[Bluez-devel] About new hardware testing

[Bluez-devel] About new hardware testing

[Mike Lee]

Dear All
    I am now testing new hardware in ARM9 platform with CSR bluetooth
module. After i hciattach with 921600 baud rate, I can see the Build
ID of CSR. But when i use hciconfig, i can not see any device.
     Could anybody suggest me a way to find out the hardware error. Is
there any debug version of bluez util?

Thank a lot
best regard
-- 
-------------------------------------------------------
Mike Lee


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] About new hardware testing

[Peter Wippich]

Hi Mike,

have you started hcid ?? Or do  "hciconfig hci0 up".

Ciao,

Peter


On Sun, 20 Feb 2005, Mike Lee wrote:

> Dear All
>     I am now testing new hardware in ARM9 platform with CSR bluetooth
> module. After i hciattach with 921600 baud rate, I can see the Build
> ID of CSR. But when i use hciconfig, i can not see any device.
>      Could anybody suggest me a way to find out the hardware error. Is
> there any debug version of bluez util?
>
> Thank a lot
> best regard
> --
> -------------------------------------------------------
> Mike Lee
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>

|	Peter Wippich 			Voice: +49 30 46776411		|
|	G&W Instruments GmbH		fax:   +49 30 46776419		|
|	Gustav-Meyer-Allee 25, Geb. 12	Email: pewi@gw-instruments.de	|
|	D-13355 Berlin  / Germany					|




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] About new hardware testing

[Mike Lee]

Dear Peter

   Yes, i have done that.

best regard
Mike,Lee


On Sun, 20 Feb 2005 16:39:49 +0100 (CET), Peter Wippich
<pewi@gw-instruments.de> wrote:
> 
> Hi Mike,
> 
> have you started hcid ?? Or do  "hciconfig hci0 up".
> 
> Ciao,
> 
> Peter
> 
> 
> On Sun, 20 Feb 2005, Mike Lee wrote:
> 
> > Dear All
> >     I am now testing new hardware in ARM9 platform with CSR bluetooth
> > module. After i hciattach with 921600 baud rate, I can see the Build
> > ID of CSR. But when i use hciconfig, i can not see any device.
> >      Could anybody suggest me a way to find out the hardware error. Is
> > there any debug version of bluez util?
> >
> > Thank a lot
> > best regard
> > --
> > -------------------------------------------------------
> > Mike Lee
> >
> >
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users.
> > Discover which products truly live up to the hype. Start reading now.
> > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > _______________________________________________
> > Bluez-devel mailing list
> > Bluez-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-devel
> >
> 
> |       Peter Wippich                   Voice: +49 30 46776411          |
> |       G&W Instruments GmbH            fax:   +49 30 46776419          |
> |       Gustav-Meyer-Allee 25, Geb. 12  Email: pewi@gw-instruments.de   |
> |       D-13355 Berlin  / Germany                                       |
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
> 


-- 
-------------------------------------------------------
Mike Lee


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] About new hardware testing

[Peter Wippich]

Hi Mike,

I remember we initialy had a problem to get the right default pass for
hcid.conf when cross compiling.

Try to start hcid with -f [config-file] to make sure it starts with the
right configuration file. Does "hciconfig hci0 up" work ??

I use

hciattach /dev/ttyS1 -s 115200 csr 921600 flow

to attach the bluetooth device (CSR with HCI connected to an ARM).

Hope this help,

Peter

On Sun, 20 Feb 2005, Mike Lee wrote:

> Dear Peter
>
>    Yes, i have done that.
>
> best regard
> Mike,Lee
>
>
> On Sun, 20 Feb 2005 16:39:49 +0100 (CET), Peter Wippich
> <pewi@gw-instruments.de> wrote:
> >
> > Hi Mike,
> >
> > have you started hcid ?? Or do  "hciconfig hci0 up".
> >
> > Ciao,
> >
> > Peter
> >
> >
> > On Sun, 20 Feb 2005, Mike Lee wrote:
> >
> > > Dear All
> > >     I am now testing new hardware in ARM9 platform with CSR bluetooth
> > > module. After i hciattach with 921600 baud rate, I can see the Build
> > > ID of CSR. But when i use hciconfig, i can not see any device.
> > >      Could anybody suggest me a way to find out the hardware error. Is
> > > there any debug version of bluez util?
> > >
> > > Thank a lot
> > > best regard
> > > --
> > > -------------------------------------------------------
> > > Mike Lee
> > >
> > >
> > > -------------------------------------------------------
> > > SF email is sponsored by - The IT Product Guide
> > > Read honest & candid reviews on hundreds of IT Products from real users.
> > > Discover which products truly live up to the hype. Start reading now.
> > > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > > _______________________________________________
> > > Bluez-devel mailing list
> > > Bluez-devel@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/bluez-devel
> > >
> >
> > |       Peter Wippich                   Voice: +49 30 46776411          |
> > |       G&W Instruments GmbH            fax:   +49 30 46776419          |
> > |       Gustav-Meyer-Allee 25, Geb. 12  Email: pewi@gw-instruments.de   |
> > |       D-13355 Berlin  / Germany                                       |
> >
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users.
> > Discover which products truly live up to the hype. Start reading now.
> > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > _______________________________________________
> > Bluez-devel mailing list
> > Bluez-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-devel
> >
>
>
> --
> -------------------------------------------------------
> Mike Lee
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>

|	Peter Wippich 			Voice: +49 30 46776411		|
|	G&W Instruments GmbH		fax:   +49 30 46776419		|
|	Gustav-Meyer-Allee 25, Geb. 12	Email: pewi@gw-instruments.de	|
|	D-13355 Berlin  / Germany					|




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] About new hardware testing

[Mike Lee]

Dear Peter

> I remember we initialy had a problem to get the right default pass for
> hcid.conf when cross compiling.
    I will try this
> Does "hciconfig hci0 up" work ??
    Because i do not get any info from hciconfig. I can not "up" the device.
> 
> I use
> hciattach /dev/ttyS1 -s 115200 csr 921600 flow
> to attach the bluetooth device (CSR with HCI connected to an ARM).

   My script is like that hciattach /dev/ttyS1 -s 921600 csr 921600
flow. But it works on my development board, so i don't think it is the
problem.
> 
   Thanks for helping

best regard
Mike,Lee


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] About new hardware testing

[Marcel Holtmann]

Hi Mike,

> > I remember we initialy had a problem to get the right default pass for
> > hcid.conf when cross compiling.
>     I will try this
> > Does "hciconfig hci0 up" work ??
>     Because i do not get any info from hciconfig. I can not "up" the device.
> > 
> > I use
> > hciattach /dev/ttyS1 -s 115200 csr 921600 flow
> > to attach the bluetooth device (CSR with HCI connected to an ARM).
> 
>    My script is like that hciattach /dev/ttyS1 -s 921600 csr 921600
> flow. But it works on my development board, so i don't think it is the
> problem.

I think you should add a lot of printf to the hciattach to see where it
fails. If the hci0 device is not created (hciconfig shows nothing) then
the line discipline of ttyS1 is never changed to HCI.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel