From: "J. Nick Koston" <lists@bdraco.org>
To: "Dunlap, Randy" <randy.dunlap@intel.com>, linux-kernel@vger.kernel.org
Subject: Re: Nightly usb oops
Date: Tue, 5 Dec 2000 04:12:18 -0500 [thread overview]
Message-ID: <20001205041218.A11997@bdraco.org> (raw)
In-Reply-To: <D5E932F578EBD111AC3F00A0C96B1E6F07DBDDD2@orsmsx31.jf.intel.com>
In-Reply-To: <D5E932F578EBD111AC3F00A0C96B1E6F07DBDDD2@orsmsx31.jf.intel.com>; from randy.dunlap@intel.com on Mon, Dec 04, 2000 at 11:15:49AM -0800
I'll try pre4 tonight and see (could take up to 48 hours).
This is what I'm getting with test11 in my syslog (at least what I was
able to catch)
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 6
hub.c: USB new device connect on bus1/2/3, assigned device number 11
printer.c: usblp1: USB Bidirectional printer dev 11 if 0 alt 1
usb.c: USB disconnect on device 11
hub.c: USB new device connect on bus1/2/3, assigned device number 12
printer.c: usblp1: USB Bidirectional printer dev 12 if 0 alt 1
usb.c: USB disconnect on device 12
hub.c: USB new device connect on bus1/2/3, assigned device number 13
printer.c: usblp1: USB Bidirectional printer dev 13 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 13
hub.c: USB new device connect on bus1/2/3, assigned device number 14
printer.c: usblp1: USB Bidirectional printer dev 14 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 14
hub.c: USB new device connect on bus1/2/3, assigned device number 15
printer.c: usblp1: USB Bidirectional printer dev 15 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 15
hub.c: USB new device connect on bus1/2/3, assigned device number 16
printer.c: usblp1: USB Bidirectional printer dev 16 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 16
hub.c: USB new device connect on bus1/2/3, assigned device number 17
printer.c: usblp1: USB Bidirectional printer dev 17 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 17
hub.c: USB new device connect on bus1/2/3, assigned device number 18
printer.c: usblp1: USB Bidirectional printer dev 18 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 18
hub.c: USB new device connect on bus1/2/3, assigned device number 19
printer.c: usblp1: USB Bidirectional printer dev 19 if 0 alt 1
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 19
hub.c: USB new device connect on bus1/2/3, assigned device number 20
printer.c: usblp1: USB Bidirectional printer dev 20 if 0 alt 1
Thats a deskjet 932C on the other end. I don't even use it in linux
:-(
As for pulling anything out of the hub, I'm not touching anything and
its securely plugged into the wall on a UPS.
Nick
--cpu info---
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 1
cpu MHz : 853.000658
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
features : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1690.83
-------------
--proc usb devices--
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 2 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=222/900 us (25%), #Int= 3, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 7
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0451 ProdID=1446 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=1645 ProdID=0006 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 4 Ivl= 1ms
T: Bus=01 Lev=02 Prnt=03 Port=01 Cnt=02 Dev#= 5 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0428 ProdID=4001 Rev= 2.00
S: Manufacturer=Gravis
S: Product=GamePad Pro USB
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl= 10ms
T: Bus=01 Lev=02 Prnt=03 Port=02 Cnt=03 Dev#= 20 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1204 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=DeskJet 930C
S: SerialNumber=MY04S1124VJL
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
T: Bus=01 Lev=02 Prnt=03 Port=03 Cnt=04 Dev#= 7 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05c7 ProdID=2011 Rev= 1.12
S: Manufacturer=QTRONIX
S: Product=USB Keyboard and Mouse
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 20ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=82(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms
T: Bus=01 Lev=02 Prnt=03 Port=04 Cnt=05 Dev#= 8 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0428 ProdID=4001 Rev= 2.00
S: Manufacturer=Gravis
S: Product=GamePad Pro USB
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl= 10ms
T: Bus=01 Lev=02 Prnt=03 Port=05 Cnt=06 Dev#= 9 Spd=12 MxCh= 0
D: Ver= 1.01 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=0545 ProdID=8080 Rev= 3.0a
S: Product=USB IMAGING DEVICE
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=1022 Ivl= 1ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 0 Ivl= 1ms
I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS=1022 Ivl= 1ms
T: Bus=01 Lev=02 Prnt=03 Port=06 Cnt=07 Dev#= 10 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=045e ProdID=001e Rev= 1.03
S: Manufacturer=Microsoft
S: Product=Microsoft IntelliMouse® Explorer
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
-------------------------
On Mon, Dec 04, 2000 at 11:15:49AM -0800, Dunlap, Randy wrote:
> Envelope-to: lists@bdraco.org
> Delivery-date: Mon, 04 Dec 2000 14:17:09 -0500
> From: "Dunlap, Randy" <randy.dunlap@intel.com>
> To: "'J. Nick Koston'" <lists@bdraco.org>, linux-kernel@vger.kernel.org
> Subject: RE: Nightly usb oops
> Date: Mon, 4 Dec 2000 11:15:49 -0800
> X-Mailer: Internet Mail Service (5.5.2650.21)
> Precedence: bulk
> X-Mailing-List: linux-kernel@vger.kernel.org
>
> Hi,
>
> What kernel (test10)?
> > -m /boot/System.map-2.4.0-test10 (specified)
>
> What compiler/version?
>
> Please post a list of your USB devices from
> /proc/bus/usb/devices .
>
> Are you inserting or unplugging a USB device when this happens?
> If not, are you doing anything with USB when this happens?
>
> Thanks,
> ~Randy_________________________________________
> |randy.dunlap_at_intel.com 503-677-5408|
> |NOTE: Any views presented here are mine alone|
> |& may not represent the views of my employer.|
> -----------------------------------------------
>
> > -----Original Message-----
> > From: J. Nick Koston [mailto:lists@bdraco.org]
> > Sent: Monday, December 04, 2000 7:13 AM
> > To: linux-kernel@vger.kernel.org
> > Subject: Nightly usb oops
> >
> >
> > My machine crashes almost every night with this oops. I've finally
> > managed to catch it before it was totally gone.
> >
> >
> > ksymoops 2.3.4 on i686 2.4.0-test10. Options used
> > -V (default)
> > -k /proc/ksyms (default)
> > -l /proc/modules (default)
> > -o /lib/modules/2.4.0-test10 (specified)
> > -m /boot/System.map-2.4.0-test10 (specified)
> >
> > Warning (compare_maps): snd symbol pm_register not found in
> > /lib/modules/2.4.0-test10/misc/snd.o. Ignoring
> > /lib/modules/2.4.0-test10/misc/snd.o entry
> > Warning (compare_maps): snd symbol pm_send not found in
> > /lib/modules/2.4.0-test10/misc/snd.o. Ignoring
> > /lib/modules/2.4.0-test10/misc/snd.o entry
> > Warning (compare_maps): snd symbol pm_unregister not found in
> > /lib/modules/2.4.0-test10/misc/snd.o. Ignoring
> > /lib/modules/2.4.0-test10/misc/snd.o entry
> > 0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0
> > EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
> ... (many STALL/CRC/Timeouts for Dev=1b, 22, 25) ...
> > Unable to handle kernel NULL pointer dereference at virtual
> > address 00000014
> > c01faed6
> > *pde = 00000000
> > Oops: 0000
> > CPU: 0
> > EIP: 0010:[<c01faed6>]
> > Using defaults from ksymoops -t elf32-i386 -a i386
> > EFLAGS: 00010282
> > eax: 00000008 ebx: cbd41385 ecx: cbd41380 edx: 00000008
> > esi: 00000000 edi: cfe12400 ebp: 00000001 esp: c14fdf0c
> > ds: 0018 es: 0018 ss: 0018
> > Process khubd (pid: 7, stackpage=c14fd000)
> > Stack: cbd41385 00000000 cfe12400 00000001 00000008 00000000
> > 00000009 00000000
> > 00000001 00000000 00000000 c01fb1f3 cfe12400 00000000
> > cfe12400 c5985802
> > cfe12400 00000000 cbd41380 cbd41380 c01fb7f1 cfe12400
> > 00000001 00000000
> > Call Trace: [<c01fb1f3>] [<c01fb7f1>] [<c01fcc60>]
> > [<c01fce32>] [<c0293580>] [<c0293647>] [<c01fcfa5>]
> > [<c0105000>] [<c0108c03>]
> > Code: 8b 42 0c c7 44 24 24 00 00 00 00 0f b6 72 04 39 74 24 24 0f
> >
> > >>EIP; c01faed6 <usb_set_maxpacket+46/120> <=====
> > Trace; c01fb1f3 <usb_set_configuration+e3/f0>
> > Trace; c01fb7f1 <usb_new_device+171/1d0>
> > Trace; c01fcc60 <usb_hub_port_connect_change+270/300>
> > Trace; c01fce32 <usb_hub_events+142/270>
> > Trace; c0293580 <usb_bandwidth_option+1bf8/28ec>
> > Trace; c0293647 <usb_bandwidth_option+1cbf/28ec>
> > Trace; c01fcfa5 <usb_hub_thread+45/70>
> > Trace; c0105000 <empty_bad_page+0/1000>
> > Trace; c0108c03 <kernel_thread+23/30>
> > Code; c01faed6 <usb_set_maxpacket+46/120>
> > 00000000 <_EIP>:
> > Code; c01faed6 <usb_set_maxpacket+46/120> <=====
> > 0: 8b 42 0c mov 0xc(%edx),%eax <=====
> > Code; c01faed9 <usb_set_maxpacket+49/120>
> > 3: c7 44 24 24 00 00 00 movl $0x0,0x24(%esp,1)
> > Code; c01faee0 <usb_set_maxpacket+50/120>
> > a: 00
> > Code; c01faee1 <usb_set_maxpacket+51/120>
> > b: 0f b6 72 04 movzbl 0x4(%edx),%esi
> > Code; c01faee5 <usb_set_maxpacket+55/120>
> > f: 39 74 24 24 cmp %esi,0x24(%esp,1)
> > Code; c01faee9 <usb_set_maxpacket+59/120>
> > 13: 0f 00 00 sldt (%eax)
> >
> > Unable to handle kernel NULL pointer dereference at virtual
> > address 00000008
> > c013ed99
> > *pde = 00000000
> > Oops: 0000
> > CPU: 0
> > EIP: 0010:[<c013ed99>]
> > EFLAGS: 00010246
> > eax: 00000008 ebx: 00000000 ecx: 0000000c edx: 00000002
> > esi: 00000000 edi: 00000000 ebp: 00000008 esp: c36f3f08
> > ds: 0018 es: 0018 ss: 0018
> > Process initlog (pid: 532, stackpage=c36f3000)
> > Stack: c36f2000 00000000 00000002 00000000 0000000c 0000000e
> > c013eec3 00000002
> > 00000008 c36f3f48 c36f3f4c c36f2000 00000002 00000002
> > 00000000 c36f2000
> > 00000000 00000000 c013f133 00000002 00000000 00000002
> > cbd41140 c36f3fb8
> > Call Trace: [<c013eec3>] [<c013f133>] [<c01203ed>] [<c010a637>]
> > Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
> >
> > >>EIP; c013ed99 <do_pollfd+29/b0> <=====
> > Trace; c013eec3 <do_poll+a3/e0>
> > Trace; c013f133 <sys_poll+233/350>
> > Trace; c01203ed <sys_nanosleep+10d/190>
> > Trace; c010a637 <system_call+33/38>
> > Code; c013ed99 <do_pollfd+29/b0>
> > 00000000 <_EIP>:
> > Code; c013ed99 <do_pollfd+29/b0> <=====
> > 0: 8b 45 00 mov 0x0(%ebp),%eax <=====
> > Code; c013ed9c <do_pollfd+2c/b0>
> > 3: 85 c0 test %eax,%eax
> > Code; c013ed9e <do_pollfd+2e/b0>
> > 5: 7c 59 jl 60 <_EIP+0x60>
> > c013edf9 <do_pollfd+89/b0>
> > Code; c013eda0 <do_pollfd+30/b0>
> > 7: e8 6b 1f ff ff call ffff1f77
> > <_EIP+0xffff1f77> c0130d10 <fget+0/30>
> > Code; c013eda5 <do_pollfd+35/b0>
> > c: 89 c6 mov %eax,%esi
> > Code; c013eda7 <do_pollfd+37/b0>
> > e: bb 20 00 00 00 mov $0x20,%ebx
> > Code; c013edac <do_pollfd+3c/b0>
> > 13: 85 00 test %eax,(%eax)
> >
> > Unable to handle kernel NULL pointer dereference at virtual
> > address 00000040
> > c013ed99
> > *pde = 00000000
> > Oops: 0000
> > CPU: 0
> > EIP: 0010:[<c013ed99>]
> > EFLAGS: 00210246
> > eax: 00000040 ebx: 00000000 ecx: 00000044 edx: 00000006
> > esi: 00000000 edi: 00000000 ebp: 00000040 esp: c09a7f08
> > ds: 0018 es: 0018 ss: 0018
> > Process deskguide_apple (pid: 835, stackpage=c09a7000)
> > Stack: c09a6000 00000000 00000006 00000000 00000044 00000046
> > c013eec3 00000006
> > 00000040 c09a7f48 c09a7f4c c09a6000 00000006 00000006
> > 00000000 c09a6000
> > 00000000 00000000 c013f133 00000006 00000000 00000006
> > cbd41880 c09a7fb8
> > Call Trace: [<c013eec3>] [<c013f133>] [<c010a637>]
> > Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
> >
> > >>EIP; c013ed99 <do_pollfd+29/b0> <=====
> > Trace; c013eec3 <do_poll+a3/e0>
> > Trace; c013f133 <sys_poll+233/350>
> > Trace; c010a637 <system_call+33/38>
> > Code; c013ed99 <do_pollfd+29/b0>
> > 00000000 <_EIP>:
> > Code; c013ed99 <do_pollfd+29/b0> <=====
> > 0: 8b 45 00 mov 0x0(%ebp),%eax <=====
> > Code; c013ed9c <do_pollfd+2c/b0>
> > 3: 85 c0 test %eax,%eax
> > Code; c013ed9e <do_pollfd+2e/b0>
> > 5: 7c 59 jl 60 <_EIP+0x60>
> > c013edf9 <do_pollfd+89/b0>
> > Code; c013eda0 <do_pollfd+30/b0>
> > 7: e8 6b 1f ff ff call ffff1f77
> > <_EIP+0xffff1f77> c0130d10 <fget+0/30>
> > Code; c013eda5 <do_pollfd+35/b0>
> > c: 89 c6 mov %eax,%esi
> > Code; c013eda7 <do_pollfd+37/b0>
> > e: bb 20 00 00 00 mov $0x20,%ebx
> > Code; c013edac <do_pollfd+3c/b0>
> > 13: 85 00 test %eax,(%eax)
> >
> >
> > 3 warnings issued. Results may not be reliable.
> > -
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-12-05 9:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-04 19:15 Nightly usb oops Dunlap, Randy
2000-12-05 9:12 ` J. Nick Koston [this message]
2000-12-05 17:02 ` Greg KH
-- strict thread matches above, loose matches on Subject: below --
2000-12-04 15:13 J. Nick Koston
2000-12-04 18:41 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001205041218.A11997@bdraco.org \
--to=lists@bdraco.org \
--cc=linux-kernel@vger.kernel.org \
--cc=randy.dunlap@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.