Re: [parisc-linux] palinux

Re: [parisc-linux] palinux

['Richard Hirst']

On Wed, Jul 11, 2001 at 10:44:49AM +0200, Joachim Kress wrote:
> 
> 	the Workstation boot and then will stop
> 	with "BOOT_ADMIN"
> 
> 	first step:
> 	then i boot with "boot scsi.1.0" (CDROM Address)
> 	the Workstation is booting and falling back to
> 	"BOOT_ADMIN"

Hmm, ok.  I was hoping it might say something like "ipl checksum error",
or "bad lif magic".

It might be a hardware probem with the CDROM, cable, or terminators,
I suppose.  Can you try to boot over the network from a bootp server?
The README on the CD should help.

Richard

Re: [parisc-linux] palinux

['Richard Hirst']

On Tue, Jul 10, 2001 at 08:26:45AM +0200, Joachim Kress wrote:
> Hi,
> 
> on my ISO-CD, i have a directory named "dist"
> and some Files named:
> 
> 
> 	- debian
> 	- iplboot
> 	- iso

iso.conf, I hope!

> 	- README
> 	- README-ISO
> 
> 
> the CD is bootable but the HP9000 / 712 Workstation
> cannot boot with this CD !
> 
> I hope this are enough informations for You !

What happens when you try to boot from the CD?  What messages
are displayed?


Richard

[parisc-linux] palinux

[Joachim Kress]

Hello,

I have a HP9000 / 712 Workstation.

Can You tell me a general working-step for installing palinux on my =
machine
( step 1,....., step 9, ......)?


i am in confusion about your install-steps on your Website !

then i have many problems to make a bootable CDROM for my Workstation!


best regards,
		Joachim Kress


------------------------------------------------------------------------=
----
----------------
Joachim Kress			Phone:	+49-7071-409-181
Unilog Integrata Training AG	Fax.	+49-7071-409-176
Schleifm=FChleweg, 68		D1:	+49-170-7942970
D-72070 / T=FCbingen		<mailto:jkress@unilog.de>
------------------------------------------------------------------------=
----
----------------
    =20

Re: [parisc-linux] palinux

[Richard Hirst]

On Thu, Jul 05, 2001 at 03:34:39PM +0200, Joachim Kress wrote:
> Hello,
> 
> I have a HP9000 / 712 Workstation.
> 
> Can You tell me a general working-step for installing palinux on my machine
> ( step 1,....., step 9, ......)?

First wait for ESIEE to post a working 0.9.1 ISO at http://mkhppa1.esiee.fr
(the one with md5sum 473c029b513472cccab1a4d6e2156619 is broken).
Hopefully they will get a new one up on Monday.

That is a gzipped image, so uncompress it before burning a CD.

Boot the CD - it should work fine on serial or graphical console.

> i am in confusion about your install-steps on your Website !
> 
> then i have many problems to make a bootable CDROM for my Workstation!

If you cannot boot the CD, you need to set up a bootp server and
boot the lifimage file on the CD.  The README on the CD should make
that clear.  Having booted the lifimage, you may then install from
the CD or from the network.  Please post again if you still have
problems.

(if you are going to do a network install anyway, the current 0.9.1
ISO is ok - you just can't boot from it).

Richard