From: "Heinz J . Mauelshagen" <mauelshagen@sistina.com>
To: linux-lvm@sistina.com
Subject: Re: [linux-lvm] Help! unable to mount lv's - can't see why!
Date: Thu Sep 19 08:55:12 2002 [thread overview]
Message-ID: <20020919155047.B1017@sistina.com> (raw)
In-Reply-To: <020301c25fca$239f7340$1c01a8c0@internal.tripnet.int>; from red@tripany.com on Thu, Sep 19, 2002 at 12:45:47PM +0200
On Thu, Sep 19, 2002 at 12:45:47PM +0200, Robin Edgar - Tripany wrote:
> Fair enough, but I would very much like to access the files and determine
> later what has errors and what doesn't - at the moment, I can only do this
> with the docu lv and none of the others...
>
> You were right, I did manage to get a whole load of lost+found entries using
> fsck after the mount. The docu entry was on the physical extent though, and
> seems to be working fine.
> Anyway I thought I'd upgrade LVM to 1.0.5 from 1.0.1 and refit the disks to
> the 'old' configuration (4 disks + 1 for backup), to do a pvmove.
> Now when I do a pvscan, it finds all the disks, but also the disk I did the
> dd to, as part of the vg. So I de-activated the vg, and tried to reduce the
> vg /dev/hdb1, hoiwever this is not working:
>
> # vgreduce tripserv_vol /dev/hdb1
> vgreduce -- ERROR: can't reduce volume group "tripserv_vol" by used physical
> volume "/dev/hdb1"
Well, LVM still has allocated extents on that PV. You can just remove
empty PVs from a VG.
>
> # pvscan -v
> pvscan -- reading all physical volumes (this may take a while...)
> pvscan -- walking through all physical volumes found
> pvscan -- ACTIVE PV "/dev/hdg1" of VG "tripserv_vol" [38.16 GB / 7.93 GB
> free]
> pvscan -- ACTIVE PV "/dev/hdh1" of VG "tripserv_vol" [38.16 GB / 8.01 GB
> free]
> pvscan -- inactive PV "/dev/hde1" of VG "tripserv_vol" [55.91 GB / 0 free]
> pvscan -- ACTIVE PV "/dev/hdf1" of VG "tripserv_vol" [55.91 GB / 3.37 GB
> free]
> pvscan -- ACTIVE PV "/dev/hdb1" of VG "tripserv_vol" [55.91 GB / 0 free]
> pvscan -- total: 5 [244.08 GB] / in use: 5 [244.08 GB] / in no VG: 0 [0]
>
> If i vgchange -a n it will deactivate them all, but then I get:
> # vgreduce tripserv_vol /dev/hdb1
> vgreduce -- ERROR: volume group "tripserv_vol" is not active
Doesn't change the situation, because the PV still has extents allocated.
A PV must be empty and the VG active in order to remove it from the VG.
>
> After I restore the vg to it's 'old' configuration, I want to empty
> /dev/hdb1 and add it to the volume group. Then doing a pvmove -i /dev/hde1
> should move all the data it can find there to the rest of the vg shouldn't
> it?
Yes, presuming that you've got enought space to fit all extents allocated
to /dev/hde1.
>
> Thank you for all your help so far,
You're welcome.
Regards,
Heinz -- The LVM Guy --
> Robin Edgar
>
> ----- Original Message -----
> From: "Heinz J . Mauelshagen" <mauelshagen@sistina.com>
> To: <linux-lvm@sistina.com>
> Sent: Thursday, September 19, 2002 12:04 PM
> Subject: Re: [linux-lvm] Help! unable to mount lv's - can't see why!
>
>
> > On Wed, Sep 18, 2002 at 04:42:54PM +0200, Robin Edgar - Tripany wrote:
> > > Doing the lvdisplay -v shows that pv /dev/hde1 had bits of all of the
> lv's
> > > on it (including the docu lv, which I *can* mount).
> >
> > Then it is most likely, that all filesystems will have errors.
> >
> > Regards,
> > Heinz -- The LVM Guy --
> >
> >
> > >
> > > ----- Original Message -----
> > > From: "Heinz J . Mauelshagen" <mauelshagen@sistina.com>
> > > To: <linux-lvm@sistina.com>
> > > Sent: Wednesday, September 18, 2002 3:59 PM
> > > Subject: Re: [linux-lvm] Help! unable to mount lv's - can't see why!
> > >
> > >
> > > > On Wed, Sep 18, 2002 at 03:56:36PM +0200, Robin Edgar - Tripany wrote:
> > > > > I've discovered that there is a problem with /all/ the superblocks
> > > except for those of the /docu lv (see below). It does lead me to another
> > > question though - only one of the HDs crashed: is it possible that LVM
> wrote
> > > all the superblocks on 1 HD?! If so this seems like a pretty serious bug
> in
> > <SNIP>
> > > > linux-lvm mailing list
> > > > linux-lvm@sistina.com
> > > > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > > > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> > > >
> > > >
> > >
> > >
> > >
> > > _______________________________________________
> > > linux-lvm mailing list
> > > linux-lvm@sistina.com
> > > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> >
> > *** Software bugs are stupid.
> > Nevertheless it needs not so stupid people to solve them ***
> >
> >
> > _______________________________________________
> > linux-lvm mailing list
> > linux-lvm@sistina.com
> > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> >
> >
>
>
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf
Germany
Mauelshagen@Sistina.com +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2002-09-19 8:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-18 6:37 [linux-lvm] Help! unable to mount lv's - can't see why! Robin Edgar - Tripany
2002-09-18 8:20 ` Heinz J . Mauelshagen
2002-09-18 9:07 ` Robin Edgar - Tripany
2002-09-19 5:10 ` Heinz J . Mauelshagen
2002-09-18 8:27 ` Robin Edgar - Tripany
2002-09-18 9:01 ` Heinz J . Mauelshagen
2002-09-18 9:17 ` Robin Edgar - Tripany
2002-09-19 5:05 ` Heinz J . Mauelshagen
2002-09-19 5:17 ` Robin Edgar - Tripany
2002-09-19 8:55 ` Heinz J . Mauelshagen [this message]
2002-09-19 9:36 ` Robin Edgar - Tripany
2002-09-19 14:09 ` Heinz J . Mauelshagen
2002-09-20 4:29 ` Robin Edgar - Tripany
2002-09-20 4:51 ` Heinz J . Mauelshagen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020919155047.B1017@sistina.com \
--to=mauelshagen@sistina.com \
--cc=linux-lvm@sistina.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.