[parisc-linux] Fix for hppa-linux ld.so with newer binutils

[parisc-linux] Fix for hppa-linux ld.so with newer binutils

[Alan Modra]

Newer binutils don't initialise .got entries for global syms, so the
scheme used by sysdeps/hppa/dl-machine.h:elf_machine_dynamic to find
the address of .dynamic no longer works.

ChangeLog
	* sysdeps/hppa/dl-machine.h (elf_machine_dynamic):  Make it a
	const function.  Do not use &_DYNAMIC as .got entries for global
	syms are no longer initialised.  Instead they rely on the reloc,
	which hasn't yet been applied.
	(elf_machine_load_address): Make it const.  Call
	elf_machine_dynamic as that function is called fropm rtld anyway.

-- 
Alan Modra
 
Index: sysdeps/hppa/dl-machine.h
===================================================================
RCS file: /home/cvs/parisc/glibc/sysdeps/hppa/dl-machine.h,v
retrieving revision 1.41
diff -u -p -r1.41 dl-machine.h
--- dl-machine.h	2001/06/08 00:19:01	1.41
+++ dl-machine.h	2001/10/20 07:20:27
@@ -76,42 +76,40 @@ elf_machine_matches_host (const Elf32_Eh
 
 /* Return the link-time address of _DYNAMIC.  */
 static inline Elf32_Addr
+elf_machine_dynamic (void) __attribute__ ((const));
+
+static inline Elf32_Addr
 elf_machine_dynamic (void)
 {
   Elf32_Addr dynamic;
 
-#if 0
-  /* Use this method if GOT address not yet set up.  */
   asm (
 "	b,l	1f,%0\n"
 "	depi	0,31,2,%0\n"
 "1:	addil	L'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 8),%0\n"
 "	ldw	R'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 12)(%%r1),%0\n"
       : "=r" (dynamic) : : "r1");
-#else
-  /* This works because we already have our GOT address available.  */
-  dynamic = (Elf32_Addr) &_DYNAMIC;
-#endif
 
   return dynamic;
 }
 
 /* Return the run-time load address of the shared object.  */
 static inline Elf32_Addr
+elf_machine_load_address (void) __attribute__ ((const));
+
+static inline Elf32_Addr
 elf_machine_load_address (void)
 {
-  Elf32_Addr dynamic, dynamic_linkaddress;
+  Elf32_Addr dynamic;
 
   asm (
 "	b,l	1f,%0\n"
 "	depi	0,31,2,%0\n"
 "1:	addil	L'_DYNAMIC - ($PIC_pcrel$0 - 8),%0\n"
-"	ldo	R'_DYNAMIC - ($PIC_pcrel$0 - 12)(%%r1),%1\n"
-"	addil	L'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 16),%0\n"
-"	ldw	R'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 20)(%%r1),%0\n"
-   : "=r" (dynamic_linkaddress), "=r" (dynamic) : : "r1");
+"	ldo	R'_DYNAMIC - ($PIC_pcrel$0 - 12)(%%r1),%0\n"
+   : "=r" (dynamic) : : "r1");
 
-  return dynamic - dynamic_linkaddress;
+  return dynamic - elf_machine_dynamic ();
 }
 
 /* Fixup a PLT entry to bounce directly to the function at VALUE.  */

[parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Ben Collins]

On Sat, Oct 20, 2001 at 05:09:07PM +0930, Alan Modra wrote:
> Newer binutils don't initialise .got entries for global syms, so the
> scheme used by sysdeps/hppa/dl-machine.h:elf_machine_dynamic to find
> the address of .dynamic no longer works.
> 
> ChangeLog
> 	* sysdeps/hppa/dl-machine.h (elf_machine_dynamic):  Make it a
> 	const function.  Do not use &_DYNAMIC as .got entries for global
> 	syms are no longer initialised.  Instead they rely on the reloc,
> 	which hasn't yet been applied.
> 	(elf_machine_load_address): Make it const.  Call
> 	elf_machine_dynamic as that function is called fropm rtld anyway.

Is this the fix for a newly built ld.so segfaulting? If so, there seems
to be something else wrong too. Newly built ld.so still segfaults,
here's the gdb:

Starting program: /usr/src/glibc/glibc-2.2.4/./hppa-linux/obj/elf/ld.so

Program received signal SIGSEGV, Segmentation fault.
0x41003298 in _dl_start_final (arg=0xbff00414, bootstrap_map_p=0xbff00508, start_time=1090519040)
    at rtld.c:233
233       _dl_rtld_map.l_addr = bootstrap_map_p->l_addr;
(gdb) print bootstrap_map_p
$1 = (struct link_map *) 0xbff00508
(gdb) print bootstrap_map_p->l_addr
$2 = 1090519040
(gdb) print &_dl_rtld_map
$3 = (struct link_map *) 0x41029270
(gdb) print _dl_rtld_map.l_addr
$4 = 0


This is with binutils 2.11.92.0.7 and gcc-3.0.2 snapshot from 9-22-2001
(latest Debian packages available). I can give you more info if you need
it.

-- 
 .----------=======-=-======-=========-----------=====------------=-=-----.
/                   Ben Collins    --    Debian GNU/Linux                  \
`  bcollins@debian.org  --  bcollins@openldap.org  --  bcollins@linux.com  '
 `---=========------=======-------------=-=-----=-===-======-------=--=---'

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Alan Modra]

On Sat, Oct 20, 2001 at 09:54:06AM -0400, Ben Collins wrote:
> On Sat, Oct 20, 2001 at 05:09:07PM +0930, Alan Modra wrote:
> > 	* sysdeps/hppa/dl-machine.h (elf_machine_dynamic):  Make it a
> > 	const function.  Do not use &_DYNAMIC as .got entries for global
> > 	syms are no longer initialised.  Instead they rely on the reloc,
> > 	which hasn't yet been applied.
> > 	(elf_machine_load_address): Make it const.  Call
> > 	elf_machine_dynamic as that function is called fropm rtld anyway.
> 
> Is this the fix for a newly built ld.so segfaulting? If so, there seems
> to be something else wrong too. Newly built ld.so still segfaults,
> here's the gdb:

alan@tea:~$ /lib/ld.so.1 
Usage: ld.so [OPTION]... EXECUTABLE-FILE [ARGS-FOR-PROGRAM...]
You have invoked `ld.so', the helper program for shared library executables.
[snip]

no problems here.

sourceware CVS binutils as of a few minutes ago, debian glibc-2.2.4-3
with willy's patch (ftp://ftp.parisc-linux.org/patches/glibc22-hppa.dpatch)
+ mine, gcc from pehc 3.0.2 20010829.

So, I'm using a newer binutils but older gcc.  The old gcc was an
accident - I'll try again with something more recent.  binutils, gcc and
glibc freshly built on an x86-linux system, first building xtools then
native ones.

> Program received signal SIGSEGV, Segmentation fault.
> 0x41003298 in _dl_start_final (arg=0xbff00414, bootstrap_map_p=0xbff00508, start_time=1090519040)
>     at rtld.c:233
> 233       _dl_rtld_map.l_addr = bootstrap_map_p->l_addr;
> (gdb) print bootstrap_map_p
> $1 = (struct link_map *) 0xbff00508
> (gdb) print bootstrap_map_p->l_addr
> $2 = 1090519040
> (gdb) print &_dl_rtld_map
> $3 = (struct link_map *) 0x41029270
> (gdb) print _dl_rtld_map.l_addr
> $4 = 0

That's weird.  Looks like _dl_rtld_map is in a read-only segment, when
it ought to be in .bss

alan@tea:~$ nm /lib/ld.so.1 | grep dl_rtld_map
00029368 b _dl_rtld_map
alan@tea:~$ objdump -h /lib/ld.so.1 | grep '\.bss'
 15 .bss          00000f9c  00029220  00029220  00019220  2**3

Hmm, I wonder if the machine instructions actually doing the assignment
have relocs that haven't been applied for some reason.  That would
probably result in your ld.so trying to write to 0x29270.

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Ben Collins]

On Sun, Oct 21, 2001 at 12:04:44AM +0930, Alan Modra wrote:
> On Sat, Oct 20, 2001 at 09:54:06AM -0400, Ben Collins wrote:
> > On Sat, Oct 20, 2001 at 05:09:07PM +0930, Alan Modra wrote:
> > > 	* sysdeps/hppa/dl-machine.h (elf_machine_dynamic):  Make it a
> > > 	const function.  Do not use &_DYNAMIC as .got entries for global
> > > 	syms are no longer initialised.  Instead they rely on the reloc,
> > > 	which hasn't yet been applied.
> > > 	(elf_machine_load_address): Make it const.  Call
> > > 	elf_machine_dynamic as that function is called fropm rtld anyway.
> > 
> > Is this the fix for a newly built ld.so segfaulting? If so, there seems
> > to be something else wrong too. Newly built ld.so still segfaults,
> > here's the gdb:
> 
> alan@tea:~$ /lib/ld.so.1 
> Usage: ld.so [OPTION]... EXECUTABLE-FILE [ARGS-FOR-PROGRAM...]
> You have invoked `ld.so', the helper program for shared library executables.
> [snip]
> 
> no problems here.
> 
> sourceware CVS binutils as of a few minutes ago, debian glibc-2.2.4-3
> with willy's patch (ftp://ftp.parisc-linux.org/patches/glibc22-hppa.dpatch)
> + mine, gcc from pehc 3.0.2 20010829.
> 
> So, I'm using a newer binutils but older gcc.  The old gcc was an
> accident - I'll try again with something more recent.  binutils, gcc and
> glibc freshly built on an x86-linux system, first building xtools then
> native ones.

The binutils may be the difference. I think Randolph said there was a
patch in CVS that was needed. I'll wait and see if that new package
works.

-- 
 .----------=======-=-======-=========-----------=====------------=-=-----.
/                   Ben Collins    --    Debian GNU/Linux                  \
`  bcollins@debian.org  --  bcollins@openldap.org  --  bcollins@linux.com  '
 `---=========------=======-------------=-=-----=-===-======-------=--=---'

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Ben Collins]

Ok. Seems there are some other issues still. I'm using the .10-1
binutils, and the latest patches for glibc. At first I thought the
testsuite was running through perfectly, until I realized that it was
because most of the tests weren't being run. The configure script thinks
it is cross-compiling, because it can't even run a simple test program.

Not to mention I am getting random segv's in the rest of the toolchain.
I went back to a UP kernel suspecting it to be the cause. Now I'm
getting a segv during the package builds due to a segv in the strip
program (that may be a binutils bug).

So, back to square one. I don't have time tonight to start looking at
this, so I'll start on it tomorrow.

BTW, most of the iconv/locales tests fail in glibc on parisc.

Ben

-- 
 .----------=======-=-======-=========-----------=====------------=-=-----.
/                   Ben Collins    --    Debian GNU/Linux                  \
`  bcollins@debian.org  --  bcollins@openldap.org  --  bcollins@linux.com  '
 `---=========------=======-------------=-=-----=-===-======-------=--=---'

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Randolph Chung]

Ben,

> Not to mention I am getting random segv's in the rest of the toolchain.
> I went back to a UP kernel suspecting it to be the cause. Now I'm
> getting a segv during the package builds due to a segv in the strip
> program (that may be a binutils bug).
> 
> So, back to square one. I don't have time tonight to start looking at
> this, so I'll start on it tomorrow.
> 
> BTW, most of the iconv/locales tests fail in glibc on parisc.

do you have a build log? if so can you put it on, say, auric?

also please show dpkg -s output for binutils and gcc-3.0

we seem to be getting some random segvs on A500's. James sees them a lot
on the hppa buildd (sarti). I have a feeling the toolchain might not be
at fault in this case.

if you'd like please post the source and I can try to build it here. i'm
building 2.2.4-3 with the newest tool bits at the moment. basic things
seem to be ok, but it'll take an hour or more for it to finish.

randolph
-- 
Debian Developer <tausq@debian.org>
http://www.TauSq.org/

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Ben Collins]

On Wed, Oct 24, 2001 at 05:56:43PM -0700, Randolph Chung wrote:
> Ben,
> 
> > Not to mention I am getting random segv's in the rest of the toolchain.
> > I went back to a UP kernel suspecting it to be the cause. Now I'm
> > getting a segv during the package builds due to a segv in the strip
> > program (that may be a binutils bug).
> > 
> > So, back to square one. I don't have time tonight to start looking at
> > this, so I'll start on it tomorrow.
> > 
> > BTW, most of the iconv/locales tests fail in glibc on parisc.
> 
> do you have a build log? if so can you put it on, say, auric?

The build finished without error, so it's of little use. The test suite
output is just a lot og Error 139's, so it too isn't much help.

> also please show dpkg -s output for binutils and gcc-3.0

binutils 2.11.92.0.10-1
gcc-3.0 3.0.2-0pre010922

I'm going to upgrade and try again.

> we seem to be getting some random segvs on A500's. James sees them a lot
> on the hppa buildd (sarti). I have a feeling the toolchain might not be
> at fault in this case.

Agreed. In fact, the machine locked up twice while doing a "debian/rules
clean", which is obviously not a toolchain problem :)

> if you'd like please post the source and I can try to build it here. i'm
> building 2.2.4-3 with the newest tool bits at the moment. basic things
> seem to be ok, but it'll take an hour or more for it to finish.

Will be uploading it later tonight. I have 5 other archs done, so I am
going to upload all of that.

-- 
 .----------=======-=-======-=========-----------=====------------=-=-----.
/                   Ben Collins    --    Debian GNU/Linux                  \
`  bcollins@debian.org  --  bcollins@openldap.org  --  bcollins@linux.com  '
 `---=========------=======-------------=-=-----=-===-======-------=--=---'

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Matthew Wilcox]

On Wed, Oct 24, 2001 at 07:51:02PM -0400, Ben Collins wrote:
> BTW, most of the iconv/locales tests fail in glibc on parisc.

That's a regression.  According to my whiteboard, the tests that were
failing with 2.2.3-9 were:

 dlfcn/default
 posix/globtest
 gmon/tst-sprofil
 elf/resolvfail
     constload1
     vismain
     neededtest{,2,3,4}
     lateglobal

-- 
Revolutions do not require corporate support.

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Ben Collins]

On Thu, Oct 25, 2001 at 04:07:21PM +0100, Matthew Wilcox wrote:
> On Wed, Oct 24, 2001 at 07:51:02PM -0400, Ben Collins wrote:
> > BTW, most of the iconv/locales tests fail in glibc on parisc.
> 
> That's a regression.  According to my whiteboard, the tests that were
> failing with 2.2.3-9 were:
> 
>  dlfcn/default
>  posix/globtest
>  gmon/tst-sprofil
>  elf/resolvfail
>      constload1
>      vismain
>      neededtest{,2,3,4}
>      lateglobal

Even with the newest gcc 3.0.2 in sid, I get those failures. Make sure
when you guys are compiling that in hppa-linux/obj/config.make, that
cross_compile isn't set to yes. For some reason, I am getting this, and
when that's set, most of the testsuite isn't run.

I do have a compiled set of packages, installed, that are working.
They'll be uploaded with 2.2.4-4.

Ben

-- 
 .----------=======-=-======-=========-----------=====------------=-=-----.
/                   Ben Collins    --    Debian GNU/Linux                  \
`  bcollins@debian.org  --  bcollins@openldap.org  --  bcollins@linux.com  '
 `---=========------=======-------------=-=-----=-===-======-------=--=---'

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Alan Modra]

On Sun, Oct 21, 2001 at 12:04:43AM +0930, Alan Modra wrote:
> alan@tea:~$ /lib/ld.so.1 
> Usage: ld.so [OPTION]... EXECUTABLE-FILE [ARGS-FOR-PROGRAM...]
> You have invoked `ld.so', the helper program for shared library executables.
> [snip]
> 
> no problems here.
> 
> sourceware CVS binutils as of a few minutes ago, debian glibc-2.2.4-3
> with willy's patch (ftp://ftp.parisc-linux.org/patches/glibc22-hppa.dpatch)
> + mine, gcc from pehc 3.0.2 20010829.

Confession time.  I had one little patch in ld which disabled Jakub's
combreloc code as a side-effect.  (I had ldmain.c:main,
link_info.spare_dynamic_tags = 0; to minimise differences between objects
generated by new vs. old binutils).  Setting this back to 5 gives me the
segv you reported.  :-(

The reason is that binutils/bfd/elf32_hppa.c:elf32_hppa_reloc_type_class

  if (ELF32_R_SYM (rela->r_info) == 0)
    return reloc_class_relative;

disagrees with glibc/sysdeps/hppa/dl-machine.h:elf_machine_rela_relative

/* XXX Nothing to do.  There is no relative relocation, right?  */

The net result of this disagreement is that ld.so doesn't relocate any
of the relocs in reloc_class_relative.  Testing an implementation of
elf_machine_rela_relative now.

Alan

Re: [parisc-linux] Fix for hppa-linux ld.so with newer binutils

[Carlos O'Donell Jr.]

> Newer binutils don't initialise .got entries for global syms, so the
> scheme used by sysdeps/hppa/dl-machine.h:elf_machine_dynamic to find
> the address of .dynamic no longer works.
> 
> ChangeLog
> 	* sysdeps/hppa/dl-machine.h (elf_machine_dynamic):  Make it a
> 	const function.  Do not use &_DYNAMIC as .got entries for global
> 	syms are no longer initialised.  Instead they rely on the reloc,
> 	which hasn't yet been applied.
> 	(elf_machine_load_address): Make it const.  Call
> 	elf_machine_dynamic as that function is called fropm rtld anyway.
>

I was beggining to wonder...

  /* Figure out the run-time load address of the dynamic linker itself.  */
  bootstrap_map.l_addr = elf_machine_load_address ();

  /* Read our own dynamic section and fill in the info array.  */
  bootstrap_map.l_ld = (void *) bootstrap_map.l_addr + elf_machine_dynamic ();
  elf_get_dynamic_info (&bootstrap_map);

_dl_start (0x41002b74).... 
_dl_start+312 (Assertion failure with wrong address for initialized data) 

Why aren't .got entries being initialised?

So you are saying we need to make all of our global symbols constant
so that we can access them during the bootstrap? (No more _DYNMAIC?)

And that elf_machine_load_address is trying to access symbols that aren't
setup yet, because ELF_DYNAMIC_RELOCATE() hasn't been run yet?
And thus hasn't setup any of our offsets... where has my pic code gone ;(

c.

Re: [parisc-linux] Fix for hppa-linux ld.so with newer binutils

[Alan Modra]

On Sat, Oct 20, 2001 at 02:01:53PM -0400, Carlos O'Donell Jr. wrote:
> 
> Why aren't .got entries being initialised?

The special reserved .got entries are still initialised.  The others
which have relocations don't need to be initialised as the reloc will
set the value.  It was only an accident that entries against _DYNAMIC
(_not_ the special reserved entry with the value of _DYNAMIC) were
previously being initialised.

> So you are saying we need to make all of our global symbols constant
> so that we can access them during the bootstrap? (No more _DYNMAIC?)
> 
> And that elf_machine_load_address is trying to access symbols that aren't
> setup yet, because ELF_DYNAMIC_RELOCATE() hasn't been run yet?
> And thus hasn't setup any of our offsets... where has my pic code gone ;(

As you say, the problem is solved by pic code, and that's exactly how
the new hppa version of elf_machine_dynamic works.

Note that glibc ld.so still has a problem on hppa if it ever hits any
of the asserts in dynamic-link.h:elf_get_dynamic_info, as these all try
to make reference to their string args at the unrelocated address.

Alan

[parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Alan Modra]

On Sat, Oct 20, 2001 at 05:09:07PM +0930, Alan Modra wrote:
> 	* sysdeps/hppa/dl-machine.h (elf_machine_dynamic):  Make it a
> 	const function.  Do not use &_DYNAMIC as .got entries for global
> 	syms are no longer initialised.  Instead they rely on the reloc,
> 	which hasn't yet been applied.
> 	(elf_machine_load_address): Make it const.  Call
> 	elf_machine_dynamic as that function is called fropm rtld anyway.

The following, which includes the above patch, should allow glibc to
once again work on hppa-linux with current binutils.  A number of other
horrible things fixed:

a) ELF_MACHINE_PLTREL_OVERLAP defined.  This should have been defined
   right from the first hppa-linux glibc port.  Resulted in all the .plt
   relocs being processed twice, and meant that Jakub's optimisation
   with elf_machine_rel_relative didn't work.
b) It's true that hppa doesn't have an R_PARISC_RELATIVE reloc.  However,
   hppa-linux uses a scheme that gives the same benefits;  Normal relocs
   with a symbol index of zero.  Actually, this has an added benefit in
   that you can effectively have a "relative" IPLT reloc (Might be
   useful for prelinking).  I added code to binutils to tag these relocs
   as reloc_class_relative but didn't implement elf_machine_rela_relative,
   with the net result that many relocations weren't being applied.
c) .got section entries other than the reserved ones, are not longer
   read.
d) As for c) with lazy linking .plt entries.

glibc/ChangeLog
	* sysdeps/hppa/dl-fptr.h (_dl_lookup_address): Warning fix.
	* sysdeps/hppa/dl-machine.h (elf_machine_dynamic): Make it a const
	function.  Do not use &_DYNAMIC as .got entries are no longer
	initialised since we are a rela target.
        (elf_machine_load_address): Make it const.  Call
        elf_machine_dynamic as that function is called fropm rtld anyway.
	(runtime_got): New function.
	(elf_machine_runtime_setup): Use runtime_got and modify code
	handling IPLT so that .plt section contents need not be read.
	(_start): Formatting fixes.
	(ELF_MACHINE_PLTREL_OVERLAP): Define.
	(TRAMPOLINE_TEMPLATE): Don't use multi-line string literals.
	(elf_machine_rela): Likewise.
	(elf_machine_rela_relative): Implement.  Add "map" param.
	* sysdeps/alpha/dl-machine.h (elf_machine_rela_relative): Add "map".
	* sysdeps/arm/dl-machine.h (elf_machine_rel_relative): Ditto.
	* sysdeps/cris/dl-machine.h (elf_machine_rela_relative): Ditto.
	* sysdeps/i386/dl-machine.h (elf_machine_rel_relative): Ditto.
	* sysdeps/ia64/dl-machine.h (elf_machine_rela_relative): Ditto.
	* sysdeps/m68k/dl-machine.h (elf_machine_rela_relative): Ditto.
	* sysdeps/mips/mips64/dl-machine.h (elf_machine_rel_relative): Ditto.
	* sysdeps/mips/dl-machine.h (elf_machine_rel_relative): Ditto.
	* sysdeps/powerpc/dl-machine.h (elf_machine_rela_relative): Ditto.
	* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela_relative): Ditto.
	* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela_relative): Ditto.
	* sysdeps/sh/dl-machine.h (elf_machine_rela_relative): Ditto.
	* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela_relative): Ditto
	* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela_relative): Ditto
	* sysdeps/x86_64/dl-machine.h (elf_machine_rela_relative): Ditto.
	* elf/do-rel.h (elf_dynamic_do_rel): Modify call to suit.

-- 
Alan Modra

diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/elf/do-rel.h glibc-2.2.4-3/elf/do-rel.h
--- glibc-2.2.4-3.orig/elf/do-rel.h	Mon Oct 22 14:15:44 2001
+++ glibc-2.2.4-3/elf/do-rel.h	Mon Oct 22 20:36:37 2001
@@ -86,7 +86,7 @@ elf_dynamic_do_rel (struct link_map *map
 # endif
 #endif
 	  for (; relative < r; ++relative)
-	    elf_machine_rel_relative (l_addr, relative,
+	    elf_machine_rel_relative (map, l_addr, relative,
 				      (void *) (l_addr + relative->r_offset));
 
       if (map->l_info[VERSYMIDX (DT_VERSYM)])
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/alpha/dl-machine.h glibc-2.2.4-3/sysdeps/alpha/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/alpha/dl-machine.h	Mon Oct 22 14:15:48 2001
+++ glibc-2.2.4-3/sysdeps/alpha/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -537,7 +537,8 @@ elf_machine_rela (struct link_map *map,
 }
 
 static inline void
-elf_machine_rela_relative (Elf64_Addr l_addr, const Elf64_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf64_Addr l_addr,
+			   const Elf64_Rela *reloc,
 			   Elf64_Addr *const reloc_addr)
 {
   /* XXX Make some timings.  Maybe it's preverable to test for
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/arm/dl-machine.h glibc-2.2.4-3/sysdeps/arm/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/arm/dl-machine.h	Mon Oct 22 14:15:48 2001
+++ glibc-2.2.4-3/sysdeps/arm/dl-machine.h	Mon Oct 22 12:22:09 2001
@@ -518,7 +518,8 @@ elf_machine_rel (struct link_map *map, c
 }
 
 static inline void
-elf_machine_rel_relative (Elf32_Addr l_addr, const Elf32_Rel *reloc,
+elf_machine_rel_relative (struct link_map *map, Elf32_Addr l_addr,
+			  const Elf32_Rel *reloc,
 			  Elf32_Addr *const reloc_addr)
 {
   *reloc_addr += l_addr;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/cris/dl-machine.h glibc-2.2.4-3/sysdeps/cris/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/cris/dl-machine.h	Mon Oct 22 14:15:48 2001
+++ glibc-2.2.4-3/sysdeps/cris/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -366,7 +366,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf32_Addr l_addr, const Elf32_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf32_Addr l_addr,
+			   const Elf32_Rela *reloc,
 			   Elf32_Addr *const reloc_addr)
 {
   *reloc_addr = l_addr + reloc->r_addend;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/hppa/dl-fptr.c glibc-2.2.4-3/sysdeps/hppa/dl-fptr.c
--- glibc-2.2.4-3.orig/sysdeps/hppa/dl-fptr.c	Mon Oct 22 14:22:23 2001
+++ glibc-2.2.4-3/sysdeps/hppa/dl-fptr.c	Mon Oct 22 14:04:04 2001
@@ -188,7 +188,8 @@ _dl_lookup_address (const void *address)
   Elf32_Addr addr = (Elf32_Addr) address;
   struct hppa_fptr *f;
 
-  address = (unsigned long)address &~ 3; /* Clear the bottom two bits.  See make_fptr. */
+ /* Clear the bottom two bits.  See make_fptr. */
+  address = (const void *) ((unsigned long) address &~ 3);
 
 #ifdef _LIBC_REENTRANT
   /* Make sure we are alone.  */
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/hppa/dl-machine.h glibc-2.2.4-3/sysdeps/hppa/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/hppa/dl-machine.h	Mon Oct 22 14:22:23 2001
+++ glibc-2.2.4-3/sysdeps/hppa/dl-machine.h	Mon Oct 22 22:16:09 2001
@@ -73,45 +73,59 @@ elf_machine_matches_host (const Elf32_Eh
   return ehdr->e_machine == EM_PARISC;
 }
 
+/* Return the run-time address of .got.  */
+static inline Elf32_Addr
+runtime_got (void) __attribute__ ((const));
+
+static inline Elf32_Addr
+runtime_got (void)
+{
+  Elf32_Addr got;
+
+  asm ("b,l	1f,%0\n"
+"	depi	0,31,2,%0\n"
+"1:	addil	L'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 8),%0\n"
+"	ldo	R'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 12)(%%r1),%0"
+       : "=r" (got) : : "r1");
+
+  return got;
+}
 
 /* Return the link-time address of _DYNAMIC.  */
 static inline Elf32_Addr
+elf_machine_dynamic (void) __attribute__ ((const));
+
+static inline Elf32_Addr
 elf_machine_dynamic (void)
 {
   Elf32_Addr dynamic;
 
-#if 0
-  /* Use this method if GOT address not yet set up.  */
-  asm (
-"	b,l	1f,%0\n"
+  asm ("b,l	1f,%0\n"
 "	depi	0,31,2,%0\n"
 "1:	addil	L'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 8),%0\n"
 "	ldw	R'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 12)(%%r1),%0\n"
-      : "=r" (dynamic) : : "r1");
-#else
-  /* This works because we already have our GOT address available.  */
-  dynamic = (Elf32_Addr) &_DYNAMIC;
-#endif
+       : "=r" (dynamic) : : "r1");
 
   return dynamic;
 }
 
 /* Return the run-time load address of the shared object.  */
 static inline Elf32_Addr
+elf_machine_load_address (void) __attribute__ ((const));
+
+static inline Elf32_Addr
 elf_machine_load_address (void)
 {
-  Elf32_Addr dynamic, dynamic_linkaddress;
+  Elf32_Addr dynamic;
 
   asm (
 "	b,l	1f,%0\n"
 "	depi	0,31,2,%0\n"
 "1:	addil	L'_DYNAMIC - ($PIC_pcrel$0 - 8),%0\n"
-"	ldo	R'_DYNAMIC - ($PIC_pcrel$0 - 12)(%%r1),%1\n"
-"	addil	L'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 16),%0\n"
-"	ldw	R'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 20)(%%r1),%0\n"
-   : "=r" (dynamic_linkaddress), "=r" (dynamic) : : "r1");
+"	ldo	R'_DYNAMIC - ($PIC_pcrel$0 - 12)(%%r1),%0\n"
+   : "=r" (dynamic) : : "r1");
 
-  return dynamic - dynamic_linkaddress;
+  return dynamic - elf_machine_dynamic ();
 }
 
 /* Fixup a PLT entry to bounce directly to the function at VALUE.  */
@@ -174,13 +188,6 @@ elf_machine_runtime_setup (struct link_m
 	      fptr = (struct hppa_fptr *) (reloc->r_offset + l_addr);
 	      if (r_sym != 0)
 		{
-		  /* Relocate the pointer to the stub.  */
-		  fptr->func += l_addr;
-		  /* Instead of the LTP value, we put the reloc offset
-		     here.  The trampoline code will load the proper
-		     LTP and pass the reloc offset to the fixup
-		     function.  */
-		  fptr->gp = iplt - jmprel;
 		  if (!got)
 		    {
 		      static union {
@@ -188,27 +195,22 @@ elf_machine_runtime_setup (struct link_m
 			Elf32_Addr i[2];
 		      } sig = {{0x00,0xc0,0xff,0xee, 0xde,0xad,0xbe,0xef}};
 
-		      /* Find our .got section.  It's right after the
-			 stub.  */
-		      got = (Elf32_Addr *) (fptr->func + GOT_FROM_PLT_STUB);
-
-		      /* Sanity check to see if the address we are
-                         going to check below is within a reasonable
-                         approximation of the bounds of the PLT (or,
-                         at least, is at an address that won't fault
-                         on read).  Then check for the magic signature
-                         above. */
-		      if (fptr->func < (Elf32_Addr) fptr + sizeof(*fptr))
-			  return 0;
-		      if (fptr->func >
-			  ((Elf32_Addr) fptr
-			   + SIZEOF_PLT_STUB
-			   + ((l->l_info[DT_PLTRELSZ]->d_un.d_val / sizeof (Elf32_Rela))
-			      * 8)))
-			return 0;
+		      got = (Elf32_Addr *) runtime_got ();
+
+		      /* The .got section is right after the .plt stub. 
+			 Check the magic signature.  */
 		      if (got[-2] != sig.i[0] || got[-1] != sig.i[1])
 			return 0; /* No lazy linking for you! */
 		    }
+
+		  /* Relocate the pointer to the stub.  */
+		  fptr->func = (Elf32_Addr) got - GOT_FROM_PLT_STUB;
+
+		  /* Instead of the LTP value, we put the reloc offset
+		     here.  The trampoline code will load the proper
+		     LTP and pass the reloc offset to the fixup
+		     function.  */
+		  fptr->gp = iplt - jmprel;
 		}
 	      else
 		{
@@ -278,22 +280,24 @@ asm (									\
 "	stw	%r25,-40(%sp)\n" /* argc */				\
 "	stw	%r24,-44(%sp)\n" /* argv */				\
 									\
-	/* We need the LTP, and we need it now. */			\
-	/* $PIC_pcrel$0 points 8 bytes past the current instruction,	\
-	   just like a branch reloc.  This sequence gets us the runtime	\
-	   address of _DYNAMIC. */					\
+	/* We need the LTP, and we need it now.				\
+	   $PIC_pcrel$0 points 8 bytes past the current instruction,	\
+	   just like a branch reloc.  This sequence gets us the		\
+	   runtime address of _DYNAMIC. */				\
 "	bl	0f,%r19\n"						\
 "	depi	0,31,2,%r19\n"	/* clear priviledge bits */		\
 "0:	addil	L'_DYNAMIC - ($PIC_pcrel$0 - 8),%r19\n"			\
 "	ldo	R'_DYNAMIC - ($PIC_pcrel$0 - 12)(%r1),%r26\n"		\
 									\
-	/* Also get the link time address from the first entry of the GOT.  */ \
+	/* The link time address is stored in the first entry of the	\
+	   GOT.  */							\
 "	addil	L'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 16),%r19\n"	\
 "	ldw	R'_GLOBAL_OFFSET_TABLE_ - ($PIC_pcrel$0 - 20)(%r1),%r20\n" \
 									\
 "	sub	%r26,%r20,%r20\n"	/* Calculate load offset */	\
 									\
-	/* Rummage through the dynamic entries, looking for DT_PLTGOT.  */ \
+	/* Rummage through the dynamic entries, looking for		\
+	   DT_PLTGOT.  */						\
 "	ldw,ma	8(%r26),%r19\n"						\
 "1:	cmpib,=,n 3,%r19,2f\n"	/* tag == DT_PLTGOT? */			\
 "	cmpib,<>,n 0,%r19,1b\n"						\
@@ -313,8 +317,8 @@ asm (									\
 	   |         32 bytes of magic       |				\
 	   |---------------------------------|				\
 	   | 32 bytes argument/sp save area  |				\
-	   |---------------------------------|  ((current->mm->env_end) + 63 & ~63) \
-	   |         N bytes of slack        |				\
+	   |---------------------------------|  ((current->mm->env_end)	\
+	   |         N bytes of slack        |	 + 63 & ~63)		\
 	   |---------------------------------|				\
 	   |      envvar and arg strings     |				\
 	   |---------------------------------|				\
@@ -382,7 +386,7 @@ asm (									\
 "	bl	_dl_init,%r2\n"						\
 "	ldo	4(%r23),%r23\n"	/* delay slot */			\
 									\
-	/* Reload argc, argv  to the registers start.S expects them in (feh) */ \
+	/* Reload argc, argv to the registers start.S expects.  */	\
 "	ldw	-40(%sp),%r25\n"					\
 "	ldw	-44(%sp),%r24\n"					\
 									\
@@ -394,8 +398,8 @@ asm (									\
 "	.word	0xdeadbeef\n"						\
 "	.previous\n"							\
 									\
-	/* %r3 contains a function pointer, we need to mask out the lower \
-	 * bits and load the gp and jump address. */			\
+	/* %r3 contains a function pointer, we need to mask out the	\
+	   lower bits and load the gp and jump address. */		\
 "	depi	0,31,2,%r3\n"						\
 "	ldw	0(%r3),%r2\n"						\
 "	addil	LT'__dl_fini_plabel,%r19\n"				\
@@ -413,42 +417,40 @@ asm (									\
    Enter with r19 = reloc offset, r20 = got-8, r21 = fixup ltp.  */
 #define TRAMPOLINE_TEMPLATE(tramp_name, fixup_name) \
   extern void tramp_name (void);		    \
-  asm ( "\
-	/* Trampoline for " #tramp_name " */
-	.globl " #tramp_name "
-	.type " #tramp_name ",@function
-" #tramp_name ":
-	/* Save return pointer */
-	stw	%r2,-20(%sp)
-	/* Save argument registers in the call stack frame. */
-	stw	%r26,-36(%sp)
-	stw	%r25,-40(%sp)
-	stw	%r24,-44(%sp)
-	stw	%r23,-48(%sp)
-	/* Build a call frame. */
-	stwm	%sp,64(%sp)
-
-	/* Set up args to fixup func.  */
-	ldw	8+4(%r20),%r26	/* got[1] == struct link_map *  */
-	copy	%r19,%r25	/* reloc offset  */
-
-	/* Call the real address resolver. */
-	bl	" #fixup_name ",%r2
-	copy	%r21,%r19	/* delay slot, set fixup func ltp */
-
-	ldwm	-64(%sp),%sp
-	/* Arguments. */
-	ldw	-36(%sp),%r26
-	ldw	-40(%sp),%r25
-	ldw	-44(%sp),%r24
-	ldw	-48(%sp),%r23
-	/* Return pointer. */
-	ldw	-20(%sp),%r2
-	/* Call the real function. */
-	ldw	0(%r28),%r22
-	bv	%r0(%r22)
-	ldw	4(%r28),%r19
-");
+  asm (".globl " #tramp_name "\n"					\
+"	.type " #tramp_name ",@function\n"				\
+ #tramp_name ":\n"							\
+	/* Save return pointer */					\
+"	stw	%r2,-20(%sp)\n"						\
+	/* Save argument registers in the call stack frame. */		\
+"	stw	%r26,-36(%sp)\n"					\
+"	stw	%r25,-40(%sp)\n"					\
+"	stw	%r24,-44(%sp)\n"					\
+"	stw	%r23,-48(%sp)\n"					\
+	/* Build a call frame. */					\
+"	stwm	%sp,64(%sp)\n"						\
+									\
+	/* Set up args to fixup func.  */				\
+"	ldw	8+4(%r20),%r26\n" /* got[1] == struct link_map *  */	\
+"	copy	%r19,%r25\n"	  /* reloc offset  */			\
+									\
+	/* Call the real address resolver. */				\
+"	bl	" #fixup_name ",%r2\n"					\
+"	copy	%r21,%r19\n"	  /* delay slot, set fixup func ltp */	\
+									\
+"	ldwm	-64(%sp),%sp\n"						\
+	/* Arguments. */						\
+"	ldw	-36(%sp),%r26\n"					\
+"	ldw	-40(%sp),%r25\n"					\
+"	ldw	-44(%sp),%r24\n"					\
+"	ldw	-48(%sp),%r23\n"					\
+	/* Return pointer. */						\
+"	ldw	-20(%sp),%r2\n"						\
+	/* Call the real function. */					\
+"	ldw	0(%r28),%r22\n"						\
+"	bv	%r0(%r22)\n"						\
+"	ldw	4(%r28),%r19\n"						\
+       );
 
 #ifndef PROF
 #define ELF_MACHINE_RUNTIME_TRAMPOLINE			\
@@ -476,6 +478,9 @@ asm (									\
 /* We only use RELA. */
 #define ELF_MACHINE_NO_REL 1
 
+/* DT_RELASZ includes .rela.plt  */
+#define ELF_MACHINE_PLTREL_OVERLAP 1
+
 /* Return the address of the entry point. */
 #define ELF_MACHINE_START_ADDRESS(map, start) \
   DL_FUNCTION_ADDRESS (map, start)
@@ -538,7 +543,7 @@ elf_machine_rela (struct link_map *map, 
 	return;
 #endif
       /* .eh_frame can have unaligned relocs.  */
-      if ((unsigned long)reloc_addr & 3)
+      if ((unsigned long) reloc_addr & 3)
 	{
 	  char *rel_addr = (char *) reloc_addr;
 	  rel_addr[0] = value >> 24;
@@ -574,14 +579,14 @@ elf_machine_rela (struct link_map *map, 
 	   probably haven't relocated the necessary values by this
 	   point so we have to find them ourselves. */
 
-	asm ("bl	0f,%0
-	      depi	0,31,2,%0
-0:	      addil	L'__boot_ldso_fptr - ($PIC_pcrel$0 - 8),%0
-	      ldo	R'__boot_ldso_fptr - ($PIC_pcrel$0 - 12)(%%r1),%1
-	      addil	L'__fptr_root - ($PIC_pcrel$0 - 16),%0
-	      ldo	R'__fptr_root - ($PIC_pcrel$0 - 20)(%%r1),%2
-	      addil	L'__fptr_count - ($PIC_pcrel$0 - 24),%0
-	      ldo	R'__fptr_count - ($PIC_pcrel$0 - 28)(%%r1),%3"
+	asm ("bl	0f,%0\n\t"
+	     "depi	0,31,2,%0\n\t"
+	     "0:\taddil	L'__boot_ldso_fptr - ($PIC_pcrel$0 - 8),%0\n\t"
+	     "ldo	R'__boot_ldso_fptr - ($PIC_pcrel$0 - 12)(%%r1),%1\n\t"
+	     "addil	L'__fptr_root - ($PIC_pcrel$0 - 16),%0\n\t"
+	     "ldo	R'__fptr_root - ($PIC_pcrel$0 - 20)(%%r1),%2\n\t"
+	     "addil	L'__fptr_count - ($PIC_pcrel$0 - 24),%0\n\t"
+	     "ldo	R'__fptr_count - ($PIC_pcrel$0 - 28)(%%r1),%3"
 	     :
 	     "=r" (dot),
 	     "=r" (p_boot_ldso_fptr),
@@ -635,11 +640,51 @@ elf_machine_rela (struct link_map *map, 
   *reloc_addr = value;
 }
 
+/* hppa doesn't have an R_PARISC_RELATIVE reloc, but uses relocs with
+   ELF32_R_SYM (info) == 0 for a similar purpose.  */
 static inline void
-elf_machine_rela_relative (Elf32_Addr l_addr, const Elf32_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf32_Addr l_addr,
+			   const Elf32_Rela *reloc,
 			   Elf32_Addr *const reloc_addr)
 {
-  /* XXX Nothing to do.  There is no relative relocation, right?  */
+  unsigned long const r_type = ELF32_R_TYPE (reloc->r_info);
+  Elf32_Addr value;
+
+  value = l_addr + reloc->r_addend;
+
+  if (ELF32_R_SYM (reloc->r_info) != 0)
+    asm volatile ("iitlbp	%r0,(%r0)");  /* Crash. */
+
+  switch (r_type)
+    {
+    case R_PARISC_DIR32:
+      /* .eh_frame can have unaligned relocs.  */
+      if ((unsigned long) reloc_addr & 3)
+	{
+	  char *rel_addr = (char *) reloc_addr;
+	  rel_addr[0] = value >> 24;
+	  rel_addr[1] = value >> 16;
+	  rel_addr[2] = value >> 8;
+	  rel_addr[3] = value;
+	  return;
+	}
+      break;
+
+    case R_PARISC_PLABEL32:
+      break;
+
+    case R_PARISC_IPLT:
+      elf_machine_fixup_plt (NULL, map, reloc, reloc_addr, value);
+      return;
+
+    case R_PARISC_NONE:
+      return;
+
+    default:
+      _dl_reloc_bad_type (map, r_type, 0);
+    }
+
+  *reloc_addr = value;
 }
 
 static inline void
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/i386/dl-machine.h glibc-2.2.4-3/sysdeps/i386/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/i386/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/i386/dl-machine.h	Mon Oct 22 12:22:09 2001
@@ -379,7 +379,8 @@ elf_machine_rel (struct link_map *map, c
 }
 
 static inline void
-elf_machine_rel_relative (Elf32_Addr l_addr, const Elf32_Rel *reloc,
+elf_machine_rel_relative (struct link_map *map, Elf32_Addr l_addr,
+			  const Elf32_Rel *reloc,
 			  Elf32_Addr *const reloc_addr)
 {
   assert (ELF32_R_TYPE (reloc->r_info) == R_386_RELATIVE);
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/ia64/dl-machine.h glibc-2.2.4-3/sysdeps/ia64/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/ia64/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/ia64/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -580,7 +580,8 @@ elf_machine_rela (struct link_map *map,
 }
 
 static inline void
-elf_machine_rela_relative (Elf64_Addr l_addr, const Elf64_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf64_Addr l_addr,
+			   const Elf64_Rela *reloc,
 			   Elf64_Addr *const reloc_addr)
 {
   /* ??? Ignore MSB and Instruction format for now.  */
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/m68k/dl-machine.h glibc-2.2.4-3/sysdeps/m68k/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/m68k/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/m68k/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -299,7 +299,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf32_Addr l_addr, const Elf32_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf32_Addr l_addr,
+			   const Elf32_Rela *reloc,
 			   Elf32_Addr *const reloc_addr)
 {
   *reloc_addr = l_addr + reloc->r_addend;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/mips/dl-machine.h glibc-2.2.4-3/sysdeps/mips/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/mips/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/mips/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -535,7 +535,8 @@ elf_machine_rel (struct link_map *map, c
 }
 
 static inline void
-elf_machine_rel_relative (ElfW(Addr) l_addr, const ElfW(Rel) *reloc,
+elf_machine_rel_relative (struct link_map *map, ElfW(Addr) l_addr,
+			  const ElfW(Rel) *reloc,
 			  ElfW(Addr) *const reloc_addr)
 {
   /* XXX Nothing to do.  There is no relative relocation, right?  */
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/mips/mips64/dl-machine.h glibc-2.2.4-3/sysdeps/mips/mips64/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/mips/mips64/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/mips/mips64/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -576,7 +576,8 @@ elf_machine_rel (struct link_map *map, c
 }
 
 static inline void
-elf_machine_rel_relative (ElfW(Addr) l_addr, const ElfW(Rel) *reloc,
+elf_machine_rel_relative (struct link_map *map, ElfW(Addr) l_addr,
+			  const ElfW(Rel) *reloc,
 			  ElfW(Addr) *const reloc_addr)
 {
   /* XXX Nothing to do.  There is no relative relocation, right?  */
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/powerpc/dl-machine.h glibc-2.2.4-3/sysdeps/powerpc/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/powerpc/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/powerpc/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -394,7 +394,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf32_Addr l_addr, const Elf32_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf32_Addr l_addr,
+			   const Elf32_Rela *reloc,
 			   Elf32_Addr *const reloc_addr)
 {
   *reloc_addr = l_addr + reloc->r_addend;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/s390/s390-32/dl-machine.h glibc-2.2.4-3/sysdeps/s390/s390-32/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/s390/s390-32/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/s390/s390-32/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -440,7 +440,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf32_Addr l_addr, const Elf32_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf32_Addr l_addr,
+			   const Elf32_Rela *reloc,
 			   Elf32_Addr *const reloc_addr)
 {
   *reloc_addr = l_addr + reloc->r_addend;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/s390/s390-64/dl-machine.h glibc-2.2.4-3/sysdeps/s390/s390-64/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/s390/s390-64/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/s390/s390-64/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -420,7 +420,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf64_Addr l_addr, const Elf64_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf64_Addr l_addr,
+			   const Elf64_Rela *reloc,
 			   Elf64_Addr *const reloc_addr)
 {
   *reloc_addr = l_addr + reloc->r_addend;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/sh/dl-machine.h glibc-2.2.4-3/sysdeps/sh/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/sh/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/sh/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -558,7 +558,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf32_Addr l_addr, const Elf32_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf32_Addr l_addr,
+			   const Elf32_Rela *reloc,
 			   Elf32_Addr *const reloc_addr)
 {
   Elf32_Addr value;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/sparc/sparc32/dl-machine.h glibc-2.2.4-3/sysdeps/sparc/sparc32/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/sparc/sparc32/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/sparc/sparc32/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -461,7 +461,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf32_Addr l_addr, const Elf32_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf32_Addr l_addr,
+			   const Elf32_Rela *reloc,
 			   Elf32_Addr *const reloc_addr)
 {
   *reloc_addr += l_addr + reloc->r_addend;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/sparc/sparc64/dl-machine.h glibc-2.2.4-3/sysdeps/sparc/sparc64/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/sparc/sparc64/dl-machine.h	Mon Oct 22 14:15:49 2001
+++ glibc-2.2.4-3/sysdeps/sparc/sparc64/dl-machine.h	Mon Oct 22 12:18:30 2001
@@ -370,7 +370,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf64_Addr l_addr, const Elf64_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf64_Addr l_addr,
+			   const Elf64_Rela *reloc,
 			   Elf64_Addr *const reloc_addr)
 {
   *reloc_addr = l_addr + reloc->r_addend;
diff -urpN -x*~ -xTAGS -xdebian glibc-2.2.4-3.orig/sysdeps/x86_64/dl-machine.h glibc-2.2.4-3/sysdeps/x86_64/dl-machine.h
--- glibc-2.2.4-3.orig/sysdeps/x86_64/dl-machine.h	Mon Oct 22 14:15:50 2001
+++ glibc-2.2.4-3/sysdeps/x86_64/dl-machine.h	Mon Oct 22 12:22:09 2001
@@ -393,7 +393,8 @@ elf_machine_rela (struct link_map *map, 
 }
 
 static inline void
-elf_machine_rela_relative (Elf64_Addr l_addr, const Elf64_Rela *reloc,
+elf_machine_rela_relative (struct link_map *map, Elf64_Addr l_addr,
+			   const Elf64_Rela *reloc,
 			   Elf64_Addr *const reloc_addr)
 {
   assert (ELF64_R_TYPE (reloc->r_info) == R_X86_64_RELATIVE);

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Carlos O'Donell Jr.]

A,

Re: Latest glibc changes being applied to what tree?

Are we to assume that the glibc in pehc is now being kept up to date?
Or have these changes made it to the pool on debian? (via hppa's dpatch).

c.

Re: [parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Alan Modra]

On Mon, Oct 22, 2001 at 12:04:05PM -0400, Carlos O'Donell Jr. wrote:
> A,
> 
> Re: Latest glibc changes being applied to what tree?

debian glibc-2.2.4-3, with willy's glibc22-hppa.dpatch

> Are we to assume that the glibc in pehc is now being kept up to date?

No.

> Or have these changes made it to the pool on debian? (via hppa's dpatch).

Not yet, but they should soon

[parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Ben Collins]

On Mon, Oct 22, 2001 at 11:35:34PM +0930, Alan Modra wrote:
> On Sat, Oct 20, 2001 at 05:09:07PM +0930, Alan Modra wrote:
> > 	* sysdeps/hppa/dl-machine.h (elf_machine_dynamic):  Make it a
> > 	const function.  Do not use &_DYNAMIC as .got entries for global
> > 	syms are no longer initialised.  Instead they rely on the reloc,
> > 	which hasn't yet been applied.
> > 	(elf_machine_load_address): Make it const.  Call
> > 	elf_machine_dynamic as that function is called fropm rtld anyway.
> 
> The following, which includes the above patch, should allow glibc to
> once again work on hppa-linux with current binutils.  A number of other
> horrible things fixed:

Excellent. This fixes the ld.so problem. I can only assume that the 235
test suite failures are due to the one missing patch from the current
Debian binutils package.

Randolph, any estimate on when that fixed package will be available?

-- 
 .----------=======-=-======-=========-----------=====------------=-=-----.
/                   Ben Collins    --    Debian GNU/Linux                  \
`  bcollins@debian.org  --  bcollins@openldap.org  --  bcollins@linux.com  '
 `---=========------=======-------------=-=-----=-===-======-------=--=---'

[parisc-linux] Re: Fix for hppa-linux ld.so with newer binutils

[Randolph Chung]

> Excellent. This fixes the ld.so problem. I can only assume that the 235
> test suite failures are due to the one missing patch from the current
> Debian binutils package.
> 
> Randolph, any estimate on when that fixed package will be available?

Alan is debugging this as I write this. Will send the patch to Chris as
soon as we get something that works.

randolph
-- 
Debian Developer <tausq@debian.org>
http://www.TauSq.org/