All of lore.kernel.org
 help / color / mirror / Atom feed
From: idsfa@visi.com
To: linux-lvm@sistina.com
Subject: Re: [linux-lvm] LVM and *bad* performance (counterexample)
Date: Sun, 27 May 2001 12:01:29 -0500	[thread overview]
Message-ID: <20010527120129.A4460@mitethe.eudyptes> (raw)
In-Reply-To: <200105270747.f4R7lIYa005098@webber.adilger.int>; from adilger@turbolinux.com on Sun, May 27, 2001 at 01:47:18AM -0600

On Sun, May 27, 2001 at 01:47:18AM -0600, Andreas Dilger wrote:

> I'm not sure if it is an SMP or SCSI issue, or what.  Urs, do you also
> have an SMP system?  Maybe there are locking slowdowns under SMP and
> not under UP?

I haven't got a UP kernel to test right now to confirm, but my SMP
purely IDE system (specs follow) shows rough parity at 512 byte
reads and 2x FASTER on the LV at 4096 byte blocks.  When I switch
to a striped LV I see parity at both sizes, with the LV being
slightly faster.  For giggles, I also checked out a RAID-1 (mirror)
set as well, which smoked everything, as it should.

Device                 Block     Real          User          Sys
/dev/md0                512     2.080s        0.110s        0.660s
/dev/hda1               512     5.079s        0.140s        2.040s
/dev/mitethe/nostripe   512     4.795s        0.300s        2.380s
/dev/mitethe/stripe     512     4.350s        0.090s        2.530s

/dev/md0                4096   16.482s        0.060s        6.090s
/dev/mitethe/nostripe   4096   26.278s        0.010s        7.270s
/dev/mitethe/stripe     4096   32.803s        0.170s       12.020s
/dev/hda1               4096   40.947s        0.180s       13.590s


Now comes the part where I admit we're comparing apples to oranges:

Linux 2.4.3
LVM   0.9.1_beta7
2x Pentium III 600MHz
Tyan Tiger 133 Mobo (running at 133 FSB)

Maxtor 53073U6		30GB ATA/66    hda
WDC WD300AB-00BVA0	30GB ATA/66    hdc

/dev/hda:
 multcount    = 16 (on)
 I/O support  =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 59554/16/63, sectors = 60030432, start = 0

/dev/hdc:
 multcount    = 16 (on)
 I/O support  =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 58168/16/63, sectors = 58633344, start = 0

-- 
$ fortune -m Kellen

  parent reply	other threads:[~2001-05-27 17:01 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-02-26 15:44 [linux-lvm] LVM and *bad* performance (no striping) Urs Thuermann
2001-02-26 20:39 ` Joe Thornber
2001-02-26 21:03   ` Jorg de Jong
2001-02-26 21:38     ` Rik van Riel
2001-02-27  8:35   ` Patrick Caulfield
2001-02-27 12:21   ` Urs Thuermann
2001-02-28 11:05     ` Heinz J. Mauelshagen
2001-04-10 19:30       ` Urs Thuermann
2001-04-10 21:37         ` Andreas Dilger
2001-04-11 11:23           ` Urs Thuermann
2001-04-11 19:49             ` Andreas Dilger
2001-04-11 22:00               ` Terje Kvernes
2001-05-15 11:46               ` Urs Thuermann
2001-05-15 12:13                 ` Patrick Caulfield
2001-05-26 11:17                   ` Urs Thuermann
2001-05-27  7:47                     ` Andreas Dilger
2001-05-27  9:47                       ` Urs Thuermann
2001-05-27 17:01                       ` idsfa [this message]
2001-05-15 17:08                 ` Andreas Dilger
2001-05-26 11:23                   ` Urs Thuermann
2001-02-26 21:41 ` Rik van Riel
2001-02-27 10:33   ` Urs Thuermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20010527120129.A4460@mitethe.eudyptes \
    --to=idsfa@visi.com \
    --cc=linux-lvm@sistina.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.