From: "J. Nick Koston" <lists@bdraco.org>
To: linux-kernel@vger.kernel.org
Subject: Nightly usb oops
Date: Mon, 4 Dec 2000 10:13:09 -0500 [thread overview]
Message-ID: <20001204101309.A1368@bdraco.org> (raw)
My machine crashes almost every night with this oops. I've finally
managed to catch it before it was totally gone.
ksymoops 2.3.4 on i686 2.4.0-test10. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.0-test10 (specified)
-m /boot/System.map-2.4.0-test10 (specified)
Warning (compare_maps): snd symbol pm_register not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry
Warning (compare_maps): snd symbol pm_send not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry
Warning (compare_maps): snd symbol pm_unregister not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry
0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
0fef3180 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
0fef3180 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
0fef3340 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
0fef3340 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
0fef3280 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
0fef3180 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
0fef3300 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
0fef3280 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
0fef3180 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
0fef3300 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
Unable to handle kernel NULL pointer dereference at virtual address 00000014
c01faed6
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01faed6>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000008 ebx: cbd41385 ecx: cbd41380 edx: 00000008
esi: 00000000 edi: cfe12400 ebp: 00000001 esp: c14fdf0c
ds: 0018 es: 0018 ss: 0018
Process khubd (pid: 7, stackpage=c14fd000)
Stack: cbd41385 00000000 cfe12400 00000001 00000008 00000000 00000009 00000000
00000001 00000000 00000000 c01fb1f3 cfe12400 00000000 cfe12400 c5985802
cfe12400 00000000 cbd41380 cbd41380 c01fb7f1 cfe12400 00000001 00000000
Call Trace: [<c01fb1f3>] [<c01fb7f1>] [<c01fcc60>] [<c01fce32>] [<c0293580>] [<c0293647>] [<c01fcfa5>]
[<c0105000>] [<c0108c03>]
Code: 8b 42 0c c7 44 24 24 00 00 00 00 0f b6 72 04 39 74 24 24 0f
>>EIP; c01faed6 <usb_set_maxpacket+46/120> <=====
Trace; c01fb1f3 <usb_set_configuration+e3/f0>
Trace; c01fb7f1 <usb_new_device+171/1d0>
Trace; c01fcc60 <usb_hub_port_connect_change+270/300>
Trace; c01fce32 <usb_hub_events+142/270>
Trace; c0293580 <usb_bandwidth_option+1bf8/28ec>
Trace; c0293647 <usb_bandwidth_option+1cbf/28ec>
Trace; c01fcfa5 <usb_hub_thread+45/70>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0108c03 <kernel_thread+23/30>
Code; c01faed6 <usb_set_maxpacket+46/120>
00000000 <_EIP>:
Code; c01faed6 <usb_set_maxpacket+46/120> <=====
0: 8b 42 0c mov 0xc(%edx),%eax <=====
Code; c01faed9 <usb_set_maxpacket+49/120>
3: c7 44 24 24 00 00 00 movl $0x0,0x24(%esp,1)
Code; c01faee0 <usb_set_maxpacket+50/120>
a: 00
Code; c01faee1 <usb_set_maxpacket+51/120>
b: 0f b6 72 04 movzbl 0x4(%edx),%esi
Code; c01faee5 <usb_set_maxpacket+55/120>
f: 39 74 24 24 cmp %esi,0x24(%esp,1)
Code; c01faee9 <usb_set_maxpacket+59/120>
13: 0f 00 00 sldt (%eax)
Unable to handle kernel NULL pointer dereference at virtual address 00000008
c013ed99
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c013ed99>]
EFLAGS: 00010246
eax: 00000008 ebx: 00000000 ecx: 0000000c edx: 00000002
esi: 00000000 edi: 00000000 ebp: 00000008 esp: c36f3f08
ds: 0018 es: 0018 ss: 0018
Process initlog (pid: 532, stackpage=c36f3000)
Stack: c36f2000 00000000 00000002 00000000 0000000c 0000000e c013eec3 00000002
00000008 c36f3f48 c36f3f4c c36f2000 00000002 00000002 00000000 c36f2000
00000000 00000000 c013f133 00000002 00000000 00000002 cbd41140 c36f3fb8
Call Trace: [<c013eec3>] [<c013f133>] [<c01203ed>] [<c010a637>]
Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
>>EIP; c013ed99 <do_pollfd+29/b0> <=====
Trace; c013eec3 <do_poll+a3/e0>
Trace; c013f133 <sys_poll+233/350>
Trace; c01203ed <sys_nanosleep+10d/190>
Trace; c010a637 <system_call+33/38>
Code; c013ed99 <do_pollfd+29/b0>
00000000 <_EIP>:
Code; c013ed99 <do_pollfd+29/b0> <=====
0: 8b 45 00 mov 0x0(%ebp),%eax <=====
Code; c013ed9c <do_pollfd+2c/b0>
3: 85 c0 test %eax,%eax
Code; c013ed9e <do_pollfd+2e/b0>
5: 7c 59 jl 60 <_EIP+0x60> c013edf9 <do_pollfd+89/b0>
Code; c013eda0 <do_pollfd+30/b0>
7: e8 6b 1f ff ff call ffff1f77 <_EIP+0xffff1f77> c0130d10 <fget+0/30>
Code; c013eda5 <do_pollfd+35/b0>
c: 89 c6 mov %eax,%esi
Code; c013eda7 <do_pollfd+37/b0>
e: bb 20 00 00 00 mov $0x20,%ebx
Code; c013edac <do_pollfd+3c/b0>
13: 85 00 test %eax,(%eax)
Unable to handle kernel NULL pointer dereference at virtual address 00000040
c013ed99
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c013ed99>]
EFLAGS: 00210246
eax: 00000040 ebx: 00000000 ecx: 00000044 edx: 00000006
esi: 00000000 edi: 00000000 ebp: 00000040 esp: c09a7f08
ds: 0018 es: 0018 ss: 0018
Process deskguide_apple (pid: 835, stackpage=c09a7000)
Stack: c09a6000 00000000 00000006 00000000 00000044 00000046 c013eec3 00000006
00000040 c09a7f48 c09a7f4c c09a6000 00000006 00000006 00000000 c09a6000
00000000 00000000 c013f133 00000006 00000000 00000006 cbd41880 c09a7fb8
Call Trace: [<c013eec3>] [<c013f133>] [<c010a637>]
Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
>>EIP; c013ed99 <do_pollfd+29/b0> <=====
Trace; c013eec3 <do_poll+a3/e0>
Trace; c013f133 <sys_poll+233/350>
Trace; c010a637 <system_call+33/38>
Code; c013ed99 <do_pollfd+29/b0>
00000000 <_EIP>:
Code; c013ed99 <do_pollfd+29/b0> <=====
0: 8b 45 00 mov 0x0(%ebp),%eax <=====
Code; c013ed9c <do_pollfd+2c/b0>
3: 85 c0 test %eax,%eax
Code; c013ed9e <do_pollfd+2e/b0>
5: 7c 59 jl 60 <_EIP+0x60> c013edf9 <do_pollfd+89/b0>
Code; c013eda0 <do_pollfd+30/b0>
7: e8 6b 1f ff ff call ffff1f77 <_EIP+0xffff1f77> c0130d10 <fget+0/30>
Code; c013eda5 <do_pollfd+35/b0>
c: 89 c6 mov %eax,%esi
Code; c013eda7 <do_pollfd+37/b0>
e: bb 20 00 00 00 mov $0x20,%ebx
Code; c013edac <do_pollfd+3c/b0>
13: 85 00 test %eax,(%eax)
3 warnings issued. Results may not be reliable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2000-12-04 15:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-04 15:13 J. Nick Koston [this message]
2000-12-04 18:41 ` Nightly usb oops Greg KH
-- strict thread matches above, loose matches on Subject: below --
2000-12-04 19:15 Dunlap, Randy
2000-12-05 9:12 ` J. Nick Koston
2000-12-05 17:02 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001204101309.A1368@bdraco.org \
--to=lists@bdraco.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.