[parisc-linux] StiFB-Problems

[parisc-linux] StiFB-Problems

[Rüdiger Scholz]

[-- Attachment #1: Type: text/plain, Size: 1035 bytes --]

Hi there,

I have a question concerning the StiFB. I have  715/100 with two 
graphics cards, a built-in one and a HCRX-24 (listed by the kernel as 
Coral SGC). How can I change the device of the StiFB?
I tried sti=0 and sti=1 as boot parameter, but nothing happens. The 
console always opens on the fb0-device (the HCRX-24). I also tried 
video=map:x , which caused a crash right after palo loaded the kernel.
But I can use the built-in card with XFree86. If I add the line  
"fbdevice" "/dev/fb1" to XF86Config, then XFree starts on the built-in card.
Can somebody help me ? The Resolution of the HCRX (1280x1024) is a 
little bit to high for my 17"-Monitor (The font is so small...)

Another problem : Using mpg321 from the 0.9.3 release gives me  the 
failure "Illegal instruction". Glibc-Version is 2.2.4-7. The stack dump 
is in the attached boot.log-file.

And a last question (a little OT): I want to buy a CD-ROM for my box. 
Which one fits the bay with the panel? I tried a Plextor TS-40, but it 
was a bit to large.

Rüdiger

[-- Attachment #2: boot.log --]
[-- Type: text/plain, Size: 8191 bytes --]

Linux version 2.4.16-pa20 (ruediger@gandalf) (gcc version 3.0.2 (Debian)) #1 Sun Dec 16 14:09:47 CET 2001
FP[0] enabled: Rev 1 Model 13
The 32-bit Kernel has started...
Determining PDC firmware type: Snake.
model 000060b0 00000481 00000000 00000000 77b661a7 00000000 00000004 00000072 00000072
vers  0000000b
model 9000/715
Total Memory: 128 Mb
pagetable_init
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda4 HOME=/ console=tty0 sti=0 sti_font=VGA8x16 TERM=linux
Console: colour dummy device 160x64
Calibrating delay loop... 99.73 BogoMIPS
Memory: 126152k available
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Searching for devices...
Found devices:
1. Coral SGC Graphics (10) at 0xf4000000 [0], versions 0x4, 0x0, 0x77
2. Mirage GSC Builtin Graphics (10) at 0xf8000000 [1], versions 0x13, 0x0, 0x85
3. Mirage Core BA (11) at 0xf0100000 [2], versions 0x29, 0x0, 0x81
4. Mirage Core SCSI (10) at 0xf0106000 [2/0/1], versions 0x29, 0x0, 0x82
5. Mirage Core LAN (802.3) (10) at 0xf0107000 [2/0/2], versions 0x29, 0x0, 0x8a
6. Mirage Core RS-232 (10) at 0xf0105000 [2/0/4], versions 0x29, 0x0, 0x8c
7. Mirage Core Centronics (10) at 0xf0102000 [2/0/6], versions 0x29, 0x0, 0x74
8. Mirage Audio (10) at 0xf0104000 [2/0/8], versions 0x29, 0x0, 0x7b
9. Mirage Core PC Floppy (10) at 0xf010a000 [2/0/10], versions 0x29, 0x0, 0x83
10. Mirage Core PS/2 Port (10) at 0xf0108000 [2/0/11], versions 0x29, 0x0, 0x84
11. Mirage Core PS/2 Port (10) at 0xf0108100 [2/0/12], versions 0x29, 0x0, 0x84
12. Mirage Wax BA (11) at 0xf0200000 [5], versions 0x13, 0x0, 0x8e
13. Mirage 100 Wax HIL (10) at 0xf0201000 [5/0/1], versions 0x13, 0x0, 0x73
14. Mirage Wax RS-232 (10) at 0xf0202000 [5/0/2], versions 0x13, 0x0, 0x8c
15. Mirage 100 (0) at 0xfffbe000 [8], versions 0x60b, 0x0, 0x4
16. Mirage 100 (1) at 0xfffbf000 [9], versions 0x4b, 0x0, 0x9
CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz
Lasi version 0 at 0xf0100000 found.
LED display at f00e0000 registered
Wax at 0xf0200000 found.
Wax: HIL Keyboard-NMI registered.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Enabled gecko-style soft power switch.
Starting kswapd
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xf0102800, irq 88 [PCSPP,TRISTATE]
Trying STI ROM at f4000000, hpa at f4000000
STI byte mode ROM at f4000000, hpa=f4000000
selected 8x16 fb-font VGA8x16
STI byte mode ROM, id 2bcb015a-9a02587, conforms to spec rev. 8.04
 supports 3 monitors
 font start 00003f74
 region list 00003f58
 init_graph 000000d8
 alternate code type 0
region #0: phys f4000000, virt f4000000, len=768kB, btlb=1, sysonly=0, cache=0, last=0
region #1: phys f5000000, virt f5000000, len=16384kB, btlb=1, sysonly=0, cache=0, last=0
region #2: phys f4100000, virt f4100000, len=2560kB, btlb=1, sysonly=0, cache=0, last=0
region #3: phys f40c0000, virt f40c0000, len=256kB, btlb=1, sysonly=0, cache=0, last=0
region #4: phys f4c00000, virt f4c00000, len=4096kB, btlb=1, sysonly=0, cache=0, last=0
region #5: phys f4380000, virt f4380000, len=4kB, btlb=0, sysonly=1, cache=0, last=1
3 text planes
1280 x 1024 screen resolution
   0 x    0 offscreen
2048 x 1024 layout
regions at f4000000 f5000000 f4100000 f40c0000
regions at f4c00000 f4380000 00000000 00000000
reent_lvl 0
save_addr 0006a400
monitor 3
in friendly mode: 0
power consumption 0 watts
freq ref 0
sti_mem_addr 005ef460 (size=256 bytes)
8 bits per pixel
8 used bits
24 planes
attributes 00003836
STI device: HPA4071A
Trying STI ROM at f8000000, hpa at f8000000
Trying STI ROM at f0024000, hpa at f8000000
STI word mode ROM at f0024000, hpa=f8000000
STI word mode ROM, id 2b4ded6d-40a00499, conforms to spec rev. 8.04
 supports 13 monitors
 font start 000037d4
 region list 000037c0
 init_graph 00000808
 alternate code type 0
region #0: phys f0024000, virt f0024000, len=24kB, btlb=1, sysonly=0, cache=0, last=0
region #1: phys f9000000, virt f9000000, len=16384kB, btlb=1, sysonly=0, cache=0, last=0
region #2: phys f8100000, virt f8100000, len=2560kB, btlb=1, sysonly=0, cache=0, last=0
region #3: phys f8380000, virt f8380000, len=4kB, btlb=0, sysonly=1, cache=0, last=1
3 text planes
1024 x  768 screen resolution
   0 x    0 offscreen
2048 x 1024 layout
regions at f0024000 f9000000 f8100000 f8380000
regions at 00000000 00000000 00000000 00000000
reent_lvl 0
save_addr 0006a800
monitor 9
in friendly mode: 0
power consumption 0 watts
freq ref 0
sti_mem_addr 005ef660 (size=256 bytes)
8 bits per pixel
8 used bits
8 planes
attributes 00001836
STI device: HPA208LC1024
Console: switching to colour frame buffer device 160x64
fb0: stifb 1280x1024-32 frame buffer device, id: 2bcb015a, mmio: 0xf4100000
fb1: stifb 1024x768-8 frame buffer device, id: 2b4ded6d, mmio: 0xf8100000
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at iomem 0xf0105800 (irq = 90) is a 16550A
ttyS01 at iomem 0xf0202800 (irq = 121) is a 16550A
PS/2 keyboard port at 0xf0108000 (irq 69) found, device attached.
PS/2 psaux port at 0xf0108100 (irq 69) found, device attached.
Found HIL at 0xf0201000, IRQ 126
HIL: no keyboard present.
Warning : device (10, 0x13, 0x0, 0x73) NOT claimed by HIL
lp0: using parport0 (interrupt-driven).
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Found i82596 at 0xf0107000, IRQ 87
eth0: 82596 at 0xf0107000, 08 00 09 7A DC 08 IRQ 87.
82596.c $Revision: 1.27 $
SCSI subsystem driver Revision: 1.00
53c700: Version 2.6 By James.Bottomley@HansenPartnership.com
scsi0: 53c710 rev 2 
scsi0 : LASI SCSI 53c700
scsi0: (6:0) Synchronous at offset 8, period 100ns
  Vendor: SEAGATE   Model: ST32430N          Rev: HP04
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
scsi0: (6:0) Enabling Tag Command Queuing
SCSI device sda: 4194685 512-byte hdwr sectors (2148 MB)
Partition check:
 sda: sda1 sda2 sda3 sda4
Lasi Harmony Audio rev. 18 at 0xf0104000, using IRQ 82
sticonsole_init: searching for STI ROMs
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     : 17177.600 MB/sec
   8regs_prefetch:    70.800 MB/sec
   32regs    :   118.400 MB/sec
   32regs_prefetch:   119.200 MB/sec
raid5: using function: 8regs (17177.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
NOT FREEING INITMEM
Adding Swap: 132920k swap-space (priority -1)
eth0: link ok.
Warning: Remapping obsolete /dev/fb* minor 32 to 1
mpg321 (pid 219): Privileged operation (code 10)

     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001101111111000001111 Not tainted
r00-03  00000000 40028cc0 4000b947 00000081
r04-07  4026e3a4 402855d0 40257e84 0002fd90
r08-11  4025163c 40028544 faf03cc8 40257e84
r12-15  4024e000 00000080 4024f1dc 40253a30
r16-19  40028544 0000000c 00000000 40028544
r20-23  0000001b 00036b10 00000000 4024e000
r24-27  40284b10 00000081 40256e58 00027e50
r28-31  00000081 00000041 faf03e00 4000933f
sr0-3   00000018 00000018 00000000 00000018
sr4-7   00000018 00000018 00000018 00000018
IASQ: 00000018 00000018 IAOQ: 4000b66b 4000b66f
 IIR: 04000000    ISR: 00000018  IOR: 00000000
 CPU:        0   CR30: 16b40000 CR31: 10360000
 ORIG_R28: 00000000

Re: [parisc-linux] StiFB-Problems [off]

[diab]

> And a last question (a little OT): I want to buy a CD-ROM for my box.
> Which one fits the bay with the panel? I tried a Plextor TS-40, but it
> was a bit to large.
I was able to fit my 32x plextor "into" the same 715/100.
Had some trouble with the power connector, but it can be worked out. Try to
pull it out a bit
so it can be bent towards the right direction.
You might try to remove the metal "case" that holds the cd, put it in there
and screw
the metal case back w/ the cd-rom in it. I might be wrong about the exact
method because it was like 3-4 months ago, but the 32x plextor is still in
the 715/100 (and is working perfectly:)
good luck w/ the hw wrestling :)
-
diab

Re: [parisc-linux] StiFB-Problems

[Richard Hirst]

On Sun, Dec 16, 2001 at 09:34:45PM +0100, Rüdiger Scholz wrote:
> Another problem : Using mpg321 from the 0.9.3 release gives me  the 
> failure "Illegal instruction". Glibc-Version is 2.2.4-7. The stack dump 
> is in the attached boot.log-file.

You need a rebuilt libaudiofile0 deb to fix that, should be in the
archive in a day or two, thanks to tausq.

Richard