kbd not functioning in 2.5.25-dj2

kbd not functioning in 2.5.25-dj2

[Ed Sweetman]

Same config as in my last post about the issue linking with this
kernel.  I'm having my keyboard just not respond from boot.  I've got
Input Device support built in and i had it as module and the keyboard is
ps/2.  No idea what's going on here 

Re: kbd not functioning in 2.5.25-dj2

[A Guy Called Tyketto]

On Sat, Jul 13, 2002 at 03:24:09AM -0400, Ed Sweetman wrote:
> Same config as in my last post about the issue linking with this
> kernel.  I'm having my keyboard just not respond from boot.  I've got
> Input Device support built in and i had it as module and the keyboard is
> ps/2.  No idea what's going on here 
> 

        Just a "me too" here.. I've had this problem since around 2.5.15-dj 
and later, and have had input and keyboard support compiled into the kernel. 
Luckily I was able to get into the box via ssh, and check things. both 
keyboard and mouse are PS/2. If possible, see if you can do this, and check if 
IRQ 1 is not listed in /proc/interrupts. That is what is happening with me, 
while my mouse is working. For me to get my keyboard to work, I have to have 
the following set:

CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y

        This leaves me without using the new Input API, but with a working 
keyboard. with using the new API, mouse will work, keyboard will not. you can 
try these, and use the old setup (I assume will be made legacy by the time 2.6 
comes out), and let me know if they work. The new API seems to be working for 
some people, but not all.

                                                        BL.
-- 
Brad Littlejohn                         | Email:        tyketto@wizard.com
Unix Systems Administrator,             |           tyketto@ozemail.com.au
Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
  PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF

Re: kbd not functioning in 2.5.25-dj2

[Ed Sweetman]

2.5.18 is the last time it worked for me I have basically the same exact
config, the new input system seems to have undergone some changes since
then though and now it's not behaving.  I will try setting the XTKBD
setting and PS2SEDKBD or whatever it is.  


On Sat, 2002-07-13 at 03:37, A Guy Called Tyketto wrote:
> On Sat, Jul 13, 2002 at 03:24:09AM -0400, Ed Sweetman wrote:
> > Same config as in my last post about the issue linking with this
> > kernel.  I'm having my keyboard just not respond from boot.  I've got
> > Input Device support built in and i had it as module and the keyboard is
> > ps/2.  No idea what's going on here 
> > 
> 
>         Just a "me too" here.. I've had this problem since around 2.5.15-dj 
> and later, and have had input and keyboard support compiled into the kernel. 
> Luckily I was able to get into the box via ssh, and check things. both 
> keyboard and mouse are PS/2. If possible, see if you can do this, and check if 
> IRQ 1 is not listed in /proc/interrupts. That is what is happening with me, 
> while my mouse is working. For me to get my keyboard to work, I have to have 
> the following set:
> 
> CONFIG_INPUT=y
> CONFIG_INPUT_KEYBDEV=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_EVDEV=y
> CONFIG_INPUT_EVBUG=y
> CONFIG_SERIO=y
> CONFIG_SERIO_SERPORT=m
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> CONFIG_KEYBOARD_XTKBD=y
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> 
>         This leaves me without using the new Input API, but with a working 
> keyboard. with using the new API, mouse will work, keyboard will not. you can 
> try these, and use the old setup (I assume will be made legacy by the time 2.6 
> comes out), and let me know if they work. The new API seems to be working for 
> some people, but not all.
> 
>                                                         BL.
> -- 
> Brad Littlejohn                         | Email:        tyketto@wizard.com
> Unix Systems Administrator,             |           tyketto@ozemail.com.au
> Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
>   PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: kbd not functioning in 2.5.25-dj2

[Ed Sweetman]

[-- Attachment #1: Type: text/plain, Size: 3021 bytes --]

Nope, failure.  I'm not getting any reaction from the kernel at all
about the keyboard.  I'm including my config 


On Sat, 2002-07-13 at 04:01, Ed Sweetman wrote:
> 2.5.18 is the last time it worked for me I have basically the same exact
> config, the new input system seems to have undergone some changes since
> then though and now it's not behaving.  I will try setting the XTKBD
> setting and PS2SEDKBD or whatever it is.  
> 
> 
> On Sat, 2002-07-13 at 03:37, A Guy Called Tyketto wrote:
> > On Sat, Jul 13, 2002 at 03:24:09AM -0400, Ed Sweetman wrote:
> > > Same config as in my last post about the issue linking with this
> > > kernel.  I'm having my keyboard just not respond from boot.  I've got
> > > Input Device support built in and i had it as module and the keyboard is
> > > ps/2.  No idea what's going on here 
> > > 
> > 
> >         Just a "me too" here.. I've had this problem since around 2.5.15-dj 
> > and later, and have had input and keyboard support compiled into the kernel. 
> > Luckily I was able to get into the box via ssh, and check things. both 
> > keyboard and mouse are PS/2. If possible, see if you can do this, and check if 
> > IRQ 1 is not listed in /proc/interrupts. That is what is happening with me, 
> > while my mouse is working. For me to get my keyboard to work, I have to have 
> > the following set:
> > 
> > CONFIG_INPUT=y
> > CONFIG_INPUT_KEYBDEV=y
> > CONFIG_INPUT_MOUSEDEV=y
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > CONFIG_INPUT_EVDEV=y
> > CONFIG_INPUT_EVBUG=y
> > CONFIG_SERIO=y
> > CONFIG_SERIO_SERPORT=m
> > CONFIG_INPUT_KEYBOARD=y
> > CONFIG_KEYBOARD_ATKBD=y
> > CONFIG_KEYBOARD_XTKBD=y
> > CONFIG_INPUT_MOUSE=y
> > CONFIG_MOUSE_PS2=y
> > 
> >         This leaves me without using the new Input API, but with a working 
> > keyboard. with using the new API, mouse will work, keyboard will not. you can 
> > try these, and use the old setup (I assume will be made legacy by the time 2.6 
> > comes out), and let me know if they work. The new API seems to be working for 
> > some people, but not all.
> > 
> >                                                         BL.
> > -- 
> > Brad Littlejohn                         | Email:        tyketto@wizard.com
> > Unix Systems Administrator,             |           tyketto@ozemail.com.au
> > Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
> >   PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF
> > 
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/


[-- Attachment #2: config2 --]
[-- Type: text/plain, Size: 24626 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_CPU_FREQ is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#

#
# ACPI Support
#
# CONFIG_ACPI is not set
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_IKCONFIG is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set

#
#  
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
# CONFIG_IDE_24 is not set
CONFIG_IDE_25=y

#
# ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m

#
# ATA host chip set support
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set

#
#   PCI host chip set support
#
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDE_TCQ_DEFAULT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC6280_BURST is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_IVB is not set
CONFIG_ATAPI=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set

#
# SCSI support
#
CONFIG_SCSI=m

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BROKEN_SCSI_ERROR_HANDLING is not set
CONFIG_BLK_DEV_SD=m
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SM is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_NEW_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461X is not set
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_I8042_REG_BASE=60
CONFIG_I8042_KBD_IRQ=1
CONFIG_I8042_AUX_IRQ=12
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_PS2SERKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE_USB is not set
# CONFIG_JOYSTICK_IFORCE_232 is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not set
CONFIG_INTEL_RNG=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_I810 is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_EXPORTFS is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
# CONFIG_FB is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DEBUG_MEMORY is not set
# CONFIG_SND_DEBUG_DETECT is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA686 is not set
# CONFIG_SND_VIA8233 is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_LONG_TIMEOUT=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD_ALT=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
#   Video4Linux support is needed for USB Multimedia device support
#
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_OBSOLETE is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_486_STRING is not set
# CONFIG_FRAME_POINTER is not set

#
# Library routines
#
CONFIG_CRC32=y
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

Hi!

Okay, I wrote all these input drivers. So I'd like to see them working.  ;)

All you should need for proper function of both keyboard and mouse on a
all-input-driver based system (like -dj kernels, or linux-input BK tree
are) is:

CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_I8042_REG_BASE=60
CONFIG_I8042_KBD_IRQ=1
CONFIG_I8042_AUX_IRQ=12
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y

So I guess your problem is not enabling the i8042 module.

This code will also hopefully be enabled in 2.5.26 (though it'll be optional
with the old driver still there).

On Sat, Jul 13, 2002 at 04:45:56AM -0400, Ed Sweetman wrote:
> Nope, failure.  I'm not getting any reaction from the kernel at all
> about the keyboard.  I'm including my config 
> 
> 
> On Sat, 2002-07-13 at 04:01, Ed Sweetman wrote:
> > 2.5.18 is the last time it worked for me I have basically the same exact
> > config, the new input system seems to have undergone some changes since
> > then though and now it's not behaving.  I will try setting the XTKBD
> > setting and PS2SEDKBD or whatever it is.  
> > 
> > 
> > On Sat, 2002-07-13 at 03:37, A Guy Called Tyketto wrote:
> > > On Sat, Jul 13, 2002 at 03:24:09AM -0400, Ed Sweetman wrote:
> > > > Same config as in my last post about the issue linking with this
> > > > kernel.  I'm having my keyboard just not respond from boot.  I've got
> > > > Input Device support built in and i had it as module and the keyboard is
> > > > ps/2.  No idea what's going on here 
> > > > 
> > > 
> > >         Just a "me too" here.. I've had this problem since around 2.5.15-dj 
> > > and later, and have had input and keyboard support compiled into the kernel. 
> > > Luckily I was able to get into the box via ssh, and check things. both 
> > > keyboard and mouse are PS/2. If possible, see if you can do this, and check if 
> > > IRQ 1 is not listed in /proc/interrupts. That is what is happening with me, 
> > > while my mouse is working. For me to get my keyboard to work, I have to have 
> > > the following set:
> > > 
> > > CONFIG_INPUT=y
> > > CONFIG_INPUT_KEYBDEV=y
> > > CONFIG_INPUT_MOUSEDEV=y
> > > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > > CONFIG_INPUT_EVDEV=y
> > > CONFIG_INPUT_EVBUG=y
> > > CONFIG_SERIO=y
> > > CONFIG_SERIO_SERPORT=m
> > > CONFIG_INPUT_KEYBOARD=y
> > > CONFIG_KEYBOARD_ATKBD=y
> > > CONFIG_KEYBOARD_XTKBD=y
> > > CONFIG_INPUT_MOUSE=y
> > > CONFIG_MOUSE_PS2=y
> > > 
> > >         This leaves me without using the new Input API, but with a working 
> > > keyboard. with using the new API, mouse will work, keyboard will not. you can 
> > > try these, and use the old setup (I assume will be made legacy by the time 2.6 
> > > comes out), and let me know if they work. The new API seems to be working for 
> > > some people, but not all.
> > > 
> > >                                                         BL.
> > > -- 
> > > Brad Littlejohn                         | Email:        tyketto@wizard.com
> > > Unix Systems Administrator,             |           tyketto@ozemail.com.au
> > > Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
> > >   PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF
> > > 
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at  http://www.tux.org/lkml/
> > 
> > 
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> 

> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> # CONFIG_SBUS is not set
> CONFIG_UID16=y
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> 
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> 
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> # CONFIG_MODVERSIONS is not set
> CONFIG_KMOD=y
> 
> #
> # Processor type and features
> #
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMIII is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> # CONFIG_SMP is not set
> CONFIG_PREEMPT=y
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_MCE=y
> # CONFIG_X86_MCE_NONFATAL is not set
> CONFIG_X86_MCE_P4THERMAL=y
> # CONFIG_CPU_FREQ is not set
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=m
> CONFIG_X86_CPUID=m
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_HAVE_DEC_LOCK=y
> 
> #
> # Power management options (ACPI, APM)
> #
> 
> #
> # ACPI Support
> #
> # CONFIG_ACPI is not set
> # CONFIG_PM is not set
> # CONFIG_APM is not set
> # CONFIG_SOFTWARE_SUSPEND is not set
> 
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_NAMES=y
> # CONFIG_ISA is not set
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> CONFIG_HOTPLUG=y
> 
> #
> # PCMCIA/CardBus support
> #
> # CONFIG_PCMCIA is not set
> 
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
> # CONFIG_HOTPLUG_PCI_COMPAQ is not set
> # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
> # CONFIG_HOTPLUG_PCI_IBM is not set
> 
> #
> # Executable file formats
> #
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=m
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=m
> # CONFIG_IKCONFIG is not set
> 
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> 
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
> 
> #
> # Plug and Play configuration
> #
> # CONFIG_PNP is not set
> # CONFIG_ISAPNP is not set
> # CONFIG_PNPBIOS is not set
> 
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_CISS_SCSI_TAPE is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=m
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_BLK_DEV_INITRD is not set
> 
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> # CONFIG_BLK_DEV_MD is not set
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID5 is not set
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_BLK_DEV_LVM is not set
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> # CONFIG_NETLINK_DEV is not set
> # CONFIG_NETFILTER is not set
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_IPV6 is not set
> # CONFIG_KHTTPD is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> 
> #
> #  
> #
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> 
> #
> # Appletalk devices
> #
> # CONFIG_DEV_APPLETALK is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_LLC is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
> 
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> 
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> # CONFIG_PHONE_IXJ is not set
> # CONFIG_PHONE_IXJ_PCMCIA is not set
> 
> #
> # ATA/IDE/MFM/RLL support
> #
> CONFIG_IDE=y
> # CONFIG_IDE_24 is not set
> CONFIG_IDE_25=y
> 
> #
> # ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
> 
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_IDEDISK_STROKE=y
> # CONFIG_BLK_DEV_IDECS is not set
> CONFIG_BLK_DEV_IDECD=m
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> CONFIG_BLK_DEV_IDESCSI=m
> 
> #
> # ATA host chip set support
> #
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> # CONFIG_BLK_DEV_ISAPNP is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> 
> #
> #   PCI host chip set support
> #
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_BLK_DEV_IDE_TCQ is not set
> # CONFIG_BLK_DEV_IDE_TCQ_DEFAULT is not set
> # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_AEC6280_BURST is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_WDC_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_HPT34X_AUTODMA is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_PDC202XX is not set
> # CONFIG_PDC202XX_BURST is not set
> # CONFIG_PDC202XX_FORCE is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_BLK_DEV_SL82C105 is not set
> # CONFIG_IDE_CHIPSETS is not set
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_ATAPI=y
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_ATARAID is not set
> # CONFIG_BLK_DEV_ATARAID_PDC is not set
> # CONFIG_BLK_DEV_ATARAID_HPT is not set
> 
> #
> # SCSI support
> #
> CONFIG_SCSI=m
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> # CONFIG_BROKEN_SCSI_ERROR_HANDLING is not set
> CONFIG_BLK_DEV_SD=m
> CONFIG_SD_EXTRA_DEVS=40
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=m
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_SR_EXTRA_DEVS=2
> CONFIG_CHR_DEV_SG=m
> # CONFIG_CHR_DEV_SM is not set
> 
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_REPORT_LUNS=y
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> 
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_DMA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_NCR53C7xx is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_NCR53C8XX is not set
> # CONFIG_SCSI_SYM53C8XX is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_DEBUG is not set
> 
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> # CONFIG_FUSION_BOOT is not set
> # CONFIG_FUSION_ISENSE is not set
> # CONFIG_FUSION_CTL is not set
> # CONFIG_FUSION_LAN is not set
> 
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
> 
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
> # CONFIG_I2O_PCI is not set
> # CONFIG_I2O_BLOCK is not set
> # CONFIG_I2O_LAN is not set
> # CONFIG_I2O_SCSI is not set
> # CONFIG_I2O_PROC is not set
> 
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> 
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_SUNLANCE is not set
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNBMAC is not set
> # CONFIG_SUNQE is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_APRICOT is not set
> # CONFIG_CS89x0 is not set
> # CONFIG_DGRS is not set
> CONFIG_EEPRO100=m
> CONFIG_E100=m
> # CONFIG_LNE390 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_NE3210 is not set
> # CONFIG_ES3210 is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> # CONFIG_8139TOO_8129 is not set
> # CONFIG_8139_NEW_RX_RESET is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_VIA_RHINE_MMIO is not set
> # CONFIG_NET_POCKET is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_MYRI_SBUS is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> 
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> 
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> 
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> 
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
> 
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
> 
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_KEYBDEV=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> # CONFIG_GAMEPORT_NS558 is not set
> # CONFIG_GAMEPORT_L4 is not set
> # CONFIG_GAMEPORT_EMU10K1 is not set
> # CONFIG_GAMEPORT_VORTEX is not set
> # CONFIG_GAMEPORT_FM801 is not set
> # CONFIG_GAMEPORT_CS461X is not set
> CONFIG_SERIO=y
> # CONFIG_SERIO_I8042 is not set
> CONFIG_I8042_REG_BASE=60
> CONFIG_I8042_KBD_IRQ=1
> CONFIG_I8042_AUX_IRQ=12
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_PS2SERKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_MOUSE_PS2 is not set
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_INPORT is not set
> # CONFIG_MOUSE_LOGIBM is not set
> # CONFIG_MOUSE_PC110PAD is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_JOYSTICK_ANALOG is not set
> # CONFIG_JOYSTICK_A3D is not set
> # CONFIG_JOYSTICK_ADI is not set
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> # CONFIG_JOYSTICK_GRIP is not set
> # CONFIG_JOYSTICK_GUILLEMOT is not set
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE_USB is not set
> # CONFIG_JOYSTICK_IFORCE_232 is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> # CONFIG_JOYSTICK_TWIDDLER is not set
> # CONFIG_JOYSTICK_DB9 is not set
> # CONFIG_JOYSTICK_GAMECON is not set
> # CONFIG_JOYSTICK_TURBOGRAFX is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_TOUCHSCREEN_GUNZE is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_SERIAL=y
> # CONFIG_SERIAL_CONSOLE is not set
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> 
> #
> # I2C support
> #
> CONFIG_I2C=m
> CONFIG_I2C_ALGOBIT=m
> # CONFIG_I2C_PHILIPSPAR is not set
> # CONFIG_I2C_ELV is not set
> # CONFIG_I2C_VELLEMAN is not set
> # CONFIG_I2C_ALGOPCF is not set
> CONFIG_I2C_CHARDEV=m
> CONFIG_I2C_PROC=m
> # CONFIG_QIC02_TAPE is not set
> 
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_AMD_RNG is not set
> CONFIG_INTEL_RNG=y
> # CONFIG_NVRAM is not set
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_I810 is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_SWORKS is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_GAMMA is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_MWAVE is not set
> 
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> 
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_QFMT_V1 is not set
> # CONFIG_QFMT_V2 is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_ADFS_FS_RW is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BFS_FS is not set
> CONFIG_EXT3_FS=y
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> # CONFIG_UMSDOS_FS is not set
> CONFIG_VFAT_FS=m
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS_FS is not set
> # CONFIG_JFFS2_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_TMPFS is not set
> CONFIG_RAMFS=y
> CONFIG_ISO9660_FS=m
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> # CONFIG_JFS_FS is not set
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> CONFIG_DEVFS_FS=y
> CONFIG_DEVFS_MOUNT=y
> # CONFIG_DEVFS_DEBUG is not set
> # CONFIG_DEVPTS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX4FS_RW is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=m
> # CONFIG_SYSV_FS is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UDF_RW is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_UFS_FS_WRITE is not set
> 
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> # CONFIG_NFS_FS is not set
> # CONFIG_NFS_V3 is not set
> # CONFIG_ROOT_NFS is not set
> # CONFIG_NFSD is not set
> # CONFIG_NFSD_V3 is not set
> # CONFIG_NFSD_TCP is not set
> # CONFIG_SUNRPC is not set
> # CONFIG_LOCKD is not set
> # CONFIG_EXPORTFS is not set
> CONFIG_SMB_FS=y
> # CONFIG_SMB_NLS_DEFAULT is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_NCPFS_PACKET_SIGNING is not set
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> # CONFIG_NCPFS_STRONG is not set
> # CONFIG_NCPFS_NFS_NS is not set
> # CONFIG_NCPFS_OS2_NS is not set
> # CONFIG_NCPFS_SMALLDOS is not set
> # CONFIG_NCPFS_NLS is not set
> # CONFIG_NCPFS_EXTRAS is not set
> # CONFIG_ZISOFS_FS is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
> 
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
> 
> #
> # Console drivers
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VIDEO_SELECT=y
> # CONFIG_MDA_CONSOLE is not set
> 
> #
> # Frame-buffer support
> #
> # CONFIG_FB is not set
> 
> #
> # Sound
> #
> CONFIG_SOUND=m
> 
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
> 
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=m
> # CONFIG_SND_SEQUENCER is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> # CONFIG_SND_SEQUENCER_OSS is not set
> CONFIG_SND_RTCTIMER=m
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> # CONFIG_SND_DEBUG_MEMORY is not set
> # CONFIG_SND_DEBUG_DETECT is not set
> 
> #
> # Generic devices
> #
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> 
> #
> # PCI devices
> #
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_CS46XX is not set
> CONFIG_SND_EMU10K1=m
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_VIA686 is not set
> # CONFIG_SND_VIA8233 is not set
> 
> #
> # USB support
> #
> CONFIG_USB=m
> # CONFIG_USB_DEBUG is not set
> 
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_LONG_TIMEOUT=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> 
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_EHCI_HCD is not set
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD_ALT=m
> 
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH_TTY is not set
> # CONFIG_USB_MIDI is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_HP8200e is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> 
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=m
> CONFIG_USB_HIDINPUT=y
> # CONFIG_USB_HIDDEV is not set
> # CONFIG_USB_KBD is not set
> # CONFIG_USB_MOUSE is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> 
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_SCANNER is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USB_HPUSBSCSI is not set
> 
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
> 
> #
> #   Video4Linux support is needed for USB Multimedia device support
> #
> # CONFIG_USB_VICAM is not set
> # CONFIG_USB_DSBR is not set
> # CONFIG_USB_IBMCAM is not set
> # CONFIG_USB_KONICAWC is not set
> # CONFIG_USB_OV511 is not set
> # CONFIG_USB_PWC is not set
> # CONFIG_USB_SE401 is not set
> # CONFIG_USB_STV680 is not set
> 
> #
> # USB Network adaptors
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_CDCETHER is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> 
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> 
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
> # CONFIG_USB_SERIAL_GENERIC is not set
> # CONFIG_USB_SERIAL_BELKIN is not set
> # CONFIG_USB_SERIAL_WHITEHEAT is not set
> # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
> # CONFIG_USB_SERIAL_EMPEG is not set
> # CONFIG_USB_SERIAL_FTDI_SIO is not set
> # CONFIG_USB_SERIAL_VISOR is not set
> # CONFIG_USB_SERIAL_IPAQ is not set
> # CONFIG_USB_SERIAL_IR is not set
> # CONFIG_USB_SERIAL_EDGEPORT is not set
> # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
> # CONFIG_USB_SERIAL_KEYSPAN is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
> # CONFIG_USB_SERIAL_KLSI is not set
> # CONFIG_USB_SERIAL_MCT_U232 is not set
> # CONFIG_USB_SERIAL_PL2303 is not set
> # CONFIG_USB_SERIAL_SAFE is not set
> # CONFIG_USB_SERIAL_SAFE_PADDED is not set
> # CONFIG_USB_SERIAL_CYBERJACK is not set
> # CONFIG_USB_SERIAL_XIRCOM is not set
> # CONFIG_USB_SERIAL_OMNINET is not set
> 
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_TIGL is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_BRLVGER is not set
> 
> #
> # Bluetooth support
> #
> # CONFIG_BLUEZ is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_OBSOLETE is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_IOVIRT is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_486_STRING is not set
> # CONFIG_FRAME_POINTER is not set
> 
> #
> # Library routines
> #
> CONFIG_CRC32=y
> # CONFIG_ZLIB_INFLATE is not set
> # CONFIG_ZLIB_DEFLATE is not set


-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[A Guy Called Tyketto]

On Sat, Jul 13, 2002 at 11:06:19AM +0200, Vojtech Pavlik wrote:
> Hi!
> 
> Okay, I wrote all these input drivers. So I'd like to see them working.  ;)
> 
> All you should need for proper function of both keyboard and mouse on a
> all-input-driver based system (like -dj kernels, or linux-input BK tree
> are) is:
> 
> CONFIG_INPUT=y
> CONFIG_INPUT_KEYBDEV=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_I8042_REG_BASE=60
> CONFIG_I8042_KBD_IRQ=1
> CONFIG_I8042_AUX_IRQ=12
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> 

        I just gave this a try with 2.5.25-dj2, and I still don't have a 
working keyboard. Mouse works fine; no response from the keyboard. revelant 
parts of .config below:

CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
CONFIG_GAMEPORT_FM801=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_I8042_REG_BASE=60
CONFIG_I8042_KBD_IRQ=1
CONFIG_I8042_AUX_IRQ=12
CONFIG_SERIO_SERPORT=m
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y

        /proc/interrupts shows:

           CPU0       
  0:     108187          XT-PIC  timer
  2:          0          XT-PIC  cascade
  4:        182          XT-PIC  serial
  5:          1          XT-PIC  parport0
  8:          1          XT-PIC  rtc
 10:        530          XT-PIC  eth0
 12:        830          XT-PIC  i8042
 14:       3754          XT-PIC  ide0
 15:          1          XT-PIC  ide1
NMI:          0 
LOC:     108090 
ERR:        124
MIS:          0

        From the above part of .config, IRQ1 should be set for the keyboard, 
while IRQ 12 for the AUX port. 12 is set, 1 is not. dmesg shows:

Linux version 2.5.25-dj2 (root@bellicha) (gcc version 2.95.3 20010315 (release)) #1 Sat Jul 13 14:30:44 PDT 2002
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009fc00 (usable)
 user: 000000000009fc00 - 00000000000a0000 (reserved)
 user: 00000000000f0000 - 0000000000100000 (reserved)
 user: 0000000000100000 - 000000001fff0000 (usable)
 user: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 user: 000000001fff3000 - 0000000020000000 (ACPI data)
 user: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=unix ro root=301 ether=0,0,0,eth0 ether=0,0,0,eth1 mem=512m devfs=mount video=aty128fb:mode:1280x1024,font:SUN12x22
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1133.544 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2228.22 BogoMIPS
Memory: 516620k/524224k available (1183k kernel code, 7216k reserved, 345k data, 244k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Machine check exception polling timer started.
CPU:     After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU:             Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1133.0220 MHz.
..... host bus clock speed is 266.0640 MHz.
cpu: 0, clocks: 266640, slice: 133320
CPU0<T0:266640,T1:133312,D:8,S:133320,C:266640>
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec: init pool 0, 1 entries, 12 bytes
biovec: init pool 1, 4 entries, 48 bytes
biovec: init pool 2, 16 entries, 192 bytes
biovec: init pool 3, 64 entries, 768 bytes
biovec: init pool 4, 128 entries, 1536 bytes
biovec: init pool 5, 256 entries, 3072 bytes
Journalled Block Device driver loaded
devfs: v1.17 (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
aty128fb: Rage128 BIOS located at segment C00C0000
aty128fb: Rage128 Pro TF (AGP) [chip rev 0x4] 32M 128-bit SDR SGRAM (1:1)
Console: switching to colour frame buffer device 80x30
fb0: ATY Rage128 frame buffer device on PCI
aty128fb: Rage128 MTRR set to ON
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.11
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xd0000000 64MB
[drm] Initialized r128 2.2.0 20010917 on minor 0
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xd0000000 64MB
[drm] Initialized radeon 1.3.1 20020611 on minor 1
block: 256 slots per queue, batch=32
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: VIA Technologies, Inc. Bus Master IDE, PCI slot 00:07.1
ATA: chipset rev.: 6
ATA: non-legacy mode: IRQ probe delayed
VP_IDE: VIA vt82c686b (rev 40) ATA UDMA100 controller on PCI 00:07.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 91531U3, DISK drive
hdb: WDC WD200AB-00BVA0, DISK drive
hdc: CD-W54E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
 hda: 30015216 sectors w/512KiB Cache, CHS=29777/16/63, UDMA(66)
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [1868/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 >
 hdb: 39102336 sectors w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
 /dev/ide/host0/bus0/target1/lun0: [PTBL] [2434/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 >
mice: PS/2 mouse device common for all mice
serio: i8042 KBD port at 0x60,0x64 irq 1
input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 244k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding 1028120k swap on /dev/hdb1.  Priority:-1 extents:1
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,67), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,67)) for (ide0(3,67))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,71), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,71)) for (ide0(3,71))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,70), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,70)) for (ide0(3,70))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,7), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,7)) for (ide0(3,7))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,69), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,69)) for (ide0(3,69))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,5), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,5)) for (ide0(3,5))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,66), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,66)) for (ide0(3,66))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,6), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,6)) for (ide0(3,6))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,72), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,72)) for (ide0(3,72))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,73), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,73)) for (ide0(3,73))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,74), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,74)) for (ide0(3,74))
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,8), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,8)) for (ide0(3,8))
Using r5 hash to sort names
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
PCI: Found IRQ 10 for device 00:08.0
eth0: Intel Corp. 82557 [Ethernet Pro 100], 00:90:27:10:08:1C, IRQ 10.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 689661-004, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x24c9f043).
  Receiver lock-up workaround activated.
parport0: PC-style at 0x278, irq 5 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.0 (4095 buckets, 32760 max) - 292 bytes per conntrack
ASSERT ip_conntrack_core.c:544 &ip_conntrack_lock not readlocked
Software Watchdog Timer: 0.06, soft_margin: 60 sec, nowayout: 1

        So I don't really know what is causing my keyboard (PS/2) to not work 
with the new API. I also don't know how others are getting it to work.. any 
insight?

                                                        BL.
-- 
Brad Littlejohn                         | Email:        tyketto@wizard.com
Unix Systems Administrator,             |           tyketto@ozemail.com.au
Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
  PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sat, Jul 13, 2002 at 02:48:01PM -0700, A Guy Called Tyketto wrote:

>         I just gave this a try with 2.5.25-dj2, and I still don't have a 
> working keyboard. Mouse works fine; no response from the keyboard. revelant 
> parts of .config below:
> 
> CONFIG_INPUT=y
> CONFIG_INPUT_KEYBDEV=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_EVDEV=m
> # CONFIG_INPUT_EVBUG is not set
> CONFIG_GAMEPORT=m
> CONFIG_SOUND_GAMEPORT=m
> CONFIG_GAMEPORT_FM801=m
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_I8042_REG_BASE=60
> CONFIG_I8042_KBD_IRQ=1
> CONFIG_I8042_AUX_IRQ=12
> CONFIG_SERIO_SERPORT=m
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y

The .config is OK.

>         /proc/interrupts shows:
> 
>            CPU0       
>   0:     108187          XT-PIC  timer
>   2:          0          XT-PIC  cascade
>   4:        182          XT-PIC  serial
>   5:          1          XT-PIC  parport0
>   8:          1          XT-PIC  rtc
>  10:        530          XT-PIC  eth0
>  12:        830          XT-PIC  i8042
>  14:       3754          XT-PIC  ide0

Unfortunately this doesn't list interrupts, which happened, but are no
longer claimed by any driver - and the i8042 driver frees the interrupt
when it detects no device.

>         From the above part of .config, IRQ1 should be set for the keyboard, 
> while IRQ 12 for the AUX port. 12 is set, 1 is not. dmesg shows:
> 
> mice: PS/2 mouse device common for all mice
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
> serio: i8042 AUX port at 0x60,0x64 irq 12

So it detected both the KBD and AUX ports properly, but for some reason
it couldn't identify the attached keyboard.

Can you #define ATKBD_DEBUG in drivers/input/keyboard/atkbd.c? 
Then you'll see what happened in' dmesg'.

>         So I don't really know what is causing my keyboard (PS/2) to not work 
> with the new API. I also don't know how others are getting it to work.. any 
> insight?

Most likely you have a somewhat unusual keyboard - it may be responding
too slow perhaps, so that the driver times out - or doesn't support some
of the commands the driver expects to use.

Or the mouse kills the keyboard. This also can happen - they share
common resources. This would need more debugging then.

So, what's the keyboard, what's the mouse, and what's the mainboard
exactly? 

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[A Guy Called Tyketto]

On Sun, Jul 14, 2002 at 10:05:09AM +0200, Vojtech Pavlik wrote:
> 
> Unfortunately this doesn't list interrupts, which happened, but are no
> longer claimed by any driver - and the i8042 driver frees the interrupt
> when it detects no device.

        Interesting.. it detects it, as per dmesg below, but then it frees 
it.. really interesting..

> >         From the above part of .config, IRQ1 should be set for the keyboard, 
> > while IRQ 12 for the AUX port. 12 is set, 1 is not. dmesg shows:
> > 
> > mice: PS/2 mouse device common for all mice
> > serio: i8042 KBD port at 0x60,0x64 irq 1
> > input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
> > serio: i8042 AUX port at 0x60,0x64 irq 12
> 
> So it detected both the KBD and AUX ports properly, but for some reason
> it couldn't identify the attached keyboard.
> 
> Can you #define ATKBD_DEBUG in drivers/input/keyboard/atkbd.c? 
> Then you'll see what happened in' dmesg'.

        Just did. dmesg follows:

Linux version 2.5.25-dj2 (root@bellicha) (gcc version 2.95.3 20010315 (release)) #1 Sun Jul 14 01:50:09 PDT 2002
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009fc00 (usable)
 user: 000000000009fc00 - 00000000000a0000 (reserved)
 user: 00000000000f0000 - 0000000000100000 (reserved)
 user: 0000000000100000 - 000000001fff0000 (usable)
 user: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 user: 000000001fff3000 - 0000000020000000 (ACPI data)
 user: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=unix ro root=301 ether=0,0,0,eth0 ether=0,0,0,eth1 mem=512m devfs=mount video=aty128fb:mode:1280x1024,font:SUN12x22
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1133.510 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2228.22 BogoMIPS
Memory: 516620k/524224k available (1183k kernel code, 7216k reserved, 345k data, 244k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Machine check exception polling timer started.
CPU:     After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU:             Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1133.0164 MHz.
..... host bus clock speed is 266.0626 MHz.
cpu: 0, clocks: 266626, slice: 133313
CPU0<T0:266624,T1:133296,D:15,S:133313,C:266626>
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
spurious 8259A interrupt: IRQ7.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec: init pool 0, 1 entries, 12 bytes
biovec: init pool 1, 4 entries, 48 bytes
biovec: init pool 2, 16 entries, 192 bytes
biovec: init pool 3, 64 entries, 768 bytes
biovec: init pool 4, 128 entries, 1536 bytes
biovec: init pool 5, 256 entries, 3072 bytes
Journalled Block Device driver loaded
devfs: v1.17 (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
aty128fb: Rage128 BIOS located at segment C00C0000
aty128fb: Rage128 Pro TF (AGP) [chip rev 0x4] 32M 128-bit SDR SGRAM (1:1)
Console: switching to colour frame buffer device 80x30
fb0: ATY Rage128 frame buffer device on PCI
aty128fb: Rage128 MTRR set to ON
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.11
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xd0000000 64MB
[drm] Initialized r128 2.2.0 20010917 on minor 0
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xd0000000 64MB
[drm] Initialized radeon 1.3.1 20020611 on minor 1
block: 256 slots per queue, batch=32
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: VIA Technologies, Inc. Bus Master IDE, PCI slot 00:07.1
ATA: chipset rev.: 6
ATA: non-legacy mode: IRQ probe delayed
VP_IDE: VIA vt82c686b (rev 40) ATA UDMA100 controller on PCI 00:07.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 91531U3, DISK drive
hdb: WDC WD200AB-00BVA0, DISK drive
hdc: CD-W54E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
 hda: 30015216 sectors w/512KiB Cache, CHS=29777/16/63, UDMA(66)
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [1868/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 >
 hdb: 39102336 sectors w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
 /dev/ide/host0/bus0/target1/lun0: [PTBL] [2434/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 >
mice: PS/2 mouse device common for all mice
atkbd.c: Sent: f5
atkbd.c: Received fe
serio: i8042 KBD port at 0x60,0x64 irq 1
input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
.
.
.
.
eepro100.c:v1.09j-t 9/29/99 Donald Becker 
http://www.scyld.com/network/eepro100.
html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin 
<saw@saw.sw.com.sg> and others
PCI: Found IRQ 10 for device 00:08.0
eth0: Intel Corp. 82557 [Ethernet Pro 100], 00:90:27:10:08:1C, IRQ 10.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 689661-004, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x24c9f043).
  Receiver lock-up workaround activated.
parport0: PC-style at 0x278, irq 5 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).

> Most likely you have a somewhat unusual keyboard - it may be responding
> too slow perhaps, so that the driver times out - or doesn't support some
> of the commands the driver expects to use.
> 
> Or the mouse kills the keyboard. This also can happen - they share
> common resources. This would need more debugging then.
> 
> So, what's the keyboard, what's the mouse, and what's the mainboard
> exactly? 

        I've tried this with 3 different keyboards, 3 different mice, and 3 
combinations of each: wireless 104-key ps/2 keyboard. PS/2 cord from the box 
to the keyboard base, actual keyboard is wireless. bought it 4 years ago; 
104-key keybord (w/power, sleep, and wake keys) bought 3 weeks ago, 104-key 
acer keyboard from a P100 from 7 years ago. all 3 mice are PS/2 mice; Acer 
mouse to go along with the Acer box and Acer keyboard, Microsoft PS/2 mouse, 
and MS Optical wheel mouse. The Acer and MS PS/2 mouse are straight PS/2. The 
optical is IMPS/2. motherboard is a Tyan S2390B, VIA82c686b chipset. 

        All 9 different combinations gave the same result. Mouse working, 
keyboard not working.

                                                        BL.
-- 
Brad Littlejohn                         | Email:        tyketto@wizard.com
Unix Systems Administrator,             |           tyketto@ozemail.com.au
Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
  PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF

Re: kbd not functioning in 2.5.25-dj2

[Russell King]

On Sun, Jul 14, 2002 at 03:18:54AM -0700, A Guy Called Tyketto wrote:
> mice: PS/2 mouse device common for all mice
> atkbd.c: Sent: f5
> atkbd.c: Received fe
> serio: i8042 KBD port at 0x60,0x64 irq 1

I've seen this when I was first looking into the input stuff recently.
I think it was caused by the keyboard getting confused after I was
testing the data and clock lines on the interface.

One fix I came up with (and discarded) was to try to reset the keyboard
3 times, and only fail if it failed all 3 times.  The other fix (the one
I ended up using) doesn't make sense to i8042 keyboard controllers.

-- 
Russell King (rmk@arm.linux.org.uk)                The developer of ARM Linux
             http://www.arm.linux.org.uk/personal/aboutme.html

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sun, Jul 14, 2002 at 03:18:54AM -0700, A Guy Called Tyketto wrote:
> On Sun, Jul 14, 2002 at 10:05:09AM +0200, Vojtech Pavlik wrote:
> > 
> > Unfortunately this doesn't list interrupts, which happened, but are no
> > longer claimed by any driver - and the i8042 driver frees the interrupt
> > when it detects no device.
> 
>         Interesting.. it detects it, as per dmesg below, but then it frees 
> it.. really interesting..
> 
> > >         From the above part of .config, IRQ1 should be set for the keyboard, 
> > > while IRQ 12 for the AUX port. 12 is set, 1 is not. dmesg shows:
> > > 
> > > mice: PS/2 mouse device common for all mice
> > > serio: i8042 KBD port at 0x60,0x64 irq 1
> > > input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
> > > serio: i8042 AUX port at 0x60,0x64 irq 12
> > 
> > So it detected both the KBD and AUX ports properly, but for some reason
> > it couldn't identify the attached keyboard.
> > 
> > Can you #define ATKBD_DEBUG in drivers/input/keyboard/atkbd.c? 
> > Then you'll see what happened in' dmesg'.
> 
>         Just did. dmesg follows:
> 
> mice: PS/2 mouse device common for all mice
> atkbd.c: Sent: f5
> atkbd.c: Received fe
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> NET4: Linux TCP/IP 1.0 for NET4.0
> 

Ok. So this is the cause. The driver gets a '0xfe' response, which means
"error, command not supported, or device not present'.

A keyboard must support the 0xf5 command ('reset').

So, the error response might be coming either from the mouse, or the
controller, and somehow gets passed to the keyboard (they unfortunately
share the same registers), or the response somes from the mouse driver
first trying to probe for a mouse on the port.

So, please #define I8042_DEBUG_IO in drivers/input/serio/i8042.h as
well, and try again. Then we'll know more.

> > Most likely you have a somewhat unusual keyboard - it may be responding
> > too slow perhaps, so that the driver times out - or doesn't support some
> > of the commands the driver expects to use.
> > 
> > Or the mouse kills the keyboard. This also can happen - they share
> > common resources. This would need more debugging then.
> > 
> > So, what's the keyboard, what's the mouse, and what's the mainboard
> > exactly? 
> 
>         I've tried this with 3 different keyboards, 3 different mice, and 3 
> combinations of each: wireless 104-key ps/2 keyboard. PS/2 cord from the box 
> to the keyboard base, actual keyboard is wireless. bought it 4 years ago; 
> 104-key keybord (w/power, sleep, and wake keys) bought 3 weeks ago, 104-key 
> acer keyboard from a P100 from 7 years ago. all 3 mice are PS/2 mice; Acer 
> mouse to go along with the Acer box and Acer keyboard, Microsoft PS/2 mouse, 
> and MS Optical wheel mouse. The Acer and MS PS/2 mouse are straight PS/2. The 
> optical is IMPS/2. motherboard is a Tyan S2390B, VIA82c686b chipset. 
> 
>         All 9 different combinations gave the same result. Mouse working, 
> keyboard not working.

Very intersting. It works for me on my via82c686b.

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[Andries Brouwer]

On Sun, Jul 14, 2002 at 02:01:53PM +0200, Vojtech Pavlik wrote:

> > mice: PS/2 mouse device common for all mice
> > atkbd.c: Sent: f5
> > atkbd.c: Received fe
> > serio: i8042 KBD port at 0x60,0x64 irq 1
> 
> Ok. So this is the cause. The driver gets a '0xfe' response, which means
> "error, command not supported, or device not present'.
> 
> A keyboard must support the 0xf5 command ('reset').

I have not followed the discussion and probably say something
entirely out of context. But from the good old days I seem to
recall commands 0xff "reset", 0xf5 "set defaults and deactivate"
and reply 0xfe "please resend".

In principle nothing is wrong when one gets a 0xfe.
The request is just: please say that again.

Andries

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sun, Jul 14, 2002 at 02:17:31PM +0200, Andries Brouwer wrote:
> On Sun, Jul 14, 2002 at 02:01:53PM +0200, Vojtech Pavlik wrote:
> 
> > > mice: PS/2 mouse device common for all mice
> > > atkbd.c: Sent: f5
> > > atkbd.c: Received fe
> > > serio: i8042 KBD port at 0x60,0x64 irq 1
> > 
> > Ok. So this is the cause. The driver gets a '0xfe' response, which means
> > "error, command not supported, or device not present'.
> > 
> > A keyboard must support the 0xf5 command ('reset').
> 
> I have not followed the discussion and probably say something
> entirely out of context. But from the good old days I seem to
> recall commands 0xff "reset", 0xf5 "set defaults and deactivate"
> and reply 0xfe "please resend".
> 
> In principle nothing is wrong when one gets a 0xfe.
> The request is just: please say that again.

Commands:

0xf5 - n/a - Keyboard
  Reset and disable keyboard. The keyboard performs a reset to a power
on state (without affecting the LEDs) and stops generating events.

0xff - 1*R - Keyboard / Mouse
  Reset and perform the Basic Assurance Test (BAT). Device returns a
BAT completion code 0xaa. If it's a keyboard, then switches to scancode
set 2. If it's a mouse, it also sends 0x00, 0x03 or 0x04 after 0xaa.
Since BAT is also triggered on power-on, a device will send 0xaa
immediately after being plugged in.

Responses:

0xfe
  Resend. Keyboard will send this if it didn't receive the last command
correctly.

Unfortunately, 0xfe also happens when you send a command to a keyboard
that's not plugged, or when the keyboard doesn't understand the command.
Resending in those cases (which are the most common) would cause an
infinite loop ...

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[Rogier Wolff]

Vojtech Pavlik wrote:
> > > > mice: PS/2 mouse device common for all mice
> > > > atkbd.c: Sent: f5
> > > > atkbd.c: Received fe
> > > > serio: i8042 KBD port at 0x60,0x64 irq 1
[...]
> Responses:
> 
> 0xfe
>   Resend. Keyboard will send this if it didn't receive the last command
> correctly.
> 
> Unfortunately, 0xfe also happens when you send a command to a keyboard
> that's not plugged, or when the keyboard doesn't understand the command.
> Resending in those cases (which are the most common) would cause an
> infinite loop ...

Not if implemented correctly. 

Set the retry counter to 5 at the beginning. 

    if you get 0xfe: decrement retry counter, 
	if 0 : 
	    no keyboard connected. Give up. 
	else 
	    Just immediately resend the last command
    else
	set the retry counter to 5 again. 
	process returned code


Roger. 



-- 
** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* There are old pilots, and there are bold pilots. 
* There are also old, bald pilots. 

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sun, Jul 14, 2002 at 03:36:20PM +0200, Rogier Wolff wrote:

> Vojtech Pavlik wrote:
> > > > > mice: PS/2 mouse device common for all mice
> > > > > atkbd.c: Sent: f5
> > > > > atkbd.c: Received fe
> > > > > serio: i8042 KBD port at 0x60,0x64 irq 1
> [...]
> > Responses:
> > 
> > 0xfe
> >   Resend. Keyboard will send this if it didn't receive the last command
> > correctly.
> > 
> > Unfortunately, 0xfe also happens when you send a command to a keyboard
> > that's not plugged, or when the keyboard doesn't understand the command.
> > Resending in those cases (which are the most common) would cause an
> > infinite loop ...
> 
> Not if implemented correctly. 
> 
> Set the retry counter to 5 at the beginning. 
> 
>     if you get 0xfe: decrement retry counter, 
> 	if 0 : 
> 	    no keyboard connected. Give up. 
> 	else 
> 	    Just immediately resend the last command
>     else
> 	set the retry counter to 5 again. 
> 	process returned code

Yes. Sure. I knew someone will suggest that. :) The only problem is,
I've never seen a keyboard sending 0xfe because it wants the command
sent again. Under normal circumstances, there aren't bit errors on the
cable.

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[Russell King]

On Sun, Jul 14, 2002 at 07:32:36PM +0200, Vojtech Pavlik wrote:
> Yes. Sure. I knew someone will suggest that. :) The only problem is,
> I've never seen a keyboard sending 0xfe because it wants the command
> sent again. Under normal circumstances, there aren't bit errors on the
> cable.

I think you missed my mail at the beginning of this thread.

-- 
Russell King (rmk@arm.linux.org.uk)                The developer of ARM Linux
             http://www.arm.linux.org.uk/personal/aboutme.html

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sun, Jul 14, 2002 at 06:49:54PM +0100, Russell King wrote:

> On Sun, Jul 14, 2002 at 07:32:36PM +0200, Vojtech Pavlik wrote:
> > Yes. Sure. I knew someone will suggest that. :) The only problem is,
> > I've never seen a keyboard sending 0xfe because it wants the command
> > sent again. Under normal circumstances, there aren't bit errors on the
> > cable.
> 
> I think you missed my mail at the beginning of this thread.

I read it. Well, let's first see where the 0xfe really comes from. :)

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[Russell King]

On Sun, Jul 14, 2002 at 07:59:02PM +0200, Vojtech Pavlik wrote:
> On Sun, Jul 14, 2002 at 06:49:54PM +0100, Russell King wrote:
> > On Sun, Jul 14, 2002 at 07:32:36PM +0200, Vojtech Pavlik wrote:
> > > Yes. Sure. I knew someone will suggest that. :) The only problem is,
> > > I've never seen a keyboard sending 0xfe because it wants the command
> > > sent again. Under normal circumstances, there aren't bit errors on the
> > > cable.
> > 
> > I think you missed my mail at the beginning of this thread.
> 
> I read it. Well, let's first see where the 0xfe really comes from. :)

Err, the keyboard.  The hardware I saw it on was with just a plain
PS/2 port with zero inteligence within; it's effectively a serial port
talking direct to the keyboard.

-- 
Russell King (rmk@arm.linux.org.uk)                The developer of ARM Linux
             http://www.arm.linux.org.uk/personal/aboutme.html

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sun, Jul 14, 2002 at 07:07:59PM +0100, Russell King wrote:
> On Sun, Jul 14, 2002 at 07:59:02PM +0200, Vojtech Pavlik wrote:
> > On Sun, Jul 14, 2002 at 06:49:54PM +0100, Russell King wrote:
> > > On Sun, Jul 14, 2002 at 07:32:36PM +0200, Vojtech Pavlik wrote:
> > > > Yes. Sure. I knew someone will suggest that. :) The only problem is,
> > > > I've never seen a keyboard sending 0xfe because it wants the command
> > > > sent again. Under normal circumstances, there aren't bit errors on the
> > > > cable.
> > > 
> > > I think you missed my mail at the beginning of this thread.
> > 
> > I read it. Well, let's first see where the 0xfe really comes from. :)
> 
> Err, the keyboard.  The hardware I saw it on was with just a plain
> PS/2 port with zero inteligence within; it's effectively a serial port
> talking direct to the keyboard.

I was talking about the one from Tyketto, yours was most likely
happening because the keyboard considered the line testing as a
beginning of a character being sent, then attached the rest of the
initial 0xf5 to it and got a nonsense. This is not exactly a bit error
on the wire.

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[Andries Brouwer]

On Sun, Jul 14, 2002 at 02:37:02PM +0200, Vojtech Pavlik wrote:

>>>> atkbd.c: Sent: f5
>>>> atkbd.c: Received fe

>>> Ok. So this is the cause. The driver gets a '0xfe' response, which means
>>> "error, command not supported, or device not present'.

>> In principle nothing is wrong when one gets a 0xfe.
>> The request is just: please say that again.

> 0xfe
>   Resend. Keyboard will send this if it didn't receive the last command
> correctly.
> 
> Unfortunately, 0xfe also happens when you send a command to a keyboard
> that's not plugged, or when the keyboard doesn't understand the command.
> Resending in those cases (which are the most common) would cause an
> infinite loop ...

Not so pessimistic. The first resend may be needed because the keyboard
does not stabilize so quickly after power on. 
You wait 25 ms and try again. Wait 500 ms and try again. Give up.

But if this is really the first command sent to the keyboard, then
I think 0xf5 is uncommon.

One usually sees a sequence like:
Send 0xaa to port 64. Wait for the 0x55 ack.
Do things to enable A20, IRQ1, set scancode translation.
Send 0xff to port 60. Wait for the 0xfa ack. Wait for the 0xaa good status.

When 0xf5 fails, one might consider trying a more standard sequence.

Andries

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sun, Jul 14, 2002 at 07:37:29PM +0200, Andries Brouwer wrote:

> On Sun, Jul 14, 2002 at 02:37:02PM +0200, Vojtech Pavlik wrote:
> 
> >>>> atkbd.c: Sent: f5
> >>>> atkbd.c: Received fe
> 
> >>> Ok. So this is the cause. The driver gets a '0xfe' response, which means
> >>> "error, command not supported, or device not present'.
> 
> >> In principle nothing is wrong when one gets a 0xfe.
> >> The request is just: please say that again.
> 
> > 0xfe
> >   Resend. Keyboard will send this if it didn't receive the last command
> > correctly.
> > 
> > Unfortunately, 0xfe also happens when you send a command to a keyboard
> > that's not plugged, or when the keyboard doesn't understand the command.
> > Resending in those cases (which are the most common) would cause an
> > infinite loop ...
> 
> Not so pessimistic. The first resend may be needed because the keyboard
> does not stabilize so quickly after power on. 
> You wait 25 ms and try again. Wait 500 ms and try again. Give up.
> 
> But if this is really the first command sent to the keyboard, then
> I think 0xf5 is uncommon.
> 
> One usually sees a sequence like:
> Send 0xaa to port 64. Wait for the 0x55 ack.
> Do things to enable A20, IRQ1, set scancode translation.
> Send 0xff to port 60. Wait for the 0xfa ack. Wait for the 0xaa good status.

The problem is that 0xff takes too long to finish to be done while Linux
is booting, and it has already been done by the BIOS.

> When 0xf5 fails, one might consider trying a more standard sequence.

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[Russell King]

On Sun, Jul 14, 2002 at 08:01:19PM +0200, Vojtech Pavlik wrote:
> On Sun, Jul 14, 2002 at 07:37:29PM +0200, Andries Brouwer wrote:
> > Send 0xff to port 60. Wait for the 0xfa ack. Wait for the 0xaa good status.
> 
> The problem is that 0xff takes too long to finish to be done while Linux
> is booting, and it has already been done by the BIOS.

Ah hem, "bios".  Do we trust that hunk of proprietary code now?  Note
also that pc_keyb.c allowed for embedded devices where there is no BIOS.
That said, not sending 0xff seems to be fine on the keyboards I have
here.  I wouldn't like to guarantee that it's fine across all keyboards
though, just like sending 0xAA on reconnect isn't guaranteed.

-- 
Russell King (rmk@arm.linux.org.uk)                The developer of ARM Linux
             http://www.arm.linux.org.uk/personal/aboutme.html

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sun, Jul 14, 2002 at 07:13:01PM +0100, Russell King wrote:

> On Sun, Jul 14, 2002 at 08:01:19PM +0200, Vojtech Pavlik wrote:
> > On Sun, Jul 14, 2002 at 07:37:29PM +0200, Andries Brouwer wrote:
> > > Send 0xff to port 60. Wait for the 0xfa ack. Wait for the 0xaa good status.
> > 
> > The problem is that 0xff takes too long to finish to be done while Linux
> > is booting, and it has already been done by the BIOS.
> 
> Ah hem, "bios".  Do we trust that hunk of proprietary code now?  Note
> also that pc_keyb.c allowed for embedded devices where there is no BIOS.
> That said, not sending 0xff seems to be fine on the keyboards I have
> here.  I wouldn't like to guarantee that it's fine across all keyboards
> though, just like sending 0xAA on reconnect isn't guaranteed.

Well, so far I've tested with about 20 different weird keyboards ...
let's see. If the future shows we need 0xff, there's no problem adding
it.

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[Maciej W. Rozycki]

On Sun, 14 Jul 2002, Vojtech Pavlik wrote:

> The problem is that 0xff takes too long to finish to be done while Linux
> is booting, and it has already been done by the BIOS.

 Certainly, you don't have to poll, do you?  Just send the command and let
the kernel proceed.  Resume initialization in the IRQ handler, when a
response arrives (or never).

-- 
+  Maciej W. Rozycki, Technical University of Gdansk, Poland   +
+--------------------------------------------------------------+
+        e-mail: macro@ds2.pg.gda.pl, PGP key available        +

Re: kbd not functioning in 2.5.25-dj2

[A Guy Called Tyketto]

On Sun, Jul 14, 2002 at 02:01:53PM +0200, Vojtech Pavlik wrote:
> > 
> >         Just did. dmesg follows:
> > 
> > mice: PS/2 mouse device common for all mice
> > atkbd.c: Sent: f5
> > atkbd.c: Received fe
> > serio: i8042 KBD port at 0x60,0x64 irq 1
> > input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
> > serio: i8042 AUX port at 0x60,0x64 irq 12
> > NET4: Linux TCP/IP 1.0 for NET4.0
> > 
> 
> Ok. So this is the cause. The driver gets a '0xfe' response, which means
> "error, command not supported, or device not present'.
> 
> A keyboard must support the 0xf5 command ('reset').
> 
> So, the error response might be coming either from the mouse, or the
> controller, and somehow gets passed to the keyboard (they unfortunately
> share the same registers), or the response somes from the mouse driver
> first trying to probe for a mouse on the port.
> 
> So, please #define I8042_DEBUG_IO in drivers/input/serio/i8042.h as
> well, and try again. Then we'll know more.
> 

        Just gave that a go.. no change in the dmesg output. Nothing written 
out to stdout or anything via syslogd/klogd. See above for that output.

                                                        BL.
-- 
Brad Littlejohn                         | Email:        tyketto@wizard.com
Unix Systems Administrator,             |           tyketto@ozemail.com.au
Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
  PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sun, Jul 14, 2002 at 02:30:33PM -0700, A Guy Called Tyketto wrote:
> On Sun, Jul 14, 2002 at 02:01:53PM +0200, Vojtech Pavlik wrote:
> > > 
> > >         Just did. dmesg follows:
> > > 
> > > mice: PS/2 mouse device common for all mice
> > > atkbd.c: Sent: f5
> > > atkbd.c: Received fe
> > > serio: i8042 KBD port at 0x60,0x64 irq 1
> > > input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
> > > serio: i8042 AUX port at 0x60,0x64 irq 12
> > > NET4: Linux TCP/IP 1.0 for NET4.0
> > > 
> > 
> > Ok. So this is the cause. The driver gets a '0xfe' response, which means
> > "error, command not supported, or device not present'.
> > 
> > A keyboard must support the 0xf5 command ('reset').
> > 
> > So, the error response might be coming either from the mouse, or the
> > controller, and somehow gets passed to the keyboard (they unfortunately
> > share the same registers), or the response somes from the mouse driver
> > first trying to probe for a mouse on the port.
> > 
> > So, please #define I8042_DEBUG_IO in drivers/input/serio/i8042.h as
> > well, and try again. Then we'll know more.
> > 
> 
>         Just gave that a go.. no change in the dmesg output. Nothing written 
> out to stdout or anything via syslogd/klogd. See above for that output.

Are you sure you didn't leave the #undef in that file?

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[A Guy Called Tyketto]

On Mon, Jul 15, 2002 at 05:00:00AM +0200, Vojtech Pavlik wrote:
> > > A keyboard must support the 0xf5 command ('reset').
> > > 
> > > So, the error response might be coming either from the mouse, or the
> > > controller, and somehow gets passed to the keyboard (they unfortunately
> > > share the same registers), or the response somes from the mouse driver
> > > first trying to probe for a mouse on the port.
> > > 
> > > So, please #define I8042_DEBUG_IO in drivers/input/serio/i8042.h as
> > > well, and try again. Then we'll know more.
> > > 
> > 
> >         Just gave that a go.. no change in the dmesg output. Nothing written 
> > out to stdout or anything via syslogd/klogd. See above for that output.
> 
> Are you sure you didn't leave the #undef in that file?

        Sorry about that.. I defined before the #undef. made the change and 
recompiled. dmesg is below:

block: 256 slots per queue, batch=32
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: VIA Technologies, Inc. Bus Master IDE, PCI slot 00:07.1
ATA: chipset rev.: 6
ATA: non-legacy mode: IRQ probe delayed
VP_IDE: VIA vt82c686b (rev 40) ATA UDMA100 controller on PCI 00:07.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 91531U3, DISK drive
hdb: WDC WD200AB-00BVA0, DISK drive
hdc: CD-W54E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
 hda: 30015216 sectors w/512KiB Cache, CHS=29777/16/63, UDMA(66)
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [1868/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 >
 hdb: 39102336 sectors w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
 /dev/ide/host0/bus0/target1/lun0: [PTBL] [2434/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 >
mice: PS/2 mouse device common for all mice
i8042.c: 20 -> i8042 (command) [0]
i8042.c: 47 <- i8042 (return) [0]
i8042.c: 60 -> i8042 (command) [0]
i8042.c: 56 -> i8042 (parameter) [0]
i8042.c: 60 -> i8042 (command) [0]
i8042.c: 47 -> i8042 (parameter) [0]
i8042.c: f6 -> i8042 (kbd-data) [0]
i8042.c: fa <- i8042 (interrupt-kbd) [3]
i8042.c: f2 -> i8042 (kbd-data) [3]
i8042.c: fa <- i8042 (interrupt-kbd) [6]
i8042.c: ab <- i8042 (interrupt-kbd) [7]
i8042.c: 60 -> i8042 (command) [7]
i8042.c: 56 -> i8042 (parameter) [7]
i8042.c: 60 -> i8042 (command) [7]
i8042.c: 47 -> i8042 (parameter) [7]
atkbd.c: Sent: f5
i8042.c: f5 -> i8042 (kbd-data) [7]
i8042.c: 60 -> i8042 (command) [17]
i8042.c: 56 -> i8042 (parameter) [17]
i8042.c: fe <- i8042 (interrupt-kbd) [18]
atkbd.c: Received fe
serio: i8042 KBD port at 0x60,0x64 irq 1
i8042.c: d3 -> i8042 (command) [20]
i8042.c: 5a -> i8042 (parameter) [20]
i8042.c: a5 <- i8042 (return) [20]
i8042.c: a9 -> i8042 (command) [20]
i8042.c: 00 <- i8042 (return) [20]
i8042.c: a7 -> i8042 (command) [20]
i8042.c: 20 -> i8042 (command) [20]
i8042.c: 76 <- i8042 (return) [20]
i8042.c: a9 -> i8042 (command) [20]
i8042.c: 00 <- i8042 (return) [20]
i8042.c: a8 -> i8042 (command) [20]
i8042.c: 20 -> i8042 (command) [20]
i8042.c: 56 <- i8042 (return) [20]
i8042.c: 60 -> i8042 (command) [20]
i8042.c: 74 -> i8042 (parameter) [20]
i8042.c: 60 -> i8042 (command) [20]
i8042.c: 56 -> i8042 (parameter) [20]
i8042.c: d4 -> i8042 (command) [20]
i8042.c: f6 -> i8042 (parameter) [20]
i8042.c: 60 -> i8042 (command) [20]
i8042.c: 56 -> i8042 (parameter) [20]
i8042.c: fa <- i8042 (interrupt-aux) [21]
i8042.c: d4 -> i8042 (command) [21]
i8042.c: f2 -> i8042 (parameter) [21]
i8042.c: 60 -> i8042 (command) [21]
i8042.c: 56 -> i8042 (parameter) [21]
i8042.c: fa <- i8042 (interrupt-aux) [22]
i8042.c: 00 <- i8042 (interrupt-aux) [23]
i8042.c: d4 -> i8042 (command) [23]
i8042.c: e8 -> i8042 (parameter) [23]
i8042.c: 60 -> i8042 (command) [23]
i8042.c: 56 -> i8042 (parameter) [23]
i8042.c: fa <- i8042 (interrupt-aux) [24]
i8042.c: d4 -> i8042 (command) [24]
i8042.c: 03 -> i8042 (parameter) [24]
i8042.c: 60 -> i8042 (command) [24]
i8042.c: 56 -> i8042 (parameter) [24]
i8042.c: fa <- i8042 (interrupt-aux) [25]
i8042.c: d4 -> i8042 (command) [26]
i8042.c: e6 -> i8042 (parameter) [26]
i8042.c: 60 -> i8042 (command) [26]
i8042.c: 56 -> i8042 (parameter) [26]
i8042.c: fa <- i8042 (interrupt-aux) [27]
i8042.c: d4 -> i8042 (command) [27]
i8042.c: e6 -> i8042 (parameter) [27]
i8042.c: 60 -> i8042 (command) [27]
i8042.c: 56 -> i8042 (parameter) [27]
i8042.c: fa <- i8042 (interrupt-aux) [28]
i8042.c: d4 -> i8042 (command) [28]
i8042.c: e6 -> i8042 (parameter) [28]
i8042.c: 60 -> i8042 (command) [28]
i8042.c: 56 -> i8042 (parameter) [28]
i8042.c: fa <- i8042 (interrupt-aux) [29]
i8042.c: d4 -> i8042 (command) [29]
i8042.c: e9 -> i8042 (parameter) [29]
i8042.c: 60 -> i8042 (command) [29]
i8042.c: 56 -> i8042 (parameter) [29]
i8042.c: fa <- i8042 (interrupt-aux) [30]
i8042.c: 00 <- i8042 (interrupt-aux) [31]
i8042.c: 03 <- i8042 (interrupt-aux) [32]
i8042.c: 64 <- i8042 (interrupt-aux) [33]
i8042.c: d4 -> i8042 (command) [33]
i8042.c: e8 -> i8042 (parameter) [33]
i8042.c: 60 -> i8042 (command) [33]
i8042.c: 56 -> i8042 (parameter) [33]
i8042.c: fa <- i8042 (interrupt-aux) [34]
i8042.c: d4 -> i8042 (command) [34]
i8042.c: 00 -> i8042 (parameter) [34]
i8042.c: 60 -> i8042 (command) [34]
i8042.c: 56 -> i8042 (parameter) [34]
i8042.c: fa <- i8042 (interrupt-aux) [35]
i8042.c: d4 -> i8042 (command) [35]
i8042.c: e6 -> i8042 (parameter) [35]
i8042.c: 60 -> i8042 (command) [35]
i8042.c: 56 -> i8042 (parameter) [35]
i8042.c: fa <- i8042 (interrupt-aux) [36]
i8042.c: d4 -> i8042 (command) [36]
i8042.c: e6 -> i8042 (parameter) [36]
i8042.c: 60 -> i8042 (command) [36]
i8042.c: 56 -> i8042 (parameter) [36]
i8042.c: fa <- i8042 (interrupt-aux) [37]
i8042.c: d4 -> i8042 (command) [37]
i8042.c: e6 -> i8042 (parameter) [37]
i8042.c: 60 -> i8042 (command) [37]
i8042.c: 56 -> i8042 (parameter) [37]
i8042.c: fa <- i8042 (interrupt-aux) [38]
i8042.c: d4 -> i8042 (command) [38]
i8042.c: e9 -> i8042 (parameter) [38]
i8042.c: 60 -> i8042 (command) [38]
i8042.c: 56 -> i8042 (parameter) [38]
i8042.c: fa <- i8042 (interrupt-aux) [39]
i8042.c: 00 <- i8042 (interrupt-aux) [40]
i8042.c: 00 <- i8042 (interrupt-aux) [41]
i8042.c: 64 <- i8042 (interrupt-aux) [42]
i8042.c: d4 -> i8042 (command) [42]
i8042.c: f3 -> i8042 (parameter) [42]
i8042.c: 60 -> i8042 (command) [42]
i8042.c: 56 -> i8042 (parameter) [42]
i8042.c: fa <- i8042 (interrupt-aux) [43]
i8042.c: d4 -> i8042 (command) [43]
i8042.c: c8 -> i8042 (parameter) [43]
i8042.c: 60 -> i8042 (command) [43]
i8042.c: 56 -> i8042 (parameter) [43]
i8042.c: fa <- i8042 (interrupt-aux) [44]
i8042.c: d4 -> i8042 (command) [44]
i8042.c: f3 -> i8042 (parameter) [44]
i8042.c: 60 -> i8042 (command) [44]
i8042.c: 56 -> i8042 (parameter) [44]
i8042.c: fa <- i8042 (interrupt-aux) [45]
i8042.c: d4 -> i8042 (command) [45]
i8042.c: 64 -> i8042 (parameter) [45]
i8042.c: 60 -> i8042 (command) [45]
i8042.c: 56 -> i8042 (parameter) [45]
i8042.c: fa <- i8042 (interrupt-aux) [46]
i8042.c: d4 -> i8042 (command) [46]
i8042.c: f3 -> i8042 (parameter) [46]
i8042.c: 60 -> i8042 (command) [46]
i8042.c: 56 -> i8042 (parameter) [46]
i8042.c: fa <- i8042 (interrupt-aux) [47]
i8042.c: d4 -> i8042 (command) [47]
i8042.c: 50 -> i8042 (parameter) [47]
i8042.c: 60 -> i8042 (command) [47]
i8042.c: 56 -> i8042 (parameter) [47]
i8042.c: fa <- i8042 (interrupt-aux) [48]
i8042.c: d4 -> i8042 (command) [48]
i8042.c: f2 -> i8042 (parameter) [48]
i8042.c: 60 -> i8042 (command) [48]
i8042.c: 56 -> i8042 (parameter) [48]
i8042.c: fa <- i8042 (interrupt-aux) [49]
i8042.c: 03 <- i8042 (interrupt-aux) [50]
i8042.c: d4 -> i8042 (command) [50]
i8042.c: f3 -> i8042 (parameter) [50]
i8042.c: 60 -> i8042 (command) [50]
i8042.c: 56 -> i8042 (parameter) [50]
i8042.c: fa <- i8042 (interrupt-aux) [51]
i8042.c: d4 -> i8042 (command) [51]
i8042.c: c8 -> i8042 (parameter) [51]
i8042.c: 60 -> i8042 (command) [51]
i8042.c: 56 -> i8042 (parameter) [51]
i8042.c: fa <- i8042 (interrupt-aux) [52]
i8042.c: d4 -> i8042 (command) [52]
i8042.c: f3 -> i8042 (parameter) [52]
i8042.c: 60 -> i8042 (command) [52]
i8042.c: 56 -> i8042 (parameter) [52]
i8042.c: fa <- i8042 (interrupt-aux) [53]
i8042.c: d4 -> i8042 (command) [53]
i8042.c: c8 -> i8042 (parameter) [53]
i8042.c: 60 -> i8042 (command) [53]
i8042.c: 56 -> i8042 (parameter) [53]
i8042.c: fa <- i8042 (interrupt-aux) [54]
i8042.c: d4 -> i8042 (command) [54]
i8042.c: f3 -> i8042 (parameter) [54]
i8042.c: 60 -> i8042 (command) [54]
i8042.c: 56 -> i8042 (parameter) [54]
i8042.c: fa <- i8042 (interrupt-aux) [55]
i8042.c: d4 -> i8042 (command) [55]
i8042.c: 50 -> i8042 (parameter) [55]
i8042.c: 60 -> i8042 (command) [55]
i8042.c: 56 -> i8042 (parameter) [55]
i8042.c: fa <- i8042 (interrupt-aux) [56]
i8042.c: d4 -> i8042 (command) [56]
i8042.c: f2 -> i8042 (parameter) [56]
i8042.c: 60 -> i8042 (command) [56]
i8042.c: 56 -> i8042 (parameter) [56]
i8042.c: fa <- i8042 (interrupt-aux) [57]
i8042.c: 03 <- i8042 (interrupt-aux) [58]
input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
i8042.c: d4 -> i8042 (command) [60]
i8042.c: f3 -> i8042 (parameter) [60]
i8042.c: 60 -> i8042 (command) [60]
i8042.c: 56 -> i8042 (parameter) [60]
i8042.c: fa <- i8042 (interrupt-aux) [61]
i8042.c: d4 -> i8042 (command) [61]
i8042.c: 64 -> i8042 (parameter) [61]
i8042.c: 60 -> i8042 (command) [61]
i8042.c: 56 -> i8042 (parameter) [61]
i8042.c: fa <- i8042 (interrupt-aux) [62]
i8042.c: d4 -> i8042 (command) [62]
i8042.c: f3 -> i8042 (parameter) [62]
i8042.c: 60 -> i8042 (command) [62]
i8042.c: 56 -> i8042 (parameter) [62]
i8042.c: fa <- i8042 (interrupt-aux) [63]
i8042.c: d4 -> i8042 (command) [63]
i8042.c: c8 -> i8042 (parameter) [63]
i8042.c: 60 -> i8042 (command) [63]
i8042.c: 56 -> i8042 (parameter) [63]
i8042.c: fa <- i8042 (interrupt-aux) [64]
i8042.c: d4 -> i8042 (command) [64]
i8042.c: e8 -> i8042 (parameter) [64]
i8042.c: 60 -> i8042 (command) [64]
i8042.c: 56 -> i8042 (parameter) [64]
i8042.c: fa <- i8042 (interrupt-aux) [65]
i8042.c: d4 -> i8042 (command) [65]
i8042.c: 03 -> i8042 (parameter) [65]
i8042.c: 60 -> i8042 (command) [65]
i8042.c: 56 -> i8042 (parameter) [65]
i8042.c: fa <- i8042 (interrupt-aux) [66]
i8042.c: d4 -> i8042 (command) [67]
i8042.c: e6 -> i8042 (parameter) [67]
i8042.c: 60 -> i8042 (command) [67]
i8042.c: 56 -> i8042 (parameter) [67]
i8042.c: fa <- i8042 (interrupt-aux) [68]
i8042.c: d4 -> i8042 (command) [68]
i8042.c: ea -> i8042 (parameter) [68]
i8042.c: 60 -> i8042 (command) [68]
i8042.c: 56 -> i8042 (parameter) [68]
i8042.c: fa <- i8042 (interrupt-aux) [69]
i8042.c: d4 -> i8042 (command) [69]
i8042.c: f4 -> i8042 (parameter) [69]
i8042.c: 60 -> i8042 (command) [69]
i8042.c: 56 -> i8042 (parameter) [69]
i8042.c: fa <- i8042 (interrupt-aux) [70]
serio: i8042 AUX port at 0x60,0x64 irq 12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 244k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.


        There ya go.

                                                        BL.
-- 
Brad Littlejohn                         | Email:        tyketto@wizard.com
Unix Systems Administrator,             |           tyketto@ozemail.com.au
Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
  PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF

Re: kbd not functioning in 2.5.25-dj2

[Alexander Hoogerhuis]

I mentioned this before, but I had major pains with the new input
drivers for keyboards not working with the Comapq Armada M700's, and
gave that up. Now I got a new Compaq N800c, which forced me onto 2.5.x
because of some of the hardware (Intel ICH3 et al).

I also had problems with input compiled in statically, and decided to
go play with modules and a network cables and test and fix
remotely. The end result is that with running RH7.3 and using modules
I get keyboard and mouse to work.

Below is the relevant bit of the .config file and here the mkinitrd
command-line used:

mkinitrd --preload input --preload evdev --preload keybdev --preload \
mousedev --preload serio --preload i8042 --preload atkbd --preload \
psmouse /boot/initrd-2.5.25-dj2-udiv-ide97.img 2.5.25-dj2-udiv-ide97

I used 2.5.25-dj2, and the posted fix on the list for the udiv compile
problem and IDE97.

I might be a bit tired, but there seem to be no proper dependency
between the modules, so that doing a modprobe atkbd doesnt get the
other modules, this the --preloads.

I only have two problems left is that I have a laptop with both a
stick and a glidepad, and the psmouse driver only enables the pad, and
not the stick. The other is that the rpm command segfaults for no
apparent reason under 2.5.x (tried .23, 24., and .25 and -dj varieties
of them). Same also happens with vim, second time it edits a file. 

mvh,
A

PS: Sitting with two laptops on a flight and a cross-over cable tends
to worry the stewardesses on board a lot :)
 
# Input device support
#
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461X is not set
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
CONFIG_I8042_REG_BASE=60
CONFIG_I8042_KBD_IRQ=1
CONFIG_I8042_AUX_IRQ=12
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_PS2SERKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE_USB is not set
# CONFIG_JOYSTICK_IFORCE_232 is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set


Vojtech Pavlik <vojtech@suse.cz> writes:

> Hi!
> 
> Okay, I wrote all these input drivers. So I'd like to see them working.  ;)
> 
> All you should need for proper function of both keyboard and mouse on a
> all-input-driver based system (like -dj kernels, or linux-input BK tree
> are) is:
> 
> CONFIG_INPUT=y
> CONFIG_INPUT_KEYBDEV=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_I8042_REG_BASE=60
> CONFIG_I8042_KBD_IRQ=1
> CONFIG_I8042_AUX_IRQ=12
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> 
> So I guess your problem is not enabling the i8042 module.
> 
> This code will also hopefully be enabled in 2.5.26 (though it'll be optional
> with the old driver still there).
> 
> On Sat, Jul 13, 2002 at 04:45:56AM -0400, Ed Sweetman wrote:
> > Nope, failure.  I'm not getting any reaction from the kernel at all
> > about the keyboard.  I'm including my config 
> > 
> > 
> > On Sat, 2002-07-13 at 04:01, Ed Sweetman wrote:
> > > 2.5.18 is the last time it worked for me I have basically the same exact
> > > config, the new input system seems to have undergone some changes since
> > > then though and now it's not behaving.  I will try setting the XTKBD
> > > setting and PS2SEDKBD or whatever it is.  
> > > 
> > > 
> > > On Sat, 2002-07-13 at 03:37, A Guy Called Tyketto wrote:
> > > > On Sat, Jul 13, 2002 at 03:24:09AM -0400, Ed Sweetman wrote:
> > > > > Same config as in my last post about the issue linking with this
> > > > > kernel.  I'm having my keyboard just not respond from boot.  I've got
> > > > > Input Device support built in and i had it as module and the keyboard is
> > > > > ps/2.  No idea what's going on here 
> > > > > 
> > > > 
> > > >         Just a "me too" here.. I've had this problem since around 2.5.15-dj 
> > > > and later, and have had input and keyboard support compiled into the kernel. 
> > > > Luckily I was able to get into the box via ssh, and check things. both 
> > > > keyboard and mouse are PS/2. If possible, see if you can do this, and check if 
> > > > IRQ 1 is not listed in /proc/interrupts. That is what is happening with me, 
> > > > while my mouse is working. For me to get my keyboard to work, I have to have 
> > > > the following set:
> > > > 
> > > > CONFIG_INPUT=y
> > > > CONFIG_INPUT_KEYBDEV=y
> > > > CONFIG_INPUT_MOUSEDEV=y
> > > > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > > > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > > > CONFIG_INPUT_EVDEV=y
> > > > CONFIG_INPUT_EVBUG=y
> > > > CONFIG_SERIO=y
> > > > CONFIG_SERIO_SERPORT=m
> > > > CONFIG_INPUT_KEYBOARD=y
> > > > CONFIG_KEYBOARD_ATKBD=y
> > > > CONFIG_KEYBOARD_XTKBD=y
> > > > CONFIG_INPUT_MOUSE=y
> > > > CONFIG_MOUSE_PS2=y
> > > > 
> > > >         This leaves me without using the new Input API, but with a working 
> > > > keyboard. with using the new API, mouse will work, keyboard will not. you can 
> > > > try these, and use the old setup (I assume will be made legacy by the time 2.6 
> > > > comes out), and let me know if they work. The new API seems to be working for 
> > > > some people, but not all.
> > > > 
> > > >                                                         BL.
> > > > -- 
> > > > Brad Littlejohn                         | Email:        tyketto@wizard.com
> > > > Unix Systems Administrator,             |           tyketto@ozemail.com.au
> > > > Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
> > > >   PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF
> > > > 
> > > > -
> > > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > > the body of a message to majordomo@vger.kernel.org
> > > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > > > Please read the FAQ at  http://www.tux.org/lkml/
> > > 
> > > 
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at  http://www.tux.org/lkml/
> > 
> 
> > #
> > # Automatically generated make config: don't edit
> > #
> > CONFIG_X86=y
> > # CONFIG_SBUS is not set
> > CONFIG_UID16=y
> > 
> > #
> > # Code maturity level options
> > #
> > CONFIG_EXPERIMENTAL=y
> > 
> > #
> > # General setup
> > #
> > CONFIG_NET=y
> > CONFIG_SYSVIPC=y
> > # CONFIG_BSD_PROCESS_ACCT is not set
> > CONFIG_SYSCTL=y
> > 
> > #
> > # Loadable module support
> > #
> > CONFIG_MODULES=y
> > # CONFIG_MODVERSIONS is not set
> > CONFIG_KMOD=y
> > 
> > #
> > # Processor type and features
> > #
> > # CONFIG_M386 is not set
> > # CONFIG_M486 is not set
> > # CONFIG_M586 is not set
> > # CONFIG_M586TSC is not set
> > # CONFIG_M586MMX is not set
> > # CONFIG_M686 is not set
> > # CONFIG_MPENTIUMIII is not set
> > CONFIG_MPENTIUM4=y
> > # CONFIG_MK6 is not set
> > # CONFIG_MK7 is not set
> > # CONFIG_MELAN is not set
> > # CONFIG_MCRUSOE is not set
> > # CONFIG_MWINCHIPC6 is not set
> > # CONFIG_MWINCHIP2 is not set
> > # CONFIG_MWINCHIP3D is not set
> > # CONFIG_MCYRIXIII is not set
> > CONFIG_X86_WP_WORKS_OK=y
> > CONFIG_X86_INVLPG=y
> > CONFIG_X86_CMPXCHG=y
> > CONFIG_X86_XADD=y
> > CONFIG_X86_BSWAP=y
> > CONFIG_X86_POPAD_OK=y
> > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> > CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> > CONFIG_X86_L1_CACHE_SHIFT=7
> > CONFIG_X86_TSC=y
> > CONFIG_X86_GOOD_APIC=y
> > CONFIG_X86_USE_PPRO_CHECKSUM=y
> > # CONFIG_SMP is not set
> > CONFIG_PREEMPT=y
> > CONFIG_X86_UP_APIC=y
> > CONFIG_X86_UP_IOAPIC=y
> > CONFIG_X86_LOCAL_APIC=y
> > CONFIG_X86_IO_APIC=y
> > CONFIG_X86_MCE=y
> > # CONFIG_X86_MCE_NONFATAL is not set
> > CONFIG_X86_MCE_P4THERMAL=y
> > # CONFIG_CPU_FREQ is not set
> > # CONFIG_TOSHIBA is not set
> > # CONFIG_I8K is not set
> > # CONFIG_MICROCODE is not set
> > CONFIG_X86_MSR=m
> > CONFIG_X86_CPUID=m
> > CONFIG_NOHIGHMEM=y
> > # CONFIG_HIGHMEM4G is not set
> > # CONFIG_HIGHMEM64G is not set
> > # CONFIG_MATH_EMULATION is not set
> > CONFIG_MTRR=y
> > CONFIG_HAVE_DEC_LOCK=y
> > 
> > #
> > # Power management options (ACPI, APM)
> > #
> > 
> > #
> > # ACPI Support
> > #
> > # CONFIG_ACPI is not set
> > # CONFIG_PM is not set
> > # CONFIG_APM is not set
> > # CONFIG_SOFTWARE_SUSPEND is not set
> > 
> > #
> > # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> > #
> > CONFIG_PCI=y
> > # CONFIG_PCI_GOBIOS is not set
> > # CONFIG_PCI_GODIRECT is not set
> > CONFIG_PCI_GOANY=y
> > CONFIG_PCI_BIOS=y
> > CONFIG_PCI_DIRECT=y
> > CONFIG_PCI_NAMES=y
> > # CONFIG_ISA is not set
> > # CONFIG_EISA is not set
> > # CONFIG_MCA is not set
> > CONFIG_HOTPLUG=y
> > 
> > #
> > # PCMCIA/CardBus support
> > #
> > # CONFIG_PCMCIA is not set
> > 
> > #
> > # PCI Hotplug Support
> > #
> > # CONFIG_HOTPLUG_PCI is not set
> > # CONFIG_HOTPLUG_PCI_COMPAQ is not set
> > # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
> > # CONFIG_HOTPLUG_PCI_IBM is not set
> > 
> > #
> > # Executable file formats
> > #
> > CONFIG_KCORE_ELF=y
> > # CONFIG_KCORE_AOUT is not set
> > CONFIG_BINFMT_AOUT=m
> > CONFIG_BINFMT_ELF=y
> > CONFIG_BINFMT_MISC=m
> > # CONFIG_IKCONFIG is not set
> > 
> > #
> > # Memory Technology Devices (MTD)
> > #
> > # CONFIG_MTD is not set
> > 
> > #
> > # Parallel port support
> > #
> > # CONFIG_PARPORT is not set
> > 
> > #
> > # Plug and Play configuration
> > #
> > # CONFIG_PNP is not set
> > # CONFIG_ISAPNP is not set
> > # CONFIG_PNPBIOS is not set
> > 
> > #
> > # Block devices
> > #
> > CONFIG_BLK_DEV_FD=y
> > # CONFIG_BLK_DEV_XD is not set
> > # CONFIG_PARIDE is not set
> > # CONFIG_BLK_CPQ_DA is not set
> > # CONFIG_BLK_CPQ_CISS_DA is not set
> > # CONFIG_CISS_SCSI_TAPE is not set
> > # CONFIG_BLK_DEV_DAC960 is not set
> > # CONFIG_BLK_DEV_UMEM is not set
> > CONFIG_BLK_DEV_LOOP=m
> > # CONFIG_BLK_DEV_NBD is not set
> > # CONFIG_BLK_DEV_RAM is not set
> > # CONFIG_BLK_DEV_INITRD is not set
> > 
> > #
> > # Multi-device support (RAID and LVM)
> > #
> > # CONFIG_MD is not set
> > # CONFIG_BLK_DEV_MD is not set
> > # CONFIG_MD_LINEAR is not set
> > # CONFIG_MD_RAID0 is not set
> > # CONFIG_MD_RAID1 is not set
> > # CONFIG_MD_RAID5 is not set
> > # CONFIG_MD_MULTIPATH is not set
> > # CONFIG_BLK_DEV_LVM is not set
> > 
> > #
> > # Networking options
> > #
> > CONFIG_PACKET=y
> > CONFIG_PACKET_MMAP=y
> > # CONFIG_NETLINK_DEV is not set
> > # CONFIG_NETFILTER is not set
> > # CONFIG_FILTER is not set
> > CONFIG_UNIX=y
> > CONFIG_INET=y
> > # CONFIG_IP_MULTICAST is not set
> > # CONFIG_IP_ADVANCED_ROUTER is not set
> > # CONFIG_IP_PNP is not set
> > # CONFIG_NET_IPIP is not set
> > # CONFIG_NET_IPGRE is not set
> > # CONFIG_ARPD is not set
> > # CONFIG_INET_ECN is not set
> > # CONFIG_SYN_COOKIES is not set
> > # CONFIG_IPV6 is not set
> > # CONFIG_KHTTPD is not set
> > # CONFIG_ATM is not set
> > # CONFIG_VLAN_8021Q is not set
> > 
> > #
> > #  
> > #
> > # CONFIG_IPX is not set
> > # CONFIG_ATALK is not set
> > 
> > #
> > # Appletalk devices
> > #
> > # CONFIG_DEV_APPLETALK is not set
> > # CONFIG_DECNET is not set
> > # CONFIG_BRIDGE is not set
> > # CONFIG_X25 is not set
> > # CONFIG_LAPB is not set
> > # CONFIG_LLC is not set
> > # CONFIG_NET_DIVERT is not set
> > # CONFIG_ECONET is not set
> > # CONFIG_WAN_ROUTER is not set
> > # CONFIG_NET_FASTROUTE is not set
> > # CONFIG_NET_HW_FLOWCONTROL is not set
> > 
> > #
> > # QoS and/or fair queueing
> > #
> > # CONFIG_NET_SCHED is not set
> > 
> > #
> > # Telephony Support
> > #
> > # CONFIG_PHONE is not set
> > # CONFIG_PHONE_IXJ is not set
> > # CONFIG_PHONE_IXJ_PCMCIA is not set
> > 
> > #
> > # ATA/IDE/MFM/RLL support
> > #
> > CONFIG_IDE=y
> > # CONFIG_IDE_24 is not set
> > CONFIG_IDE_25=y
> > 
> > #
> > # ATA and ATAPI Block devices
> > #
> > CONFIG_BLK_DEV_IDE=y
> > 
> > #
> > # Please see Documentation/ide.txt for help/info on IDE drives
> > #
> > # CONFIG_BLK_DEV_HD_IDE is not set
> > # CONFIG_BLK_DEV_HD is not set
> > CONFIG_BLK_DEV_IDEDISK=y
> > CONFIG_IDEDISK_MULTI_MODE=y
> > CONFIG_IDEDISK_STROKE=y
> > # CONFIG_BLK_DEV_IDECS is not set
> > CONFIG_BLK_DEV_IDECD=m
> > # CONFIG_BLK_DEV_IDETAPE is not set
> > # CONFIG_BLK_DEV_IDEFLOPPY is not set
> > CONFIG_BLK_DEV_IDESCSI=m
> > 
> > #
> > # ATA host chip set support
> > #
> > # CONFIG_BLK_DEV_CMD640 is not set
> > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> > # CONFIG_BLK_DEV_ISAPNP is not set
> > # CONFIG_BLK_DEV_RZ1000 is not set
> > 
> > #
> > #   PCI host chip set support
> > #
> > # CONFIG_BLK_DEV_OFFBOARD is not set
> > CONFIG_IDEPCI_SHARE_IRQ=y
> > CONFIG_BLK_DEV_IDEDMA_PCI=y
> > CONFIG_IDEDMA_PCI_AUTO=y
> > # CONFIG_IDEDMA_ONLYDISK is not set
> > CONFIG_BLK_DEV_IDEDMA=y
> > # CONFIG_BLK_DEV_IDE_TCQ is not set
> > # CONFIG_BLK_DEV_IDE_TCQ_DEFAULT is not set
> > # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
> > # CONFIG_BLK_DEV_AEC62XX is not set
> > # CONFIG_AEC6280_BURST is not set
> > # CONFIG_BLK_DEV_ALI15X3 is not set
> > # CONFIG_WDC_ALI15X3 is not set
> > # CONFIG_BLK_DEV_AMD74XX is not set
> > # CONFIG_BLK_DEV_CMD64X is not set
> > # CONFIG_BLK_DEV_CY82C693 is not set
> > # CONFIG_BLK_DEV_CS5530 is not set
> > # CONFIG_BLK_DEV_HPT34X is not set
> > # CONFIG_HPT34X_AUTODMA is not set
> > # CONFIG_BLK_DEV_HPT366 is not set
> > CONFIG_BLK_DEV_PIIX=y
> > # CONFIG_BLK_DEV_NS87415 is not set
> > # CONFIG_BLK_DEV_OPTI621 is not set
> > # CONFIG_BLK_DEV_PDC202XX is not set
> > # CONFIG_PDC202XX_BURST is not set
> > # CONFIG_PDC202XX_FORCE is not set
> > # CONFIG_BLK_DEV_SVWKS is not set
> > # CONFIG_BLK_DEV_SIS5513 is not set
> > # CONFIG_BLK_DEV_TRM290 is not set
> > # CONFIG_BLK_DEV_VIA82CXXX is not set
> > # CONFIG_BLK_DEV_SL82C105 is not set
> > # CONFIG_IDE_CHIPSETS is not set
> > # CONFIG_IDEDMA_IVB is not set
> > CONFIG_ATAPI=y
> > CONFIG_IDEDMA_AUTO=y
> > # CONFIG_BLK_DEV_ATARAID is not set
> > # CONFIG_BLK_DEV_ATARAID_PDC is not set
> > # CONFIG_BLK_DEV_ATARAID_HPT is not set
> > 
> > #
> > # SCSI support
> > #
> > CONFIG_SCSI=m
> > 
> > #
> > # SCSI support type (disk, tape, CD-ROM)
> > #
> > # CONFIG_BROKEN_SCSI_ERROR_HANDLING is not set
> > CONFIG_BLK_DEV_SD=m
> > CONFIG_SD_EXTRA_DEVS=40
> > # CONFIG_CHR_DEV_ST is not set
> > # CONFIG_CHR_DEV_OSST is not set
> > CONFIG_BLK_DEV_SR=m
> > # CONFIG_BLK_DEV_SR_VENDOR is not set
> > CONFIG_SR_EXTRA_DEVS=2
> > CONFIG_CHR_DEV_SG=m
> > # CONFIG_CHR_DEV_SM is not set
> > 
> > #
> > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> > #
> > CONFIG_SCSI_MULTI_LUN=y
> > CONFIG_SCSI_REPORT_LUNS=y
> > # CONFIG_SCSI_CONSTANTS is not set
> > # CONFIG_SCSI_LOGGING is not set
> > 
> > #
> > # SCSI low-level drivers
> > #
> > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> > # CONFIG_SCSI_7000FASST is not set
> > # CONFIG_SCSI_ACARD is not set
> > # CONFIG_SCSI_AIC7XXX is not set
> > # CONFIG_SCSI_AIC7XXX_OLD is not set
> > # CONFIG_SCSI_DPT_I2O is not set
> > # CONFIG_SCSI_ADVANSYS is not set
> > # CONFIG_SCSI_IN2000 is not set
> > # CONFIG_SCSI_AM53C974 is not set
> > # CONFIG_SCSI_MEGARAID is not set
> > # CONFIG_SCSI_BUSLOGIC is not set
> > # CONFIG_SCSI_CPQFCTS is not set
> > # CONFIG_SCSI_DMX3191D is not set
> > # CONFIG_SCSI_DTC3280 is not set
> > # CONFIG_SCSI_EATA is not set
> > # CONFIG_SCSI_EATA_DMA is not set
> > # CONFIG_SCSI_EATA_PIO is not set
> > # CONFIG_SCSI_FUTURE_DOMAIN is not set
> > # CONFIG_SCSI_GDTH is not set
> > # CONFIG_SCSI_GENERIC_NCR5380 is not set
> > # CONFIG_SCSI_IPS is not set
> > # CONFIG_SCSI_INITIO is not set
> > # CONFIG_SCSI_INIA100 is not set
> > # CONFIG_SCSI_NCR53C406A is not set
> > # CONFIG_SCSI_NCR53C7xx is not set
> > # CONFIG_SCSI_SYM53C8XX_2 is not set
> > # CONFIG_SCSI_NCR53C8XX is not set
> > # CONFIG_SCSI_SYM53C8XX is not set
> > # CONFIG_SCSI_PAS16 is not set
> > # CONFIG_SCSI_PCI2000 is not set
> > # CONFIG_SCSI_PCI2220I is not set
> > # CONFIG_SCSI_PSI240I is not set
> > # CONFIG_SCSI_QLOGIC_FAS is not set
> > # CONFIG_SCSI_QLOGIC_ISP is not set
> > # CONFIG_SCSI_QLOGIC_FC is not set
> > # CONFIG_SCSI_QLOGIC_1280 is not set
> > # CONFIG_SCSI_SYM53C416 is not set
> > # CONFIG_SCSI_DC390T is not set
> > # CONFIG_SCSI_T128 is not set
> > # CONFIG_SCSI_U14_34F is not set
> > # CONFIG_SCSI_DEBUG is not set
> > 
> > #
> > # Fusion MPT device support
> > #
> > # CONFIG_FUSION is not set
> > # CONFIG_FUSION_BOOT is not set
> > # CONFIG_FUSION_ISENSE is not set
> > # CONFIG_FUSION_CTL is not set
> > # CONFIG_FUSION_LAN is not set
> > 
> > #
> > # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> > #
> > # CONFIG_IEEE1394 is not set
> > 
> > #
> > # I2O device support
> > #
> > # CONFIG_I2O is not set
> > # CONFIG_I2O_PCI is not set
> > # CONFIG_I2O_BLOCK is not set
> > # CONFIG_I2O_LAN is not set
> > # CONFIG_I2O_SCSI is not set
> > # CONFIG_I2O_PROC is not set
> > 
> > #
> > # Network device support
> > #
> > CONFIG_NETDEVICES=y
> > 
> > #
> > # ARCnet devices
> > #
> > # CONFIG_ARCNET is not set
> > CONFIG_DUMMY=m
> > # CONFIG_BONDING is not set
> > # CONFIG_EQUALIZER is not set
> > # CONFIG_TUN is not set
> > # CONFIG_ETHERTAP is not set
> > 
> > #
> > # Ethernet (10 or 100Mbit)
> > #
> > CONFIG_NET_ETHERNET=y
> > # CONFIG_SUNLANCE is not set
> > # CONFIG_HAPPYMEAL is not set
> > # CONFIG_SUNBMAC is not set
> > # CONFIG_SUNQE is not set
> > # CONFIG_SUNGEM is not set
> > # CONFIG_NET_VENDOR_3COM is not set
> > # CONFIG_LANCE is not set
> > # CONFIG_NET_VENDOR_SMC is not set
> > # CONFIG_NET_VENDOR_RACAL is not set
> > # CONFIG_HP100 is not set
> > # CONFIG_NET_ISA is not set
> > CONFIG_NET_PCI=y
> > # CONFIG_PCNET32 is not set
> > # CONFIG_ADAPTEC_STARFIRE is not set
> > # CONFIG_APRICOT is not set
> > # CONFIG_CS89x0 is not set
> > # CONFIG_DGRS is not set
> > CONFIG_EEPRO100=m
> > CONFIG_E100=m
> > # CONFIG_LNE390 is not set
> > # CONFIG_FEALNX is not set
> > # CONFIG_NATSEMI is not set
> > # CONFIG_NE2K_PCI is not set
> > # CONFIG_NE3210 is not set
> > # CONFIG_ES3210 is not set
> > # CONFIG_8139CP is not set
> > # CONFIG_8139TOO is not set
> > # CONFIG_8139TOO_PIO is not set
> > # CONFIG_8139TOO_TUNE_TWISTER is not set
> > # CONFIG_8139TOO_8129 is not set
> > # CONFIG_8139_NEW_RX_RESET is not set
> > # CONFIG_SIS900 is not set
> > # CONFIG_EPIC100 is not set
> > # CONFIG_SUNDANCE is not set
> > # CONFIG_TLAN is not set
> > # CONFIG_VIA_RHINE is not set
> > # CONFIG_VIA_RHINE_MMIO is not set
> > # CONFIG_NET_POCKET is not set
> > 
> > #
> > # Ethernet (1000 Mbit)
> > #
> > # CONFIG_ACENIC is not set
> > # CONFIG_DL2K is not set
> > # CONFIG_E1000 is not set
> > # CONFIG_MYRI_SBUS is not set
> > # CONFIG_NS83820 is not set
> > # CONFIG_HAMACHI is not set
> > # CONFIG_YELLOWFIN is not set
> > # CONFIG_SK98LIN is not set
> > # CONFIG_TIGON3 is not set
> > # CONFIG_FDDI is not set
> > # CONFIG_HIPPI is not set
> > # CONFIG_PLIP is not set
> > # CONFIG_PPP is not set
> > # CONFIG_SLIP is not set
> > 
> > #
> > # Wireless LAN (non-hamradio)
> > #
> > # CONFIG_NET_RADIO is not set
> > 
> > #
> > # Token Ring devices
> > #
> > # CONFIG_TR is not set
> > # CONFIG_NET_FC is not set
> > # CONFIG_RCPCI is not set
> > # CONFIG_SHAPER is not set
> > 
> > #
> > # Wan interfaces
> > #
> > # CONFIG_WAN is not set
> > 
> > #
> > # Tulip family network device support
> > #
> > # CONFIG_NET_TULIP is not set
> > 
> > #
> > # Amateur Radio support
> > #
> > # CONFIG_HAMRADIO is not set
> > 
> > #
> > # IrDA (infrared) support
> > #
> > # CONFIG_IRDA is not set
> > 
> > #
> > # ISDN subsystem
> > #
> > # CONFIG_ISDN_BOOL is not set
> > 
> > #
> > # Input device support
> > #
> > CONFIG_INPUT=y
> > 
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_KEYBDEV=y
> > CONFIG_INPUT_MOUSEDEV=y
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > # CONFIG_INPUT_JOYDEV is not set
> > # CONFIG_INPUT_TSDEV is not set
> > CONFIG_INPUT_EVDEV=y
> > # CONFIG_INPUT_EVBUG is not set
> > 
> > #
> > # Input I/O drivers
> > #
> > # CONFIG_GAMEPORT is not set
> > CONFIG_SOUND_GAMEPORT=y
> > # CONFIG_GAMEPORT_NS558 is not set
> > # CONFIG_GAMEPORT_L4 is not set
> > # CONFIG_GAMEPORT_EMU10K1 is not set
> > # CONFIG_GAMEPORT_VORTEX is not set
> > # CONFIG_GAMEPORT_FM801 is not set
> > # CONFIG_GAMEPORT_CS461X is not set
> > CONFIG_SERIO=y
> > # CONFIG_SERIO_I8042 is not set
> > CONFIG_I8042_REG_BASE=60
> > CONFIG_I8042_KBD_IRQ=1
> > CONFIG_I8042_AUX_IRQ=12
> > # CONFIG_SERIO_SERPORT is not set
> > # CONFIG_SERIO_CT82C710 is not set
> > # CONFIG_SERIO_PARKBD is not set
> > 
> > #
> > # Input Device Drivers
> > #
> > CONFIG_INPUT_KEYBOARD=y
> > CONFIG_KEYBOARD_ATKBD=y
> > # CONFIG_KEYBOARD_SUNKBD is not set
> > # CONFIG_KEYBOARD_PS2SERKBD is not set
> > # CONFIG_KEYBOARD_XTKBD is not set
> > # CONFIG_INPUT_MOUSE is not set
> > # CONFIG_MOUSE_PS2 is not set
> > # CONFIG_MOUSE_SERIAL is not set
> > # CONFIG_MOUSE_INPORT is not set
> > # CONFIG_MOUSE_LOGIBM is not set
> > # CONFIG_MOUSE_PC110PAD is not set
> > # CONFIG_INPUT_JOYSTICK is not set
> > # CONFIG_JOYSTICK_ANALOG is not set
> > # CONFIG_JOYSTICK_A3D is not set
> > # CONFIG_JOYSTICK_ADI is not set
> > # CONFIG_JOYSTICK_COBRA is not set
> > # CONFIG_JOYSTICK_GF2K is not set
> > # CONFIG_JOYSTICK_GRIP is not set
> > # CONFIG_JOYSTICK_GUILLEMOT is not set
> > # CONFIG_JOYSTICK_INTERACT is not set
> > # CONFIG_JOYSTICK_SIDEWINDER is not set
> > # CONFIG_JOYSTICK_TMDC is not set
> > # CONFIG_JOYSTICK_IFORCE_USB is not set
> > # CONFIG_JOYSTICK_IFORCE_232 is not set
> > # CONFIG_JOYSTICK_WARRIOR is not set
> > # CONFIG_JOYSTICK_MAGELLAN is not set
> > # CONFIG_JOYSTICK_SPACEORB is not set
> > # CONFIG_JOYSTICK_SPACEBALL is not set
> > # CONFIG_JOYSTICK_STINGER is not set
> > # CONFIG_JOYSTICK_TWIDDLER is not set
> > # CONFIG_JOYSTICK_DB9 is not set
> > # CONFIG_JOYSTICK_GAMECON is not set
> > # CONFIG_JOYSTICK_TURBOGRAFX is not set
> > # CONFIG_INPUT_TOUCHSCREEN is not set
> > # CONFIG_TOUCHSCREEN_GUNZE is not set
> > 
> > #
> > # Character devices
> > #
> > CONFIG_VT=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_SERIAL=y
> > # CONFIG_SERIAL_CONSOLE is not set
> > # CONFIG_SERIAL_EXTENDED is not set
> > # CONFIG_SERIAL_NONSTANDARD is not set
> > CONFIG_UNIX98_PTYS=y
> > CONFIG_UNIX98_PTY_COUNT=256
> > 
> > #
> > # I2C support
> > #
> > CONFIG_I2C=m
> > CONFIG_I2C_ALGOBIT=m
> > # CONFIG_I2C_PHILIPSPAR is not set
> > # CONFIG_I2C_ELV is not set
> > # CONFIG_I2C_VELLEMAN is not set
> > # CONFIG_I2C_ALGOPCF is not set
> > CONFIG_I2C_CHARDEV=m
> > CONFIG_I2C_PROC=m
> > # CONFIG_QIC02_TAPE is not set
> > 
> > #
> > # Watchdog Cards
> > #
> > # CONFIG_WATCHDOG is not set
> > # CONFIG_AMD_RNG is not set
> > CONFIG_INTEL_RNG=y
> > # CONFIG_NVRAM is not set
> > CONFIG_RTC=y
> > # CONFIG_DTLK is not set
> > # CONFIG_R3964 is not set
> > # CONFIG_APPLICOM is not set
> > # CONFIG_SONYPI is not set
> > 
> > #
> > # Ftape, the floppy tape device driver
> > #
> > # CONFIG_FTAPE is not set
> > CONFIG_AGP=y
> > CONFIG_AGP_INTEL=y
> > # CONFIG_AGP_I810 is not set
> > # CONFIG_AGP_VIA is not set
> > # CONFIG_AGP_AMD is not set
> > # CONFIG_AGP_SIS is not set
> > # CONFIG_AGP_ALI is not set
> > # CONFIG_AGP_SWORKS is not set
> > CONFIG_DRM=y
> > # CONFIG_DRM_TDFX is not set
> > # CONFIG_DRM_GAMMA is not set
> > # CONFIG_DRM_R128 is not set
> > # CONFIG_DRM_RADEON is not set
> > # CONFIG_DRM_I810 is not set
> > # CONFIG_DRM_I830 is not set
> > # CONFIG_DRM_MGA is not set
> > # CONFIG_DRM_SIS is not set
> > # CONFIG_MWAVE is not set
> > 
> > #
> > # Multimedia devices
> > #
> > # CONFIG_VIDEO_DEV is not set
> > 
> > #
> > # File systems
> > #
> > # CONFIG_QUOTA is not set
> > # CONFIG_QFMT_V1 is not set
> > # CONFIG_QFMT_V2 is not set
> > # CONFIG_AUTOFS_FS is not set
> > CONFIG_AUTOFS4_FS=y
> > # CONFIG_REISERFS_FS is not set
> > # CONFIG_REISERFS_CHECK is not set
> > # CONFIG_REISERFS_PROC_INFO is not set
> > # CONFIG_ADFS_FS is not set
> > # CONFIG_ADFS_FS_RW is not set
> > # CONFIG_AFFS_FS is not set
> > # CONFIG_HFS_FS is not set
> > # CONFIG_BFS_FS is not set
> > CONFIG_EXT3_FS=y
> > CONFIG_JBD=y
> > # CONFIG_JBD_DEBUG is not set
> > CONFIG_FAT_FS=m
> > CONFIG_MSDOS_FS=m
> > # CONFIG_UMSDOS_FS is not set
> > CONFIG_VFAT_FS=m
> > # CONFIG_EFS_FS is not set
> > # CONFIG_JFFS_FS is not set
> > # CONFIG_JFFS2_FS is not set
> > # CONFIG_CRAMFS is not set
> > # CONFIG_TMPFS is not set
> > CONFIG_RAMFS=y
> > CONFIG_ISO9660_FS=m
> > CONFIG_JOLIET=y
> > # CONFIG_ZISOFS is not set
> > # CONFIG_JFS_FS is not set
> > # CONFIG_JFS_DEBUG is not set
> > # CONFIG_JFS_STATISTICS is not set
> > # CONFIG_MINIX_FS is not set
> > # CONFIG_VXFS_FS is not set
> > # CONFIG_NTFS_FS is not set
> > # CONFIG_NTFS_DEBUG is not set
> > # CONFIG_HPFS_FS is not set
> > CONFIG_PROC_FS=y
> > CONFIG_DEVFS_FS=y
> > CONFIG_DEVFS_MOUNT=y
> > # CONFIG_DEVFS_DEBUG is not set
> > # CONFIG_DEVPTS_FS is not set
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_QNX4FS_RW is not set
> > # CONFIG_ROMFS_FS is not set
> > CONFIG_EXT2_FS=m
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_UDF_FS is not set
> > # CONFIG_UDF_RW is not set
> > # CONFIG_UFS_FS is not set
> > # CONFIG_UFS_FS_WRITE is not set
> > 
> > #
> > # Network File Systems
> > #
> > # CONFIG_CODA_FS is not set
> > # CONFIG_INTERMEZZO_FS is not set
> > # CONFIG_NFS_FS is not set
> > # CONFIG_NFS_V3 is not set
> > # CONFIG_ROOT_NFS is not set
> > # CONFIG_NFSD is not set
> > # CONFIG_NFSD_V3 is not set
> > # CONFIG_NFSD_TCP is not set
> > # CONFIG_SUNRPC is not set
> > # CONFIG_LOCKD is not set
> > # CONFIG_EXPORTFS is not set
> > CONFIG_SMB_FS=y
> > # CONFIG_SMB_NLS_DEFAULT is not set
> > # CONFIG_NCP_FS is not set
> > # CONFIG_NCPFS_PACKET_SIGNING is not set
> > # CONFIG_NCPFS_IOCTL_LOCKING is not set
> > # CONFIG_NCPFS_STRONG is not set
> > # CONFIG_NCPFS_NFS_NS is not set
> > # CONFIG_NCPFS_OS2_NS is not set
> > # CONFIG_NCPFS_SMALLDOS is not set
> > # CONFIG_NCPFS_NLS is not set
> > # CONFIG_NCPFS_EXTRAS is not set
> > # CONFIG_ZISOFS_FS is not set
> > 
> > #
> > # Partition Types
> > #
> > # CONFIG_PARTITION_ADVANCED is not set
> > CONFIG_MSDOS_PARTITION=y
> > CONFIG_SMB_NLS=y
> > CONFIG_NLS=y
> > 
> > #
> > # Native Language Support
> > #
> > CONFIG_NLS_DEFAULT="iso8859-1"
> > CONFIG_NLS_CODEPAGE_437=y
> > # CONFIG_NLS_CODEPAGE_737 is not set
> > # CONFIG_NLS_CODEPAGE_775 is not set
> > # CONFIG_NLS_CODEPAGE_850 is not set
> > # CONFIG_NLS_CODEPAGE_852 is not set
> > # CONFIG_NLS_CODEPAGE_855 is not set
> > # CONFIG_NLS_CODEPAGE_857 is not set
> > # CONFIG_NLS_CODEPAGE_860 is not set
> > # CONFIG_NLS_CODEPAGE_861 is not set
> > # CONFIG_NLS_CODEPAGE_862 is not set
> > # CONFIG_NLS_CODEPAGE_863 is not set
> > # CONFIG_NLS_CODEPAGE_864 is not set
> > # CONFIG_NLS_CODEPAGE_865 is not set
> > # CONFIG_NLS_CODEPAGE_866 is not set
> > # CONFIG_NLS_CODEPAGE_869 is not set
> > # CONFIG_NLS_CODEPAGE_936 is not set
> > # CONFIG_NLS_CODEPAGE_950 is not set
> > # CONFIG_NLS_CODEPAGE_932 is not set
> > # CONFIG_NLS_CODEPAGE_949 is not set
> > # CONFIG_NLS_CODEPAGE_874 is not set
> > # CONFIG_NLS_ISO8859_8 is not set
> > # CONFIG_NLS_CODEPAGE_1250 is not set
> > # CONFIG_NLS_CODEPAGE_1251 is not set
> > CONFIG_NLS_ISO8859_1=y
> > # CONFIG_NLS_ISO8859_2 is not set
> > # CONFIG_NLS_ISO8859_3 is not set
> > # CONFIG_NLS_ISO8859_4 is not set
> > # CONFIG_NLS_ISO8859_5 is not set
> > # CONFIG_NLS_ISO8859_6 is not set
> > # CONFIG_NLS_ISO8859_7 is not set
> > # CONFIG_NLS_ISO8859_9 is not set
> > # CONFIG_NLS_ISO8859_13 is not set
> > # CONFIG_NLS_ISO8859_14 is not set
> > # CONFIG_NLS_ISO8859_15 is not set
> > # CONFIG_NLS_KOI8_R is not set
> > # CONFIG_NLS_KOI8_U is not set
> > # CONFIG_NLS_UTF8 is not set
> > 
> > #
> > # Console drivers
> > #
> > CONFIG_VGA_CONSOLE=y
> > CONFIG_VIDEO_SELECT=y
> > # CONFIG_MDA_CONSOLE is not set
> > 
> > #
> > # Frame-buffer support
> > #
> > # CONFIG_FB is not set
> > 
> > #
> > # Sound
> > #
> > CONFIG_SOUND=m
> > 
> > #
> > # Open Sound System
> > #
> > # CONFIG_SOUND_PRIME is not set
> > 
> > #
> > # Advanced Linux Sound Architecture
> > #
> > CONFIG_SND=m
> > # CONFIG_SND_SEQUENCER is not set
> > CONFIG_SND_OSSEMUL=y
> > CONFIG_SND_MIXER_OSS=m
> > CONFIG_SND_PCM_OSS=m
> > # CONFIG_SND_SEQUENCER_OSS is not set
> > CONFIG_SND_RTCTIMER=m
> > # CONFIG_SND_VERBOSE_PRINTK is not set
> > # CONFIG_SND_DEBUG is not set
> > # CONFIG_SND_DEBUG_MEMORY is not set
> > # CONFIG_SND_DEBUG_DETECT is not set
> > 
> > #
> > # Generic devices
> > #
> > # CONFIG_SND_DUMMY is not set
> > # CONFIG_SND_VIRMIDI is not set
> > # CONFIG_SND_MTPAV is not set
> > # CONFIG_SND_SERIAL_U16550 is not set
> > # CONFIG_SND_MPU401 is not set
> > 
> > #
> > # PCI devices
> > #
> > # CONFIG_SND_ALI5451 is not set
> > # CONFIG_SND_CS46XX is not set
> > CONFIG_SND_EMU10K1=m
> > # CONFIG_SND_KORG1212 is not set
> > # CONFIG_SND_NM256 is not set
> > # CONFIG_SND_RME32 is not set
> > # CONFIG_SND_RME96 is not set
> > # CONFIG_SND_RME9652 is not set
> > # CONFIG_SND_HDSP is not set
> > # CONFIG_SND_TRIDENT is not set
> > # CONFIG_SND_YMFPCI is not set
> > # CONFIG_SND_ALS4000 is not set
> > # CONFIG_SND_CMIPCI is not set
> > # CONFIG_SND_ENS1370 is not set
> > # CONFIG_SND_ENS1371 is not set
> > # CONFIG_SND_ES1938 is not set
> > # CONFIG_SND_ES1968 is not set
> > # CONFIG_SND_MAESTRO3 is not set
> > # CONFIG_SND_FM801 is not set
> > # CONFIG_SND_ICE1712 is not set
> > # CONFIG_SND_INTEL8X0 is not set
> > # CONFIG_SND_SONICVIBES is not set
> > # CONFIG_SND_VIA686 is not set
> > # CONFIG_SND_VIA8233 is not set
> > 
> > #
> > # USB support
> > #
> > CONFIG_USB=m
> > # CONFIG_USB_DEBUG is not set
> > 
> > #
> > # Miscellaneous USB options
> > #
> > CONFIG_USB_DEVICEFS=y
> > CONFIG_USB_LONG_TIMEOUT=y
> > # CONFIG_USB_BANDWIDTH is not set
> > # CONFIG_USB_DYNAMIC_MINORS is not set
> > 
> > #
> > # USB Host Controller Drivers
> > #
> > # CONFIG_USB_EHCI_HCD is not set
> > # CONFIG_USB_OHCI_HCD is not set
> > CONFIG_USB_UHCI_HCD_ALT=m
> > 
> > #
> > # USB Device Class drivers
> > #
> > # CONFIG_USB_AUDIO is not set
> > # CONFIG_USB_BLUETOOTH_TTY is not set
> > # CONFIG_USB_MIDI is not set
> > # CONFIG_USB_ACM is not set
> > # CONFIG_USB_PRINTER is not set
> > CONFIG_USB_STORAGE=m
> > # CONFIG_USB_STORAGE_DEBUG is not set
> > # CONFIG_USB_STORAGE_DATAFAB is not set
> > # CONFIG_USB_STORAGE_FREECOM is not set
> > # CONFIG_USB_STORAGE_ISD200 is not set
> > # CONFIG_USB_STORAGE_DPCM is not set
> > # CONFIG_USB_STORAGE_HP8200e is not set
> > # CONFIG_USB_STORAGE_SDDR09 is not set
> > # CONFIG_USB_STORAGE_SDDR55 is not set
> > # CONFIG_USB_STORAGE_JUMPSHOT is not set
> > 
> > #
> > # USB Human Interface Devices (HID)
> > #
> > CONFIG_USB_HID=m
> > CONFIG_USB_HIDINPUT=y
> > # CONFIG_USB_HIDDEV is not set
> > # CONFIG_USB_KBD is not set
> > # CONFIG_USB_MOUSE is not set
> > # CONFIG_USB_AIPTEK is not set
> > # CONFIG_USB_WACOM is not set
> > 
> > #
> > # USB Imaging devices
> > #
> > # CONFIG_USB_MDC800 is not set
> > # CONFIG_USB_SCANNER is not set
> > # CONFIG_USB_MICROTEK is not set
> > # CONFIG_USB_HPUSBSCSI is not set
> > 
> > #
> > # USB Multimedia devices
> > #
> > # CONFIG_USB_DABUSB is not set
> > 
> > #
> > #   Video4Linux support is needed for USB Multimedia device support
> > #
> > # CONFIG_USB_VICAM is not set
> > # CONFIG_USB_DSBR is not set
> > # CONFIG_USB_IBMCAM is not set
> > # CONFIG_USB_KONICAWC is not set
> > # CONFIG_USB_OV511 is not set
> > # CONFIG_USB_PWC is not set
> > # CONFIG_USB_SE401 is not set
> > # CONFIG_USB_STV680 is not set
> > 
> > #
> > # USB Network adaptors
> > #
> > # CONFIG_USB_CATC is not set
> > # CONFIG_USB_CDCETHER is not set
> > # CONFIG_USB_KAWETH is not set
> > # CONFIG_USB_PEGASUS is not set
> > # CONFIG_USB_RTL8150 is not set
> > # CONFIG_USB_USBNET is not set
> > 
> > #
> > # USB port drivers
> > #
> > # CONFIG_USB_USS720 is not set
> > 
> > #
> > # USB Serial Converter support
> > #
> > # CONFIG_USB_SERIAL is not set
> > # CONFIG_USB_SERIAL_GENERIC is not set
> > # CONFIG_USB_SERIAL_BELKIN is not set
> > # CONFIG_USB_SERIAL_WHITEHEAT is not set
> > # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
> > # CONFIG_USB_SERIAL_EMPEG is not set
> > # CONFIG_USB_SERIAL_FTDI_SIO is not set
> > # CONFIG_USB_SERIAL_VISOR is not set
> > # CONFIG_USB_SERIAL_IPAQ is not set
> > # CONFIG_USB_SERIAL_IR is not set
> > # CONFIG_USB_SERIAL_EDGEPORT is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
> > # CONFIG_USB_SERIAL_KEYSPAN is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
> > # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
> > # CONFIG_USB_SERIAL_KLSI is not set
> > # CONFIG_USB_SERIAL_MCT_U232 is not set
> > # CONFIG_USB_SERIAL_PL2303 is not set
> > # CONFIG_USB_SERIAL_SAFE is not set
> > # CONFIG_USB_SERIAL_SAFE_PADDED is not set
> > # CONFIG_USB_SERIAL_CYBERJACK is not set
> > # CONFIG_USB_SERIAL_XIRCOM is not set
> > # CONFIG_USB_SERIAL_OMNINET is not set
> > 
> > #
> > # USB Miscellaneous drivers
> > #
> > # CONFIG_USB_EMI26 is not set
> > # CONFIG_USB_TIGL is not set
> > # CONFIG_USB_AUERSWALD is not set
> > # CONFIG_USB_RIO500 is not set
> > # CONFIG_USB_BRLVGER is not set
> > 
> > #
> > # Bluetooth support
> > #
> > # CONFIG_BLUEZ is not set
> > 
> > #
> > # Kernel hacking
> > #
> > CONFIG_DEBUG_KERNEL=y
> > # CONFIG_DEBUG_OBSOLETE is not set
> > # CONFIG_DEBUG_SLAB is not set
> > # CONFIG_DEBUG_IOVIRT is not set
> > CONFIG_MAGIC_SYSRQ=y
> > # CONFIG_DEBUG_SPINLOCK is not set
> > # CONFIG_DEBUG_486_STRING is not set
> > # CONFIG_FRAME_POINTER is not set
> > 
> > #
> > # Library routines
> > #
> > CONFIG_CRC32=y
> > # CONFIG_ZLIB_INFLATE is not set
> > # CONFIG_ZLIB_DEFLATE is not set
> 
> 
> -- 
> Vojtech Pavlik
> SuSE Labs
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy

Re: kbd not functioning in 2.5.25-dj2

[Arnd Bergmann]

Alexander Hoogerhuis wrote:

> I mentioned this before, but I had major pains with the new input
> drivers for keyboards not working with the Comapq Armada M700's, and
> gave that up. Now I got a new Compaq N800c, which forced me onto 2.5.x
> because of some of the hardware (Intel ICH3 et al).
As I reported earlier (but appearantly unnoticed), on my Thinkpad A30p
(which uses the ICH3), keyboard and mouse don't work with the new input
layer when CONFIG_X86_UP_IOAPIC is on, but I have no problems (except
my USB mouse) when I switch that off.

> I only have two problems left is that I have a laptop with both a
> stick and a glidepad, and the psmouse driver only enables the pad, and
> not the stick. The other is that the rpm command segfaults for no
> apparent reason under 2.5.x (tried .23, 24., and .25 and -dj varieties
> of them). Same also happens with vim, second time it edits a file.

For me, the usb mouse stopped working with 2.5.25 in all configurations I
tried, the stick works without UP_IOAPIC. Unless the new input driver
is supposed to be a complete drop-in replacement for the old one, I still
assume that is a configuration error on my side.

>> On Sat, Jul 13, 2002 at 04:45:56AM -0400, Ed Sweetman wrote:
>> > CONFIG_X86_UP_IOAPIC=y

Yup, Ed has this one on as well. Alexander, what about your systems?

        Arnd <><

Re: kbd not functioning in 2.5.25-dj2

[Alexander Hoogerhuis]

Arnd Bergmann <arnd@bergmann-dalldorf.de> writes:

> Alexander Hoogerhuis wrote:
> 
> > I mentioned this before, but I had major pains with the new input
> > drivers for keyboards not working with the Comapq Armada M700's, and
> > gave that up. Now I got a new Compaq N800c, which forced me onto 2.5.x
> > because of some of the hardware (Intel ICH3 et al).
> As I reported earlier (but appearantly unnoticed), on my Thinkpad A30p
> (which uses the ICH3), keyboard and mouse don't work with the new input
> layer when CONFIG_X86_UP_IOAPIC is on, but I have no problems (except
> my USB mouse) when I switch that off.
> 
> > I only have two problems left is that I have a laptop with both a
> > stick and a glidepad, and the psmouse driver only enables the pad, and
> > not the stick. The other is that the rpm command segfaults for no
> > apparent reason under 2.5.x (tried .23, 24., and .25 and -dj varieties
> > of them). Same also happens with vim, second time it edits a file.
> 
> For me, the usb mouse stopped working with 2.5.25 in all configurations I
> tried, the stick works without UP_IOAPIC. Unless the new input driver
> is supposed to be a complete drop-in replacement for the old one, I still
> assume that is a configuration error on my side.
> 

I have it configured in, but it claims it dont have one at boot time
(and I honestly dont know if the the hardware is physically in the
box):

No local APIC present or hardware disabled

> >> On Sat, Jul 13, 2002 at 04:45:56AM -0400, Ed Sweetman wrote:
> >> > CONFIG_X86_UP_IOAPIC=y
> 
> Yup, Ed has this one on as well. Alexander, what about your systems?
> 

CONFIG_X86_GOOD_APIC=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y

>         Arnd <><
> 

mvh,
A
-- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy

Re: kbd not functioning in 2.5.25-dj2

[A Guy Called Tyketto]

On Sat, Jul 13, 2002 at 04:45:56AM -0400, Ed Sweetman wrote:
> Nope, failure.  I'm not getting any reaction from the kernel at all
> about the keyboard.  I'm including my config 
> 
> 

        You have network support compiled in. Are you able to get into the box 
remotely (ssh, telnet, etc)? If so, get onto the box, and mail me the output 
of `cat /proc/interrupts. I'd like to confirm something that's on my end as 
well. my guess is that  IRQ 1 is not listed. Another thing I should mention: 
I'm encountering this problem with 2.5.25, though I reported this in the 
2.5.20-dj tree. Vanilla 2.5.25 still has the legacy API there, so I'm able to 
fall back on that. I haven't run a -dj kernel since 2.5.20-dj3. 

> CONFIG_INPUT=y
> #
> # Userland interfaces
> #
> CONFIG_INPUT_KEYBDEV=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
> 
> CONFIG_SERIO=y
> # CONFIG_SERIO_I8042 is not set

        IIRC, CONFIG_SERIO_I8042 must be set for you to have a keyboard 
present. This is the chipset that the keyboard and mouse use. This has to be 
set to y.

> CONFIG_I8042_REG_BASE=60
> CONFIG_I8042_KBD_IRQ=1
> CONFIG_I8042_AUX_IRQ=12

        Rest looks fine. give that a go, and see what you get.

                                                        BL.
-- 
Brad Littlejohn                         | Email:        tyketto@wizard.com
Unix Systems Administrator,             |           tyketto@ozemail.com.au
Web + NewsMaster, BOFH.. Smeghead! :)   |   http://www.wizard.com/~tyketto
  PGP: 1024D/E319F0BF 6980 AAD6 7329 E9E6 D569  F620 C819 199A E319 F0BF

Re: kbd not functioning in 2.5.25-dj2

[Vojtech Pavlik]

On Sat, Jul 13, 2002 at 02:07:02AM -0700, A Guy Called Tyketto wrote:

> On Sat, Jul 13, 2002 at 04:45:56AM -0400, Ed Sweetman wrote:
> > Nope, failure.  I'm not getting any reaction from the kernel at all
> > about the keyboard.  I'm including my config 
> 
>         You have network support compiled in. Are you able to get into the box 
> remotely (ssh, telnet, etc)? If so, get onto the box, and mail me the output 
> of `cat /proc/interrupts. I'd like to confirm something that's on my end as 
> well. my guess is that  IRQ 1 is not listed. Another thing I should mention: 
> I'm encountering this problem with 2.5.25, though I reported this in the 
> 2.5.20-dj tree. Vanilla 2.5.25 still has the legacy API there, so I'm able to 
> fall back on that.

Vanilla 2.5.25 still uses the original driver even if the new one was
enabled. It isn't removed there. If both are enabled, they won't work.

-dj trees have the old driver removed, so the new one can work. In
2.5.26 (or http://linux-input.bkbits.net:8080/linux-input) the new
driver config option will disable the old one.

> I haven't run a -dj kernel since 2.5.20-dj3. 
> 
> > CONFIG_INPUT=y
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_KEYBDEV=y
> > CONFIG_INPUT_MOUSEDEV=y
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > CONFIG_INPUT_EVDEV=y
> > # CONFIG_INPUT_EVBUG is not set
> > 
> > CONFIG_SERIO=y
> > # CONFIG_SERIO_I8042 is not set
> 
>         IIRC, CONFIG_SERIO_I8042 must be set for you to have a keyboard 
> present. This is the chipset that the keyboard and mouse use. This has to be 
> set to y.
> 
> > CONFIG_I8042_REG_BASE=60
> > CONFIG_I8042_KBD_IRQ=1
> > CONFIG_I8042_AUX_IRQ=12
> 
>         Rest looks fine. give that a go, and see what you get.

-- 
Vojtech Pavlik
SuSE Labs

Re: kbd not functioning in 2.5.25-dj2

[Russell King]

On Sat, Jul 13, 2002 at 12:37:17AM -0700, A Guy Called Tyketto wrote:
>         Just a "me too" here.. I've had this problem since around 2.5.15-dj 
> and later, and have had input and keyboard support compiled into the kernel. 
> Luckily I was able to get into the box via ssh, and check things. both 
> keyboard and mouse are PS/2. If possible, see if you can do this, and check if 
> IRQ 1 is not listed in /proc/interrupts. That is what is happening with me, 
> while my mouse is working. For me to get my keyboard to work, I have to have 
> the following set:
> 
> CONFIG_INPUT=y
> CONFIG_INPUT_KEYBDEV=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_EVDEV=y
> CONFIG_INPUT_EVBUG=y
> CONFIG_SERIO=y
> CONFIG_SERIO_SERPORT=m

You're missing support for the actual PS/2 hardware itself; you've got
support for the PS/2 keyboard protocol and keyboard device, but nothing
to actually talk to the physical hardware.  You probably want to turn on:

dep_tristate '  i8042 PC Keyboard controller' CONFIG_SERIO_I8042 $CONFIG_SERIO $CONFIG_ISA

-- 
Russell King (rmk@arm.linux.org.uk)                The developer of ARM Linux
             http://www.arm.linux.org.uk/personal/aboutme.html

Re: kbd not functioning in 2.5.25-dj2

[Rudmer van Dijk]

Hi,

just tried 2.5.25-dj2 and also found a nonresponsive keyboard.
after reading this thread I enabled ATKBD_DEBUG and I8042_DEBUG_IO, this is 
the result (output from dmesg):

Linux version 2.5.25-dj2 (root@frodo) (gcc version 2.95.3 20010315 
(release)) #5 Mon Jul 15 14:25:42 CEST 2002
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 0000000000100000 - 0000000003000000 (usable)
  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
48MB LOWMEM available.
On node 0 totalpages: 12288
zone(0): 4096 pages.
zone(1): 8192 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=lin2.5 ro root=301 ether=0,0,eth1
Initializing CPU#0
Detected 99.730 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 195.07 BogoMIPS
Memory: 46820k/49152k available (863k kernel code, 1944k reserved, 203k 
data, 196k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Before vendor init, caps: 000001bf 00000000 00000000, vendor = 0
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After vendor init, caps: 000001bf 00000000 00000000 00000000
CPU:     After generic, caps: 000001bf 00000000 00000000 00000000
CPU:             Common caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 06
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfd9d1, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Starting kswapd
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec: init pool 0, 1 entries, 12 bytes
biovec: init pool 1, 4 entries, 48 bytes
biovec: init pool 2, 16 entries, 192 bytes
biovec: init pool 3, 64 entries, 768 bytes
biovec: init pool 4, 128 entries, 1536 bytes
biovec: init pool 5, 256 entries, 3072 bytes
Limiting direct PCI/PCI transfers.
pty: 256 Unix98 ptys configured
block: 160 slots per queue, batch=32
RAMDISK driver initialized: 1 RAM disks of 512K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX: IDE controller on PCI bus 00 dev 38
PIIX: chipset revision 2
PIIX: not 100% native mode: will probe irqs later
PIIX: neither IDE port enabled (BIOS)
hda: QUANTUM FIREBALL640A, ATA DISK drive
hdc: QUANTUM FIREBALL640A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 1253952 sectors (642 MB) w/83KiB Cache, CHS=622/32/63
hdc: 1253952 sectors (642 MB) w/83KiB Cache, CHS=1244/16/63
  hda: hda1 hda2
  hdc: [PTBL] [622/32/63] hdc1 hdc2
i8042.c: 20 -> i8042 (command) [0]
i8042.c: 65 <- i8042 (return) [0]
i8042.c: 60 -> i8042 (command) [1]
i8042.c: 74 -> i8042 (parameter) [1]
i8042.c: 60 -> i8042 (command) [1]
i8042.c: 65 -> i8042 (parameter) [1]
atkbd.c: Sent: f5
i8042.c: f5 -> i8042 (kbd-data) [1]
i8042.c: 60 -> i8042 (command) [2]
i8042.c: 74 -> i8042 (parameter) [2]
i8042.c: fa <- i8042 (interrupt-kbd) [3]
atkbd.c: Received fa
serio: i8042 KBD port at 0x60,0x64 irq 1
i8042.c: d3 -> i8042 (command) [3]
i8042.c: 5a -> i8042 (parameter) [3]
i8042.c: a5 <- i8042 (return) [3]
i8042.c: a9 -> i8042 (command) [3]
i8042.c: 00 <- i8042 (return) [3]
i8042.c: a7 -> i8042 (command) [4]
i8042.c: 20 -> i8042 (command) [4]
i8042.c: 74 <- i8042 (return) [4]
i8042.c: a9 -> i8042 (command) [4]
i8042.c: 00 <- i8042 (return) [4]
i8042.c: a8 -> i8042 (command) [4]
i8042.c: 20 -> i8042 (command) [4]
i8042.c: 54 <- i8042 (return) [4]
i8042.c: 60 -> i8042 (command) [5]
i8042.c: 74 -> i8042 (parameter) [5]
i8042.c: 60 -> i8042 (command) [5]
i8042.c: 56 -> i8042 (parameter) [5]
atkbd.c: Sent: f5
i8042.c: d4 -> i8042 (command) [5]
i8042.c: f5 -> i8042 (parameter) [5]
i8042.c: 60 -> i8042 (command) [5]
i8042.c: 56 -> i8042 (parameter) [5]
i8042.c: fe <- i8042 (interrupt-aux) [6]
atkbd.c: Received fe
i8042.c: 60 -> i8042 (command) [6]
i8042.c: 74 -> i8042 (parameter) [6]
serio: i8042 AUX port at 0x60,0x64 irq 12
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x300: 00 00 b4 65 19 22
eth0: NE2000 found at 0x300, using IRQ 3.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 196k freed
Adding 42328k swap on /dev/hda2.  Priority:-1 extents:1
i8042.c: 60 -> i8042 (command) [20639]
i8042.c: 56 -> i8042 (parameter) [20639]
i8042.c: d4 -> i8042 (command) [20639]
i8042.c: f6 -> i8042 (parameter) [20639]
i8042.c: 60 -> i8042 (command) [20639]
i8042.c: 56 -> i8042 (parameter) [20639]
i8042.c: fa <- i8042 (interrupt-aux) [20640]
i8042.c: d4 -> i8042 (command) [20640]
i8042.c: f2 -> i8042 (parameter) [20640]
i8042.c: 60 -> i8042 (command) [20640]
i8042.c: 56 -> i8042 (parameter) [20640]
i8042.c: fa <- i8042 (interrupt-aux) [20641]
i8042.c: 00 <- i8042 (interrupt-aux) [20643]
i8042.c: d4 -> i8042 (command) [20643]
i8042.c: e8 -> i8042 (parameter) [20643]
i8042.c: 60 -> i8042 (command) [20643]
i8042.c: 56 -> i8042 (parameter) [20643]
i8042.c: fa <- i8042 (interrupt-aux) [20644]
i8042.c: d4 -> i8042 (command) [20644]
i8042.c: 03 -> i8042 (parameter) [20644]
i8042.c: 60 -> i8042 (command) [20644]
i8042.c: 56 -> i8042 (parameter) [20644]
i8042.c: fa <- i8042 (interrupt-aux) [20645]
i8042.c: d4 -> i8042 (command) [20645]
i8042.c: e6 -> i8042 (parameter) [20645]
i8042.c: 60 -> i8042 (command) [20645]
i8042.c: 56 -> i8042 (parameter) [20645]
i8042.c: fa <- i8042 (interrupt-aux) [20646]
i8042.c: d4 -> i8042 (command) [20646]
i8042.c: e6 -> i8042 (parameter) [20646]
i8042.c: 60 -> i8042 (command) [20646]
i8042.c: 56 -> i8042 (parameter) [20646]
i8042.c: fa <- i8042 (interrupt-aux) [20647]
i8042.c: d4 -> i8042 (command) [20647]
i8042.c: e6 -> i8042 (parameter) [20647]
i8042.c: 60 -> i8042 (command) [20648]
i8042.c: 56 -> i8042 (parameter) [20648]
i8042.c: fa <- i8042 (interrupt-aux) [20649]
i8042.c: d4 -> i8042 (command) [20649]
i8042.c: e9 -> i8042 (parameter) [20649]
i8042.c: 60 -> i8042 (command) [20649]
i8042.c: 56 -> i8042 (parameter) [20649]
i8042.c: fa <- i8042 (interrupt-aux) [20651]
i8042.c: 00 <- i8042 (interrupt-aux) [20652]
i8042.c: 03 <- i8042 (interrupt-aux) [20654]
i8042.c: 64 <- i8042 (interrupt-aux) [20656]
i8042.c: d4 -> i8042 (command) [20656]
i8042.c: e8 -> i8042 (parameter) [20656]
i8042.c: 60 -> i8042 (command) [20656]
i8042.c: 56 -> i8042 (parameter) [20656]
i8042.c: fa <- i8042 (interrupt-aux) [20657]
i8042.c: d4 -> i8042 (command) [20657]
i8042.c: 00 -> i8042 (parameter) [20657]
i8042.c: 60 -> i8042 (command) [20657]
i8042.c: 56 -> i8042 (parameter) [20657]
i8042.c: fa <- i8042 (interrupt-aux) [20658]
i8042.c: d4 -> i8042 (command) [20658]
i8042.c: e6 -> i8042 (parameter) [20658]
i8042.c: 60 -> i8042 (command) [20659]
i8042.c: 56 -> i8042 (parameter) [20659]
i8042.c: fa <- i8042 (interrupt-aux) [20660]
i8042.c: d4 -> i8042 (command) [20660]
i8042.c: e6 -> i8042 (parameter) [20660]
i8042.c: 60 -> i8042 (command) [20660]
i8042.c: 56 -> i8042 (parameter) [20660]
i8042.c: fa <- i8042 (interrupt-aux) [20661]
i8042.c: d4 -> i8042 (command) [20662]
i8042.c: e6 -> i8042 (parameter) [20662]
i8042.c: 60 -> i8042 (command) [20662]
i8042.c: 56 -> i8042 (parameter) [20662]
i8042.c: fa <- i8042 (interrupt-aux) [20663]
i8042.c: d4 -> i8042 (command) [20663]
i8042.c: e9 -> i8042 (parameter) [20663]
i8042.c: 60 -> i8042 (command) [20663]
i8042.c: 56 -> i8042 (parameter) [20663]
i8042.c: fa <- i8042 (interrupt-aux) [20664]
i8042.c: 00 <- i8042 (interrupt-aux) [20666]
i8042.c: 00 <- i8042 (interrupt-aux) [20667]
i8042.c: 64 <- i8042 (interrupt-aux) [20669]
i8042.c: d4 -> i8042 (command) [20669]
i8042.c: f3 -> i8042 (parameter) [20669]
i8042.c: 60 -> i8042 (command) [20669]
i8042.c: 56 -> i8042 (parameter) [20669]
i8042.c: fa <- i8042 (interrupt-aux) [20670]
i8042.c: d4 -> i8042 (command) [20670]
i8042.c: c8 -> i8042 (parameter) [20670]
i8042.c: 60 -> i8042 (command) [20670]
i8042.c: 56 -> i8042 (parameter) [20670]
i8042.c: fa <- i8042 (interrupt-aux) [20671]
i8042.c: d4 -> i8042 (command) [20672]
i8042.c: f3 -> i8042 (parameter) [20672]
i8042.c: 60 -> i8042 (command) [20672]
i8042.c: 56 -> i8042 (parameter) [20672]
i8042.c: fa <- i8042 (interrupt-aux) [20673]
i8042.c: d4 -> i8042 (command) [20673]
i8042.c: 64 -> i8042 (parameter) [20673]
i8042.c: 60 -> i8042 (command) [20673]
i8042.c: 56 -> i8042 (parameter) [20673]
i8042.c: fa <- i8042 (interrupt-aux) [20674]
i8042.c: d4 -> i8042 (command) [20674]
i8042.c: f3 -> i8042 (parameter) [20674]
i8042.c: 60 -> i8042 (command) [20674]
i8042.c: 56 -> i8042 (parameter) [20674]
i8042.c: fa <- i8042 (interrupt-aux) [20675]
i8042.c: d4 -> i8042 (command) [20675]
i8042.c: 50 -> i8042 (parameter) [20675]
i8042.c: 60 -> i8042 (command) [20675]
i8042.c: 56 -> i8042 (parameter) [20675]
i8042.c: fa <- i8042 (interrupt-aux) [20676]
i8042.c: d4 -> i8042 (command) [20676]
i8042.c: f2 -> i8042 (parameter) [20676]
i8042.c: 60 -> i8042 (command) [20676]
i8042.c: 56 -> i8042 (parameter) [20676]
i8042.c: fa <- i8042 (interrupt-aux) [20677]
i8042.c: 03 <- i8042 (interrupt-aux) [20679]
i8042.c: d4 -> i8042 (command) [20679]
i8042.c: f3 -> i8042 (parameter) [20679]
i8042.c: 60 -> i8042 (command) [20680]
i8042.c: 56 -> i8042 (parameter) [20680]
i8042.c: fa <- i8042 (interrupt-aux) [20681]
i8042.c: d4 -> i8042 (command) [20681]
i8042.c: c8 -> i8042 (parameter) [20681]
i8042.c: 60 -> i8042 (command) [20681]
i8042.c: 56 -> i8042 (parameter) [20681]
i8042.c: fa <- i8042 (interrupt-aux) [20683]
i8042.c: d4 -> i8042 (command) [20683]
i8042.c: f3 -> i8042 (parameter) [20683]
i8042.c: 60 -> i8042 (command) [20683]
i8042.c: 56 -> i8042 (parameter) [20683]
i8042.c: fa <- i8042 (interrupt-aux) [20684]
i8042.c: d4 -> i8042 (command) [20684]
i8042.c: c8 -> i8042 (parameter) [20684]
i8042.c: 60 -> i8042 (command) [20684]
i8042.c: 56 -> i8042 (parameter) [20684]
i8042.c: fa <- i8042 (interrupt-aux) [20685]
i8042.c: d4 -> i8042 (command) [20685]
i8042.c: f3 -> i8042 (parameter) [20685]
i8042.c: 60 -> i8042 (command) [20685]
i8042.c: 56 -> i8042 (parameter) [20685]
i8042.c: fa <- i8042 (interrupt-aux) [20686]
i8042.c: d4 -> i8042 (command) [20686]
i8042.c: 50 -> i8042 (parameter) [20686]
i8042.c: 60 -> i8042 (command) [20686]
i8042.c: 56 -> i8042 (parameter) [20686]
i8042.c: fa <- i8042 (interrupt-aux) [20687]
i8042.c: d4 -> i8042 (command) [20687]
i8042.c: f2 -> i8042 (parameter) [20687]
i8042.c: 60 -> i8042 (command) [20687]
i8042.c: 56 -> i8042 (parameter) [20687]
i8042.c: fa <- i8042 (interrupt-aux) [20688]
i8042.c: 03 <- i8042 (interrupt-aux) [20690]
input: ImPS/2 Microsoft IntelliMouse on isa0060/serio1
i8042.c: d4 -> i8042 (command) [20691]
i8042.c: f3 -> i8042 (parameter) [20691]
i8042.c: 60 -> i8042 (command) [20691]
i8042.c: 56 -> i8042 (parameter) [20691]
i8042.c: fa <- i8042 (interrupt-aux) [20692]
i8042.c: d4 -> i8042 (command) [20692]
i8042.c: 64 -> i8042 (parameter) [20692]
i8042.c: 60 -> i8042 (command) [20692]
i8042.c: 56 -> i8042 (parameter) [20692]
i8042.c: fa <- i8042 (interrupt-aux) [20693]
i8042.c: d4 -> i8042 (command) [20693]
i8042.c: f3 -> i8042 (parameter) [20693]
i8042.c: 60 -> i8042 (command) [20693]
i8042.c: 56 -> i8042 (parameter) [20693]
i8042.c: fa <- i8042 (interrupt-aux) [20694]
i8042.c: d4 -> i8042 (command) [20694]
i8042.c: c8 -> i8042 (parameter) [20694]
i8042.c: 60 -> i8042 (command) [20695]
i8042.c: 56 -> i8042 (parameter) [20695]
i8042.c: fa <- i8042 (interrupt-aux) [20696]
i8042.c: d4 -> i8042 (command) [20696]
i8042.c: e8 -> i8042 (parameter) [20696]
i8042.c: 60 -> i8042 (command) [20696]
i8042.c: 56 -> i8042 (parameter) [20696]
i8042.c: fa <- i8042 (interrupt-aux) [20697]
i8042.c: d4 -> i8042 (command) [20698]
i8042.c: 03 -> i8042 (parameter) [20698]
i8042.c: 60 -> i8042 (command) [20698]
i8042.c: 56 -> i8042 (parameter) [20698]
i8042.c: fa <- i8042 (interrupt-aux) [20699]
i8042.c: d4 -> i8042 (command) [20699]
i8042.c: e6 -> i8042 (parameter) [20699]
i8042.c: 60 -> i8042 (command) [20699]
i8042.c: 56 -> i8042 (parameter) [20699]
i8042.c: fa <- i8042 (interrupt-aux) [20700]
i8042.c: d4 -> i8042 (command) [20700]
i8042.c: ea -> i8042 (parameter) [20700]
i8042.c: 60 -> i8042 (command) [20700]
i8042.c: 56 -> i8042 (parameter) [20700]
i8042.c: fa <- i8042 (interrupt-aux) [20701]
i8042.c: d4 -> i8042 (command) [20701]
i8042.c: f4 -> i8042 (parameter) [20701]
i8042.c: 60 -> i8042 (command) [20701]
i8042.c: 56 -> i8042 (parameter) [20701]
i8042.c: fa <- i8042 (interrupt-aux) [20702]
i8042.c: 60 -> i8042 (command) [20702]
i8042.c: 47 -> i8042 (parameter) [20702]
i8042.c: f6 -> i8042 (kbd-data) [20702]
i8042.c: fa <- i8042 (interrupt-kbd) [20705]
i8042.c: f2 -> i8042 (kbd-data) [20705]
i8042.c: fa <- i8042 (interrupt-kbd) [20709]
i8042.c: ab <- i8042 (interrupt-kbd) [20710]
i8042.c: 60 -> i8042 (command) [20710]
i8042.c: 56 -> i8042 (parameter) [20710]
i8042.c: 60 -> i8042 (command) [21755]
i8042.c: 74 -> i8042 (parameter) [21755]
i8042.c: 60 -> i8042 (command) [21755]
i8042.c: 56 -> i8042 (parameter) [21755]
atkbd.c: Sent: f5
i8042.c: d4 -> i8042 (command) [21756]
i8042.c: f5 -> i8042 (parameter) [21756]
i8042.c: 60 -> i8042 (command) [21756]
i8042.c: 56 -> i8042 (parameter) [21756]
i8042.c: fa <- i8042 (interrupt-aux) [21757]
atkbd.c: Received fa
atkbd.c: Sent: f2
i8042.c: d4 -> i8042 (command) [21757]
i8042.c: f2 -> i8042 (parameter) [21757]
i8042.c: 60 -> i8042 (command) [21758]
i8042.c: 56 -> i8042 (parameter) [21758]
i8042.c: fa <- i8042 (interrupt-aux) [21759]
atkbd.c: Received fa
i8042.c: 03 <- i8042 (interrupt-aux) [21761]
atkbd.c: Received 03
i8042.c: 60 -> i8042 (command) [21766]
i8042.c: 74 -> i8042 (parameter) [21766]
i8042.c: 60 -> i8042 (command) [21766]
i8042.c: 65 -> i8042 (parameter) [21766]
atkbd.c: Sent: f5
i8042.c: f5 -> i8042 (kbd-data) [21766]
i8042.c: 60 -> i8042 (command) [21767]
i8042.c: 74 -> i8042 (parameter) [21767]
i8042.c: fa <- i8042 (interrupt-kbd) [21768]
atkbd.c: Received fa

funny thing is that with 2.5.15-dj1 the keyboard is also dead on boot but 
after 'modprobe psmouse.o' followed by 'rmmod psmouse.o' it works. This 
same behaviour is in almost every -dj kernel from 15 till 24 so I put this 
loading and unloading of psmouse.o in my bootscripts but for 25-dj2 it does 
not work anymore...

on linux-2.5.15-dj1 it says after loading psmouse.o this:
Jul 15 16:04:28 frodo kernel: input: ImPS/2 Microsoft IntelliMouse on 
isa0060/serio1
Jul 15 16:04:28 frodo kernel: input: AT Set 2 keyboard on isa0060/serio0

system is a IBM PC 330 P75 (upgraded to a p100) with a IBM 101 PS/2 Keyboard

relevant part of .config:
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_I8042_REG_BASE=60
CONFIG_I8042_KBD_IRQ=1
CONFIG_I8042_AUX_IRQ=12
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m

If you need more info please ask

	Rudmer