[parisc-linux] About the 2.4.19-pa0 kernel ...

[parisc-linux] About the 2.4.19-pa0 kernel ...

[kenneth westelinck]

Hi all,

Yesterday I've built the 2.4.19-pa0 kernel and it seems to work fine at
first sight (I did a make oldconfig with the config from the 2.4.18-pa56).
However, the powerbutton ceased working. It was working fine with the
2.4.18-pa56 kernel. Has anything changed near the code that handles this?
Can someone else with a 712 confirm this behaviour?
If you need my config, I'll send it tonight as I don't have access to this
box during the day :(
Thanks a lot.


regards,

Kenneth

Re: [parisc-linux] About the 2.4.19-pa0 kernel ...

[Ralf Hildebrandt]

On Tue, Aug 06, 2002 at 09:03:47AM +0200, kenneth westelinck wrote:

> Yesterday I've built the 2.4.19-pa0 kernel and it seems to work fine at
> first sight (I did a make oldconfig with the config from the 2.4.18-pa56).
> However, the powerbutton ceased working. It was working fine with the
> 2.4.18-pa56 kernel. Has anything changed near the code that handles this?
> Can someone else with a 712 confirm this behaviour?

The power button on a 712/80 works just fine with 2.4.19-pa2!

-- 
Ralf Hildebrandt (Im Auftrag des Referat V A)   Ralf.Hildebrandt@charite.de
Charite Campus Virchow-Klinikum                 Tel.  +49 (0)30-450 570-155
Referat V A - Kommunikationsnetze -             Fax.  +49 (0)30-450 570-916
To sysadmin or not to sysadmin... that is the question, whether tis
nobler in the minde to suffer the slings and arrowes of outragious
fortune, or climb to the top of the building with a fucking high-power
rifle and scope. 

Re: [parisc-linux] About the 2.4.19-pa0 kernel ...

[kenneth westelinck]

Thanks for your reply. I'll try a newer kernel version tonight.

----- Original Message -----
From: "Ralf Hildebrandt" <Ralf.Hildebrandt@charite.de>
To: "kenneth westelinck" <kennywest1@hotmail.com>
Cc: <parisc-linux@parisc-linux.org>
Sent: Thursday, August 08, 2002 2:10 PM
Subject: Re: [parisc-linux] About the 2.4.19-pa0 kernel ...


> On Tue, Aug 06, 2002 at 09:03:47AM +0200, kenneth westelinck wrote:
>
> > Yesterday I've built the 2.4.19-pa0 kernel and it seems to work fine at
> > first sight (I did a make oldconfig with the config from the
2.4.18-pa56).
> > However, the powerbutton ceased working. It was working fine with the
> > 2.4.18-pa56 kernel. Has anything changed near the code that handles
this?
> > Can someone else with a 712 confirm this behaviour?
>
> The power button on a 712/80 works just fine with 2.4.19-pa2!
>
> --
> Ralf Hildebrandt (Im Auftrag des Referat V A)
Ralf.Hildebrandt@charite.de
> Charite Campus Virchow-Klinikum                 Tel.  +49 (0)30-450
570-155
> Referat V A - Kommunikationsnetze -             Fax.  +49 (0)30-450
570-916
> To sysadmin or not to sysadmin... that is the question, whether tis
> nobler in the minde to suffer the slings and arrowes of outragious
> fortune, or climb to the top of the building with a fucking high-power
> rifle and scope.
>