All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: "Tian, Kevin" <kevin.tian@intel.com>,
	"iommu@lists.linux-foundation.org"
	<iommu@lists.linux-foundation.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Raj, Ashok" <ashok.raj@intel.com>
Subject: Re: [PATCH v2 4/4] iommu/vt-d: Add page response ops support
Date: Thu, 9 Jul 2020 08:32:57 +0800	[thread overview]
Message-ID: <1a8af358-80bb-3a92-3a26-906276bb772d@linux.intel.com> (raw)
In-Reply-To: <MWHPR11MB1645D608AF261AA7DE8FF6CE8C690@MWHPR11MB1645.namprd11.prod.outlook.com>

Hi Kevin,

On 7/6/20 9:47 AM, Tian, Kevin wrote:
>> From: Lu Baolu
>> Sent: Monday, July 6, 2020 8:26 AM
>>
>> After a page request is handled, software must response the device which
>> raised the page request with the handling result. This is done through
> 
> 'response' is a noun.

Yes.

> 
>> the iommu ops.page_response if the request was reported to outside of
>> vendor iommu driver through iommu_report_device_fault(). This adds the
>> VT-d implementation of page_response ops.
>>
>> Co-developed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
>> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
>> Co-developed-by: Liu Yi L <yi.l.liu@intel.com>
>> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
>> ---
>>   drivers/iommu/intel/iommu.c |  1 +
>>   drivers/iommu/intel/svm.c   | 74
>> +++++++++++++++++++++++++++++++++++++
>>   include/linux/intel-iommu.h |  3 ++
>>   3 files changed, 78 insertions(+)
>>
>> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
>> index de17952ed133..7eb29167e8f9 100644
>> --- a/drivers/iommu/intel/iommu.c
>> +++ b/drivers/iommu/intel/iommu.c
>> @@ -6057,6 +6057,7 @@ const struct iommu_ops intel_iommu_ops = {
>>   	.sva_bind		= intel_svm_bind,
>>   	.sva_unbind		= intel_svm_unbind,
>>   	.sva_get_pasid		= intel_svm_get_pasid,
>> +	.page_response		= intel_svm_page_response,
>>   #endif
>>   };
>>
>> diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
>> index 08c58c2b1a06..1c7d8a9ea124 100644
>> --- a/drivers/iommu/intel/svm.c
>> +++ b/drivers/iommu/intel/svm.c
>> @@ -1078,3 +1078,77 @@ int intel_svm_get_pasid(struct iommu_sva *sva)
>>
>>   	return pasid;
>>   }
>> +
>> +int intel_svm_page_response(struct device *dev,
>> +			    struct iommu_fault_event *evt,
>> +			    struct iommu_page_response *msg)
>> +{
>> +	struct iommu_fault_page_request *prm;
>> +	struct intel_svm_dev *sdev;
>> +	struct intel_iommu *iommu;
>> +	struct intel_svm *svm;
>> +	bool private_present;
>> +	bool pasid_present;
>> +	bool last_page;
>> +	u8 bus, devfn;
>> +	int ret = 0;
>> +	u16 sid;
>> +
>> +	if (!dev || !dev_is_pci(dev))
>> +		return -ENODEV;
> 
> but we didn't do same check when reporting fault?

For now, we only support PCI devices, so I will add this check in report
as well.

> 
>> +
>> +	iommu = device_to_iommu(dev, &bus, &devfn);
>> +	if (!iommu)
>> +		return -ENODEV;
>> +
>> +	if (!msg || !evt)
>> +		return -EINVAL;
>> +
>> +	mutex_lock(&pasid_mutex);
>> +
>> +	prm = &evt->fault.prm;
>> +	sid = PCI_DEVID(bus, devfn);
>> +	pasid_present = prm->flags &
>> IOMMU_FAULT_PAGE_REQUEST_PASID_VALID;
>> +	private_present = prm->flags &
>> IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA;
>> +	last_page = prm->flags &
>> IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE;
>> +
>> +	if (pasid_present) {
>> +		if (prm->pasid == 0 || prm->pasid >= PASID_MAX) {
>> +			ret = -EINVAL;
>> +			goto out;
>> +		}
>> +
>> +		ret = pasid_to_svm_sdev(dev, prm->pasid, &svm, &sdev);
>> +		if (ret || !sdev) {
>> +			ret = -ENODEV;
>> +			goto out;
>> +		}
>> +	}
> 
> what about pasid_present==0? Do we support recoverable fault now
> with this patch?

For now, we don't support reporting a prq without pasid to outside.
prq_event_thread() handles such requests explicitly. I will add a
check in response ops.

> 
> and who guarantees that the external fault handler (e.g. guest)
> cannot do bad thing with this interface, e.g. by specifying a PASID
> belonging to other guests (when Scalable IOV is enabled)?

I will check below if the response is from user space.

(svm->mm ==  get_task_mm(current))

> 
> Thanks
> Kevin

Best regards,
baolu

>> +
>> +	/*
>> +	 * Per VT-d spec. v3.0 ch7.7, system software must respond
>> +	 * with page group response if private data is present (PDP)
>> +	 * or last page in group (LPIG) bit is set. This is an
>> +	 * additional VT-d requirement beyond PCI ATS spec.
>> +	 */
>> +	if (last_page || private_present) {
>> +		struct qi_desc desc;
>> +
>> +		desc.qw0 = QI_PGRP_PASID(prm->pasid) | QI_PGRP_DID(sid)
>> |
>> +				QI_PGRP_PASID_P(pasid_present) |
>> +				QI_PGRP_PDP(private_present) |
>> +				QI_PGRP_RESP_CODE(msg->code) |
>> +				QI_PGRP_RESP_TYPE;
>> +		desc.qw1 = QI_PGRP_IDX(prm->grpid) |
>> QI_PGRP_LPIG(last_page);
>> +		desc.qw2 = 0;
>> +		desc.qw3 = 0;
>> +		if (private_present)
>> +			memcpy(&desc.qw2, prm->private_data,
>> +			       sizeof(prm->private_data));
>> +
>> +		qi_submit_sync(iommu, &desc, 1, 0);
>> +	}
>> +out:
>> +	mutex_unlock(&pasid_mutex);
>> +	return ret;
>> +}
>> diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
>> index fc2cfc3db6e1..bf6009a344f5 100644
>> --- a/include/linux/intel-iommu.h
>> +++ b/include/linux/intel-iommu.h
>> @@ -741,6 +741,9 @@ struct iommu_sva *intel_svm_bind(struct device
>> *dev, struct mm_struct *mm,
>>   				 void *drvdata);
>>   void intel_svm_unbind(struct iommu_sva *handle);
>>   int intel_svm_get_pasid(struct iommu_sva *handle);
>> +int intel_svm_page_response(struct device *dev, struct iommu_fault_event
>> *evt,
>> +			    struct iommu_page_response *msg);
>> +
>>   struct svm_dev_ops;
>>
>>   struct intel_svm_dev {
>> --
>> 2.17.1
>>
>> _______________________________________________
>> iommu mailing list
>> iommu@lists.linux-foundation.org
>> https://lists.linuxfoundation.org/mailman/listinfo/iommu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

WARNING: multiple messages have this Message-ID (diff)
From: Lu Baolu <baolu.lu@linux.intel.com>
To: "Tian, Kevin" <kevin.tian@intel.com>,
	"iommu@lists.linux-foundation.org"
	<iommu@lists.linux-foundation.org>
Cc: baolu.lu@linux.intel.com, "Raj, Ashok" <ashok.raj@intel.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 4/4] iommu/vt-d: Add page response ops support
Date: Thu, 9 Jul 2020 08:32:57 +0800	[thread overview]
Message-ID: <1a8af358-80bb-3a92-3a26-906276bb772d@linux.intel.com> (raw)
In-Reply-To: <MWHPR11MB1645D608AF261AA7DE8FF6CE8C690@MWHPR11MB1645.namprd11.prod.outlook.com>

Hi Kevin,

On 7/6/20 9:47 AM, Tian, Kevin wrote:
>> From: Lu Baolu
>> Sent: Monday, July 6, 2020 8:26 AM
>>
>> After a page request is handled, software must response the device which
>> raised the page request with the handling result. This is done through
> 
> 'response' is a noun.

Yes.

> 
>> the iommu ops.page_response if the request was reported to outside of
>> vendor iommu driver through iommu_report_device_fault(). This adds the
>> VT-d implementation of page_response ops.
>>
>> Co-developed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
>> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
>> Co-developed-by: Liu Yi L <yi.l.liu@intel.com>
>> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
>> ---
>>   drivers/iommu/intel/iommu.c |  1 +
>>   drivers/iommu/intel/svm.c   | 74
>> +++++++++++++++++++++++++++++++++++++
>>   include/linux/intel-iommu.h |  3 ++
>>   3 files changed, 78 insertions(+)
>>
>> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
>> index de17952ed133..7eb29167e8f9 100644
>> --- a/drivers/iommu/intel/iommu.c
>> +++ b/drivers/iommu/intel/iommu.c
>> @@ -6057,6 +6057,7 @@ const struct iommu_ops intel_iommu_ops = {
>>   	.sva_bind		= intel_svm_bind,
>>   	.sva_unbind		= intel_svm_unbind,
>>   	.sva_get_pasid		= intel_svm_get_pasid,
>> +	.page_response		= intel_svm_page_response,
>>   #endif
>>   };
>>
>> diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
>> index 08c58c2b1a06..1c7d8a9ea124 100644
>> --- a/drivers/iommu/intel/svm.c
>> +++ b/drivers/iommu/intel/svm.c
>> @@ -1078,3 +1078,77 @@ int intel_svm_get_pasid(struct iommu_sva *sva)
>>
>>   	return pasid;
>>   }
>> +
>> +int intel_svm_page_response(struct device *dev,
>> +			    struct iommu_fault_event *evt,
>> +			    struct iommu_page_response *msg)
>> +{
>> +	struct iommu_fault_page_request *prm;
>> +	struct intel_svm_dev *sdev;
>> +	struct intel_iommu *iommu;
>> +	struct intel_svm *svm;
>> +	bool private_present;
>> +	bool pasid_present;
>> +	bool last_page;
>> +	u8 bus, devfn;
>> +	int ret = 0;
>> +	u16 sid;
>> +
>> +	if (!dev || !dev_is_pci(dev))
>> +		return -ENODEV;
> 
> but we didn't do same check when reporting fault?

For now, we only support PCI devices, so I will add this check in report
as well.

> 
>> +
>> +	iommu = device_to_iommu(dev, &bus, &devfn);
>> +	if (!iommu)
>> +		return -ENODEV;
>> +
>> +	if (!msg || !evt)
>> +		return -EINVAL;
>> +
>> +	mutex_lock(&pasid_mutex);
>> +
>> +	prm = &evt->fault.prm;
>> +	sid = PCI_DEVID(bus, devfn);
>> +	pasid_present = prm->flags &
>> IOMMU_FAULT_PAGE_REQUEST_PASID_VALID;
>> +	private_present = prm->flags &
>> IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA;
>> +	last_page = prm->flags &
>> IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE;
>> +
>> +	if (pasid_present) {
>> +		if (prm->pasid == 0 || prm->pasid >= PASID_MAX) {
>> +			ret = -EINVAL;
>> +			goto out;
>> +		}
>> +
>> +		ret = pasid_to_svm_sdev(dev, prm->pasid, &svm, &sdev);
>> +		if (ret || !sdev) {
>> +			ret = -ENODEV;
>> +			goto out;
>> +		}
>> +	}
> 
> what about pasid_present==0? Do we support recoverable fault now
> with this patch?

For now, we don't support reporting a prq without pasid to outside.
prq_event_thread() handles such requests explicitly. I will add a
check in response ops.

> 
> and who guarantees that the external fault handler (e.g. guest)
> cannot do bad thing with this interface, e.g. by specifying a PASID
> belonging to other guests (when Scalable IOV is enabled)?

I will check below if the response is from user space.

(svm->mm ==  get_task_mm(current))

> 
> Thanks
> Kevin

Best regards,
baolu

>> +
>> +	/*
>> +	 * Per VT-d spec. v3.0 ch7.7, system software must respond
>> +	 * with page group response if private data is present (PDP)
>> +	 * or last page in group (LPIG) bit is set. This is an
>> +	 * additional VT-d requirement beyond PCI ATS spec.
>> +	 */
>> +	if (last_page || private_present) {
>> +		struct qi_desc desc;
>> +
>> +		desc.qw0 = QI_PGRP_PASID(prm->pasid) | QI_PGRP_DID(sid)
>> |
>> +				QI_PGRP_PASID_P(pasid_present) |
>> +				QI_PGRP_PDP(private_present) |
>> +				QI_PGRP_RESP_CODE(msg->code) |
>> +				QI_PGRP_RESP_TYPE;
>> +		desc.qw1 = QI_PGRP_IDX(prm->grpid) |
>> QI_PGRP_LPIG(last_page);
>> +		desc.qw2 = 0;
>> +		desc.qw3 = 0;
>> +		if (private_present)
>> +			memcpy(&desc.qw2, prm->private_data,
>> +			       sizeof(prm->private_data));
>> +
>> +		qi_submit_sync(iommu, &desc, 1, 0);
>> +	}
>> +out:
>> +	mutex_unlock(&pasid_mutex);
>> +	return ret;
>> +}
>> diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
>> index fc2cfc3db6e1..bf6009a344f5 100644
>> --- a/include/linux/intel-iommu.h
>> +++ b/include/linux/intel-iommu.h
>> @@ -741,6 +741,9 @@ struct iommu_sva *intel_svm_bind(struct device
>> *dev, struct mm_struct *mm,
>>   				 void *drvdata);
>>   void intel_svm_unbind(struct iommu_sva *handle);
>>   int intel_svm_get_pasid(struct iommu_sva *handle);
>> +int intel_svm_page_response(struct device *dev, struct iommu_fault_event
>> *evt,
>> +			    struct iommu_page_response *msg);
>> +
>>   struct svm_dev_ops;
>>
>>   struct intel_svm_dev {
>> --
>> 2.17.1
>>
>> _______________________________________________
>> iommu mailing list
>> iommu@lists.linux-foundation.org
>> https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply	other threads:[~2020-07-09  0:37 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-06  0:25 [PATCH v2 0/4] iommu/vt-d: Add prq report and response support Lu Baolu
2020-07-06  0:25 ` Lu Baolu
2020-07-06  0:25 ` [PATCH v2 1/4] iommu/vt-d: Refactor device_to_iommu() helper Lu Baolu
2020-07-06  0:25   ` Lu Baolu
2020-07-06  1:02   ` Tian, Kevin
2020-07-06  1:02     ` Tian, Kevin
2020-07-06  0:25 ` [PATCH v2 2/4] iommu/vt-d: Add a helper to get svm and sdev for pasid Lu Baolu
2020-07-06  0:25   ` Lu Baolu
2020-07-06  1:10   ` Tian, Kevin
2020-07-06  1:10     ` Tian, Kevin
2020-07-06  0:25 ` [PATCH v2 3/4] iommu/vt-d: Report page request faults for guest SVA Lu Baolu
2020-07-06  0:25   ` Lu Baolu
2020-07-06  1:29   ` Tian, Kevin
2020-07-06  1:29     ` Tian, Kevin
2020-07-06  7:37     ` Lu Baolu
2020-07-06  7:37       ` Lu Baolu
2020-07-06  1:36   ` Tian, Kevin
2020-07-06  1:36     ` Tian, Kevin
2020-07-06  7:47     ` Lu Baolu
2020-07-06  7:47       ` Lu Baolu
2020-07-07 11:23   ` Jean-Philippe Brucker
2020-07-07 11:23     ` Jean-Philippe Brucker
2020-07-08  2:13     ` Lu Baolu
2020-07-08  2:13       ` Lu Baolu
2020-07-06  0:25 ` [PATCH v2 4/4] iommu/vt-d: Add page response ops support Lu Baolu
2020-07-06  0:25   ` Lu Baolu
2020-07-06  1:47   ` Tian, Kevin
2020-07-06  1:47     ` Tian, Kevin
2020-07-09  0:32     ` Lu Baolu [this message]
2020-07-09  0:32       ` Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1a8af358-80bb-3a92-3a26-906276bb772d@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=ashok.raj@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.