* Re: [parisc-linux] Problems on booting 715/80
2001-08-13 12:06 [parisc-linux] Problems on booting 715/80 Christian Weerts
@ 2001-08-13 11:05 ` Helge Deller
2001-08-13 13:38 ` Christian Weerts
0 siblings, 1 reply; 3+ messages in thread
From: Helge Deller @ 2001-08-13 11:05 UTC (permalink / raw)
To: Christian Weerts, parisc-linux
On Monday 13 August 2001 14:06, Christian Weerts wrote:
> Hi,
>
> i have some problems booting a 715/80. This machine has an svga-video
> output. When i switch the power on, the monitor does'nt display anything.
> The lights of the keyboard is blinking once, and then there is nothing
> else. Also pressing ESC during booting has no results.
> Any hints for an newbie on PA-RISC?
>
> Regards,
> Christian
Hi Christian,
you could try to press the TAB-key directly after switching on the computer.
This should bring you to a cycle-through-all-video-modes mode and let you
configure the correct monitor for your system.
Greetings,
Helge
^ permalink raw reply [flat|nested] 3+ messages in thread
* [parisc-linux] Problems on booting 715/80
@ 2001-08-13 12:06 Christian Weerts
2001-08-13 11:05 ` Helge Deller
0 siblings, 1 reply; 3+ messages in thread
From: Christian Weerts @ 2001-08-13 12:06 UTC (permalink / raw)
To: parisc-linux
Hi,
i have some problems booting a 715/80. This machine has an svga-video
output. When i switch the power on, the monitor does'nt display anything.
The lights of the keyboard is blinking once, and then there is nothing else.
Also pressing ESC during booting has no results.
Any hints for an newbie on PA-RISC?
Regards,
Christian
--
http://oldenburg.linux.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [parisc-linux] Problems on booting 715/80
2001-08-13 11:05 ` Helge Deller
@ 2001-08-13 13:38 ` Christian Weerts
0 siblings, 0 replies; 3+ messages in thread
From: Christian Weerts @ 2001-08-13 13:38 UTC (permalink / raw)
To: Helge Deller; +Cc: parisc-ml
* Helge Deller <helge.deller@sap.com> [010813 11:05]:
> On Monday 13 August 2001 14:06, Christian Weerts wrote:
> > Hi,
> >
> > i have some problems booting a 715/80. This machine has an svga-video
> > output. When i switch the power on, the monitor does'nt display anything.
> > The lights of the keyboard is blinking once, and then there is nothing
> > else. Also pressing ESC during booting has no results.
> > Any hints for an newbie on PA-RISC?
> >
> > Regards,
> > Christian
>
> Hi Christian,
>
> you could try to press the TAB-key directly after switching on the computer.
> This should bring you to a cycle-through-all-video-modes mode and let you
> configure the correct monitor for your system.
>
> Greetings,
> Helge
>
That's it! Thank's Helge.
Gruss,
Christian
--
http://oldenburg.linux.de
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-08-13 11:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-08-13 12:06 [parisc-linux] Problems on booting 715/80 Christian Weerts
2001-08-13 11:05 ` Helge Deller
2001-08-13 13:38 ` Christian Weerts
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.