* Re: (lkml)Re: floppy hang with 2.4.9-ac1x
2001-09-28 22:21 ` Alan Cox
@ 2001-09-29 16:03 ` thunder7
2001-09-29 18:34 ` Alan Cox
0 siblings, 1 reply; 4+ messages in thread
From: thunder7 @ 2001-09-29 16:03 UTC (permalink / raw)
To: Alan Cox; +Cc: linux-kernel
On Fri, Sep 28, 2001 at 11:21:42PM +0100, Alan Cox wrote:
> > 2.4.9-ac10 onwards, IIRC) hard-hangs my linux system....
>
> Knowing exactly which release would be useful
It worked with 2.4.9-ac15 and before, and it doesn't work with
2.4.9-ac16.
>
> > dual P3/700, SMP kernel, gcc-3.0.1, Abit VP6 with VIA 694X chipset,
> > mtools-3.9.7
>
> Does it occur with gcc 2.95/2.96 ?
yes, 2.4.9-ac16 crashes both with gcc-3.0.1 and with gcc-2.95.2.
>
> > the console hangs, and switching to another doesn't work. Also the
> > num-lock key is dead. The floppy light stays on, but it doesn't sound
> > like it is doing anything but spinning the motor.
> > There are no messages in the system logs.
> >
> > Any hints on what to do?
>
> Try an older gcc to eliminate that case (I dont think it is the guilty party
> but I dont trust the memory barriers in such an old ugly driver to be right)
> and then find out which precise release broke it
>
It's 2.4.9-ac16 that broke it, and I've straced it. This is in
2.4.9-ac15:
open("/home/jurriaan/.mtoolsrc", O_RDONLY) = -1 ENOENT (No such file or directory)
rt_sigaction(SIGHUP, {0x805ff50, [HUP], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {0x805ff50, [INT], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTERM, {0x805ff50, [TERM], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGQUIT, {0x805ff50, [QUIT], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
stat64("/home/jurriaan/.mcwd", 0xbffff37c) = -1 ENOENT (No such file or directory)
open("/dev/fd0", O_RDONLY|O_EXCL|O_LARGEFILE) = 4
fstat64(4, {st_mode=S_IFBLK|0660, st_rdev=makedev(2, 0), ...}) = 0
flock(4, LOCK_SH|LOCK_NB) = 0
ioctl(4, FDGETPRM, 0xbfffddd0) = 0
read(4, "\353V\220DRDOS 7\0\2\1\1\0\2\340\0@\v\360\t\0\22\0\2\0"..., 256) = 256
ioctl(4, FDGETPRM, 0xbfffe5e0) = 0
old_mmap(NULL, 151552, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4014d000
brk(0x8075000) = 0x8075000
_llseek(4, 512, [512], SEEK_SET) = 0
read(4, "\360\377\377\3@\0\5`\0\7\200\0\t\240\0\v\300\0\r\340\0"..., 17920) = 17920
open("/etc/localtime", O_RDONLY) = 5
fstat64(5, {st_mode=S_IFREG|0644, st_size=1058, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000
read(5, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\v\0\0\0\v\0"..., 4096) = 1058
close(5) = 0
and in 2.4.9-ac16 I see:
open("/home/jurriaan/.mtoolsrc", O_RDONLY) = -1 ENOENT (No such file or directory)
rt_sigaction(SIGHUP, {0x805ff50, [HUP], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {0x805ff50, [INT], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTERM, {0x805ff50, [TERM], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGQUIT, {0x805ff50, [QUIT], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
stat64("/home/jurriaan/.mcwd", 0xbffff37c) = -1 ENOENT (No such file or directory)
open("/dev/fd0", O_RDONLY|O_EXCL|O_LARGEFILE) = 4
fstat64(4, {st_mode=S_IFBLK|0660, st_rdev=makedev(2, 0), ...}) = 0
flock(4, LOCK_SH|LOCK_NB) = 0
ioctl(4, FDGETPRM, 0xbfffddd0) = 0
read(4, "\353V\220DRDOS 7\0\2\1\1\0\2\340\0@\v\360\t\0\22\0\2\0"..., 256) = 256
ioctl(4, FDGETPRM, 0xbfffe5e0) = 0
old_mmap(NULL, 151552, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4014d000
brk(0x8075000) = 0x8075000
_llseek(4, 512, [512], SEEK_SET) = 0
read(4,
and there it hangs. Also, in 2.4.9-ac16 it is reading from fd 3 for some
reason, but I couldn't quite see why. The values in the ioctl lines etc.
are the same. Exchanging mtools-3.9.7 with 3.9.8-pre6 (the latest
release) didn't change anything.
Good luck,
Jurriaan
--
Whoever thought that one up should have his head examined. Bloody minstrels...
Simon R Green - Blue Moon Rising
GNU/Linux 2.4.9-ac16 SMP/ReiserFS 2x1402 bogomips load av: 0.57 0.15 0.05
^ permalink raw reply [flat|nested] 4+ messages in thread