From: R.E.Wolff@BitWizard.nl (Rogier Wolff)
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ivo Timmermans <irt@cistron.nl>, linux-kernel@vger.kernel.org
Subject: Re: binfmt_script and ^M
Date: Tue, 27 Feb 2001 15:36:40 +0100 (MET) [thread overview]
Message-ID: <200102271436.PAA13534@cave.bitwizard.nl> (raw)
In-Reply-To: <E14XkaQ-0003Sa-00@the-village.bc.nu> from Alan Cox at "Feb 27, 2001 01:54:40 pm"
Alan Cox wrote:
> > > > (\r\n), Linux 2.4.2 can't find an interpreter because it doesn't
> > > > recognize the \r. The following patch should fix this (untested).
> > >
> > > Fix the script. The kernel expects a specific format
> >
> > For what reason? Is it a standard to not allow it, or does it break
> > other things?
>
> The line terminator is \n so if you have
>
> #!/usr/bin/perl\r\n
>
> Then the command to run is "/usr/bin/perl\r" - and \r is a valid file name
> component
Agreed. If you insist "fix" it with.....
cd /usr/bin
ln -s perl perl\r
Roger.
--
** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* There are old pilots, and there are bold pilots.
* There are also old, bald pilots.
next prev parent reply other threads:[~2001-02-27 14:37 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-27 13:03 binfmt_script and ^M Ivo Timmermans
2001-02-27 13:44 ` Alan Cox
2001-02-27 13:47 ` Ivo Timmermans
2001-02-27 13:54 ` Alan Cox
2001-02-27 14:36 ` Rogier Wolff [this message]
2001-02-28 20:10 ` Erik Hensema
2001-03-01 12:04 ` Pavel Machek
2001-03-05 13:20 ` Jan Nieuwenhuizen
2001-03-05 13:37 ` Andreas Schwab
2001-03-05 13:40 ` Richard B. Johnson
2001-03-05 14:55 ` John Kodis
2001-03-05 15:25 ` Rik van Riel
2001-03-05 15:59 ` Jeff Mcadams
2001-03-05 16:18 ` Paul Flinders
2001-03-05 17:12 ` Andreas Schwab
2001-03-05 19:54 ` Paul Flinders
2001-03-05 20:09 ` Paul Flinders
2001-03-06 10:41 ` Andreas Schwab
2001-03-06 12:33 ` Paul Flinders
2001-03-06 14:45 ` Laramie Leavitt
2001-03-06 15:12 ` Sean Hunter
2001-03-06 15:37 ` David Weinehall
2001-03-06 21:10 ` Thorsten Glaser Geuer
[not found] ` <20010308130145.O20737@dev.sportingbet.com>
2001-03-09 16:52 ` Thorsten Glaser Geuer
2001-03-06 15:53 ` James A. Sutherland
2001-03-06 16:59 ` Xavier Bestel
2001-03-07 8:29 ` Ondrej Sury
2001-03-06 18:17 ` binfmt_script and ^M (historical note) Don Dugger
2001-03-05 18:58 ` binfmt_script and ^M Pozsar Balazs
2001-03-05 20:39 ` Robert Read
2001-03-05 21:05 ` Pozsar Balazs
2001-03-05 22:34 ` Robert Read
2001-03-06 15:14 ` Jeff Coy
2001-03-06 18:15 ` Peter Samuelson
2001-03-06 18:36 ` Jeff Coy
2001-03-06 20:26 ` John Kodis
2001-03-06 20:43 ` Andreas Schwab
2001-03-06 2:18 ` Richard B. Johnson
2001-03-05 15:50 ` Richard B. Johnson
2001-03-05 16:53 ` H. Peter Anvin
2001-03-05 21:48 ` Dr. Kelsey Hudson
2001-03-06 18:19 ` Peter Samuelson
2001-03-06 21:04 ` Dr. Kelsey Hudson
2001-03-05 14:56 ` [PATCH]: print missing interpreter name [Was: Re: binfmt_script and ^M] Jan Nieuwenhuizen
2001-03-05 15:59 ` Richard B. Johnson
2001-03-05 20:18 ` [PATCH #3]: " Jan Nieuwenhuizen
2001-03-05 16:37 ` binfmt_script and ^M Erik Hensema
2001-03-05 22:13 ` Pavel Machek
-- strict thread matches above, loose matches on Subject: below --
2001-02-27 13:42 Heusden, Folkert van
2001-02-27 13:38 ` Ivo Timmermans
2001-02-27 14:01 ` Bruce Harada
2001-02-27 19:20 ` Jamie Lokier
2001-02-27 19:59 ` Don Dugger
2001-02-27 21:35 ` Rogier Wolff
2001-02-27 13:53 Heusden, Folkert van
2001-02-27 14:26 ` Alistair Riddell
2001-02-27 23:22 ` David
2001-02-28 14:07 ` Jamie Lokier
2001-02-28 22:23 ` H. Peter Anvin
2001-03-05 19:14 Jesse Pollard
2001-03-06 20:54 ` Thorsten Glaser Geuer
2001-03-05 21:15 Andries.Brouwer
2001-03-06 13:55 Jesse Pollard
2001-03-06 14:54 ` Andreas Schwab
2001-03-06 15:56 Jesse Pollard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200102271436.PAA13534@cave.bitwizard.nl \
--to=r.e.wolff@bitwizard.nl \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=irt@cistron.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.