_MK_U8(0x1712)
+#define SMIAPP_REG_U8_BINNING_TYPE_n(n)				SMIAPP_REG_MK_U8(0x1713 + (n)) /* 1 <= n <= 237 */
+#define SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY		SMIAPP_REG_MK_U8(0x1800)
+#define SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U8(0x1900)
+#define SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY		SMIAPP_REG_MK_U8(0x1901)
+#define SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY			SMIAPP_REG_MK_U8(0x1902)
+#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY	SMIAPP_REG_MK_U8(0x1903)
+#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U16(0x1904)
+#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2		SMIAPP_REG_MK_U16(0x1906)
+#define SMIAPP_REG_U8_EDOF_CAPABILITY				SMIAPP_REG_MK_U8(0x1980)
+#define SMIAPP_REG_U8_ESTIMATION_FRAMES				SMIAPP_REG_MK_U8(0x1981)
+#define SMIAPP_REG_U8_SUPPORTS_SHARPNESS_ADJ			SMIAPP_REG_MK_U8(0x1982)
+#define SMIAPP_REG_U8_SUPPORTS_DENOISING_ADJ			SMIAPP_REG_MK_U8(0x1983)
+#define SMIAPP_REG_U8_SUPPORTS_MODULE_SPECIFIC_ADJ		SMIAPP_REG_MK_U8(0x1984)
+#define SMIAPP_REG_U8_SUPPORTS_DEPTH_OF_FIELD_ADJ		SMIAPP_REG_MK_U8(0x1985)
+#define SMIAPP_REG_U8_SUPPORTS_FOCUS_DISTANCE_ADJ		SMIAPP_REG_MK_U8(0x1986)
+#define SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY		SMIAPP_REG_MK_U8(0x1987)
+#define SMIAPP_REG_U8_EDOF_SUPPORT_AB_NXM			SMIAPP_REG_MK_U8(0x1988)
+#define SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c0)
+#define SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c1)
+#define SMIAPP_REG_U16_EST_DEPTH_OF_FIELD			SMIAPP_REG_MK_U16(0x19c2)
+#define SMIAPP_REG_U16_EST_FOCUS_DISTANCE			SMIAPP_REG_MK_U16(0x19c4)
+#define SMIAPP_REG_U16_CAPABILITY_TRDY_MIN			SMIAPP_REG_MK_U16(0x1a00)
+#define SMIAPP_REG_U8_FLASH_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1a02)
+#define SMIAPP_REG_U16_MECH_SHUT_AND_ACT_START_ADDR		SMIAPP_REG_MK_U16(0x1b02)
+#define SMIAPP_REG_U8_ACTUATOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1b04)
+#define SMIAPP_REG_U16_ACTUATOR_TYPE				SMIAPP_REG_MK_U16(0x1b40)
+#define SMIAPP_REG_U8_AF_DEVICE_ADDRESS				SMIAPP_REG_MK_U8(0x1b42)
+#define SMIAPP_REG_U16_FOCUS_CHANGE_ADDRESS			SMIAPP_REG_MK_U16(0x1b44)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1		SMIAPP_REG_MK_U8(0x1c00)
+#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2		SMIAPP_REG_MK_U8(0x1c01)
+#define SMIAPP_REG_U8_BRACKETING_LUT_SIZE			SMIAPP_REG_MK_U8(0x1c02)
diff --git a/drivers/media/video/smiapp/smiapp-reg.h b/drivers/media/video/smiapp/smiapp-reg.h
new file mode 100644
index 0000000..d0167aa
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-reg.h
@@ -0,0 +1,122 @@
+/*
+ * drivers/media/video/smiapp/smiapp-reg.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_REG_H_
+#define __SMIAPP_REG_H_
+
+#include "smiapp-reg-defs.h"
+
+/* Bits for above register */
+#define SMIAPP_IMAGE_ORIENTATION_HFLIP		(1 << 0)
+#define SMIAPP_IMAGE_ORIENTATION_VFLIP		(1 << 1)
+
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN		(1 << 0)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN		(0 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN		(1 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR	(1 << 2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY	(1 << 0)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY	(1 << 1)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA		(1 << 2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE		(1 << 3)
+
+#define SMIAPP_SOFTWARE_RESET				(1 << 0)
+
+#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE	(1 << 0)
+#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE	(1 << 1)
+
+#define SMIAPP_DPHY_CTRL_AUTOMATIC			0
+/* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */
+#define SMIAPP_DPHY_CTRL_UI				1
+#define SMIAPP_DPHY_CTRL_REGISTER			2
+
+#define SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR	1
+#define SMIAPP_COMPRESSION_MODE_ADVANCED_PREDICTOR	2
+
+#define SMIAPP_MODE_SELECT_SOFTWARE_STANDBY		0
+#define SMIAPP_MODE_SELECT_STREAMING			1
+
+#define SMIAPP_SCALING_MODE_NONE			0
+#define SMIAPP_SCALING_MODE_HORIZONTAL			1
+#define SMIAPP_SCALING_MODE_BOTH			2
+
+#define SMIAPP_SCALING_CAPABILITY_NONE			0
+#define SMIAPP_SCALING_CAPABILITY_HORIZONTAL		1
+#define SMIAPP_SCALING_CAPABILITY_BOTH			2 /* horizontal/both */
+
+/* digital crop right before scaler */
+#define SMIAPP_DIGITAL_CROP_CAPABILITY_NONE		0
+#define SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP	1
+
+#define SMIAPP_BINNING_CAPABILITY_NO			0
+#define SMIAPP_BINNING_CAPABILITY_YES			1
+
+/* Maximum number of binning subtypes */
+#define SMIAPP_BINNING_SUBTYPES				253
+
+#define SMIAPP_PIXEL_ORDER_GRBG				0
+#define SMIAPP_PIXEL_ORDER_RGGB				1
+#define SMIAPP_PIXEL_ORDER_BGGR				2
+#define SMIAPP_PIXEL_ORDER_GBRG				3
+
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL		1
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED		2
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N		8
+#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N	16
+
+#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE		0x01
+#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE		0x02
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK	0x0f
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK	0xf0
+#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT	4
+
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK	0xf000
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT	12
+#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK		0x0fff
+
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK	0xf0000000
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT	28
+#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK		0x0000ffff
+
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED	1
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY	2
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK	3
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK		4
+#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE	5
+
+#define SMIAPP_FAST_STANDBY_CTRL_COMPLETE_FRAMES	0
+#define SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE		1
+
+/* Scaling N factor */
+#define SMIAPP_SCALE_N					16
+
+/* Image statistics registers */
+/* Registers 0x2000 to 0x2fff are reserved for future
+ * use for statistics features.
+ */
+
+/* Manufacturer Specific Registers: 0x3000 to 0x3fff
+ * The manufacturer specifies these as a black box.
+ */
+
+#endif /* __SMIAPP_REG_H_ */
diff --git a/drivers/media/video/smiapp/smiapp-regs.c b/drivers/media/video/smiapp/smiapp-regs.c
new file mode 100644
index 0000000..4851ff7
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-regs.c
@@ -0,0 +1,213 @@
+/*
+ * drivers/media/video/smiapp/smiapp-regs.c
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "smiapp-debug.h"
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+
+#include "smiapp-regs.h"
+
+static uint32_t float_to_u32_mul_1000000(struct i2c_client *client,
+					 uint32_t phloat)
+{
+	int32_t exp;
+	uint64_t man;
+
+	if (phloat >= 0x80000000) {
+		dev_err(&client->dev, "this is a negative number\n");
+		return 0;
+	}
+
+	if (phloat == 0x7f800000)
+		return ~0; /* Inf. */
+
+	if ((phloat & 0x7f800000) == 0x7f800000) {
+		dev_err(&client->dev, "NaN or other special number\n");
+		return 0;
+	}
+
+	/* Valid cases begin here */
+	if (phloat == 0)
+		return 0; /* Valid zero */
+
+	if (phloat > 0x4f800000)
+		return ~0; /* larger than 4294967295 */
+
+	/*
+	 * Unbias exponent (note how phloat is now guaranteed to
+	 * have 0 in the high bit)
+	 */
+	exp = ((int32_t)phloat >> 23) - 127;
+
+	/* Extract mantissa, add missing '1' bit and it's in MHz */
+	man = ((phloat & 0x7fffff) | 0x800000) * 1000000ULL;
+
+	if (exp < 0)
+		man >>= -exp;
+	else
+		man <<= exp;
+
+	man >>= 23; /* Remove mantissa bias */
+
+	return man & 0xffffffff;
+}
+
+
+/*
+ * Read a 8/16/32-bit i2c register.  The value is returned in 'val'.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+int smiapp_read(struct i2c_client *client, u32 reg, u32 *val)
+{
+	struct i2c_msg msg;
+	unsigned char data[4];
+	unsigned int len = (u8)(reg >> 16);
+	u16 offset = reg;
+	int r;
+
+	if (len != SMIA_REG_8BIT && len != SMIA_REG_16BIT
+	    && len != SMIA_REG_32BIT)
+		return -EINVAL;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = data;
+
+	/* high byte goes out first */
+	data[0] = (u8) (offset >> 8);
+	data[1] = (u8) offset;
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		if (r >= 0)
+			r = -EBUSY;
+		goto err;
+	}
+
+	msg.len = len;
+	msg.flags = I2C_M_RD;
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		if (r >= 0)
+			r = -EBUSY;
+		goto err;
+	}
+
+	*val = 0;
+	/* high byte comes first */
+	switch (len) {
+	case SMIA_REG_32BIT:
+		*val = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) +
+			data[3];
+		break;
+	case SMIA_REG_16BIT:
+		*val = (data[0] << 8) + data[1];
+		break;
+	case SMIA_REG_8BIT:
+		*val = data[0];
+		break;
+	default:
+		BUG();
+	}
+
+	if (reg & SMIA_REG_FLAG_FLOAT)
+		*val = float_to_u32_mul_1000000(client, *val);
+
+	return 0;
+
+err:
+	dev_err(&client->dev, "read from offset 0x%x error %d\n", offset, r);
+
+	return r;
+}
+
+/*
+ * Write to a 8/16-bit register.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+int smiapp_write(struct i2c_client *client, u32 reg, u32 val)
+{
+	struct i2c_msg msg;
+	unsigned char data[6];
+	unsigned int retries;
+	unsigned int flags = reg >> 24;
+	unsigned int len = (u8)(reg >> 16);
+	u16 offset = reg;
+	int r;
+
+	if ((len != SMIA_REG_8BIT && len != SMIA_REG_16BIT &&
+	     len != SMIA_REG_32BIT) || flags)
+		return -EINVAL;
+
+	msg.addr = client->addr;
+	msg.flags = 0; /* Write */
+	msg.len = 2 + len;
+	msg.buf = data;
+
+	/* high byte goes out first */
+	data[0] = (u8) (reg >> 8);
+	data[1] = (u8) (reg & 0xff);
+
+	switch (len) {
+	case SMIA_REG_8BIT:
+		data[2] = val;
+		break;
+	case SMIA_REG_16BIT:
+		data[2] = val >> 8;
+		data[3] = val;
+		break;
+	case SMIA_REG_32BIT:
+		data[2] = val >> 24;
+		data[3] = val >> 16;
+		data[4] = val >> 8;
+		data[5] = val;
+		break;
+	default:
+		BUG();
+	}
+
+	for (retries = 0; retries < 5; retries++) {
+		/*
+		 * Due to unknown reason sensor stops responding. This
+		 * loop is a temporaty solution until the root cause
+		 * is found.
+		 */
+		r = i2c_transfer(client->adapter, &msg, 1);
+		if (r == 1) {
+			if (retries)
+				dev_err(&client->dev,
+					"sensor i2c stall encountered. "
+					"retries: %d\n", retries);
+			return 0;
+		}
+
+		usleep_range(2000, 2000);
+	}
+
+	dev_err(&client->dev,
+		"wrote 0x%x to offset 0x%x error %d\n", val, offset, r);
+
+	return r;
+}
diff --git a/drivers/media/video/smiapp/smiapp-regs.h b/drivers/media/video/smiapp/smiapp-regs.h
new file mode 100644
index 0000000..58e8009
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp-regs.h
@@ -0,0 +1,46 @@
+/*
+ * include/media/smiapp/smiapp-regs.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef SMIAPP_REGS_H
+#define SMIAPP_REGS_H
+
+#include <linux/i2c.h>
+#include <linux/types.h>
+
+/* Use upper 8 bits of the type field for flags */
+#define SMIA_REG_FLAG_FLOAT		(1 << 24)
+
+#define SMIA_REG_8BIT			1
+#define SMIA_REG_16BIT			2
+#define SMIA_REG_32BIT			4
+struct smia_reg {
+	u16 type;
+	u16 reg;			/* 16-bit offset */
+	u32 val;			/* 8/16/32-bit value */
+};
+
+int smiapp_read(struct i2c_client *client, u32 reg, u32 *val);
+int smiapp_write(struct i2c_client *client, u32 reg, u32 val);
+
+#endif
diff --git a/drivers/media/video/smiapp/smiapp.h b/drivers/media/video/smiapp/smiapp.h
new file mode 100644
index 0000000..805d8c8
--- /dev/null
+++ b/drivers/media/video/smiapp/smiapp.h
@@ -0,0 +1,251 @@
+/*
+ * drivers/media/video/smiapp/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_PRIV_H_
+#define __SMIAPP_PRIV_H_
+
+#include <linux/mutex.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+#include <media/smiapp.h>
+
+#include "../smiapp-pll.h"
+#include "smiapp-reg.h"
+#include "smiapp-regs.h"
+#include "smiapp-quirk.h"
+
+/*
+ * Standard SMIA++ constants
+ */
+#define SMIA_VERSION_1			10
+#define SMIAPP_VERSION_0_8		8 /* Draft 0.8 */
+#define SMIAPP_VERSION_0_9		9 /* Draft 0.9 */
+#define SMIAPP_VERSION_1		10
+
+#define SMIAPP_PROFILE_0		0
+#define SMIAPP_PROFILE_1		1
+#define SMIAPP_PROFILE_2		2
+
+#define SMIAPP_NVM_PAGE_SIZE		64	/* bytes */
+
+#define SMIAPP_RESET_DELAY_CLOCKS	2400
+#define SMIAPP_RESET_DELAY(clk)				\
+	(1000 +	(SMIAPP_RESET_DELAY_CLOCKS * 1000	\
+		 + (clk) / 1000 - 1) / ((clk) / 1000))
+
+#include "smiapp-limits.h"
+
+struct smiapp_quirk;
+
+#define SMIAPP_MODULE_IDENT_FLAG_REV_LE		(1 << 0)
+
+struct smiapp_module_ident {
+	u8 manufacturer_id;
+	u16 model_id;
+	u8 revision_number_major;
+
+	u8 flags;
+
+	char *name;
+	const struct smiapp_quirk *quirk;
+};
+
+struct smiapp_module_info {
+	u32 manufacturer_id;
+	u32 model_id;
+	u32 revision_number_major;
+	u32 revision_number_minor;
+
+	u32 module_year;
+	u32 module_month;
+	u32 module_day;
+
+	u32 sensor_manufacturer_id;
+	u32 sensor_model_id;
+	u32 sensor_revision_number;
+	u32 sensor_firmware_version;
+
+	u32 smia_version;
+	u32 smiapp_version;
+
+	u32 smiapp_profile;
+
+	char *name;
+	const struct smiapp_quirk *quirk;
+};
+
+#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk)	\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = fl,							\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk)	\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT_L(manufacturer, model, rev, _name)			\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
+	  .name = _name, }
+
+#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk)		\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = 0,							\
+	  .name = _name,						\
+	  .quirk = _quirk, }
+
+#define SMIAPP_IDENT(manufacturer, model, rev, _name)			\
+	{ .manufacturer_id = manufacturer,				\
+	  .model_id = model,						\
+	  .revision_number_major = rev,					\
+	  .flags = 0,							\
+	  .name = _name, }
+
+struct smiapp_reg_limits {
+	u32 addr;
+	char *what;
+};
+
+extern struct smiapp_reg_limits smiapp_reg_limits[];
+
+struct smiapp_csi_data_format {
+	u32 code;
+	u8 width;
+	u8 compressed;
+	u8 pixel_order;
+};
+
+#define SMIAPP_SUBDEVS			3
+
+#define SMIAPP_PA_PAD_SRC		0
+#define SMIAPP_PAD_SINK			0
+#define SMIAPP_PAD_SRC			1
+#define SMIAPP_PADS			2
+
+struct smiapp_binning_subtype {
+	u8 horizontal:4;
+	u8 vertical:4;
+} __packed;
+
+struct smiapp_subdev {
+	struct v4l2_subdev sd;
+	struct media_pad pads[2];
+	struct v4l2_rect sink_fmt;
+	struct v4l2_rect crop[2];
+	struct v4l2_rect compose; /* compose on sink */
+	unsigned short sink_pad;
+	unsigned short source_pad;
+	int npads;
+	struct smiapp_sensor *sensor;
+	struct v4l2_ctrl_handler ctrl_handler;
+};
+
+/*
+ * struct smiapp_sensor - Main device structure
+ */
+struct smiapp_sensor {
+	/*
+	 * "mutex" is used to serialise access to all fields here
+	 * except v4l2_ctrls at the end of the struct. "mutex" is also
+	 * used to serialise access to file handle specific
+	 * information. The exception to this rule is the power_mutex
+	 * below.
+	 */
+	struct mutex mutex;
+	/*
+	 * power_mutex is used to serialise power management related
+	 * activities. Acquiring "mutex" at that time isn't necessary
+	 * since there are no other users anyway.
+	 */
+	struct mutex power_mutex;
+	struct smiapp_subdev ssds[SMIAPP_SUBDEVS];
+	u32 ssds_used;
+	struct smiapp_subdev *src;
+	struct smiapp_subdev *binner;
+	struct smiapp_subdev *scaler;
+	struct smiapp_subdev *pixel_array;
+	struct smiapp_platform_data *platform_data;
+	struct regulator *vana;
+	u32 limits[SMIAPP_LIMIT_LAST];
+	u8 nbinning_subtypes;
+	struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES];
+	u32 mbus_frame_fmts;
+	const struct smiapp_csi_data_format *csi_format;
+	const struct smiapp_csi_data_format *internal_csi_format;
+	u32 default_mbus_frame_fmts;
+	int default_pixel_order;
+
+	u8 binning_horizontal;
+	u8 binning_vertical;
+
+	u8 scale_m;
+	u8 scaling_mode;
+
+	u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */
+	u8 flash_capability;
+	u8 frame_skip;
+
+	int power_count;
+
+	bool streaming;
+	bool dev_init_done;
+
+	u8 *nvm;		/* nvm memory buffer */
+	unsigned int nvm_size;	/* bytes */
+
+	struct smiapp_module_info minfo;
+
+	struct smiapp_pll pll;
+
+	/* Pixel array controls */
+	struct v4l2_ctrl *analog_gain;
+	struct v4l2_ctrl *exposure;
+	struct v4l2_ctrl *hflip;
+	struct v4l2_ctrl *vflip;
+	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *pixel_rate_parray;
+	/* src controls */
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *pixel_rate_csi;
+};
+
+#define to_smiapp_subdev(_sd)				\
+	container_of(_sd, struct smiapp_subdev, sd)
+
+#define to_smiapp_sensor(_sd)	\
+	(to_smiapp_subdev(_sd)->sensor)
+
+#endif /* __SMIAPP_PRIV_H_ */
diff --git a/include/media/smiapp.h b/include/media/smiapp.h
new file mode 100644
index 0000000..a7877cd
--- /dev/null
+++ b/include/media/smiapp.h
@@ -0,0 +1,83 @@
+/*
+ * include/media/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_H_
+#define __SMIAPP_H_
+
+#include <media/v4l2-subdev.h>
+
+#define SMIAPP_NAME		"smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR	(0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR	(0x6e >> 1) /* Alternate I2C Address */
+
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK	0
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE	1
+#define SMIAPP_CSI_SIGNALLING_MODE_CSI2			2
+
+#define SMIAPP_NO_XSHUTDOWN	-1
+
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+	SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+	SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+	u8 mode;
+	u32 strobe_width_high_us;
+	u16 strobe_delay;
+	u16 stobe_start_point;
+	u8 trigger;
+};
+
+struct smiapp_platform_data {
+	/*
+	 * Change the cci address if i2c_addr_alt is set.
+	 * Both default and alternate cci addr need to be present
+	 */
+	unsigned short i2c_addr_dfl;	/* Default i2c addr */
+	unsigned short i2c_addr_alt;	/* Alternate i2c addr */
+
+	unsigned int nvm_size;			/* bytes */
+	unsigned int ext_clk;			/* sensor external clk */
+
+	unsigned int lanes;		/* Number of CSI-2 lanes */
+	u8 csi_signalling_mode;		/* SMIAPP_CSI_SIGNALLING_MODE_* */
+	const s64 *op_sys_clock;
+
+	enum smiapp_module_board_orient module_board_orient;
+
+	struct smiapp_flash_strobe_parms *strobe_setup;
+
+	int (*set_xclk)(struct v4l2_subdev *sd, int hz);
+	int xshutdown;			/* gpio or SMIAPP_NO_XSHUTDOWN */
+};
+
+#endif /* __SMIAPP_H_  */
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.4 35/35] smiapp: Add driver
  2012-03-11 14:45               ` [PATCH v5.4 " Sakari Ailus
@ 2012-03-11 16:32                 ` Laurent Pinchart
  0 siblings, 0 replies; 93+ messages in thread
From: Laurent Pinchart @ 2012-03-11 16:32 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, dacohen, snjw23, andriy.shevchenko, t.stanislaws,
	tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi Sakari,

On Sunday 11 March 2012 16:45:56 Sakari Ailus wrote:
> Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
> three subdevs, pixel array, binner and scaler --- in case the device has a
> scaler.
> 
> Currently it relies on the board code for external clock handling. There is
> no fast way out of this dependency before the ISP drivers (omap3isp) among
> others will be able to export that clock through the clock framework
> instead.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.1 35/35] smiapp: Add driver
  2012-03-08 13:57     ` [PATCH v5.1 35/35] smiapp: Add driver Sakari Ailus
  2012-03-08 14:46       ` Laurent Pinchart
@ 2012-03-08 15:06       ` jean-philippe francois
  2012-03-11  9:04         ` Sakari Ailus
  1 sibling, 1 reply; 93+ messages in thread
From: jean-philippe francois @ 2012-03-08 15:06 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Le 8 mars 2012 14:57, Sakari Ailus <sakari.ailus@iki.fi> a écrit :
> Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
> three subdevs, pixel array, binner and scaler --- in case the device has a
> scaler.
>
> Currently it relies on the board code for external clock handling. There is
> no fast way out of this dependency before the ISP drivers (omap3isp) among
> others will be able to export that clock through the clock framework
> instead.
>
> +       case V4L2_CID_EXPOSURE:
> +               return smiapp_write(
> +                       client,
> +                       SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val);
> +
At this point, knowing pixel clock and line length, it is possible
to get / set the exposure in useconds or millisecond value.

>From userspace, if for example you change the format and crop,
you can just set the expo to a value in msec or usec, and get the
same exposure after your format change.

The driver is IMO the place where we have all the info. Here is some
example code with usec. (The 522 constant is the fine integration register...)

static int  mt9j_expo_to_shutter(struct usb_ovfx2 * ov, u32 expo)
{
	int rc = 0;
	u32 expo_pix; // exposition in pixclk unit
	u16 coarse_expo;
	u16 row_time;
	expo_pix = expo * 96;   /// pixel clock in MHz
	MT9J_RREAD(ov, LINE_LENGTH_PCK, &row_time);
	expo_pix = expo_pix - 522;
	coarse_expo = (expo_pix + row_time/2)/ row_time;
	MT9J_RWRITE(ov, COARSE_EXPO_REG, coarse_expo);
	return rc;
}

static int  mt9j_shutter_to_expo(struct usb_ovfx2 * ov, u32  * expo)
{
	int rc = 0;
	u32 expo_pix; // exposition in pixclk unit
	u16 coarse_expo;
	u16 row_time;
	MT9J_RREAD(ov, LINE_LENGTH_PCK, &row_time);
	MT9J_RREAD(ov, COARSE_EXPO_REG, &coarse_expo);
	expo_pix = row_time * coarse_expo + 522;
	*expo = expo_pix / (96);
	return rc;
}

Maybe you have enough on your plate for now, and this can
wait after inclusion, but it is a nice abstraction to have  from
userspace point of view.

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.1 35/35] smiapp: Add driver
  2012-03-08 15:06       ` [PATCH v5.1 " jean-philippe francois
@ 2012-03-11  9:04         ` Sakari Ailus
  2012-03-12  9:44           ` jean-philippe francois
  0 siblings, 1 reply; 93+ messages in thread
From: Sakari Ailus @ 2012-03-11  9:04 UTC (permalink / raw)
  To: jean-philippe francois
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Hi François,

On Thu, Mar 08, 2012 at 04:06:34PM +0100, jean-philippe francois wrote:
> Le 8 mars 2012 14:57, Sakari Ailus <sakari.ailus@iki.fi> a écrit :
> > Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
> > three subdevs, pixel array, binner and scaler --- in case the device has a
> > scaler.
> >
> > Currently it relies on the board code for external clock handling. There is
> > no fast way out of this dependency before the ISP drivers (omap3isp) among
> > others will be able to export that clock through the clock framework
> > instead.
> >
> > +       case V4L2_CID_EXPOSURE:
> > +               return smiapp_write(
> > +                       client,
> > +                       SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val);
> > +
> At this point, knowing pixel clock and line length, it is possible
> to get / set the exposure in useconds or millisecond value.

It is possible, but still I don't think we even want that at this level.
This is a fairly low level interface.

The exposure time in seconds can always be constructed from horizontal and
vertical blanking and the pixel rate in the user space.

How you choose the exposure value in seconds does contain policy decisions
which belong to the user space. Sensor drivers don't even have enough
information to make these decisions. Providing the exposure time in native
unit for sensors allows making these decisions in the user space.

For example:

- To get a common frame rate such as 30 or 25 fps, you need to add blanking,
either horizontal or vertical. Using horizontal blanking gives you more
unwanted rolling shutter effect but amortises the data rate over time. Which
one you want (horizontal or vertical) is dependent on your hardware and what
else is involved in your use case

- Hardware limitations. Most blocks in the OMAP 3 ISP have the maximum speed
of is 100 Mp/s but for the CSI-2 receiver it's 200 Mp/s. So if the ISP is
configured to write the images to memory in the CSI-2 receiver, the maximum
pixel rate is 200 Mp/s, not 100. This kind of limitations are quite common
in ISPs and not limited to OMAP 3 ISP. Should the sensor driver know which
blocks are part of the pipeline, and limit minimum frame time based on that?
I admit not everything is in place yet for the full solution of this
problem, but making the pixel rate configurable available to the user space
is definitely a part of it. Ideally the user should be provided a way to
enumerate these limitations to be able to make informed decisions.

It shouldn't be the responsibility of the regular applications to deal with
these things, though. We need additional functionality in libv4l2 to provide
a higher level interface to the exposure time --- just like for the pipeline
configuration. On the other hand, an application tailored to a device must
be able to make these decisions by itself.

> From userspace, if for example you change the format and crop,
> you can just set the expo to a value in msec or usec, and get the
> same exposure after your format change.
> 
> The driver is IMO the place where we have all the info. Here is some
> example code with usec. (The 522 constant is the fine integration register...)
> 
> static int  mt9j_expo_to_shutter(struct usb_ovfx2 * ov, u32 expo)
> {
> 	int rc = 0;
> 	u32 expo_pix; // exposition in pixclk unit
> 	u16 coarse_expo;
> 	u16 row_time;
> 	expo_pix = expo * 96;   /// pixel clock in MHz
> 	MT9J_RREAD(ov, LINE_LENGTH_PCK, &row_time);
> 	expo_pix = expo_pix - 522;
> 	coarse_expo = (expo_pix + row_time/2)/ row_time;
> 	MT9J_RWRITE(ov, COARSE_EXPO_REG, coarse_expo);
> 	return rc;
> }
> 
> static int  mt9j_shutter_to_expo(struct usb_ovfx2 * ov, u32  * expo)
> {
> 	int rc = 0;
> 	u32 expo_pix; // exposition in pixclk unit
> 	u16 coarse_expo;
> 	u16 row_time;
> 	MT9J_RREAD(ov, LINE_LENGTH_PCK, &row_time);
> 	MT9J_RREAD(ov, COARSE_EXPO_REG, &coarse_expo);
> 	expo_pix = row_time * coarse_expo + 522;
> 	*expo = expo_pix / (96);
> 	return rc;
> }
> 
> Maybe you have enough on your plate for now, and this can
> wait after inclusion, but it is a nice abstraction to have  from
> userspace point of view.

Kind regards,

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	jabber/XMPP/Gmail: sailus@retiisi.org.uk

^ permalink raw reply	[flat|nested] 93+ messages in thread

* Re: [PATCH v5.1 35/35] smiapp: Add driver
  2012-03-11  9:04         ` Sakari Ailus
@ 2012-03-12  9:44           ` jean-philippe francois
  0 siblings, 0 replies; 93+ messages in thread
From: jean-philippe francois @ 2012-03-12  9:44 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linux-media, laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

Le 11 mars 2012 10:04, Sakari Ailus <sakari.ailus@iki.fi> a écrit :
> Hi François,
>
> On Thu, Mar 08, 2012 at 04:06:34PM +0100, jean-philippe francois wrote:
>> Le 8 mars 2012 14:57, Sakari Ailus <sakari.ailus@iki.fi> a écrit :
>> > Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
>> > three subdevs, pixel array, binner and scaler --- in case the device has a
>> > scaler.
>> >
>> > Currently it relies on the board code for external clock handling. There is
>> > no fast way out of this dependency before the ISP drivers (omap3isp) among
>> > others will be able to export that clock through the clock framework
>> > instead.
>> >
>> > +       case V4L2_CID_EXPOSURE:
>> > +               return smiapp_write(
>> > +                       client,
>> > +                       SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val);
>> > +
>> At this point, knowing pixel clock and line length, it is possible
>> to get / set the exposure in useconds or millisecond value.
>
> It is possible, but still I don't think we even want that at this level.
> This is a fairly low level interface.
>
> The exposure time in seconds can always be constructed from horizontal and
> vertical blanking and the pixel rate in the user space.
>
I think it is on the side of abstraction, not on the side of policy.
If you want to sort this in userspace, then you need to decide
on a common unit for the exposure control.

Is it a number of pixel, a number of line, anumber of quarter of line ?
If userspace does not know that, then it needs to know which kind of sensor
it is driving, and then the driver somehow failed at providing
abstraction. And I
should not have to use a library with all the quirks for all the existing
sensor out there when it could have been done at the driver level. Modularity
is generally lost when you leave the solution to userspace.

I think there are two orthogonal subject here :
-one is abstracting sensor differences, to expose sensor capabilities
in a way that is sensible or natural. Wether you set  the exposure to 50 msec
or 337 "native unit" does not change the fact that it may conflicts
with a previous
framerate settings of 1/30 sec, but it is much easier to understand
what you do using msec.

- The other subject is how to solve a particular set of constraints
with a given set
of conflicting controls. As you pointed it, framerate and exposure can be one
of those. Let's suppose the application adjust the framerate, using
hblank. Exposure will change as
a consequences . If the application wants to keep the same exposure,
it will either
   - do sensor dependant computation to compute a new "native unit"
exposure value.
   - Set the exposure to it's previous value using "natural, sensor
independent" unit.
In both cases, the exposure unit has no effect on the decision making
ability of the
application. In both cases, if the new exposure value is out of range,
a decision must be taken
wether framerate should limit exposure or not. And in this particular
case, the policy is clearly in
the driver already, since setting vblank determine the exposure setting limits.

So to sum up :
- Exposure control unit has nothing to do with policy, but is rather a
matter of useful abstraction
- Conflicting control is another orthogonal problem.

Jean-Philippe François

^ permalink raw reply	[flat|nested] 93+ messages in thread

* [PATCH v5 35/35] rm680: Add camera init
  2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
                   ` (33 preceding siblings ...)
  2012-03-06 16:33 ` [PATCH v5 34/35] smiapp: Generic SMIA++/SMIA PLL calculator Sakari Ailus
@ 2012-03-06 16:33 ` Sakari Ailus
  34 siblings, 0 replies; 93+ messages in thread
From: Sakari Ailus @ 2012-03-06 16:33 UTC (permalink / raw)
  To: linux-media
  Cc: laurent.pinchart, dacohen, snjw23, andriy.shevchenko,
	t.stanislaws, tuukkat76, k.debski, riverful, hverkuil, teturtia,
	pradeep.sawlani

From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>

This currently introduces an extra file to the arch/arm/mach-omap2
directory: board-rm680-camera.c. Keeping the device tree in mind, the
context of the file could be represented as static data with one exception:
the external clock to the sensor.

This external clock is provided by the OMAP 3 SoC and required by the
sensor. The issue is that the clock originates from the ISP and not from
PRCM block as the other clocks and thus is not supported by the clock
framework. Otherwise the sensor driver could just clk_get() and clk_enable()
it, just like the regulators and gpios.

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-omap2/Makefile             |    3 +-
 arch/arm/mach-omap2/board-rm680-camera.c |  375 ++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/board-rm680.c        |   38 +++
 3 files changed, 415 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-rm680-camera.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fc9b238..f92cc92 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -206,7 +206,8 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
-					   sdram-nokia.o
+					   sdram-nokia.o \
+					   board-rm680-camera.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   sdram-nokia.o \
 					   board-rx51-peripherals.o \
diff --git a/arch/arm/mach-omap2/board-rm680-camera.c b/arch/arm/mach-omap2/board-rm680-camera.c
new file mode 100644
index 0000000..4306118
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rm680-camera.c
@@ -0,0 +1,375 @@
+/**
+ * arch/arm/mach-omap2/board-rm680-camera.c
+ *
+ * Copyright (C) 2010--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Based on board-rx71-camera.c by Vimarsh Zutshi
+ * Based on board-rx51-camera.c by Sakari Ailus
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+
+#include <asm/mach-types.h>
+#include <plat/omap-pm.h>
+
+#include <media/omap3isp.h>
+#include <media/smiapp.h>
+
+#include "../../../drivers/media/video/omap3isp/isp.h"
+#include "devices.h"
+
+#define SEC_CAMERA_RESET_GPIO	97
+
+#define RM680_PRI_SENSOR	1
+#define RM680_PRI_LENS		2
+#define RM680_SEC_SENSOR	3
+#define MAIN_CAMERA_XCLK	ISP_XCLK_A
+#define SEC_CAMERA_XCLK		ISP_XCLK_B
+
+/*
+ *
+ * Main Camera Module EXTCLK
+ * Used by the sensor and the actuator driver.
+ *
+ */
+static struct camera_xclk {
+	u32 hz;
+	u32 lock;
+	u8 xclksel;
+} cameras_xclk;
+
+static DEFINE_MUTEX(lock_xclk);
+
+static int rm680_update_xclk(struct v4l2_subdev *subdev, u32 hz, u32 which,
+			     u8 xclksel)
+{
+	struct isp_device *isp = v4l2_dev_to_isp_device(subdev->v4l2_dev);
+	int ret;
+
+	mutex_lock(&lock_xclk);
+
+	if (which == RM680_SEC_SENSOR) {
+		if (cameras_xclk.xclksel == MAIN_CAMERA_XCLK) {
+			ret = -EBUSY;
+			goto done;
+		}
+	} else {
+		if (cameras_xclk.xclksel == SEC_CAMERA_XCLK) {
+			ret = -EBUSY;
+			goto done;
+		}
+	}
+
+	if (hz) {	/* Turn on */
+		cameras_xclk.lock |= which;
+		if (cameras_xclk.hz == 0) {
+			isp->platform_cb.set_xclk(isp, hz, xclksel);
+			cameras_xclk.hz = hz;
+			cameras_xclk.xclksel = xclksel;
+		}
+	} else {	/* Turn off */
+		cameras_xclk.lock &= ~which;
+		if (cameras_xclk.lock == 0) {
+			isp->platform_cb.set_xclk(isp, 0, xclksel);
+			cameras_xclk.hz = 0;
+			cameras_xclk.xclksel = 0;
+		}
+	}
+
+	ret = cameras_xclk.hz;
+
+done:
+	mutex_unlock(&lock_xclk);
+	return ret;
+}
+
+/*
+ *
+ * Main Camera Sensor
+ *
+ */
+
+static int rm680_main_camera_set_xclk(struct v4l2_subdev *sd, int hz)
+{
+	return rm680_update_xclk(sd, hz, RM680_PRI_SENSOR, MAIN_CAMERA_XCLK);
+}
+
+static struct smiapp_flash_strobe_parms rm680_main_camera_strobe_setup = {
+	.mode			= 0x0c,
+	.strobe_width_high_us	= 100000,
+	.strobe_delay		= 0,
+	.stobe_start_point	= 0,
+	.trigger		= 0,
+};
+
+static struct smiapp_platform_data rm696_main_camera_platform_data = {
+	.i2c_addr_dfl		= SMIAPP_DFL_I2C_ADDR,
+	.i2c_addr_alt		= SMIAPP_ALT_I2C_ADDR,
+	.nvm_size		= 16 * 64,
+	.ext_clk		= 9.6 * 1000 * 1000,
+	.lanes			= 2,
+	/* bit rate / ddr / lanes */
+	.op_sys_clock		= (s64 []){ 796800000 / 2 / 2,
+					    840000000 / 2 / 2,
+					    1996800000 / 2 / 2, 0 },
+	.csi_signalling_mode	= SMIAPP_CSI_SIGNALLING_MODE_CSI2,
+	.strobe_setup		= &rm680_main_camera_strobe_setup,
+	.set_xclk		= rm680_main_camera_set_xclk,
+	.xshutdown		= SMIAPP_NO_XSHUTDOWN,
+};
+
+static struct smiapp_platform_data rm680_main_camera_platform_data = {
+	.i2c_addr_dfl		= SMIAPP_DFL_I2C_ADDR,
+	.i2c_addr_alt		= SMIAPP_ALT_I2C_ADDR,
+	.nvm_size		= 16 * 64,
+	.ext_clk		= 9.6 * 1000 * 1000,
+	.lanes			= 2,
+	.op_sys_clock		= (s64 []){ 840000000 / 2 / 2,
+					    1334400000 / 2 / 2,
+					    1593600000 / 2 / 2, 0 },
+	.csi_signalling_mode	= SMIAPP_CSI_SIGNALLING_MODE_CSI2,
+	.module_board_orient	= SMIAPP_MODULE_BOARD_ORIENT_180,
+	.strobe_setup		= &rm680_main_camera_strobe_setup,
+	.set_xclk		= rm680_main_camera_set_xclk,
+	.xshutdown		= SMIAPP_NO_XSHUTDOWN,
+};
+
+/*
+ *
+ * SECONDARY CAMERA Sensor
+ *
+ */
+
+#define SEC_CAMERA_XCLK		ISP_XCLK_B
+
+static int rm680_sec_camera_set_xclk(struct v4l2_subdev *sd, int hz)
+{
+	return rm680_update_xclk(sd, hz, RM680_SEC_SENSOR, SEC_CAMERA_XCLK);
+}
+
+static struct smiapp_platform_data rm696_sec_camera_platform_data = {
+	.ext_clk		= 10.8 * 1000 * 1000,
+	.lanes			= 1,
+	/* bit rate / ddr */
+	.op_sys_clock		= (s64 []){ 13770000 * 10 / 2, 0 },
+	.csi_signalling_mode	= SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK,
+	.module_board_orient	= SMIAPP_MODULE_BOARD_ORIENT_180,
+	.set_xclk		= rm680_sec_camera_set_xclk,
+	.xshutdown		= SEC_CAMERA_RESET_GPIO,
+};
+
+static struct smiapp_platform_data rm680_sec_camera_platform_data = {
+	.ext_clk		= 10.8 * 1000 * 1000,
+	.lanes			= 1,
+	/* bit rate / ddr */
+	.op_sys_clock		= (s64 []){ 11880000 * 10 / 2, 0 },
+	.csi_signalling_mode	= SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK,
+	.set_xclk		= rm680_sec_camera_set_xclk,
+	.xshutdown		= SEC_CAMERA_RESET_GPIO,
+};
+
+/*
+ *
+ * Init all the modules
+ *
+ */
+
+#define CAMERA_I2C_BUS_NUM		2
+#define AD5836_I2C_BUS_NUM		2
+#define AS3645A_I2C_BUS_NUM		2
+
+static struct i2c_board_info rm696_camera_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO(SMIAPP_NAME, SMIAPP_ALT_I2C_ADDR),
+		.platform_data = &rm696_main_camera_platform_data,
+	},
+	{
+		I2C_BOARD_INFO(SMIAPP_NAME, SMIAPP_DFL_I2C_ADDR),
+		.platform_data = &rm696_sec_camera_platform_data,
+	},
+};
+
+static struct i2c_board_info rm680_camera_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO(SMIAPP_NAME, SMIAPP_ALT_I2C_ADDR),
+		.platform_data = &rm680_main_camera_platform_data,
+	},
+	{
+		I2C_BOARD_INFO(SMIAPP_NAME, SMIAPP_DFL_I2C_ADDR),
+		.platform_data = &rm680_sec_camera_platform_data,
+	},
+};
+
+static struct isp_subdev_i2c_board_info rm696_camera_primary_subdevs[] = {
+	{
+		.board_info = &rm696_camera_i2c_devices[0],
+		.i2c_adapter_id = CAMERA_I2C_BUS_NUM,
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_subdev_i2c_board_info rm696_camera_secondary_subdevs[] = {
+	{
+		.board_info = &rm696_camera_i2c_devices[1],
+		.i2c_adapter_id = CAMERA_I2C_BUS_NUM,
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_subdev_i2c_board_info rm680_camera_primary_subdevs[] = {
+	{
+		.board_info = &rm680_camera_i2c_devices[0],
+		.i2c_adapter_id = CAMERA_I2C_BUS_NUM,
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_subdev_i2c_board_info rm680_camera_secondary_subdevs[] = {
+	{
+		.board_info = &rm680_camera_i2c_devices[1],
+		.i2c_adapter_id = CAMERA_I2C_BUS_NUM,
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_v4l2_subdevs_group rm696_camera_subdevs[] = {
+	{
+		.subdevs = rm696_camera_primary_subdevs,
+		.interface = ISP_INTERFACE_CSI2A_PHY2,
+		.bus = { .csi2 = {
+			.crc		= 1,
+			.vpclk_div	= 1,
+			.lanecfg	= {
+				.clk = {
+					.pol = 1,
+					.pos = 2,
+				},
+				.data[0] = {
+					.pol = 1,
+					.pos = 1,
+				},
+				.data[1] = {
+					.pol = 1,
+					.pos = 3,
+				},
+			},
+		} },
+	},
+	{
+		.subdevs = rm696_camera_secondary_subdevs,
+		.interface = ISP_INTERFACE_CCP2B_PHY1,
+		.bus = { .ccp2 = {
+			.strobe_clk_pol	= 0,
+			.crc		= 0,
+			.ccp2_mode	= 0,
+			.phy_layer	= 0,
+			.vpclk_div	= 2,
+			.lanecfg	= {
+				.clk = {
+					.pol = 0,
+					.pos = 1,
+				},
+				.data[0] = {
+					.pol = 0,
+					.pos = 2,
+				},
+			},
+		} },
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_v4l2_subdevs_group rm680_camera_subdevs[] = {
+	{
+		.subdevs = rm680_camera_primary_subdevs,
+		.interface = ISP_INTERFACE_CSI2A_PHY2,
+		.bus = { .csi2 = {
+			.crc		= 1,
+			.vpclk_div	= 1,
+			.lanecfg	= {
+				.clk = {
+					.pol = 1,
+					.pos = 2,
+				},
+				.data[0] = {
+					.pol = 1,
+					.pos = 3,
+				},
+				.data[1] = {
+					.pol = 1,
+					.pos = 1,
+				},
+			},
+		} },
+	},
+	{
+		.subdevs = rm680_camera_secondary_subdevs,
+		.interface = ISP_INTERFACE_CCP2B_PHY1,
+		.bus = { .ccp2 = {
+			.strobe_clk_pol	= 0,
+			.crc		= 0,
+			.ccp2_mode	= 0,
+			.phy_layer	= 0,
+			.vpclk_div	= 2,
+			.lanecfg	= {
+				.clk = {
+					.pol = 0,
+					.pos = 1,
+				},
+				.data[0] = {
+					.pol = 0,
+					.pos = 2,
+				},
+			},
+		} },
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_platform_data rm696_isp_platform_data = {
+	.subdevs = rm696_camera_subdevs,
+};
+
+static struct isp_platform_data rm680_isp_platform_data = {
+	.subdevs = rm680_camera_subdevs,
+};
+
+static inline int board_is_rm680(void)
+{
+	return (system_rev & 0x00f0) == 0x0020;
+}
+
+void __init rm680_camera_init(void)
+{
+	struct isp_platform_data *pdata;
+
+	if (board_is_rm680())
+		pdata = &rm680_isp_platform_data;
+	else
+		pdata = &rm696_isp_platform_data;
+
+	if (omap3_init_camera(pdata) < 0)
+		pr_warn("%s: unable to register camera platform device\n",
+			__func__);
+}
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 8678b38..71607a70 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -66,6 +66,39 @@ static struct platform_device rm680_vemmc_device = {
 	},
 };
 
+#define REGULATOR_INIT_DATA(_name, _min, _max, _apply, _ops_mask) \
+	static struct regulator_init_data _name##_data = { \
+		.constraints = { \
+			.name                   = #_name, \
+			.min_uV                 = _min, \
+			.max_uV                 = _max, \
+			.apply_uV               = _apply, \
+			.valid_modes_mask       = REGULATOR_MODE_NORMAL | \
+						REGULATOR_MODE_STANDBY, \
+			.valid_ops_mask         = _ops_mask, \
+		}, \
+		.num_consumer_supplies  = ARRAY_SIZE(_name##_consumers), \
+		.consumer_supplies      = _name##_consumers, \
+}
+#define REGULATOR_INIT_DATA_FIXED(_name, _voltage) \
+	REGULATOR_INIT_DATA(_name, _voltage, _voltage, true, \
+				REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE)
+
+static struct regulator_consumer_supply rm680_vaux2_consumers[] = {
+	REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),	/* OMAP ISP */
+	REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),	/* OMAP ISP */
+	REGULATOR_SUPPLY("vaux2", NULL),
+};
+REGULATOR_INIT_DATA_FIXED(rm680_vaux2, 1800000);
+
+static struct regulator_consumer_supply rm680_vaux3_consumers[] = {
+	REGULATOR_SUPPLY("VANA", "2-0037"),	/* Main Camera Sensor */
+	REGULATOR_SUPPLY("VANA", "2-000e"),	/* Main Camera Lens */
+	REGULATOR_SUPPLY("VANA", "2-0010"),	/* Front Camera */
+	REGULATOR_SUPPLY("vaux3", NULL),
+};
+REGULATOR_INIT_DATA_FIXED(rm680_vaux3, 2800000);
+
 static struct platform_device *rm680_peripherals_devices[] __initdata = {
 	&rm680_vemmc_device,
 };
@@ -82,6 +115,8 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = {
 static struct twl4030_platform_data rm680_twl_data = {
 	.gpio			= &rm680_gpio_data,
 	/* add rest of the children here */
+	.vaux2			= &rm680_vaux2_data,
+	.vaux3			= &rm680_vaux3_data,
 };
 
 static void __init rm680_i2c_init(void)
@@ -129,6 +164,8 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
+void rm680_camera_init(void);
+
 static void __init rm680_init(void)
 {
 	struct omap_sdrc_params *sdrc_params;
@@ -141,6 +178,7 @@ static void __init rm680_init(void)
 
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
+	rm680_camera_init();
 }
 
 MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
-- 
1.7.2.5


^ permalink raw reply related	[flat|nested] 93+ messages in thread

end of thread, other threads:[~2012-05-14 16:02 UTC | newest]

Thread overview: 93+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-06 16:32 [PATCH v5 0/35] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 01/35] v4l: Introduce integer menu controls Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 02/35] v4l: Document " Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 03/35] vivi: Add an integer menu test control Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 04/35] v4l: VIDIOC_SUBDEV_S_SELECTION and VIDIOC_SUBDEV_G_SELECTION IOCTLs Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 05/35] v4l: vdev_to_v4l2_subdev() should have return type "struct v4l2_subdev *" Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 06/35] v4l: Check pad number in get try pointer functions Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 07/35] v4l: Support s_crop and g_crop through s/g_selection Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 08/35] v4l: Add subdev selections documentation: svg and dia files Sakari Ailus
2012-03-06 16:42   ` Laurent Pinchart
2012-03-06 16:32 ` [PATCH v5 09/35] v4l: Add subdev selections documentation Sakari Ailus
2012-03-06 16:44   ` Laurent Pinchart
2012-03-07  8:53   ` Michael Jones
2012-03-07 18:11     ` Sakari Ailus
2012-03-15  9:55   ` Sylwester Nawrocki
2012-03-15 13:00     ` Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 10/35] v4l: Mark VIDIOC_SUBDEV_G_CROP and VIDIOC_SUBDEV_S_CROP obsolete Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 11/35] v4l: Image source control class Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 12/35] v4l: Image processing " Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 13/35] v4l: Document raw bayer 4CC codes Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 14/35] v4l: Add DPCM compressed raw bayer pixel formats Sakari Ailus
2012-03-21  9:37   ` Prabhakar Lad
2012-03-21  9:53     ` Sakari Ailus
2012-03-21 11:44     ` [PATCH v5.5 14/40] " Sakari Ailus
2012-03-21 12:08       ` Prabhakar Lad
2012-03-06 16:32 ` [PATCH v5 15/35] media: Add link_validate() op to check links to the sink pad Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 16/35] v4l: Improve sub-device documentation for pad ops Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 17/35] v4l: Implement v4l2_subdev_link_validate() Sakari Ailus
2012-03-06 16:32 ` [PATCH v5 18/35] v4l: Allow changing control handler lock Sakari Ailus
2012-05-14 15:27   ` Sylwester Nawrocki
2012-05-14 15:45     ` Sakari Ailus
2012-05-14 16:02       ` Sylwester Nawrocki
2012-05-14 15:48     ` Sylwester Nawrocki
2012-03-06 16:33 ` [PATCH v5 19/35] omap3isp: Support additional in-memory compressed bayer formats Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 20/35] omap3isp: Move definitions required by board code under include/media Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 21/35] omap3: add definition for CONTROL_CAMERA_PHY_CTRL Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 22/35] omap3isp: Move setting constaints above media_entity_pipeline_start Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 23/35] omap3isp: Assume media_entity_pipeline_start may fail Sakari Ailus
2012-03-06 16:45   ` Laurent Pinchart
2012-03-06 16:33 ` [PATCH v5 24/35] omap3isp: Add lane configuration to platform data Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 25/35] omap3isp: Collect entities that are part of the pipeline Sakari Ailus
2012-03-07 10:35   ` Laurent Pinchart
2012-03-07 17:20     ` Sakari Ailus
2012-03-07 17:22       ` [PATCH v5.1 " Sakari Ailus
2012-03-07 23:50         ` Laurent Pinchart
2012-03-09 18:44           ` [PATCH " Sakari Ailus
2012-03-09 20:31           ` [PATCH v5.3 " Sakari Ailus
2012-03-09 20:34             ` Laurent Pinchart
2012-03-08 17:05     ` Sakari Ailus
2012-03-07 10:50   ` [PATCH v5 " Laurent Pinchart
2012-03-07 15:24     ` Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 26/35] omap3isp: Add information on external subdev to struct isp_pipeline Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 27/35] omap3isp: Introduce isp_video_check_external_subdevs() Sakari Ailus
2012-03-07 10:43   ` Laurent Pinchart
2012-03-07 17:49     ` Sakari Ailus
2012-03-07 18:52       ` Laurent Pinchart
2012-03-07 23:57         ` Sakari Ailus
2012-03-08 17:04         ` [PATCH v5.3 " Sakari Ailus
2012-03-08 18:05           ` Laurent Pinchart
2012-03-07 18:14     ` [PATCH v5.1 " Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 28/35] omap3isp: Use external rate instead of vpcfg Sakari Ailus
2012-03-07 10:53   ` Laurent Pinchart
2012-03-07 17:54     ` Sakari Ailus
2012-03-07 18:34     ` Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 29/35] omap3isp: Default link validation for ccp2, csi2, preview and resizer Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 30/35] omap3isp: Move CCDC link validation to ccdc_link_validate() Sakari Ailus
2012-03-07 11:00   ` Laurent Pinchart
2012-03-07 18:02     ` Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 31/35] omap3isp: Configure CSI-2 phy based on platform data Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 32/35] omap3isp: Add resizer data rate configuration to resizer_link_validate Sakari Ailus
2012-03-07 11:01   ` Laurent Pinchart
2012-03-06 16:33 ` [PATCH v5 33/35] omap3isp: Find source pad from external entity Sakari Ailus
2012-03-07 11:04   ` Laurent Pinchart
2012-03-07 18:08     ` Sakari Ailus
2012-03-06 16:33 ` [PATCH v5 34/35] smiapp: Generic SMIA++/SMIA PLL calculator Sakari Ailus
2012-03-07 12:26   ` Laurent Pinchart
2012-03-08 13:29     ` Sakari Ailus
2012-03-08 13:57     ` [PATCH v5.1 " Sakari Ailus
2012-03-08 14:38       ` Laurent Pinchart
2012-03-08 14:48         ` Sakari Ailus
2012-03-08 14:49         ` [PATCH v5.2 " Sakari Ailus
2012-03-08 14:51           ` Laurent Pinchart
2012-03-08 13:57     ` [PATCH v5.1 35/35] smiapp: Add driver Sakari Ailus
2012-03-08 14:46       ` Laurent Pinchart
2012-03-08 16:49         ` [PATCH v5.3 " Sakari Ailus
2012-03-11 13:37           ` Laurent Pinchart
2012-03-11 14:03             ` Sakari Ailus
2012-03-11 14:45               ` [PATCH v5.4 " Sakari Ailus
2012-03-11 16:32                 ` Laurent Pinchart
2012-03-08 15:06       ` [PATCH v5.1 " jean-philippe francois
2012-03-11  9:04         ` Sakari Ailus
2012-03-12  9:44           ` jean-philippe francois
2012-03-06 16:33 ` [PATCH v5 35/35] rm680: Add camera init Sakari Ailus

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.