* Re: [parisc-linux] HP3000 928LX Support? (fwd)
@ 1999-09-01 17:09 Bill Katz (William)
1999-09-01 18:51 ` Grant Grundler
0 siblings, 1 reply; 3+ messages in thread
From: Bill Katz (William) @ 1999-09-01 17:09 UTC (permalink / raw)
To: parisc-linux
Grant Grundler wrote:
|Hugo van der Kooij wrote:
|> On Wed, 1 Sep 1999, Richard Muratti wrote:
|>
|> > I have the opportunity to acquire a HP3000 928LX server
|> > and would like to know if it is supported.
|>
|> HP3000 systems are not PA-RISC systems. They use the Motorola 68000 CPU
|> and you chould check the 68000 oport effort wether or not the unit may run
|> linux.
|
|[ I associate "HP3000" with the MPE products from CSY division]
|
|I can't speak for HP3000 products more than 5 years old.
|But recent HP3000 products are definitely PA-RISC.
|Firmware is different but many of the platform components
|are the same as K and T class machines.
|
|grant
HP3000s were NEVER 680x0 based. They were based on a proprietary 16 bit
stack-based architecture until about 1986. After that they were PA-RISC
systems. I'm pretty sure all that are identified with a 9xx number are
PA-risc. Earlier machines had 2 digit model numbers, i.e.. HP3000/68.
I saw recently in the news where HP was suing a used computer dealer that was
buying s800 HPUX machines, changing the bootROMS and making them into HP3000
s900 machines and selling them for more money.
I know very little about 9xx bootROMS, but there is a chance that Linux
will boot on it, since it doesn't check anytihing in the bootROM to see
if the BootROM forbids it from booting. MPE will not boot on s800s.
However the unit could be old enough that it has I/O cards based on the
CIO or NIO (aka HP -pricision) bus. It is unlikely anyone will ever bother
writing Linux drivers for those cards.
-Bill Katz
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [parisc-linux] HP3000 928LX Support? (fwd)
1999-09-01 17:09 [parisc-linux] HP3000 928LX Support? (fwd) Bill Katz (William)
@ 1999-09-01 18:51 ` Grant Grundler
0 siblings, 0 replies; 3+ messages in thread
From: Grant Grundler @ 1999-09-01 18:51 UTC (permalink / raw)
To: Bill Katz ; +Cc: parisc-linux
Bill Katz "(William)" wrote:
...
> However the unit could be old enough that it has I/O cards based on the
> CIO or NIO (aka HP -pricision) bus. It is unlikely anyone will ever bother
> writing Linux drivers for those cards.
The whole point of linux is to use what's cheap and available.
I would rather say:
It is unlikely anyone *in HP* will ever *get paid for* writing
Linux drivers for CIO or NIO cards.
However, if documentation isn't publicly available, it would be
pretty "challenging" for someone outside HP to do anything with HP-PB.
And someone in HP might actually be masochistic enough to make
parisc-linux boot/scan on NIO bus machines. ;^)
grant
Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [parisc-linux] HP3000 928LX Support? (fwd)
@ 1999-09-01 21:23 Bill Katz (William)
0 siblings, 0 replies; 3+ messages in thread
From: Bill Katz (William) @ 1999-09-01 21:23 UTC (permalink / raw)
To: parisc-linux
Stan Seiler wrote:
|> > > I have the opportunity to acquire a HP3000 928LX server
|> > > and would like to know if it is supported.
|> >
|> > HP3000 systems are not PA-RISC systems. They use the Motorola 68000 CPU
|...
|> Firmware is different but many of the platform components
|> are the same as K and T class machines.
|
|
|The HP 3000/928 is a PA-RISC system (48 MHz PA7100LC (PCX-L)),
|with HP-PB I/O (2 slots), 64 KB of integrated cache, floating point
|co-processor, and a max memory of 512 MB.
|
|It's 100% identical to the HP 9000 E25 (2-slot HP-PB model).
|
Oh, so it's a Wright Brothers :) In that case your luck ought to be
pretty good if you only care about:
1) Internal LASI based LAN and SCSI
2) RS232 connected console
It will never support graphics. But it's so close to a 712 that it should
certainly boot. And the suggestion taht you trade it for something
more closely resembling a workstation is certainly valid.
-Bill
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~1999-09-01 21:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-09-01 17:09 [parisc-linux] HP3000 928LX Support? (fwd) Bill Katz (William)
1999-09-01 18:51 ` Grant Grundler
-- strict thread matches above, loose matches on Subject: below --
1999-09-01 21:23 Bill Katz (William)
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.