All of lore.kernel.org
 help / color / mirror / Atom feed
* Re: [parisc-linux] palinux 0.9.1
@ 2001-07-06 12:57 Joël Soete
  2001-07-09  7:46 ` Richard Hirst
  0 siblings, 1 reply; 12+ messages in thread
From: Joël Soete @ 2001-07-06 12:57 UTC (permalink / raw)
  To: Richard Hirst <rhirst; +Cc: parisc-linux, puffin

[-- Attachment #1: Type: text/plain, Size: 3050 bytes --]



Hello Richard,

The problem ip_local_deliver:... cames in fact from the dhcp_client which
is started by default?

For the B180, I set console path ro serial_1 and it works fine for serial
console.

For the sti console, I do have to be unlucky; I get backup the kernel
installed with 0.9 then ps2 kbd works back ( I also suspect the kbd and
change it, no difference)? what could be the problem? I also try to get the
last firmware but HP prevent to install it over the builtin ?

I join my last kern.log.  May be could you see some difference in the
hardware configuration that the kernel detect.

Kind regards,
     Joel

(See attached file: kern.log.last)



                                                                                                              
                    Richard Hirst                                                                             
                    <rhirst@linux        To:     Joël Soete/BRU/MASTERCARD@MASTERCARD                         
                    care.com>            cc:     puffin@esiee.net@SMTP@EUROPAY,                               
                                         parisc-linux@lists.parisc-linux.org@SMTP@EUROPAY                     
                    06-07-01             Subject:     Re: [parisc-linux] palinux 0.9.1                        
                    01:08 PM                                                                                  
                                                                                                              
                                                                                                              



On Wed, Jul 04, 2001 at 06:44:02PM +0200, Joël Soete wrote:
> Hi all,
>
> Very nice on 712 model.
> Just a small problem after the configuration of the inet interface:
> ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN
> skb: pf=2 (unowned) dev=l0 len=328
> PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 F=0x0000 T=16
>
> This message is repeated severall times?

Don't know what causes that.

> But on the B180, I met the same problem as I met with the kernel
> vmlinux-20010629 (from puffin also with your vmlinux-712+sound+mouse):
> all seems to work fine but the keyboard does not answer (and no serial
> consol yet available) also it is impossible to contine the install?

I'm just installing a B180 using the 0.9.1 ISO, using the graphical
console.  I have a keyboard and mouse connected, and it is working
fine.  I'll try a serial console install next.

Richard



**********************************************************************
This e-mail and any attachments to it may contain confidential information which is strictly intended for the use of the authorised recipient.  If you have received this e-mail in error, please delete it and notify the sender by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************

[-- Attachment #2: kern.log.last --]
[-- Type: application/octet-stream, Size: 10301 bytes --]

Jul  6 14:41:23 palin kernel: klogd 1.4.1#2, log source = /proc/kmsg started.
Jul  6 14:41:23 palin kernel: Inspecting /boot/System.map
Jul  6 14:41:25 palin kernel: Loaded 24720 symbols from /boot/System.map.
Jul  6 14:41:25 palin kernel: Symbols match kernel version 2.4.0.
Jul  6 14:41:25 palin kernel: No module symbols loaded.
Jul  6 14:41:25 palin kernel: Linux version 2.4.0-32 (root@slab) (gcc version 3.0 (Debian)) #1 Thu Jun 28 11:49:00 BST 2001
Jul  6 14:41:25 palin kernel: FP[0] enabled: Rev 1 Model 15
Jul  6 14:41:25 palin kernel: The 32-bit Kernel has started...
Jul  6 14:41:25 palin kernel: Determining PDC firmware type: Newer Box
Jul  6 14:41:25 palin kernel: model^I00005040 00000481 00000000 02020202 77ea2456 100000f0 00000004 000000ba 000000ba
Jul  6 14:41:25 palin kernel: vers^I00000018
Jul  6 14:41:25 palin kernel: cpuid^I000001f8
Jul  6 14:41:25 palin kernel: CPUID^Ivers 15 rev 24
Jul  6 14:41:25 palin kernel: model^I9000/778/B180L
Jul  6 14:41:25 palin kernel: Total Memory: 128 Mb
Jul  6 14:41:25 palin kernel: On node 0 totalpages: 32768
Jul  6 14:41:25 palin kernel: zone(0): 32768 pages.
Jul  6 14:41:25 palin kernel: zone(1): 0 pages.
Jul  6 14:41:25 palin kernel: zone(2): 0 pages.
Jul  6 14:41:25 palin kernel: led_init: chassis info: model=1 (unknown), lcd_width=16, cmd_delay=40, sizecnt=32, actcnt=8, maxcnt=8
Jul  6 14:41:25 palin kernel: PDC reported no LCD or LED.
Jul  6 14:41:25 palin kernel: Searching for devices...
Jul  6 14:41:25 palin kernel: Found devices:
Jul  6 14:41:25 palin kernel: 1. Phantom PseudoBC GSC+ Port (7) at 0xffc00000, versions 0x504, 0x0, 0x0, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 2. Merlin+ 132 Dino RS-232 (10) at 0xfff83000, versions 0x22, 0x0, 0x8c, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 3. Merlin L2+ 180 (9000/778/B180L) (0) at 0xfffbe000, versions 0x504, 0x0, 0x4, 0x0, 0x81
Jul  6 14:41:25 palin kernel: 4. Merlin+ L2 180 (1) at 0xfffbf000, versions 0x5a, 0x0, 0x9, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 5. Merlin+ 180 Core BA (11) at 0xffd00000, versions 0x3f, 0x0, 0x81, 0x0, 0x0,  additional addresses: 0xffd0c000 0xffc00000 
Jul  6 14:41:25 palin kernel: 6. Merlin+ 180 Core RS-232 (10) at 0xffd05000, versions 0x3f, 0x0, 0x8c, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 7. Merlin+ 180 Core SCSI (10) at 0xffd06000, versions 0x3f, 0x0, 0x82, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 8. Merlin+ 180 Core Centronics (10) at 0xffd02000, versions 0x3f, 0x0, 0x74, 0x0, 0x0,  additional addresses: 0xffd01000 0xffd03000 
Jul  6 14:41:25 palin kernel: 9. Merlin+ 180 Core Audio (10) at 0xffd04000, versions 0x3f, 0x4, 0x7b, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 10. Merlin+ 180 Core PS/2 Port (10) at 0xffd08000, versions 0x3f, 0x0, 0x84, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 11. Merlin+ 180 Core PS/2 Port (10) at 0xffd08100, versions 0x3f, 0x0, 0x84, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 12. Gecko GSC Core Graphics (10) at 0xf8000000, versions 0x16, 0x0, 0x85, 0x0, 0x0,  additional addresses: 0xf0011000 
Jul  6 14:41:25 palin kernel: 13. Dino PCI Bridge (13) at 0xfff80000, versions 0x680, 0x3, 0xa, 0x0, 0x0,  additional addresses: 0xf0800000 
Jul  6 14:41:25 palin kernel: 14. Merlin+ 132 Dino PS/2 Port (10) at 0xfff81000, versions 0x22, 0x0, 0x96, 0x0, 0x0
Jul  6 14:41:25 palin kernel: That's a total of 14 devices.
Jul  6 14:41:25 palin kernel: CPU(s): 1 x PA7300LC (PCX-L2) at 180.000000 MHz
Jul  6 14:41:25 palin kernel: Kernel command line: root=/dev/sda3 HOME=/ console=tty0 TERM=linux
Jul  6 14:41:25 palin kernel: Console: colour dummy device 160x64
Jul  6 14:41:25 palin kernel: Calibrating delay loop... 119.60 BogoMIPS
Jul  6 14:41:25 palin kernel: Memory: 126364k available
Jul  6 14:41:25 palin kernel: Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Jul  6 14:41:25 palin kernel: Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Jul  6 14:41:25 palin kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul  6 14:41:25 palin kernel: Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Jul  6 14:41:25 palin kernel: POSIX conformance testing by UNIFIX
Jul  6 14:41:25 palin kernel: Dino version 3.1 (bridge mode) found at 0xfff80000
Jul  6 14:41:25 palin kernel: Lasi version 0 at 0xffd00000 found.
Jul  6 14:41:25 palin kernel: LED display at ffd0c000 registered
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 2318
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 4370
Jul  6 14:41:25 palin kernel: PS/2 keyboard controller at 0xffd08000 (irq 133) found, device attached.
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 3209
Jul  6 14:41:25 palin kernel: PS/2 psaux controller at 0xffd08100 (irq 133) found, device attached.
Jul  6 14:41:25 palin kernel: 
Jul  6 14:41:25 palin kernel: sticonsole_init: searching for STI ROMs
Jul  6 14:41:25 palin kernel: STI word mode ROM at f0011000, hpa=f8000000
Jul  6 14:41:25 palin kernel: STI word mode ROM, id 2d08c0a7-9a02587, conforms to spec rev. 8.07
Jul  6 14:41:25 palin kernel: STI device: INTERNAL_EG_1280
Jul  6 14:41:25 palin kernel: Console: switching to colour STI console 160x64
Jul  6 14:41:25 palin kernel: Linux NET4.0 for Linux 2.4
Jul  6 14:41:25 palin kernel: Based upon Swansea University Computer Society NET3.039
Jul  6 14:41:25 palin kernel: Starting kswapd v1.8
Jul  6 14:41:25 palin kernel: stifb: Unsupported graphics card (id=0x2d08c0a7) - skipping.
Jul  6 14:41:25 palin kernel: pty: 256 Unix98 ptys configured
Jul  6 14:41:25 palin kernel: request_module[parport_lowlevel]: Root fs not mounted
Jul  6 14:41:25 palin kernel: lp: driver loaded but no devices found
Jul  6 14:41:25 palin kernel: RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
Jul  6 14:41:25 palin kernel: loop: enabling 8 loop devices
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 2270
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 4364
Jul  6 14:41:25 palin kernel: Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Jul  6 14:41:25 palin kernel: ttyS00 at iomem 0xffd05800 (irq = 154) is a 16550A
Jul  6 14:41:25 palin kernel: ttyS01 at iomem 0xfff83800 (irq = 74) is a 16550A
Jul  6 14:41:25 palin kernel: Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
Jul  6 14:41:25 palin kernel: Linux Tulip driver version 0.9.13 (January 2, 2001)
Jul  6 14:41:25 palin kernel: eth0: Digital DS21143 Tulip rev 65 at 0xff00, 00:10:83:65:09:4B, IRQ 64.
Jul  6 14:41:25 palin kernel: eth0:  MII transceiver #1 config 1000 status 782d advertising 01e1.
Jul  6 14:41:25 palin kernel: parport_init_chip: initialize bidirectional-mode.
Jul  6 14:41:25 palin kernel: parport0: PC-style at 0xffd02800, irq 152 [PCSPP,TRISTATE]
Jul  6 14:41:25 palin kernel: lp0: using parport0 (interrupt-driven).
Jul  6 14:41:25 palin kernel: SCSI subsystem driver Revision: 1.00
Jul  6 14:41:25 palin kernel: sym53c8xx: at PCI bus 0, device 19, function 0
Jul  6 14:41:25 palin kernel: sym53c8xx: 53c875 detected 
Jul  6 14:41:25 palin kernel: sym53c875-0: rev 0x4 on pci bus 0 device 19 function 0 irq 67
Jul  6 14:41:25 palin kernel: sym53c875-0: NCR clock is 40401KHz
Jul  6 14:41:25 palin kernel: sym53c875-0: ID 7, Fast-20, Parity Checking
Jul  6 14:41:25 palin kernel: sym53c875-0: on-chip RAM at 0xf0ffe000
Jul  6 14:41:25 palin kernel: sym53c875-0: restart (scsi reset).
Jul  6 14:41:25 palin kernel: sym53c875-0: Downloading SCSI SCRIPTS.
Jul  6 14:41:25 palin kernel: scsi0 : sym53c8xx - version 1.6b
Jul  6 14:41:25 palin kernel:   Vendor: SEAGATE   Model: ST39140WS         Rev: HP03
Jul  6 14:41:25 palin kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: tagged command queue depth set to 8
Jul  6 14:41:25 palin kernel: sim700: Configuring 53c710 (SCSI-ID 7) at ffd06100, IRQ 150, options 0
Jul  6 14:41:25 palin kernel: scsi1: Revision 0x2
Jul  6 14:41:25 palin kernel: scsi1: test 1 completed ok.
Jul  6 14:41:25 palin kernel: scsi1 : LASI/Simple 53c7xx
Jul  6 14:41:25 palin kernel:   Vendor: HP        Model: DVD-ROM 6x/32x    Rev: 1.08
Jul  6 14:41:25 palin kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Jul  6 14:41:25 palin kernel: Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide msgout: 1-2-3-1.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide msgin: 1-2-3-1.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide: wide=1 chg=0.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide msgout: 1-2-3-1.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide msgin: 1-2-3-1.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide: wide=1 chg=0.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: sync msgout: 1-3-1-c-10.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: sync msg in: 1-3-1-c-f.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Jul  6 14:41:25 palin kernel: SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
Jul  6 14:41:25 palin kernel: Partition check:
Jul  6 14:41:25 palin kernel:  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Jul  6 14:41:25 palin kernel: Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
Jul  6 14:41:25 palin kernel: sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Jul  6 14:41:25 palin kernel: Uniform CD-ROM driver Revision: 3.12
Jul  6 14:41:25 palin kernel: Lasi Harmony Audio rev. 0 at 0xffd04000, using IRQ 146
Jul  6 14:41:25 palin kernel: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Jul  6 14:41:25 palin kernel: md.c: sizeof(mdp_super_t) = 4096
Jul  6 14:41:25 palin kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jul  6 14:41:25 palin kernel: IP Protocols: ICMP, UDP, TCP
Jul  6 14:41:25 palin kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jul  6 14:41:25 palin kernel: TCP: Hash tables configured (established 8192 bind 16384)
Jul  6 14:41:25 palin kernel: IP-Config: Incomplete network configuration information.
Jul  6 14:41:25 palin kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jul  6 14:41:25 palin kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jul  6 14:41:25 palin kernel: Adding Swap: 124924k swap-space (priority -1)

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [parisc-linux] palinux 0.9.1
@ 2001-07-10 10:28 Joël Soete
  0 siblings, 0 replies; 12+ messages in thread
From: Joël Soete @ 2001-07-10 10:28 UTC (permalink / raw)
  To: Thomas Marteau <marteaut; +Cc: parisc-linux, puffin, rhirst

Hi Thomas,

It would effectively be interesting LSM (Debian OpenBsd, HURD, ...)

Come back to last CD 0.9.1. The install works well on 712 and B180 (Nice)

Just to mention some details:
a common problen is the startup of dhcpclient (as I have not dhcp server, I
did not choose dhcp at install time and its statup disturb a little bit the
install) but nothing critical

a problem specific to the B180 (the idea comes from Richard Hirst): after
booting on the CD no answer from the keyboard?
workaround: at this moment (while the sysytem is runing) just un-plug,
re-plug the keyboard and it answer correctly (as Richard I suspect a
specific problem of initialisation of the keyboard?)

Thanks and congratulation for this nice job,
     Joel



                                                                           =
                                  =20
                    Thomas                                                 =
                                  =20
                    Marteau              To:     Jo=EBl Soete/BRU/MASTERCAR=
D@MASTERCARD                        =20
                    <marteaut@esi        cc:     rhirst@linuxcare.com@SMTP@=
EUROPAY,                          =20
                    ee.fr>               parisc-linux@lists.parisc-linux.or=
g@SMTP@EUROPAY,                   =20
                                         puffin@esiee.net@SMTP@EUROPAY     =
                                  =20
                    09-07-01             Subject:     Re: [parisc-linux] pa=
linux 0.9.1                       =20
                    07:24 PM                                               =
                                  =20
                                                                           =
                                  =20
                                                                           =
                                  =20



Hi all,

     I am back from LSM. So, I uploaded the 0.9.1 iso, I hope. I tried on
B132 and it went fine.
So, just download it and try.
If you experienced some troubles with the keyboard, just try to unplug
and plug it back... It should work.
Also, when it asks you some path, just hit return...

My apaologies again for the delay, Thomas
ESIEE Team





**********************************************************************
This e-mail and any attachments to it may contain confidential information =
which is strictly intended for the use of the authorised recipient.  If you=
 have received this e-mail in error, please delete it and notify the sender=
 by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [parisc-linux] palinux 0.9.1
@ 2001-07-09 17:43 Joël Soete
  2001-07-09 19:10 ` Thomas Marteau
  0 siblings, 1 reply; 12+ messages in thread
From: Joël Soete @ 2001-07-09 17:43 UTC (permalink / raw)
  To: Thomas Marteau <marteaut; +Cc: parisc-linux, puffin, rhirst

Hello Thomas,

Nice LSM?

I will just start download now and burn it tommorrow and let you inform.

Thanks for advise,
     Joel


                                                                           =
                                  =20
                    Thomas                                                 =
                                  =20
                    Marteau              To:     Jo=EBl Soete/BRU/MASTERCAR=
D@MASTERCARD                        =20
                    <marteaut@esi        cc:     rhirst@linuxcare.com@SMTP@=
EUROPAY,                          =20
                    ee.fr>               parisc-linux@lists.parisc-linux.or=
g@SMTP@EUROPAY,                   =20
                                         puffin@esiee.net@SMTP@EUROPAY     =
                                  =20
                    09-07-01             Subject:     Re: [parisc-linux] pa=
linux 0.9.1                       =20
                    07:24 PM                                               =
                                  =20
                                                                           =
                                  =20
                                                                           =
                                  =20



Hi all,

     I am back from LSM. So, I uploaded the 0.9.1 iso, I hope. I tried on
B132 and it went fine.
So, just download it and try.
If you experienced some troubles with the keyboard, just try to unplug
and plug it back... It should work.
Also, when it asks you some path, just hit return...

My apaologies again for the delay, Thomas
ESIEE Team





**********************************************************************
This e-mail and any attachments to it may contain confidential information =
which is strictly intended for the use of the authorised recipient.  If you=
 have received this e-mail in error, please delete it and notify the sender=
 by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [parisc-linux] palinux 0.9.1
@ 2001-07-09 15:42 Joël Soete
  2001-07-09 17:24 ` Thomas Marteau
  0 siblings, 1 reply; 12+ messages in thread
From: Joël Soete @ 2001-07-09 15:42 UTC (permalink / raw)
  To: rhirst; +Cc: parisc-linux, puffin

FYI

I just recompile last cvs kernel (20010709 ie 2.4.6-pa7)
It boot fine (whithout yet STICON, just as before kernel of palinux-0.9).
So I believe that STICON on B180 will work soon.

Kind regards,
     Joel



                                                                           =
                                  =20
                    Richard Hirst                                          =
                                  =20
                    <rhirst@linux        To:     Jo=EBl Soete/BRU/MASTERCAR=
D@MASTERCARD                        =20
                    care.com>            cc:     "Richard Hirst <rhirst"   =
                                  =20
                                         <rhirst%linuxcare.com%SMTP%EUROPAY=
@mastercard.com>@SMTP@EUROPAY,    =20
                    09-07-01             parisc-linux@lists.parisc-linux.or=
g@SMTP@EUROPAY,                   =20
                    09:46 AM             puffin@esiee.net@SMTP@EUROPAY     =
                                  =20
                                         Subject:     Re: [parisc-linux] pa=
linux 0.9.1                       =20
                                                                           =
                                  =20



On Fri, Jul 06, 2001 at 02:57:19PM +0200, Jo=EBl Soete wrote:
>
>
> Hello Richard,
>
> The problem ip_local_deliver:... cames in fact from the dhcp_client which
> is started by default?

I reproduced that problem; hadn't seen it before because I usually
use dhcp to configure my network.  Seems you only get the errors if
dhcp-client doesn't have any real interfaces to configure.

> For the sti console, I do have to be unlucky; I get backup the kernel
> installed with 0.9 then ps2 kbd works back ( I also suspect the kbd and
> change it, no difference)? what could be the problem? I also try to get
the
> last firmware but HP prevent to install it over the builtin ?

You are not the only person with this problem, so hopefully someone will
fix it soon.

Richard





**********************************************************************
This e-mail and any attachments to it may contain confidential information =
which is strictly intended for the use of the authorised recipient.  If you=
 have received this e-mail in error, please delete it and notify the sender=
 by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [parisc-linux] palinux 0.9.1
@ 2001-07-06 13:25 Joël Soete
  0 siblings, 0 replies; 12+ messages in thread
From: Joël Soete @ 2001-07-06 13:25 UTC (permalink / raw)
  To: Richard Hirst <rhirst; +Cc: parisc-linux, puffin

My kern.log.last should be more readable like this:

Jul  6 14:41:23 palin kernel: klogd 1.4.1#2, log source =3D /proc/kmsg
started.
Jul  6 14:41:23 palin kernel: Inspecting /boot/System.map
Jul  6 14:41:25 palin kernel: Loaded 24720 symbols from /boot/System.map.
Jul  6 14:41:25 palin kernel: Symbols match kernel version 2.4.0.
Jul  6 14:41:25 palin kernel: No module symbols loaded.
Jul  6 14:41:25 palin kernel: Linux version 2.4.0-32 (root@slab) (gcc
version 3.0 (Debian)) #1 Thu Jun 28 11:49:00 BST 2001
Jul  6 14:41:25 palin kernel: FP[0] enabled: Rev 1 Model 15
Jul  6 14:41:25 palin kernel: The 32-bit Kernel has started...
Jul  6 14:41:25 palin kernel: Determining PDC firmware type: Newer Box
Jul  6 14:41:25 palin kernel: model^I00005040 00000481 00000000 02020202
77ea2456 100000f0 00000004 000000ba 000000ba
Jul  6 14:41:25 palin kernel: vers^I00000018
Jul  6 14:41:25 palin kernel: cpuid^I000001f8
Jul  6 14:41:25 palin kernel: CPUID^Ivers 15 rev 24
Jul  6 14:41:25 palin kernel: model^I9000/778/B180L
Jul  6 14:41:25 palin kernel: Total Memory: 128 Mb
Jul  6 14:41:25 palin kernel: On node 0 totalpages: 32768
Jul  6 14:41:25 palin kernel: zone(0): 32768 pages.
Jul  6 14:41:25 palin kernel: zone(1): 0 pages.
Jul  6 14:41:25 palin kernel: zone(2): 0 pages.
Jul  6 14:41:25 palin kernel: led_init: chassis info: model=3D1 (unknown),
lcd_width=3D16, cmd_delay=3D40, sizecnt=3D32, actcnt=3D8, maxcnt=3D8
Jul  6 14:41:25 palin kernel: PDC reported no LCD or LED.
Jul  6 14:41:25 palin kernel: Searching for devices...
Jul  6 14:41:25 palin kernel: Found devices:
Jul  6 14:41:25 palin kernel: 1. Phantom PseudoBC GSC+ Port (7) at
0xffc00000, versions 0x504, 0x0, 0x0, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 2. Merlin+ 132 Dino RS-232 (10) at
0xfff83000, versions 0x22, 0x0, 0x8c, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 3. Merlin L2+ 180 (9000/778/B180L) (0) at
0xfffbe000, versions 0x504, 0x0, 0x4, 0x0, 0x81
Jul  6 14:41:25 palin kernel: 4. Merlin+ L2 180 (1) at 0xfffbf000, versions
0x5a, 0x0, 0x9, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 5. Merlin+ 180 Core BA (11) at 0xffd00000,
versions 0x3f, 0x0, 0x81, 0x0, 0x0,  additional addresses: 0xffd0c000
0xffc00000
Jul  6 14:41:25 palin kernel: 6. Merlin+ 180 Core RS-232 (10) at
0xffd05000, versions 0x3f, 0x0, 0x8c, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 7. Merlin+ 180 Core SCSI (10) at 0xffd06000,
versions 0x3f, 0x0, 0x82, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 8. Merlin+ 180 Core Centronics (10) at
0xffd02000, versions 0x3f, 0x0, 0x74, 0x0, 0x0,  additional addresses:
0xffd01000 0xffd03000
Jul  6 14:41:25 palin kernel: 9. Merlin+ 180 Core Audio (10) at 0xffd04000,
versions 0x3f, 0x4, 0x7b, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 10. Merlin+ 180 Core PS/2 Port (10) at
0xffd08000, versions 0x3f, 0x0, 0x84, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 11. Merlin+ 180 Core PS/2 Port (10) at
0xffd08100, versions 0x3f, 0x0, 0x84, 0x0, 0x0
Jul  6 14:41:25 palin kernel: 12. Gecko GSC Core Graphics (10) at
0xf8000000, versions 0x16, 0x0, 0x85, 0x0, 0x0,  additional addresses:
0xf0011000
Jul  6 14:41:25 palin kernel: 13. Dino PCI Bridge (13) at 0xfff80000,
versions 0x680, 0x3, 0xa, 0x0, 0x0,  additional addresses: 0xf0800000
Jul  6 14:41:25 palin kernel: 14. Merlin+ 132 Dino PS/2 Port (10) at
0xfff81000, versions 0x22, 0x0, 0x96, 0x0, 0x0
Jul  6 14:41:25 palin kernel: That's a total of 14 devices.
Jul  6 14:41:25 palin kernel: CPU(s): 1 x PA7300LC (PCX-L2) at 180.000000
MHz
Jul  6 14:41:25 palin kernel: Kernel command line: root=3D/dev/sda3 HOME=3D/
console=3Dtty0 TERM=3Dlinux
Jul  6 14:41:25 palin kernel: Console: colour dummy device 160x64
Jul  6 14:41:25 palin kernel: Calibrating delay loop... 119.60 BogoMIPS
Jul  6 14:41:25 palin kernel: Memory: 126364k available
Jul  6 14:41:25 palin kernel: Dentry-cache hash table entries: 16384
(order: 5, 131072 bytes)
Jul  6 14:41:25 palin kernel: Buffer-cache hash table entries: 4096 (order:
2, 16384 bytes)
Jul  6 14:41:25 palin kernel: Page-cache hash table entries: 32768 (order:
5, 131072 bytes)
Jul  6 14:41:25 palin kernel: Inode-cache hash table entries: 8192 (order:
4, 65536 bytes)
Jul  6 14:41:25 palin kernel: POSIX conformance testing by UNIFIX
Jul  6 14:41:25 palin kernel: Dino version 3.1 (bridge mode) found at
0xfff80000
Jul  6 14:41:25 palin kernel: Lasi version 0 at 0xffd00000 found.
Jul  6 14:41:25 palin kernel: LED display at ffd0c000 registered
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 2318
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 4370
Jul  6 14:41:25 palin kernel: PS/2 keyboard controller at 0xffd08000 (irq
133) found, device attached.
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 3209
Jul  6 14:41:25 palin kernel: PS/2 psaux controller at 0xffd08100 (irq 133)
found, device attached.
Jul  6 14:41:25 palin kernel:
Jul  6 14:41:25 palin kernel: sticonsole_init: searching for STI ROMs
Jul  6 14:41:25 palin kernel: STI word mode ROM at f0011000, hpa=3Df8000000
Jul  6 14:41:25 palin kernel: STI word mode ROM, id 2d08c0a7-9a02587,
conforms to spec rev. 8.07
Jul  6 14:41:25 palin kernel: STI device: INTERNAL_EG_1280
Jul  6 14:41:25 palin kernel: Console: switching to colour STI console
160x64
Jul  6 14:41:25 palin kernel: Linux NET4.0 for Linux 2.4
Jul  6 14:41:25 palin kernel: Based upon Swansea University Computer
Society NET3.039
Jul  6 14:41:25 palin kernel: Starting kswapd v1.8
Jul  6 14:41:25 palin kernel: stifb: Unsupported graphics card
(id=3D0x2d08c0a7) - skipping.
Jul  6 14:41:25 palin kernel: pty: 256 Unix98 ptys configured
Jul  6 14:41:25 palin kernel: request_module[parport_lowlevel]: Root fs not
mounted
Jul  6 14:41:25 palin kernel: lp: driver loaded but no devices found
Jul  6 14:41:25 palin kernel: RAMDISK driver initialized: 16 RAM disks of
6144K size 1024 blocksize
Jul  6 14:41:25 palin kernel: loop: enabling 8 loop devices
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 2270
Jul  6 14:41:25 palin kernel: Lasi PS/2 wait 4364
Jul  6 14:41:25 palin kernel: Serial driver version 5.02 (2000-08-09) with
MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Jul  6 14:41:25 palin kernel: ttyS00 at iomem 0xffd05800 (irq =3D 154) is a
16550A
Jul  6 14:41:25 palin kernel: ttyS01 at iomem 0xfff83800 (irq =3D 74) is a
16550A
Jul  6 14:41:25 palin kernel: Generic RTC Driver v1.02 05/27/1999 Sam
Creasey (sammy@oh.verio.com)
Jul  6 14:41:25 palin kernel: Linux Tulip driver version 0.9.13 (January 2,
2001)
Jul  6 14:41:25 palin kernel: eth0: Digital DS21143 Tulip rev 65 at 0xff00,
00:10:83:65:09:4B, IRQ 64.
Jul  6 14:41:25 palin kernel: eth0:  MII transceiver #1 config 1000 status
782d advertising 01e1.
Jul  6 14:41:25 palin kernel: parport_init_chip: initialize
bidirectional-mode.
Jul  6 14:41:25 palin kernel: parport0: PC-style at 0xffd02800, irq 152
[PCSPP,TRISTATE]
Jul  6 14:41:25 palin kernel: lp0: using parport0 (interrupt-driven).
Jul  6 14:41:25 palin kernel: SCSI subsystem driver Revision: 1.00
Jul  6 14:41:25 palin kernel: sym53c8xx: at PCI bus 0, device 19, function
0
Jul  6 14:41:25 palin kernel: sym53c8xx: 53c875 detected
Jul  6 14:41:25 palin kernel: sym53c875-0: rev 0x4 on pci bus 0 device 19
function 0 irq 67
Jul  6 14:41:25 palin kernel: sym53c875-0: NCR clock is 40401KHz
Jul  6 14:41:25 palin kernel: sym53c875-0: ID 7, Fast-20, Parity Checking
Jul  6 14:41:25 palin kernel: sym53c875-0: on-chip RAM at 0xf0ffe000
Jul  6 14:41:25 palin kernel: sym53c875-0: restart (scsi reset).
Jul  6 14:41:25 palin kernel: sym53c875-0: Downloading SCSI SCRIPTS.
Jul  6 14:41:25 palin kernel: scsi0 : sym53c8xx - version 1.6b
Jul  6 14:41:25 palin kernel:   Vendor: SEAGATE   Model: ST39140WS
Rev: HP03
Jul  6 14:41:25 palin kernel:   Type:   Direct-Access
ANSI SCSI revision: 02
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: tagged command queue depth
set to 8
Jul  6 14:41:25 palin kernel: sim700: Configuring 53c710 (SCSI-ID 7) at
ffd06100, IRQ 150, options 0
Jul  6 14:41:25 palin kernel: scsi1: Revision 0x2
Jul  6 14:41:25 palin kernel: scsi1: test 1 completed ok.
Jul  6 14:41:25 palin kernel: scsi1 : LASI/Simple 53c7xx
Jul  6 14:41:25 palin kernel:   Vendor: HP        Model: DVD-ROM 6x/32x
Rev: 1.08
Jul  6 14:41:25 palin kernel:   Type:   CD-ROM
ANSI SCSI revision: 02
Jul  6 14:41:25 palin kernel: Detected scsi disk sda at scsi0, channel 0,
id 6, lun 0
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide msgout: 1-2-3-1.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide msgin: 1-2-3-1.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide: wide=3D1 chg=3D0.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide msgout: 1-2-3-1.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide msgin: 1-2-3-1.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: wide: wide=3D1 chg=3D0.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: sync msgout: 1-3-1-c-10.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: sync msg in: 1-3-1-c-f.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,0>: sync: per=3D12 scntl3=3D0x=
90
scntl4=3D0x0 ofs=3D15 fak=3D0 chg=3D0.
Jul  6 14:41:25 palin kernel: sym53c875-0-<6,*>: FAST-20 WIDE SCSI 40.0
MB/s (50 ns, offset 15)
Jul  6 14:41:25 palin kernel: SCSI device sda: 17773524 512-byte hdwr
sectors (9100 MB)
Jul  6 14:41:25 palin kernel: Partition check:
Jul  6 14:41:25 palin kernel:  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Jul  6 14:41:25 palin kernel: Detected scsi CD-ROM sr0 at scsi1, channel 0,
id 0, lun 0
Jul  6 14:41:25 palin kernel: sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2
cdda tray
Jul  6 14:41:25 palin kernel: Uniform CD-ROM driver Revision: 3.12
Jul  6 14:41:25 palin kernel: Lasi Harmony Audio rev. 0 at 0xffd04000,
using IRQ 146
Jul  6 14:41:25 palin kernel: md driver 0.90.0 MAX_MD_DEVS=3D256,
MD_SB_DISKS=3D27
Jul  6 14:41:25 palin kernel: md.c: sizeof(mdp_super_t) =3D 4096
Jul  6 14:41:25 palin kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jul  6 14:41:25 palin kernel: IP Protocols: ICMP, UDP, TCP
Jul  6 14:41:25 palin kernel: IP: routing cache hash table of 512 buckets,
4Kbytes
Jul  6 14:41:25 palin kernel: TCP: Hash tables configured (established 8192
bind 16384)
Jul  6 14:41:25 palin kernel: IP-Config: Incomplete network configuration
information.
Jul  6 14:41:25 palin kernel: NET4: Unix domain sockets 1.0/SMP for Linux
NET4.0.
Jul  6 14:41:25 palin kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jul  6 14:41:25 palin kernel: Adding Swap: 124924k swap-space (priority -1)

Joel,

PS: Sorry in the office we have to change of mail program and I not yet
familiar with it.



                                                                           =
                                  =20
                    Richard Hirst                                          =
                                  =20
                    <rhirst@linux        To:     Jo=EBl Soete/BRU/MASTERCAR=
D@MASTERCARD                        =20
                    care.com>            cc:     puffin@esiee.net@SMTP@EURO=
PAY,                              =20
                                         parisc-linux@lists.parisc-linux.or=
g@SMTP@EUROPAY                    =20
                    06-07-01             Subject:     Re: [parisc-linux] pa=
linux 0.9.1                       =20
                    01:08 PM                                               =
                                  =20
                                                                           =
                                  =20
                                                                           =
                                  =20



On Wed, Jul 04, 2001 at 06:44:02PM +0200, Jo=EBl Soete wrote:
> Hi all,
>
> Very nice on 712 model.
> Just a small problem after the configuration of the inet interface:
> ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN
> skb: pf=3D2 (unowned) dev=3Dl0 len=3D328
> PROTO=3D17 0.0.0.0:68 255.255.255.255:67 L=3D328 S=3D0x10 I=3D0 F=3D0x000=
0 T=3D16
>
> This message is repeated severall times?

Don't know what causes that.

> But on the B180, I met the same problem as I met with the kernel
> vmlinux-20010629 (from puffin also with your vmlinux-712+sound+mouse):
> all seems to work fine but the keyboard does not answer (and no serial
> consol yet available) also it is impossible to contine the install?

I'm just installing a B180 using the 0.9.1 ISO, using the graphical
console.  I have a keyboard and mouse connected, and it is working
fine.  I'll try a serial console install next.

Richard





**********************************************************************
This e-mail and any attachments to it may contain confidential information =
which is strictly intended for the use of the authorised recipient.  If you=
 have received this e-mail in error, please delete it and notify the sender=
 by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [parisc-linux] palinux 0.9.1
@ 2001-07-04 16:44 Joël Soete
  2001-07-06 11:08 ` Richard Hirst
  2001-07-09 17:26 ` Richard Hirst
  0 siblings, 2 replies; 12+ messages in thread
From: Joël Soete @ 2001-07-04 16:44 UTC (permalink / raw)
  To: puffin; +Cc: parisc-linux

Hi all,

Very nice on 712 model.
Just a small problem after the configuration of the inet interface:
ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN
skb: pf=2 (unowned) dev=l0 len=328
PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 F=0x0000 T=16

This message is repeated severall times?

Elsewhere the install finished well! (congratulation it is really a big
step).

But on the B180, I met the same problem as I met with the kernel
vmlinux-20010629 (from puffin also with your vmlinux-712+sound+mouse):
all seems to work fine but the keyboard does not answer (and no serial
consol yet available) also it is impossible to contine the install?

(Sorry I just tested vmlinux-20010629 in the beginning of afternnon and not
have time to report it before your realease)

Thanks in advance for help,
     Joel



**********************************************************************
This e-mail and any attachments to it may contain confidential information which is strictly intended for the use of the authorised recipient.  If you have received this e-mail in error, please delete it and notify the sender by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************

^ permalink raw reply	[flat|nested] 12+ messages in thread
end of thread, other threads:[~2001-07-10 10:26 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-07-06 12:57 [parisc-linux] palinux 0.9.1 Joël Soete
2001-07-09  7:46 ` Richard Hirst
     [not found]   ` <994679274.3b4999ea6d75d@epost.start.no>
     [not found]     ` <20010709182016.L23509@linuxcare.com>
2001-07-09 18:29       ` Andy Walker
  -- strict thread matches above, loose matches on Subject: below --
2001-07-10 10:28 Joël Soete
2001-07-09 17:43 Joël Soete
2001-07-09 19:10 ` Thomas Marteau
2001-07-09 15:42 Joël Soete
2001-07-09 17:24 ` Thomas Marteau
2001-07-06 13:25 Joël Soete
2001-07-04 16:44 Joël Soete
2001-07-06 11:08 ` Richard Hirst
2001-07-09 17:26 ` Richard Hirst

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.