All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Mayer <james.mayer@acm.org>
To: linux-kernel@vger.kernel.org
Subject: Re: [bug] 2.4.19-pre4-ac2 hang at boot with ALI15x3 chipset support
Date: Thu, 28 Mar 2002 18:08:55 -0700	[thread overview]
Message-ID: <20020329010855.GA871@opus> (raw)
In-Reply-To: <86387368@toto.iv> <m16qQix-0014LaC@malasada.lava.net>

> James> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> James> hda: drive not ready for command
> 
> I ran into this as well under various kernels including 2.4.18.  Try
> adding:
>     append="idebus=50"
> 
> to the lilo stanza for your kernel.
> 
> It seems even after I amputated the offending "write" that causes the
> lockup, the bus speed was being set to 33MHz instead of 50Mhz.  The
> above solved the problem for me.

This worked for me as well -- interesting.

> For anyone else trying to configure the pcg-c1mrx or pcg-c1mv, I'm
> updating linux configuration document as I work through the
> setup of the various devices:
>     http://hale.org/~bhoward/issue_7/pcg-c1mrx.html

Good information there.  Oddly enough, I don't need to specify the
pci=conf2, though.

Thanks to everyone for the speedy assistance!
 - James

  reply	other threads:[~2002-03-29  1:09 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <86387368@toto.iv>
2002-03-28  3:37 ` [bug] 2.4.19-pre4-ac2 hang at boot with ALI15x3 chipset support bhoward
2002-03-29  1:08   ` James Mayer [this message]
     [not found] <124088188@toto.iv>
2002-03-29 10:01 ` bhoward
2002-03-27 23:38 James Mayer
2002-03-27 23:52 ` Brian D Heaton
2002-03-27 23:59 ` Andre Hedrick
2002-03-28  0:04 ` Alan Cox
2002-03-28  0:21   ` James Mayer
2002-03-28  0:30     ` Andre Hedrick

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20020329010855.GA871@opus \
    --to=james.mayer@acm.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.