* [PATCH 2/6] drm: remove the package Makefile and replace it with the kernel Makefile
@ 2011-01-24 4:23 Tom Zanussi
0 siblings, 0 replies; only message in thread
From: Tom Zanussi @ 2011-01-24 4:23 UTC (permalink / raw)
To: poky, bruce.ashfield
The default Makefile is meant for building the modules externally.
Replace it with the normal kernel Makefile (Makefile.kernel).
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
---
drivers/gpu/drm-psb/Makefile | 433 ++++++-----------------------------
drivers/gpu/drm-psb/Makefile.kernel | 76 ------
2 files changed, 71 insertions(+), 438 deletions(-)
delete mode 100644 drivers/gpu/drm-psb/Makefile.kernel
diff --git a/drivers/gpu/drm-psb/Makefile b/drivers/gpu/drm-psb/Makefile
index ffb397e..702bf28 100644
--- a/drivers/gpu/drm-psb/Makefile
+++ b/drivers/gpu/drm-psb/Makefile
@@ -1,367 +1,76 @@
-# Makefile -- For the Direct Rendering Manager module (drm)
#
-# Based on David Woodhouse's mtd build.
-#
-# Modified to handle the DRM requirements and builds on a wider range of
-# platforms in a flexible way by David Dawes. It's not clear, however,
-# that this approach is simpler than the old one.
-#
-# The purpose of this Makefile is to handle setting up everything
-# needed for an out-of-kernel source build. Makefile.kernel contains
-# everything required for in-kernel source builds. It is included into
-# this file, so none of that should be duplicated here.
-#
-# $XFree86: xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/Makefile.linux,v 1.40 2003/08/17 17:12:25 dawes Exp $
-#
-
-#
-# By default, the build is done against the running linux kernel source.
-# To build against a different kernel source tree, set LINUXDIR:
-#
-# make LINUXDIR=/path/to/kernel/source
-
-#
-# To build only some modules, either set DRM_MODULES to the list of modules,
-# or specify the modules as targets:
+# Makefile for the drm device driver. This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
-# make r128.o radeon.o
-#
-# or:
+# Based on David Woodhouse's mtd build.
#
-# make DRM_MODULES="r128 radeon"
+# $XFree86: xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/Makefile.kernel,v 1.18 2003/08/16 17:59:17 dawes Exp $
#
-SHELL=/bin/sh
-
-.SUFFIXES:
-
-ifndef LINUXDIR
-RUNNING_REL := $(shell uname -r)
-
-LINUXDIR := $(shell if [ -e /lib/modules/$(RUNNING_REL)/source ]; then \
- echo /lib/modules/$(RUNNING_REL)/source; \
- else echo /lib/modules/$(RUNNING_REL)/build; fi)
-endif
-
-ifndef O
-O := $(shell if [ -e /lib/modules/$(RUNNING_REL)/build ]; then \
- echo /lib/modules/$(RUNNING_REL)/build; \
- else echo ""; fi)
-#O := $(LINUXDIR)
-endif
-
-ifdef ARCH
-MACHINE := $(ARCH)
-else
-MACHINE := $(shell uname -m)
-endif
-
-# Modules for all architectures
-MODULE_LIST := drm.o tdfx.o r128.o radeon.o mga.o sis.o savage.o via.o \
- mach64.o nv.o nouveau.o psb.o xgi.o
-
-# Modules only for ix86 architectures
-ifneq (,$(findstring 86,$(MACHINE)))
-ARCHX86 := 1
-MODULE_LIST += i810.o i915.o
-endif
-
-ifneq (,$(findstring sparc64,$(MACHINE)))
-ARCHSPARC64 := 1
-#MODULE_LIST += ffb.o
-endif
-
-DRM_MODULES ?= $(MODULE_LIST)
-
-# These definitions are for handling dependencies in the out of kernel build.
-
-DRMHEADERS = drmP.h drm_compat.h drm_os_linux.h drm.h drm_sarea.h
-COREHEADERS = drm_core.h drm_sman.h drm_hashtab.h
-
-TDFXHEADERS = tdfx_drv.h $(DRMHEADERS)
-R128HEADERS = r128_drv.h r128_drm.h $(DRMHEADERS)
-RADEONHEADERS = radeon_drv.h radeon_drm.h r300_reg.h $(DRMHEADERS)
-MGAHEADERS = mga_drv.h mga_drm.h mga_ucode.h $(DRMHEADERS)
-I810HEADERS = i810_drv.h i810_drm.h $(DRMHEADERS)
-I915HEADERS = i915_drv.h i915_drm.h $(DRMHEADERS)
-SISHEADERS= sis_drv.h sis_drm.h drm_hashtab.h drm_sman.h $(DRMHEADERS)
-SAVAGEHEADERS= savage_drv.h savage_drm.h $(DRMHEADERS)
-VIAHEADERS = via_drm.h via_drv.h via_3d_reg.h via_verifier.h $(DRMHEADERS)
-MACH64HEADERS = mach64_drv.h mach64_drm.h $(DRMHEADERS)
-NVHEADERS = nv_drv.h $(DRMHEADERS)
-FFBHEADERS = ffb_drv.h $(DRMHEADERS)
-NOUVEAUHEADERS = nouveau_drv.h nouveau_drm.h nouveau_reg.h $(DRMHEADERS)
-PSBHEADERS= psb_drv.h psb_drm.h psb_reg.h psb_kreg.h psb_scene.h \
- psb_schedule.h psb_detear.h $(DRMHEADERS)
-XGIHEADERS = xgi_cmdlist.h xgi_drv.h xgi_misc.h xgi_regs.h $(DRMHEADERS)
-
-PROGS = dristat drmstat
-
-CLEANFILES = *.o *.ko $(PROGS) .depend .*.flags .*.d .*.cmd *.mod.c .tmp_versions
-
-# VERSION is not defined from the initial invocation. It is defined when
-# this Makefile is invoked from the kernel's root Makefile.
-
-ifndef VERSION
-
-ifdef RUNNING_REL
-
-# SuSE has the version.h and autoconf.h headers for the current kernel
-# in /boot as /boot/vmlinuz.version.h and /boot/vmlinuz.autoconf.h.
-# Check these first to see if they match the running kernel.
-
-BOOTVERSION_PREFIX = /boot/vmlinuz.
-
-V := $(shell if [ -f $(BOOTVERSION_PREFIX)version.h ]; then \
- grep UTS_RELEASE $(BOOTVERSION_PREFIX)version.h | \
- cut -d' ' -f3; fi)
-
-ifeq ($(V),"$(RUNNING_REL)")
-HEADERFROMBOOT := 1
-GETCONFIG := MAKEFILES=$(shell pwd)/.config
-HAVECONFIG := y
-endif
-
-# On Red Hat we need to check if there is a .config file in the kernel
-# source directory. If there isn't, we need to check if there's a
-# matching file in the configs subdirectory.
-
-ifneq ($(HAVECONFIG),y)
-HAVECONFIG := $(shell if [ -e $(LINUXDIR)/.config ]; then echo y; fi)
-endif
-
-ifneq ($(HAVECONFIG),y)
-REL_BASE := $(shell echo $(RUNNING_REL) | sed 's/-.*//')
-REL_TYPE := $(shell echo $(RUNNING_REL) | sed 's/[0-9.-]//g')
-ifeq ($(REL_TYPE),)
-RHCONFIG := configs/kernel-$(REL_BASE)-$(MACHINE).config
-else
-RHCONFIG := configs/kernel-$(REL_BASE)-$(MACHINE)-$(REL_TYPE).config
-endif
-HAVECONFIG := $(shell if [ -e $(LINUXDIR)/$(RHCONFIG) ]; then echo y; fi)
-ifneq ($(HAVECONFIG),y)
-RHCONFIG :=
-endif
-endif
-
-ifneq ($(HAVECONFIG),y)
-ifneq ($(0),$(LINUXDIR))
-GETCONFIG += O=$(O)
-endif
-HAVECONFIG := $(shell if [ -e $(O)/.config ]; then echo y; fi)
-endif
-
-ifneq ($(HAVECONFIG),y)
-$(error Cannot find a kernel config file)
-endif
-
-endif
-
-CLEANCONFIG := $(shell if cmp -s $(LINUXDIR)/.config .config; then echo y; fi)
-ifeq ($(CLEANCONFIG),y)
-CLEANFILES += $(LINUXDIR)/.config .config $(LINUXDIR)/tmp_include_depends
-endif
-
-all: modules
-
-modules: includes
- +make -C $(LINUXDIR) $(GETCONFIG) SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
-
-ifeq ($(HEADERFROMBOOT),1)
-
-BOOTHEADERS = version.h autoconf.h
-BOOTCONFIG = .config
-
-CLEANFILES += $(BOOTHEADERS) $(BOOTCONFIG)
-
-includes:: $(BOOTHEADERS) $(BOOTCONFIG)
-
-version.h: $(BOOTVERSION_PREFIX)version.h
- rm -f $@
- ln -s $< $@
-
-autoconf.h: $(BOOTVERSION_PREFIX)autoconf.h
- rm -f $@
- ln -s $< $@
-
-.config: $(BOOTVERSION_PREFIX)config
- rm -f $@
- ln -s $< $@
-endif
-
-# This prepares an unused Red Hat kernel tree for the build.
-ifneq ($(RHCONFIG),)
-includes:: $(LINUXDIR)/.config $(LINUXDIR)/tmp_include_depends .config
-
-$(LINUXDIR)/.config: $(LINUXDIR)/$(RHCONFIG)
- rm -f $@
- ln -s $< $@
-
-.config: $(LINUXDIR)/$(RHCONFIG)
- rm -f $@
- ln -s $< $@
-
-$(LINUXDIR)/tmp_include_depends:
- echo all: > $@
-endif
-
-# Make sure that the shared source files are linked into this directory.
-
-
-SHAREDDIR := .
-
-ifeq ($(shell if [ -d $(SHAREDDIR) ]; then echo y; fi),y)
-includes:: drm_pciids.h
-
-drm_pciids.h: $(SHAREDDIR)/drm_pciids.txt
- sh ./create_linux_pci_lists.sh < $(SHAREDDIR)/drm_pciids.txt
-else
-includes::
-
-endif
-
-clean cleandir:
- rm -rf $(CLEANFILES)
-
-$(MODULE_LIST)::
- make DRM_MODULES=$@ modules
-
-# Build test utilities
-
-PRGCFLAGS = $(CFLAGS) -g -ansi -pedantic -DPOSIX_C_SOURCE=199309L \
- -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_BSD_SOURCE -D_SVID_SOURCE \
- -I. -I../../..
-
-DRMSTATLIBS = -L../../.. -L.. -ldrm -lxf86_os \
- -L../../../../dummylib -ldummy -lm
-
-programs: $(PROGS)
-
-dristat: dristat.c
- $(CC) $(PRGCFLAGS) $< -o $@
-
-drmstat: drmstat.c
- $(CC) $(PRGCFLAGS) $< -o $@ $(DRMSTATLIBS)
-
-install:
- make -C $(LINUXDIR) $(GETCONFIG) SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules_install
-
-else
-
-# Check for kernel versions that we don't support.
-
-BELOW26 := $(shell if [ $(VERSION) -lt 2 -o $(PATCHLEVEL) -lt 6 ]; then \
- echo y; fi)
-
-ifeq ($(BELOW26),y)
-$(error Only 2.6.x and later kernels are supported \
- ($(VERSION).$(PATCHLEVEL).$(SUBLEVEL)))
-endif
-
-ifdef ARCHX86
-ifndef CONFIG_X86_CMPXCHG
-$(error CONFIG_X86_CMPXCHG needs to be enabled in the kernel)
-endif
-endif
-
-# This needs to go before all other include paths.
-CC += -I$(DRMSRCDIR)
-
-# Check for PAGE_AGP definition
-PAGE_AGP := $(shell cat $(LINUXDIR)/include/asm/agp.h 2>/dev/null | \
- grep -c PAGE_AGP)
-
-ifneq ($(PAGE_AGP),0)
-EXTRA_CFLAGS += -DHAVE_PAGE_AGP
-endif
-
-# Start with all modules turned off.
-CONFIG_DRM_GAMMA := n
-CONFIG_DRM_TDFX := n
-CONFIG_DRM_MGA := n
-CONFIG_DRM_I810 := n
-CONFIG_DRM_R128 := n
-CONFIG_DRM_RADEON := n
-CONFIG_DRM_I915 := n
-CONFIG_DRM_SIS := n
-CONFIG_DRM_FFB := n
-CONFIG_DRM_SAVAGE := n
-CONFIG_DRM_VIA := n
-CONFIG_DRM_MACH64 := n
-CONFIG_DRM_NV := n
-CONFIG_DRM_NOUVEAU := n
-CONFIG_DRM_PSB := n
-CONFIG_DRM_XGI := n
-
-# Enable module builds for the modules requested/supported.
-
-ifneq (,$(findstring tdfx,$(DRM_MODULES)))
-CONFIG_DRM_TDFX := m
-endif
-ifneq (,$(findstring r128,$(DRM_MODULES)))
-CONFIG_DRM_R128 := m
-endif
-ifneq (,$(findstring radeon,$(DRM_MODULES)))
-CONFIG_DRM_RADEON := m
-endif
-ifneq (,$(findstring sis,$(DRM_MODULES)))
-CONFIG_DRM_SIS := m
-endif
-ifneq (,$(findstring via,$(DRM_MODULES)))
-CONFIG_DRM_VIA := m
-endif
-ifneq (,$(findstring mach64,$(DRM_MODULES)))
-CONFIG_DRM_MACH64 := m
-endif
-ifneq (,$(findstring ffb,$(DRM_MODULES)))
-CONFIG_DRM_FFB := m
-endif
-ifneq (,$(findstring savage,$(DRM_MODULES)))
-CONFIG_DRM_SAVAGE := m
-endif
-ifneq (,$(findstring mga,$(DRM_MODULES)))
-CONFIG_DRM_MGA := m
-endif
-ifneq (,$(findstring nv,$(DRM_MODULES)))
-CONFIG_DRM_NV := m
-endif
-ifneq (,$(findstring nouveau,$(DRM_MODULES)))
-CONFIG_DRM_NOUVEAU := m
-endif
-ifneq (,$(findstring xgi,$(DRM_MODULES)))
-CONFIG_DRM_XGI := m
-endif
-
-# These require AGP support
-
-ifneq (,$(findstring i810,$(DRM_MODULES)))
-CONFIG_DRM_I810 := m
-endif
-ifneq (,$(findstring i915,$(DRM_MODULES)))
-CONFIG_DRM_I915 := m
-endif
-ifneq (,$(findstring psb,$(DRM_MODULES)))
-CONFIG_DRM_PSB := m
-endif
-include $(DRMSRCDIR)/Makefile.kernel
-
-# Depencencies
-$(drm-objs): $(DRMHEADERS) $(COREHEADERS)
-$(tdfx-objs): $(TDFXHEADERS)
-$(r128-objs): $(R128HEADERS)
-$(mga-objs): $(MGAHEADERS)
-$(i810-objs): $(I810HEADERS)
-$(i915-objs): $(I915HEADERS)
-$(radeon-objs): $(RADEONHEADERS)
-$(sis-objs): $(SISHEADERS)
-$(ffb-objs): $(FFBHEADERS)
-$(savage-objs): $(SAVAGEHEADERS)
-$(via-objs): $(VIAHEADERS)
-$(mach64-objs): $(MACH64HEADERS)
-$(nv-objs): $(NVHEADERS)
-$(nouveau-objs): $(NOUVEAUHEADERS)
-$(psb-objs): $(PSBHEADERS)
-$(xgi-objs): $(XGIHEADERS)
-
-endif
-
+drm-objs := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \
+ drm_drv.o drm_fops.o drm_ioctl.o drm_irq.o \
+ drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
+ drm_sysfs.o drm_pci.o drm_agpsupport.o drm_scatter.o \
+ drm_memory_debug.o ati_pcigart.o drm_sman.o \
+ drm_hashtab.o drm_mm.o drm_object.o drm_compat.o \
+ drm_fence.o drm_ttm.o drm_bo.o drm_bo_move.o drm_crtc.o \
+ drm_edid.o drm_modes.o drm_bo_lock.o drm_regman.o drm_vm_nopage_compat.o
+tdfx-objs := tdfx_drv.o
+r128-objs := r128_drv.o r128_cce.o r128_state.o r128_irq.o
+mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o
+i810-objs := i810_drv.o i810_dma.o
+i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_fence.o \
+ i915_buffer.o intel_setup.o intel_i2c.o i915_init.o intel_fb.o \
+ i915_compat.o
+nouveau-objs := nouveau_drv.o nouveau_state.o nouveau_fifo.o nouveau_mem.o \
+ nouveau_object.o nouveau_irq.o nouveau_notifier.o nouveau_swmthd.o \
+ nouveau_sgdma.o nouveau_dma.o nouveau_buffer.o nouveau_fence.o \
+ nv04_timer.o \
+ nv04_mc.o nv40_mc.o nv50_mc.o \
+ nv04_fb.o nv10_fb.o nv40_fb.o \
+ nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \
+ nv04_graph.o nv10_graph.o nv20_graph.o \
+ nv40_graph.o nv50_graph.o \
+ nv04_instmem.o nv50_instmem.o
+radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o radeon_fence.o radeon_buffer.o
+sis-objs := sis_drv.o sis_mm.o
+ffb-objs := ffb_drv.o ffb_context.o
+savage-objs := savage_drv.o savage_bci.o savage_state.o
+via-objs := via_irq.o via_drv.o via_map.o via_mm.o via_dma.o via_verifier.o \
+ via_video.o via_dmablit.o via_fence.o via_buffer.o
+mach64-objs := mach64_drv.o mach64_dma.o mach64_irq.o mach64_state.o
+nv-objs := nv_drv.o
+psb-objs := psb_drv.o psb_mmu.o psb_sgx.o psb_irq.o psb_fence.o \
+ psb_buffer.o psb_gtt.o psb_setup.o psb_i2c.o psb_fb.o \
+ psb_schedule.o psb_scene.o psb_reset.o \
+ psb_regman.o psb_xhw.o psb_msvdx.o psb_msvdxinit.o \
+ psb_detear.o
+xgi-objs := xgi_cmdlist.o xgi_drv.o xgi_fb.o xgi_misc.o xgi_pcie.o \
+ xgi_fence.o
+
+ifeq ($(CONFIG_COMPAT),y)
+drm-objs += drm_ioc32.o
+radeon-objs += radeon_ioc32.o
+mga-objs += mga_ioc32.o
+r128-objs += r128_ioc32.o
+i915-objs += i915_ioc32.o
+nouveau-objs += nouveau_ioc32.o
+xgi-objs += xgi_ioc32.o
+endif
+
+obj-m += drm.o
+obj-$(CONFIG_DRM_TDFX) += tdfx.o
+obj-$(CONFIG_DRM_R128) += r128.o
+obj-$(CONFIG_DRM_RADEON)+= radeon.o
+obj-$(CONFIG_DRM_MGA) += mga.o
+obj-$(CONFIG_DRM_I810) += i810.o
+obj-$(CONFIG_DRM_I915) += i915.o
+obj-$(CONFIG_DRM_SIS) += sis.o
+obj-$(CONFIG_DRM_FFB) += ffb.o
+obj-$(CONFIG_DRM_SAVAGE)+= savage.o
+obj-$(CONFIG_DRM_VIA) += via.o
+obj-$(CONFIG_DRM_MACH64)+= mach64.o
+obj-$(CONFIG_DRM_NV) += nv.o
+obj-$(CONFIG_DRM_NOUVEAU) += nouveau.o
+obj-$(CONFIG_DRM_PSB) += psb.o
+obj-$(CONFIG_DRM_XGI) += xgi.o
diff --git a/drivers/gpu/drm-psb/Makefile.kernel b/drivers/gpu/drm-psb/Makefile.kernel
deleted file mode 100644
index 702bf28..0000000
--- a/drivers/gpu/drm-psb/Makefile.kernel
+++ /dev/null
@@ -1,76 +0,0 @@
-#
-# Makefile for the drm device driver. This driver provides support for the
-# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
-#
-# Based on David Woodhouse's mtd build.
-#
-# $XFree86: xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/Makefile.kernel,v 1.18 2003/08/16 17:59:17 dawes Exp $
-#
-
-drm-objs := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \
- drm_drv.o drm_fops.o drm_ioctl.o drm_irq.o \
- drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
- drm_sysfs.o drm_pci.o drm_agpsupport.o drm_scatter.o \
- drm_memory_debug.o ati_pcigart.o drm_sman.o \
- drm_hashtab.o drm_mm.o drm_object.o drm_compat.o \
- drm_fence.o drm_ttm.o drm_bo.o drm_bo_move.o drm_crtc.o \
- drm_edid.o drm_modes.o drm_bo_lock.o drm_regman.o drm_vm_nopage_compat.o
-tdfx-objs := tdfx_drv.o
-r128-objs := r128_drv.o r128_cce.o r128_state.o r128_irq.o
-mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o
-i810-objs := i810_drv.o i810_dma.o
-i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_fence.o \
- i915_buffer.o intel_setup.o intel_i2c.o i915_init.o intel_fb.o \
- i915_compat.o
-nouveau-objs := nouveau_drv.o nouveau_state.o nouveau_fifo.o nouveau_mem.o \
- nouveau_object.o nouveau_irq.o nouveau_notifier.o nouveau_swmthd.o \
- nouveau_sgdma.o nouveau_dma.o nouveau_buffer.o nouveau_fence.o \
- nv04_timer.o \
- nv04_mc.o nv40_mc.o nv50_mc.o \
- nv04_fb.o nv10_fb.o nv40_fb.o \
- nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \
- nv04_graph.o nv10_graph.o nv20_graph.o \
- nv40_graph.o nv50_graph.o \
- nv04_instmem.o nv50_instmem.o
-radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o radeon_fence.o radeon_buffer.o
-sis-objs := sis_drv.o sis_mm.o
-ffb-objs := ffb_drv.o ffb_context.o
-savage-objs := savage_drv.o savage_bci.o savage_state.o
-via-objs := via_irq.o via_drv.o via_map.o via_mm.o via_dma.o via_verifier.o \
- via_video.o via_dmablit.o via_fence.o via_buffer.o
-mach64-objs := mach64_drv.o mach64_dma.o mach64_irq.o mach64_state.o
-nv-objs := nv_drv.o
-psb-objs := psb_drv.o psb_mmu.o psb_sgx.o psb_irq.o psb_fence.o \
- psb_buffer.o psb_gtt.o psb_setup.o psb_i2c.o psb_fb.o \
- psb_schedule.o psb_scene.o psb_reset.o \
- psb_regman.o psb_xhw.o psb_msvdx.o psb_msvdxinit.o \
- psb_detear.o
-xgi-objs := xgi_cmdlist.o xgi_drv.o xgi_fb.o xgi_misc.o xgi_pcie.o \
- xgi_fence.o
-
-ifeq ($(CONFIG_COMPAT),y)
-drm-objs += drm_ioc32.o
-radeon-objs += radeon_ioc32.o
-mga-objs += mga_ioc32.o
-r128-objs += r128_ioc32.o
-i915-objs += i915_ioc32.o
-nouveau-objs += nouveau_ioc32.o
-xgi-objs += xgi_ioc32.o
-endif
-
-obj-m += drm.o
-obj-$(CONFIG_DRM_TDFX) += tdfx.o
-obj-$(CONFIG_DRM_R128) += r128.o
-obj-$(CONFIG_DRM_RADEON)+= radeon.o
-obj-$(CONFIG_DRM_MGA) += mga.o
-obj-$(CONFIG_DRM_I810) += i810.o
-obj-$(CONFIG_DRM_I915) += i915.o
-obj-$(CONFIG_DRM_SIS) += sis.o
-obj-$(CONFIG_DRM_FFB) += ffb.o
-obj-$(CONFIG_DRM_SAVAGE)+= savage.o
-obj-$(CONFIG_DRM_VIA) += via.o
-obj-$(CONFIG_DRM_MACH64)+= mach64.o
-obj-$(CONFIG_DRM_NV) += nv.o
-obj-$(CONFIG_DRM_NOUVEAU) += nouveau.o
-obj-$(CONFIG_DRM_PSB) += psb.o
-obj-$(CONFIG_DRM_XGI) += xgi.o
--
1.7.0.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2011-01-24 4:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-24 4:23 [PATCH 2/6] drm: remove the package Makefile and replace it with the kernel Makefile Tom Zanussi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.